Bristol Braemar: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
Cydebot (talk | contribs)
m Robot - Moving category British bomber aircraft 1910-1919 to Category:British bomber aircraft 1910–1919 per CFD at Wikipedia:Categories for discussion/Log/2011 September 20.
→‎See also: wl presentation
Line 84: Line 84:
{{Aircontent
{{Aircontent
|related=
|related=
* [[Bristol Pullman|Bristol Types 26 and 33 Pullman]]
* [[Bristol Pullman]]
* [[Bristol Tramp|Bristol Types 37 and 44 Tramp]]
* [[Bristol Tramp]]
|similar aircraft=*[[Vickers Vimy]]<br />
|similar aircraft=*[[Vickers Vimy]]<br />
*[[Handley Page V/1500]]
*[[Handley Page V/1500]]

Revision as of 17:26, 29 September 2011

Bristol Types 24 and 25 Braemar
Role Heavy bomber
Manufacturer Bristol Aeroplane Company
Designer Frank Barnwell
First flight 1918-08-13
Number built 2
Developed into Bristol Pullman

The Bristol Braemar was a British heavy bomber aircraft developed at the end of the First World War for the Royal Air Force. Only two prototypes were constructed.

Development

The prototype Braemar was developed in response to the establishment of the Independent Air Force in October 1917, as a bomber capable of the long-range bombing of Berlin if necessary. A large triplane, it had internal stowage for up to six 250 lb (110 kg) bombs.

The initial design featured a unique engine installation with a central engine room housing all four engines. The engines were to be geared in pairs and power taken from the engines to the four propellers by power shafts. This design was abandoned early in development, and both the completed Braemars had a conventional engine installation, with the engines in inline tandem pairs, driving pusher and tractor propellers. However, the engine-room design was resurrected later in the Braemar's development life, for the proposed steam-powered Tramp.

The first prototype Braemar flew on 13 August 1917, with four Siddeley Puma engines of 230 hp (170 kW) each. The prototype showed generally good performance with a top speed of 106 mph (171 km/h), but there were complaints from the test pilots about the view from the cockpit and the controls, and so the next aircraft produced was an improved version designated Braemar Mk.II. The Mk.II had considerably more power, in its four Liberty L-12 engines of 400 hp (300 kW), which gave it an improved speed of 125 mph (201 km/h).

The Braemar never entered service with the RAF, and the two prototypes were the only Braemars built. The Braemar design was subsequently developed as the Pullman passenger aircraft.

Specifications (Braemar Mk.II)

Data from [citation needed]

General characteristics

  • Crew: 6 - two pilots, wireless operator, engineer and two gunners

Performance Armament

  • Guns: 2 × 0.303 in (7.7 mm) machine guns
  • Bombs: 1,500 lb (680 kg)

See also

Related development

Aircraft of comparable role, configuration, and era

Related lists

References

  • Barnes C.H. (1964). Bristol Aircraft Since 1910. Putnam & Company Ltd. ISBN 0-370-00015-3.