SVCam-ECO

from Wikipedia, the free encyclopedia
SVCam-ECO
SVCam-ECO Series II.JPG
Type: industrial camera
Lens connection : CS / C.Mount
Image sensor : CCD
Sensor size: 1/4 "- 2/3"
Resolution : VGA - 5 megapixels
Image size: 656 × 492 pixels - 2,448 - 2,050 pixels
Aspect ratio : 4: 3
File formats : RAW (8bit / 12bit)
Operating modes: Trigger & Exposure Modes, AOI, Monochrome / Bayer Pattern
Frame rate : 10-155 fps
Regulation: Auto-exposure, auto-gain
Correction : Tab balancing, pixel / field correction
Closure : global shutter
Data interface : GigE vision
Power supply: PoE , Hirose 12-pin; 6 -24 V
Casing: aluminum
Dimensions: approx. 38 mm × 33 mm × 38 mm

The SVCam-ECO is a camera for industrial image processing . It is built by SVS-VISTEK in Germany. When it was launched at VISION Stuttgart 2008, with dimensions of 38 mm × 33 mm × 38 mm, it was the smallest industrial camera with the GigE Vision standard.

Sensors

The SVCam-ECO is equipped with CCD sensors from Sony .

Executions

The SVCam-ECO is available in three housing forms. Standard, PoE and IP67. In the IP67 design, BlackLine, it complies with protection class IP67. It is 'dust-tight' and 'completely protected against contact'. It is also protected against a 'strong jet of water'.

Web links

http://www.svs-vistek.com/de/de/svcam-kameras/svs-svcam-eco.php

Individual evidence

  1. Press release on the appearance of SVCam ECO  ( page no longer available , search in web archivesInfo: The link was automatically marked as defective. Please check the link according to the instructions and then remove this notice.@1@ 2Template: Toter Link / www.pressebox.de  
  2. membership in the AIA guarantees compliance with the AIA standards; including GigE-Vision
  3. Article from Quality Engineering November 16, 2011