EN 50173
![]() |
DIN EN 50173 |
---|---|
Area | Information technology |
title | Application-neutral communication cable systems |
Brief description: | Service-independent, universally applicable cabling to support information and communication technology network applications |
Latest edition | 2018-10 |
ISO | ISO / IEC 11801 |
The series of standards EN 50173 Information technology - application- neutral communication cable systems describes in six parts a service-independent, universally applicable cabling to support information and communication technology network applications. Both fiber optic and copper as well as symmetrical and asymmetrical cabling are described.
In the introductory article of the standards, it is shown that the standard was originally designed for office buildings. The basis of the application-neutral communication cable systems is a uniform topology, classification of transmission routes with defined properties and a uniform interface for connecting the end devices. With certain modifications, these basic properties can also be transferred to other areas of application. For this reason, other building uses were described in other parts: industrial locations (part 3), residential buildings (part 4) and data centers (part 5).
The international standard ISO / IEC 11801 is largely identical to the European standard.
Composition of the parts
The last revision of EN 50173 was completed by CENELEC / TC 215 in 2018. Like ISO / IEC 11801, the series appears in six parts. When developing the series of standards, care was taken to ensure that those requirements and properties that apply to several or all types of buildings are only defined once in Part 1. To implement an application-neutral communication cable system in a certain environment (type of building, location), parts 2, 3, 4, 5 and 6 must therefore always be used together with part 1.
The six parts and supplements of DIN EN 50173 Information Technology - Application- neutral communication cable systems are made up as follows:
Document number | Title of the part | replaced | released | description |
---|---|---|---|---|
DIN EN 50173-1 VDE 0800-173-1 | Part 1: General requirements | DIN EN 50173-1: 2011-09 | 2018-10 | General requirements for twisted pair cables and fiber optic cables |
DIN EN 50173-1 supplement 1 | Part 1, Bbl 1: Cabling guide to support 10 GBASE-T | - | 2008-05 | Guide to supporting 10 GBASE-T cabling |
DIN EN 50173-2 VDE 0800-173-2 | Part 2: office areas | DIN EN 50173-2: 2011-09 | 2018-10 | Cabling of commercial (company) buildings |
DIN EN 50173-3 VDE 0800-173-3 | Part 3: Industrial areas | DIN EN 50173-3: 2011-09 | 2018-10 | Cabling of industrial buildings with tasks such as automation , process control and monitoring |
DIN EN 50173-4 VDE 0800-173-4 | Part 4: Apartments | DIN EN 50173-4: 2013-04; VDE 0800-173-4: 2013-04 |
2018-10 | Cabling for residential buildings including CATV / SATV (1200 MHz) |
DIN EN 50173-4 supplement 1 | Part 4, Bbl 1: Realization of RuK network applications with cabling according to EN 50173-4 | - | 2011-06 | Guide to the implementation of RuK network applications |
DIN EN 50173-4 VDE 0800-173-4 Supplement 2 | Part 4, Bbl 2: Infrastructure of home cabling up to 50 m in length for the simultaneous or non-simultaneous provision of network applications | - | 2013-04 | Guide to the infrastructure of home cabling up to 50 m in length |
DIN EN 50173-5 VDE 0800-173-5 | Part 5: Data Center Areas | DIN EN 50173-5: 2013-04; VDE 0800-173-5: 2013-04 |
2018-10 | Cabling of high-performance networks in data centers |
DIN EN 50173-6 VDE 0800-173-6 | Part 6: Distributed building services | DIN EN 50173-6: 2014-05; VDE 0800-173-6: 2014-05 |
2018-10 | Building automation and IOT |
Interaction with other standards
After EN 50173 was published for the first time, it became clear that in order to implement cabling, in addition to the pure requirements for structure and transmission properties, also the description of the aspects of building planning, specification of cabling, planning and installation as well as quality assurance, including the specifications for acceptance of the installation , are necessary. As a result, the EN 50174 series of standards for specification and quality assurance, installation planning and installation practices was published in 2000 and 2003 respectively. Against this background, the interaction of the two series of standards EN 50173 and EN 50174 becomes apparent. Together, they describe the entire cabling process through to operation and support the planner or installer through all phases. The unity of the two standards is underlined by the requirement of EN 50173-x that conformity with this series of standards is only given if the requirements of the EN 50174 series of standards are also complied with in the practical implementation of the communication cable system. In addition to this, the EN 50310 standard for ensuring electromagnetic compatibility (EMC) and the EN 61935-1 standard for the requirements for the metrological evaluation of installed copper cabling were created in 2000. In 2006, ISO / IEC 14763-3 stipulated the metrological evaluation of installed fiber optic cables.
See also
- EN 50174 Information technology - Installation of communication cabling
- ISO / IEC 11801 Information technology - Generic cabling for customer premises
- Structured cabling
- Twisted pair cable
literature
- Y. Engels, K. Hüdepohl, A. Oehler, R. Schmidt, D.
Wilhelm: Anwendungsneutrale Kommunikationskabelanlagen nach EN 50173 und EN 50174. VDE Verlag, 2019, ISBN 978-3-8007-4517-3.
Individual evidence
- ↑ a b c DIN EN 50173-1: 2018-10; VDE 0800-173-1. Information technology - Application-neutral communication cable systems - Part 1: General requirements. Beuth Verlag, accessed on June 19, 2020 .
- ↑ ISO / IEC 11801. In: itwissen.info. DATACOM Buchverlag GmbH, accessed on June 19, 2020 .
- ↑ Note on the series of standards DIN EN 50173 (VDE 0800-173). In: dke.de. November 17, 2017, accessed June 19, 2020 .
- ↑ DIN EN 50173-1 supplement 1: 2008-05. Information technology - application-neutral communication cable systems - supplement 1: cabling guide to support 10 GBASE-T. Beuth Verlag, accessed on June 21, 2020 .
- ↑ DIN EN 50173-2: 2018-10; VDE 0800-173-2. Information technology - Application-neutral communication cable systems - Part 2: Office areas. Beuth Verlag, accessed on June 20, 2020 .
- ↑ DIN EN 50173-3: 2018-10; VDE 0800-173-3. Information technology - Application-neutral communication cable systems - Part 3: Industrially used areas. Beuth Verlag, accessed on June 20, 2020 .
- ↑ DIN EN 50173-4: 2018-10; VDE 0800-173-4. Information technology - Application-neutral communication cable systems - Part 4: Apartments. Beuth Verlag, accessed on June 20, 2020 .
- ↑ DIN EN 50173-4 supplement 1: 2011-06. Information technology - application-neutral communication cable systems - supplement 1: cabling guide to support 10 GBASE-T. Beuth Verlag, accessed on June 21, 2020 .
- ↑ DIN EN 50173-4 supplement 2: 2013-04; VDE 0800-173-4 supplement 2: 2013-04. Information technology - Application-neutral communication cable systems - Part 4: Apartments; Supplement 2: Infrastructure of home cabling up to 50 m in length for the simultaneous or non-simultaneous provision of network applications. Beuth Verlag, accessed on June 21, 2020 .
- ↑ DIN EN 50173-5: 2018-10; VDE 0800-173-5. Information technology - Application-neutral communication cable systems - Part 5: Data center areas. Beuth Verlag, accessed on June 20, 2020 .
- ↑ DIN EN 50173-6: 2018-10; VDE 0800-173-6. Information technology - Application-neutral communication cable systems - Part 6: Distributed building services. Beuth Verlag, accessed on June 20, 2020 .
- ↑ Y. Engels, K. Hüdepohl, A. Oehler, R. Schmidt, D. Wilhelm: Application-neutral communication cable systems according to EN 50173 and EN 50174 . VDE Verlag, 2019, ISBN 978-3-8007-4517-3 , pp. 39 .