ISYBAU exchange format

from Wikipedia, the free encyclopedia

The ISYBAU exchange formats serve the standardized exchange of data for planning, building and operating wastewater systems (e.g. sewers and manholes) in federal properties. They are used in particular for the inventory and condition of sewage systems in federal properties between those involved in the project (e.g. between the engineering office and the inspection company). The ISYBAU exchange formats guarantee a standardized, IT-oriented data exchange and are a prerequisite for uniform inventory documentation of wastewater systems in federal properties. The ISYBAU exchange formats were originally created in the joint Isybau project of the federal and state governments, which was used to equip the building administrations with dv technology. They are now part of the Waste Water Working Aids (see Waste Water Working Aids - Planning, Construction and Operation of Sewage Systems in Federal Properties).

scope

The ISYBAU exchange formats enable the uniform and consistent exchange of digital data from all wastewater systems. These are according to the property types

  • Attitudes,
  • Cables,
  • Gutters,
  • Flumes,
  • Manholes,
  • Connection points,
  • Special structures and
  • Rainwater management systems

distinguished. In addition, the special structures and systems for rainwater management are further differentiated (see Table 1). The complete scope of the ISYBAU exchange formats is described in the Waste Water Working Aids.

Table 1: Special structures and systems for rainwater management
Special structures
pool
  • Rain overflow basin
  • Rain clarifier without permanent backlog
  • Rain overflow basin
  • Rain clarifier
  • Rain clarifier with permanent backlog
  • Rainwater retention basin
  • Rainwater retention basin
  • Rain retention ditch
  • Mechanical retention filter with upstream retention
  • Mechanical retention filter
  • Soil filter with upstream retention
  • Retention soil filter
 Treatment plants
  • Neutralization systems
  • Combination systems
  • Mud traps
  • Light liquid separator
  • Starch separator
  • Grease trap
  • Emulsion splitting plant
  • Stacking basin
Pumping stations Chokes
Sewage treatment plants Slider
Outlet structures Rake
pump Sieves
Weirs / overflows
Rainwater management systems
Cisterns Infiltration shafts
Infiltration basins / pond Infiltration areas
Pipe / trench infiltration

history

Table 2: History of the ISYBAU exchange formats
year annotation Exchange format
1991 Introduction of the ISYBAU exchange formats (ASCII format) as part of the ISYBAU-oriented action plan (preliminary IT-supported conception for recording, evaluating, updating and documenting wastewater systems in federal and state properties).
  • Master data reaches, shafts type K
  • Status data reaches, shafts type H, S
  • Condition of special structures type Z
1996 Expansion of the ISYBAU exchange formats in connection with the introduction of the waste water working aids, 1st edition: Planning of waste water systems - recording, evaluation and support of existing waste water systems in federal properties.
  • Lines type LK, LH
  • Special structures type ST, SY
  • Hydraulics type EY
1999 Expansion of the ISYBAU exchange formats.
  • Rainwater management type VA, RN, GW, BO, UF
  • Sewer rehabilitation type KS
2001 Modification of the abbreviation system of the ISYBAU exchange formats in connection with the introduction of the wastewater working aids, 2nd edition (Internet / CD-ROM): Planning, construction and operation of wastewater systems in federal properties.
  • Modification for the abbreviations Type H, LH, S
2003 Expansion of the ISYBAU exchange formats.
  • Synchronization digit. State films type ZF (XML)
  • Geometry type V (XML)
2006 Introduction of the ISYBAU exchange formats (XML-2006).
2013 Introduction of the ISYBAU exchange formats (XML-2013).
2018 Introduction of the ISYBAU exchange formats (XML-2017).
  • Approach to the DWA M 150 (specification of the material for connecting cables and the use of standardized comments)


scope

As part of the planning, construction and operation of wastewater systems in federal properties, the ISYBAU exchange formats guarantee standardized, IT-oriented data exchange between the client (e.g. state construction management) and contractor (e.g. engineering office) or others Project participants (e.g. engineering office for surveying or inspection company).

The area of ​​application of the ISYBAU exchange formats wastewater in the building management is the exchange between the introduced recording and testing software, the associated hydraulic specialist programs and the existing documentation with the property information system outdoor facilities LISA or other tools that have a verifiably functional ISYBAU XML interface.

distribution

The ISYBAU exchange formats in XML format as well as the ISYBAU exchange formats in ASCII format valid until 2006 are available on the OFD Hanover website in the Downloads section of the sewage work aids. The complete data scope of the ISYBAU exchange formats (XML-2006) and (XML-2013) is described in detail in the Wastewater Working Aids in Appendix A-7.

Web links