Fügelade

Fastening drawer with clamped workpiece

A joiner is a device that is no longer used in modern carpentry shops for planing and joining the long edges of boards at right angles .

A joint drawer consists of two joining blocks and a board that connects them. The trestles are set up at the distance determined by the length of the boards to be processed. The workpieces are clamped into the frames from above so that the edge to be machined protrudes upwards.

A fender for processing thin, difficult to clamp workpieces and veneers provides a support for the plane, which is guided on its cheek . It consists of a board attached to the workbench , the guide. On top of this, usually screwed, is another board set back by the width of the workpiece in order to secure the workpiece from being moved. At the end of this board there is usually a stopper wood, which prevents the plane from pulling the workpiece in the planing direction.

Individual evidence

1. ↑ Fügelade . In: Lueger's lexicon of all technology . 2nd Edition. Volume 4, Deutsche Verlags-Anstalt, Leipzig / Stuttgart 1906, p.  203 .
2. ↑ Fügelade . In: Meyers Konversations-Lexikon . 4th edition. Volume 7, Verlag des Bibliographisches Institut, Leipzig / Vienna 1885–1892, p. 194.
3. ↑ Fügelade in the Google book search