DIN notation
|
VDE notation
|
was standing
|
Standard content
|
|
VDE-AR-N 4400 application rule
|
2011-09
|
Electricity metering (Metering Code)
|
DIN EN 60079-29-1
|
VDE 0400-1
|
2008-07
|
Explosive atmospheres - Part 29-1: Gas measuring devices - Requirements for the operating behavior of devices for measuring flammable gases - (IEC 60079-29-1: 2007, modified); German version EN 60079-29-1: 2007
|
DIN EN 60079-29-2
|
VDE 0400-2
|
2015-12
|
Explosive atmospheres - Part 29-2: Gas detection equipment - Selection, installation, use and maintenance of equipment for the measurement of flammable gases and oxygen - (IEC 60079-29-2: 2015); German version EN 60079-29-2: 2015
|
DIN EN 60079-29-3
|
VDE 0400-3
|
2015-08
|
Explosive atmospheres - Part 29-3: Gas detection devices - Guidelines for the functional safety of fixed gas warning systems - (IEC 60079-29-3: 2014); German version EN 60079-29-3: 2014
|
DIN EN 50104
|
VDE 0400-20
|
2011-04
|
Electrical devices for the detection and measurement of oxygen - Performance requirements and test methods; - German version EN 50104: 2010
|
DIN EN 50271
|
VDE 0400-21
|
2011-04
|
Electrical devices for the detection and measurement of flammable gases, toxic gases or oxygen - Requirements and tests for warning devices using software and / or digital technology; - German version EN 50271: 2010
|
DIN EN 45544-1
|
VDE 0400-22-1
|
2015-10
|
Workplace atmosphere - Electrical devices for the direct detection and direct concentration measurement of toxic gases and vapors - Part 1: General requirements and test methods; - German version EN 45544-1: 2015
|
DIN EN 45544-2
|
VDE 0400-22-2
|
2015-10
|
Workplace atmosphere - Electrical devices for the direct detection and direct concentration measurement of toxic gases and vapors - Part 2: Requirements for the operational behavior of devices which are used for exposure measurements; - German version EN 45544-2: 2015
|
DIN EN 45544-3
|
VDE 0400-22-3
|
2015-10
|
Workplace atmosphere - Electrical devices for the direct detection and direct concentration measurement of toxic gases and vapors - Part 3: Requirements for the operational behavior of devices used for general gas warning applications; - German version EN 45544-3: 2015
|
DIN EN 45544-4
|
VDE 0400-22-4
|
2000-10
|
Workplace atmosphere - Electrical devices for the direct detection and direct concentration measurement of toxic gases and vapors - Guide for selection, installation, use and maintenance; - German version EN 45544-4: 1999
|
DIN EN 50194-1
|
VDE 0400-30-1
|
2009-08
|
Electrical devices for the detection of flammable gases in residential buildings - Part 1: Test methods and requirements for operational behavior; - German version EN 50194-1: 2009
|
DIN EN 50244
|
VDE 0400-30-2
|
2000-12
|
Electrical devices for the detection of flammable gases in residential buildings - Guidelines for selection, installation, use and maintenance - German version EN 50244: 2000
|
DIN EN 50194-2
|
VDE 0400-30-3
|
2007-02
|
Electrical devices for the detection of flammable gases in residential buildings - Part 2: Fixed electrical devices for continuous operation in recreational vehicles or similar environments - Supplementary test methods and requirements for operating behavior; - German version EN 50194-2: 2006
|
DIN EN 50291-1
|
VDE 0400-34-1
|
2013-07
|
Electrical devices for the detection of carbon monoxide in residential buildings - Part 1: Test methods and requirements for operational behavior; - German version EN 50291-1: 2010 + A1: 2012
|
DIN EN 50291-2
|
VDE 0400-34-2
|
2010-11
|
Electrical devices for the detection of carbon monoxide in residential buildings - Part 2: Fixed electrical devices for continuous operation in recreational vehicles and similar environments including sport boats - Supplementary test methods and requirements for operational behavior; - German version EN 50291-2: 2010
|
DIN EN 50292
|
VDE 0400-35
|
2014-08
|
Electrical devices for the detection of carbon monoxide in houses, caravans and boats - Guidelines for selection, installation, use and maintenance; - German version EN 50292: 2013
|
DIN EN 50543
|
VDE 0400-36
|
2011-11
|
Portable and transportable electrical devices for the detection and measurement of carbon dioxide and / or carbon monoxide in indoor air - Requirements and test methods; - German version EN 50543: 2011 + AC: 2011
|
DIN EN 60079-29-4
|
VDE 0400-40
|
2011-02
|
Explosive atmospheres - Part 29-4: Gas measuring devices - Requirements for the operational behavior of devices with an open measuring section for the measurement of flammable gases - (IEC 60079-29-4: 2009, modified + Cor.:2010); German version EN 6007929-4: 2010
|
DIN EN 50379-1
|
VDE 0400-50-1
|
2013-06
|
Requirements for portable electrical equipment for measuring combustion parameters of heating systems - Part 1: General requirements and test methods; - German version EN 50379-1: 2012
|
DIN EN 50379-2
|
VDE 0400-50-2
|
2013-06
|
Requirements for portable electrical devices for the measurement of combustion parameters of heating systems - Part 2: Requirements for the performance of devices for use in legally regulated measurements and assessments; - German version EN 50379-2: 2012
|
DIN EN 50379-3
|
VDE 0400-50-3
|
2013-06
|
Requirements for portable electrical devices for measuring combustion parameters of heating systems - Part 3: Requirements for the operating behavior of devices for use in non-regulated areas for maintenance of gas-fired heating systems; - German version EN 50379-3: 2012
|
DIN CLC / TS 50612
|
VDE V 0400-50-612
|
2014-11
|
Portable electrical devices for measuring combustion parameters - Guidelines for use in the commissioning, maintenance and repair of gas-fired central heating boilers; - German version CLC / TS 50612: 2013
|
DIN EN 50402
|
VDE 0400-70
|
2009-01
|
Electrical devices for the detection and measurement of flammable or toxic gases and vapors or oxygen - Requirements for the functional safety of fixed gas warning systems; - German version EN 50402: 2005 + A1: 2008
|
DIN EN 50545-1
|
VDE 0400-80
|
2012-04
|
Electrical devices for the detection and measurement of toxic (and flammable) gases in underground garages and tunnels - Part 1: General requirements for operating behavior and test methods for the detection and measurement of carbon monoxide and nitrogen oxides; - German version EN 50545-1: 2011
|
DIN EN 61285
|
VDE 0400-100
|
2016-03
|
Process automation - Security of analysis equipment rooms - (IEC 61285: 2015); German version EN 61285: 2015
|
DIN EN 50249
|
VDE 0403-10
|
2003-03
|
Electromagnetic Locators for Underground Pipes and Cables - Performance and Safety - German Version EN 50249: 2002
|
DIN VDE 0404-1
|
VDE 0404-1
|
2002-05
|
Testing and measuring equipment for testing the electrical safety of electrical devices - General requirements
|
DIN VDE 0404-1
|
VDE 0404-1 correction 1
|
2004-02
|
Corrections to DIN VDE 0404-1 (VDE 0404 Part 1): 2002
|
DIN VDE 0404-2
|
VDE 0404-2
|
2002-05
|
Testing and measuring equipment for testing the electrical safety of electrical devices - testing equipment for tests after repairs, changes or for repeat tests
|
DIN VDE 0404-2
|
VDE 0404-2 correction 1
|
2004-02
|
Corrections to DIN VDE 0404-2 (VDE 0404 part 2): 2002
|
DIN VDE 0404-3
|
VDE 0404-3
|
2005-04
|
Testing and measuring equipment for testing the electrical safety of electrical devices - Part 3: Testing equipment for repeat tests and tests before the commissioning of medical electrical devices or systems
|
DIN VDE 0404-4
|
VDE 0404-4
|
2005-04
|
Test and measuring equipment for testing the electrical safety of electrical devices - Part 4: Hand-held and hand-operated current clamps / current probes for measurements of protective conductor currents and contact currents of electrical devices
|
DIN VDE 0405 -1
|
VDE 0405-1
|
2017-01
|
Determination of breath alcohol concentration - Part 1: Requirements for evidence-proof breath alcohol measuring devices
|
DIN VDE 0405 -2
|
VDE 0405-2
|
2005-01
|
Determination of breath alcohol concentration - Part 2: Requirements for breath alcohol measuring devices that are reliable for evidence (replaced by DIN VDE 0405-1: 2017-01)
|
DIN VDE 0405 -3
|
VDE 0405-3
|
1995-12
|
Determination of breath alcohol concentration - measuring method (replaced by DIN VDE 0405-1: 2017-01)
|
DIN VDE 0405 -4
|
VDE 0405-4
|
2005-01
|
Determination of the breath alcohol concentration - Part 4: Testing of conclusively secure breath alcohol measuring devices with test gas
|
DIN EN 50436 -1
|
VDE 0406-1
|
2014-09
|
Alcohol interlocks - Test methods and performance requirements - Part 1: Devices for drunk driving programs; - German version EN 50436-1: 2014
|
DIN EN 50436 -2
|
VDE 0406-2
|
2015-10
|
Alcohol interlocks - Test methods and performance requirements - Part 2: Devices with mouthpiece for measuring breath alcohol for general preventive use; - German version EN 50436-2: 2014 + A1: 2015
|
DIN EN 50436 -3
|
VDE 0406-3
|
2017-01
|
Alcohol interlocks - Test methods and requirements for operational behavior - Part 3: Guidelines for decision-makers, buyers and users; - German version EN 50436-3: 2017
|
DIN EN 50436 -6
|
VDE 0406-6
|
2015-10
|
Alcohol interlocks - Test methods and performance requirements - Part 6: Data security; - German version EN 50436-6: 2015
|
DIN EN 15964
|
VDE 0406-10
|
2011-05
|
Multiple use breath alcohol testers - Requirements and test methods; - German version EN 15964: 2011
|
DIN EN 60770-1
|
VDE 0408-1
|
2011-09
|
Measuring transducers for industrial process control technology - Part 1: Methods for evaluating operational behavior - (IEC 607701: 2010); German version EN 60770-1: 2011
|
DIN EN 60770-2
|
VDE 0408-2
|
2011-06
|
Measuring transducers for industrial process control technology - Part 2: Procedure for acceptance and routine testing - (IEC 60770-2: 2010); German version EN 60770-2: 2010
|
DIN EN 60770-3
|
VDE 0408-3
|
2015-06
|
Measuring transducers for industrial process control technology - Part 3: Procedure for evaluating the performance of intelligent measuring transducers - (IEC 60770-3: 2014); German version EN 60770-3: 2014
|
DIN EN 61003-1
|
VDE 0409
|
2004-08
|
Industrial process control systems - Devices with analog inputs and two- or multi-point behavior - Part 1: Procedure for evaluating the operating behavior - (IEC 61003-1: 2004); German version EN 61003-1: 2004
|
DIN EN 61003-2
|
VDE 0409-2
|
2010-05
|
Industrial process control systems - Devices with analog inputs and two- or multi-point behavior - Part 2: Guidelines for function control and series testing - (IEC 61003-2: 2009); German version EN 61003-2: 2009
|
DIN IEC / TS 62492-2
|
VDE V 0409-20-2
|
2014-04
|
Industrial process control devices - Radiation thermometers - Part 2: Determination of the technical specifications of radiation thermometers - (IEC / TS 62492-2: 2013)
|
DIN EN 1349
|
VDE 0409-1349
|
2010-01
|
Control devices for process control; - German version EN 1349: 2009
|
DIN EN 60873-1
|
VDE 0410-1
|
2004-05
|
Electric and pneumatic analog strip chart recorders for use in systems of industrial process control engineering - Part 1: Procedure for evaluating operational behavior - (IEC 60873-1: 2003); German version EN 60873-1: 2004
|
DIN EN 60873-2
|
VDE 0410-2
|
2004-07
|
Electrical and pneumatic analog strip recorders for use in systems of industrial process control technology - Part 2: Instructions for acceptance and operational testing - (IEC 60873-2: 2004); German version EN 60873-2: 2004
|
DIN EN 61010-031
|
VDE 0411-031
|
2016-07
|
Safety regulations for electrical measuring, control, regulating and laboratory devices - Part 031: Safety regulations for hand-held measuring accessories for electrical measurement and testing - (IEC 61010-031: 2015); German version EN 61010-031: 2015
|
DIN EN 61010-1
|
VDE 0411-1
|
2011-07
|
Safety regulations for electrical measuring, control, regulating and laboratory devices - Part 1: General requirements - (IEC 61010-1: 2010 + Cor.:2011); German version EN 61010-1: 2010
|
DIN IEC / TS 62850
|
VDE V 0411-1-1
|
2014-07
|
Safety regulations for electrical measuring, control, regulating and laboratory devices - General requirements for devices intended for use in educational establishments by children - (IEC / TS 62850: 2013)
|
DIN EN 61010-2-081
|
VDE 0411-2-081
|
2015-11
|
Safety regulations for electrical measuring, control, regulating and laboratory devices - Part 2-081: Particular requirements for automatic and semi-automatic laboratory devices for analysis and other purposes - (IEC 61010-2-081: 2015); German version EN 61010-2-081: 2015
|
DIN EN 61010-2-033
|
VDE 0411-2-033
|
2012-11
|
Safety regulations for electrical measuring, control, regulating and laboratory devices - Part 2-033: Particular requirements for hand-held multimeters and other hand-held measuring devices for household and professional use, suitable for measuring mains voltages - (IEC 61010-2-033: 2012 ); German version EN 61010-2-033: 2012
|
DIN EN 61010-2-091
|
VDE 0411-2-091
|
2013-01
|
Safety regulations for electrical measuring, control, regulating and laboratory equipment - Part 2-091: Particular requirements for X-ray equipment cabinets - (IEC 61010-2-091: 2012); German version EN 61010-2-091: 2012
|
DIN EN 61010-2-020
|
VDE 0411-2-020
|
2007-03
|
Safety regulations for electrical measuring, control, regulating and laboratory devices - Part 2-020: Particular requirements for laboratory centrifuges - (IEC 61010-2-020: 2006); German version EN 61010-2-020: 2006
|
DIN EN 61010-2-010
|
VDE 0411-2-010
|
2015-05
|
Safety regulations for electrical measuring, control, regulating and laboratory devices - Part 2-010: Particular requirements for laboratory devices for heating substances - (IEC 61010-2-010: 2014); German version EN 61010-2-010: 2014
|
DIN EN 61010-2-032
|
VDE 0411-2-032
|
2013-07
|
Safety regulations for electrical measuring, control, regulating and laboratory devices - Part 2-032: Particular requirements for hand-held and hand-operated current probes for electrical tests and measurements - (IEC 61010-2-032: 2012); German version EN 61010-2-032: 2012
|
DIN EN 61010-2-040
|
VDE 0411-2-040
|
2016-06
|
Safety regulations for electrical measuring, control, regulating and laboratory devices - Part 2-040: Particular requirements for sterilizers and washer-disinfectors for the treatment of medical materials - (IEC 61010-2-040: 2015); German version EN 61010-2-040: 2015
|
DIN EN 61010-2-051
|
VDE 0411-2-051
|
2016-02
|
Safety regulations for electrical measuring, control, regulating and laboratory equipment - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring - (IEC 61010-2-051: 2015); German version EN 61010-2-051: 2015
|
DIN EN 61010-2-061
|
VDE 0411-2-061
|
2016-02
|
Safety regulations for electrical measuring, control, regulating and laboratory devices - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization - (IEC 61010-2-061: 2015); German version EN 61010-2061: 2015
|
DIN EN 61010-2-030
|
VDE 0411-2-030
|
2011-07
|
Safety regulations for electrical measuring, control, regulating and laboratory devices - Part 2-030: Special regulations for test and measuring circuits - (IEC 61010-2-030: 2010 + Cor.:2011); German version EN 61010-2-030: 2010
|
DIN EN 61010-2-091
|
VDE 0411-2-091 Correction 1
|
2016-02
|
Correction to DIN EN 61010-2-091 (VDE 0411-2-091): 2013-01
|
DIN EN 61010-2-101
|
VDE 0411-2-101
|
2003-09
|
Safety regulations for electrical measuring, control, regulating and laboratory devices - Part 2-101: Particular requirements for InVitro Diagnostic (IVD) medical devices - (IEC 61010-2-101: 2002); German version EN 61010-2-101: 2002
|
DIN EN 61010-2-201
|
VDE 0411-2-201
|
2014-01
|
Safety regulations for electrical measuring, control, regulating and laboratory devices - Part 2-201: Particular requirements for control and regulating devices - (IEC 61010-2-201: 2013); German version EN 61010-2-201: 2013 + AC: 2013
|
DIN EN 61131-2
|
VDE 0411-500
|
2008-04
|
Programmable logic controllers - Part 2: Equipment requirements and tests - (IEC 61131-2: 2007); German version EN 61131-2: 2007
|
DIN EN 61131-2
|
VDE 0411-500 correction 1
|
2009-01
|
Correction to DIN EN 61131-2 (VDE 0411-500): 2008-04
|
DIN EN 61131-6
|
VDE 0411-506
|
2013-10
|
Programmable Controllers - Part 6: Functional Safety - (IEC 61131-6: 2012); German version EN 611316: 2012
|
DIN EN 61131-9
|
VDE 0411-509
|
2015-02
|
Programmable logic controllers - Part 9: Interface for communication with small sensors and actuators via a point-to-point connection - (IEC 61131-9: 2013); German version EN 61131-9: 2013
|
DIN EN 62598
|
VDE 0412-1
|
2014-03
|
Radiation measurement devices - Design requirements and classification of radiometric measurement arrangements - (IEC 62598: 2011); German version EN 62598: 2013
|
DIN IEC 62523
|
VDE 0412-10
|
2011-12
|
Radiation protection measuring devices - Radiographic inspection system for cargo / vehicles - (IEC 62523: 2010)
|
DIN IEC 62463
|
VDE 0412-11
|
2012-02
|
Radiation protection measuring devices - X-ray systems for personal control with regard to security and the carrying of forbidden objects - (IEC 62463: 2010)
|
DIN IEC 62709
|
VDE 0412-12
|
2015-06
|
Radiation protection instrumentation - Personal security control - Measurement of the image quality of X-ray systems - (IEC 62709: 2014)
|
DIN IEC 62495
|
VDE 0412-20
|
2011-12
|
Radiation measuring devices - Portable X-ray fluorescence analyzers with small X-ray tubes - (IEC 62495: 2011)
|
DIN EN ISO 2919
|
VDE 0412-2919
|
2015-03
|
Radiation protection - Sealed radioactive materials - General requirements and classification - (ISO 2919: 2012); German version EN ISO 2919: 2014
|
DIN IEC / TR 62971
|
VDE 0412-2971
|
2016-06
|
Radiation measurement technology - Radiation sources used in standards for the detection of unauthorized transport of radioactive materials - Guideline and recommendations - (IEC / TR 62971: 2015)
|
DIN EN ISO 3925
|
VDE 0412-3925
|
2015-11
|
Unsealed radioactive material - Labeling and documentation - (ISO 3925: 2014); German version EN ISO 3925: 2015
|
DIN EN 61557-1
|
VDE 0413-1
|
2007-12
|
Electrical safety in low voltage networks up to AC 1 000 V and DC 1 500 V - Devices for testing, measuring or monitoring protective measures - Part 1: General requirements - (IEC 61557-1: 2007); German version EN 615571: 2007
|
DIN EN 61557-2
|
VDE 0413-2
|
2008-02
|
Electrical safety in low voltage networks up to AC 1 000 V and DC 1 500 V - Devices for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance - (IEC 61557-2: 2007); German version EN 61557-2: 2007
|
DIN EN 61557-3
|
VDE 0413-3
|
2008-02
|
Electrical safety in low voltage networks up to AC 1 000 V and DC 1 500 V - Devices for testing, measuring or monitoring protective measures - Part 3: Loop resistance - (IEC 61557-3: 2007); German version EN 61557-3: 2007
|
DIN EN 61557-4
|
VDE 0413-4
|
2007-12
|
Electrical safety in low voltage networks up to AC 1 000 V and DC 1 500 V - Devices for testing, measuring or monitoring protective measures - Part 4: Resistance of grounding conductors, protective conductors and equipotential bonding conductors - (IEC 61557-4: 2007); German version EN 61557-4: 2007
|
DIN EN 61557-5
|
VDE 0413-5
|
2007-12
|
Electrical safety in low voltage networks up to AC 1,000 V and DC 1,500 V - Devices for testing, measuring or monitoring protective measures - Part 5: Earth resistance - (IEC 61557-5: 2007); German version EN 61557-5: 2007
|
DIN EN 61557-6
|
VDE 0413-6
|
2008-05
|
Electrical safety in low-voltage networks up to AC 1,000 V and DC 1,500 V - Devices for testing, measuring or monitoring protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems - (IEC 61557 -6: 2007); German version EN 61557-6: 2007
|
DIN EN 61557-7
|
VDE 0413-7
|
2008-02
|
Electrical safety in low voltage networks up to AC 1 000 V and DC 1 500 V - Devices for testing, measuring or monitoring protective measures - Part 7: Rotating field - (IEC 61557-7: 2007); German version EN 61557-7: 2007
|
DIN EN 61557-8
|
VDE 0413-8
|
2015-12
|
Electrical safety in low-voltage networks up to AC 1 000 V and DC 1 500 V - Devices for testing, measuring or monitoring protective measures - Part 8: Insulation monitoring devices for IT systems - (IEC 61557-8: 2014); German version EN 61557-8: 2015
|
DIN EN 61557-9
|
VDE 0413-9
|
2015-10
|
Electrical safety in low voltage networks up to AC 1 000 V and DC 1 500 V - Devices for testing, measuring or monitoring protective measures - Part 9: Equipment for insulation fault location in IT systems - (IEC 61557-9: 2014); German version EN 61557-9: 2015
|
DIN EN 61557-10
|
VDE 0413-10
|
2014-03
|
Electrical safety in low voltage networks up to AC 1 000 V and DC 1 500 V - Devices for testing, measuring or monitoring protective measures - Part 10: Combined measuring devices for testing, measuring or monitoring protective measures - (IEC 61557-10: 2013); German version EN 61557-10: 2013
|
DIN EN 61557-11
|
VDE 0413-11
|
2009-11
|
Electrical safety in low-voltage networks up to AC 1,000 V and DC 1,500 V - Devices for testing, measuring or monitoring protective measures - Part 11: Effectiveness of residual current monitoring devices (RCMs) type A and type B in TT, TN and IT Systems - (IEC 61557-11: 2009); German version EN 61557-11: 2009
|
DIN EN 61557-12
|
VDE 0413-12
|
2008-12
|
Electrical safety in low voltage networks up to AC 1 000 V and DC 1 500 V - Devices for testing, measuring or monitoring protective measures - Part 12: Combined devices for measuring and monitoring operating behavior - (IEC 61557-12: 2007); German version EN 61557-12: 2008
|
DIN EN 61557-13
|
VDE 0413-13
|
2012-04
|
Electrical safety in low-voltage networks up to AC 1,000 V and DC 1,500 V - Devices for testing, measuring or monitoring protective measures - Part 13: Hand-held and hand-operated current clamps and current probes for measuring leakage currents in electrical systems - (IEC 61557-13: 2011) ; German version EN 61557-13: 2011
|
DIN EN 61557-14
|
VDE 0413-14
|
2014-02
|
Electrical safety in low voltage networks up to AC 1 000 V and DC 1 500 V - Devices for testing, measuring or monitoring protective measures - Part 14: Devices for testing the safety of the electrical equipment of machines - (IEC 61557-14: 2013); German version EN 61557-14: 2013
|
DIN EN 61557-15
|
VDE 0413-15
|
2014-10
|
Electrical safety in low-voltage networks up to AC 1,000 V and DC 1,500 V - Devices for testing, measuring or monitoring protective measures - Part 15: Requirements for the functional safety of insulation monitoring devices in IT systems and of equipment for insulation fault location in IT systems - (IEC 61557-15: 2014); German version EN 61557-15: 2014
|
DIN EN 61557-16
|
VDE 0413-16
|
2015-12
|
Electrical safety in low-voltage networks up to AC 1,000 V and DC 1,500 V - Devices for testing, measuring or monitoring protective measures - Part 16: Devices for testing the effectiveness of protective measures of electrical devices and / or medical electrical devices - (IEC 61557-16 : 2014); German version EN 61557-16: 2015
|
DIN EN 50482
|
VDE 0414-6
|
2008-07
|
Instrument transformers - three-phase voltage transformers with Um up to 52 kV; - German version EN 50482: 2008
|
DIN EN 61869-1
|
VDE 0414-9-1
|
2010-04
|
Instrument transformers - Part 1: General requirements - (IEC 61869-1: 2007, modified); German version EN 61869-1: 2009
|
DIN EN 61869-2
|
VDE 0414-9-2
|
2013-07
|
Instrument transformers - Part 2: Additional requirements for current transformers - (IEC 61869-2: 2012); German version EN 61869-2: 2012
|
DIN EN 61869-2
|
VDE 0414-9-2 correction 1
|
2014-06
|
Correction to DIN EN 61869-2 (VDE 0414-9-2): 2013-07
|
DIN EN 61869-3
|
VDE 0414-9-3
|
2012-05
|
Instrument transformers - Part 3: Additional requirements for inductive voltage transformers - (IEC 61869-3: 2011); German version EN 61869-3: 2011
|
DIN EN 61869-4
|
VDE 0414-9-4
|
2015-04
|
Instrument transformers - Part 4: Additional requirements for combined transformers - (IEC 61869-4: 2013); German version EN 618694: 2014
|
DIN EN 61869-5
|
VDE 0414-9-5
|
2012-05
|
Instrument transformers - Part 5: Additional requirements for capacitive voltage transformers - (IEC 61869-5: 2011); German version EN 61869-5: 2011
|
DIN IEC / TR 61869-102
|
VDE 0414-9-102
|
2015-02
|
Instrument transformers - Part 102: Ferroresonance vibrations in switchgear with inductive voltage transformers - (IEC / TR 61869102: 2014)
|
DIN IEC / TR 61869-103
|
VDE 0414-9-103
|
2013-02
|
Instrument transformers - Application of instrument transformers in the measurement of voltage quality - (IEC / TR 61869-103: 2012)
|
DIN EN 60044-7
|
VDE 0414-44-7
|
2000-11
|
Instrument transformers - Electronic voltage transformers - (IEC 60044-7: 1999) German version EN 60044-7: 2000
|
DIN EN 60044-8
|
VDE 0414-44-8
|
2003-06
|
Instrument transformers - Part 8: Electronic current transformers - (IEC 60044-8: 2002); German version EN 60044-8: 2002
|
DIN EN 62586-1
|
VDE 0415-1
|
2014-12
|
Measurement of power quality in energy supply systems - Part 1: Measuring devices for power quality - (IEC 625861: 2013); German version EN 62586-1: 2014
|
DIN EN 62586-2
|
VDE 0415-2
|
2014-12
|
Measurement of voltage quality in energy supply systems - Part 2: Function tests and requirements for measurement uncertainty - (IEC 62586-2: 2013); German version EN 62586-2: 2014
|
DIN EN 50470-2
|
VDE 0418-0-2
|
2007-05
|
Alternating current electricity meters - Part 2: Special requirements - Electromechanical active consumption meters of accuracy classes A and B; - German version EN 50470-2: 2006
|
DIN CEN / CLC / ETSI / TR 50572
|
VDE 0418-0
|
2014-10
|
Functional reference architecture for communication in intelligent measuring systems; - German version CEN / CLC / ETSI / TR 50572: 2011
|
DIN EN 50470-3
|
VDE 0418-0-3
|
2007-05
|
Alternating current electricity meters - Part 3: Particular requirements - Electronic active consumption meters of accuracy classes A, B and C; - German version EN 50470-3: 2006
|
DIN EN 50470-1
|
VDE 0418-0-1
|
2007-05
|
AC electricity meters - Part 1: General requirements, tests and test conditions - Measuring systems (accuracy classes A, B and C); - German version EN 50470-1: 2006
|
DIN EN 50470-1
|
VDE 0418-0-1 correction 1
|
2008-06
|
Corrections to DIN EN 50470-1 (VDE 0418-0-1): 2007-05
|
DIN VDE 0418-2
|
VDE 0418-2
|
1966-03
|
Electricity meter - blind consumption meter
|
DIN EN 62052-11
|
VDE 0418-2-11
|
2003-11
|
AC electricity meters - General requirements, tests and test conditions - Part 11: Measuring equipment - (IEC 62052-11: 2003); German version EN 62052-11: 2003
|
DIN EN 62052-21
|
VDE 0418-2-21
|
2005-06
|
AC electricity meters - General requirements, tests and test conditions - Part 21: Devices for tariff and load control - (IEC 62052-21: 2004); German version EN 62052-21: 2004
|
DIN VDE 0418-3
|
VDE 0418-3
|
1965-06
|
Electricity meter - direct current meter
|
DIN EN 62053-11
|
VDE 0418-3-11
|
2003-11
|
AC electricity meters - Particular requirements - Part 11: Electromechanical active consumption meters of accuracy classes 0.5, 1 and 2 - (IEC 62053-11: 2003); German version EN 62053-11: 2003
|
DIN EN 62053-21
|
VDE 0418-3-21
|
2003-11
|
AC electricity meters - Specific requirements - Part 21: Active electronic energy meters of accuracy classes 1 and 2 - (IEC 62053-21: 2003); German version EN 62053-21: 2003
|
DIN EN 62053-22
|
VDE 0418-3-22
|
2003-11
|
AC electricity meters - Particular requirements - Part 22: Active electronic energy meters of accuracy classes 0.2 S and 0.5 S - (IEC 62053-22: 2003); German version EN 62053-22: 2003
|
DIN EN 62053-23
|
VDE 0418-3-23
|
2003-11
|
AC electricity meters - Specific requirements - Part 23: Electronic reactive energy meters of accuracy classes 2 and 3 - (IEC 62053-23: 2003); German version EN 62053-23: 2003
|
DIN EN 62053-24
|
VDE 0418-3-24
|
2015-07
|
AC electricity meters - Specific requirements - Part 24: Basic electronic reactive energy meters of accuracy classes 0.5 S, 1 S and 1 - (IEC 62053-24: 2014); German version EN 62053-24: 2015
|
DIN EN 62053-31
|
VDE 0418-3-31
|
1999-04
|
Equipment for measuring electrical energy (AC) - Special requirements - Pulse equipment for induction meters or electronic meters (only two-wire systems) - (IEC 62053-31: 1998); German version EN 62053-31: 1998
|
DIN EN 62053-52
|
VDE 0418-3-52
|
2006-08
|
AC electricity meters - Specific requirements - Part 52: Symbols - (IEC 62053-52: 2005); German version EN 62053-52: 2005
|
DIN EN 62053-61
|
VDE 0418-3-61
|
1999-04
|
Equipment for measuring electrical energy (AC) - Special requirements - Power consumption and voltage requirements - (IEC 62053-61: 1998); German version EN 62053-61: 1998
|
DIN VDE 0418-4
|
VDE 0418-4
|
1967-07
|
Electricity meters - maximum works
|
DIN VDE 0418-5
|
VDE 0418-5
|
1973-04
|
Electricity meters - remote counting devices
|
DIN EN 62055-31
|
VDE 0418-5-31
|
2006-07
|
Measurement of electrical energy - Meter systems with collection function - Part 31: Special requirements - Electronic collection active consumption meters (classes 1 and 2) - (IEC 62055-31: 2005); German version EN 62055-31: 2005
|
DIN EN 62055-31
|
VDE 0418-5-31 correction 1
|
2008-01
|
Corrections to DIN EN 62055-31 (VDE 0418-5-31): 2006-07
|
DIN EN 62056-1-0
|
VDE 0418-6-1-0
|
2015-12
|
Data communication in electrical energy measurement - DLMS / COSEM - Part 1-0: Standardization framework for intelligent measurement - (IEC 62056-1-0: 2014); German version EN 62056-1-0: 2015
|
DIN EN 62056-3-1
|
VDE 0418-6-3-1
|
2014-12
|
Data communication for electrical energy measurement - DLMS / COSEM - Part 3-1: Use of local networks with carrier frequency signal transmission on twisted pair cables - (IEC 62056-3-1: 2013); German version EN 62056-31: 2014
|
DIN EN 62058-11
|
VDE 0418-8-11
|
2011-04
|
AC electricity meters - Acceptance test - Part 11: General acceptance test procedures - (IEC 62058-11: 2008, modified); German version EN 62058-11: 2010
|
DIN EN 62058-21
|
VDE 0418-8-21
|
2011-04
|
AC electricity meters - Acceptance test - Part 21: Particular requirements for electromechanical meters for active energy (classes 0.5, 1 and 2 and accuracy classes A and B) - (IEC 62058-21: 2008, modified); German version EN 62058-21: 2010
|
DIN EN 62058-31
|
VDE 0418-8-31
|
2011-04
|
AC electricity meters - Acceptance test - Part 31: Particular requirements for electronic meters for active energy (classes 0.2 S, 0.5 S, 1 and 2 and accuracy classes A, B and C) - (IEC 62058-31: 2008, modified) ; German version EN 62058-31: 2010
|
DIN EN 62059-31-1
|
VDE 0418-9-31-1
|
2009-07
|
Electricity meters - Reliability - Part 31-1: Time-lapse reliability test - Elevated temperature and humidity - (IEC 62059-31-1: 2008); German version EN 62059-31-1: 2008
|
DIN EN 62059-32-1
|
VDE 0418-9-32-1
|
2012-10
|
Electricity meters - Reliability - Part 32-1: Durability - Test of stability of metrological properties under application of elevated temperature - (IEC 62059-32-1: 2011); German version EN 62059-32-1: 2012
|
DIN EN 62059-41
|
VDE 0418-9-41
|
2007-01
|
Electricity meters - Reliability - Part 41: Reliability prediction - (IEC 62059-41: 2006); German version EN 6205941: 2006
|
DIN EN 62054-21
|
VDE 0419-4-21
|
2005-06
|
AC electricity meters - Tariff and load control - Part 21: Particular requirements for time switches - (IEC 6205421: 2004); German version EN 62054-21: 2004
|
DIN EN 62054-11
|
VDE 0420-4-11
|
2005-06
|
AC electricity meters - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers - (IEC 62054-11: 2004); German version EN 62054-11: 2004
|
DIN EN 60060-1
|
VDE 0432-1
|
2011-10
|
High voltage test technology - Part 1: General terms and test conditions - (IEC 60060-1: 2010); German version EN 60060-1: 2010
|
DIN EN 60060-2
|
VDE 0432-2
|
2011-10
|
High voltage test technology - Part 2: Measurement systems - (IEC 60060-2: 2010); German version EN 60060-2: 2011
|
DIN EN 60060-3
|
VDE 0432-3
|
2006-08
|
High-voltage testing technology - Part 3: Terms and requirements for on-site tests - (IEC 60060-3: 2006); German version EN 60060-3: 2006
|
DIN EN 61083-1
|
VDE 0432-7
|
2002-01
|
Measuring devices and software for impulse voltage and current testing - Requirements for measuring devices - (IEC 61083-1: 2001); German version EN 61083-1: 2001
|
DIN EN 61083-2
|
VDE 0432-8
|
2013-12
|
Measuring devices and software for measurements in high voltage and high current tests - Part 2: Requirements for the software in tests with surge voltages and currents - (IEC 61083-2: 2013); German version EN 61083-2: 2013
|
DIN EN 60052
|
VDE 0432-9
|
2003-06
|
Voltage measurements with standard air gap - (IEC 60052: 2002); German version EN 60052: 2002
|
DIN EN 61180-1
|
VDE 0432-10
|
1995-05
|
High-voltage test technology for low-voltage devices - Terms, testing and test conditions - (IEC 61180-1: 1992); German version EN 61180-1: 1994
|
DIN EN 61180-2
|
VDE 0432-11
|
1995-05
|
High-voltage test technology for low-voltage equipment - Test equipment - (IEC 61180-2: 1994); German version EN 61180-2: 1994
|
DIN EN 62475
|
VDE 0432-20
|
2011-09
|
High current test technology - Terms and requirements for high current measurements - (IEC 62475: 2010); German version EN 62475: 2010
|
DIN EN 60270
|
VDE 0434
|
2001-08
|
High-voltage test technology - Partial discharge measurements - (IEC 60270: 2000); German version EN 60270: 2001
|
DIN EN 60270
|
VDE 0434 correction 1
|
2002-11
|
Corrections to DIN EN 60270 (VDE 0434): 2001-08
|
DIN EN 61810-2
|
VDE 0435-120
|
2012-01
|
Electromechanical elementary relays - Part 2: Functionality (reliability) - (IEC 61810-2: 2011); German version EN 61810-2: 2011
|
DIN EN 61810-2-1
|
VDE 0435-120-1
|
2012-01
|
Electromechanical elementary relays - Part 2-1: Functionality (reliability) - Procedure for verifying the B10 values - (IEC 61810-2-1: 2011); German version EN 61810-2-1: 2011
|
DIN EN 61810-1
|
VDE 0435-201
|
2015-10
|
Electromechanical elementary relays - Part 1: General and safety requirements - (IEC 61810-1: 2015); German version EN 61810-1: 2015
|
DIN EN 61810-1
|
VDE 0435-201 correction 1
|
2016-05
|
Correction to DIN EN 61810-1 (VDE 0435-201): 2015-10
|
DIN EN 62314
|
VDE 0435-202
|
2007-04
|
Solid State Relays - (IEC 62314: 2006); German version EN 62314: 2006
|
DIN EN 62246-1
|
VDE 0435-205
|
2015-11
|
Reed switches - Part 1: Generic specification - (IEC 62246-1: 2015); German version EN 62246-1: 2015
|
DIN EN 61811-1
|
VDE 0435-210
|
2015-10
|
Electromechanical telecommunications elementary relays of assessed quality - Part 1: Generic and detail specification - (IEC 61811-1: 2015); German version EN 61811-1: 2015
|
DIN EN 60255-1
|
VDE 0435-300
|
2010-09
|
Measuring relays and protection devices - Part 1: General requirements - (IEC 60255-1: 2009); German version EN 602551: 2010
|
DIN EN 60255-26
|
VDE 0435-320
|
2014-03
|
Measuring relays and protective devices - Part 26: Requirements for electromagnetic compatibility - (IEC 60255-26: 2013); German version EN 60255-26: 2013 + AC: 2013
|
DIN EN 60255-26
|
VDE 0435-320 correction 1
|
2014-12
|
Correction to DIN EN 60255-26 (VDE 0435-320): 2014-03
|
DIN EN 60255-26
|
VDE 0435-320 correction 2
|
2015-06
|
Correction to DIN EN 60255-26 (VDE 0435-320): 2014-03
|
DIN EN 60255-27
|
VDE 0435-327
|
2014-11
|
Measuring relays and protective devices - Part 27: Product safety requirements - (IEC 60255-27: 2013); German version EN 60255-27: 2014
|
DIN EN 50438
|
VDE 0435-901
|
2014-06
|
Requirements for the connection of small generators to the public low-voltage network; - German version EN 50438: 2013
|
DIN EN 61812-1
|
VDE 0435-2021
|
2012-03
|
Timing relays (relays with fixed time behavior) for industrial and household use - Part 1: Requirements and tests - (IEC 61812-1: 2011); German version EN 61812-1: 2011
|
DIN EN 61812-1
|
VDE 0435-2021 correction 1
|
2015-04
|
Correction to DIN EN 61812-1 (VDE 0435-2021): 2012-03
|
DIN EN 61810-3
|
VDE 0435-2022
|
2016-01
|
Electromechanical elementary relays - Part 3: Relays with (mechanically) forcibly guided contacts - (IEC 61810-3: 2015); German version EN 61810-3: 2015
|
DIN EN 60255-24
|
VDE 0435-3040
|
2002-04
|
Electrical relays - Standard format for the exchange of transient data from electrical power supply networks (COMTRADE) - (IEC 60255-24: 2001); German version EN 60255-24: 2001
|
DIN EN 60255-121
|
VDE 0435-3121
|
2015-01
|
Measuring relays and protection devices - Part 121: Functional requirements for distance protection - (IEC 60255-121: 2014); German version EN 60255-121: 2014
|
DIN EN 60255-127
|
VDE 0435-3127
|
2014-09
|
Measuring relays and protection devices - Part 127: Functional standard for over / under voltage protection - (IEC 60255-127: 2010); German version EN 60255-127: 2014
|
DIN EN 60255-149
|
VDE 0435-3149
|
2014-06
|
Measuring relays and protection devices - Part 149: Functional requirements for thermal overload protection - (IEC 60255149: 2013); German version EN 60255-149: 2013
|
DIN EN 60255-151
|
VDE 0435-3151
|
2010-05
|
Measuring relays and protection devices - Part 151: Functional requirements for over / under current protection - (IEC 60255-151: 2009); German version EN 60255-151: 2009
|
DIN VDE 0441-1
|
VDE 0441-1
|
1985-07
|
Testing of plastic insulators for operating alternating voltages above 1 kV - testing of materials for outdoor insulators
|
DIN IEC 60660
|
VDE 0441-3
|
2000-12
|
Insulators - Tests on indoor post insulators made of organic materials for networks with nominal voltages above 1000 V to less than 300 kV - (IEC 60660: 1999) German version EN 60660: 1999
|
DIN EN 61466-1
|
VDE 0441-4
|
1997-10
|
Composite chain insulators for overhead lines with a nominal voltage above 1 kV - Part 1: Standardized strength classes and end fittings - (IEC 61466-1: 1997); German version EN 61466-1: 1997
|
DIN EN 61466-1
|
VDE 0441-4 Correction 1
|
2010-02
|
Correction to DIN EN 61466-1 (VDE 0441-4): 1997-10; (IEC-Cor.:2007 to IEC 61466-1: 1997)
|
DIN EN 61466-2
|
VDE 0441-5
|
2002-12
|
Composite chain insulators for overhead lines with a nominal voltage above 1000 V - Dimensions and electrical parameters - (IEC 61466-2: 1998 + A1: 2002); German version EN 61466-2: 1998 + A1: 2002
|
DIN EN 61109
|
VDE 0441-100
|
2009-06
|
Insulators for overhead lines - Composite suspension and tensioning insulators for AC systems with a nominal voltage of more than 1 000 V - Terms, test methods and acceptance criteria - (IEC 61109: 2008); German version EN 61109: 2008
|
DIN EN 61462
|
VDE 0441-102
|
2008-06
|
Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltages above 1,000 V - Terms, test methods, acceptance criteria and design recommendations - (IEC 61462: 2007); German version EN 61462: 2007
|
DIN EN 61952
|
VDE 0441-200
|
2009-06
|
Insulators for overhead lines - Composite overhead line supports for AC systems with a nominal voltage above 1 000 V - Terms, test methods and acceptance criteria - (IEC 61952: 2008); German version EN 61952: 2008
|
DIN EN 62217
|
VDE 0441-1000
|
2013-07
|
High voltage polymer insulators for indoor and outdoor use - General terms, test methods and acceptance criteria - (IEC 62217: 2012); German version EN 62217: 2013
|
DIN EN 60383-1
|
VDE 0446-1
|
1997-05
|
Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic or glass insulators for AC voltage systems - Terms, test methods and acceptance criteria - (IEC 60383-1: 1993); German version EN 60383-1: 1996
|
DIN EN 60383-1
|
VDE 0446-1 correction 1
|
2001-08
|
Corrections to edition 1997-05
|
DIN VDE 0446-2
|
VDE 0446-2
|
1971-03
|
Regulations for insulators for overhead lines, contact lines and telecommunication lines - Regulations for insulators for overhead power lines and contact lines up to 1000 V as well as for overhead telecommunication lines
|
DIN VDE 0446-3
|
VDE 0446-3
|
1973-05
|
Regulations for insulators for overhead lines, contact lines and telecommunication lines - Regulations for fittings firmly connected to the insulator
|
DIN EN 60383-2
|
VDE 0446-4
|
1995-08
|
Insulators for overhead lines with a nominal voltage of more than 1000 V - Insulator strings and insulator chains for AC voltage systems - Terms, test methods and acceptance criteria - (IEC 60383-2: 1993); German version EN 603832: 1995
|
DIN EN 61325
|
VDE 0446-5
|
1996-04
|
Insulators for overhead lines with a nominal voltage of more than 1000 V - Ceramic or glass insulators for direct voltage systems - Terms, test methods and acceptance criteria - (IEC 61325: 1995); German version EN 61325: 1995
|
DIN EN 60305
|
VDE 0446-6
|
1996-10
|
Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulators for AC systems - Characteristics of cap insulators - (IEC 60305: 1995); German version EN 60305: 1996
|
DIN EN 60433
|
VDE 0446-7
|
1999-04
|
Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic insulators for AC voltage systems - Characteristics of chain insulators in long rod design - (IEC 60433: 1998); German version EN 60433: 1998
|
DIN EN 61211
|
VDE 0446-102
|
2005-11
|
Insulators made of ceramic material or glass for overhead lines with a nominal voltage of more than 1 kV - Impulse voltage breakdown tests in an air atmosphere - (IEC 61211: 2004); German version EN 61211: 2005
|
DIN EN 61467
|
VDE 0446-104
|
2009-08
|
Insulators for overhead lines - Insulator strands and chains for lines with a nominal voltage greater than 1 000 V - Alternating current high-performance arc tests - (IEC 61467: 2008); German version EN 61467: 2008
|
DIN EN 60507
|
VDE 0448-1
|
2014-09
|
Impurity tests on high-voltage ceramic and glass insulators for use in AC voltage systems - (IEC 60507: 2013); German version EN 60507: 2014
|
DIN EN 60068-1
|
VDE 0468-1
|
2015-09
|
Environmental influences - Part 1: General and guidance - (IEC 60068-1: 2013); German version EN 60068-1: 2014
|
DIN EN 60068-2-1
|
VDE 0468-2-1
|
2008-01
|
Environmental influences - Part 2-1: Test methods - Test A: Cold - (IEC 60068-2-1: 2007); German version EN 60068-2-1: 2007
|
DIN EN 60068-2-2
|
VDE 0468-2-2
|
2008-05
|
Environmental influences - Part 2-2: Test methods - Test B: Dry heat - (IEC 60068-2-2: 2007); German version EN 60068-2-2: 2007
|
DIN EN 60068-2-5
|
VDE 0468-2-5
|
2011-10
|
Environmental influences - Part 2-5: Test methods - Test Sa: Simulated solar irradiation near the ground and guidelines for solar irradiation - (IEC 60068-2-5: 2010 + corrigendum Dec. 2010); German version EN 60068-2-5: 2011
|
DIN EN 60068-2-6
|
VDE 0468-2-6
|
2008-10
|
Environmental influences - Part 2-6: Test methods - Test Fc: Vibration (sinusoidal) - (IEC 60068-2-6: 2007); German version EN 60068-2-6: 2008
|
DIN EN 60068-2-14
|
VDE 0468-2-14
|
2010-04
|
Environmental influences - Part 2-14: Test methods - Test N: Temperature changes - (IEC 60068-2-14: 2009); German version EN 60068-2-14: 2009
|
DIN EN 60068-2-27
|
VDE 0468-2-27
|
2010-02
|
Environmental influences - Part 2-27: Test methods - Test Ea and guidance: Shock - (IEC 60068-2-27: 2008); German version EN 60068-2-27: 2009
|
DIN EN 60068-2-31
|
VDE 0468-2-31
|
2009-04
|
Environmental influences - Part 2-31: Test methods - Test Ec: Shocks from rough handling, primarily for equipment - (IEC 60068-2-31: 2008); German version EN 60068-2-31: 2008
|
DIN EN 60068-2-38
|
VDE 0468-2-38
|
2010-06
|
Environmental influences - Part 2-38: Test methods - Test Z / AD: Combined test, temperature / humidity, cyclic - (IEC 60068-2-38: 2009); German version EN 60068-2-38: 2009
|
DIN EN 60068-2-53
|
VDE 0468-2-53
|
2011-02
|
Environmental influences - Part 2-53: Test methods - Tests and guidelines - Combined climatic (temperature / humidity) and dynamic (vibration / shock) tests - (IEC 60068-2-53: 2010); German version EN 60068-2-53: 2010
|
DIN EN 60068-2-55
|
VDE 0468-2-55
|
2014-10
|
Environmental influences - Part 2-55: Test methods - Test Ee and guidelines: Testing of loose packages including bouncing - (IEC 60068-2-55: 2013); German version EN 60068-2-55: 2013
|
DIN EN 60068-2-57
|
VDE 0468-2-57
|
2015-10
|
Environmental influences - Part 2-57: Tests - Test Ff: Vibration - Time history method and sine pulses - (IEC 60068-257: 2013); German version EN 60068-2-57: 2013
|
DIN EN 60068-2-58
|
VDE 0468-2-58
|
2016-01
|
Environmental tests - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and resistance to soldering heat for surface mount components (SMD) - (IEC 60068-2-58: 2015); German version EN 60068-2-58: 2015
|
DIN EN 60068-2-60
|
VDE 0468-2-60
|
2016-06
|
Environmental influences - Part 2-60: Tests - Test Ke: Corrosion test with flowing mixed gas - (IEC 60068-2-60: 2015); German version EN 60068-2-60: 2015
|
DIN EN 60068-2-64
|
VDE 0468-2-64
|
2009-04
|
Environmental influences - Part 2-64: Test methods - Test Fh: Vibration, broadband noise (digitally controlled) and guidelines - (IEC 60068-2-64: 2008); German version EN 60068-2-64: 2008
|
DIN EN 60068-2-65
|
VDE 0468-2-65
|
2015-08
|
Environmental influences - Part 2-65: Test methods - Test Fg: Vibration - Acoustically excited - (IEC 60068-2-65: 2013); German version EN 60068-2-65: 2013
|
DIN EN 60068-2-75
|
VDE 0468-2-75
|
2015-08
|
Environmental influences - Part 2-75: Tests - Test Eh: Hammer tests - (IEC 60068-2-75: 2014); German version EN 60068-2-75: 2014
|
DIN EN 60068-2-78
|
VDE 0468-2-78
|
2014-02
|
Environmental influences - Part 2-78: Test methods - Cab test: Damp heat, constant - (IEC 60068-2-78: 2012); German version EN 60068-2-78: 2013
|
DIN EN 60068-3-1
|
VDE 0468-3-1
|
2012-04
|
Environmental influences - Part 3-1: Supporting documentation and guidelines - Test methods cold and dry heat - (IEC 60068-3-1: 2011); German version EN 60068-3-1: 2011
|
DIN EN 60068-3-11
|
VDE 0468-3-11
|
2008-03
|
Environmental influences - Part 3-11: Supporting documentation and guidelines - Calculation of the measurement uncertainty of environmental conditions in climatic test chambers - (IEC 60068-3-11: 2007); German version EN 60068-3-11: 2007
|
DIN EN 60721-2-1
|
VDE 0468-721-2-1
|
2015-10
|
Classification of environmental conditions - Part 2-1: Natural environmental conditions - Temperature and humidity - (IEC 60721-2-1: 2013); German version EN 60721-2-1: 2014
|
DIN EN 60721-2-2
|
VDE 0468-721-2-2
|
2016-04
|
Classification of environmental conditions - Part 2-2: Natural environmental conditions - Precipitation and wind - (IEC 60721-2-2: 2012); German version EN 60721-2-2: 2013
|
DIN EN 60721-2-3
|
VDE 0468-721-2-3
|
2015-10
|
Classification of environmental conditions - Part 2-3: Natural environmental conditions - Atmospheric pressure - (IEC 60721-2-3: 2013); German version EN 60721-2-3: 2014
|
DIN EN 60721-2-9
|
VDE 0468-721-2-9
|
2015-09
|
Classification of environmental conditions - Part 2-9: Natural influences - Description of environmental conditions from measured shock and vibration data - Storage, transport and use - (IEC 60721-2-9: 2014); German version EN 60721-2-9: 2014
|
DIN EN 60529
|
VDE 0470-1
|
2014-09
|
Degrees of protection provided by the housing (IP code) - (IEC 60529: 1989 + A1: 1999 + A2: 2013); German version EN 60529: 1991 + A1: 2000 + A2: 2013
|
DIN EN 61032
|
VDE 0470-2
|
1998-10
|
Protection of people and equipment by means of enclosures - Test probes for verification - (IEC 61032: 1997); German version EN 61032: 1998
|
DIN EN 50102
|
VDE 0470-100
|
1997-09
|
Degrees of protection provided by enclosures for electrical equipment (equipment) against external mechanical loads (IK code) - German version EN 50102: 1995
|
DIN EN 50102 / A1
|
VDE 0470-100 / A1
|
1999-06
|
Degrees of protection provided by enclosures for electrical equipment (equipment) against external mechanical loads (IK code) - German version EN 50102: 1995 / A1: 1998
|
DIN EN 60695-1-10
|
VDE 0471-1-10
|
2010-12
|
Tests for assessing the risk of fire - Part 1-10: Guidance for assessing the risk of fire of electrotechnical products - General guidance - (IEC 60695-1-10: 2009); German version EN 60695-1-10: 2010
|
DIN EN 60695-1-11
|
VDE 0471-1-11
|
2016-05
|
Tests for assessing the risk of fire - Part 1-11: Instructions for assessing the risk of fire of electrotechnical products - Assessment of the risk of fire - (IEC 60695-1-11: 2014); German version EN 60695-1-11: 2015
|
DIN EN 60695-1-30
|
VDE 0471-1-30
|
2009-06
|
Tests for assessing the risk of fire - Part 1-30: Instructions for assessing the risk of fire of electrotechnical products - Application of pre-selection procedures - General guidelines - (IEC 60695-1-30: 2008); German version EN 60695-1-30: 2008
|
DIN EN 60695-1-40
|
VDE 0471-1-40
|
2014-10
|
Tests for assessing the risk of fire - Part 1-40: Instructions for assessing the risk of fire of electrotechnical products - Insulating fluid - (IEC 60695-1-40: 2013); German version EN 60695-1-40: 2014
|
DIN EN 60695-2-10
|
VDE 0471-2-10
|
2014-04
|
Fire hazard assessment tests - Part 2-10: Glow wire test method - Glow wire test equipment and general test method - (IEC 60695-2-10: 2013); German version EN 60695-2-10: 2013
|
DIN EN 60695-2-11
|
VDE 0471-2-11
|
2014-11
|
Tests to assess the risk of fire - Part 2-11: Test method with the glow wire - Test with the glow wire for the flammability of finished products (GWEPT) - (IEC 60695-2-11: 2014); German version EN 60695-2-11: 2014
|
DIN EN 60695-2-12
|
VDE 0471-2-12
|
2015-01
|
Tests to assess the risk of fire - Part 2-12: Test method with the glow wire - Test with the glow wire for flammability (GWFI) of materials - (IEC 60695-2-12: 2010 + A1: 2014); German version EN 60695-2-12: 2010 + A1: 2014
|
DIN EN 60695-2-13
|
VDE 0471-2-13
|
2015-01
|
Tests to assess the risk of fire - Part 2-13: Test method with the glow wire - Test with the glow wire for the flammability (GWIT) of materials - (IEC 60695-2-13: 2010 + Cor.:2012 + A1: 2014); German version EN 60695-213: 2010 + A1: 2014
|
DIN EN 60695-4
|
VDE 0471-4
|
2013-05
|
Tests for assessing the risk of fire - Part 4: Terminology of fire testing of electrotechnical products - (IEC 606954: 2012); German version EN 60695-4: 2012
|
DIN EN 60695-5-1
|
VDE 0471-5-1
|
2003-09
|
Tests to assess fire risk - Part 5-1: Corrosion damage from smoke and / or combustion gases - General guide - (IEC 60695-5-1: 2002); German version EN 60695-5-1: 2003
|
DIN EN 60695-6-1
|
VDE 0471-6-1
|
2011-09
|
Fire hazard assessment tests - Part 6-1: Visibility impairment due to smoke - General guidance - (IEC 60695-61: 2005 + A1: 2010); German version EN 60695-6-1: 2005 + A1: 2010
|
DIN EN 60695-6-2
|
VDE 0471-6-2
|
2014-05
|
Tests to assess fire hazard - Part 6-2: Visibility reduction due to smoke - Summary and applicability of test methods - (IEC 60695-6-2: 2011); German version EN 60695-6-2: 2011
|
DIN EN 60695-7-1
|
VDE 0471-7-1
|
2011-06
|
Tests to assess the risk of fire - Part 7-1: Toxicity of smoke and / or combustion gases - General guide - (IEC 60695-7-1: 2010); German version EN 60695-7-1: 2010
|
DIN EN 60695-7-2
|
VDE 0471-7-2
|
2013-05
|
Tests to assess the risk of fire - Part 7-2: Toxicity of smoke and / or combustion gases - Evaluation and usefulness of test methods - (IEC 60695-7-2: 2011); German version EN 60695-7-2: 2011
|
DIN EN 60695-7-3
|
VDE 0471-7-3
|
2013-05
|
Tests to assess the risk of fire - Part 7-3: Toxicity of smoke and / or combustion gases - Application and assessment of test results - (IEC 60695-7-3: 2011); German version EN 60695-7-3: 2011
|
DIN EN 60695-8-1
|
VDE 0471-8-1
|
2008-12
|
Fire hazard assessment tests - Part 8-1: Heat release - General guidance - (IEC 60695-8-1: 2008); German version EN 60695-8-1: 2008
|
DIN EN 60695-9-1
|
VDE 0471-9-1
|
2014-06
|
Fire hazard assessment tests - Part 9-1: Flame spread on surfaces - General guidance - (IEC 606959-1: 2013); German version EN 60695-9-1: 2013
|
DIN EN 60695-9-2
|
VDE 0471-9-2
|
2014-12
|
Tests for assessing fire hazard - Part 9-2: Flame spread on surfaces - Summary and applicability of test methods - (IEC 60695-9-2: 2014); German version EN 60695-9-2: 2014
|
DIN EN 60695-10-2
|
VDE 0471-10-2
|
2016-01
|
Fire Hazard Assessment Tests - Part 10-2: Abnormal Heat - Ball Pressure Test - (IEC 60695-10-2: 2014); German version EN 60695-10-2: 2014
|
DIN EN 60695-10-3
|
VDE 0471-10-3
|
2003-05
|
Tests to assess the risk of fire - Unusual heat - Test for deformation due to the reduction of mold stresses - (IEC 60695-10-3: 2002); German version EN 60695-10-3: 2002
|
DIN EN 60695-11-2
|
VDE 0471-11-2
|
2014-10
|
Tests for assessing the risk of fire - Part 11-2: Test flames - 1 kW flame with gas-air mixture: test equipment and guidelines - (IEC 60695-11-2: 2013); German version EN 60695-11-2: 2014
|
DIN EN 60695-11-3
|
VDE 0471-11-3
|
2014-10
|
Tests to assess fire hazard - Part 11-3: Test flames - 500 W test flame - Test equipment and test methods for confirmation - (IEC 60695-11-3: 2012); German version EN 60695-11-3: 2012
|
DIN EN 60695-11-4
|
VDE 0471-11-4
|
2013-05
|
Tests for assessing fire hazard - Part 11-4: Test flames - 50 W test flame - Test equipment and test methods for confirmation - (IEC 60695-11-4: 2011); German version EN 60695-11-4: 2011
|
DIN EN 60695-11-5
|
VDE 0471-11-5
|
2005-11
|
Tests to assess the risk of fire - Part 11-5: Test flames - Test method with a needle flame - Test setup, provisions for confirmatory testing and guidelines - (IEC 60695-11-5: 2004); German version EN 60695-11-5: 2005
|
DIN EN 60695-11-10
|
VDE 0471-11-10
|
2014-10
|
Tests to assess the risk of fire - Part 11-10: Test flames - Test method with a 50 W test flame, horizontal and vertical - (IEC 60695-11-10: 2013); German version EN 60695-11-10: 2013
|
DIN EN 60695-11-10
|
VDE 0471-11-10 Correction 1
|
2015-10
|
Correction to DIN EN 60695-11-10 (VDE 0471-11-10): 2014-10; (IEC-Cor.:2014 to IEC 60695-11-10: 2013)
|
DIN IEC / TS 60695-11-11
|
VDE V 0471-11-11
|
2016-07
|
Tests to assess the risk of fire - Part 11-11: Test flames - Determination of the characteristic heat flux density for ignition by an ignition source without direct contact - (IEC / TS 60695-11-11: 2016)
|
DIN EN 60695-11-20
|
VDE 0471-11-20
|
2016-04
|
Tests for assessing the risk of fire - Part 11-20: Test flames - Test method with a 500 W test flame - (IEC 6069511-20: 2015 + COR1: 2016); German version EN 60695-11-20: 2015 + AC: 2016
|
DIN VDE 0472
|
VDE 0472 supplement 1
|
2005-02
|
Testing of cables and insulated lines - Directory of the standards of the DIN VDE 0472 (VDE 0472) series
|
DIN VDE 0472-1
|
VDE 0472-1
|
1987-06
|
Testing of cables and insulated lines - general
|
DIN 57472-401
|
VDE 0472-401
|
1984-06
|
Testing of cables and insulated lines - external dimensions
|
DIN 57472-402
|
VDE 0472-402
|
1984-05
|
Testing of cables and insulated lines - wall thickness and thickness of reinforcing wires and tapes
|
DIN 57472-505
|
VDE 0472-505
|
1983-04
|
Testing of cables and insulated lines - dissipation factor, dielectric loss figure and discharge
|
DIN 57472-506
|
VDE 0472-506
|
1983-04
|
Testing of cables and insulated lines - couplings
|
DIN 57472-507
|
VDE 0472-507
|
1983-04
|
Testing of cables and insulated lines - reduction factor
|
DIN VDE 0472-509
|
VDE 0472-509
|
1986-10
|
Testing of cables and insulated lines - Dielectric strength of cables, lines and cords for telecommunications and information processing systems
|
DIN VDE 0472-512
|
VDE 0472-512
|
1985-05
|
Testing of cables and insulated lines - resistance between protective conductor and conductive layer
|
DIN VDE 0472-603
|
VDE 0472-603
|
1989-07
|
Testing of cables and insulated lines - bending behavior
|
DIN VDE 0472-604
|
VDE 0472-604
|
1985-05
|
Testing of cables and insulated lines - tightness of cable sheaths
|
DIN VDE 0472-605
|
VDE 0472-605
|
1985-01
|
Testing of cables and insulated lines - abrasion
|
DIN VDE 0472-613
|
VDE 0472-613
|
1985-11
|
Testing of cables and insulated lines - tear resistance
|
DIN 57472-619
|
VDE 0472-619
|
1983-01
|
Testing of cables and insulated lines - notch force
|
DIN 57472-621
|
VDE 0472-621
|
1983-01
|
Testing of cables and insulated lines - crystallite melting point
|
DIN 57472-623
|
VDE 0472-623
|
1983-01
|
Testing of cables and insulated lines - elongation at break of the copper conductor
|
DIN 57472-625
|
VDE 0472-625
|
1983-01
|
Testing of cables and insulated lines - tensile and elongation behavior of strain relief elements
|
DIN 57472-626
|
VDE 0472-626
|
1983-01
|
Testing of cables and insulated lines - tear length
|
DIN VDE 0472-705
|
VDE 0472-705
|
1987-01
|
Testing of cables and insulated lines - indirect soot determination for PVC sheaths
|
DIN VDE 0472-801
|
VDE 0472-801
|
1986-03
|
Testing of cables and insulated lines - galvanizing quality
|
DIN VDE 0472-805
|
VDE 0472-805
|
1994-01
|
Testing of cables and insulated lines - ozone resistance
|
DIN 57472-808
|
VDE 0472-808
|
1984-02
|
Testing of cables and insulated lines - tinability, solderability and soldering shrinkage
|
DIN 57472-812
|
VDE 0472-812
|
1984-02
|
Testing of cables and insulated lines - metallic coatings are free of pores
|
DIN VDE 0472-814
|
VDE 0472-814
|
1991-01
|
Testing of cables and insulated lines - preservation of insulation when exposed to flames
|
DIN VDE 0472-815
|
VDE 0472-815
|
1989-03
|
Testing of cables and insulated lines - halogen-free
|
DIN EN 60229
|
VDE 0473-229
|
2009-04
|
Power cables - Tests on extruded outer sheaths with special protective function - (IEC 60229: 2007); German version EN 60229: 2008
|
DIN EN 50396
|
VDE 0473-396
|
2006-07
|
Non-electrical test methods for low voltage cables and lines; - German version EN 50396: 2005
|
DIN EN 50396 / A1
|
VDE 0473-396 / A1
|
2012-03
|
Non-electrical test methods for low voltage cables and lines; - German version EN 50396: 2005 / A1: 2011
|
DIN EN 50414
|
VDE 0473-414
|
2007-03
|
Test method for the analysis of lead in PVC taken from the insulation and sheath of cables, insulated lines and optical fiber cables - Method A: Determination of the total lead content using flame atomic absorption spectrometry - Method B: Qualitative analysis of the lead content due to lead sulfide discoloration; - German version EN 50414: 2006
|
DIN EN 50497
|
VDE 0473-497
|
2008-11
|
Recommended test method for assessing the risk of plasticizer exudation in PVC-insulated and sheathed cables and wires; - German version EN 50497: 2007
|
DIN EN 60811-100
|
VDE 0473-811-100
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 100: General - (IEC 60811100: 2012); German version EN 60811-100: 2012
|
DIN EN 60811-201
|
VDE 0473-811-201
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of wall thickness of insulating sleeves - (IEC 60811-201: 2012); German version EN 60811-201: 2012
|
DIN EN 60811-202
|
VDE 0473-811-202
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of wall thickness of non-metallic sheaths - (IEC 60811-202: 2012); German version EN 60811-202: 2012
|
DIN EN 60811-203
|
VDE 0473-811-203
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of external dimensions - (IEC 60811-203: 2012); German version EN 60811-203: 2012
|
DIN EN 60811-301
|
VDE 0473-811-301
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of dielectric constants of fillers at 23 ° C - (IEC 60811-301: 2012); German version EN 60811-301: 2012
|
DIN EN 60811-302
|
VDE 0473-811-302
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of DC resistance of fillers at 23 ° C and at 100 ° C - (IEC 60811-302: 2012); German version EN 60811-302: 2012
|
DIN EN 60811-401
|
VDE 0473-811-401
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 401: Other tests - Thermal aging methods - Aging in an oven - (IEC 60811-401: 2012); German version EN 60811-401: 2012
|
DIN EN 60811-402
|
VDE 0473-811-402
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 402: Other tests - Water absorption tests - (IEC 60811-402: 2012); German version EN 60811-402: 2012
|
DIN EN 60811-403
|
VDE 0473-811-403
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 403: Other tests - Testing of ozone resistance for crosslinked mixtures - (IEC 60811-403: 2012); German version EN 60811-403: 2012
|
DIN EN 60811-404
|
VDE 0473-811-404
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 404: Other tests - Oil resistance tests for jackets - (IEC 60811-404: 2012); German version EN 60811-404: 2012
|
DIN EN 60811-405
|
VDE 0473-811-405
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 405: Other tests - Testing the thermal stability of PVC insulating sleeves and PVC sheaths - (IEC 60811-405: 2012); German version EN 60811-405: 2012
|
DIN EN 60811-406
|
VDE 0473-811-406
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 406: Other tests - Test of stress cracking resistance of polyethylene and polypropylene mixtures - (IEC 60811-406: 2012); German version EN 60811-406: 2012
|
DIN EN 60811-407
|
VDE 0473-811-407
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 407: Other tests - Measurement of the mass absorption of polyethylene and polypropylene mixtures - (IEC 60811-407: 2012); German version EN 60811-407: 2012
|
DIN EN 60811-408
|
VDE 0473-811-408
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 408: Other tests - Long term (life) test for polyethylene and polypropylene mixtures - (IEC 60811-408: 2012); German version EN 60811-408: 2012
|
DIN EN 60811-409
|
VDE 0473-811-409
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - - Part 409: Other tests - Test of loss of mass of thermoplastic insulating sleeves and jackets - (IEC 60811-409: 2012); German version EN 60811-409: 2012
|
DIN EN 60811-410
|
VDE 0473-811-410
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 410: Other tests - Test methods for oxygen aging under the influence of copper for polyolefin-insulated conductors - (IEC 60811-410: 2012); German version EN 60811-410: 2012
|
DIN EN 60811-411
|
VDE 0473-811-411
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 411: Other tests - Cold cracking resistance of fillers - (IEC 60811-411: 2012); German version EN 60811-411: 2012
|
DIN EN 60811-412
|
VDE 0473-811-412
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 412: Other tests - Thermal aging methods - Aging in a pressure chamber - (IEC 60811-412: 2012); German version EN 60811-412: 2012
|
DIN EN 60811-501
|
VDE 0473-811-501
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests to determine the mechanical properties of insulating and sheathing materials - (IEC 60811-501: 2012); German version EN 60811-501: 2012
|
DIN EN 60811-502
|
VDE 0473-811-502
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulating sheaths - (IEC 60811-502: 2012); German version EN 60811-502: 2012
|
DIN EN 60811-503
|
VDE 0473-811-503
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for jackets - (IEC 60811-503: 2012); German version EN 60811-503: 2012
|
DIN EN 60811-504
|
VDE 0473-811-504
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Low temperature bending tests for insulating sleeves and jackets - (IEC 60811-504: 2012); German version EN 60811504: 2012
|
DIN EN 60811-505
|
VDE 0473-811-505
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Low temperature elongation tests for insulating sleeves and jackets - (IEC 60811-505: 2012); German version EN 60811505: 2012
|
DIN EN 60811-506
|
VDE 0473-811-506
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Low temperature impact tests for insulating sleeves and jackets - (IEC 60811-506: 2012); German version EN 60811506: 2012
|
DIN EN 60811-507
|
VDE 0473-811-507
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Thermal expansion test for crosslinked materials - (IEC 60811-507: 2012); German version EN 60811-507: 2012
|
DIN EN 60811-508
|
VDE 0473-811-508
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Thermal pressure tests for insulating sleeves and jackets - (IEC 60811-508: 2012); German version EN 60811-508: 2012
|
DIN EN 60811-509
|
VDE 0473-811-509
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Testing of crack resistance of insulating sleeves and jackets (thermal shock test) - (IEC 60811-509: 2012); German version EN 60811-509: 2012
|
DIN EN 60811-510
|
VDE 0473-811-510
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene blends - Wrap test after thermal aging in air - (IEC 60811510: 2012); German version EN 60811-510: 2012
|
DIN EN 60811-511
|
VDE 0473-811-511
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt index of polyethylene blends - (IEC 60811-511: 2012); German version EN 60811-511: 2012
|
DIN EN 60811-512
|
VDE 0473-811-512
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene blends - Tensile strength and elongation at break after pretreatment at elevated temperature - (IEC 60811-512: 2012); German version EN 60811-512: 2012
|
DIN EN 60811-513
|
VDE 0473-811-513
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene mixtures - Wrap test after pretreatment - (IEC 60811-513: 2012); German version EN 60811-513: 2012
|
DIN EN 60811-601
|
VDE 0473-811-601
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the drop point of fillers - (IEC 60811-601: 2012); German version EN 60811-601: 2012
|
DIN EN 60811-602
|
VDE 0473-811-602
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 602: Physical tests - Oil separation from fillers - (IEC 60811-602: 2012); German version EN 60811-602: 2012
|
DIN EN 60811-603
|
VDE 0473-811-603
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 603: Physical tests - Total acid number measurement of fillers - (IEC 60811-603: 2012); German version EN 60811-603: 2012
|
DIN EN 60811-604
|
VDE 0473-811-604
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of the absence of corrosive substances in fillers - (IEC 60811-604: 2012); German version EN 60811-604: 2012
|
DIN EN 60811-605
|
VDE 0473-811-605
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 605: Physical tests - Measurement of carbon black and / or filler content in polyethylene blends - (IEC 60811-605: 2012); German version EN 60811605: 2012
|
DIN EN 60811-606
|
VDE 0473-811-606
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining density - (IEC 60811-606: 2012); German version EN 60811-606: 2012
|
DIN EN 60811-607
|
VDE 0473-811-607
|
2012-12
|
Cables, insulated wires and fiber optic cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the evaluation of soot distribution in polyethylene and in polypropylene - (IEC 60811-607: 2012); German version EN 60811-607: 2012
|
DIN EN 60230
|
VDE 0481-230
|
2003-03
|
Impulse voltage tests on cables and lines and their accessories - (IEC 60230: 1966); German version EN 60230: 2002
|
DIN EN 50395
|
VDE 0481-395
|
2006-07
|
Electrical test methods for low voltage cables and lines; - German version EN 50395: 2005
|
DIN EN 50395 / A1
|
VDE 0481-395 / A1
|
2012-03
|
Electrical test methods for low voltage cables and lines; - German version EN 50395: 2005 / A1: 2011
|
DIN EN 60885-2
|
VDE 0481-885-2
|
2004-11
|
Electrical test methods for power cables - Part 2: Partial discharge tests - (IEC 60885-2: 1987); German version EN 60885-2: 2003
|
DIN EN 60885-3
|
VDE 0481-885-3
|
2015-11
|
Electrical test methods for power cables - Part 3: Test methods for partial discharge measurement on lengths of extruded cables - (IEC 60885-3: 2015); German version EN 60885-3: 2015
|
DIN EN 62230
|
VDE 0481-2230
|
2014-12
|
Cables and insulated wires - Continuous voltage test - (IEC 62230: 2006 + A1: 2013); German version EN 62230: 2007 + A1: 2014
|
DIN EN 50200
|
VDE 0482-200
|
2016-07
|
Testing of the insulation integrity in the event of fire of cables with small diameters for use in emergency circuits with unprotected installation; - German version EN 50200: 2015
|
DIN EN 60332-1-1
|
VDE 0482-332-1-1
|
2005-06
|
Tests on cables, insulated lines and fiber optic cables in the event of fire - Part 1-1: Test of vertical flame spread on a wire, an insulated line or a cable - Test device - (IEC 60332-1-1: 2004); German version EN 60332-1-1: 2004
|
DIN EN 60332-1-2
|
VDE 0482-332-1-2
|
2005-06
|
Tests on cables, insulated lines and fiber optic cables in the event of fire - Part 1-2: Testing the vertical flame spread on a wire, an insulated line or a cable - Test method with a 1 kW flame with a gas / air mixture - (IEC 60332-1 -2: 2004); German version EN 60332-1-2: 2004
|
DIN EN 60332-1-3
|
VDE 0482-332-1-3
|
2005-06
|
Tests on cables, insulated lines and fiber optic cables in the event of fire - Part 1-3: Test of vertical flame spread on a wire, an insulated line or a cable - Test method for the assessment of burning droplets / parts - (IEC 60332-1-3: 2004); German version EN 60332-1-3: 2004
|
DIN EN 60332-2-1
|
VDE 0482-332-2-1
|
2005-06
|
Tests on cables, insulated wires and fiber optic cables in the event of fire - Part 2-1: Test of vertical flame spread on a small wire, insulated wire or cable - Tester - (IEC 60332-21: 2004); German version EN 60332-2-1: 2004
|
DIN EN 60332-2-2
|
VDE 0482-332-2-2
|
2005-06
|
Tests on cables, insulated wires and fiber optic cables in the event of fire - Part 2-2: Test of vertical flame spread on a small wire, a small insulated wire or a small cable - Test method with a luminous flame - (IEC 60332-2-2: 2004); German version EN 60332-2-2: 2004
|
DIN EN 60332-3-10
|
VDE 0482-332-3-10
|
2010-08
|
Tests on cables, insulated lines and fiber optic cables in the event of fire - Part 3-10: Test of vertical flame spread of vertically arranged bundles of cables and insulated lines - Test device - (IEC 60332-310: 2000 + A1: 2008); German version EN 60332-3-10: 2009
|
DIN EN 60332-3-21
|
VDE 0482-332-3-21
|
2010-08
|
Tests on cables, insulated lines and fiber optic cables in the event of fire - Part 3-21: Test of the vertical flame spread of vertically arranged bundles of cables and insulated lines - Test type AF / R - (IEC 60332-321: 2000, modified); German version EN 60332-3-21: 2009
|
DIN EN 60332-3-22
|
VDE 0482-332-3-22
|
2010-08
|
Tests on cables, insulated lines and fiber optic cables in the event of fire - Part 3-22: Testing of the vertical flame spread of vertically arranged bundles of cables and insulated lines - Test type A - (IEC 60332-3-22: 2000 + A1: 2008); German version EN 60332-3-22: 2009
|
DIN EN 60332-3-23
|
VDE 0482-332-3-23
|
2010-08
|
Tests on cables, insulated lines and fiber optic cables in the event of fire - Part 3-23: Test of the vertical flame spread of vertically arranged bundles of cables and insulated lines - Test type B - (IEC 60332-3-23: 2000 + A1: 2008); German version EN 60332-3-23: 2009
|
DIN EN 60332-3-24
|
VDE 0482-332-3-24
|
2010-08
|
Tests on cables, insulated lines and fiber optic cables in the event of fire - Part 3-24: Test of the vertical flame spread of vertically arranged bundles of cables and insulated lines - Test type C - (IEC 60332-3-24: 2000 + A1: 2008); German version EN 60332-3-24: 2009
|
DIN EN 60332-3-25
|
VDE 0482-332-3-25
|
2010-08
|
Tests on cables, insulated lines and fiber optic cables in the event of fire - Part 3-25: Test of flame spread of vertically arranged bundles of cables and insulated lines - Test type D - (IEC 60332-3-25: 2000 + A1: 2008); German version EN 60332-3-25: 2009
|
DIN EN 50362
|
VDE 0482-362
|
2003-11
|
Testing of insulation integrity in the event of fire of cables and lines with large diameters for use in emergency circuits with unprotected installation - German version EN 50362: 2003
|
DIN EN 50399
|
VDE 0482-399
|
2012-02
|
General test methods for the behavior of cables and insulated lines in the event of fire - Measurement of heat release and smoke generation during the test of flame spread - Test facility, test method and test result; - German version EN 50399: 2011
|
DIN EN 50575
|
VDE 0482-575
|
2015-04
|
Power cables and lines, control and communication cables - Cables and lines for general use in buildings with regard to requirements for reaction to fire; - German version EN 50575: 2014
|
DIN CLC / TS 50576
|
VDE V 0482-576
|
2015-04
|
Cables and Wires - Advanced Application of Test Results; - German version CLC / TS 50576: 2014
|
DIN EN 60754-1
|
VDE 0482-754-1
|
2015-08
|
Testing of the gases resulting from the combustion of the materials of cables and insulated lines - Part 1: Determination of the content of hydrohalic acid - (IEC 60754-1: 2011 + Corrigendum Nov. 2013); German version EN 60754-1: 2014
|
DIN EN 60754-2
|
VDE 0482-754-2
|
2015-08
|
Testing of the gases produced by the combustion of the materials of cables and insulated lines - Part 2: Determination of acidity (by measuring the pH value) and conductivity - (IEC 60754-2: 2011); German version EN 60754-2: 2014
|
DIN EN 61034-1
|
VDE 0482-1034-1
|
2014-09
|
Measurement of smoke density of cables and insulated lines when burning under defined conditions - Part 1: Test equipment - (IEC 61034-1: 2005 + A1: 2013); German version EN 61034-1: 2005 + A1: 2014
|
DIN EN 61034-2
|
VDE 0482-1034-2
|
2014-11
|
Measurement of the smoke density of cables and insulated lines when burning under defined conditions - Part 2: Test methods and requirements - (IEC 61034-2: 2005 + A1: 2013); German version EN 61034-2: 2005 + A1: 2013
|
DIN EN 61226
|
VDE 0491-1
|
2010-08
|
Nuclear power plants - Control systems with safety relevance - Categorization of control functions (IEC 61226: 2009); German version EN 61226: 2010
|
DIN EN 61513
|
VDE 0491-2
|
2013-09
|
Nuclear power plants - Control technology for systems with safety relevance - General system requirements - (IEC 61513: 2011); German version EN 61513: 2013
|
DIN EN 60987
|
VDE 0491-3-1
|
2015-06
|
Nuclear power plants - I&C systems with safety significance - Requirements for the hardware design of computer-based systems - (IEC 60987: 2007 + A1: 2013); German version EN 60987: 2015
|
DIN EN 60880
|
VDE 0491-3-2
|
2010-03
|
Nuclear power plants - Control technology for systems with safety-related importance - Software aspects for computer-based systems for the implementation of functions of category A - (IEC 60880: 2006); German version EN 60880: 2009
|
DIN EN 62138
|
VDE 0491-3-3
|
2010-03
|
Nuclear power plants - Control technology for systems with safety-related importance - Software aspects for computer-based systems for implementing functions of categories B or C - (IEC 62138: 2004); German version EN 62138: 2009
|
DIN EN 61500
|
VDE 0491-3-4
|
2011-12
|
Nuclear power plants - I&C with safety relevance - Data communication in systems that perform category A functions - (IEC 61500: 2009); German version EN 61500: 2011
|
DIN EN 62566
|
VDE 0491-3-5
|
2015-02
|
Nuclear power plants - Control technology for systems with safety-related importance - Development of HDL-programmed integrated circuits for systems that perform Category A functions - (IEC 62566: 2012); German version EN 62566: 2014
|
DIN IEC 62117
|
VDE 0491-4
|
2001-10
|
Nuclear power plants - Pressurized water reactors - Monitoring of sufficient cooling of the core when the reactor is switched off - (IEC 62117: 1999)
|
DIN EN 61839
|
VDE 0491-5
|
2015-01
|
Nuclear power plants - Design of control rooms - Analysis and assignment of functions - (IEC 61839: 2000); German version EN 61839: 2014
|
DIN EN 60964
|
VDE 0491-5-1
|
2010-08
|
Nuclear power plants - Maintenance - Design - (IEC 60964: 2009); German version EN 60964: 2010
|
DIN EN 62241
|
VDE 0491-5-2
|
2015-06
|
Nuclear power plants - Control room - Alarm functions and their representation - (IEC 62241: 2004); German version EN 62241: 2015
|
DIN IEC 61227
|
VDE 0491-5-3
|
2009-01
|
Nuclear power plants - Maintenance - Manual controls - (IEC 61227: 2008)
|
DIN EN 61772
|
VDE 0491-5-4
|
2013-09
|
Nuclear power plants - Maintenance - Use of visual equipment - (IEC 61772: 2009); German version EN 61772: 2013
|
DIN EN 60965
|
VDE 0491-5-5
|
2011-12
|
Nuclear power plants - Control room - Emergency control stations for shutting down the reactor without connection to the main control room - (IEC 60965: 2009); German version EN 60965: 2011
|
DIN IEC 60568
|
VDE 0491-6
|
2006-11
|
Nuclear power plants - Instrumentation with safety relevance - Core instrumentation for measuring the neutron flux density in power reactors - (IEC 60568: 2006)
|
DIN EN 60709
|
VDE 0491-7
|
2010-12
|
Nuclear power plants - I&C systems with safety relevance - Physical and electrical separation - (IEC 60709: 2004); German version EN 60709: 2010
|
DIN EN 62340
|
VDE 0491-10
|
2010-12
|
Nuclear power plants - I&C systems with safety significance - Requirements for the control of failures due to common cause - (IEC 62340: 2007); German version EN 62340: 2010
|
DIN EN 60671
|
VDE 0491-100
|
2011-12
|
Nuclear power plants - Control technology for systems with safety-related importance - Tests to ensure functionality - (IEC 60671: 2007); German version EN 60671: 2011
|
DIN EN 61526
|
VDE 0492-1
|
2013-09
|
Radiation protection measuring devices - Measurement of depth and surface personal dose Hp (10) and Hp (0.07) for X-ray, gamma, neutron and beta radiation - Directly readable personal dosimeters - (IEC 61526: 2010, modified); German version EN 61526: 2013
|
DIN EN 60846-1
|
VDE 0492-2-1
|
2015-01
|
Radiation protection measuring devices - Ambient and / or directional dose equivalent (power) measuring devices and / or monitors for beta, X-ray and gamma radiation - Part 1: Portable measuring devices and monitors for the workplace and the environment - (IEC 60846-1: 2009, modified); German version EN 60846-1: 2014
|
DIN EN 61005
|
VDE 0492-2-2
|
2005-03
|
Radiation protection measuring devices - Ambient equivalent dose (power) measuring devices for neutron radiation - (IEC 61005: 2003, modified); German version EN 61005: 2004
|
DIN EN 62387-1
|
VDE 0492-3-1
|
2012-08
|
Radiation protection measuring devices - Passive, integrating dosimetry systems for environmental and personal monitoring - Part 1: General properties and performance requirements - (IEC 62387-1: 2007, modified); German version EN 62387-1: 2012
|
DIN IEC / TS 62743
|
VDE V 0492-4-1
|
2013-04
|
Radiation protection measuring devices - Counting electronic dosimeters for pulsed fields of ionizing radiation - (IEC / TS 62743: 2012)
|
DIN EN 60761-1
|
VDE 0493-1-1
|
2005-05
|
Equipment for continuous monitoring of radioactivity in gaseous discharges - Part 1: General requirements - (IEC 60761-1: 2002, modified); German version EN 60761-1: 2004
|
DIN EN 60761-2
|
VDE 0493-1-2
|
2005-05
|
Equipment for continuous monitoring of radioactivity in gaseous discharges - Part 2: Particular requirements for monitors for radioactive aerosols including transurana aerosols - (IEC 60761-2: 2002, modified); German version EN 60761-2: 2004
|
DIN EN 60761-3
|
VDE 0493-1-3
|
2005-05
|
Equipment for continuous monitoring of radioactivity in gaseous discharges - Part 3: Particular requirements for monitors for radioactive noble gases - (IEC 60761-3: 2002); German version EN 60761-3: 2004
|
DIN EN 60761-4
|
VDE 0493-1-4
|
2005-05
|
Equipment for continuous monitoring of radioactivity in gaseous discharges - Part 4: Particular requirements for monitors for radioactive iodine - (IEC 60761-4: 2002); German version EN 60761-4: 2004
|
DIN EN 60761-5
|
VDE 0493-1-5
|
2005-05
|
Equipment for continuous monitoring of radioactivity in gaseous discharges - Part 5: Particular requirements for tritium monitors - (IEC 60761-5: 2002, modified); German version EN 60761-5: 2004
|
DIN IEC 61577-1
|
VDE 0493-1-10-1
|
2007-06
|
Radiation protection measuring devices - Devices for measuring radon and radon-derived products - Part 1: General requirements (IEC 61577-1: 2006)
|
DIN IEC 61577-2
|
VDE 0493-1-10-2
|
2015-03
|
Radiation protection measuring devices - Devices for measuring radon and radon-derived products - Part 2: Particular requirements for measuring devices for Rn-222 and Rn-220 - (IEC 61577-2: 2014)
|
DIN EN 61577-3
|
VDE 0493-1-10-3
|
2015-03
|
Radiation protection measuring devices - Devices for measuring radon and radon-derived products - Part 3: Particular requirements for measuring devices for radon-derived products - (IEC 61577-3: 2011, modified); German version EN 61577-3: 2014
|
DIN EN 61577-4
|
VDE 0493-1-10-4
|
2015-03
|
Radiation protection measuring devices - Devices for the measurement of radon and radon derivatives - Part 4: Equipment for the production of reference atmospheres with radon isotopes and their derivatives (STAR) - (IEC 61577-4: 2009, modified); German version EN 61577-4: 2014
|
DIN IEC 62302
|
VDE 0493-1-30
|
2008-10
|
Radiation protection measuring devices - Devices for sampling and monitoring of radioactive noble gases - (IEC 62302: 2007)
|
DIN IEC 62303
|
VDE 0493-1-50
|
2010-04
|
Radiation protection measuring devices - Equipment for monitoring tritium in air - (IEC 62303: 2008)
|
DIN EN ISO 16641
|
VDE 0493-1-6641
|
2016-05
|
Determination of radioactivity in the environment - Air - Radon-220: Integrating measurement methods for the determination of the mean activity concentration with passive solid-state trace detectors - (ISO 16641: 2014); German version EN ISO 16641: 2016
|
DIN EN ISO 11665-1
|
VDE 0493-1-6651
|
2015-11
|
Determination of radioactivity in the environment - Air: Radon-222 - Part 1: Radon and its short-lived by-products: Sources and measurement methods - (ISO 11665-1: 2012); German version EN ISO 11665-1: 2015
|
DIN EN ISO 11665-2
|
VDE 0493-1-6652
|
2015-11
|
Determination of radioactivity in the environment - Air: Radon-222 - Part 2: Integrative measurement method for the determination of the average value of the potential alpha energy concentration of the short-lived radon-derived products - (ISO 11665-2: 2012); German version EN ISO 11665-2: 2015
|
DIN EN ISO 11665-3
|
VDE 0493-1-6653
|
2015-11
|
Determination of radioactivity in the environment - Air: Radon-222 - Part 3: Point measurement method of the potential alpha energy concentration of the short-lived radon-derived products - (ISO 11665-3: 2012); German version EN ISO 11665-3: 2015
|
DIN ISO 11665-4
|
VDE 0493-1-6654
|
2013-05
|
Measurement of radioactivity in the environment - Air: Radon-222 - Part 4: Integrating measurement method for determining the average value of the activity concentration by means of passive sampling and time-delayed evaluation - (ISO 11665-4: 2012)
|
DIN EN ISO 11665-5
|
VDE 0493-1-6655
|
2015-11
|
Determination of radioactivity in the environment - Air: Radon-222 - Part 5: Continuous measurement method for activity concentration - (ISO 11665-5: 2012); German version EN ISO 11665-5: 2015
|
DIN EN ISO 11665-6
|
VDE 0493-1-6656
|
2015-11
|
Determination of radioactivity in the environment - Air: Radon-222 - Part 6: Point measurement method for activity concentration - (ISO 11665-6: 2012); German version EN ISO 11665-6: 2015
|
DIN EN ISO 11665-7
|
VDE 0493-1-6657
|
2015-11
|
Determination of radioactivity in the environment - Air: Radon-222 - Part 7: Enrichment method for estimating the surface exhalation rate - (ISO 11665-7: 2012); German version EN ISO 11665-7: 2015
|
DIN ISO 11665-8
|
VDE 0493-1-6658
|
2013-08
|
Determination of radioactivity in the environment - Air: Radon-222 - Part 8: Methodology for the initial assessment and for additional investigations in buildings - (ISO 11665-8: 2012)
|
DIN EN 60325
|
VDE 0493-2-1
|
2005-02
|
Radiation protection measuring devices - Alpha, beta and alpha / beta (beta energy> 60 keV) contamination measuring devices and monitors - (IEC 60325: 2002, modified); German version EN 60325: 2004
|
DIN EN 61098
|
VDE 0493-2-2
|
2008-02
|
Radiation protection measuring devices - Permanently installed personal contamination monitors - (IEC 61098: 2003, modified); German version EN 61098: 2007
|
DIN EN 61582
|
VDE 0493-2-3
|
2007-02
|
Radiation protection measuring devices - Devices for in vivo monitoring - Whole and partial body counters - Classification, general requirements and test methods for portable, transportable and permanently installed devices - (IEC 61582: 2004, modified); German version EN 61582: 2006
|
DIN EN 62363
|
VDE 0493-2-4
|
2012-02
|
Radiation protection measuring devices - Portable surface contamination measuring devices and monitors for photon radiation (IEC 62363: 2008, modified); German version EN 62363: 2011
|
DIN EN 62022
|
VDE 0493-3-1
|
2008-01
|
Fixed monitors for the monitoring and detection of gamma-ray emitters in recyclable or non-recyclable materials transported by vehicles - (IEC 62022: 2004, modified); German version EN 62022: 2007
|
DIN EN 62244
|
VDE 0493-3-2
|
2012-02
|
Radiation protection measuring devices - Permanently installed radiation monitors for the detection of radioactive substances and fissile nuclear material at national borders - (IEC 62244: 2006, modified); German version EN 62244: 2011
|
DIN EN 62327
|
VDE 0493-3-3
|
2012-02
|
Radiation protection measuring devices - Hand-held devices for the detection and identification of radionuclides and the display of the ambient dose equivalent rate generated by gamma radiation - (IEC 62327: 2006, modified); German version EN 62327: 2011
|
DIN IEC 62401
|
VDE 0493-3-4
|
2009-01
|
Radiation protection measuring devices - Pocket-sized radiation measuring devices for the detection of illegally transported radioactive sources - (IEC 62401: 2007)
|
DIN EN 62484
|
VDE 0493-3-5
|
2016-06
|
Radiation protection measuring devices - Spectroscopy-based portal monitors for the detection and identification of the illicit trade in radioactive substances - (IEC 62484: 2010); German version EN 62484: 2015
|
DIN IEC 62533
|
VDE 0493-3-6
|
2013-04
|
Radiation protection measuring devices - Highly sensitive handheld devices for the detection of photon radiation emitting radioactive material - (IEC 62533: 2010)
|
DIN EN 62534
|
VDE 0493-3-7
|
2016-06
|
Radiation protection measuring devices - Highly sensitive handheld devices for the detection of radioactive material emitting neutron radiation - (IEC 62534: 2010); German version EN 62534: 2015
|
DIN IEC 62694
|
VDE 0493-3-10
|
2015-02
|
Radiation protection measuring devices - Backpack radiation protection detector for the detection of unauthorized transport of radioactive materials - (IEC 62694: 2014)
|
DIN EN 60861
|
VDE 0493-4-2
|
2008-10
|
Equipment for the monitoring of radionuclides in liquid discharges and surface waters - (IEC 60861: 2006, modified); German version EN 60861: 2008
|
DIN IEC 61275
|
VDE 0493-4-3
|
2014-12
|
Radiation protection measuring devices - Measurement of individual radionuclides in the environment - In-situ photon spectrometry system with germanium detector - (IEC 61275: 2013)
|
DIN ISO 18589-2
|
VDE 0493-4-5892
|
2015-10
|
Determination of radioactivity in the environment - Soil - Part 2: Guideline for the selection of the sampling strategy, sampling and pretreatment of the samples - (ISO 18589-2: 2015)
|
DIN ISO 18589-3
|
VDE 0493-4-5893
|
2015-10
|
Determination of radioactivity in the environment - Soil - Part 3: Measurement of gamma-ray emitting radionuclides using gamma spectrometry - (ISO 18589-3: 2015)
|
DIN EN ISO 18589-7
|
VDE 0493-4-5897
|
2016-05
|
Determination of radioactivity in the environment - Soil - Part 7: In-situ measurement of gamma-ray emitting radionuclides - (ISO 18589-7: 2013); German version EN ISO 18589-7: 2016
|
DIN IEC 61559-1
|
VDE 0493-5-1
|
2010-04
|
Radiation protection instrumentation in nuclear facilities - Central systems for continuous monitoring of radiation and / or the activity level - Part 1: General requirements - (IEC 61559-1: 2009)
|
DIN VDE 0493-100
|
VDE 0493-100
|
2010-05
|
Radiation protection measuring devices - Part 100: Periodic testing of portable contamination monitors
|
DIN VDE 0493-110
|
VDE 0493-110
|
2010-02
|
Radiation protection measuring devices - Part 110: Periodic testing of permanently installed personal contamination monitors
|
DIN VDE 0493-200
|
VDE 0493-200
|
2011-03
|
Radiation protection measuring devices - recurring testing of permanently installed full and partial body counters
|
DIN IEC / TR 62461
|
VDE 0493-1000
|
2015-07
|
Radiation protection measuring devices - Determination of uncertainty when measuring - (IEC / TR 62461: 2015)
|