C-One

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Pnm (talk | contribs) at 23:11, 19 February 2011 (removed Category:Computing:Reconfigurable using HotCat). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

The C-One

The C-One is a single-board computer designed by Jeri Ellsworth, a self-taught designer, and Jens Schönfeld from Individual Computers, who manufactured the boards themselves. It was initially created in 2002 as an enhanced Commodore 64 home computer, but has been reengineered to allow cloning of other 8-bit computers.

The machine uses a combination of configurable Field-Programmable Gate Array (FPGA) chips and modular CPU expansion cards to create compatibility modes that duplicate the function of many older home computers. The default CPU is the 65C816 CPU which is used in Commodore 64 compatibility mode as well as the C-One's native operating mode. The C-One is not merely a software emulator, it loads various "core" files from disk to configure the FPGA hardware to recreate the operation of the core logic chipsets found in vintage computers. This provides for a very accurate and customizable hardware emulation platform. The C-One is by no means limited to recreating historical computers - its programmable core logic can be used to create entirely new custom computer designs.

In 2004 the platform was expanded to include an Amstrad CPC core made by Tobias Gubener.

In 2006 Peter Wendrich ported his FPGA-64 project (originally intended for a Xilinx FPGA) and enhanced it for the C-One [1]. This core supported both PAL and NTSC machine emulation, and aimed to be cycle-exact and emulate many of the bugs and quirks of the original hardware.

In 2008, after development of an "Extender" card which added a third FPGA, Tobias Gubener added Amiga 500 compatibility by porting Dennis van Weeren's Minimig code to the board [2]. This core replaced the physical 68000 CPU and the PIC chip from the original with his own TG68 CPU core on the FPGA. Recent developments to this core include features not possible with the original Minimig board [3].

In 2009 Peter Wendrich released a "preview" of a next-generation C64 core called "Chameleon" [4], with a greatly expanded specification compared to his earlier core, although some features available in his earlier core are not yet re-implemented. A new version of the CPC core was also released in mid 2009, featuring an embedded SymbOS core for control of device emulation, and a clock unlocked mode for cpu speeds of up to 80MHz.

So far, C-One circuit boards have been produced by German company Individual Computers, and they currently sell for 333 with the FPGA extender card.

See also

External links