DIN 7157

from Wikipedia, the free encyclopedia
Logo of the German Institute for Standardization DIN 7157
Area Fits
title Fit selection
Brief description: Clearance and oversize in fitting systems
Latest edition 1.1966
ISO 286

The DIN standard DIN 7157 defines fit selections in the fit systems of standard bore and standard shaft . The following illustration is an extract from the selection of fits defined in DIN 7157.

Combinations in the unit bore system with clearance (clearance fits):

Drilling: H11 H8 H8 H8 H7 H7 H8 H7
Wave: d9 d9 e8 f7 f7 g6 h9 h6

Combinations in the unit bore system with clearance or oversize (transition fits):

Drilling: H7 H7 H7
wave j6 k9 n6

Combinations in the system of unit bore with oversize (press fits):

drilling H7 H7 H8 H8
wave r6 s6 u8 x8

Combinations in the unit shaft system with clearance (clearance fits):

drilling C11 C11 D10 E9 F8 F8 G7 H8
wave h11 h9 h9 h9 h9 h6 h6 h9

No transition or press fits are specified in this DIN for the standard shaft system.

literature

Metal table book , ISBN 3-8085-1086-2