Direct hangers

This article was entered on the quality assurance page of the Wiki project Planning and Building . This is done in order to bring the quality of the articles from the areas of construction technology, architecture and planning to an acceptable level. Articles that cannot be significantly improved may be included in the general deletion discussion. Help to eliminate the shortcomings in this article and take part in the discussion !

A suspended ceiling. Some direct hangers are visible between the ceiling (above) and the lightweight ceiling (below)

Direct hangers are components from interior construction.

The device is used to attach a suspended ceiling . This is used when an additional lower ceiling is to be attached to a room, e.g. B. to adapt the room optically, to hide installations or to improve the room acoustics .

The direct hangers are attached to the top of the raw ceiling and hold the supporting structure of the suspended ceiling at the bottom without the need for an additional substructure.