Dodge M37
File:M37big.jpg Dodge M37 Specifications
¾ ton Cargo Truck (Cross Country Rating, 1 ton Highway Rating)
Engine
Model...T245 Dodge
Type..."L" Head, 6 Cylinder
Horsepower...BHP-78at 3200 RPM
Displacement...230.2 cu. in.
Bore...3 1/4" Stroke...4 5/8"
Oil Capacity...6 qt.
Radiator Capacity...25 qt.
Clutch
Borg & Beck...Model 11828 10"
Single Plate Dry Disc
Fuel System
Carter Carburetor...Model ETW-1 Down Draft
25 Gallon Tank (vented through engine air intake for fording purposes)
Electrical Ignition, Starting, Lights, 24 volts
Transmission
New Process...Model 88950 (or NP420)
4 Speed, Synchro-Shift in 3rd and 4th gear
Transfer Case
New Process...88845 (or NP200)
Ratio...High 1:1, low 1.96:1
Twin lever operation, one for 4x4 or 4x2 selection, one for hi or low range
Drive Shaft MFG...Universal Products
Axles Dodge Full Floating (Hypoid) Ratio...5.83:1
Front Universal Drive...New Process (tracta joint)
Brakes
Wagner...Hydraulic drum
Parking- External Contracting Band...48 Sq. In
Steering
Gemmer Model B-60...Worm and Sector Type
Wheelbase
Cargo Model M37...112" Command Model M42...112"
Ambulance Model M43...126" Tele. Maint. Model V41...126"
Weight
M37 w/o Winch...5687 lbs., M37 w/w5987 lbs.
Tire Size
9.00 x 16 - 8 ply Non-Directional Military
Highway
Speed 55 MPH, Range 150 miles (6mpg)
Winch
Braden LU-4, PTO operated, 7500lb capacity (250’ 7/16" wire rope – 10’ chain w/hook)
Torque Specifications (p124 of TM 9-1840A, Ordnance Maintenance Engine (Dodge Model T-245) Clutch (Borg and Beck Model 11828)main bearing cap screws, 80-85 lb-ft, connecting rod hex nuts, 45-50 lb-ft, cylinder head bolts, 65-70 lb-ft, cranking jaw, 110 lb-ft minimum, intake and exhaust manifold stud nuts 15-20 lb-ft