Snowboarding

Snowboarder in a half-pipe

Snowboarder trail entry

Snowboarding is a boardsport on snow similar to skiing, but inspired by surfing and skateboarding. Snowboarding is an increasingly common winter sport throughout the world where participants attach a wooden board to their feet and slide down a snow-covered mountain.

A snowboarder's equipment consists of a snowboard, snowboarding boots, bindings to attach their boots to the board, as well as snowboarding-specific winter clothing. Snowboarding became a Winter Olympic Games medal-eligible sport in 1998. Other events that focus on snowboarding are the annual European and U.S. Open Snowboarding Championships and the Winter X-Games. These events are hosted by various winter resorts in the United States, Canada, and Europe.

History

The snowboard evolved from early pioneering work by people such as Sherman Poppen (who invented the "Snurfer" in his North Muskegon, Michigan home), Tom Sims, and Jake Burton. Jake Burton is the founder of Burton Snowboards, one of the largest, and most established snowboard companies in the world. In the early 1980's, snowboard companies began emerging across the country. Burton, Sims, Winterstick, and Avalanche snowboards originated from other parts of the country. In the early 1980's films by Warren Miller began to feature clips of snowboarders boosting the popularity of the sport among the skiing community. It wasn't until the mid 1980s when snowboarding exploded into the main stream when the first snowboard magazine, "Absolutely Radical", hit the racks, soon to be followed by "International Snowboard Magazine". For more on the history of snowboarding, see www.snowboardingsukz.com this Snowboard History Timeline.BUT POPPEN REALLY SUCKS AT SNOWBOARDING HE MIGHT INVENTED BUT HE SUCK

Disciplines

There are four primary sub-disciplines or sub-styles within snowboarding with each favoring a slightly different snowboard design.

Freeride

Freeriding is using the natural terrain of the mountain for recreation, without focusing on technical tricks or racing. Most snowboarders aspire to be freeriders and will explore the mountain through trees, in powder bowls or anywhere else they feel comfortable riding. Freeriding is also known as all-mountain snowboarding. A variant of freeriding focusing on extremely difficult lines is extreme snowboarding.

Freeride snowboarding, where the focus is on riding cleanly and enjoying the freedom to go and explore anywhere is influenced significantly by surfing. Many freeride purists attach an almost spiritual connotation to carving down the mountain.

Freestyle

Freestyle snowboarding is the practice of doing different kinds of tricks on a snowboard. Tricks can either occur on the ground (e.g. jibbing, bonking, grinding, pressing, buttering, ground spins etc.) or in the air (e.g. spins, flips, grabs). Freestyle snowboarders typically use shorter, softer boards and softer boots than other snowboarders, as the shorter board length reduces the weight and moment of inertia, making it easier to spin and maneuver, and the softer gear makes the board more forgiving to control for the particular demands of freestyle riding, such as slower speeds, high landing impacts, quick turns, and imperfect landings. Also, freestyle snowboards most likely have a true twin tip, in that the sidecut radius is equal on both sides of the board. This is important because many freestyle snowboarders are landing switch from how they hit their jumps or their tricks, and they need to be able to ride away with ease. Softer boots and boards also allow riders more flexibility in body movement and the ability to reach very convoluted or stretched out, stylish body positions (known as tweaking it).

Freestyle snowboarding is arguably the most popular discipline, and is certainly the focus of most of the lifestyle marketing in the snowboarding industry. Freestyle is probably most demanded because of the thrill. Most snowboarders are thrill seekers and love to do tricks in terrain parks, which has inherent risks. Freestyle snowboarding can be done almost anywhere that has snow.

Freestyle snowboarding is influenced greatly by skateboarding. Many ski resorts operate terrain parks which often simulate the urban skateboard environment, complete with handrails, funboxes, and machine-formed jumps.

Alpine

Main article: Alpine snowboarding

Alpine snowboarding is the practice of turning by carving the snowboard (such that the board is tracking along the edge of the board), as opposed to skidding the snowboard (where the board is traveling in a different direction than it is pointing). Both traditional snowboard racers (though not necessarily boardercross racers) and recreational carvers are alpine snowboarders.

Alpine riders use hard plastic snowboarding boots, which resemble ski boots, except that they tend to be less stiff in the ankles and have a shortened heel, to minimize hanging over the edge of the snowboard. They tend to angle their feet much more forward than other snowboarders, and so also ride narrower boards. Alpine boards are usually, but not always, longer and much stiffer than freeride boards, as the particular demands of carving usually require as much usable edge length as possible. The hard plastic boots stiffens the ankle joint up significantly, making it more difficult to make small ankle adjustments while making skid turns, but making the board much more stable and powerful at higher speeds and the much higher g-forces typically felt by an alpine snowboarder in carved turns.

An analogy made by some alpine enthusiasts is that freeride and freestyle snowboards are like dirt bikes, and alpine/carving snowboards are like road bikes. (Hence riding a freestyle snowboard on groomed slopes is like riding a dirtbike on a road track or what is called SuperMoto).

A common misconception is that alpine snowboarding necessitates riding very quickly or racing. In fact, the only real defining characteristic of alpine snowboarding is that alpine snowboarders turn often and very hard while engaging the board in a carve. Short slalom boards with very short sidecut radii, for example, are alpine boards but can only be carved at slow speeds.

Alpine snowboarding is significantly less popular than other kinds of snowboarding, especially in the United States.

Powder Riding

Powder, which occurs after a heavy snowstorm, is a specific type of snow that is very light, fluffy, and most likely deep. Powder is very famous for being the most fun and sometimes challenging ski and snowboarding, solely because it is so soft. The bad thing about powder is that is if it sits for too long it gets compacted and becomes much harder and sometimes even icy. Even though it is hard to categorize areas in terms of powder, Powder on the east coast (USA) is generally not as common or as good as the powder on the west (USA). Generally colder climates sport the lightest, driest powder, and countries like Japan are becoming known as powder havens.

In places where almost all of the runs are groomed, and powder is a rare find, you must venture into the tree trails. Powder makes for much smoother turns and in all smoother riding. Powder also makes for softer landings and reduced chances of injury compared to man made terrain parks, though landing in deep snow can take some practice. The only bad part of skiing or snowboarding in powder is that if you fall, sometimes it can be very difficult to get yourself out of the very deep powder snow. See also link title

Backcountry

File:Impact1 300dpi.jpg

Andrew Hardingham drops a giant cliff in Alberta, Canada during the filming of Warren Miller’s latest movie, Impact.

This type of boarding started out with fresh powder-craving snowboarders who, most likely, didn't have the cash to spend at crowded upscale ski parks. In fact, before snowboarding was allowed at resorts, this was the only form of snowboarding; Jake Burton, one of the original pioneers of snowboarding, never even considered resorts; backcountry was what he envisioned as the future of snowboarding. Today, backcountry snowboarding is often for those who have enough cash to afford trips to Alaska or the mountain ranges of the West, to ride outside resorts. Donning snowshoes or a split-board with skins, the backcountry snowboarder cuts a new path up the side of the mountain in search of the very best vistas and untouched snow. Some of those more cash-endowed riders can even hire snowcats or helicopters to take them where they want to go; this is known as catboarding or heliboarding respectively.

The split-board is exactly that, a snowboard cut right down the middle. When apart, the two halves can be used like cross-country skis to shuffle up the hill. At the top of the run, the halves are recombined, and the bindings rotated back into their sideways positions. Those that don't make use of the split-board will usually strap their board to their back and hike with snowshoes.

Snowboarders also use snowmobiles to ride in the backcountry. If the hill is too steep a snowmobile may not make it up the hill. Often snowboarders use snowmobiles to make jumps into the powder.

Safety is key when hiking and riding in the backcountry, especially after a fresh 'dump' of powder. Snow can be extremely unstable, often leading to avalanches. Backcountry riders are advised to take extreme caution in all conditions, to carry avalanche equipment including a probe, beacon, and shovel, and never to ride alone in the backcountry. Avalanche equipment can be purchased or rented at outdoor equipment stores. Courses in avalanche safety are also available.

Construction

The various components of a snowboard are:

• a core: the bulk of a snowboard, the core is the interior of the snowboard. It is typically comprised of a solid material, normally either wood, foam, or some composite plastic. The properties of the core directly affect important characteristics of the board, such as flexibility and weight.
• a base: this is the bottom of the board which is made of a graphitic material that is saturated with a wax that creates a very quick smooth, hydrophobic surface. Because the base of the board comprises the bulk of the board's interaction with the snow, it is important that it be as slippery with respect to the snow as possible. For this reason, different base waxes are available for different snow conditions. If the board is damaged, a new base pattern can be stone-ground into the board. If the base becomes significantly damaged, the board may become sluggish, or if the damage is deep enough, it may even weaken the core.
• an edge: a strip of metal, tuned normally to just less than 90-degrees, that runs the length of either side of the board. This sharp edge is necessary to be able to produce enough friction to ride on ice, and the radius of the edge directly affects the radius of carving turns, and in turn the responsiveness of the board. Kinking, rusting, or general dulling of the edge will significantly hinder the ability for the edge to grip the snow, so it is important that this feature is maintained.
• there is also the "dgb" which is wood that goes in different directions over the core of the board to increase control. This construction feature is not included in all board designs.

For a more detailed description, see Board construction.

Instruction

Snowboard instruction is available at almost every ski resort from certified snowboard instructors. Professional instruction is a good way to learn proper technique, safety policies, mountain etiquette and resort rules.

Snowboard lessons, as with ski lessons, can either be group or private lessons. Group lessons are often cheaper, but often have a high student-teacher ratio, resulting in less individual attention. Private lessons can be taught one-on-one or between a small group. Private lessons are often far more expensive than group, as it is the snowboarding analogue of being privately tutored. The rapport developed between an instructor and a student who returns for multiple lessons is the real benefit derived from private lessons; one is taught better by a teacher who knows them, and a student is more likely to heed the advice of someone they trust.

Typically, beginner snowboard lessons focus on very basic, common snowboarding skills. The first lesson often begins with basic safety policies, stretching, and learning to fall, then progresses to snowboarding with one foot on the board (particularly skating and J-turns). Then students learn how to turn and stop with both feet in. Other important beginner skills to learn are the falling leaf technique, side-slipping, and lift procedures. More advanced techniques that are taught in later lessons are linking turns, edge control, weight distribution, edge pressure, and eventually carving. As students progress in ability they can seek out specialized instruction in areas such as terrain park skills (jumps, rails, and pipes), mogul technique, off-piste riding, powder riding, and racing.

Safety

Wearing safety gear is highly recommended. The body parts most affected by injuries are the wrists, the tailbone and the head. Useful safety gear includes wrist guards, padded or protected snowboard pants and a helmet.

Padding can be useful on other body parts like hips, knees, spine and shoulders. Padding can be specialized for snowboarding, or it can cross sports. For example, knee pads used for volleyball can be useful for snowboarding. They can be useful for the many times that a snowboard rider may wish to rest on the knees, such as after coming to a stop.

General safety tips for winter sports, alpine conditions and skiing should also be respected.

Snowboarding vs skiing

There is a known culture clash between skiers and snowboarders. The culture clash has shown significant signs of diminishing as more and more snow sport enthusiasts are choosing to snowboard and more parks/resorts are allowing it.

Videos and movies

Snowboard videos have become a huge part of the sport. Each season, many different snowboard films are released, usually in September. Production companies work all year developing these videos.

On December 2, 2005, a feature film was released called "First Descent", which documented the history of the sport as well as its modern day stars.

Video Podcasts

Regularly updated video content that is available for download via any aggregator.

Snowflix - Your video iPod-ready weekly snow fix from the Alps.

Ridertech.com - Skiing and snowboarding video blog from the Pacific Northwest.

Northeast Skiing Video Podcast - Video podcast about skiing in the Northeast of the US.

High Cascade - Located on Mt. Hood, HCSC has been the world's leading summer camp since 1989.

Effective Edge TV - Video podcast that covers all aspects of snowboarding from music, resorts, and new products.

shralp! - Die aktuelle Snowboard-Wochenschau auf Deutsch.

New developments

The combination of kiteboarding technology with snowboarding has led to the creation of a new sport, snowkiting. Using the pull of the wind, snowkiters are able to make massive jumps and travel uphill.

See also

• Alpine snowboarding
• Category:Snowboarders
• Skiing
• Skwal
• Monoskiing
• Boarder Cross
• Skateboarding
• Surfing
• Snowkiting

External links

• U Snowboard Association
• Snowboarding.com - Several interesting Howto's for Snowboarders
• Snowboard City - A snowboard trick tips site
• Transworld Snowboard History Timeline
• Grays on Trays -Information about snowboarding for and by adults 30+ years old and up
• World Snowboard Guide, Information and reviews on over 1000 resorts across the world
• CERN Ski Club Snowboard Tutor - Snowboarding tips and techniques
• "Three Revolutions Have Equaled a Transformation in Snowboarding". December 27, 2005. {{cite news}}: Check date values in: |date= (help); Unknown parameter |org= ignored (help)
• Transworld Snowboarding
• Snowboarder Magazine

References

• Hart, Lowell (1997). The Snowboard Book: A Guide for All Boarders. W.W. Norton & Company. ISBN 0-393-32692-0