Mud tank: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
Mudgineer (talk | contribs)
+pic
Added mud tank manufacturer
Line 7: Line 7:


For a typical petroleum drilling rig there are normally 2 tanks. Each tank is sectioned off into smaller separate compartments designed for more specific purposes, such as a settling tank (sometimes called a sand trap), used to allow solids such as sand to settle out of the drilling fluid before it flows into the next compartment. Other compartments will have agitators (which are large fan blades) that stir the fluid to prevent the chemical constituents of the drilling fluid from settling out.
For a typical petroleum drilling rig there are normally 2 tanks. Each tank is sectioned off into smaller separate compartments designed for more specific purposes, such as a settling tank (sometimes called a sand trap), used to allow solids such as sand to settle out of the drilling fluid before it flows into the next compartment. Other compartments will have agitators (which are large fan blades) that stir the fluid to prevent the chemical constituents of the drilling fluid from settling out.

==External links==
;Mud Tank Manufacturers
* [http://www.appmach.com/drillingrigfabrication.html Applied Machinery] – Mud Tank Manufacturer





Revision as of 18:46, 9 October 2008

The mud tank is the long gray container

A Mud tank is an open-top container, typically made of steel, used as a reserve store for the active circulation of the drilling fluid on a drilling rig. They are often called mud pits, which comes from the fact that they used to be nothing more than pits dug out of the earth.


The tanks are open-top and will have walkways on top of them to allow traversing and visual observation of the drilling fluid and to monitor the level of fluid in the tanks. The walkways also allow access to other equipment mounted on top of the mud tanks.


For a typical petroleum drilling rig there are normally 2 tanks. Each tank is sectioned off into smaller separate compartments designed for more specific purposes, such as a settling tank (sometimes called a sand trap), used to allow solids such as sand to settle out of the drilling fluid before it flows into the next compartment. Other compartments will have agitators (which are large fan blades) that stir the fluid to prevent the chemical constituents of the drilling fluid from settling out.

External links

Mud Tank Manufacturers