Triumph Speedmaster

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Dennis Bratland (talk | contribs) at 19:19, 4 July 2012 (misc cleanup). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Triumph Speed Master
ManufacturerTriumph Motorcycles Ltd
Production2002–2004 790 cc (48 cu in)
2005–2007 865 cc (52.8 cu in) (carburettor)
since 2007 865 cc (52.8 cu in) (fuel injection)
Engine865 cc (52.8 cu in) air-cooled, DOHC, parallel-twin, 270°
Power61 bhp (45 kW) @ 6,800 rpm[citation needed]
Torque55 lbf⋅ft (75 N⋅m) @ 3,300 rpm[citation needed]
Transmission5-speed gearbox, chain final drive
Wheelbase1,660 mm (65.2 in)
DimensionsL: 2,420 mm (95.3 in)
W: 830 mm (32.7 in)
H: 1,160 mm (45.7 in)
Seat height720 mm (28.3 in)
Weight229 kg (504 lb)[citation needed] (dry)
Fuel capacity4.3 imp gal (20 L; 5.2 US gal)

The Speed Master is a Triumph Motorcycles Ltd motorcycle designed and built in Hinkley, Leicestershire. Launched in 2002 with a 790 cc (48 cu in) twin-cylinder engine, the displacement was increased to 865 cc (52.8 cu in) in 2005 and the Speed Master was upgraded to fuel injection in 2007.[1]

Development

The Triumph Speed Master was launched in 2003 as a 'factory custom' cruiser based on the Bonneville America. The original model had the 790 cc (48 cu in) air-cooled DOHC twin engine and had an extended 1,660 mm (65.2 in) wheelbase with the crankshaft at 270 degrees. Main differences from the Bonneville America included black finish to the engine, shortened gearing, a flat handlebar on risers, one piece saddle and cast alloy wheels with twin front discs, in place of the single disc of the America. The 'Speed Master' name was last used in 1965 for the Bonneville T120R by American importers but not by the Triumph factory.[2]

In 2005, the engine capacity was increased to 865 cc (52.8 cu in) (carburettor-fuelled) delivering peak power at 6,500 rpm, with maximum torque of 68Nm available at 3,500 rpm.[1] In 2007, a multipoint sequential fuel injection model was launched, with a new design alloy wheels, a restyled chain cover, pillion footrest hanger and upper fork shrouds, as well as slash cut silencers and four new paint schemes.[1]

See also

References

  1. ^ a b c [better source needed]"2005 Triumph Speedmaster". Retrieved 2009-04-16.
  2. ^ "First Ride: Triumph Speedmaster Motorcycle". Retrieved 2009-04-16.

External links