Carl-Alexander Graubner

from Wikipedia, the free encyclopedia

Carl-Alexander Graubner (* 1957 ) is a German civil engineer for building construction and civil engineering and since 1996 professor at the Technical University of Darmstadt . Since 2007 he has been a member of the TU Darmstadt University Assembly and since 2012 chairman of the mirror committee “Masonry” at DIN.

biography

Carl-Alexander Graubner studied civil engineering at the Technical University of Munich from 1977 to 1981, specializing in structural engineering. He then worked from 1982 to 1988 as a research assistant at the Institute for Solid Construction at the Technical University of Munich , where he received his doctorate in early 1989. From 1989 to 1994, he worked in the construction industry as a technical department manager at Philipp Holzmann / Held & Francke Bau AG in Munich. During this time he was involved in the planning of a number of large building projects, industrial and bridge construction. From him u. a. the static calculation of a wide-span integral prestressed concrete bridge over the Rhine-Main-Danube Canal near Berching in Bavaria, which has attracted worldwide attention. Furthermore, he and his planning team were also responsible for the structural design of the BASF ethylene factory in Antwerp. From 1994 to 1996 he ran his own engineering office in Munich. B. the draft and the cost estimate for the planned Transrapid route from Hamburg to Berlin. Graubner has been a partner and member of the management team at KHP König und Heunisch Planungsgesellschaft mbH in Frankfurt since 2001 . As a test engineer for structural engineering, he has accompanied a large number of large projects in recent years, such as the MyZeil shopping center or the new building for the European Central Bank in Frankfurt. He is currently working on the major project FOUR , a new ensemble consisting of four high-rise buildings in Frankfurt, as well as various new buildings at Frankfurt Airport . In 2009 he and partners founded Life Cycle Engineering Experts GmbH, which deals with sustainability consulting in the construction industry.

In 1996 Graubner was appointed full professor to the chair for solid construction at the Technical University of Darmstadt. He is currently the Managing Director of the Institute for Solid Construction and was a member of the university assembly from 2007 to 2017. He played a leading role in the development of the German Seal of Approval for Sustainable Building and has been advising various federal and state ministries on questions of sustainable building for many years. He is chairman of the standardization committee NA 005-06-01 “Masonry” at DIN and a member of several expert committees of the German Institute for Building Technology. He also represents German interests in European standardization committees in the field of masonry construction. Since 2018 he has been Deputy Chairman of the German Committee for Masonry (DAfM). Graubner is co-editor of the book series “Mauerwerksbau aktuell” and a member of the editorial board of the magazine “Mauerwerk”.

Fonts

  • together with R. Rast: Masonry Construction Practical Guide for Structural Planners. Beuth Verlag, Berlin 2017
  • together with R. Geiger, V. Angelmaier, J. Kohoutek: Intregrale Brücken . Ernst & Sohn Verlag, Berlin 2017
  • together with M. Schmitt: Kalksandstein - Statik Handbuch 3rd edition. Bundesverband Kalksandsteinindustrie eV, Hanover [Hrsg.], Verlag Bau + Technik GmbH, Hanover 2014
  • together with C. Alfes, W. Brameshuber, W. Jäger, W. Seim: The Eurocode 6 for Germany - annotated version. German Society for Masonry and Housing Construction eV, Working Group for Contemporary Construction eV, Central Association of German Building Industry, Federal Association of Testing Engineers for Building Technology eV, Association of Consulting Engineers (VBI, publisher) Beuth Verlag, Berlin, Verlag Ernst & Sohn, Berlin 2013
  • together with W. Rossner: Prestressed concrete structures. Part 4: Dimensioning examples according to Eurocode 2. Ernst & Sohn Verlag, Munich 2012
  • together with W. Rossner: Prestressed concrete structures. Part 3: Dimensioning examples according to DIN 1045-1 and DIN-Fachbericht 102. Ernst & Sohn Verlag, Munich 2005
  • together with K. Hüske: Sustainability in Building: Basics - Instruments - Examples. Ernst & Sohn Verlag, Munich 2003
  • together with W. Rossner: Prestressed concrete structures. Part 2: Dimensioning examples according to Eurocode 2. Ernst & Sohn Verlag, Munich 1997
  • together with W. Rossner: Prestressed concrete structures. Part 1: Dimensioning examples according to DIN 4227. Ernst & Sohn Verlag, Munich 1992
  • together with D. Müller, N. Tran: Stochastic simulation of the payloads in buildings . In: Diversity in solid construction - Festschrift for the 65th birthday of Prof. Dr.-Ing. Jürgen Schnell . Verlag Ernst & Sohn, Berlin 2018
  • Masonry construction (DIN EN 1996) . In: Construction tables for engineers , 22nd edition. Bundesanzeiger Verlag, Cologne 2016
  • together with M. Schmitt, V. Förster: load-bearing capacity tables for unreinforced masonry according to DIN EN 1996-3 / NA . In: Masonry construction - practical handbook for structural engineers . Bauwerk Beuth Verlag, Berlin 2017
  • together with T. Proske, S. Hainer, M. Rezvani: Eco-Friendly Concretes With Reduced Water and Cement Content: Mix Design Principles and Experimental Tests . In: Handbook of Low Carbon Concrete (Elsevier), pp. 63-87. 2017
  • together with M. Six, J. Zeier: Prestressed concrete construction. In: Reinforced Concrete Construction Current 2015 - Practical Guide. J. Hegger, P. Mark . [Ed.]. Bauwerk Beuth Verlag, Berlin 2015
  • together with P. Wörner, A. Müller, M. Fischer: Well meant - also well done? The sustainability of the German energy transition on the test bench , In: Energiewirtschaftliche Tagesfragen , Volume 68, Issue 6, pp. 40–44. EW Medien und Kongresse GmbH, Berlin 2018
  • together with V. Förster: Load-bearing capacity of unreinforced concrete compression members with biaxially eccentric loading , In: Beton- und Stahlbetonbau , Volume 2, pp. 136–146. Ernst & Sohn, Berlin 2018
  • together with W. Neufert, I. Reuken, C. Müller, S. Palm, T. Proske, M. Rezvani: Performance of clinker-efficient cements with blast furnace slag and limestone. In: Beton , Issue 3. 2017
  • together with C. Weißmann, T. Hong: Analysis of heating load diversity in German residential districts and implications for the application in district heating systems , In: Energy and Buildings (Elsevier), Vol. 139, pp. 302-313. Amsterdam, 2017
  • together with S. Palm, T. Proske, M. Rezvani, S. Hainer, M. Christoph: Cements with high limestone content - Mechanical properties, durability and ecological characteristics of the concrete , In: Construction and Building Materials , Vol. 119, Pp. 308-318. 2016
  • together with V. Förster: Simplified design concept for slender masonry walls - Simplified stability analysis of masonry walls at risk of buckling , In: Mauerwerk 19 , No. 6. Verlag Ernst & Sohn, Berlin, 2015
  • together with M. Schmitt, V. Förster: Minimum load on masonry walls - a realistic view , In: Mauerwerk 19, issue 4. Verlag Ernst & Sohn, Berlin, 2015
  • together with N. Tran, J. Kohoutek: Shear force resistance of reinforced concrete components without shear force reinforcement . In: Beton- und Stahlbetonbau 110 , Heft 4, pp. 244-253. Verlag Ernst & Sohn, Berlin 2015
  • together with B. Freund, T. Proske: Experimental investigations and numerical verification of the fresh concrete pressure in inclined formwork systems . In: Beton- und Stahlbetonbau 109 , Heft 11, pp. 803–811. Verlag Ernst & Sohn, Berlin 2014

Web links

Individual evidence

  1. ↑ cf. Weblink (massivbau.tu-darmstadt.de)
  2. ↑ http://www.nabau.din.de/sixcms_upload/media/2377/2013_jahresbericht_NABau_web.pdf
  3. ↑ History - khp-ing.de
personal data
SURNAME Graubner, Carl-Alexander
BRIEF DESCRIPTION German civil engineer for solid construction
DATE OF BIRTH 1957