Concrete core temperature control
The term concrete core temperature control or component activation refers to the temperature control of a building via pipes laid in the building ceiling with the help of a heat transfer fluid .
With this process, the building is cooled in summer and heated in winter. The laying of the lines in the building ceiling allows for a uniform and pleasant temperature control, since the adjacent walls also contribute to the temperature output. In most cases in which concrete core temperature control is used, there is no need for additional heating. Since the concrete core temperature control is operated at low temperatures (approx. 18 ° C in summer and approx. 26 ° C in winter), it is ideal for geothermal use in conjunction with a heat pump . For this reason, this temperature control method is often used in projects where energy is to be used sparingly.
Buildings with concrete core temperature control
- NEW Blauhaus Mönchengladbach
- Energon Ulm
- Energy Office Bremen
- E.ON Energy Research Center in Aachen
- Hans-Sachs-Haus Gelsenkirchen (since reopening on September 2, 2013)
- Freiburg University Library (new building on the university square)
- Higher Regional Court of Hamm
Individual evidence
- ↑ Concept of the Energy Office ( Memento of the original from September 6, 2013 in the Internet Archive ) Info: The archive link was inserted automatically and has not yet been checked. Please check the original and archive link according to the instructions and then remove this notice. accessed on August 19, 2013
- ↑ [1] accessed on October 11, 2017
- ↑ StadtSpiegel Gelsenkirchen: Stadtspiegel readers in the Hans-Sachs-Haus , Saturday, August 31, 2013.
- ↑ Freiburg University Library Technical Data , accessed on January 30, 2016
- ↑ Huge crane at the OLG raises questions - Lots of photos. September 23, 2019, accessed September 23, 2019 .
