Fendt Fix 2
| Fendt | |
|---|---|
|
|
| FL 120 / FW 120 | |
| Manufacturer: | [[ Fendt ]] |
| Sales designation: | Fix 2 L / Fix 2 W |
| Production period: | 1959-1964 |
| Engines: | MWM 2-cylinder 13.2-13.9 kW, 18-19 PS |
| Length: | 2890 mm |
| Width: | 1520 mm |
| Height: | 1480 mm |
| Wheelbase: | 1750 mm |
| Gauge: | 1250/1500 mm |
| Turning radius: | 3200 mm |
| Ground clearance: | 400 mm |
| Standard tires: | front: 5.00-16 ASF
back: 8-28 AS |
| Top speed: | 20 km / h |
| Empty weight: | 1265 kg |
| Previous model: | Fendt Fix 1 |
| Successor: | Fendt Fix 2 D |
The Fendt Fix 2 is a tractor from the "ff" series built from 1959 (Fendt Fix, Farmer and Favorit). It was offered as a Fix 2 W (FW 120) with a water-cooled motor and 18 HP continuous output and as a Fix 2 L (FL 120) in an air-cooled version with 19 HP continuous output. It was the further development of Fix 1.
When the model was introduced, Fendt praised the “technically mature design” and the advantageous combination of “aesthetics and driving comfort”. Among other things, the hood with built-in headlights (DGBM) was noticeable at the time. The water-cooled version was built until 1964, the air-cooled only until 1962.
engine
FW 120
- 18 HP: water-cooled two-cylinder four-stroke diesel engine from MWM, KD 211 Z with 1250 cm³ displacement, swirl chamber process, pressure circulation lubrication, Bosch injection pump, oil bath air filter, water circulation cooling with pump, two-circuit thermostat
- Bore = 85 mm, stroke = 110 mm
- Compression = 18: 1
- Speed range = 650-2120 / min.
- Oil pressure at idling speed = 0.5 atm, at maximum speed = 2.0 atm
- Injection pressure = 125 atm
- Bosch injection nozzle, type: DN 8 S 2
- Bosch fuel filter, type: FJ / DF 5/103 or Knecht, type: FB 502/1 LM
FL 120
- 19 HP: air-cooled two-cylinder four-stroke diesel engine from MWM, AKD 311 Z with 1400 cm³ displacement, direct injection, Bosch injection pump, pressure circulation lubrication, oil bath air filter and axial fan
- Nominal speed for both versions: approx. 2000 rpm
- Bore = 90 mm, stroke = 110 mm
- Compression = 19: 1
- Speed range = 650-2120 / min.
- Oil pressure at idling speed = 0.5 atm, at maximum speed = 2.0 atm
- Injection pressure = 125 atm
- Bosch injection nozzle, type: DN SOD 126
- Bosch fuel filter, type: FJ / DF 5/103 or Knecht, type: FB 502/1 LM
coupling
- Single-disc dry clutch from Fichtel & Sachs, type: K 12 (K 200)
transmission
- Fendt group gearbox
- Gears in constant mesh
- Robust and proven Fendt transmission with 6 forward and 2 reverse gears, on request, 3 super crawler gears forwards and 1 reverse crawler gear
- 5-claw differential lock
Forward and reverse speeds
| Speeds (at full engine speed) | |
|---|---|
| 1st gear | approx. 0.8-1.7 km / h |
| 2nd gear | approx. 3.0 km / h |
| 3rd gear | approx. 4.8 km / h |
| 4th gear | approx. 7.2 km / h |
| 5th gear | approx. 12.3 km / h |
| 6th gear | approx. 20.0 km / h |
| 1. Reverse gear | approx. 2.6 km / h |
| 2. reverse gear | approx. 10.6 km / h |
| Additional speeds (with optional creeper gear) | |
| 1. Creep speed | approx. 0.3-0.7 km / h |
| 2. Creep speed | approx. 0.6–1.2 km / h |
| 3. Creep speed | approx. 1.0–2.0 km / h |
| Reverse crawl speed | approx. 1.0 km / h |
PTO
- Rear PTO as a clutch-dependent gear PTO with standard speed according to DIN 9611
- Speed = 570 / min. at nominal speed / power = FL: 18.2 HP, FW: 17.2 HP
- Optionally switchable as ground speed PTO
- Ground speed PTO with 6 revolutions per meter, can be used for drive-axle trailers from second gear
- Optionally with pulley, 170 mm diameter and 95 mm width
- Speed = 1905 / min. at nominal speed / power = FL: 17.5 HP, FW: 16.5 HP
- Belt speed = 16.9 m / s.
Brakes
- Inner shoe brake, 300x50 Z acting on the rear wheels with split double pedal as steering brake
- Hand lever parking brake; Gear handbrake on request (duplex brake 180x30 D)
axes
- Fendt front axle: stable, sprung swing axle (DBP)
steering
- smooth worm steering (organically built into the clutch housing)
Hydraulic system and power lift
- Fendt three-point hydraulic system in block design, type: 80.05, working capacity 7475 Nm, standardized connections according to DIN 9674, adjustable lifting struts and upper link, three-point hitch rail
- the new Fendt hydraulic pressure system (DBP ang.) enables additional loading of the rear axle with attachments. The additional pressure on the rear axle can be finely dosed with the control unit. It increases the pulling force of the Fix 2 and reduces the slip of the rear wheels in poor ground conditions.
- Lifting cylinder with 80 mm piston diameter and 101 mm piston travel
- Bosch delivery pump with 11 l / min. at 150 atmospheric pressure
Control units
- Newly developed control unit of the Fendt type for handling the block hydraulics - the option to slowly lower the attachments was particularly emphasized at the time
- Optional equipment: switching device for power lift and tipping trailer
Electrical equipment
- 12 V system with bilux device according to StVZO
- illuminated dashboard
- Bosch starter 12V-1.8 HP
- Bosch alternator 12V-90 W
- Bosch battery 12V-60 Ah
- Bosch glow plugs, type: KE / GA 2/1 or Beru, type: 294 GK
Dimensions and dimensions
- Length = 2890 mm, width = 1520 mm, height without roof = 1480 mm
- Dead weight = 1265 kg / permissible total weight = 2000 kg
Tires
- front: 5.00-16, on request 5.50-16
- rear: 8-28, on request in special equipment: 8-32, 9-30, 10-24, 10-28 (?)
Filling quantities
- Fuel tank: approx. 30 l
- Transmission oil including axle drive = 16.5 l
- Hydraulics = 8 l (with crawler gear = 10 L)
- Steering = 1 l
- Oil bath air filter = 0.5 l
- Engine oil = 4.5 l
- Cooling water = 7 l
consumption
- Annual average fuel consumption: 1.35 l / h or 185 g / PSh
- Lubricating oil consumption = 2–3 g / PSh at rated output
cabin
- Driver's platform with rubber-sprung seat and left fender seat
- Optional, all-weather hood with panoramic window and right wing seat
Special equipment
- Fendt mower 4½ 'and 5'
- Belt drive 1905 / min
- All-weather hood with flashing lights
- Loading weights
- Steering wheel lock
- Start stop
- Grid wheels (with 8-28 segment grid wheels)
- Searchlight
- asymmetrical low beam
- second lifting strut adjustment
- Fuel feed pump
- rigid hitch, long
Others
The rubber-sprung driver's seat of the Fix 2 can be adjusted according to the driver's height and weight. There is a fender bench on the left. The trailer hitch at the rear is rotatable and height-adjustable, the front trailer hitch is rigid.
- Air-cooled version: technical designation: FL 120 (4,249 copies), production time: 1959–1963
- water-cooled version: technical designation: FW 120 (2,292 copies), production time: 1959–1964
- List price 1959 for both versions: 7,650 DM
literature
- A. Mößmer: Fendt - The type book. Page 50.
- G. Kremer: Fendt, types and dates. Page 212.
- G. Kremer: Fendt, Schlepper Brochures from 1930 to 1966. Page 102.