Joining bracket

from Wikipedia, the free encyclopedia
Joining frames with clamped workpiece

The joining frame is a frame in which the boards to be processed are clamped on the long edge.

The joining frame consists of two vertical wooden columns connected at the bottom by a foot and halfway up by a cross piece. In its upper fork-shaped opening, the board to be processed is placed on the high edge. With a wedge or screw, it is clamped so that the top edge protrudes.

Two joining frames are always used at the same time, which are set up at the distance from each other determined by the length of the boards. By below the cross pieces mounted hallway the blocks can lead to a joining load are connected together.

See also

Individual evidence

  1. ↑ joining bracket . In: Lueger's lexicon of all technology . 2nd Edition. Volume 4, Deutsche Verlags-Anstalt, Leipzig / Stuttgart 1906, p.  203 .
  2. ↑ joining bracket . In: Brockhaus Konversations-Lexikon 1894–1896, 7th volume, pp. 403–404.
  3. ↑ joining bracket . In: Meyers Konversations-Lexikon . 4th edition. Volume 7, Verlag des Bibliographisches Institut, Leipzig / Vienna 1885–1892, p. 194.