Explorer 31: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
Updated
Added Experiment 2
Line 14: Line 14:
| COSPAR_ID = 1965-098B
| COSPAR_ID = 1965-098B
| SATCAT = 01806
| SATCAT = 01806
| mission_duration = 5 years (achieved)
| mission_duration =


| spacecraft = Explorer XXXI
| spacecraft = Explorer XXXI
Line 29: Line 29:


| entered_service = 29 November 1965
| entered_service = 29 November 1965
| last_contact = 15 January 1971
| last_contact =
| destroyed =
| destroyed =
| decay_date =
| decay_date = 21 February 1967


| orbit_reference = [[Geocentric orbit]] <ref name="Trajectory">{{cite web|url=https://nssdc.gsfc.nasa.gov/nmc/spacecraft/displayTrajectory.action?id=1965-098B|title=Trajectory: Explorer 31 (DME-A) 1965-098B |publisher=NASA|date=28 October 2021|access-date=9 November 2021}} {{PD-notice}}</ref>
| orbit_reference = [[Geocentric orbit]] <ref name="Trajectory">{{cite web|url=https://nssdc.gsfc.nasa.gov/nmc/spacecraft/displayTrajectory.action?id=1965-098B|title=Trajectory: Explorer 31 (DME-A) 1965-098B |publisher=NASA|date=28 October 2021|access-date=9 November 2021}} {{PD-notice}}</ref>
Line 64: Line 64:


== Experiments ==
== Experiments ==
=== Cylindrical Electrostatic Probes ===

The cylindrical electrostatic probes were used to measure [[electron]] temperature and density in the [[ionosphere]]. Each sensor was basically a [[Langmuir probe]] consisting of a collector [[electrode]] extending from the central axis of a cylindrical guard ring. The guard rings extended {{cvt|23|cm}} from the spacecraft and the collector electrode extended {{cvt|46|cm}}. The two sensors were mounted on opposite sides of the spacecraft, and were perpendicular to the [[Rotation around a fixed axis|spin axis]] and in the orbit plane. Data sets are no longer available from this experiment.<ref name=Experiment2>{{cite web|url=https://nssdc.gsfc.nasa.gov/nmc/experiment/display.action?id=1965-098B-02| Experiment: Cylindrical Electrostatic Probes|publisher=NASA|date=28 October 2021|access-date=9 November 2021}} {{PD-notice}}</ref>










== See also ==
== See also ==

Revision as of 11:00, 9 November 2021

Explorer 31
Explorer 31 satellite
NamesDME-A
Direct Measurement Explorer-A
Mission typeEarth science
OperatorNASA
COSPAR ID1965-098B Edit this at Wikidata
SATCAT no.01806
Spacecraft properties
SpacecraftExplorer XXXI
Launch mass98.9 kg (218 lb)
Start of mission
Launch date29 November 1965, 04:48:47 GMT [1]
RocketThor SLV-2 Agena B (Thor 453 / Agena 6102 (TA5))
Launch siteVandenberg, SLC-2E
ContractorDouglas Aircraft Company / Lockheed Corporation
Entered service29 November 1965
End of mission
Decay date21 February 1967
Orbital parameters
Reference systemGeocentric orbit [2]
RegimeLow Earth orbit
Perigee altitude505 km (314 mi)
Apogee altitude2,978 km (1,850 mi)
Inclination79.80°
Period121.40 minutes
Instruments
Cylindrical Electrostatic Probes
Electron Temperature
Energetic Electron Current Monitor
Ion Mass Spectrometer
Magnetic Ion-Mass Spectrometer
Thermal Electron Probe
Thermal Ion Probe
Explorer program
 

Explorer 31, also called DME-A, was a NASA satellite launched as part of the Explorer program. Explorer 31 was launched on 29 November 1965 from Vandenberg Air Force Base, California, with a Thor-Agena launch vehicle. Explorer 31 was released along with the Canadian satellite Alouette 2.[3]

Explorer 31 was a small ionospheric observatory instrumented to make direct measurements of selected ionospheric parameters at the spacecraft. Since the spacecraft had no tape recorder, data could be observed at the spacecraft only when the spacecraft was in sight of the telemetry station and when commanded on. Experiments were operated either simultaneously or sequentially, as desired. The satellite was spin-stabilized with the spin axis perpendicular to the orbit plane. The spin rate and spin axis were controlled by an onboard magnetic torquing system. The attitude and spin rate information were observed by a sun sensor and a three-axis magnetometer.[3]

Satellite performance was satisfactory except for a partial power failure in May 1966, which reduced data acquisition time to about half the nominal amount. Some difficulties were encountered in obtaining attitude information that was necessary for the reduction of the experiment observations. On July 1, 1969, the satellite data observations were terminated with five of the seven experiments operating. Responsibility for standby monitoring of the satellite was given to the ESSA telemetry station at Boulder, Colorado, on July 8, 1969. During this standby operation, experiment data were collected only once on 1 October 1969, for 9 minutes from the electrostatic probe for use in studying a red arc event. On January 15, 1971, no response was received from a variety of satellite commands, and the satellite was abandoned.[3]

Instruments

  • Cylindrical Electrostatic Probes
  • Electron Temperature
  • Energetic Electron Current Monitor
  • Ion Mass Spectrometer
  • Magnetic Ion-Mass Spectrometer
  • Thermal Electron Probe
  • Thermal Ion Probe

Experiments

Cylindrical Electrostatic Probes

The cylindrical electrostatic probes were used to measure electron temperature and density in the ionosphere. Each sensor was basically a Langmuir probe consisting of a collector electrode extending from the central axis of a cylindrical guard ring. The guard rings extended 23 cm (9.1 in) from the spacecraft and the collector electrode extended 46 cm (18 in). The two sensors were mounted on opposite sides of the spacecraft, and were perpendicular to the spin axis and in the orbit plane. Data sets are no longer available from this experiment.[4]

See also

References

  1. ^ "Launch Log". Jonathan's Space Report. 21 July 2021. Retrieved 9 November 2021.
  2. ^ "Trajectory: Explorer 31 (DME-A) 1965-098B". NASA. 28 October 2021. Retrieved 9 November 2021. Public Domain This article incorporates text from this source, which is in the public domain.
  3. ^ a b c "Display: Explorer 31 (DME-A) 1965-098B". NASA. 28 October 2021. Retrieved 9 November 2021. Public Domain This article incorporates text from this source, which is in the public domain.
  4. ^ . NASA. 28 October 2021 https://nssdc.gsfc.nasa.gov/nmc/experiment/display.action?id=1965-098B-02. Retrieved 9 November 2021. {{cite web}}: Missing or empty |title= (help); Text "Experiment: Cylindrical Electrostatic Probes" ignored (help) Public Domain This article incorporates text from this source, which is in the public domain.