ČSD series T 212.0
ČSD series T 212.0 ČD / ŽSR series 702 |
|
---|---|
Number: | 307 |
Manufacturer: |
ČKD Turčianske strojárne np Martin |
Year of construction (s): | 1967-1971 |
Axis formula : | B. |
Gauge : | 1435 mm ( standard gauge ) |
Length over buffers: | 7,220 mm |
Length: | 6,000 mm |
Width: | 2,600 mm |
Total wheelbase: | 2,800 mm |
Smallest bef. Radius: | 60 m |
Service mass: | 24.0 t |
Friction mass: | 24 t |
Wheel set mass : | 12.0 t |
Top speed: | 40 km / h |
Installed capacity: | 147 kW |
Driving wheel diameter: | 1,000 mm |
Motor type: | Tatra 930-51 |
Motor type: | 12-cylinder 4-stroke diesel |
Rated speed: | 1,800 rpm |
Power transmission: | mechanically |
Brake: | Handbrake traction brake Westinghouse |
The vehicles of the ČSD series T 212.0 (from 1988: series 702 ) were diesel-mechanical shunting locomotives of the Czechoslovak State Railways (ČSD).
history
In the second half of the 1960s this locomotive was developed by ČKD and in 1967–1971 by Turčianske strojárne n. P. built in Martin . The locomotive has been developed from the T 211.0 and, like it, is intended for easy shifting of stations, shunting in depots and works railways.
In addition to the ČSD, this locomotive was delivered in various designs for various companies and for export (GDR, China, Bulgaria, Egypt, USSR, Poland, Romania, Albania, Iraq, India and Hungary).
technical features
The machine is powered by a twelve-cylinder, four-stroke TATRA 930-51 diesel engine. The control works as a direct control from the throttle lever to the diesel injection pump. The M 150-4 mechanical four-speed gearbox from ČKD works according to the Mylius system . The gears are preselected and the power transmission in the respective gear is ensured via claws. The transmission of the torque to the axles is ensured by cardan shafts.
The locomotive has an indirect brake based on the Westinghouse system , a direct-acting auxiliary brake and a handbrake. The indirect brake is controlled by the Škoda N / O brake valve , and two additional brake valves are available in the driver's cab for the direct-acting brake. Both axles of the locomotives are braked with block brakes on both sides . The handbrake, which is chain-driven by a handwheel on the rear of the driver's cab, acts on both axles. The compressed air required for the brake and auxiliary air system is compressed by the Atmos W 115/80 compressor and stored in 2 main air tanks of 300 l (p = 8 bar) and an auxiliary air tank of 25 l.
Narrow gauge variant
The TU 29.1 series , which is now referred to as the 702.9 series , was created through reconstruction to the 760 mm and 1000 mm gauge .
See also
- List of locomotive and multiple unit series of the ČSD
- List of the ČD locomotive and multiple unit series
- List of locomotive and multiple unit series of the ŽSR