Georg Jacobs

from Wikipedia, the free encyclopedia

Georg Jacobs (born July 20, 1962 in Bensberg ) is a German professor of mechanical engineering at RWTH Aachen University . He heads the Institute for Machine Elements and System Development (MSE). Since 2013, his responsibility as institute director has also extended to the newly founded Chair for Wind Power Drives at RWTH Aachen University. As spokesman for the board, he also works for the university's newly established Center for Wind Power Drives (CWD).

Live and act

Georg Jacobs studied mechanical engineering with a specialization in construction technology at RWTH Aachen University from 1983 to 1989. From 1989 to 1993 he worked as a research assistant at the Institute for Fluid Power Drives and Controls - IFAS formerly IHP, RWTH Aachen University. In 1993 he received the academic degree of Doctor of Engineering and was awarded the Borchers plaque from RWTH Aachen University. As chief engineer, he was a member of the institute's management from 1993 to 1996.

From 1996 to 1997, Professor Jacobs worked as the head of the development department for large presses and systems at Müller Weingarten AG, Weingarten. In 1997 he joined what was then Mannesmann Rexroth AG, where he headed technical sales in the industrial hydraulics division until 2001. Between 2001 and 2004 he was Technical Director of Brueninghaus Hydromatik GmbH in Ulm, a Bosch Rexroth AG company. As spokesman for the Drives product division within the Hydraulics division of Bosch Rexroth AG, he worked from 2005 to 2008 with particular responsibility for development and product management. Between 2006 and 2008, as a member of the Bosch Rexroth Hydraulics management team, he took over the development segment and the drives product area with particular responsibility.

In October 2008 Georg Jacobs was appointed to RWTH Aachen University. As before in industry, his research and development work at RWTH Aachen University focuses on drive technology and product development, particularly in the field of wind turbines and construction and agricultural machinery.

From 2012 to 2014 Georg Jacobs was Vice Dean for Structure and from 2014 to 2016 Dean of the Faculty of Mechanical Engineering at RWTH Aachen University. He introduced the position of full-time dean, to whom he then handed over his duties in the dean's office.

Georg Jacobs has been Professor and Institute Director at the Chair for Wind Power Drives at RWTH Aachen University and spokesman for the Board of Directors of the Center for Wind Power Drives (CWD), which he founded with six other colleagues, since 2013. The Center for Wind Power Drives (CWD) bundles research and development work on the subject of drive technology for wind turbines (WEA) at RWTH. At the beginning of 2016, Georg Jacobs also took over the management of the Institute for General Construction Technology in Mechanical Engineering (ikt) in order to more closely link the simulation models of drive design with the methods and processes of product development .

Memberships

Georg Jacobs has been a member of the Association of German Engineers since 1989 and a member of the Scientific Society for Product Development e. V. He is also a member of the technical and scientific advisory board of the journal "O + P" (since 2011), the editorial board of the journal "Friction" (since 2013), the advisory board of the State Key Laboratory for Tribology, China (since 2014) and on the scientific advisory board of Jenoptik AG (since 2016).

Publications

Editorships and conference management

Georg Jacobs has been the scientific director of the "Drive Technology Colloquium" (ATK) conference and editor of the accompanying proceedings since 2008. Since 2010 he has been the scientific director of the VDI conference “Drive Systems” and since 2013 the scientific director of the VDI specialist conference “Damage Mechanisms in Bearings”. Also since 2013, in his function as a member of the board of the Center for Wind Power Drives, he has been leading the “Conference for Wind Power Drives” (CWD) and is co-editor of the accompanying proceedings.

Selected scientific publications

  • Achim Feldermann, Stephan Neumann, Georg Jacobs: CFD simulation of elastohydrodynamic lubrication problems with reduced order models for fluid-structure interaction. In: Tribology - Materials, Surfaces & Interfaces , 2017, ISSN  1751-584X , pp. 1–9, doi: 10.1080 / 17515831.2017.1279846
  • Joerg Berroth, Georg Jacobs, Tobias Kroll, Ralf Schelenz: Investigation on pitch system loads by means of an integral multi body simulation approach . In: Journal of Physics. Conference Series. Vol. 753, article no. 112002, 2016, ISSN  1742-6596 , doi: 10.1088 / 1742-6596 / 753/11/112002
  • Dennis Bosse, Georg Jacobs: Capabilities of wind turbine ground test facilities. Benefits from standardizing test methods of blade and nacelle test center around the world . In: Journal of fundamentals of renewable energy and applications. Vol. 6, Iss. 4, 2016, ISSN  2090-4541 , p. 28, doi: 10.4172 / 2090-4541.C1.011
  • Christopher Sous, Henrik Wünsch, Georg Jacobs, Christoph Broeckmann: Prediction of fatigue limit of journal bearings considering a multi-axial stress state . In: Industrial lubrication & tribology. Vol. 68, Iss. 3, 2016, Emerald, ISSN  0036-8792 , pp. 430-438, doi: 10.1108 / ILT-08-2015-0119
  • Andrew Flórez, Gero Burghardt, Georg Jacobs: Influencing factors for static immersion tests of compatibility between elastomeric materials and lubricants . In: Polymer testing. Vol. 49, 2016, Elsevier, ISSN  0142-9418 , pp. 8-14, doi: 10.1016 / j.polymertesting.2015.10.017
  • Gero Burghardt, Florian Wächter, Georg Jacobs, Christoph Hentschke: Influence of run-in procedures and thermal surface treatment on the anti-wear performance of additive-free lubricant oils in rolling bearings . In: Wear. Vols. 328–329, 2015, Elsevier, ISSN  0043-1648 , pp. 309-317, doi: 10.1016 / j.wear.2015.02.008
  • Christopher Körtgen, Gabriele Morandi, Georg Jacobs, Felix Straßburger: Automated parameterization of the transmission control of a power- split transmission . In: Drive Technology Colloquium (ATK): Aachen, Germany, March 3rd – 4th, 2015
  • Moritz Ploß, Christian Bongardt, Gero Burghardt, Georg Jacobs: White Etching Cracks (WEC) on rolling bearings. Appearances, mechanisms of origin and damage reproduction . In: Drive Technology Colloquium (ATK): Aachen, Germany, March 3rd – 4th, 2015
  • Jan Schröter, Georg Jacobs, Svetlana Zhitkova, Matthias Felden, Kay Hameyer: Development of High Speed ​​Electrical Drives for Mobile Machinery. Challenges and Potential Solutions . In: 9th International Fluid Power Conference (IFK): Aachen, Germany, March 24th – 26th, 2014, Vol. 3, pp. 416-427, pdf
  • Georg Jacobs: Energy-efficient drives for construction and agricultural machinery . In: ATZoffhighway. Vol. 6, Iss. 1, 2013, Springer, ISSN  2191-1843 , pp. 50-58
  • Dennis Bosse, Dominik Radner, Ralf Schelenz, Georg Jacobs: Analysis and Application of Hardware in the Loop Wind Loads for full Scale Nacelle Ground Testing . In: DEWI magazine. 43, 2013, ISSN  0946-1787 , pp. 65-70, pdf
  • Andreas Stratmann, Christoph Hentschke, Georg Jacobs: Formation of Anti-Wear Films in Rolling Bearings due to Run-in Procedures . In: 5th World Tribology Congress (WTC): Torino, Italy, September 8th – 13th, 2013, [1]
  • Sebastian Neubert, Artur Porat, Christoph Hentschke, Georg Jacobs: Mixed friction model for rough contacts at high pressure . In: Proceedings of the Institution of Mechanical Engineer, Part J: Journal of engineering tribology. Vol. 227, Iss. 5, 2013, ISSN  1350-6501 , pp. 496-509, doi: 10.1177 / 1350650113479512
  • Simon Serowy, Cristian Andrei, Friederike Barenhorst, Ralf Schelenz, Kay Hameyer, Georg Jacobs: Multi-Megawatt Wind Turbine with Multiple High-speed Generators. In: Proceedings of DEWEK 2015: Bremen, Germany, May 19th – 20th, 2015
  • Christian Liewen, Dominik Radner, Dennis Bosse, Ralf Schelenz, Georg Jacobs: New infrastructure and test procedures for analyzing the effects of wind and grid loads on the local loads of wind turbine drivetrain components . In: Proceedings of DEWEK 2015: Bremen, Germany, May 19th – 20th, 2015
  • Stefan Franzen, Dennis Bosse, Dominik Radner, Georg Jacobs, Ralf Schelenz: Hardware in the Loop for Nacelle Test Benches . In: Windtech international. 2015, pp. 20-23
  • Alexander Helmedag, Timo Isermann, Uwe Jassmann, Dominik Radner, Dirk Abel, Georg Jacobs, Antonello Monti: Testing nacelles of wind turbines with a hardware in the loop test bench . In: Instrumentation & measurement. Vol. 17, Iss. 5, 2014, ISSN  1094-6969 , pp. 26-33, doi: 10.1109 / MIM.2014.6912198

Web links

Individual evidence

  1. ^ Profile of Georg Jacobs on the RWTH Aachen University website. Retrieved March 9, 2017 .
  2. ^ Georg Jacobs' curriculum vitae on the website of the Institute for Machine Elements. Retrieved March 9, 2017 .
  3. ↑ Research projects of the Center for Wind Power Drives. Retrieved March 10, 2017 .
  4. ^ Research in the off-highway area at the IME. Retrieved March 10, 2017 (English).
  5. ↑ Teaching at the Chair for Wind Power Drives. Retrieved March 15, 2017 .
  6. ↑ Research at the Institute for General Construction Technology in Mechanical Engineering, RWTH Aachen. Retrieved March 15, 2017 .
  7. ↑ The members of WiGeP. Retrieved March 16, 2017 .
  8. ↑ Scientific and technical advisory board of O + P. Retrieved March 16, 2017 .
  9. ^ Editorial board of the journal Friction. Retrieved March 16, 2017 .
  10. ↑ Conference management of the drive technology colloquium. Retrieved March 16, 2017 .
  11. ↑ Proceedings of the Drive Technology Colloquium 2017. Accessed on March 16, 2017 (English).
  12. ↑ Head of the VDI conference "Drive Systems". Retrieved March 16, 2017 .
  13. ↑ Head of the VDI conference "Damage Mechanisms in Camps". Retrieved March 16, 2017 .
  14. ^ Conference management of the Conference for Wind Power Drives. Retrieved March 16, 2017 .
personal data
SURNAME Jacobs, Georg
BRIEF DESCRIPTION German mechanical engineer
DATE OF BIRTH July 20, 1962
PLACE OF BIRTH Bensberg