DIN-VDE standards part 2
List of VDE standards from VDE 0200 to VDE 0299
DIN notation | VDE notation | was standing | Standard content |
---|---|---|---|
VDE-AR-N 4201 application rule | 2010-11 | Network documentation | |
VDE-AR-N 4202 application rule | 2015-04 | Procedure for integrating cables in 110 kV high-voltage overhead line networks | |
DIN VDE 0207 | VDE 0207 supplement 1 | 2005-02 | Insulation and sheath mixtures for cables and insulated lines - directory of the standards of the series DIN VDE 0207 (VDE 0207) |
DIN VDE 0207-4 | VDE 0207-4 | 1986-06 | Insulating and sheath compounds for cables and insulated lines - PVC insulating compounds |
DIN VDE 0207-5 | VDE 0207-5 | 1986-07 | Insulation and sheath mixtures for cables and insulated lines - PVC sheath mixtures |
DIN VDE 0207-6 | VDE 0207-6 | 2004-10 | Insulating and sheathing compounds for cables and insulated lines - fluorine-containing polymers |
DIN VDE 0207-20 | VDE 0207-20 | 1993-07 | Insulating and sheathing compounds for cables and insulated lines - rubber insulating compounds |
DIN VDE 0207-21 | VDE 0207-21 | 1993-07 | Insulating and sheath compounds for cables and insulated lines - rubber sheath compounds |
DIN VDE 0207-24 | VDE 0207-24 | 1986-02 | Insulating and sheath mixtures for cables and insulated lines - halogen-free sheath mixtures |
DIN EN 50363-0 | VDE 0207-363-0 | 2012-03 | Insulating, sheathing and sheathing materials for low voltage cables and lines - Part 0: General introduction; - German version EN 50363-0: 2011 |
DIN EN 50363-1 | VDE 0207-363-1 | 2006-10 | Insulating, sheathing and sheathing materials for low voltage cables and lines - Part 1: Cross-linked, elastomeric insulating compounds; - German version EN 50363-1: 2005 |
DIN EN 50363-2-1 | VDE 0207-363-2-1 | 2006-10 | Insulating, sheathing and sheathing materials for low voltage cables and lines - Part 2-1: Cross-linked, elastomeric sheath compounds; - German version EN 50363-2-1: 2005 |
DIN EN 50363-2-1 / A1 | VDE 0207-363-2-1 / A1 | 2012-03 | Insulating, sheathing and sheathing materials for low voltage cables and lines - Part 2-1: Cross-linked, elastomeric sheath compounds; - German version EN 50363-2-1: 2005 / A1: 2011 |
DIN EN 50363-2-2 | VDE 0207-363-2-2 | 2006-10 | Insulating, sheathing and sheathing materials for low voltage cables and lines - Part 2-2: Crosslinked, elastomeric sheathing compounds; - German version EN 50363-2-2: 2005 |
DIN EN 50363-3 | VDE 0207-363-3 | 2006-10 | Insulating, sheathing and sheathing materials for low voltage cables and lines - Part 3: PVC insulation compounds; - German version EN 50363-3: 2005 |
DIN EN 50363-3 / A1 | VDE 0207-363-3 / A1 | 2012-03 | Insulating, sheathing and sheathing materials for low voltage cables and lines - Part 3: PVC insulation compounds; - German version EN 50363-3: 2005 / A1: 2011 |
DIN EN 50363-4-1 | VDE 0207-363-4-1 | 2006-10 | Insulating, sheathing and sheathing materials for low voltage cables and lines - Part 4-1: PVC sheath compounds; - German version EN 50363-4-1: 2005 |
DIN EN 50363-4-2 | VDE 0207-363-4-2 | 2006-10 | Insulating, sheathing and sheathing materials for low voltage cables and lines - Part 4-2: PVC sheathing mixtures; - German version EN 50363-4-2: 2005 |
DIN EN 50363-5 | VDE 0207-363-5 | 2006-10 | Insulating, sheathing and sheathing materials for low voltage cables and lines - Part 5: Halogen-free, cross-linked insulating compounds; - German version EN 50363-5: 2005 |
DIN EN 50363-5 / A1 | VDE 0207-363-5 / A1 | 2012-03 | Insulating, sheathing and sheathing materials for low voltage cables and lines - Part 5: Halogen-free, cross-linked insulating compounds; - German version EN 50363-5: 2005 / A1: 2011 |
DIN EN 50363-6 | VDE 0207-363-6 | 2006-10 | Insulating, sheathing and sheathing materials for low-voltage cables and lines - Part 6: Halogen-free, cross-linked sheathing mixtures; - German version EN 50363-6: 2005 |
DIN EN 50363-6 / A1 | VDE 0207-363-6 / A1 | 2012-03 | Insulating, sheathing and sheathing materials for low-voltage cables and lines - Part 6: Halogen-free, cross-linked sheathing mixtures; - German version EN 50363-6: 2005 / A1: 2011 |
DIN EN 50363-7 | VDE 0207-363-7 | 2006-10 | Insulating, sheathing and sheathing materials for low voltage cables and lines - Part 7: Halogen-free, thermoplastic insulating compounds; - German version EN 50363-7: 2005 |
DIN EN 50363-8 | VDE 0207-363-8 | 2006-10 | Insulating, sheathing and sheathing materials for low voltage cables and lines - Part 8: Halogen-free, thermoplastic sheathing mixtures; - German version EN 50363-8: 2005 |
DIN EN 50363-8 / A1 | VDE 0207-363-8 / A1 | 2012-03 | Insulating, sheathing and sheathing materials for low voltage cables and lines - Part 8: Halogen-free, thermoplastic sheathing mixtures; - German version EN 50363-8: 2005 / A1: 2011 |
DIN EN 50363-9-1 | VDE 0207-363-9-1 | 2006-10 | Insulating, sheathing and sheathing materials for low-voltage cables and lines - Part 9-1: Various insulating compounds - Cross-linked polyvinyl chloride (XLPVC); - German version EN 50363-9-1: 2005 |
DIN EN 50363-10-1 | VDE 0207-363-10-1 | 2006-10 | Insulating, sheathing and sheathing materials for low voltage cables and lines - Part 10-1: Various sheathing mixtures - Cross-linked polyvinyl chloride (XLPVC); - German version EN 50363-10-1: 2005 |
DIN EN 50363-10-2 | VDE 0207-363-10-2 | 2006-10 | Insulating, sheathing and sheathing materials for low voltage cables and lines - Part 10-2: Various sheathing mixtures - Thermoplastic polyurethane; - German version EN 50363-10-2: 2005 |
DIN EN 50341-1 | VDE 0210-1 | 2013-11 | Overhead lines over AC 1 kV - Part 1: General requirements - Common specifications; - German version EN 503411: 2012 |
DIN EN 50341-2 | VDE 0210-2 | 2002-11 | Overhead lines over AC 45 kV - Index of the NNA (National Normative Specifications) - German version EN 50341-2: 2001 |
DIN EN 50341-2-4 | VDE 0210-2-4 | 2016-04 | Overhead lines over AC 1 kV - Part 2-4: National normative specifications (NNA) for Germany (based on EN 503411: 2012); - German version EN 50341-2-4: 2016 |
VDE-AR-N 4210-3 application rule | 2011-05 | Test and evaluation procedures for determining the load-bearing capacity of components made of Thomasstahl in steel lattice overhead line pylons with nominal voltages from 110 kV | |
VDE-AR-N 4210-4 application rule | 2014-08 | Requirements for the reliability of existing bases of overhead lines | |
VDE-AR-N 4210-5 application rule | 2011-04 | Weather-dependent overhead line operation | |
DIN EN 50423 | VDE 0210-10 supplement 1 | 2007-10 | Overhead lines above AC 1 kV up to and including AC 45 kV - Supplement 1: General requirements and normative specifications for Germany (NNA) |
DIN EN 50423-2 | VDE 0210-11 | 2005-05 | Overhead lines above AC 1 kV up to and including AC 45 kV - Part 2: Index of the NNA (national normative specifications); - German version EN 50423-2: 2005 |
VDE-AR-N 4210-11 application rule | 2011-08 | Bird protection on medium-voltage overhead lines | |
DIN EN 60652 | VDE 0210-15 | 2004-06 | Load tests on overhead line structures - (IEC 60652: 2002); German version EN 60652: 2004 |
DIN EN 61773 | VDE 0210-20 | 1997-08 | Overhead lines - Testing of structural foundations - (IEC 61773: 1996); German version EN 61773: 1996 |
DIN VDE 0211 | VDE 0211 | 1985-12 | Construction of overhead power lines with nominal voltages of up to 1000 V. |
DIN EN 61284 | VDE 0212-1 | 1998-05 | Overhead lines - Requirements and tests for valves - (IEC 61284: 1997); German version EN 61284: 1997 |
DIN EN 61854 | VDE 0212-2 | 1999-08 | Overhead lines - Requirements and tests for field spacers - (IEC 61854: 1998); German version EN 61854: 1998 |
DIN EN 61897 | VDE 0212-3 | 1999-08 | Overhead lines - Requirements and tests for vibration dampers - Stockbridge type - (IEC 61897: 1998); German version EN 61897: 1998 |
DIN VDE 0212-51 | VDE 0212-51 | 1986-07 | Fittings for overhead lines and switchgear - dynamic-mechanical behavior of vibration protection fittings |
DIN VDE 0212-54 | VDE 0212-54 | 1986-09 | Fittings for overhead lines and switchgear - hot-dip galvanizing |
DIN VDE 0212-55 | VDE 0212-55 | 1989-04 | Fittings for overhead lines and switchgear - Insulation behavior of fittings for insulated overhead lines |
DIN EN 62004 | VDE 0212-303 | 2010-05 | Heat resistant aluminum alloy wires for conductors of overhead lines - (IEC 62004: 2007, modified); German version EN 62004: 2009 |
DIN EN 62420 | VDE 0212-354 | 2009-03 | Conductors for overhead lines made of concentrically stranded round wires with one or more spaces - (IEC 62420: 2008); German version EN 62420: 2008 |
DIN EN 50540 | VDE 0212-355 | 2011-04 | Overhead line conductors - aluminum conductors supported by coated steel (ACSS version); - German version EN 50540: 2010 |
DIN EN 62567 | VDE 0212-356 | 2014-07 | Overhead lines - Methods for testing the self-damping properties of conductors - (IEC 62567: 2013); German version EN 62567: 2013 |
DIN VDE 0212-399 | VDE 0212-399 | 2015-05 | Conductors for overhead lines - conductors made of concentrically stranded round galvanized steel wires |
DIN VDE V 0212-490 | VDE V 0212-490 | 2014-12 | Fittings for overhead lines - Part 490: Components for bird protection - Requirements and tests |
DIN VDE 0216 | VDE 0216 | 1986-02 | Fittings for contact line systems - Static-mechanical behavior - Requirements, testing |
VDE-AR-N 4220 application rule | 2015-08 | Civil engineering contractors - minimum requirements | |
DIN 57220-3 | VDE 0220-3 | 1977-10 | Single and multiple cable clamps with insulating parts in high-voltage cable systems up to 1000 V. |
DIN EN 61238-1 | VDE 0220-100 | 2004-03 | Compression connectors and screw connectors for power cables for rated voltages up to and including 36 kV (Um = 42 kV) - Part 1: Test methods and requirements - (IEC 61238-1: 2003); German version EN 61238-1: 2003 |
VDE-AR-N 4221 application rule | 2016-05 | Minimum requirements for companies performing cable laying | |
DIN VDE 0228-3 | VDE 0228-3 | 1988-09 | Measures to be taken when telecommunications systems are influenced by high-voltage systems - influence by alternating current railway systems |
DIN VDE 0228-4 | VDE 0228-4 | 1987-12 | Measures when telecommunications systems are influenced by high-voltage systems - influence by direct current railway systems |
DIN 57250-1 | VDE 0250-1 | 1981-10 | Insulated power lines - general specifications |
DIN VDE 0250-102 | VDE 0250-102 | 1991-07 | Insulated power cables - heat-resistant PVC wiring cable in twin design |
DIN 57250-106 | VDE 0250-106 | 1982-10 | Insulated power cables - EFTE single conductor |
DIN VDE 0250-201 | VDE 0250-201 | 1992-09 | Insulated power lines - ribbon cable |
DIN VDE 0250-204 | VDE 0250-204 | 2000-12 | Insulated power cables - NYM PVC installation cable |
DIN 57250-206 | VDE 0250-206 | 1983-10 | Insulated power lines - PVC sheathed cable with carrying rope |
DIN VDE 0250-210 | VDE 0250-210 | 1985-02 | Insulated power lines - lead-sheathed line |
DIN 57250-212 | VDE 0250-212 | 1982-06 | Insulated power cables - screened PVC cable |
DIN VDE 0250-213 | VDE 0250-213 | 1986-08 | Insulated power lines - roof rack entry lines |
DIN VDE 0250-214 | VDE 0250-214 | 2002-04 | Insulated power cables - installation cable NHXMH with improved behavior in the event of fire |
DIN VDE 0250-215 | VDE 0250-215 | 2002-04 | Insulated power cables - installation cable NHMH with special properties in case of fire |
DIN VDE 0250-502 | VDE 0250-502 | 1985-03 | Insulated power lines - heat-resistant silicone grommet |
DIN VDE 0250-602 | VDE 0250-602 | 1985-03 | Insulated power cables - special rubber core cables |
DIN VDE 0250-605 | VDE 0250-605 | 2006-06 | Insulated power cables - Part 605: Shielded cables with rubber insulation and PVC sheath nominal voltage U0 / U 3.6 / 6 kV and 6/10 kV |
DIN VDE 0250-802 | VDE 0250-802 | 1985-02 | Insulated power lines - theater line |
DIN VDE 0250-806 | VDE 0250-806 | 1992-09 | Insulated power lines - rubber hose line NMHVÖU |
DIN VDE 0250-809 | VDE 0250-809 | 1985-05 | Insulated power cables - rubber flat cable |
DIN VDE 0250-811 | VDE 0250-811 | 1985-02 | Insulated power lines - rubber hose line NSHCÖU |
DIN VDE 0250-812 | VDE 0250-812 | 1985-05 | Insulated power lines - rubber hose line NSSHÖU |
DIN VDE 0250-813 | VDE 0250-813 | 1985-05 | Insulated power lines - cable ropes |
DIN VDE 0250-814 | VDE 0250-814 | 1985-02 | Insulated power lines - rubber hose line NSHTÖU |
DIN VDE 0253 | VDE 0253 | 1987-12 | Insulated heating cables |
DIN EN 50264-1 | VDE 0260-264-1 | 2009-03 | Railway applications - Power and control cables for rail vehicles with improved behavior in the event of fire - Part 1: General requirements; - German version EN 50264-1: 2008 |
DIN EN 50264-2-1 | VDE 0260-264-2-1 | 2009-03 | Railway applications - Power and control cables for rail vehicles with improved behavior in the event of fire - Part 2-1: Cables with cross-linked elastomeric insulation - Single core cables; - German version EN 50264-2-1: 2008 |
DIN EN 50264-2-2 | VDE 0260-264-2-2 | 2009-03 | Railway applications - Power and control cables for rail vehicles with improved behavior in the event of fire - Part 2-2: Cables with cross-linked elastomeric insulation - Multi-core and multi-core cables; - German version EN 50264-2-2: 2008 |
DIN EN 50264-3-1 | VDE 0260-264-3-1 | 2009-03 | Railway applications - Power and control cables for rail vehicles with improved behavior in the event of fire - Part 3-1: Cables with crosslinked elastomeric insulation with reduced dimensions - Single core cables; - German version EN 50264-3-1: 2008 |
DIN EN 50264-3-2 | VDE 0260-264-3-2 | 2009-03 | Railway applications - Power and control cables for rail vehicles with improved behavior in the event of fire - Part 3-2: Cables with cross-linked elastomeric insulation with reduced dimensions - Multi-core and multi-core cables; - German version EN 50264-3-2: 2008 |
DIN EN 50305 | VDE 0260-305 | 2003-03 | Railway applications - Cables and wires for rail vehicles with improved behavior in the event of fire - Test methods - German version EN 50305: 2002 |
DIN EN 50305 | VDE 0260-305 correction 1 | 2008-02 | Corrections to DIN EN 50305 (VDE 0260-305): 2003-03 |
DIN EN 50306-1 | VDE 0260-306-1 | 2003-05 | Railway applications - Cables and lines for rail vehicles with improved behavior in the event of fire - Reduced insulation wall thicknesses - General requirements - German version EN 50306-1: 2002 |
DIN EN 50306-2 | VDE 0260-306-2 | 2003-05 | Railway applications - Cables and lines for rail vehicles with improved behavior in the event of fire - Reduced insulation wall thicknesses - Single core cables and lines - German version EN 50306-2: 2002 |
DIN EN 50306-3 | VDE 0260-306-3 | 2003-05 | Railway applications - Cables and lines for rail vehicles with improved behavior in the event of fire - Reduced insulation wall thicknesses - Single and multi-core cables and lines (pairs, threes, fours) shielded with reduced jacket wall thicknesses - German version EN 50306-3: 2002 |
DIN EN 50306-4 | VDE 0260-306-4 | 2003-05 | Railway applications - Cables and lines for rail vehicles with improved behavior in the event of fire - Reduced insulation wall thicknesses - Multi-core and multi-pair cables with standard jacket wall thicknesses - German version EN 503064: 2002 |
DIN EN 50355 | VDE 0260-355 | 2015-02 | Railway applications - Cables and wires for rail vehicles with improved behavior in the event of fire - Guidelines for use; - German version EN 50355: 2013 |
DIN EN 50382-1 | VDE 0260-382-1 | 2009-02 | Railway applications - High temperature cables and lines for rail vehicles with improved behavior in the event of fire - Part 1: General requirements; - German version EN 50382-1: 2008 |
DIN EN 50382-1 / A1 | VDE 0260-382-1 / A1 | 2014-11 | Railway applications - High temperature cables and lines for rail vehicles with improved behavior in the event of fire - Part 1: General requirements; - German version EN 50382-1: 2008 / A1: 2013 |
DIN EN 50382-2 | VDE 0260-382-2 | 2009-02 | Railway applications - High temperature cables and lines for rail vehicles with improved behavior in the event of fire - Part 2: Single core silicone insulated cables for 120 ° C or 150 ° C; - German version EN 50382-2: 2008 |
DIN EN 50382-2 / A1 | VDE 0260-382-2 / A1 | 2014-11 | Railway applications - High temperature cables and lines for rail vehicles with improved behavior in the event of fire - Part 2: Single core silicone insulated cables for 120 ° C or 150 ° C; - German version EN 50382-2: 2008 / A1: 2013 |
DIN VDE 0262 | VDE 0262 | 1995-12 | Installation cable with insulation made of cross-linked polyethylene and sheath made of thermoplastic PVC with a nominal voltage of 0.6 / 1 kV |
DIN VDE 0262 | VDE 0262 correction 1 | 2004-01 | Corrections to DIN VDE 0262 (VDE 0262): 1995-12 |
DIN VDE 0265 | VDE 0265 | 1995-12 | Cable with plastic insulation and lead sheath for high-voltage systems |
DIN VDE 0266 | VDE 0266 | 2000-03 | Power cables with improved behavior in the event of fire - rated voltages 0.6 / 1 kV |
DIN VDE 0266 | VDE 0266 correction 1 | 2006-03 | Corrections to DIN VDE 0266 (VDE 0266): 2000-03 |
DIN VDE 0271 | VDE 0271 | 2007-01 | Power cables - Specifications for power cables from 0.6 / 1 kV for special applications |
DIN VDE 0271 | VDE 0271 correction 1 | 2008-02 | Corrections to DIN VDE 0271 (VDE 0271): 2007-01 |
DIN IEC 60183 | VDE 0276-183 | 2016-03 | Guideline for the selection of AC high voltage cable systems - (IEC 60183: 2015) |
DIN EN 50397-1 | VDE 0276-397-1 | 2007-07 | Plastic-covered conductors and associated fittings for overhead lines with nominal voltages above 1 kV and not more than 36 kV alternating voltage - Part 1: Plastic-covered overhead line cables; - German version EN 50397-1: 2006 |
DIN EN 50397-2 | VDE 0276-397-2 | 2010-05 | Plastic-covered conductors and associated fittings for overhead lines with nominal voltages above 1 kV and not more than 36 kV alternating voltage - Part 2: Fittings for plastic-covered overhead line cables - Tests and requirements; - German version EN 50397-2: 2009 |
DIN EN 50397-3 | VDE 0276-397-3 | 2011-01 | Plastic sheathed conductors and associated fittings for overhead lines with voltages above 1 kV and not more than 36 kV AC - Part 3: Guidelines for use; - German version EN 50397-3: 2010 |
DIN VDE 0276-603 | VDE 0276-603 | 2010-03 | Power cables - Part 603: Power distribution cables with nominal voltage 0.6 / 1 kV; - German version HD 603 S1: 1994 / A3: 2007, parts 0, 1, 3 G and 5 G |
DIN VDE 0276-604 | VDE 0276-604 | 2008-02 | Power cables - Part 604: Power cables with nominal voltages 0.6 / 1 kV with improved behavior in the event of fire for power plants; - German version HD 604 S1: 1994 + A1: 1997 + A2: 2002 + A3: 2005, parts 0, 1 and 5 G |
DIN VDE 0276-605 | VDE 0276-605 | 2009-07 | Power cables - Supplementary test methods; - German version HD 605 S2: 2008 |
DIN VDE 0276-620 | VDE 0276-620 | 2010-11 | Power cables - Power distribution cables with extruded insulation for rated voltages from 3.6 / 6 (7.2) kV up to and including 20.8 / 36 (42) kV; - German version HD 620 S2: 2010, parts 0, 1 and 10-C |
DIN VDE 0276-621 | VDE 0276-621 | 1997-05 | Power cables - power distribution cables with impregnated paper insulation for medium voltage; - German version HD 621 S1: 1996; Parts 1, 2, 3C, 4C |
DIN VDE 0276-622 | VDE 0276-622 | 2006-05 | Power cables - Part 622: Power cables with nominal voltages from 3.6 / 6 (7.2) kV to 20.8 / 36 (42) kV with improved behavior in the event of fire for power plants; - German version HD 622 S1: 1996 + A1: 2000 + A2: 2005, part 1 and part 4D |
DIN VDE 0276-626 | VDE 0276-626 | 1997-01 | Power cables - Insulated overhead cables for overhead distribution networks with nominal voltages of 0.6 / 1 (1.2) kV; - German version HD 626 S1 parts 1, 2 and 4F-1: 1996 |
DIN VDE 0276-626 / A1 | VDE 0276-626 / A1 | 1998-07 | Power cables - Insulated overhead cables for overhead distribution networks with nominal voltages of 0.6 / 1 (1.2) kV; - German version HD 626 S1 / A1: 1997 |
DIN VDE 0276-627 | VDE 0276-627 | 2006-09 | Power cables - Part 627: Multi-core and multi-pair cables for installation in the air and in the ground; - German version HD 627 S1: 1996 + A1: 2000 + A2: 2005, parts 0, 1, 4H and 7H |
DIN VDE 0276-632 | VDE 0276-632 | 1999-05 | Power cables with extruded insulation and their accessories - rated voltages above 36 kV to 150 kV; - German version HD 632 S1 parts 1, 3D, 4D, 5D: 1998 |
DIN VDE 0276-633 | VDE 0276-633 | 1999-05 | Tests on oil cables with insulation made of paper or polypropylene-coated paper and metal sheath and accessories - AC voltages up to and including 400 kV; - German version HD 633 S1 parts 1, 3D: 1997 |
DIN VDE 0276-634 | VDE 0276-634 | 1999-05 | Tests on internal gas pressure cables and accessories - AC voltages up to and including 275 kV; - German version HD 634 S1 parts 1, 3C: 1997 |
DIN VDE 0276-635 | VDE 0276-635 | 1999-05 | Tests on external gas pressure cables and accessories - AC voltages up to and including 275 kV; - German version HD 635 S1 parts 1, 3C: 1997 |
DIN VDE 0276-1000 | VDE 0276-1000 | 1995-06 | Power cables - current carrying capacity, general; Conversion factors |
DIN IEC 62067 | VDE 0276-2067 | 2013-08 | Power cables with extruded insulation and their accessories for nominal voltages above 150 kV (Um = 170 kV) up to and including 500 kV (Um = 550 kV) - Test methods and requirements - (IEC 62067: 2011) |
DIN EN 50393 | VDE 0278-393 | 2015-10 | Test methods and test requirements for the sets of distribution cables with a nominal voltage of 0.6 / 1.0 (1.2) kV; - German version EN 50393: 2015 |
DIN EN 61442 | VDE 0278-442 | 2006-01 | Test method for power cable accessories with a nominal voltage of 6 kV (Um = 7.2 kV) to 36 kV (Um = 42 kV) - (IEC 61442: 2005, modified); German version EN 61442: 2005 |
DIN EN 50483-1 | VDE 0278-483-1 | 2009-11 | Test requirements for components for insulated low voltage overhead lines - Part 1: General; - German version EN 504831: 2009 |
DIN EN 50483-2 | VDE 0278-483-2 | 2009-11 | Test requirements for components for insulated low voltage overhead lines - Part 2: Anchoring and support clamps for self-supporting insulated overhead line cables; - German version EN 50483-2: 2009 |
DIN EN 50483-3 | VDE 0278-483-3 | 2009-11 | Test requirements for components for insulated low voltage overhead lines - Part 3: Bracing and support clamps for systems with neutral conductor support cable; - German version EN 50483-3: 2009 |
DIN EN 50483-4 | VDE 0278-483-4 | 2009-11 | Test requirements for components for insulated low voltage overhead lines - Part 4: Connectors; - German version EN 504834: 2009 |
DIN EN 50483-5 | VDE 0278-483-5 | 2009-11 | Test requirements for components for insulated low voltage overhead lines - Part 5: Electrical aging tests; - German version EN 50483-5: 2009 |
DIN EN 50483-6 | VDE 0278-483-6 | 2009-11 | Test requirements for components for insulated low voltage overhead lines - Part 6: Environmental tests; - German version EN 50483-6: 2009 |
DIN VDE 0278-629-1 | VDE 0278-629-1 | 2009-07 | Test requirements for cable accessories for power cables with a nominal voltage of 3.6 / 6 (7.2) kV to 20.8 / 36 (42) kV - Part 1: Cables with extruded plastic insulation; - German version HD 629.1 S2: 2006 + A1: 2008 |
DIN VDE 0278-629-2 | VDE 0278-629-2 | 2009-07 | Test requirements for cable accessories for power cables with a nominal voltage of 3.6 / 6 (7.2) kV to 20.8 / 36 (42) kV - Part 2: Cables with mass-impregnated paper insulation; - German version HD 629.2 S2: 2006 + A1: 2008 |
DIN VDE 0278-631-1 | VDE 0278-631-1 | 2008-12 | Cables and insulated wires - Accessories - Material characterization - Part 1: Fingerprint and type tests for reaction resin compounds; - German version HD 631.1 S2: 2007 |
DIN VDE 0278-631-2 | VDE 0278-631-2 | 2008-12 | Cables and insulated wires - Accessories - Material characterization - Part 2: Fingerprint and type tests for heat shrinkable components for low voltage applications; - German version HD 631.2 S1: 2007 |
DIN VDE 0278-631-3 | VDE 0278-631-3 | 2009-05 | Cables and insulated wires - Accessories - Material characterization - Part 3: Fingerprint tests for heat-shrinkable components for medium voltage applications from 3.6 / 6 (7.2) kV to 20.8 / 36 (42) kV; - German version HD 631.3 S1: 2008 |
DIN VDE 0278-631-4 | VDE 0278-631-4 | 2009-05 | Cables and insulated lines - Accessories - Material characterization - Part 4: Fingerprint tests for cold-shrinking components for low and medium voltage applications up to 20.8 / 36 (42) kV; - German version HD 631.4 S1: 2008 |
DIN 57279 | VDE 0279 | 1982-10 | Line fittings for underground mining - sleeves 0.6 / 1 kV |
DIN VDE 0281-8 | VDE 0281-8 | 2000-09 | Polyvinyl chloride-insulated cables with nominal voltages up to 450/750 V - Single-core cables without sheath for light chains; German version HD 21.8 S2: 1999 |
DIN VDE 0281-9 | VDE 0281-9 | 2001-01 | Polyvinyl chloride-insulated cables with nominal voltages up to 450/750 V - Single-core cables without jacket for laying at low temperatures; - German version HD 21.9 S2: 1995 + A1: 1999 |
DIN EN 50143 | VDE 0283-1 | 2010-02 | Cables for fluorescent tube devices and fluorescent tube systems with an open circuit voltage of more than 1,000 V but not more than 10,000 V; - German version EN 50143: 2009 |
DIN EN 50214 | VDE 0283-2 | 2007-10 | Flat PVC-sheathed control cables; - German version EN 50214: 2006 |
DIN EN 61138 | VDE 0283-3 | 2008-10 | Cables for portable earthing and short-circuiting devices - (IEC 61138: 2007, modified); German version EN 61138: 2007 |
VDE-AR-E 2283-5 application rule | 2012-07 | Requirements for charging cables for electric vehicles and plug-in hybrid vehicles | |
DIN EN 50618 | VDE 0283-618 | 2015-11 | Cables and lines - Lines for photovoltaic systems; - German version EN 50618: 2014 |
DIN EN 60702-1 | VDE 0284-1 | 2015-08 | Mineral insulated cables with a nominal voltage up to 750 V - Part 1: Cables - (IEC 60702-1: 2002 + A1: 2015); German version EN 60702-1: 2002 + A1: 2015 |
DIN EN 60702-2 | VDE 0284-2 | 2015-08 | Mineral-insulated cables with a nominal voltage up to 750 V - Part 2: Terminations - (IEC 60702-2: 2002 + A1: 2015); German version EN 60702-2: 2002 + A1: 2015 |
DIN VDE 0284-3 | VDE 0284-3 | 2002-05 | Mineral insulated cables with a nominal voltage up to 750 V - Part 3: Application guide; - German version HD 586.3 S1: 2001 |
DIN EN 50525-1 | VDE 0285-525-1 | 2012-01 | Cables and wires - Power lines with nominal voltages up to 450/750 V (U0 / U) - Part 1: General requirements; - German version EN 50525-1: 2011 |
DIN EN 50525-2-11 | VDE 0285-525-2-11 | 2012-01 | Cables and wires - Low voltage energy cables of rated voltages up to 450/750 V (U0 / U) - Part 2-11: High voltage cables for general applications - Flexible cables with thermoplastic PVC insulation; - German version EN 50525-2-11: 2011 |
DIN EN 50525-2-12 | VDE 0285-525-2-12 | 2012-01 | Cables and wires - Power cables with nominal voltages up to 450/750 V (U0 / U) - Part 2-12: Power cables for general applications - Coiled cables with thermoplastic PVC insulation; - German version EN 50525-2-12: 2011 |
DIN EN 50525-2-21 | VDE 0285-525-2-21 | 2012-01 | Cables and wires - Power cables with nominal voltages up to 450/750 V (U0 / U) - Part 2-21: Power cables for general applications - Flexible cables with cross-linked elastomer insulation; - German version EN 50525-2-21: 2011 |
DIN EN 50525-2-22 | VDE 0285-525-2-22 | 2012-01 | Cables and wires - Power cables with nominal voltages up to 450/750 V (U0 / U) - Part 2-22: Power cables for general applications - Highly flexible braided cables with cross-linked elastomer insulation; - German version EN 50525-2-22: 2011 |
DIN EN 50525-2-31 | VDE 0285-525-2-31 | 2012-01 | Cables and wires - Power cables with nominal voltages up to 450/750 V (U0 / U) - Part 2-31: Power cables for general applications - Core and wiring cables with thermoplastic PVC insulation; - German version EN 50525-2-31: 2011 |
DIN EN 50525-2-41 | VDE 0285-525-2-41 | 2012-01 | Cables and wires - Power cables with nominal voltages up to 450/750 V (U0 / U) - Part 2-41: Power cables for general applications - Single core cables with crosslinked silicone insulation; - German version EN 50525-2-41: 2011 |
DIN EN 50525-2-42 | VDE 0285-525-2-42 | 2012-01 | Cables and wires - Power cables with nominal voltages up to 450/750 V (U0 / U) - Part 2-42: Power cables for general applications - Core and wiring cables with cross-linked EVA insulation; - German version EN 50525-242: 2011 |
DIN EN 50525-2-51 | VDE 0285-525-2-51 | 2012-01 | Cables and wires - Power cables with rated voltages up to 450/750 V (U0 / U) - Part 2-51: Power cables for general applications - Oil-resistant control cables with thermoplastic PVC insulation; - German version EN 505252-51: 2011 |
DIN EN 50525-2-71 | VDE 0285-525-2-71 | 2012-01 | Cables and wires - Power cables with nominal voltages up to 450/750 V (U0 / U) - Part 2-71: Power cables for general applications - Litz wires with thermoplastic PVC insulation; - German version EN 50525-2-71: 2011 |
DIN EN 50525-2-72 | VDE 0285-525-2-72 | 2012-01 | Cables and wires - Power cables with nominal voltages up to 450/750 V (U0 / U) - Part 2-72: Power cables for general applications - Separable twin cables with thermoplastic PVC insulation; - German version EN 50525-272: 2011 |
DIN EN 50525-2-81 | VDE 0285-525-2-81 | 2012-01 | Cables and wires - Power cables with nominal voltages up to 450/750 V (U0 / U) - Part 2-81: Power cables for general applications - Arc welding cables with cross-linked elastomer sheath; - German version EN 50525-281: 2011 |
DIN EN 50525-2-82 | VDE 0285-525-2-82 | 2012-01 | Cables and wires - Power cables with nominal voltages up to 450/750 V (U0 / U) - Part 2-82: Power cables for general applications - Cables for fairy lights with cross-linked elastomer insulation; - German version EN 50525-282: 2011 |
DIN EN 50525-2-83 | VDE 0285-525-2-83 | 2012-01 | Cables and wires - Power cables with nominal voltages up to 450/750 V (U0 / U) - Part 2-83: Power cables for general applications - Multi-core cables with cross-linked silicone insulation; - German version EN 50525-2-83: 2011 |
DIN EN 50525-3-11 | VDE 0285-525-3-11 | 2012-01 | Cables and wires - Power cables with nominal voltages up to 450/750 V (U0 / U) - Part 3-11: Power cables with improved behavior in the event of fire - Flexible, halogen-free, low-smoke cables with thermoplastic insulation; - German version EN 50525-3-11: 2011 |
DIN EN 50525-3-21 | VDE 0285-525-3-21 | 2012-01 | Cables and wires - Power cables with nominal voltages up to 450/750 V (U0 / U) - Part 3-21: Power cables with improved behavior in the event of fire - Flexible, halogen-free, low-smoke cables with cross-linked insulation; - German version EN 50525-3-21: 2011 |
DIN EN 50525-3-31 | VDE 0285-525-3-31 | 2012-01 | Cables and wires - Power cables with nominal voltages up to 450/750 V (U0 / U) - Part 3-31: Power cables with improved behavior in the event of fire - Halogen-free, low-smoke core and wiring cables with thermoplastic insulation; - German version EN 50525-3-31: 2011 |
DIN EN 50525-3-41 | VDE 0285-525-3-41 | 2012-01 | Cables and wires - Power cables with nominal voltages up to 450/750 V (U0 / U) - Part 3-41: Power cables with improved behavior in the event of fire - Halogen-free, low-smoke core and wiring cables with cross-linked insulation; - German version EN 50525-3-41: 2011 |
DIN VDE 0289-1 | VDE 0289-1 | 1988-03 | Terms for power cables and insulated power lines - General terms |
DIN VDE 0289-2 | VDE 0289-2 | 1988-03 | Terms for power cables and insulated power lines - structural elements |
DIN VDE 0289-3 | VDE 0289-3 | 1988-03 | Terms for power cables and insulated power lines - manufacturing operations |
DIN VDE 0289-4 | VDE 0289-4 | 1988-03 | Terms for power cables and insulated power lines - testing and measuring |
DIN VDE 0289-5 | VDE 0289-5 | 1988-03 | Terms for power cables and insulated power lines - lengths |
DIN VDE 0289-6 | VDE 0289-6 | 1993-03 | Terms for power cables and insulated power lines - accessories, accessories |
DIN VDE 0289-7 | VDE 0289-7 | 1988-03 | Terms for power cables and insulated power lines - laying and assembly |
DIN VDE 0289-8 | VDE 0289-8 | 1988-03 | Terms for power cables and insulated power lines - current carrying capacity |
DIN VDE 0291-1a | VDE 0291-1a | 1973-07 | Provisions for filling compounds for cable accessories and scalding compounds - change a |
DIN VDE 0291-1 | VDE 0291-1 | 1972-02 | Provisions for filling compounds for cable accessories as well as scalding compounds - hot-pouring compounds, cold molding compounds, cold-sealing compounds and scalding compounds |
DIN VDE 0292 | VDE 0292 | 2007-05 | System for type designation of insulated cables; - German version HD 361 S3: 1999 + A1: 2006 |
DIN VDE 0293-1 | VDE 0293-1 | 2006-10 | Marking of the cores of power cables and insulated power lines with rated voltages up to 1,000 V - Part 1: Supplementary national specifications |
DIN VDE 0293-308 | VDE 0293-308 | 2003-01 | Identification of the cores of cables / lines and flexible lines with colors; -German version HD 308 S2: 2001 |
DIN EN 50334 | VDE 0293-334 | 2001-10 | Identification of the cores of cables and lines by printing; - German version EN 50334: 2001 |
DIN EN 60228 | VDE 0295 | 2005-09 | Conductors for cables and insulated wires - (IEC 60228: 2004); German version EN 60228: 2005 + Corrigendum: 2005 |
DIN VDE 0298-3 | VDE 0298-3 | 2006-06 | Use of cables and insulated lines for power systems - Part 3: Guidelines for the use of non-harmonized power lines |
DIN VDE 0298-4 | VDE 0298-4 | 2013-06 | Use of cables and insulated lines for power systems - Part 4: Recommended values for the current carrying capacity of cables and lines for permanent installation in and on buildings and of flexible lines |
DIN EN 50565-1 | VDE 0298-565-1 | 2015-02 | Cables and wires - Guidelines for the use of cables and insulated lines with a nominal voltage not exceeding 450/750 V (U0 / U) - Part 1: General guide; - German version EN 50565-1: 2014 |
DIN EN 50565-2 | VDE 0298-565-2 | 2015-02 | Cables and lines - Guidelines for the use of cables and insulated lines with a nominal voltage not exceeding 450/750 V (U0 / U) - Part 2: Construction data and conditions of use for cable and line types according to EN 50525; - German version EN 50565-2: 2014 |
DIN EN 60719 | VDE 0299-2 | 1994-02 | Calculation of the lower and upper limits of the mean external dimensions of cables with round copper conductors and rated voltages up to 450/750 V - (IEC 60719: 1992); German version EN 60719: 1993 |
Back to overview