Shear peel test

This article or the following section is not adequately provided with supporting documents ( e.g. individual evidence ). Information without sufficient evidence could be removed soon. Please help Wikipedia by researching the information and including good evidence.

The shear peel test (also known as the shear peel test) is a mechanical shear strength test method. This procedure is grouped under the destructive material test . Here, the shear strength of electrically contacted lines on piezomechanical modules is determined under the load of pulling the line from the soldering point . The pull-off direction is to be selected parallel to the plane of the solder joint, with the pull-off being carried out using a shear chisel.