List of standards DIN 4500 to DIN 4999

Logo of the German Institute for Standardization

The list of standards DIN 4500 to DIN 4999 lists all current standards and many historical standard editions in the number range 4500 to 4999.

DIN - German Institute for Standardization e. V. - is the national standardization organization of the Federal Republic of Germany based in Berlin .

Explanations of the list

• DIN-EN standards, DIN-EN-ISO standards, DIN-ISO standards, preliminary standards and draft standards are not listed in this list.
• The term “sheet” used in older standard editions has been uniformly transferred to “part”.
• The date of issue is indicated next to the standard number. Edition 9.1981 means that the standard was published in September 1981.
• Cross edition: If the date of issue is appended with an x, for example edition 9.1949x, the standard has only been changed slightly and remains valid.
• Unless otherwise noted, the withdrawal date of an old standard is the same as the issue date of the replacing standard (s).
• The entry "→ current" means that the standard is currently (as of June 2017) valid.

DIN 4503 - Part 1 Edition 10.1993 → withdrawn without replacement

Tripod connections for cameras and accessories · Screw connections

The use of ISO 1222 Edition 6.2010 is recommended

DIN 4503 - Part 2 Edition 10.1993 → withdrawn

Tripod connections for cameras and accessories · Connection elements for quick attachments

DIN 4503 edition 1.1981 → replaced by DIN 4503 part 1 edition 10.1993

Photographic cameras and accessories · Tripod connections

DIN 4506 - Part 1 · Edition 5.1988 → replaced by DIN ISO 1008 Edition 6.2000

Photographic Papers · General Purpose Sheet Papers · Dimensions and Delivery Method

DIN 4506 - Part 1 · Edition 3.1979 → replaced by Edition 5.1988

Photographic papers · Leaf papers for general purposes · Dimensions and delivery method

DIN 4506 - Part 2 Edition 10.1976 → replaced by DIN ISO 1009 Edition 6.1993

Photographic Papers · Roll paper for copier machines for general purposes · Dimensions and delivery method

DIN 4510 - Part 1 · Edition 6.1983 → current

Image sizes and copy masks in still photography on film no.110, film no.126 and film no.135

DIN 4510 - Part 1 edition 1.1970 → replaced by edition 6.1983 and DIN 4510 Part 2 edition 2.1981

Image sizes and copy masks in still photography, 16 mm on film and 35 mm on film

DIN 4510 - Part 2 Edition 9.1992 → current

Image sizes and copy masks in still photography on roll films No. 120, No. 220 and film 70 mm

DIN 4510 - Part 2 · Edition 2.1981 → replaced by Edition 9.1992

Image sizes and copy masks in still photography on roll films No. 127, No. 120, No. 220 and film 70 mm

DIN 4510 - Part 3 · Edition 10.1985 → current

Image sizes and copy masks in still photography on sheet film

DIN 4510 - Part 3 · Edition 1.1971 → replaced by Edition 10.1985

Image sizes and copy masks in still photography, on sheet film

DIN 4510 - Part 4 Edition 2.1981 → replaced by DIN ISO 897 Edition 2.1993

Image sizes and copy masks in still photography · Identification of the layer side of roll films, 35 mm film and 16 mm film

DIN 4512 - Part 1 · Edition 5.1993 → replaced by DIN ISO 6 Edition 2.1996

Photographic sensitometry · Systems of black and white negative films and their processing for taking still pictures · Determination of light sensitivity

DIN 4512 - Part 1 · Edition 4.1971 → replaced by Edition 5.1993

Photographic sensitometry · Determination of the light sensitivity of black and white negative material for pictorial recordings

DIN 4512 - part 3 edition 1.1973 → replaced by DIN 4512 parts 7, 8 and 9 edition 1.1993

Photographic sensitometry · Determination of the optical density of transparent scattering layers

DIN 4512 - Part 4 Edition 8.1985 → replaced by DIN ISO 2240 Edition 6.1998

Photographic sensitometry · Determination of the photosensitivity of color reversal films

DIN 4512 - Part 4 · Edition 6.1977 → replaced by Edition 8.1985

Photographic sensitometry · Determination of the photosensitivity of color reversal films

DIN 4512 - Part 5 Edition 11.1990 → replaced by DIN ISO 5800 Edition 6.1998

Photographic sensitometry; Determination of the light sensitivity of color negative films

DIN 4512 - part 5 edition 10.1977 → replaced by edition 11.1990

Photographic sensitometry; Determination of the light sensitivity of color negative films

DIN 4512 - Part 6 Edition 12.1988 → withdrawn

Photographic sensitometry · Sensitometric types of light and light sources

DIN 4512 - Part 6 Edition 7.1980 → replaced by Edition 12.1988

Photographic sensitometry · Sensitometric types of light and light sources

DIN 4512 - Part 7 Edition 1.1993 → current

Photographic sensitometry · Determination of optical density · Terms, symbols and labels

DIN 4512 - Part 8 Edition 1.1993 → current

Photographic sensitometry · Determination of optical density · Geometric conditions for measurements in transmission

DIN 4512 - Part 9 Edition 1.1993 → current

Photographic sensitometry · Determination of optical density · Spectral conditions

DIN 4512 - Part 10 Edition 1.1993 → current

Photographic sensitometry · Determination of optical density · Geometric conditions for measurements in the case of reflection

DIN 4513 · Edition 10.1981 → withdrawn

Films (in rolls) for use in photo typesetting apparatus

DIN 4514 · Edition 6.1989 → withdrawn

Radiation sensitive papers for phototypesetting machines in roll form

DIN 4515 edition 10.1981 → replaced by DIN ISO 1012 edition 11.1994

Film in sheet form for pictorial recording · Dimensions and package sizes

DIN 4516 · Edition 6.1989 → withdrawn

Radiation-sensitive papers for recording apparatus in roll form

DIN 4516 edition 12.1976 → replaced by edition 6.1989

Radiation-sensitive papers for recording apparatus, in roll form

DIN 4517 · Edition 5.1989 → withdrawn

Radiation-sensitive films in sheet and roll form for reproduction technology and photofabrication · Dimensions and pack sizes

DIN 4518 - Part 1 · Edition 7.1988 → current

Radiation-sensitive materials for reprography and micrography · Silver halide materials · Dimensions

DIN 4518 - Part 1 · Edition 12.1974 → replaced by Edition 7.1988

Radiation-sensitive materials for reprography · Dimensions, silver halide materials

DIN 4518 - Part 2 · Edition 7.1988 → current

Radiation-sensitive materials for reprography and micrography · Diazo materials · Dimensions

DIN 4518 - Part 2 · Edition 5.1978 → replaced by Edition 7.1988

Radiation-sensitive materials for reprography · Dimensions, diazo materials

DIN 4518 - Part 3 · Edition 12.1974 → withdrawn

Radiation-sensitive materials for reprography · Dimensions, semiconductor papers

DIN 4518 - part 4 edition 12.1974 → replaced by DIN 4518 part 1 edition 7.1988

Radiation-sensitive materials for reprography Dimensions, contact diffusion materials (silver halide)

DIN 4521 edition 1.1973 → replaced by DIN ISO 517 edition 7.2002

Recording and projection lenses · Focal length, relative aperture

DIN 4522 - Part 1 edition 3.1991 → replaced by DIN ISO 517 edition 7.2002

Taking lenses · F-stops and limits

DIN 4522 - Part 1 · Edition 1.1973 → replaced by Edition 3.1991 and DIN 4522 Part 11 Edition 3.1991

Photo lenses · Apertures, lettering, distance information

DIN 4522 - Part 2 Edition 10.1970 → replaced by DIN 4522 Part 1 Edition 3.1991

Taking lenses · permissible aperture limits

DIN 4522 - Part 3 · Edition 1.1991 → withdrawn

Recording lenses Exposure-correct f-number (e-number)

The application of ISO 517 edition 3.2008 is recommended

DIN 4522 - Part 3 · Edition 2.1975 → replaced by Edition 1.1991

Photo lenses · F-number suitable for transmission

DIN 4522 - Part 4 · Edition 4.1993 → current

Taking lenses · Measurement of the spectral transmittance

DIN 4522 - Part 4 Edition 5.1975 → replaced by Edition 4.1993

Taking lenses · Measurement of the spectral transmittance

DIN 4522 - Part 5 · Edition 5.1991 → current

Photo lenses · Influence of lenses on color rendering of color films · Terms and color rendering indexes

DIN 4522 - Part 5 · Edition 4.1982 → replaced by Edition 5.1991

Photo lenses · Influence of lenses on color rendering of color films · Terms and color rendering indexes

DIN 4522 - Part 6 · Edition 5.1991 → current

Taking lenses · Influence of the lenses on the color rendering of color films · Recommended values ​​for the color rendering indexes

DIN 4522 - Part 6 Edition 4.1982 → replaced by Edition 5.1991

Taking lenses · Influence of the lenses on the color rendering of color films · Recommended values ​​for the color rendering indexes

DIN 4522 - Part 7 · Edition 6.2015 → current

Photo lenses · Identification of the imaging properties of photographic lenses

DIN 4522 - Part 7 Edition 4.1991 → replaced by Edition 6.2015

Photo lenses · Identification of the imaging properties of photographic lenses

DIN 4522 - Part 11 · Edition 6.2015 → current

Photo lenses · Labeling and preferred values

DIN 4522 - Part 11 Edition 3.1991 → replaced by Edition 6.2015

Photo lenses · Labeling and preferred values

DIN 4523 - Part 1 Edition 10.1981 → replaced by DIN ISO 732 Edition 11.1994

Roll films No. 120 and No. 220 (film width 60 mm) · Roll film No. 120 · Film strips, paper strips, dimensions

DIN 4523 - part 2 edition 10.1981 → replaced by DIN ISO 732 edition 11.1994

Roll films No. 120 and No. 220 (film width 60 mm) · Roll film No. 220 · Film strips, paper leader and trailer, dimensions

DIN 4526 edition 1.1979 → withdrawn

Number window for roll film cameras · Position and dimensions

The use of ISO 1203 edition 10.1998 is recommended

DIN 4527 - Part 1 Issue 9.1980 → withdrawn

Cassette film no. 126 · Camera cassette for cassette film no. 126 · Connection dimensions to the camera, spool

DIN 4527 - Part 2 Edition 9.1980 → withdrawn

Cassette film No. 126 · Camera cassette for cassette film No. 126 · Dimensions and position of the indexing grooves for film sensitivity and film identification

DIN 4527 - Part 3 Issue 9.1980 → withdrawn

Cassette film # 126 · Film and paper strips

DIN 4528 - Part 1 · Edition 1.1984 → withdrawn

Cassette film No. 110 · Camera cassette for cassette film No. 110 · Connection dimensions to the camera

The use of ISO 13450 edition 5.1996 is recommended

DIN 4528 - Part 2 · Edition 1.1984 → withdrawn

Cassette film No. 110 · Camera cassette for cassette film No. 110 · Dimensions and position of the switch bars for film sensitivity and the switch grooves for film identification

The use of ISO 13450 edition 5.1996 is recommended

DIN 4528 - Part 3 · Edition 1.1984 → withdrawn

Cassette film # 110 · Film strips and paper strips

The use of ISO 13450 edition 5.1996 is recommended

DIN 4529 edition 7.1981 → withdrawn

Spool No. 120 for roll film No. 120 and No. 220 dimensions

DIN 4531 edition 4.1982 → current

Stereoscopy (spatial images) · Nominal sizes, external sizes, fields, frame spacing, field arrangement, labeling

DIN 4532 edition 2.1981 → withdrawn

Processing clamps for strip-shaped photographic films

DIN 4535 - Part 1 · Edition 6.1978 → withdrawn

Cartridge for film No. 135 (35 mm) · Capsule with spool, dimensions

DIN 4535 - Part 2 Edition 11.1977 → withdrawn

Cartridge for film No. 135 (35 mm) · Gauge for capsule outline and film extraction force

DIN 4535 - Part 3 Edition 9.1981 → withdrawn

Cartridge for film No. 135 (35 mm) · Inscription field for film name · Number of pictures and film speed

DIN 4536 · Edition 10.1981 → withdrawn

Film No. 135 (35 mm) for cartridge · Dimensions, edge marking

DIN 4543 - Part 1 Edition 9.1994 → current

Office workplaces · Areas for the installation and use of office furniture · Safety requirements, testing

DIN 4544 Edition 3.1976 → current

File boxes with and without lids · Card formats, clear dimensions of the file boxes

DIN 4545 edition 2.1983 → replaced by DIN EN 14073 part 2 edition 11.2004

Office furniture · Filing and file cabinets on a plinth · External dimensions

DIN 4547 - Part 1 · Edition 4.2012 → current

Lockers and lockers made of steel · Shapes, dimensions, designation, material

DIN 4547 - Part 2 · Edition 4.2012 → current

Steel cloakroom and lockers · Requirements for function and safety and their testing

DIN 4547 edition 1.1973 → replaced by DIN 4547 parts 1 and 2 editions 4.2012

Steel wardrobes

DIN 4548 edition 10.2016 → current

Factory and workshop cabinets made of steel · Types, functional and safety requirements, tests, evaluation

DIN 4548 edition 1.1973 → replaced by edition 10.2016

Steel workshop cabinets

DIN 4549 edition 11.1982 → replaced by DIN EN 527 part 1 edition 7.2000

Office furniture · Desks, office machine tables and computer work tables · Dimensions

DIN 4550 · Edition 12.2004 → current

Office furniture · Self-supporting seat height adjustment elements with energy storage for office work chairs · Safety requirements, testing

DIN 4550 edition 5.1992 → replaced by edition 12.2004

Office furniture · Self-supporting seat height adjustment elements with energy storage for swivel chairs and swivel armchairs · Safety requirements and testing

DIN 4551 · edition 6.1988 → replaced by DIN EN ISO 9241 part 5 edition 8.1999 and DIN EN 1335 parts 1, 2 and 3 edition 8.2002

Office furniture · Office swivel chairs and office swivel chairs · Safety requirements, testing

DIN 4551 edition 10.1975 → replaced by edition 6.1988

Office furniture · Office swivel chair with adjustable backrest, with or without armrests, height adjustable

DIN 4552 edition 10.1975 → replaced by DIN 4551 edition 6.1988

Office furniture · Swivel chair with non-height adjustable backrest, with or without armrests, height adjustable

DIN 4553 edition 11.1986 → withdrawn

Office furniture · Terms

DIN 4554 edition 12.1986 → replaced by DIN EN 527 part 2 edition 1.2003, DIN EN 527 part 3 edition 6.2003, DIN EN 14073 parts 2 and 3 edition 11.2004 and DIN EN 14074 edition 11.2004

Office furniture (except office seating) · Requirements and testing

In June 2006, the DIN technical report 147 was published, which contains specifications that are not regulated in the European standards, but in this standard.

DIN 4556 Edition 2.1983 → current

Office furniture · Footrests for the office workplace · Requirements, dimensions

DIN 4565 - Part 1 edition 10.1977 → replaced by DIN 4568 parts 1 and 2 edition 11.1985

Wooden ladders and steps · Step ladders and steps

DIN 4565 - part 2 edition 3.1971 → replaced by DIN 4568 parts 1 and 2 edition 11.1985

Ladders and steps made of wood · Ladders with square bars

DIN 4565 - Part 3 edition 3.1971 → replaced by DIN 4568 parts 1 and 2 edition 11.1985

Ladders and steps made of wood · rung ladders with semicircular stiles

DIN 4566 edition 3.1963 → replaced by DIN 4568 parts 1 and 2 edition 11.1985

Ladders and steps of metal

DIN 4567 edition 8.1998 → current

Ladders · Assessment bases for ladders for special professional use

DIN 4567 edition 3.1986 → replaced by edition 8.1998

Ladders · Assessment bases for ladders for special professional use

DIN 4567 · edition 5.1978 → replaced by edition 3.1986 and DIN 4568 parts 1 and 2 edition 11.1985

Assessment bases for ladders

DIN 4568 - part 1 edition 11.1985 → replaced by DIN EN 131 part 1 edition 4.1993

Ladders · Terms, types, functional dimensions

DIN 4568 - part 2 edition 11.1988 → replaced by DIN EN 131 part 2 edition 4.1993

Ladders · Requirements, testing

DIN 4568 - part 2 edition 11.1985 → replaced by edition 11.1988

Ladders · Requirements, testing

DIN 4569 edition 7.1997 → replaced by DIN EN 14183 edition 3.2004

Steps · Terms, functional dimensions, requirements, testing

DIN 4569 · Edition 1.1996 → replaced by Edition 7.1997

Steps · Terms, functional dimensions, requirements, testing

DIN 4569 edition 11.1988 → replaced by edition 1.1996

Steps · Terms, functional dimensions, requirements, testing

DIN 4570 edition 9.1998 → replaced by DIN EN 14975 edition 3.2007

Movable attic stairs · Safety requirements and testing

DIN 4620 edition 11.1992 → replaced by DIN EN 10092 part 1 edition 1.2004

Spring steel, hot-rolled, with rounded narrow sides for leaf springs · Dimensions, tolerances, weights, static values

DIN 4620 edition 4.1954 → replaced by edition 11.1992

Spring steel, hot rolled, for layered leaf springs

DIN 4621 edition 12.1995 → current

Layered leaf springs · spring clips

DIN 4621 edition 11.1982 → replaced by edition 12.1995

Layered leaf springs · spring clips

DIN 4626 edition 2.1986 → current

Layered leaf springs · spring bolts

DIN 4626 edition 6.1977 → replaced by edition 2.1986

Layered leaf springs · spring bolts

DIN 4646 - Part 1 · Edition 3.1983 → replaced by DIN EN 166 Edition 9.1995

Sight glasses for eye protection devices · Basics, requirements, dimensions, labeling

DIN 4646 - Part 1 · Edition 3.1979 → replaced by Edition 3.1983

Sight glasses for eye protection devices · Basics, requirements, dimensions, labeling

DIN 4646 - Part 1 · Edition 10.1977 → replaced by Edition 3.1979

Sight glasses for eye protection devices · Basics, requirements, dimensions, labeling

DIN 4646 - Part 2 edition 12.1975 → replaced by DIN EN 167 edition 11.1995

Sight glasses for eye protection devices · Optical test methods

DIN 4646 - Part 3 · Edition 2.1976 → replaced by DIN EN 168 Edition 11.1995

Viewing panes for eye protection devices · Falling ball test on safety viewing panes

DIN 4646 - Part 4 Edition 2.1976 → replaced by DIN EN 168 Edition 11.1995

Sight glasses for eye protection devices · Test for gas tightness after mechanical stress

DIN 4646 - Part 5 · Edition 2.1976 → replaced by DIN EN 168 Edition 11.1995

Sight glasses for eye protection devices · Test for resistance to glowing bodies, UV radiation as well as chemical and thermal effects

DIN 4646 - Part 6 Edition 2.1976 → replaced by DIN EN 168 Edition 11.1995

Viewing panes for eye protection devices · Attempted fire on safety viewing panes

DIN 4646 - Part 7 Edition 2.1976 → replaced by DIN EN 168 Edition 11.1995

Sight glasses for eye protection devices · Testing of behavior in contact with metal splashes

DIN 4646 - Part 8 Edition 9.1986 → replaced by DIN EN 168 Edition 11.1995

Sight glasses for eye protection devices · Check for freedom from fogging

DIN 4647 - Part 1 Edition 2.1977 → replaced by DIN EN 169 Edition 12.1992

Sight glasses for eye protection devices · Welding protection filters

DIN 4647 - Part 2 Edition 9.1977 → replaced by DIN EN 170 Edition 12.1992

Glasses for eye protection devices Protective filter against ultraviolet radiation (UV protective filter)

DIN 4647 - Part 3 · Edition 2.1977 → replaced by DIN EN 171 Edition 12.1992

Sight glasses for eye protection devices Protective filter against infrared radiation (IR protective filter)

DIN 4647 - Part 4 Edition 6.1980 → replaced by DIN EN 172 Edition 2.1995

Sight glasses for eye protection devices · Protective filters against solar radiation (sun protection filters), safety requirements

DIN 4647 - Part 5 Edition 9.1977 → withdrawn

Viewing panes for eye protection devices · Safety viewing panes without filter effect

DIN 4647 - Part 6 Edition 2.1977 → withdrawn

Sight glasses for eye protection devices · Front glasses

DIN 4647 - Part 7 Edition 10.1982 → replaced by DIN EN 379 Edition 6.1994

Viewing panes for eye protection devices · Electrically controllable viewing windows and welding protection filters · Safety requirements and testing

DIN 4647 - Part 8 Edition 10.1982 → withdrawn

Sight glasses for eye protection devices · Bulletproof safety sight glasses · Safety requirements and testing

DIN 4661 - Part 1 Issue 9.1968 → withdrawn

Pressurized gas cylinders · Welded steel cylinders, cylinders, test pressure 30 atm

DIN 4661 - Part 2 Edition 9.1968 → withdrawn

Pressurized gas cylinders · Welded steel cylinders, approved gases

DIN 4661 - Part 3 · Edition 9.1968 → withdrawn

Pressurized gas cylinders · Welded steel cylinders, bottom shapes

DIN 4661 - Part 4 Edition 9.1968 → withdrawn

Pressurized gas cylinders · Welded steel cylinders, valve sleeves

DIN 4661 - Part 5 Edition 9.1968 → withdrawn

Pressurized gas cylinders · Welded steel cylinders, feet

DIN 4661 - Part 6 Edition 9.1968 → replaced by DIN 4664 Edition 8.1989

Pressurized gas cylinders · Welded steel cylinders, valve protection

DIN 4661 - Part 7 Issue 3.1978 → withdrawn

Pressurized gas cylinders · Welded steel cylinders, labeling, signs, sign frames, sealing rivets

DIN 4661 edition 9.1954 → replaced by DIN 4661 part 1 edition 9.1968

Welded steel cylinders for propane / butane (liquid gas), 1 to 11 kg filling

DIN 4661 edition 1.1944 → replaced by edition 9.1954

Steel bottles for liquid gas · test pressure 25 and 45 kg / cm²

DIN 4661 edition 2.1942 → replaced by edition 1.1944

Steel bottles for liquid gas · test pressure 25 and 45 kg / cm²

DIN 4662 edition 9.1954 → replaced by DIN 4661 part 1 edition 9.1968

Welded steel cylinders for propane / butane (liquid gas), 22 and 33 kg filling

DIN 4663 edition 12.1988 → withdrawn

Pressurized gas cylinders · Seamless cylinders made of aluminum alloys · Test pressure 250 bar and 300 bar

DIN 4664 edition 8.1989 → withdrawn without replacement

Pressurized gas cylinders · Seamless steel cylinders

The use of DIN EN 1964 part 1 edition 3.1999, DIN EN 1964 part 2 edition 2.2002 and DIN EN 1964 part 3 edition 4.2000 is recommended.

DIN 4664 - Part 1 · Edition 6.1969 → replaced by DIN 4664 Edition 8.1989

Pressurized gas cylinders · Seamless steel cylinders, overview, permitted gases

DIN 4664 - Part 2 · Edition 6.1969 → replaced by DIN 4664 Edition 8.1989

Pressurized gas cylinders · Seamless steel cylinders, for acetylene dissolved under pressure, test pressure 60 atm

DIN 4664 - Part 3 · Edition 6.1969 → replaced by DIN 4664 Edition 8.1989

Pressurized gas cylinders · Seamless steel cylinders, from 5 liters capacity, test pressure 100 atm

DIN 4664 - part 4 edition 6.1969 → replaced by DIN 4664 edition 8.1989

Pressurized gas cylinders · Seamless steel cylinders, up to 5 liters capacity, test pressure 225 atm

DIN 4664 - Part 5 · Edition 6.1969 → replaced by DIN 4664 Edition 8.1989

Pressurized gas cylinders · Seamless steel cylinders, from 5 liters capacity, test pressure 225 atm

DIN 4664 - Part 6 · Edition 6.1969 → replaced by DIN 4664 Edition 8.1989

Pressurized gas cylinders · Seamless steel cylinders, up to 2.67 liters capacity, test pressure 250 atm

DIN 4664 - Part 7 · Edition 6.1969 → replaced by DIN 4664 Edition 8.1989

Pressurized gas cylinders · Seamless steel cylinders, from 4 liters capacity, test pressure 250 atm

DIN 4664 - Part 8 Edition 6.1969 → replaced by DIN 4664 Edition 8.1989

Pressurized gas cylinders · Seamless steel cylinders, up to 10 liters volume, test pressure 300 atm

DIN 4664 - Part 9 · Edition 6.1969 → replaced by DIN 4664 Edition 8.1989

Pressurized gas cylinders · Seamless steel cylinders, from 5 liters capacity, test pressure 300 atm

DIN 4664 - Part 10 · Edition 6.1969 → replaced by DIN 4664 Edition 8.1989

Pressurized gas cylinders · Seamless steel cylinders, neck rings

DIN 4664 - part 11 edition 6.1969 → replaced by DIN 4664 edition 8.1989

Pressurized gas cylinders · Seamless steel cylinders, protective caps

DIN 4664 - Part 12 · Edition 6.1969 → replaced by DIN 4664 Edition 8.1989

Pressurized gas cylinders · Seamless steel cylinders, shrink-on feet

DIN 4664 - Part 13 · Edition 3.1978 → replaced by DIN 4664 Edition 8.1989

Pressurized gas cylinders · Seamless steel cylinders, labeling

DIN 4668 edition 9.1968 → replaced by DIN EN 962 edition 9.1996

Compressed gas cylinders · Thread for valve sleeves, neck rings and protective caps

DIN 4674 - Part 1 · Edition 7.1964 → withdrawn

Handwheels for gas cylinder valves

DIN 4676 edition 11.1955 → withdrawn

Compressed gas systems · Connections for vehicle tanks and barrels, for compressed and liquefied gases

DIN 4680 - Part 1 Edition 5.1992 → replaced by DIN EN 12542 Edition 12.2010

Stationary steel pressure vessels for liquid gas, for above-ground installation · Dimensions, equipment

DIN 4680 - Part 2 · Edition 5.1992 → replaced by DIN EN 12542 Edition 12.2010

Fixed pressure vessels made of steel for liquid gas, for semi-above ground installation · Dimensions, equipment

DIN 4680 edition 11.1978 → replaced by DIN 4680 part 1 edition 5.1992

Fixed pressure vessels made of steel, for propane, butane and their mixtures, for above-ground installation · Dimensions, equipment

DIN 4681 - part 1 edition 1.1988 → replaced by DIN EN 14075 edition 1.2003

Stationary steel pressure vessels for liquid gas for underground installation · Dimensions, equipment

DIN 4681 - Part 1 · Edition 6.1983 → replaced by Edition 1.1988

Stationary steel pressure vessels for liquid gas for underground installation · Dimensions, equipment

DIN 4681 - Part 2 Edition 6.1984 → replaced by DIN EN 12542 Edition 12.2010

Stationary steel pressure vessels for liquid gas, with outer jacket, for underground installation · Dimensions, equipment

DIN 4681 - part 3 edition 5.1986 → replaced by DIN EN 12542 edition 12.2010

Stationary steel pressure vessels for liquid gas, for underground installation. External coating as corrosion protection with particular effectiveness against chemical and mechanical attacks

DIN 4701 - Part 1 edition 3.1983 → replaced by DIN EN 12831 edition 8.2003

Rules for calculating the heat demand of buildings · Basis of calculation

DIN 4701 - part 2 edition 3.1983 → replaced by DIN EN 12831 edition 8.2003

Rules for calculating the heat demand of buildings · Tables, images, algorithms

DIN 4701 - Part 3 Edition 8.1989 → replaced by DIN EN 12831 Edition 8.2003

Rules for calculating the heat demand of buildings · Design of space heating systems

DIN 4701 edition 1.1959 → replaced by DIN 4701 parts 1 and 2 edition 3.1983

Rules for calculating the heat demand of buildings

DIN 4701 edition 7.1947 → replaced by edition 1.1959

Heating · Rules for calculating the heat demand of buildings

DIN 4701 edition 8.1944 → replaced by edition 7.1947

Rules for calculating the heating requirements of buildings

DIN 4701 edition 1929 → replaced by edition 8.1944

Rules for calculating the heat demand of buildings and for calculating the boiler and radiator sizes of heating systems

The standard was published in book form.

DIN 4702 - Part 1 · Edition 3.1990 → withdrawn without replacement

Boiler · Terms, requirements, testing, labeling

The use of DIN EN 303 part 1 edition 12.2003 and DIN EN 14394 edition 12.2008 is recommended.

DIN 4702 - part 1 edition 12.1979 → replaced by edition 3.1990 and DIN 4702 part 4 edition 3.1990

Boiler · Terms, nominal output, heating requirements, labeling

DIN 4702 - Part 1 · Edition 1.1967 → replaced by Edition 12.1979

Boiler · Terms, nominal output, heating requirements, labeling

DIN 4702 - Part 2 Edition 3.1990 → withdrawn without replacement

Boiler · Rules for the heating test

The use of DIN EN 304 edition 1.2004 is recommended

DIN 4702 - Part 2 · Edition 12.1967 → replaced by Edition 3.1990

Boiler · test rules

DIN 4702 - Part 3 · Edition 3.1990 → replaced by DIN EN 297 edition 11.1994, DIN EN 625 edition 10.1995, DIN EN 656 edition 1.2000 and DIN EN 13836 edition 6.2007

Boiler · Special gas boiler with burner without fan

DIN 4702 - Part 3 · Edition 8.1980 → replaced by Edition 3.1990

Boiler · Special gas boiler with burner without fan

DIN 4702 - Part 4 Edition 3.1990 → withdrawn without replacement

Boilers · Boilers for wood, straw and similar fuels · Terms, requirements, tests

The use of DIN EN 303 Part 5, Edition 10.2012 is recommended.

DIN 4702 - Part 6 Edition 3.1990 → withdrawn

Boilers · Condensing boilers for gaseous fuels

DIN 4702 - Part 7 Edition 4.1996 → replaced by DIN EN 15034 Edition 1.2007

Boilers · Condensing boilers for liquid fuels

DIN 4702 - Part 8 · Edition 3.1990 → current

Boiler · Determination of the standard efficiency and the standard emission factor

DIN 4703 - Part 1 · Edition 12.1999 → current

Space radiators · Dimensions of sectional radiators

DIN 4703 - part 1 edition 9.1988 → replaced by edition 12.1999 and DIN EN 442 part 2 edition 2.1997

Space heater · Dimensions, standard heat output

DIN 4703 - Part 1 · Edition 4.1977 → replaced by Edition 9.1988

Heat output of space radiators · Sectional radiators

DIN 4703 - part 2 edition 4.1977 → replaced by DIN 4703 part 1 edition 9.1988

Heat output from space radiators · Steel panel radiators

DIN 4703 - Part 2 · Edition 1.1967 → replaced by Edition 4.1977 and DIN 4703 Parts 1 and 3 Edition 4.1977

Heat output from space radiators · Steel panel radiators

DIN 4703 - part 3 edition 10.2000 → current

Room radiator · Conversion of the standard heat output

DIN 4703 - part 3 edition 9.1988 → replaced by edition 10.2000, DIN EN 442 part 1 edition 5.1996 and DIN EN 442 part 2 edition 2.1997

Room radiators · Terms, limit dimensions, conversions, installation instructions

DIN 4703 - Part 3 · Edition 4.1977 → replaced by Edition 9.1988

Heat output of space radiators · General, conversion

DIN 4704 - part 1 edition 9.1988 → replaced by DIN EN 442 part 2 edition 2.1997

Testing of space heaters · Test rules

DIN 4704 - part 1 edition 8.1976 → replaced by edition 9.1988, DIN 4703 edition 9.1988 and DIN EN 442 part 1 edition 5.1996

Testing of space heaters · Test rules

DIN 4704 - Part 2 · Edition 10.1999 → current

Thermal analysis of space heaters · Open test cabin

DIN 4704 - part 2 edition 9.1988 → replaced by edition 10.1999 and DIN EN 442 part 2 edition 2.1997

Testing of space heaters · Open test cabin

DIN 4704 - Part 2 · Edition 8.1976 → replaced by Edition 9.1988

Testing of space heaters · Open test cabin

DIN 4704 - Part 3 · Edition 8.1976 → withdrawn

Testing of space heaters · Closed test room

DIN 4704 - Part 4 Edition 10.1999 → withdrawn without replacement

Thermal analysis of space heating elements · Underfloor heating elements with and without a fan in the open test cabin

The use of DIN EN 16430 parts 1, 2 and 3, edition 3.2015 is recommended.

DIN 4704 - part 4 edition 11.1984 → replaced by edition 10.1999

Testing of room heating elements Testing of underfloor heating elements with and without a fan in the open test cabin

DIN 4704 - Part 5 Edition 10.1999 → withdrawn without replacement

Thermal analysis of space radiators · Radiators with a fan

The use of DIN EN 16430 parts 1, 2 and 3, edition 3.2015 is recommended.

DIN 4704 - part 5 edition 11.1984 → replaced by edition 10.1999

Testing of space radiators · Testing of radiators with a fan

DIN 4705 - part 1 edition 10.1993 → replaced by DIN EN 13384 part 1 edition 3.2003

Combustion engineering calculation of chimney dimensions · Terms, detailed calculation method

DIN 4705 - Part 1 · Edition 9.1979 → replaced by Edition 10.1993

Calculation of chimney dimensions · Terms, detailed calculation method

DIN 4705 - Part 2 Edition 9.1979 → replaced by DIN EN 13384 Part 1 Edition 3.2003

Calculation of chimney dimensions · Approximation method for chimneys with single occupancy

DIN 4705 - Part 3 Edition 7.1984 → replaced by DIN EN 13384 Part 2 Edition 12.2003

Calculation of chimney dimensions · Approximation method for multiple chimneys

DIN 4705 - Part 10 · Edition 12.1984 → withdrawn

Calculation of chimney dimensions · Approximation method for single chimneys · Design IIIa for flue gas temperatures T _e = 140 ° C, 190 ° C and 240 ° C, Design I, II, III and IIIa for flue gas temperature T _e = 80 ° C

DIN 4708 - Part 1 · Edition 4.1994 → current

Central water heating systems · Terms and calculation bases

DIN 4708 - Part 1 · Edition 10.1979 → replaced by Edition 4.1994

Central water heating systems · Terms and calculation bases

DIN 4708 - Part 2 · Edition 4.1994 → current

Central water heating systems · Rules for determining the heat requirement for heating drinking water in residential buildings

DIN 4708 - Part 2 Edition 10.1979 → replaced by Edition 4.1994

Central water heating systems · Rules for determining the heat requirement for heating drinking water in residential buildings

DIN 4708 - Part 3 · Edition 4.1994 → current

Central water heating systems · Rules for performance testing of water heaters for residential buildings

DIN 4708 - part 3 edition 10.1979 → replaced by edition 4.1994

Central water heating systems · Rules for testing the performance of water heaters for residential buildings

DIN 4709 edition 11.2011 → withdrawn without replacement

Determination of the standard degree of utilization for micro-CHP units up to 70 kW nominal heat load

The application of DIN EN 50465 edition 6.2015 is recommended

DIN 4710 - Correction 1 · Edition 11.2006 → current

Statistics of meteorological data for calculating the energy requirement of heating and ventilation systems in Germany · Corrections to DIN 4710: 2003-01

DIN 4710 edition 1.2003 → current

Statistics of meteorological data for calculating the energy requirement of heating and ventilation systems in Germany

DIN 4710 - supplement 1 edition 1.2003 → current

Statistics of meteorological data for calculating the energy requirements of heating and ventilation systems in Germany · Correlation between the air temperature t and the water vapor content χ

DIN 4710 edition 11.1982 → replaced by edition 1.2003

Meteorological data for calculating the energy consumption of heating and ventilation systems

DIN 4713 - Part 1 · Edition 12.1980 → current

Consumption-dependent heating cost billing · General, terms

DIN 4713 - Part 2 edition 3.1990 → replaced by DIN EN 835 edition 11.1994

Consumption-dependent heat cost billing · Heat cost allocator without auxiliary energy based on the evaporation principle

DIN 4713 - part 2 edition 12.1980 → replaced by edition 3.1990

Consumption-dependent heat cost billing · Heat cost allocator based on the evaporation principle

DIN 4713 - Part 3 Edition 1.1989 → replaced by DIN EN 834 Edition 11.1994

Consumption-dependent heat cost billing · Heat cost allocator with auxiliary energy

DIN 4713 - part 3 edition 12.1980 → replaced by edition 1.1989

Consumption-dependent heat cost billing · Heat cost allocator with electrical measurement value recording

DIN 4713 - part 4 edition 12.1980 → replaced by DIN EN 1434 parts 1, 5 and 6 edition 4.1997

Consumption-dependent heat billing · Heat meter and water meter

DIN 4713 - Part 5 Edition 12.1980 → current

Consumption-dependent heating cost billing · Operating cost distribution and billing

DIN 4713 - Part 6 Edition 12.1980 → withdrawn

Consumption-dependent heating billing · Procedure for registration

DIN 4714 - part 2 edition 12.1980 → replaced by DIN 4713 part 2 edition 3.1990

Structure of the heating and hot water cost allocator · Heat cost allocator based on the evaporation principle

DIN 4714 - part 3 edition 12.1980 → replaced by DIN 4713 part 3 edition 1.1989

Structure of the heat cost allocator · Heat cost allocator with electrical measurement value acquisition

DIN 4715 - Part 1 Edition 7.1994 → replaced by DIN EN 14240 Edition 4.2004

Room cooling surfaces · Performance measurement with free flow · Test rules

DIN 4719 edition 7.2009 → current

Ventilation of dwellings · Requirements, performance tests and labeling of ventilation devices

DIN 4720 Edition 6.1979 → replaced by DIN 4703 Part 1 Edition 9.1988

Cast radiators · Articulated design · Dimensions and installation dimensions

DIN 4720 · Edition 2.1976 → replaced by Edition 6.1979

Cast radiators · Articulated design · Dimensions and installation dimensions

DIN 4721 edition 6.2001 → replaced by DIN 4726 edition 10.2008

Plastic piping systems for hot water underfloor heating and radiator connectionPolyethylene with increased temperature resistance (PE-RT)

DIN 4722 Edition 7.1987 → replaced by DIN 4703 Part 1 Edition 9.1988

Steel radiators, articulated design · Dimensions and installation dimensions

DIN 4724 · Edition 4.2001 → current

Plastic piping systems for hot water underfloor heating and radiator connections Crosslinked medium density polyethylene (PE-MDX)

DIN 4724 edition 9.1993 → replaced by edition 4.2001

Pipelines made of cross-linked medium density polyethylene for hot water underfloor heating · Special requirements and testing

DIN 4725 - part 1 edition 5.1992 → replaced by DIN EN 1264 part 1 edition 11.1997

Hot water underfloor heating · Terms, general symbols

DIN 4725 - part 2 edition 5.1992 → replaced by DIN EN 1264 part 2 edition 11.1997

Hot water underfloor heating · Thermal test

DIN 4725 - Part 3 Edition 5.1992 → replaced by DIN EN 1264 Part 3 Edition 11.1997

Hot water underfloor heating · Heating capacity and design

DIN 4725 - part 4 edition 9.1992 → replaced by DIN EN 1264 part 4 edition 12.2001

Hot water underfloor heating · Structure and construction

DIN 4725 - Part 4 Edition 5.1992 → replaced by Edition 9.1992

Hot water underfloor heating · Structure and construction

DIN 4725 - Part 200 Edition 3.2001 → replaced by DIN EN 1264 Part 2 Edition 1.2009

Hot water underfloor heating systems and components Determination of the heat output (pipe coverage> 0.065 m)

DIN 4726 · Edition 10.2008 → current

Hot water surface heating and radiator connections · Plastic pipe and composite pipe systems

DIN 4726 edition 1.2000 → replaced by edition 10.2008

Hot water underfloor heating and radiator connections · Pipes made of plastic

DIN 4726 edition 9.1993 → replaced by edition 1.2000

Plastic pipelines for hot water underfloor heating · General requirements

DIN 4726 edition 9.1988 → replaced by edition 9.1993

Plastic pipelines for hot water underfloor heating · General requirements

DIN 4727 edition 9.1998 → replaced by DIN 4726 edition 1.2000, DIN EN ISO 15876 parts 1, 2, 3 and 5 edition 3.2004 and DIN ISO / TS 15876 part 7 edition 3.2004

Polybutene pipelines for hot water underfloor heating · Special requirements and testing

DIN 4728 edition 9.1993 → replaced by DIN 4726 edition 1.2000, DIN EN ISO 15874 parts 1, 2, 3 and 5 edition 3.2004 and DIN ISO / TS 15874 part 7 edition 3.2004

Polypropylene pipelines type 2 and type 3 for hot water underfloor heating · Special requirements and testing

DIN 4728 edition 9.1988 → replaced by edition 9.1993

Polypropylene pipes type 2 for hot water underfloor heating · Special requirements and testing

DIN 4729 edition 9.1993 → replaced by DIN 4726 edition 1.2000, DIN EN ISO 15875 parts 1, 2, 3 and 5 edition 3.2004 and DIN ISO / TS 15875 part 7 edition 3.2004

Pipelines made of cross-linked high density polyethylene for hot water underfloor heating · Special requirements and testing

DIN 4729 edition 9.1988 → replaced by edition 9.1993

Pipelines made of cross-linked polyethylene for hot water underfloor heating · Special requirements and testing

DIN 4731 edition 7.1989 → current

Oil heating inserts with evaporation burners · Requirements, testing and labeling

DIN 4731 edition 5.1966 → replaced by edition 7.1989

Oil heating inserts with evaporation burners · Terms, construction, performance, quality and testing

DIN 4732 edition 1.1990 → current

Oil stoves with evaporative burners

DIN 4732 edition 6.1973 → replaced by edition 1.1990

Oil stoves with evaporative burners

DIN 4733 edition 1.1990 → current

Oil storage water heater with evaporation burners

DIN 4733 edition 4.1974 → replaced by edition 1.1990

Oil storage water heater with evaporation burners

DIN 4734 - Part 1 edition 1.2011 → replaced by DIN EN 16647 edition 4.2016

Decorative fireplaces for liquid fuels - Decorative devices that generate a flame using an ethanol-based liquid or gel fuel · Use in private households

DIN 4736 - part 1 edition 4.1991 → replaced by DIN EN 12514 part 1 edition 5.2000

Oil supply systems for oil burners · Components, oil delivery units, control and safety devices · Oil supply tanks · Safety requirements and testing

DIN 4736 - Part 1 · Edition 6.1980 → replaced by Edition 4.1991

Oil supply systems for oil burners · Components, oil delivery units, control and safety devices · Oil supply tanks · Safety requirements and testing

DIN 4736 - Part 2 Edition 1.1994 → replaced by DIN EN 12514 Part 2 Edition 5.2000

Oil supply systems for oil burners · Components, fittings, lines, filters, meters · Safety requirements and testing

DIN 4736 - Part 2 · Edition 4.1991 → replaced by Edition 1.1994

Oil supply systems for oil burners · Components, fittings, lines, filters, meters · Safety requirements and testing

DIN 4736 - Part 2 · Edition 6.1980 → replaced by Edition 4.1991

Oil supply systems for oil burners · Components, fittings, lines, filters, meters · Safety requirements and testing

DIN 4737 - Part 1 · Edition 8.2002 → current

Oil regulator for evaporation burners · General equipment · Safety requirements and testing

DIN 4737 - Part 1 · Edition 6.1987 → replaced by Edition 8.2002

Oil regulator for evaporation burners · Safety requirements and testing

DIN 4737 - Part 2 · Edition 8.2002 → current

Oil regulator for evaporation burners · Additional equipment · Safety requirements and testing

DIN 4737 - Part 2 · Edition 6.1987 → replaced by Edition 8.2002

Oil regulator for evaporation burners with additional equipment · Safety requirements and testing

DIN 4737 edition 7.1978 → replaced by DIN 4737 parts 1 and 2 edition 6.1987

Oil regulator for evaporation burners · Terms, construction, performance, quality and testing

DIN 4739 - Part 2 Edition 7.2002 → withdrawn without replacement

Regulation, control and ignition devices for oil evaporation burners · Electrical control devices · Safety requirements and testing

The use of DIN EN 1 edition 12.2007, DIN EN ISO 23553 part 1 edition 10.2009 and DIN EN 298 edition 11.2012 is recommended.

DIN 4739 - Part 2 · Edition 2.1982 → replaced by Edition 7.2002

Regulation, control and ignition devices for oil evaporation burners · Electrical control devices · Safety requirements and testing

DIN 4739 - Part 3 · Edition 7.2002 → withdrawn without replacement

Regulation, control and ignition devices for oil evaporation burners · Electrical ignition devices · Safety requirements and testing

The use of DIN EN 1 edition 12.2007, DIN EN 60335 part 2 edition 7.2010 and DIN EN 298 edition 11.2012 is recommended.

DIN 4739 - Part 3 · Edition 2.1982 → replaced by Edition 7.2002

Regulation, control and ignition devices for oil evaporation burners · Electrical ignition devices · Safety requirements and testing

DIN 4740 - Part 1 Edition 8.1984 → current

Ventilation systems · Pipes made of plasticizer-free polyvinyl chloride (PVC-U) · Calculation of the minimum wall thickness

DIN 4740 - Part 2 Edition 8.1987 → current

Ventilation systems · Ventilation pipes made of plasticizer-free polyvinyl chloride (PVC-U) · Fittings for pipes, bends · Minimum wall thicknesses

DIN 4740 - Part 5 Edition 9.1988 → current

Ventilation systems · Ventilation ducts made of plasticizer-free polyvinyl chloride (PVC-U) · Unstiffened ducts · Minimum wall thicknesses

DIN 4741 - Part 1 Edition 8.1984 → current

Ventilation systems · Pipes made from polypropylene (PP) pipes · Calculation of the minimum wall thickness

DIN 4741 - Part 2 Edition 8.1987 → current

Ventilation systems · Ventilation lines made of polypropylene (PP), Type 1 · Fittings for pipes, bends · Minimum wall thicknesses

DIN 4741 - Part 5 Edition 9.1988 → current

Ventilation systems · Ventilation ducts made of polypropylene (PP), type 1 · Unstiffened ducts · Minimum wall thicknesses

DIN 4747 - Part 1 - Correction 1 · Edition 9.2009 → current

District heating systems · Safety equipment of substations, house stations and house systems for connection to heating water district heating networks · Correction to DIN 4747-1: 2003-11

DIN 4747 - Part 1 · Edition 11.2003 → current

District heating systems · Safety equipment for substations, house stations and house systems for connection to heating water district heating networks

DIN 4747 - Part 1 edition 7.1991 → replaced by edition 11.2003

District heating systems · Safety-related design of house stations for connection to heating water district heating networks

DIN 4750 edition 2.1993 → withdrawn

Standpipes for steam discharge when the pressure is exceeded from steam boiler and heating systems with a permissible operating pressure of up to 0.5 bar · Requirements

DIN 4750 edition 8.1965 → replaced by edition 2.1993

Safety requirements for low pressure steam generators

DIN 4751 - Part 1 edition 10.1994 → replaced by DIN EN 12828 edition 6.2003

Water heating systems · Open and closed, physically secured heat generation systems with flow temperatures of up to 120 ° C · Safety equipment

DIN 4751 - Part 1 · Edition 2.1993 → replaced by Edition 10.1994

Water heating systems · Open and closed, physically secured heat generation systems with flow temperatures of up to 120 ° C · Safety equipment

DIN 4751 - Part 1 edition 11.1962 → replaced by edition 2.1993

Heating systems · Safety equipment for hot water heating systems with flow temperatures of up to 110 ° C

DIN 4751 - Part 2 edition 10.1994 → replaced by DIN EN 12828 edition 6.2003

Water heating systems · Closed, thermostatically protected heat generation systems with flow temperatures up to 120 ° C · Safety equipment

DIN 4751 - Part 2 · Edition 2.1993 → replaced by Edition 10.1994

Water heating systems · Closed, thermostatically protected heat generation systems with flow temperatures up to 120 ° C · Safety equipment

DIN 4751 - Part 2 · Edition 9.1968 → replaced by Edition 2.1993

Safety equipment for heating systems with flow temperatures up to 110 ° C · Open and closed water heating systems up to 300,000 kcal / h with thermostatic protection

DIN 4751 - Part 3 · Edition 2.1993 → replaced by DIN EN 12828 Edition 6.2003

Water heating systems · Closed, thermostatically secured heat generation systems with 50 kW nominal heat output with forced circulation heat generators and flow temperatures up to 95 ° C · Safety equipment

DIN 4751 - Part 3 · Edition 3.1976 → replaced by Edition 2.1993

Safety equipment for heating systems with flow temperatures of up to 110 ° C · Open and closed water heating systems with forced-flow heat generators up to 10 liters and a nominal heat output of up to 150 kW ≈ 130,000 kcal / h, with thermostatic protection

DIN 4751 - part 4 edition 9.1980 → replaced by DIN 4751 part 2 edition 2.1993

Safety equipment for heat generation systems with flow temperatures of up to 120 ° C · Closed, thermostatically protected water heating systems with static heights over 15 m or rated heat outputs over 350 kW

DIN 4752 edition 1.1967 → replaced by DIN EN 12953 part 6 edition 8.2002

Hot water heating systems with flow temperatures of more than 110 ° C (protection against pressures above 0.5 atü) · Equipment and installation

DIN 4753 - Part 1 · Edition 11.2011 → current

Drinking water heaters, drinking water heating systems and storage drinking water heaters · Tanks with a volume of over 1000 l

DIN 4753 - Part 1 Edition 3.1988 → replaced by Edition 11.2011, DIN 4753 Part 7 Edition 11.2011 and DIN EN 12897 Edition 9.2006

Water heaters and water heating systems for drinking and process water · Requirements, labeling, equipment and testing

DIN 4753 - Part 1 Edition 10.1980 → replaced by Edition 3.1988

Water heating systems for drinking and industrial water · Execution, equipment and testing

DIN 4753 - Part 2 · Edition 1.1984 → withdrawn

Water heating systems for drinking and industrial water · Procedure for registering water heaters or water heating systems

DIN 4753 - Part 3 · Edition 11.2011 → current

Drinking water heaters, drinking water heating systems and storage drinking water heaters · Water-side corrosion protection through enamelling and cathodic corrosion protection · Requirements and testing

DIN 4753 - Part 3 · Edition 7.1993 → replaced by Edition 11.2011

Water heaters and water heating systems for drinking and process water · Water-side corrosion protection through enamelling · Requirements and testing

DIN 4753 - Part 3 · Edition 3.1991 → replaced by Edition 7.1993

Water heaters and water heating systems for drinking and process water · Water-side corrosion protection through enamelling · Requirements and testing

DIN 4753 - Part 3 · Edition 5.1987 → replaced by Edition 3.1991

Water heaters and water heating systems for drinking and process water · Water-side corrosion protection through enamelling · Requirements and testing

DIN 4753 - Part 3 · Edition 12.1984 → replaced by Edition 5.1987

Water heating systems for drinking and process water · Water-side corrosion protection through enamelling · Requirements and testing

DIN 4753 - Part 4 Edition 11.2011 → current

Drinking water heaters, drinking water heating systems and DHW storage tanks · Water-side corrosion protection through thermosetting, synthetic resin-bonded coating materials

DIN 4753 - Part 4 Edition 10.1994 → replaced by Edition 11.2011

Water heaters and water heating systems for drinking and process water · Water-side corrosion protection through coatings made from thermosetting, thermosetting coating materials · Requirements and testing

DIN 4753 - Part 4 Edition 7.1982 → replaced by Edition 10.1994

Water heating systems for drinking and process water · Water-side corrosion protection through thermosetting, synthetic resin-bound coating materials · Requirements and testing

DIN 4753 - Part 5 Edition 11.2011 → current

Drinking water heaters, drinking water heating systems and storage drinking water heaters · Water-side corrosion protection through linings made of natural or synthetic rubber

DIN 4753 - part 5 edition 10.1994 → replaced by edition 11.2011

Water heaters and water heating systems for drinking and process water · Water-side corrosion protection through linings with foils made of natural or synthetic rubber · Requirements and testing

DIN 4753 - part 5 edition 7.1982 → replaced by edition 10.1994

Water heating systems for drinking and process water · Water-side corrosion protection through linings with foils made of natural or synthetic rubber · Requirements and testing

DIN 4753 - part 6 edition 2.1986 → replaced by DIN 4753 part 3 edition 11.2011

Water heating systems for drinking and process water · Cathodic corrosion protection for enamelled steel tanks · Requirements and testing

DIN 4753 - Part 7 · Edition 11.2011 → current

Drinking water heaters, drinking water heating systems and storage drinking water heaters · Tanks with a volume of up to 1000 l · Requirements for manufacture, thermal insulation and corrosion protection

DIN 4753 - Part 7 Edition 10.1988 → replaced by Edition 11.2011 and DIN 4753 Part 1 Edition 11.2011

Water heaters and water heating systems for drinking and process water · Water-side corrosion protection through corrosion-resistant metallic materials · Requirements and testing

DIN 4753 - Part 9 Issue 9.1990 → withdrawn

Water heaters and water heating systems for drinking and process water · Water-side corrosion protection through thermoplastic coating materials · Requirements and testing

DIN 4753 - Part 10 · Edition 5.1989 → withdrawn

Water heaters and water heating systems for drinking and process water · Cathodic corrosion protection for non-coated steel tanks · Requirements and testing

DIN 4753 - part 11 edition 2.1990 → replaced by DIN 4753 part 1 edition 11.2011

Water heaters and water heating systems for drinking and process water · Intermediate medium heat exchangers · Requirements, testing and labeling

DIN 4754 - Part 1 · Edition 3.2015 → current

Heat transfer systems with organic heat carriers · Safety requirements, testing

DIN 4754 - Part 2 · Edition 3.2015 → current

Heat transfer systems with organic heat transfer media · Flow safeguards

DIN 4754 - Part 3 · Edition 3.2015 → current

Heat transfer systems with organic heat transfer media · Level protection

DIN 4754 edition 9.1994 → replaced by DIN 4754 part 1 edition 3.2015

Heat transfer systems with organic heat carriers · Safety requirements, testing

DIN 4754 edition 12.1990 → replaced by edition 9.1994

Heat transfer systems with organic heat carriers · Safety requirements, testing

DIN 4754 edition 1.1980 → replaced by edition 12.1990

Heat transfer systems with organic liquids · Safety requirements, testing

DIN 4755 Edition 11.2004 → current

Oil firing systems · Technical rule for oil firing installations (TRÖ) · Testing

DIN 4755 - Part 1 edition 9.1981 → replaced by DIN 4755 edition 11.2004

Oil firing systems · Oil firing systems in heating systems · Safety requirements

DIN 4755 - Part 2 · Edition 2.1984 → replaced by

Oil firing systems · Heating oil supply, heating oil supply systems · Safety requirements, testing

DIN 4755 · Edition 6.1977 → replaced by DIN 4755 Part 1 Edition 9.1981 and DIN 4755 Part 2 Edition 2.1984

Oil firing in heating systems · Construction, execution, safety principles

DIN 4755 edition 7.1966 → replaced by edition 6.1977

Oil firing in heating systems · Construction, execution · Safety principles

DIN 4755 edition 1.1959 → replaced by edition 7.1966

Oil firing in heating systems · Guidelines

DIN 4756 edition 2.1986 → withdrawn

Gas firing systems · Gas firing systems in heating systems · Safety requirements

DIN 4756 · Edition 6.1977 → replaced by Edition 2.1986

Gas firing in heating systems · Construction, execution, safety principles

DIN 4757 - part 1 edition 11.1980 → replaced by DIN EN 12976 part 1 edition 3.2001

Solar heating systems with water or water mixtures as heat transfer medium · Requirements for the safety-related design

DIN 4757 - Part 2 Edition 11.1980 → withdrawn

Solar heating systems with organic heat carriers · Requirements for the safety-related design

DIN 4757 - Part 3 Edition 11.1980 → DIN EN 12976 Part 1 Edition 3.2001

Solar heating systems · Solar collectors, terms, safety requirements, checking the idle temperature

DIN 4757 - part 4 edition 7.1982 → replaced by DIN EN 12975 part 1 edition 3.2001 and DIN EN 12975 part 2 edition 12.2002

Solar heating systems · Solar collectors, determination of efficiency, heat capacity and pressure drop

DIN 4759 - Part 1 · Edition 4.1986 → current

Heat generation systems for several types of energy · One solid fuel furnace and one oil or gas furnace and only one chimney · Safety requirements and tests

DIN 4760 · Edition 6.1982 → current

Deviations in shape · Terms, classification system

DIN 4760 · Edition 7.1960 → replaced by Edition 6.1982

Deviations in shape · Terms, classification system

DIN 4761 edition 12.1978 → replaced by DIN EN ISO 8785 edition 10.1999

Surface character · Geometric surface texture features, terms, abbreviations

DIN 4762 edition 1.1989 → replaced by DIN EN ISO 4287 edition 10.1998

Surface roughness · Terms · Surface and its parameters · Identical to ISO 4287-1: 1984

DIN 4762 - Part 1 edition 8.1960 → replaced by DIN 4762 edition 1.1989

Recording of the shape deviations 2. to. 5. Organization of surfaces on the basis of surface sections · Terms for reference systems and dimensions

DIN 4762 - part 2 edition 8.1960 → replaced by DIN 4762 edition 1.1989

Recording of the shape deviations 2. to. 5. Organization of surfaces on the basis of surface sections · Evaluation of profile sections with a geometrically ideal reference profile as a basis

DIN 4763 edition 3.1981 → withdrawn

Graduation of the numerical values ​​for roughness measurements

DIN 4764 · Edition 6.1982 → current

Surfaces on parts for mechanical engineering and precision engineering · Terms according to stress

DIN 4765 edition 3.1974 → withdrawn

Determination of the area contact ratio of surfaces · Terms

DIN 4766 - Part 1 Issue 3.1981 → withdrawn

Manufacturing process for the roughness of surfaces Achievable mean surface roughness R _z according to DIN 4768 Part 1

DIN 4766 - Part 2 Issue 3.1981 → withdrawn

Manufacturing process for the roughness of surfaces Achievable mean roughness values ​​R _a according to DIN 4768 Part 1

DIN 4768 · Edition 5.1990 → withdrawn without replacement

Determination of the roughness parameters R _a , R _z , R _max with electrical stylus instruments · Terms, measuring conditions

The application of DIN EN ISO 4288 edition 4.1988 is recommended

DIN 4768 - Part 1 Edition 8.1974 → replaced by DIN 4768 Edition 5.1990

Determination of the roughness parameters R _a , R _z , R _max with electrical stylus instruments

DIN 4768 - Part 1 - Supplement 1 Edition 10.1978 → withdrawn

Determination of the roughness parameters R _a , R _z , R _max with electrical stylus instruments · Conversion of the measured parameter R _a into R _z and vice versa

DIN 4769 - Part 1 · Edition 5.1972 → withdrawn

Surface comparison samples · Technical delivery conditions, application

DIN 4769 - Part 2 · Edition 5.1972 → withdrawn

Surface comparison sample · Machined surfaces with a periodic profile

DIN 4769 - Part 3 · Edition 5.1972 → withdrawn

Surface comparison sample · Machined surfaces with aperiodic profile

DIN 4769 - Part 4 Edition 7.1974 → withdrawn without replacement

Surface comparison sample · Blasted metal surfaces

The use of DIN EN ISO 8501 Part 1 Edition 3.2002 is recommended.

DIN 4771 edition 4.1977 → withdrawn

Measurement of the profile depth P _t of surfaces

DIN 4772 edition 11.1979 → replaced by DIN EN ISO 3274 edition 4.1998

Electrical contact stylus devices for measuring surface roughness using the stylus method

DIN 4774 · Edition 6.1981 → withdrawn

Measurement of the wave depth with electrical stylus instruments

DIN 4775 edition 6.1982 → replaced by DIN EN ISO 4288 edition 4.1998

Checking the roughness of workpiece surfaces · Visual and tactile comparison, stylus method

DIN 4776 · edition 5.1990 → replaced by DIN EN ISO 13565 parts 1 and 2 edition 4.1998

Roughness measurement · Parameters R _K , R _PK , R _VK , M _r1 , M _r2 to describe the material content in the roughness profile · Measurement conditions and evaluation methods

DIN 4776 - supplement 1 edition 5.1990 → replaced by DIN EN ISO 13565 parts 1 and 2 edition 4.1998

Roughness measurement · Parameters R _K , R _PK , R _VK , M _r1 , M _r2 to describe the material content in the roughness profile · Measurement conditions and evaluation methods · Application notes and examples

DIN 4777 edition 5.1990 → replaced by DIN EN ISO 11562 edition 4.1998

Surface measurement technology · Profile filters for use in electrical contact stylus devices · Phase correct filters

DIN 4787 - Part 1 Issue 9.1981 → withdrawn without replacement

Oil atomization burner · Terms, safety requirements · Testing, labeling

The application of DIN EN 267 edition 4.2010 is recommended.

DIN 4787 - Part 2 Edition 9.1981 → replaced by DIN EN 230 Edition 10.2005

Oil atomization burners · Flame monitoring devices, flame monitors and automatic firing systems · Safety requirements, testing, labeling

DIN 4788 - Part 1 · Edition 6.1977 → withdrawn

Gas burner · Gas burner without fan

DIN 4788 - Part 2 · Edition 2.1990 → replaced by DIN EN 676 Edition 12.1996

Gas burner · Gas burner with fan · Terms, safety requirements, testing, labeling

DIN 4788 - Part 2 · Edition 6.1977 → replaced by Edition 2.1990

Gas burner · Gas burner with fan

DIN 4788 - Part 3 · Edition 4.1989 → replaced by DIN EN 298 Edition 2.1994

Gas burners · Flame monitoring devices · Flame monitors, control devices and automatic firing systems · Terms, safety requirements, testing, labeling

DIN 4788 - Part 3 · Edition 6.1977 → replaced by Edition 4.1989

Gas burners · Flame monitoring devices, flame monitors, control devices and automatic firing systems

DIN 4789 edition 8.1982 → replaced by DIN EN 226 edition 6.1988

Connection of oil atomization and gas burners with blower to the heat generator · Connection dimensions

DIN 4790 edition 9.1985 → replaced by DIN EN 293 edition 6.1992

Oil pressure atomizer nozzles · Dimensions, requirements, testing, labeling

The standard has also been replaced by the preliminary standard DIN V ENV 299 edition 6.1992.

DIN 4793 edition 1.1984 → replaced by DIN EN 12669 edition 9.2000

Gas-fired devices for the CO ₂ enrichment of the room air in greenhouses · Safety requirements, testing, labeling

DIN 4794 - Part 1 edition 12.1980 → replaced by DIN EN 13842 edition 10.2004

Fixed warm air generators, with and without heat exchangers · General and ventilation requirements, testing

DIN 4794 - Part 2 edition 12.1980 → replaced by DIN EN 13842 edition 10.2004

Fixed warm air generators · Oil-fired warm air generators, requirements, testing

DIN 4794 - Part 3 Edition 12.1980 → withdrawn without replacement

Fixed warm air generators · Gas-fired warm air generators with heat exchangers, requirements, testing

The application of DIN EN 1020 edition 5.2010 is recommended.

DIN 4794 - Part 5 · Edition 6.1980 → replaced by DIN EN 13842 Edition 10.2004

Fixed air heaters · General and safety requirements, installation, operation

DIN 4794 - Part 7 · Edition 1.1980 → withdrawn

Fixed warm air generators · Gas-fired warm air generators without heat exchangers · Safety requirements, testing

DIN 4795 edition 4.1991 → replaced by DIN EN 16475 part 3 edition 11.2016

Secondary air devices for house chimneys · Terms, safety requirements, testing, labeling

DIN 4795 edition 7.1985 → replaced by edition 4.1991

Secondary air devices for house chimneys · Terms, safety requirements, testing, labeling

DIN 4797 edition 1.1986 → replaced by DIN EN 13141 part 2 edition 9.2004

Heating and ventilation technology · Air supply openings · Determination of flow resistance

DIN 4798 edition 1.1988 → withdrawn

Hose lines for EL heating oil · Safety requirements, testing, labeling

DIN 4798 - part 1 edition 11.1976 → replaced by edition 1.1988

Hose lines · Hose lines for EL heating oil · Requirements, testing

DIN 4799 · Edition 6.1990 → replaced by DIN 1946 Part 4 Edition 12.2008

Ventilation technology · Air duct systems for operating rooms · Testing

DIN 4800 edition 10.1980 → withdrawn

Double-walled water heater made of steel, with two fixed floors, for standing and lying use

DIN 4801 edition 10.1980 → withdrawn

Single-walled water heater with screw-off lid, made of steel

DIN 4802 edition 10.1980 → withdrawn

Single-walled water heater with neck connection, made of steel

DIN 4803 Edition 10.1980 → withdrawn

Double-walled water heater with screw-off lid, made of steel

DIN 4804 · Edition 10.1980 → withdrawn

Double-walled water heater with neck connection, made of steel

DIN 4805 - Part 1 Edition 10.1980 → withdrawn

Connections for heating inserts for water heaters in central heating systems · Electric heating inserts

DIN 4805 - Part 2 Edition 10.1980 → withdrawn

Connections for heating inserts for water heaters in central heating systems · Pipe heating inserts

DIN 4806 edition 9.1953 → replaced by DIN 4807 part 2 edition 5.1991

Expansion vessels for heating systems

DIN 4807 - Part 1 · Edition 5.1991 → current

Expansion vessels · Terms, statutory provisions · Testing and labeling

DIN 4807 - part 1 edition 3.1980 → replaced by DIN 4807 part 3 edition 4.1986

Diaphragms made of elastomers in pressure expansion vessels · Technical requirements, construction, testing

DIN 4807 - Part 2 · Edition 5.1991 → replaced by DIN EN 12828 Edition 6.2003 and DIN EN 13831 Edition 12.2007

Expansion vessels · Open and closed expansion vessels for thermal engineering systems · Design, requirements and testing

DIN 4807 - Part 3 Edition 10.1993 → replaced by DIN EN 13831 Edition 12.2007

Expansion vessels · Diaphragms made of elastomeric materials · Requirements and testing

DIN 4807 - Part 3 · Edition 4.1986 → replaced by Edition 10.1993

Expansion vessels · Diaphragms made of elastomeric materials · Requirements and testing

DIN 4807 - Part 5 Edition 3.1997 → current

Expansion vessels · Closed expansion vessels with membrane for drinking water installations · Requirements, testing, design and labeling · Technical rules of the DVGW

DIN 4809 - Part 1 · Edition 11.1986 → current

Expansion joints made of elastomer composite materials (rubber expansion joints) for water heating systems, for a maximum operating temperature of 100 ° C and a permissible operating pressure of 10 bar · Requirements and testing

DIN 4809 - Part 2 Edition 11.1986 → current

Compensators made of elastomer composite materials (rubber expansion joints) for water heating systems · Construction and connection dimensions

DIN 4810 edition 9.1991 → current

Steel pressure vessels for water supply systems

DIN 4810 - Part 1 edition 8.1977 → replaced by DIN 4810 edition 9.1991

Steel pressure vessels for water supply systems

DIN 4811 edition 6.2008 → current

Liquid gas pressure regulators and safety devices · Requirements

DIN 4811 - Part 1 · Edition 4.1992 → replaced by DIN 4811 Edition 6.2008 and DIN EN 12864 Edition 12.2001

Pressure regulators for liquid gas · Pressure regulators for camping equipment for systems with unregulated inlet pressure

DIN 4811 - Part 1 edition 10.1978 → replaced by edition 4.1992

Pressure regulators for liquid gas

DIN 4811 - part 2 edition 9.1981 → replaced by DIN 4811 part 1 edition 4.1992

Pressure regulators for liquid gas · Pressure regulators with special connections, safety requirements, testing, marking

DIN 4811 - Part 4 Edition 8.1990 → replaced by DIN 4811 Edition 6.2008 and DIN EN 12864 Edition 12.2001

Pressure regulators for liquid gas · Pressure regulators and safety devices with unregulated inlet pressure for systems with liquid gas bottles

DIN 4815 - part 1 edition 6.2009 → replaced by DIN EN 16436 part 1 edition 9.2014

Rubber and plastic hoses for liquid gas · Hoses with and without inserts

DIN 4815 - part 1 edition 11.1979 → replaced by DIN EN 1763 part 1 edition 4.2001

Hoses for liquid gas · Hoses with and without inserts

DIN 4815 - Part 2 · Edition 12.2010 → current

Rubber and plastic hoses for liquid gas · Hose lines

DIN 4815 - Part 2 · Edition 6.1979 → replaced by Edition 12.2010

Hoses for LPG · Hose lines

DIN 4815 - Part 3 · Edition 7.1985 → withdrawn without replacement

Hoses for LPG · Hose lines for filling and emptying vehicle containers

The application of DIN EN 1762 edition 7.2004 is recommended

DIN 4815 - Part 3 · Edition 6.1979 → replaced by Edition 7.1985

Hoses for LPG · Hose lines for filling and emptying vehicle containers

DIN 4815 - Part 4 Edition 4.1987 → current

Hoses for LPG · Hoses and hose lines for LPG systems in vehicles

DIN 4815 - Part 5 Edition 8.2011 → current

Rubber and plastic hoses for liquid gas · Safety hose connection couplings and hose connection couplings for extraction from liquid gas pipeline systems · Safety requirements, testing and labeling

DIN 4815 - Part 5 Edition 3.1988 → replaced by Edition 8.2011

Hoses for liquid gas · Hose connection couplings for liquid gas lines in vehicles · Terms, safety requirements, testing, labeling

DIN 4816 · Edition 5.1957 → withdrawn

Compressed gas systems · Connections for propane soldering devices, overview, connections

DIN 4817 - Part 1 · Edition 4.1981 → current

Shut-off valves for liquid gas · Terms, safety requirements, testing, labeling

DIN 4819 edition 9.1965 → replaced by DIN 4844 part 1 edition 2.1977, DIN 4844 part 2 edition 11.1982 and DIN 4844 part 3 edition 1.1983

Safety signs and safety signs

DIN 4840 edition 2.1989 → replaced by DIN EN 397 edition 5.1995

Safety helmets · Safety requirements, testing

DIN 4840 edition 5.1981 → replaced by edition 2.1989

Safety helmets · Safety requirements, testing

DIN 4841 - part 1 edition 6.1990 → replaced by DIN EN 374 parts 1, 2 and 3 edition 4.1994, DIN EN 388 edition 8.1994, DIN EN 407 edition 4.1994, DIN EN 420 edition 6.1994 and DIN EN 511 edition 11.1994

Protective gloves · Safety requirements, testing

DIN 4841 - Part 1 edition 11.1981 → replaced by edition 6.1990

Protective gloves · Basic safety requirements, testing

DIN 4841 - part 2 edition 5.1979 → replaced by DIN 4841 part 1 edition 6.1990

Protective gloves · Protective gloves against mechanical stress · Safety requirements and testing

DIN 4841 - part 3 edition 3.1982 → replaced by DIN 4841 part 1 edition 6.1990

Protective gloves · Protective gloves against exposure to heat · Safety requirements, testing

DIN 4841 - part 4 edition 1.1987 → replaced by DIN EN 12477 edition 1.2002

Protective gloves · Welding protective gloves made of leather · Safety requirements and testing

DIN 4841 - part 5 edition 4.1987 → replaced by DIN 4841 part 1 edition 6.1990

Protective gloves · Chemical protective gloves type 2 · Safety requirements, testing

DIN 4841 - Part 5 · Edition 1.1987 → replaced by Edition 4.1987

Protective gloves · Chemical protective gloves type 2 · Safety requirements, testing

DIN 4842 edition 11.1977 → withdrawn

Determination of the degree of thermal transmittance of fabrics for heat protection clothing

DIN 4843 edition 12.1988 → replaced by DIN EN 344 edition 1.1993 and DIN EN 345 ​​edition 1.1993

Protective shoes · Safety requirements, testing

DIN 4843 edition 8.1985 → replaced by edition 12.1988

Protective shoes · Safety requirements, testing

DIN 4843 - Part 1 edition 10.1075 → replaced by DIN 4843 edition 8.1985

Safety footwear · Basic design, safety requirements, testing

DIN 4843 - part 2 edition 10.1075 → replaced by DIN 4843 edition 8.1985

Safety footwear · Basic design, materials, testing

DIN 4843 - part 3 edition 11.1075 → replaced by DIN 4843 edition 8.1985

Safety footwear · Safety shoe for the construction, stone and earth industry · Requirements, testing

DIN 4843 - Part 4 edition 11.1075 → replaced by DIN 4843 edition 8.1985

Safety footwear · Mining safety shoe · Requirements, testing

DIN 4843 - part 100 edition 8.1993 → replaced by DIN EN 344 part 2 edition 8.1996, DIN EN 345 ​​part 2 edition 8.1996 and DIN EN 13287 edition 8.2004

Safety, protective and occupational shoes · Slip resistance, metatarsal protection, cut protection insert and thermal stress · Safety requirements, testing

DIN 4843 - Part 100 · Edition 3.1991 → replaced by Edition 8.1993

Protective shoes · Slip resistance · Safety requirements, testing

DIN 4844 - Part 1 · Edition 6.2012 → current

Graphic symbols - safety colors and safety signs · Recognition distances and color and photometric requirements

DIN 4844 - Part 1 edition 5.2005 → replaced by edition 6.2012 and DIN ISO 3864 part 1 edition 6.2012

Graphic symbols - safety colors and safety signsDesign principles for safety signs for use in workplaces and in public areas (ISO 3864-1: 2002 modified)

DIN 4844 - Part 1 - Correction 1 · Edition 4.2003 → replaced by DIN 4844 Part 1, edition 5.2005

Corrections to DIN 4844-1: 2002-11

Corrections to DIN 4844 part 1 edition 11.2002

DIN 4844 - Part 1 · Edition 11.2002 → replaced by Edition 5.2005

Safety signs · Dimensions, viewing distances

DIN 4844 - Part 1 · Edition 2.2001 → replaced by Edition 11.2002

Safety signs · Dimensions, viewing distances

DIN 4844 - Part 1 · Edition 5.1980 → replaced by Edition 2.2001

Safety signs · Terms, principles and safety signs

DIN 4844 - Part 1 - Supplement 1 Edition 5.1980 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety marking · Safety mark V1

DIN 4844 - Part 1 - Supplement 2 Edition 5.1980 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety signs · Safety signs V2

DIN 4844 - part 1 - supplement 3 edition 5.1980 → replaced by DIN 4844 part 2 edition 2.2001

Safety signs · Safety signs V3

DIN 4844 - Part 1 - Supplement 4 Edition 5.1980 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety signs · Safety signs V4

DIN 4844 - Part 1 - Supplement 5 Edition 5.1980 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety signs · Safety signs V5

DIN 4844 - Part 1 - Supplement 6 Edition 5.1980 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety signs · Safety sign W1

DIN 4844 - Part 1 - Supplement 7 Edition 5.1980 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety signs · Safety sign W2

DIN 4844 - Part 1 - Supplement 8 Edition 5.1980 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety signs · Safety sign W3

DIN 4844 - Part 1 - Supplement 9 Edition 5.1980 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety signs · Safety sign W4

DIN 4844 - Part 1 - Supplement 10 Edition 5.1980 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety signs · Safety sign W5

DIN 4844 - Part 1 - Supplement 11 Edition 5.1980 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety signs · Safety sign W6

DIN 4844 - Part 1 - Supplement 12 Edition 5.1980 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety signs · Safety sign W7

DIN 4844 - part 1 - supplement 13 edition 5.1980 → replaced by DIN 4844 part 2 edition 2.2001

Safety signs · Safety sign W8

DIN 4844 - Part 1 - Supplement 14 Edition 5.1980 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety signs · Safety sign W9

DIN 4844 - Part 1 - Supplement 15 Edition 5.1980 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety signs · Safety sign W10

DIN 4844 - part 1 - supplement 16 · edition 5.1980 → replaced by DIN 4844 part 2 edition 2.2001

Safety signs · Safety signs G1

DIN 4844 - Part 1 - Supplement 17 Edition 5.1980 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety signs · Safety sign G2

DIN 4844 - Part 1 - Supplement 18 Edition 5.1980 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety signs · Safety sign G3

DIN 4844 - Part 1 - Supplement 19 Edition 5.1980 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety signs · Safety sign G4

DIN 4844 - Part 1 - Supplement 20 Edition 5.1980 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety signs · Safety sign G5

DIN 4844 - Part 1 - Supplement 21 Edition 5.1980 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety signs · Safety sign G6

DIN 4844 - Part 1 - Supplement 22 Edition 5.1980 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety signs · Safety signs R1

DIN 4844 - Part 1 - Supplement 23 Edition 5.1980 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety signs · Safety sign R2

DIN 4844 - Part 1 - Supplement 24 Edition 5.1980 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety signs · Safety signs R3a and R3b

DIN 4844 - Part 1 · Edition 2.1977 → replaced by Edition 5.1980

Safety signs · Principles

DIN 4844 - Part 2 - Amendment A1 · Edition 9.2015 → current

Graphic symbols - safety colors and safety signs · Registered safety signs · Amendment A1

DIN 4844 - Part 2 · Edition 12.2012 → current

Graphic Symbols - Safety Colors and Safety Signs · Registered Safety Signs

DIN 4844 - Part 2 - Amendment 1 Edition 5.2004 → replaced by DIN 4844 Part 2 Edition 12.2012

Safety signs · Representation of safety signs · Amendment A1

DIN 4844 - Part 2 · Edition 2.2001 → replaced by Edition 12.2012

Safety signs · Representation of safety signs

DIN 4844 - part 2 edition 11.1982 → replaced by edition 2.2001 and DIN 4844 part 1 edition 2.2001

Safety signs · Safety colors

DIN 4844 - Part 3 Edition 9.2003 → replaced by DIN ISO 23601 Edition 12.2010

Safety signs · Escape and rescue plans

DIN 4844 - part 3 edition 10.1985 → replaced by edition 9.2003 and DIN 4844 parts 1 and 2 edition 2.2001

Safety markings Supplementary specifications for DIN 4844 Part 1 and Part 2

DIN 4844 - Part 3 · Edition 1.1983 → replaced by Edition 10.1985

Safety markings Supplementary specifications for DIN 4844 Part 1 and Part 2

DIN 4844 - part 3 - supplement 1 edition 1.1983 → replaced by DIN 4844 part 2 edition 2.2001

Safety signs · Safety sign V 7

DIN 4844 - Part 3 - Supplement 2 Edition 1.1983 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety signs · Safety sign V 8

DIN 4844 - part 3 - supplement 3 edition 1.1983 → replaced by DIN 4844 part 2 edition 2.2001

Safety signs · Safety signs V 9

DIN 4844 - Part 3 - Supplement 4 Edition 1.1983 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety signs · Safety signs G 7

DIN 4844 - Part 3 - Supplement 5 Edition 1.1983 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety signs · Safety sign R 4

DIN 4844 - Part 3 - Supplement 6 Edition 1.1983 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety signs · Safety sign R 5

DIN 4844 - part 3 - supplement 7 · edition 1.1983 → replaced by DIN 4844 part 2 edition 2.2001

Safety signs · Safety sign R 6

DIN 4844 - Part 3 - Supplement 8 Edition 1.1983 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety signs · Safety sign R 7

DIN 4844 - Part 3 - Supplement 9 Edition 8.1989 → replaced by DIN 4844 Part 2 Edition 2.2001

Safety signs Safety sign V 10

DIN 4846 - Part 1 · Edition 12.1965 → withdrawn

Fabrics for acid protective clothing · Uncoated fabrics

DIN 4847 edition 9.1969 → replaced by DIN 32762 part 1 edition 3.1988

Coated fabrics and knitted fabrics for protective clothing

DIN 4848 edition 2.1970 → withdrawn

Driver's protective helmets · Terms, technical delivery conditions, test equipment, test head

DIN 4855 edition 9.2015 → current

Carbon layers · DLC layers · Description of the layer architecture

DIN 4870 · Edition 4.2016 → current

Leather · Determination of the cooking quality of wet-blue

DIN 4890 edition 2.1975 → current

Inch - Millimeter · Basics for the conversion

DIN 4892 Edition 2.1975 → current

Inch - Millimeter · Conversion tables

DIN 4893 Edition 3.1965 → current

Millimeter - inch · Conversion tables from 1 to 10,000 mm

DIN 4895 - Part 1 · Edition 11.1977 → current

Orthogonal coordinate systems · General terms

DIN 4895 - Part 2 Edition 11.1977 → current

Orthogonal coordinate systems · Differential operators in vector analysis

DIN 4896 edition 9.1973 → current

Simple electrolyte solutions · Formula symbols

DIN 4897 edition 12.1973 → replaced by DIN 1304 part 3 edition 3.1989

Electrical power supply · Symbols

DIN 4898 edition 11.1975 → current

Use of the words dual, inverse, reciprocal, equivalent, complementary

DIN 4899 edition 9.1978 → current

Linear electric multi-port

DIN 4902 Edition 11.1972 → current

Industrial trucks · Hand vehicles and trailers, running gear · Symbols, names, explanations

DIN 4918 · Edition 4.2017 → current

Seamless drill pipes with threaded connection for cased holes

DIN 4918 edition 9.1989 → replaced by edition 4.2017

Seamless drill pipes with threaded connection for cased holes

DIN 4918 - Part 1 edition 12.1952 → replaced by DIN 4918 edition 9.1989

Seamless drill pipes for deep drilling and drilling for water

DIN 4918 - Part 4 Edition 8.1954 → replaced by DIN 4918 Edition 9.1989

Seamless drill pipes for deep drilling and drilling for water · Installation depths, maximum tensile forces

DIN 4919 edition 12.1952 → replaced by DIN 4918 edition 9.1989

Seamless drill pipes for exploration drilling and drilling for water; Pipe shoes, pipe shoe pipes

DIN 4920 Edition 7.1983 → withdrawn

Steel filter tubes for boreholes and piling wells with elongated holes and threaded connection DN 32 to DN 100

DIN 4920 · Edition 2.1955 → replaced by Edition 7.1983

Steel filter tubes for boreholes and ramming wells, with slotted holes and Whitworth pipe thread according to DIN 2999

DIN 4922 - Part 1 · Edition 2.1978 → current

Steel filter tubes for boreholes, with slot bridge perforation and bracket connection

DIN 4922 - Part 2 · Edition 4.1981 → current

Steel filter tubes for boreholes with threaded connection DN 100 to DN 500

DIN 4922 - Part 3 Edition 12.1975 → current

Steel filter tubes for boreholes · Flange connection, NW 500 to NW 1000

DIN 4922 - Part 4 Edition 10.1999 → current

Steel filter pipes for boreholes · With tensile push-in socket connection DN 100 to DN 500

DIN 4923 Edition 7.1972 → withdrawn

Wire mesh in well construction

DIN 4924 edition 7.2014 → current

Sands and gravel for well construction · Requirements and test methods

DIN 4924 edition 8.1998 → replaced by edition 7.2014

Sands and gravel for well construction · Requirements and tests

DIN 4924 edition 2.1972 → replaced by edition 8.1998

Filter sand and filter gravel for well filters

DIN 4924 · Edition 6.1955 → replaced by Edition 2.1972

Filter sand and filter gravel for well filters and water purification filters

DIN 4925 - Part 1 · Edition 9.2014 → current

Filter and solid wall pipes made of plasticizer-free polyvinyl chloride (PVC-U) for wells DN 35 to DN 100 with pipe thread

DIN 4925 - Part 1 · Edition 4.1999 → replaced by Edition 9.2014

Filter and solid wall pipes made of plasticizer-free polyvinyl chloride (PVC-U) for wells DN 35 to DN 100 with Whitworth pipe thread

DIN 4925 - Part 1 edition 11.1990 → replaced by edition 4.1999

Filter and solid wall pipes made of plasticizer-free polyvinyl chloride (PVC-U) for boreholes with cross slits and threads DN 40 to DN 100

DIN 4925 - Part 1 edition 9.1981 → replaced by edition 11.1990

Plastic filter tubes made of plasticizer-free polyvinyl chloride (PVC hard, PVC-U) for drilling wells, with cross slits and threaded connection DN 40 to DN 100

DIN 4925 - Part 2 Edition 9.2014 → current

Filter and solid wall pipes made of plasticizer-free polyvinyl chloride (PVC-U) for wells DN 100 to DN 200 with trapezoidal thread

DIN 4925 - Part 2 · Edition 4.1999 → replaced by Edition 9.2014

Filter and solid wall pipes made of plasticizer-free polyvinyl chloride (PVC-U) for wells DN 100 to DN 200 with trapezoidal thread

DIN 4925 - part 2 edition 11.1990 → replaced by edition 4.1999

Filter and solid wall pipes made of plasticizer-free polyvinyl chloride (PVC-U) for boreholes, with cross slits and threads DN 125 to DN 200

DIN 4925 - part 2 edition 10.1987 → replaced by edition 11.1990

Filter and solid wall pipes made of plasticizer-free polyvinyl chloride (PVC-U) for boreholes, with cross slits and threads DN 125 to DN 200

DIN 4925 - Part 2 · Edition 9.1981 → replaced by Edition 10.1987

Plastic filter tubes made of plasticizer-free polyvinyl chloride (PVC hard, PVC-U) for drilling wells, with cross slits and threaded connection DN 125 to DN 200

DIN 4925 - Part 3 · Edition 9.2014 → current

Filter and solid wall pipes made of plasticizer-free polyvinyl chloride (PVC-U) for wells DN 250 to DN 400 with trapezoidal thread

DIN 4925 - Part 3 · Edition 4.1999 → replaced by Edition 9.2014

Filter and solid wall pipes made of plasticizer-free polyvinyl chloride (PVC-U) for wells DN 250 to DN 400 with trapezoidal thread

DIN 4925 - part 3 edition 11.1990 → replaced by edition 4.1999

Filter and solid wall pipes made of plasticizer-free polyvinyl chloride (PVC-U) for boreholes, with cross slits and threads DN 250 to DN 400

DIN 4925 - Part 3 Edition 10.1987 → replaced by Edition 11.1990

Filter and solid wall pipes made of plasticizer-free polyvinyl chloride (PVC-U) for boreholes, with cross slits and threads DN 250 to DN 400

DIN 4925 - Part 3 Edition 9.1981 → replaced by Edition 10.1987

Plastic filter tubes made of plasticizer-free polyvinyl chloride (PVC hard, PVC-U) for boreholes, with transverse slots and threaded connection DN 250 to DN 400

DIN 4926 · Edition 12.2016 → current

Well heads made of steel - DN 300 to DN 1200

DIN 4926 edition 10.1995 → replaced by edition 12.2016

Well heads made of steel DN 400 to DN 1200

DIN 4927 Edition 10.1995 → current

Flanged riser pipes made of steel for pumping water - DN 50 to DN 200

DIN 4930 edition 10.2016 → current

Outer freezing pipes and connections for shaft construction · Dimensions and technical delivery conditions

DIN 4930 edition 6.1989 → replaced by edition 10.2016

Outer freezing pipes and connections for shaft construction · Dimensions and technical delivery conditions

DIN 4930 edition 9.1988 → replaced by edition 6.1989

Outer freezing pipes and connections for shaft construction · Dimensions and technical delivery conditions

DIN 4930 - Part 1 edition 10.1973 → replaced by DIN 4930 edition 9.1988

Pipes for freezing shaft construction · Dimensions and technical delivery conditions

DIN 4930 - Part 2 Edition 9.1973 → replaced by DIN 4930 Edition 9.1988

Pipes for freezer shaft construction · Thread for freezer outer pipe

DIN 4935 - Part 1 · Edition 6.2002 → current

Wrap wire filter tubes made of stainless steel for wells · DN 40 to DN 100 with continuous gap width and threaded connection

DIN 4935 - Part 2 · Edition 6.2002 → current

Wrap wire filter tubes made of stainless steel for wells DN 100 to DN 500 with continuous gap width and threaded connection

DIN 4935 - Part 3 · Edition 6.2002 → current

Wrap wire filter tubes made of stainless steel for wells · DN 500 to DN 1000 with continuous gap width and flange connection

DIN 4940 edition 2.1965 → withdrawn

Seamless drill pipes for water and rock drilling using the impact and core drilling method

DIN 4941 edition 1.1965 → withdrawn

Drill pipe threads for seamless drill pipes for water and rock drilling using the percussion and core drilling method

DIN 4942 edition 1.1999 → current

Threaded riser pipes made of steel for pumping water, DN 50 to DN 200

DIN 4943 Edition 9.2013 → current

Graphic representation and documentation of wells and groundwater measuring points

DIN 4943 edition 12.2005 → replaced by edition 9.2013

Graphic representation and documentation of wells and groundwater measuring points

DIN 4944 Edition 11.2007 → current

Closures for groundwater measuring points

DIN 4945 - Part 1 · Edition 12.2005 → current

Riser pipes with tensile push-in socket connection for pumping water · Pipes made of steel DN 50 to DN 200, plastic-coated

DIN 4945 - Part 2 · Edition 9.2006 → current

Riser pipes with tensile push-in socket connection for pumping water · Pipes made of stainless steel DN 50 to DN 200

DIN 4950 Edition 3.1962 → current

Hard metal cutting tips

DIN 4951 edition 9.1962 → current

Straight turning tools with cutting edges made of high-speed steel

DIN 4952 edition 9.1962 → current

Curved turning tools with cutting edges made of high-speed steel

DIN 4953 edition 9.1962 → current

Internal turning tool with cutting edges made of high-speed steel

DIN 4954 Edition 9.1962 → current

Inside corner turning chisel with cutting edges made of high-speed steel

DIN 4955 edition 9.1962 → current

Pointed turning chisel with cutting edges made of high-speed steel

DIN 4956 Edition 9.1962 → current

Wide turning tool with cutting edges made of high-speed steel

DIN 4960 edition 9.1962 → current

Stepped lathe chisel with cutting edges made of high-speed steel

DIN 4961 edition 9.1962 → current

Grooving lathe chisel with cutting edges made of high-speed steel

DIN 4963 Edition 9.1962 → current

Internal grooving lathe chisel with cutting edges made of high-speed steel

DIN 4964 - Part 1 Edition 9.1962 → current

Turning bits made of high-speed steel

DIN 4965 Edition 9.1962 → current

Curved corner turning chisels with cutting edges made of high-speed steel

DIN 4966 Edition 11.1961 → current

Tungsten carbide inserts for easy cuts

DIN 4967 - Part 1 edition 4.1987 → replaced by DIN ISO 6987 edition 7.2003

Indexable inserts made of carbide with rounded corners, with counterbore - normal clearance angle 7 °

DIN 4967 - Part 2 edition 11.1993 → replaced by DIN ISO 6987 edition 7.2003

Indexable inserts made of carbide with rounded corners, with counterbore - normal clearance angle 11 °

DIN 4968 Edition 3.1987 → current

Indexable inserts made of hard metal with rounded corners, without drilling

DIN 4968 edition 4.1980 → replaced by edition 3.1987

Indexable inserts made of hard metal, with rounded corners

DIN 4969 - Part 1 · Edition 11.1993 → current

Indexable inserts made of cutting ceramics with rounded corners, without drilling

DIN 4969 · edition 4.1980 → replaced by DIN 4969 part 1 edition 11.1993

Indexable inserts made from cutting ceramics, with rounded corners

DIN 4971 edition 10.1980 → 6.2017 withdrawn without replacement

Straight turning tool with carbide insert

DIN 4972 edition 10.1980 → 6.2017 withdrawn without replacement

Curved turning tool with carbide cutting plate

DIN 4973 edition 10.1980 → 6.2017 withdrawn without replacement

Inside turning tool with carbide insert

DIN 4974 edition 10.1980 → 6.2017 withdrawn without replacement

Inside corner turning chisel with carbide insert

DIN 4975 edition 10.1980 → 6.2017 withdrawn without replacement

Pointed turning chisel with carbide insert

DIN 4976 edition 10.1980 → 6.2017 withdrawn without replacement

Wide turning tool with carbide insert

DIN 4977 edition 10.1980 → 6.2017 withdrawn without replacement

Stepped face lathe chisel with carbide insert

DIN 4978 edition 10.1980 → 6.2017 withdrawn without replacement

Stepped corner turning tool with carbide insert

DIN 4980 edition 10.1980 → 6.2017 withdrawn without replacement

Stepped lathe chisel with carbide insert

DIN 4981 edition 10.1980 → 6.2017 withdrawn without replacement

Grooving lathe chisel with carbide insert

DIN 4982 edition 10.1980 → 6.2017 withdrawn without replacement

Turning tool with carbide insert · Overview, marking

DIN 4983 Edition 7.2004 → current

Tool holder with square shank and short tool holder for indexable inserts · Structure of the designation

DIN 4983 · Edition 6.1987 → replaced by Edition 7.2004

Tool holder with square shank and short tool holder for indexable inserts · Description

DIN 4983 edition 4.1980 → replaced by edition 6.1987

Tool holder with square shank and short tool holder for indexable inserts · Description

DIN 4984 - part 1 edition 7.2004 → replaced by DIN ISO 5610 part 1 edition 2.2015

Tool holder with square shank for indexable inserts · Overview, assignment and determination of dimensions

DIN 4984 - Part 1 · Edition 6.1987 → replaced by Edition 7.2004

Toolholder with square shank for indexable inserts · Overview; Assignment of the dimensions

DIN 4984 - Part 1 · Edition 4.1980 → replaced by Edition 6.1987

Tool holder with square shank for indexable inserts · Overview, assignment of dimensions

DIN 4984 - Part 2 Edition 6.1987 → replaced by DIN ISO 5610 Part 2 Edition 2.2015

Tool holder with square shank for indexable inserts · Form A

DIN 4984 - Part 2 · Edition 4.1980 → replaced by Edition 6.1987

Tool holder with square shank for indexable inserts · Form A

DIN 4984 - Part 3 Edition 6.1987 → replaced by DIN ISO 5610 Part 3 Edition 2.2015

Tool holder with square shank for indexable inserts · Form B

DIN 4984 - Part 3 · Edition 4.1980 → replaced by Edition 6.1987

Tool holder with square shank for indexable inserts · Form B

DIN 4984 - part 4 edition 7.2004 → replaced by DIN ISO 5610 part 4 edition 2.2015

Tool holder with square shank for indexable inserts · Form D

DIN 4984 - part 4 edition 6.1987 → replaced by edition 7.2004

Tool holder with square shank for indexable inserts · Form D

DIN 4984 - Part 4 · Edition 4.1980 → replaced by Edition 6.1987

Tool holder with square shank for indexable inserts · Form D

DIN 4984 - Part 5 Edition 6.1987 → replaced by DIN ISO 5610 Part 5 Edition 2.2015

Tool holder with square shank for indexable inserts · Form F

DIN 4984 - Part 5 · Edition 4.1980 → replaced by Edition 6.1987

Tool holder with square shank for indexable inserts · Form F

DIN 4984 - Part 6 Edition 6.1987 → replaced by DIN ISO 5610 Part 6 Edition 2.2015

Tool holder with square shank for indexable inserts · Form G

DIN 4984 - Part 6 · Edition 4.1980 → replaced by Edition 6.1987

Tool holder with square shank for indexable inserts · Form G

DIN 4984 - Part 7 Edition 7.2004 → replaced by DIN ISO 5610 Part 7 Edition 2.2015

Tool holder with square shank for indexable inserts · Form J

DIN 4984 - Part 7 · Edition 6.1987 → replaced by Edition 7.2004

Tool holder with square shank for indexable inserts · Form J

DIN 4984 - Part 7 · Edition 4.1980 → replaced by Edition 6.1987

Tool holder with square shank for indexable inserts · Form J

DIN 4984 - Part 8 Edition 6.1987 → replaced by DIN ISO 5610 Part 8 Edition 2.2015

Tool holder with square shank for indexable inserts · Form K

DIN 4984 - Part 8 · Edition 4.1980 → replaced by Edition 6.1987

Tool holder with square shank for indexable inserts · Form K

DIN 4984 - Part 9 Edition 7.2004 → replaced by DIN ISO 5610 Part 9 Edition 2.2015

Tool holder with square shank for indexable inserts · Form L

DIN 4984 - Part 9 · Edition 6.1987 → replaced by Edition 7.2004

Tool holder with square shank for indexable inserts · Form L

DIN 4984 - Part 9 · Edition 4.1980 → replaced by Edition 6.1987

Tool holder with square shank for indexable inserts · Form L

DIN 4984 - Part 10 Edition 6.1987 → replaced by DIN ISO 5610 Part 10 Edition 2.2015

Tool holder with square shank for indexable inserts · Form N

DIN 4984 - Part 10 · Edition 4.1980 → replaced by Edition 6.1987

Tool holder with square shank for indexable inserts · Form N

DIN 4984 - Part 11 Edition 6.1987 → replaced by DIN ISO 5610 Part 11 Edition 2.2015

Tool holder with square shank for indexable inserts · Form R

DIN 4984 - part 11 edition 4.1980 → replaced by edition 6.1987

Tool holder with square shank for indexable inserts · Form R

DIN 4984 - Part 12 Edition 7.2004 → replaced by DIN ISO 5610 Part 12 Edition 2.2015

Tool holder with square shank for indexable inserts · Form S

DIN 4984 - Part 12 · Edition 6.1987 → replaced by Edition 7.2004

Tool holder with square shank for indexable inserts · Form S

DIN 4984 - Part 12 · Edition 4.1980 → replaced by Edition 6.1987

Tool holder with square shank for indexable inserts · Form S

DIN 4984 - part 13 edition 6.1987 → replaced by DIN ISO 5610 part 13 edition 2.2015

Tool holder with square shank for indexable inserts · Form T

DIN 4984 - Part 13 · Edition 4.1980 → replaced by Edition 6.1987

Tool holder with square shank for indexable inserts · Form T

DIN 4984 - part 14 edition 7.2004 → replaced by DIN ISO 5610 part 14 edition 2.2015

Tool holder with square shank for indexable inserts · Form H

DIN 4984 - Part 14 · Edition 6.1987 → replaced by Edition 7.2004

Tool holder with square shank for indexable inserts · Form H

DIN 4984 - Part 15 Edition 7.2004 → replaced by DIN ISO 5610 Part 15 Edition 2.2015

Tool holder with square shank for indexable inserts · Form V

DIN 4985 - Part 1 Edition 7.2004 → current

Clamp holder type A for indexable inserts · Overview, assignment and determination of dimensions

DIN 4985 - Part 1 · Edition 4.1994 → replaced by Edition 7.2004

Short clamp holder type A, for indexable inserts · Overview; Assignment of the dimensions

DIN 4985 - Part 1 · Edition 1.1994 → replaced by Edition 4.1994

Short clamp holder type A, for indexable inserts · Overview, assignment of dimensions

DIN 4985 - Part 1 edition 7.1980 → replaced by edition 1.1994

Short clamp holder type A, for indexable inserts · Overview, assignment of dimensions

DIN 4985 - Part 2 Edition 8.1997 → current

Short clamp holder type A for indexable inserts · Form F

DIN 4985 - Part 2 · Edition 7.1980 → replaced by Edition 8.1997

Short tool holder type A, for indexable inserts · Form F

DIN 4985 - Part 3 Edition 8.1997 → current

Short clamping holder type A for indexable inserts · Form G

DIN 4985 - Part 3 · Edition 7.1980 → replaced by Edition 8.1997

Short clamping holder type A, for indexable inserts · Form G

DIN 4985 - Part 4 Edition 8.1997 → current

Short clamp holder type A for indexable inserts · Form J

DIN 4985 - part 4 edition 7.1980 → replaced by edition 8.1997

Short clamping holder type A, for indexable inserts · Form J

DIN 4985 - Part 5 Edition 8.1997 → current

Short clamping holder type A for indexable inserts · Form K

DIN 4985 - Part 5 Edition 7.1980 → replaced by Edition 8.1997

Short clamp holder type A, for indexable inserts · Form K

DIN 4985 - Part 6 Edition 8.1997 → current

Short clamping holder type A for indexable inserts · Form L

DIN 4985 - Part 6 Edition 7.1980 → replaced by Edition 8.1997

Short tool holder type A, for indexable inserts · Form L

DIN 4985 - Part 7 Edition 8.1997 → current

Short clamping holder type A for indexable inserts · Form R

DIN 4985 - Part 7 Edition 7.1980 → replaced by Edition 8.1997

Short tool holder type A, for indexable inserts · Form R

DIN 4985 - Part 8 Edition 8.1997 → current

Short clamp holder type A for indexable inserts · Form S

DIN 4985 - Part 8 Edition 7.1980 → replaced by Edition 8.1997

Short clamping holder type A, for indexable inserts · Form S

DIN 4985 - Part 9 Edition 8.1997 → current

Short clamping holder type A for indexable inserts · Form T

DIN 4985 - Part 9 Edition 7.1980 → replaced by Edition 8.1997

Short tool holder type A, for indexable inserts · Form T

DIN 4985 - Part 10 Edition 8.1997 → current

Short clamping holder type A for indexable inserts · Form U

DIN 4985 - Part 10 Edition 7.1980 → replaced by Edition 8.1997

Short clamping holder type A, for indexable inserts · Form U

DIN 4985 - Part 11 Edition 8.1997 → current

Short clamping holder type A for indexable inserts · Form W

DIN 4985 - Part 11 Edition 7.1980 → replaced by Edition 8.1997

Short tool holder type A, for indexable inserts · Form W

DIN 4985 - Part 12 Edition 8.1997 → current

Short clamp holder type A for indexable inserts · Form Y

DIN 4985 - Part 12 Edition 7.1980 → replaced by Edition 8.1997

Short tool holder type A, for indexable inserts · Form Y

DIN 4987 - Part 1 Edition 3.1987 → replaced by DIN ISO 1832 Edition 11.2005

Designation and tolerances of the indexable inserts · Designation

DIN 4987 - Part 2 Edition 3.1987 → replaced by DIN ISO 1832 Edition 11.2005

Designation and tolerances of the indexable inserts · Tolerance classes, limit dimensions

DIN 4987 edition 3.1981 → replaced by DIN 4987 parts 1 and 2 edition 3.1987

Indexable inserts · Designation

DIN 4988 Edition 7.2004 → current

Indexable inserts made of hard metal with rounded corners, with cylindrical bore

DIN 4988 · edition 4.1987 → replaced by edition 7.2004

Indexable inserts made of hard metal with rounded corners, with cylindrical bore

DIN 4988 edition 11.1980 → replaced by edition 4.1987

Indexable inserts made of hard metal, with cylindrical bore, with rounded corners

DIN 4988 · edition 4.1980 → replaced by edition 11.1980

Indexable inserts made of hard metal, with cylindrical bore, with rounded corners

DIN 4990 edition 7.1972 → replaced by DIN ISO 513 edition 6.1992

Machining application groups for hard metals

DIN 4990 edition 7.1966 → replaced by edition 7.1972 and DIN 4982 edition 10.1980

Main machining groups and application groups for hard metals as well as marking of hard metal turning tools

DIN 4990 edition 4.1959 → replaced by edition 7.1966

Main machining groups and application groups for hard metals as well as marking of hard metal turning tools

DIN 4990 edition 5.1942 → replaced by edition 4.1959

Guidelines for marking hard metal tools

DIN 4991 edition 4.2006 → current

Business forms · Framework samples for commercial papers · Inquiry, offer, order / order change, order response, delivery note and invoice

DIN 4991 edition 8.2003 → replaced by edition 4.2006

Business forms · Framework samples for commercial papers · Inquiry, offer, order / order change, order response, delivery note and invoice

DIN 4991 edition 9.1992 → replaced by edition 8.2003

Business forms · Frame samples for commercial papers · Inquiry, offer, order, order acceptance, delivery note / delivery note and invoice

DIN 4991 edition 9.1969 → replaced by edition 9.1992

Forms in supplier traffic · Invoice

DIN 4992 edition 9.1969 → replaced by DIN 4991 edition 9.1992

Forms in supplier traffic · Purchase order (order)

DIN 4993 edition 9.1969 → replaced by DIN 4991 edition 9.1992

Forms in supplier traffic · Order acceptance (order confirmation)

DIN 4994 edition 9.1969 → replaced by DIN 4991 edition 9.1992

Forms in supplier traffic · Delivery note / delivery note

DIN 4998 · Edition 6.1972 → withdrawn

Draft sheets for forms

DIN 4999 Edition 10.1973 → current

Pads and carbonless books

See also

• List of DIN standards

swell

• Beuth Verlag - Product search
• Beuth Verlag website - search for historical documents (registration required)