List of standards DIN 4000 to DIN 4499
The list of standards DIN 4000 to DIN 4499 lists all current standards and many historical standard editions in the number range 4000 to 4499.
DIN - German Institute for Standardization e. V. - is the national standardization organization of the Federal Republic of Germany based in Berlin .
Explanations of the list
- DIN-EN standards, DIN-EN-ISO standards, DIN-ISO standards, preliminary standards and draft standards are not listed in this list.
- The term “sheet” used in older standard editions has been uniformly transferred to “part”.
- The date of issue is indicated next to the standard number. Edition 9.1981 means that the standard was published in September 1981.
- Cross edition: If the date of issue is appended with an x, for example edition 9.1949x, the standard has only been changed slightly and remains valid.
- Unless otherwise noted, the withdrawal date of an old standard is the same as the issue date of the replacing standard (s).
- The entry "→ current" means that the standard is currently (as of June 2017) valid.
DIN 4000 - Part 1 · Edition 9.2012 → current
Item characteristics lists · Terms and principles
DIN 4000 - Part 1 - Supplement 2 Edition 9.2002 → replaced by DIN 4000 Part 1 Edition 9.2012
Item characteristic bars · Terms and principles · Overview of standardized item characteristic bars and lists
DIN 4000 - Part 1 · Edition 9.1992 → replaced by Edition 9.2012
Feature strips · Terms and principles
DIN 4000 - Part 1 · Edition 4.1981 → replaced by Edition 9.1992
Feature strips · Terms and principles
DIN 4000 - Part 1 - Supplement 1 Edition 2.1975 → replaced by DIN 4000 Part 1 Edition 9.1992
Item attribute bars · Principles, application in item attribute lists
DIN 4000 - Part 2 edition 12.1999 → replaced by DIN 4000 parts 160 and 161 edition 2.2007
Feature strips · Screws and nuts
DIN 4000 - Part 2 - Supplement 1 · Edition 12.1999 → replaced by DIN 4000 Part 160 Edition 2.2007
Item characteristic strips · Screws and nuts · Assignment to specialist screw standards
DIN 4000 - Part 2 - Supplement 2 · Edition 12.1999 → replaced by DIN 4000 Part 161 Edition 2.2007
Feature strips · Screws and nuts · Assignment to specialist nuts standards
DIN 4000 - Part 2 · Edition 1.1986 → replaced by Edition 12.1999
Feature strips for screws and nuts
DIN 4000 - Part 2 Edition 12.1977 → replaced by Edition 1.1986
Feature strips for screws and nuts
DIN 4000 - Part 2 - Supplement 1 · Edition 12.1977 → replaced by Edition 12.1999
Feature strips for screws and nuts · Assignment to technical standards
DIN 4000 - part 3 edition 11.1995 → replaced by DIN 4000 part 162 edition 5.2009
Property feature strips for discs and rings
DIN 4000 - Part 3 · Edition 7.1984 → replaced by Edition 11.1995
Property feature strips for discs and rings
DIN 4000 - Part 3 · Edition 6.1976 → replaced by Edition 7.1984
Property feature strips for discs and rings
DIN 4000 - Part 3 - Supplement 1 · Edition 6.1976 → replaced by Edition DIN 4000 Part 3 Edition 7.1984
Feature strips for discs and rings · Assignment to technical standards
DIN 4000 - Part 4 · Edition 6.1984 → withdrawn
Item feature strips for semi-finished products
DIN 4000 - Part 4 · Edition 6.1976 → replaced by Edition 6.1984
Item feature strips for semi-finished products
DIN 4000 - Part 4 - Supplement 1 · Edition 6.1976 → replaced by DIN 4000 Part 4 Edition 6.1984
Item characteristic strips for semi-finished products · Assignment to technical standards
DIN 4000 - Part 5 · Edition 2.1984 → current
Feature strips for capacitors
DIN 4000 - Part 5 · Edition 6.1977 → replaced by Edition 2.1984
Feature strips for capacitors
DIN 4000 - Part 5 - Supplement 1 · Edition 6.1977 → replaced by DIN 4000 Part 5 Edition 2.1984
Feature strips for capacitors · Allocation to technical standards
DIN 4000 - Part 6 · Edition 2.1984 → current
Property feature strips for resistors
DIN 4000 - Part 6 · Edition 6.1977 → replaced by Edition 2.1984
Property feature strips for resistors
DIN 4000 - Part 6 - Supplement 1 · Edition 6.1977 → replaced by DIN 4000 Part 6 Edition 2.1984
Feature strips for resistors · Assignment to technical standards
DIN 4000 - Part 7 Edition 10.1984 → withdrawn
Feature strips for seals
DIN 4000 - Part 7 · Edition 6.1976 → replaced by Edition 10.1984
Feature strips for seals
DIN 4000 - Part 7 - Supplement 1 · Edition 6.1976 → replaced by DIN 4000 Part 7 Edition 10.1984
Item characteristic strips for seals · Assignment to technical standards
DIN 4000 - Part 8 · Edition 1.1986 → withdrawn
Property feature strips for flanges
DIN 4000 - Part 8 · Edition 6.1977 → replaced by Edition 1.1986
Property feature strips for flanges
DIN 4000 - Part 8 - Supplement 1 · Edition 6.1977 → replaced by DIN 4000 Part 8 Edition 1.1986
Characteristic strips for flanges · Assignment to technical standards
DIN 4000 - Part 9 Edition 2.2001 → replaced by DIN 4000 Part 163 Edition 5.2009
Feature strips · Bolts, pins, rivets, split pins, parallel keys, wedges and disc springs
DIN 4000 - Part 9 · Edition 1.1986 → replaced by Edition 2.2001
Property feature strips for bolts, pins, rivets, split pins, parallel keys, wedges and disc springs
DIN 4000 - Part 9 Edition 10.1977 → replaced by Edition 1.1986
Property feature strips for bolts, pins, rivets, split pins, parallel keys, wedges and disc springs
DIN 4000 - Part 9 - Supplement 1 edition 10.1977 → replaced by DIN 4000 Part 9 edition 1.1986
Item characteristics strips for bolts, pins, rivets, split pins, parallel keys, wedges and disc springs · Allocation to technical standards
DIN 4000 - Part 10 · Edition 11.1986 → current
Feature strips for electrical lines, cables, wires and strands
DIN 4000 - Part 10 · Edition 7.1978 → replaced by Edition 11.1986
Feature strips for electrical lines, cables and wires
DIN 4000 - part 10 - supplement 1 edition 7.1978 → replaced by DIN 4000 part 10 edition 11.1986
Feature strips for electrical lines, cables and wires · Assignment to technical standards
DIN 4000 - Part 11 Edition 4.1987 → current
Feature strips for springs
DIN 4000 - Part 11 Edition 12.1978 → replaced by Edition 4.1987
Feature strips for springs
DIN 4000 - Part 12 · Edition 4.1994 → withdrawn
Item feature strips for rolling bearings and rolling bearing parts
DIN 4000 - Part 12 · Edition 2.1979 → replaced by Edition 4.1994
Item feature strips for rolling bearings and rolling bearing parts
DIN 4000 - Part 12 - Supplement 1 Edition 2.1979 → replaced by DIN 4000 Part 12 Edition 4.1994
Item attribute strips for rolling bearings and rolling bearing parts · Assignment to technical standards
DIN 4000 - Part 13 · Edition 4.1987 → withdrawn
Property feature strips for fittings
DIN 4000 - Part 13 · Edition 7.1978 → replaced by Edition 4.1987
Feature strips for pipe fittings
DIN 4000 - part 13 - supplement 1 edition 7.1978 → replaced by DIN 4000 part 13 edition 4.1987
Characteristic bars for pipe fittings · Assignment to technical standards
DIN 4000 - Part 14 · Edition 12.1086 → current
Feature strips for cable lugs, plugs and cable connectors
DIN 4000 - Part 14 · Edition 2.1980 → replaced by Edition 12.1986
Feature strips for cable lugs, plugs and cable connectors
DIN 4000 - Part 14 - Supplement 1 Edition 2.1980 → replaced by DIN 4000 Part 14 Edition 12.1986
Feature strips for cable lugs, plugs and cable connectors · Allocation of standards
DIN 4000 - Part 15 · Edition 2.1993 → withdrawn
Item feature strips for galvanic elements
DIN 4000 - Part 15 · Edition 9.1980 → replaced by Edition 2.1993
Item feature strips for galvanic elements
DIN 4000 - Part 15 - Supplement 1 Edition 9.1980 → replaced by DIN 4000 Part 15 Edition 2.1993
Feature strips for galvanic elements · Assignment to technical standards
DIN 4000 - Part 16 · Edition 5.1988 → withdrawn
Feature strips for pipe fittings
DIN 4000 - Part 16 · Edition 2.1981 → replaced by Edition 5.1988
Feature strips for pipe fittings
DIN 4000 - Part 16 - Supplement 1 Edition 2.1981 → replaced by DIN 4000 Part 16 Edition 5.1988
Feature strips for pipe fittings · Allocation of standards
DIN 4000 - Part 17 · Edition 5.1988 → withdrawn
Property feature strips for electric lamps
DIN 4000 - Part 17 · Edition 9.1980 → replaced by Edition 5.1988
Property feature strips for electric lamps
DIN 4000 - part 17 - supplement 1 edition 9.1980 → replaced by DIN 4000 part 17 edition 5.1988
Feature strips for electric lamps · Allocation of standards
DIN 4000 - Part 18 · Edition 12.1988 → current
Property feature strips for semiconductor diodes
DIN 4000 - Part 18 Edition 9.1980 → replaced by Edition 12.1988
Property feature strips for semiconductor diodes
DIN 4000 - Part 19 · Edition 12.1988 → current
Feature strips for transistors and thyristors
DIN 4000 - Part 19 Edition 9.1980 → replaced by Edition 12.1988
Feature strips for transistors and thyristors
DIN 4000 - Part 20 · Edition 12.1988 → withdrawn
Feature strips for optoelectronic semiconductor components
DIN 4000 - Part 20 · Edition 12.1980 → replaced by Edition 12.1988
Feature strips for optoelectronic semiconductor components
DIN 4000 - Part 21 · Edition 8.1979 → withdrawn
Characteristic strips for ribbons for machines and devices in office and data technology
DIN 4000 - Part 22 · Edition 7.2008 → current
Item characteristic lists · Tools for sawing
DIN 4000 - Part 22 · Edition 4.1998 → replaced by Edition 7.2008 as well as DIN 4000 Parts 98 and 170 Edition 1.2012
Item feature strips · Tools for cutting with geometrically defined cutting edges
DIN 4000 - Part 22 · Edition 6.1981 → replaced by DIN 4000 Parts 22, 76, 78, 80, 81, 82 and 83 Edition 4.1998
Characteristic bars for tools for cutting with geometrically defined cutting edges
DIN 4000 - Part 22 - Supplement 1 · Edition 6.1981 → replaced by DIN 4000 Parts 22, 76, 78, 80, 81, 82 and 83 Edition 4.1998
Item characteristic bars for tools for cutting with geometrically defined cutting edges · Allocation of standards
DIN 4000 - Part 23 · Edition 12.1988 → withdrawn
Item characteristic strips for materials · Steel and iron
DIN 4000 - part 23 edition 10.1981 → replaced by edition 12.1988
Item characteristic strips for materials · Steel and iron
DIN 4000 - Part 23 - Supplement 1 Edition 10.1981 → replaced by DIN 4000 Part 23 Edition 12.1988
Item characteristic bars for materials · steel and iron · assignment of standards
DIN 4000 - Part 24 · Edition 4.1989 → withdrawn
Feature strips for hand tools for hammering, riveting and hitting
DIN 4000 - Part 24 · Edition 4.1981 → replaced by Edition 4.1989
Feature strips for tools for hammering, hitting and riveting
DIN 4000 - Part 24 - Supplement 1 · Edition 4.1981 → replaced by DIN 4000 Part 24 Edition 4.1989
Characteristic bars for tools for hammering, hitting and riveting · Allocation of standards
DIN 4000 - Part 25 · Edition 5.1988 → withdrawn
Feature strips for hand tools for shear and bite cutting
DIN 4000 - Part 25 · Edition 5.1981 → replaced by Edition 5.1988
Feature strips for tools for shear and wedge cutting
DIN 4000 - Part 25 - Supplement 1 · Edition 5.1981 → replaced by DIN 4000 Part 25 Edition 5.1988
Characteristic bars for tools for shear and wedge cutting · Allocation of standards
DIN 4000 - Part 26 · Edition 7.1981 → withdrawn
Feature strips for levers
DIN 4000 - Part 27 · Edition 2.1982 → withdrawn
Item feature strips for gearboxes
DIN 4000 - Part 28 edition 1.1991 → replaced by DIN 4000 parts 128, 129, 130 and 131 editions 10.2003 as well as parts 132, 133, 134 and 135 editions 3.2005
Item attribute strips for tools for cutting with geometrically undefined cutting edges
DIN 4000 - Part 28 · Edition 1.1982 → replaced by Edition 1.1991
Item attribute strips for tools for cutting with geometrically undefined cutting edges
DIN 4000 - Part 28 - Supplement 1 Edition 1.1982 → replaced by DIN 4000 Part 28 Edition 1.1991
Item characteristic bars for tools for cutting with geometrically undefined cutting edges · Allocation of standards
DIN 4000 - Part 29 · Edition 5.1988 → current
Feature strips for cable and line glands and entries
DIN 4000 - Part 29 · Edition 4.1982 → replaced by Edition 5.1988
Item characteristics strip for cable and line glands and entries
DIN 4000 - Part 30 · Edition 6.1990 → withdrawn
Characteristic bar for signs
DIN 4000 - Part 30 · Edition 8.1982 → replaced by Edition 6.1990
Characteristic bar for signs
DIN 4000 - Part 31 · Edition 7.1984 → current
Feature strips for electrical fuse links and circuit breakers
DIN 4000 - Part 32 · Edition 3.1991 → withdrawn
Item characteristics bar for materials · Non-ferrous metals
DIN 4000 - Part 32 Edition 10.1983 → replaced by Edition 3.1991
Feature strips for materials · Non-ferrous metals
DIN 4000 - Part 33 · Edition 10.1983 → withdrawn
Item feature strips for clutches, freewheels, joints and cardan shafts
DIN 4000 - Part 34 · Edition 10.1983 → withdrawn
Feature strips for brakes for rotating movement
DIN 4000 - Part 35 · Edition 10.1983 → withdrawn
Feature strips for shaft-hub connections
DIN 4000 - Part 36 · Edition 5.1991 → withdrawn
Feature strips for pipe screw connections
DIN 4000 - Part 36 · Edition 10.1983 → replaced by Edition 5.1991
Feature strips for pipe screw connections
DIN 4000 - Part 38 · Edition 12.1983 → withdrawn
Feature strips for tools for screwing
DIN 4000 - Part 39 · Edition 12.1983 → current
Item feature strips for rotating electrical machines
DIN 4000 - Part 41 · Edition 12.1983 → current
Feature strips for soldering lugs, soldering pins and soldering terminals
DIN 4000 - Part 42 Edition 12.1983 → current
Feature strips for electrical and electronic relays and contactors
DIN 4000 - Part 43 · Edition 12.1984 → withdrawn
Property feature strips for pulleys, belts, sprockets and chains
DIN 4000 - Part 44 · Edition 7.2007 → current
Feature strips · Clamps
DIN 4000 - Part 44 · Edition 12.2000 → replaced by Edition 7.2007
Feature strips · Clamps
DIN 4000 - Part 44 · Edition 9.1984 → replaced by Edition 12.2000
Feature strips for clamps and cable ties
DIN 4000 - Part 44 · Edition 12.2000 → replaced by Edition 7.2007
Feature strips · Clamps
DIN 4000 - Part 44 · Edition 9.1984 → replaced by Edition 12.2000
Feature strips for clamps and cable ties
DIN 4000 - Part 45 · Edition 4.1998 → withdrawn
Item feature strips · Tool holder
DIN 4000 - Part 45 · Edition 1.1986 → replaced by DIN 4000 Parts 45, 72, 73, 89, 90, 92 and 97 Edition 4.1998
Item characteristic bars for tool holders
DIN 4000 - Part 46 · Edition 1.1986 → withdrawn
Property feature strips for clamp fittings for hand and protective bar tubes
DIN 4000 - Part 47 · Edition 1.1986 → withdrawn
Item feature strips for flat and angled molded parts
DIN 4000 - Part 48 · Edition 1.1986 → withdrawn
Feature strips for hangers, hinges, table and hinged hinges
DIN 4000 - Part 49 · Edition 11.1990 → withdrawn
Item feature strips for plain bearings
DIN 4000 - Part 50 · Edition 1.1986 → withdrawn
Feature strips for integrated digital circuits
The application of IEC 61360 Part 1 Edition 7.2009 is recommended
DIN 4000 - Part 51 · Edition 10.1985 → current
Feature strips for loudspeakers, earphones, microphones and speech capsules
DIN 4000 - Part 52 · Edition 12.1986 → withdrawn
Item feature strips for mechanical locking devices
DIN 4000 - Part 54 · Edition 2.1987 → current
Feature strips for electrical connectors
DIN 4000 - Part 55 edition 11.1987 → replaced by DIN 4000 parts 164, 165 and 166 edition 10.2010
Item characteristics bars for test equipment for geometric sizes
DIN 4000 - Part 56 · Edition 4.1987 → current
Feature strips for electrical switches and switching devices up to AC 1000 V and DC 1200 V
DIN 4000 - Part 57 · Edition 11.1990 → withdrawn
Feature strips for welding consumables, soft and hard solders; Fluxes and adhesives
DIN 4000 - Part 59 · Edition 12.1987 → withdrawn
Property feature strips for racks, spur gears, spur gear shafts, bevel gears, bevel gear shafts, worms and worm gears
DIN 4000 - Part 61 · Edition 6.1992 → withdrawn
Feature strips for pressure gauges and measuring instrument accessories
DIN 4000 - Part 64 · Edition 3.1992 → current
Item feature strips for smooth, unprofiled rollers
DIN 4000 - Part 65 · Edition 1.1991 → current
Feature strips for pre-assembled electrical cables, jumper wires and litz wires
DIN 4000 - Part 69 · Edition 11.1993 → withdrawn
Feature strips for frames
DIN 4000 - Part 70 · Edition 1.1992 → withdrawn
Feature strips for core sheets, cores and coil formers for small transformers, transformers and chokes
DIN 4000 - Part 72 · Edition 4.1998 → replaced by DIN 4000 Part 89 Edition 3.2012
Item feature strips · Tool holder with cylindrical tool holder
DIN 4000 - Part 73 · Edition 4.1998 → replaced by DIN 4000 Part 89 Edition 3.2012
Item feature strips · Tool holder with tapered tool holder
DIN 4000 - Part 76 · Edition 2.2014 → current
Item characteristic lists · Inserts, clamped
DIN 4000 - Part 76 · Edition 11.2009 → replaced by Edition 2.2014
Item characteristic lists · Inserts, clamped
DIN 4000 - Part 76 · Edition 8.2006 → replaced by Edition 11.2009
Item characteristic lists · Inserts, clamped
DIN 4000 - Part 76 · Edition 3.2004 → replaced by Edition 8.2006
Item characteristic lists · Inserts, clamped
DIN 4000 - Part 76 · Edition 4.1998 → replaced by Edition 3.2004
Item characteristic lists · For cutting inserts, clamped
DIN 4000 - Part 77 · Edition 12.2011 → current
Item feature lists · Cutting bodies, clamped, for grooving and threading
DIN 4000 - Part 77 · Edition 8.2006 → replaced by Edition 12.2011
Item feature lists · Cutting bodies, clamped, for grooving and threading
DIN 4000 - Part 77 · Edition 3.2004 → replaced by Edition 8.2006
Item feature lists · Cutting bodies, clamped, for grooving and threading
DIN 4000 - Part 77 · Edition 4.1998 → replaced by Edition 3.2004
Item feature lists · Cutting bodies, clamped, for grooving and threading
DIN 4000 - Part 78 · Edition 8.2011 → current
Item characteristics lists · Inserts, soldered
DIN 4000 - Part 78 · Edition 8.2006 → replaced by Edition 8.2011
Item characteristics lists · Inserts, soldered
DIN 4000 - Part 78 · Edition 4.1998 → replaced by Edition 8.2006
Item characteristics lists · Inserts, soldered
DIN 4000 - Part 80 · Edition 8.2011 → current
Lists of characteristics · Taps, thread forming machines and dies
DIN 4000 - Part 80 · Edition 1.2005 → replaced by Edition 8.2011
Lists of characteristics · Taps, thread forming machines and dies
DIN 4000 - Part 80 · Edition 4.1998 → replaced by Edition 1.2005
Lists of characteristics · Taps, thread forming machines and dies
DIN 4000 - Part 81 · Edition 8.2012 → current
Item characteristic lists · Drilling and countersinking tools with non-detachable cutting edges
DIN 4000 - Part 81 · Edition 1.2010 → replaced by Edition 8.2012
Item characteristic lists · Drilling and countersinking tools with non-detachable cutting edges
DIN 4000 - Part 81 · Edition 7.2009 → replaced by Edition 1.2010
Item characteristic lists · Drilling and countersinking tools with non-detachable cutting edges
DIN 4000 - Part 81 · Edition 8.2006 → replaced by Edition 7.2009
Item characteristic lists · Drilling and countersinking tools with non-detachable cutting edges
DIN 4000 - Part 81 · Edition 4.2004 → replaced by Edition 8.2006
Item characteristic lists · Drilling and countersinking tools with non-detachable cutting edges
DIN 4000 - Part 81 · Edition 4.1998 → replaced by Edition 4.2004 and DIN 4000 Part 126 Edition 8.2006
Item characteristic strips · Drilling, countersinking and reaming tools with non-detachable cutting edges
DIN 4000 - Part 82 · Edition 8.2011 → current
Lists of characteristics · Milling cutter with shank and non-detachable cutting edges
DIN 4000 - Part 82 Edition 7.2005 → replaced by Edition 8.2011
Lists of characteristics · Milling cutter with shank and non-detachable cutting edges
DIN 4000 - Part 82 · Edition 4.1998 → replaced by Edition 7.2005
Item feature strips · Milling cutter with shank and non-detachable cutting edges
DIN 4000 - Part 83 · Edition 5.2011 → current
Item feature lists · Milling cutter with bore and non-detachable cutting edges
DIN 4000 - Part 83 · Edition 1.2005 → replaced by Edition 5.2011
Item feature lists · Milling cutter with bore and non-detachable cutting edges
DIN 4000 - Part 83 · Edition 4.1998 → replaced by Edition 1.2005
Item feature strips · Milling cutter with bore and non-detachable cutting edges
DIN 4000 - Part 84 · Edition 2.2012 → current
Item characteristic lists · Modular tool systems with adjustable cutter carriers for drilling bores
DIN 4000 - Part 85 · Edition 10.1995 → withdrawn
Item feature strips · For threads
DIN 4000 - Part 86 · Edition 3.2011 → current
Item characteristics lists · Drilling and countersinking tools for exchangeable cutting edges
DIN 4000 - Part 86 · Edition 8.2006 → replaced by Edition 3.2011
Item characteristics lists · Drilling and countersinking tools for exchangeable cutting edges
DIN 4000 - Part 86 · Edition 4.1998 → replaced by DIN 4000 Part 86 and 127 Edition 8.2006
Item feature strips · Drilling, countersinking and reaming tools with interchangeable cutting edges
DIN 4000 - Part 87 · Edition 12.2011 → current
Lists of characteristics · Milling cutter with shank for exchangeable cutting edges
DIN 4000 - Part 87 · Edition 1.2005 → replaced by Edition 12.2011
Lists of characteristics · Milling cutter with shank for exchangeable cutting edges
DIN 4000 - Part 87 · Edition 4.1998 → replaced by Edition 1.2005
Feature strips · Milling cutter with shank and exchangeable cutting edges
DIN 4000 - Part 88 · Edition 12.2011 → current
Item characteristic lists · Milling cutter with bore for exchangeable cutting edges
DIN 4000 - Part 88 · Edition 1.2005 → replaced by Edition 12.2011
Item characteristic lists · Milling cutter with bore for exchangeable cutting edges
DIN 4000 - Part 88 · Edition 4.1998 → replaced by Edition 1.2005
Item feature strips · Milling cutter with bore and exchangeable cutting edges
DIN 4000 - Part 89 · Edition 3.2012 → current
Item characteristics lists · Tool holders and intermediate modules
DIN 4000 - Part 89 · Edition 4.1998 → replaced by Edition 3.2012
Item feature strips · Circumferential tool holders
DIN 4000 - Part 90 · Edition 12.2011 → current
Item feature lists · Tool holders and tool heads for exchangeable cutting edges
DIN 4000 - Part 90 · Edition 11.2007 → replaced by Edition 12.2011
Item feature lists · Tool holders and tool heads for exchangeable cutting edges
DIN 4000 - Part 90 · Edition 4.1998 → replaced by Edition 11.2007
Feature strips · Clamp holder with exchangeable cutting edges
DIN 4000 - Part 91 · Edition 4.1998 → replaced by DIN 4000 Part 89 Edition 3.2012
Feature strips · Intermediate modules
DIN 4000 - Part 92 · Edition 4.1998 → replaced by DIN 4000 Part 89 Edition 3.2012
Feature strips · Standing tool holders
DIN 4000 - Part 93 · Edition 8.2013 → current
Lists of item characteristics · Collets, clamping sleeves, clamping sleeves, expansion sleeves and clamping heads
DIN 4000 - Part 93 · Edition 8.2006 → replaced by Edition 8.2013
Lists of item characteristics · Collets, clamping sleeves and clamping sleeves
DIN 4000 - Part 93 · Edition 4.1998 → replaced by Edition 8.2006
Feature strips · Collets
DIN 4000 - Part 94 · Edition 1.2012 → current
Item characteristic lists · Quick-change inserts
DIN 4000 - Part 94 · Edition 11.2007 → replaced by Edition 1.2012
Item characteristic lists · Quick-change inserts
DIN 4000 - Part 94 · Edition 4.1998 → replaced by Edition 11.2007
Feature strips · Quick-change inserts
DIN 4000 - Part 95 · Edition 12.2016 → current
Item characteristics lists · Separation point coding for tools and clamping devices
DIN 4000 - Part 95 · Edition 11.2013 → replaced by Edition 12.2016
Item characteristics lists · Separation point coding for tools and clamping devices
DIN 4000 - Part 95 · Edition 11.2007 → replaced by Edition 11.2013
Item characteristics lists · Separation point coding for tools and clamping devices
DIN 4000 - Part 95 - Supplement 1 · Edition 11.2007 → replaced by DIN 4000 Part 95 Edition 11.2013
Item characteristics lists · Separation point coding for tools and clamping tools · Explanations of abbreviations for company-specific holders
DIN 4000 - Part 95 · Edition 4.1998 → replaced by Edition 11.2007
Item characteristic bars · Tool separation point coding
DIN 4000 - Part 95 - Supplement 1 · Edition 4.1998 → replaced by Edition 11.2007
Item characteristic bars · Tool separation point coding · Abbreviations for company-specific recordings
DIN 4000 - Part 97 · Edition 4.1998 → replaced by DIN 4000 Part 89 Edition 3.2012
Item feature strips · Tool holder with n-edge tool holder
DIN 4000 - Part 98 · Edition 1.2012 → current
Lists of item characteristics · Lathe chisels with non-detachable cutting edges
DIN 4000 - Part 102 · Edition 6.2017 → current
Item feature lists · Data exchange for item feature lists using XML schema
The standard specifies the XML schema for the data exchange of products that are classified and described by means of lists of characteristics according to DIN 4000.
DIN 4000 - Part 102 · Edition 12.2013 → replaced by Edition 6.2017
Item feature lists · Data exchange for item feature lists using XML schema
DIN 4000 - Part 125 · Edition 8.1998 → current
Item feature strips · Elastomer spring elements
DIN 4000 - Part 126 · Edition 9.2012 → current
Lists of characteristics · Reaming tools with non-detachable cutting edges
DIN 4000 - Part 126 · Edition 8.2006 → replaced by Edition 9.2012
Lists of characteristics · Reaming tools with non-detachable cutting edges
DIN 4000 - Part 127 · Edition 4.2011 → current
Item characteristic lists · Reaming tools for interchangeable cutting edges
DIN 4000 - Part 127 · Edition 8.2006 → replaced by Edition 4.2011
Item characteristic lists · Reaming tools for interchangeable cutting edges
DIN 4000 - Part 128 · Edition 9.2011 → current
Lists of characteristics · Abrasive tools made from bonded abrasives with holes or threads
DIN 4000 - Part 128 · Edition 10.2003 → replaced by Edition 9.2011
Lists of characteristics · Abrasive tools made from bonded abrasives with holes or threads
DIN 4000 - Part 129 · Edition 9.2011 → current
Lists of characteristics · Grinding segments, honing tools, grinding sticks and whetstones made from bonded abrasives
DIN 4000 - Part 129 · Edition 10.2003 → replaced by Edition 9.2011
Lists of characteristics · Grinding segments, honing tools, grinding sticks and whetstones made from bonded abrasives
DIN 4000 - Part 130 · Edition 9.2011 → current
Item characteristic lists · Mounted points and grinding tools with thread inserts
DIN 4000 - Part 130 · Edition 10.2003 → replaced by Edition 9.2011
Item characteristic lists · Mounted points and grinding tools with thread inserts
DIN 4000 - Part 131 · Edition 9.2011 → current
Lists of item characteristics · Abrasive tools made from coated abrasives
DIN 4000 - Part 131 · Edition 10.2003 → replaced by Edition 9.2011
Lists of item characteristics · Abrasive tools made from coated abrasives
DIN 4000 - Part 132 · Edition 9.2011 → current
Lists of characteristics · Grinding tools with diamond or boron nitride with bore
DIN 4000 - Part 132 · Edition 3.2005 → replaced by Edition 9.2011
Lists of characteristics · Grinding tools with diamond or boron nitride with bore
DIN 4000 - Part 133 · Edition 9.2011 → current
Item feature lists · Mounted points with diamond or boron nitride
DIN 4000 - Part 133 · Edition 3.2005 → replaced by Edition 9.2011
Item feature lists · Mounted points with diamond or boron nitride
DIN 4000 - Part 134 · Edition 9.2011 → current
Item characteristic lists · Non-rotating tools and honing tools with diamond or boron nitride
DIN 4000 - Part 134 · Edition 3.2005 → replaced by Edition 9.2011
Item characteristics lists · Non-rotating tools with diamond or boron nitride
DIN 4000 - Part 135 · Edition 9.2011 → current
Item characteristic lists · Tools for dressing and profiling grinding tools
DIN 4000 - Part 135 · Edition 3.2005 → replaced by Edition 9.2011
Item characteristic lists · Tools for dressing and profiling grinding tools
DIN 4000 - Part 136 · Edition 9.2011 → current
Item characteristic lists · Holders and clamping tools for rotating and stationary grinding and dressing tools
DIN 4000 - Part 137 · Edition 9.2011 → current
Item characteristics lists · Tools with geometrically undefined cutting edge for machining gears
DIN 4000 - Part 140 · Edition 2.2011 → current
Item characteristic lists · Workpiece gear data for involute gear
DIN 4000 - Part 140 · Edition 4.2005 → replaced by Edition 2.2011
Item characteristic lists · Workpiece gear data
DIN 4000 - Part 141 · Edition 10.2016 → current
Lists of characteristics · Hob with bore or shank for involute toothing, outside
DIN 4000 - Part 141 · Edition 2.2011 → replaced by Edition 10.2016
Lists of characteristics · Hob with bore or shank for involute toothing, outside
DIN 4000 - Part 141 · Edition 4.2005 → replaced by Edition 2.2011
Lists of characteristics · Hob with bore or shank for face gearing
DIN 4000 - Part 142 · Edition 2.2011 → current
Lists of characteristics · Shaving wheels for involute teeth
DIN 4000 - Part 142 · Edition 5.2005 → replaced by Edition 2.2011
Lists of item characteristics · Shaving wheels for external and internal toothing
DIN 4000 - Part 143 · Edition 9.2016 → current
Lists of characteristics · Cutting wheels with bore or shank for involute teeth
DIN 4000 - Part 143 · Edition 2.2011 → replaced by Edition 9.2016
Lists of characteristics · Cutting wheels with bore or shank for involute teeth
DIN 4000 - Part 143 · Edition 5.2005 → replaced by Edition 2.2011
Lists of item characteristics · Cutting wheels with bore or shank
DIN 4000 - Part 144 · Edition 9.2011 → current
Item characteristic lists · Master gears and dressing gears for involute gearing
DIN 4000 - Part 145 · Edition 5.2017 → current
Lists of characteristics · Broaching tools for involute toothing, inside
DIN 4000 - Part 150 · Edition 10.2005 → current
Lists of item characteristics · Socket wrench and screwdriver bits, hand-operated and machine-operated
DIN 4000 - Part 151 · Edition 10.2005 → current
Item characteristic lists · Connection parts for hand and machine-operated screwdriving tools
DIN 4000 - Part 152 · Edition 11.2006 → current
Item characteristics lists · Wrenches - open-end, ring, hook and pin wrenches
DIN 4000 - Part 153 · Edition 11.2006 → current
Lists of item characteristics · Screwdrivers and socket wrenches
DIN 4000 - Part 154 · Edition 11.2006 → current
Item characteristic lists · Torque tools, hand-operated
DIN 4000 - Part 155 · Edition 11.2006 → current
Lists of item characteristics · Drive parts for sockets and screwdriver bits, manually operated
DIN 4000 - Part 160 · Edition 2.2007 → current
Item feature strips · Connecting elements with external thread
DIN 4000 - Part 161 · Edition 2.2007 → current
Item feature strips · Connection elements with internal thread
DIN 4000 - Part 162 · Edition 5.2017 → current
Item characteristic strips · washers, washers and rings
DIN 4000 - Part 162 · Edition 5.2009 → replaced by Edition 5.2017
Item characteristic strips · washers, washers and rings
DIN 4000 - Part 163 · Edition 5.2009 → current
Item feature strips · Connecting elements without thread
DIN 4000 - Part 164 · Edition 10.2010 → current
Lists of characteristics · Material measures, setting masters and standards for geometric sizes
DIN 4000 - Part 165 · Edition 10.2010 → current
Item characteristics lists · Gauges for geometric sizes
DIN 4000 - Part 166 · Edition 10.2010 → current
Item characteristic lists · Manual measuring equipment for geometric sizes
DIN 4000 - Part 167 · Edition 10.2010 → current
Item characteristic lists · Measuring devices for geometric quantities
DIN 4000 - Part 168 · Edition 11.2011 → current
Lists of item characteristics · Measuring transducers / transducers / evaluation devices including measuring amplifiers for geometric values
DIN 4000 - Part 169 · Edition 10.2010 → current
Lists of item characteristics · Manual gear measuring equipment and gear measuring devices
DIN 4000 - Part 170 · Edition 9.2014 → current
Lists of characteristics · Files and rasps with geometrically defined cutting edges
DIN 4000 - Part 170 · Edition 1.2012 → replaced by Edition 9.2014
Lists of characteristics · Files and rasps with geometrically defined cutting edges
DIN 4000 - Part 171 · Edition 4.2012 → current
Item feature lists · Exchangeable cutting inserts for drilling
DIN 4000 - Part 172 · Edition 12.2012 → current
Item characteristic lists · Driven tool units
DIN 4000 - Part 173 · Edition 12.2013 → current
Item characteristic lists · Machine-operated actuating tools and accessories
DIN 4000 - Part 174 · Edition 2.2014 → current
Item characteristic lists · Cutting inserts for reaming
DIN 4000 - Part 175 · Edition 6.2015 → current
Item characteristic lists · Cartridges, inserts and cutter carriers for interchangeable cutters
DIN 4000 - Part 178 · Edition 12.2016 → current
Item feature lists · Measuring head systems, stylus systems and probes
DIN 4000 - Part 179 · Edition 12.2016 → current
Item feature lists · Deburring tools
DIN 4000 - Part 210 · Edition 8.2015 → current
Item characteristic lists · Cutting machine tools
DIN 4002 - Part 1 Edition 7.2007 → current
Features and scope of product data exchange · Basics
DIN 4002 - Part 2 Edition 7.2007 → current
Features and scope of product data exchange · Terms and conceptual information model
DIN 4002 - Part 4 Edition 9.2013 → current
Features and areas of application for product data exchange · Terminology rules for attributes for structure elements
DIN 4002 - part 4 edition 9.2007 → replaced by edition 9.2013
Features and areas of application for product data exchange · Terminology rules for attributes for structure elements
DIN 4002 - Part 5 Edition 9.2010 → current
Features and areas of application for product data exchange · Units for quantitative features
DIN 4002 - Part 5 · Edition 7.2008 → replaced by Edition 9.2010
Features and areas of application for product data exchange · Units for quantitative features
DIN 4002 - Part 7 Edition 11.2009 → current
Features and areas of application for product data exchange · Rules for creating the hierarchy of areas of application
DIN 4002 - Part 16 · Edition 6.2011 → current
Features and areas of application for product data exchange · Content and data-related definition of the attributes for structural elements of units and sizes
DIN 4002 - Part 100 · Edition 8.2012 → current
Features and areas of application for product data exchange · Features at www.DINsml.net
DIN 4002 - Part 100 · Edition 1.2006 → replaced by Edition 8.2012
Features and areas of application for product data exchange · Features at www.DINsml.net
DIN 4002 - Part 101 · Edition 5.2010 → current
Features and areas of application for product data exchange · Application classes at www.DINsml.net
DIN 4003 - Part 1 · Edition 2.2014 → current
Concept for the construction of 3D models based on features according to DIN 4000 · Overview and basics
DIN 4003 - Part 1 · Edition 3.2011 → replaced by Edition 2.2014
Concept for the construction of 3D models based on features according to DIN 4000 · Overview and basics
DIN 4003 - Part 76 · Edition 12.2011 → current
Concept for the construction of 3D models based on features according to DIN 4000 · Cutting inserts, clamped
DIN 4003 - Part 77 · Edition 2.2013 → current
Concept for the construction of 3D models based on features according to DIN 4000 · Cutting body, clamped, for grooving and threading
DIN 4003 - Part 80 · Edition 10.2011 → current
Concept for the construction of 3D models based on features according to DIN 4000 · Taps, thread forming machines and dies
DIN 4003 - Part 81 · Edition 11.2014 → current
Concept for the construction of 3D models based on features according to DIN 4000 · Drilling and countersinking tools with non-detachable cutting edges
DIN 4003 - Part 81 · Edition 3.2011 → replaced by Edition 11.2014
Concept for the construction of 3D models based on features according to DIN 4000 · Drilling and countersinking tools with non-detachable cutting edges
DIN 4003 - Part 82 · Edition 8.2013 → current
Concept for the construction of 3D models based on features according to DIN 4000 · Milling cutter with shank and non-detachable cutting edges
DIN 4003 - Part 83 · Edition 12.2013 → current
Concept for the construction of 3D models based on features according to DIN 4000 · Milling cutter with bore and non-detachable cutting edges
DIN 4003 - Part 84 · Edition 10.2012 → current
Concept for the construction of 3D models based on features according to DIN 4000 · Modular tool systems with adjustable cutter carriers for drilling bores
DIN 4003 - Part 86 · Edition 3.2011 → current
Concept for the construction of 3D models based on features according to DIN 4000 · Drilling and countersinking tools for interchangeable cutting edges
DIN 4003 - Part 87 · Edition 2.2013 → current
Concept for the construction of 3D models based on features according to DIN 4000 · Milling cutter with shank for replaceable cutting edges
DIN 4003 - Part 88 · Edition 12.2013 → current
Concept for the construction of 3D models based on features according to DIN 4000 · Milling cutter with hole for exchangeable cutting edges
DIN 4003 - Part 89 · Edition 12.2013 → current
Concept for the construction of 3D models based on features according to DIN 4000 · Tool holder and intermediate modules
DIN 4003 - Part 90 · Edition 12.2013 → current
Concept for the construction of 3D models based on features according to DIN 4000 · Clamp holders and tool heads for exchangeable cutting edges
DIN 4003 - Part 93 · Edition 12.2013 → current
Concept for the construction of 3D models based on features according to DIN 4000 · Collets, clamping sleeves, clamping sleeves, expansion sleeves and clamping heads
DIN 4003 - Part 126 · Edition 10.2012 → current
Concept for the construction of 3D models based on features according to DIN 4000 · Reaming tools with non-detachable cutting edges
DIN 4003 - Part 127 · Edition 10.2013 → current
Concept for the construction of 3D models based on features according to DIN 4000 · Reaming tools for interchangeable cutting edges
DIN 4003 - Part 171 · Edition 12.2013 → current
Concept for the construction of 3D models based on features according to DIN 4000 · Interchangeable cutting inserts for drilling
DIN 4003 - Part 172 · Edition 12.2013 → current
Concept for the construction of 3D models based on features according to DIN 4000 · Driven tool units
DIN 4003 - Part 173 · Edition 12.2013 → current
Concept for the construction of 3D models based on features according to DIN 4000 · Machine-operated actuating tools and accessories
DIN 4003 - Part 174 · Edition 2.2014 → current
Concept for the construction of 3D models based on features according to DIN 4000 · Inserts for reaming
DIN 4003 - Part 175 · Edition 12.2016 → current
Concept for the construction of 3D models based on features according to DIN 4000 · Cassettes, inserts and cutter carriers for replaceable cutters
DIN 4003 - Part 178 · Edition 12.2016 → current
Concept for the construction of 3D models based on features according to DIN 4000 · Measuring head systems, stylus systems and buttons
DIN 4003 - Part 179 · Edition 12.2016 → current
Concept for the construction of 3D models based on features according to DIN 4000 · Deburring tools
DIN 4003 - Part 210 · Edition 8.2015 → current
Construction and exchange of 3D machine tool models based on features according to DIN 4000 · Cutting machine tools
DIN 4014 edition 3.1990 → replaced by DIN 1054 edition 1.2003, DIN EN 1536 edition 6.1999 and DIN EN 1997 part 1 edition 9.2009
Bored piles · Manufacture, dimensioning and load-bearing behavior
DIN 4014 - part 1 edition 8.1975 → replaced by DIN 4014 edition 3.1990
Bored piles of conventional design · Manufacture, dimensioning and permissible loading
DIN 4014 - Part 1 - Supplement · Edition 8.1975 → replaced by DIN 4014 Edition 3.1990
Bored piles of conventional design · Manufacture, dimensioning and permissible load · Explanations
DIN 4014 - Part 2 Edition 9.1977 → replaced by DIN 4014 Edition 3.1990
Bored piles; Large bored piles · Manufacture, dimensioning and permissible loading
DIN 4017 Edition 3.2006 → current
Subsoil · Calculation of the ground failure resistance of shallow foundations
DIN 4017 - supplement 1 edition 11.2006 → current
Subsoil · Calculation of the ground failure resistance of shallow foundations · Calculation examples
DIN 4017 - Part 1 edition 8.1979 → replaced by DIN 4017 edition 3.2006
Subsoil · Calculations of ground failure of flat foundations loaded vertically in the center
DIN 4017 - part 1 - supplement 1 edition 8.1979 → replaced by DIN 4017 supplement 1 edition 11.2006
Subsoil · Calculations of ground failure of flat foundations loaded vertically in the center · Explanations and calculation examples
DIN 4017 - Part 2 Edition 8.1979 → replaced by DIN 4017 Edition 3.2006
Subsoil · Calculations of ground failure of inclined and eccentrically loaded flat foundations
DIN 4017 - part 2 - supplement 1 edition 8.1979 → replaced by DIN 4017 supplement 1 edition 11.2006
Subsoil · Calculations of ground failure of sloping and eccentrically loaded flat foundations · Explanations and calculation examples
DIN 4018 edition 9.1974 → current
Subsoil · Calculation of the bed pressure distribution under surface foundations
DIN 4018 - Supplement 1 · Edition 5.1981 → current
Subsoil · Calculation of the bed pressure distribution under surface foundations · Explanations and calculation examples
DIN 4019 · Edition 5.2015 → current
Subsoil · Settlement calculations
DIN 4019 · Edition 1.2014 → replaced by Edition 5.2015
Subsoil · Settlement calculations
DIN 4019 - Part 1 edition 4.1979 → replaced by DIN 4019 edition 1.2014
Subsoil · Settlement calculations for vertical, central loads
DIN 4019 - Part 1 - Supplement 1 Edition 4.1979 → replaced by DIN 4019 Edition 1.2014
Subsoil · Settlement calculations for vertical, central loads · Explanations and calculation examples
DIN 4019 - Part 1 · Edition 9.1974 → replaced by Edition 4.1979
Subsoil · Settlement calculations for vertical, central loads
DIN 4019 - Part 1 · Edition 6.1958 → replaced by Edition 9.1974
Subsoil · Settlement calculations for perpendicular, central loads · Guidelines
DIN 4019 - Part 1 · Edition 5.1955 → replaced by Edition 6.1958
Subsoil · Settlement calculations for vertical, central loads
DIN 4019 - Part 2 · Edition 2.1981 → replaced by DIN 4019 Edition 1.2014
Subsoil · Settlement calculations for inclined and eccentric loads
DIN 4019 - Part 2 - Supplement 1 Edition 2.1981 → replaced by DIN 4019 Edition 1.2014
Subsoil · Settlement calculations for inclined and eccentric loads · Explanations and calculation examples
DIN 4019 - Part 2 · Edition 2.1961 → replaced by DIN 4019 Edition 2.1981
Subsoil · Settlement calculations for inclined and eccentric loads (tilting) · Guidelines
DIN 4020 · Edition 12.2010 → current
Geotechnical investigations for structural purposes · Supplementary regulations to DIN EN 1997-2
DIN 4020 - supplement 1 edition 10.2003 → current
Geotechnical investigations for civil engineering purposes · Application aids, explanations
DIN 4020 · Edition 9.2003 → replaced by Edition 12.2010, DIN EN 1997 Part 2 Edition 10.2010 and DIN EN 1997 Part 2 National Annex Edition 12.2010
Geotechnical studies for civil engineering purposes
DIN 4020 edition 10.1990 → replaced by edition 9.2003
Geotechnical studies for civil engineering purposes
DIN 4020 - supplement 1 edition 10.1990 → replaced by edition 9.2003
Geotechnical investigations for civil engineering purposes · Application aids, explanations
DIN 4021 edition 10.1990 → replaced by DIN EN ISO 22475 part 1 edition 1.2007
Subsoil · Digestion through prospecting and drilling as well as taking samples
DIN 4021 - Part 1 edition 7.1971 → replaced by DIN 4021 edition 10.1990
Subsoil · Exploration through prospecting and boreholes as well as taking samples, outcrops in the ground
DIN 4021 - Part 2 Edition 2.1976 → replaced by DIN 4021 Edition 10.1990
Subsoil · Exploration through prospecting and drilling as well as taking samples, outcrops in the rock
DIN 4021 - Part 3 Edition 8.1976 → replaced by DIN 4021 Edition 10.1990
Subsoil · Exploration through prospecting and drilling as well as taking samples, exploring the water conditions
DIN 4022 - part 1 edition 9.1987 → replaced by DIN EN ISO 14688 part 1 edition 1.2003, DIN EN ISO 14689 part 1 edition 4.2004 and DIN EN ISO 22475 part 1 edition 1.2007
Subsoil and groundwater · Naming and describing soil and rock · List of layers for boreholes without continuous extraction of cored samples in the soil and in the rock
DIN 4022 - Part 1 edition 11.1969 → replaced by edition 9.1987
Subsoil and groundwater · Name and description of soil types and rock · List of layers for examinations and boreholes without continuous extraction of core samples
DIN 4022 - Part 2 Edition 3.1981 → replaced by DIN EN ISO 22475 Part 1 Edition 1.2007
Subsoil and groundwater Name and description of soil and rock List of layers for boreholes in rock (solid rock)
DIN 4022 - Part 3 Edition 5.1982 → replaced by DIN EN ISO 22475 Part 1 Edition 1.2007
Subsoil and groundwater Name and description of soil and rock List of layers for boreholes with continuous extraction of cored samples in the soil (loose rock)
DIN 4022 · Edition 4.1938 → withdrawn
Uniform naming of the soil types and creation of the layer index for the investigation of the subsoil for building and water development purposes
DIN 4023 Edition 2.2006 → current
Geotechnical exploration and investigation · Graphic representation of the results of boreholes and other direct outcrops
DIN 4023 · Edition 3.1984 → replaced by Edition 2.2006
Subsoil and water boreholes · Graphic representation of the results
DIN 4023 edition 9.1975 → replaced by edition 3.1984
Subsoil and water boreholes · Graphic representation of the results
DIN 4023 · Edition 2.1955 → replaced by Edition 9.1975
Subsoil and water boreholes · Graphic representation of the results
DIN 4024 - Part 1 · Edition 4.1988 → withdrawn
Machine foundations · Elastic support structures for machines with rotating masses
DIN 4024 - Part 2 · Edition 4.1991 → withdrawn
Machine foundations · Rigid (rigid) support structures for machines with periodic excitation
DIN 4024 edition 1.1955 → replaced by DIN 4024 part 1 edition 4.1988
Support structures for rotating machines (preferably table foundations for steam turbines)
DIN 4025 edition 10.1958 → withdrawn
Foundations for anvil hammers (Schabotte hammers) · Instructions for dimensioning and execution
DIN 4026 edition 8.1975 → replaced by DIN EN 12699 edition 5.2001 and DIN 1054 edition 1.2003
Driving piles · Manufacture, dimensioning and permissible loading
DIN 4026 - Supplement · Edition 8.1975 → replaced by DIN 1054 Edition 1.2003
Driven piles · Production, dimensioning and permissible loads · Explanations
DIN 4028 edition 1.1982 → replaced by DIN 4213 edition 7.2003 and DIN EN 1520 edition 7.2003
Reinforced concrete boards made of lightweight concrete with a structure with pores and pores · Requirements, testing, dimensioning, execution, installation
DIN 4028 edition 10.1938 → replaced by edition 1.1982
Regulations for the manufacture and installation of reinforced concrete hollow floorboards
DIN 4030 - Part 1 · Edition 6.2008 → current
Assessment of water, soil and gases attacking concrete · Basics and limit values
DIN 4030 - Part 2 · Edition 6.2008 → current
Assessment of water, soil and gases attacking concrete · Collection and analysis of water and soil samples
DIN 4030 - Part 1 · Edition 6.1991 → replaced by Edition 6.2008
Assessment of water, soil and gases attacking concrete · Basics and limit values
DIN 4030 - Part 2 · Edition 6.1991 → replaced by Edition 6.2008
Assessment of water, soil and gases attacking concrete · Collection and analysis of water and soil samples
DIN 4030 edition 11.1969 → replaced by DIN 4030 parts 1 and 2 edition 6.1991
Assessment of water, soil and gases attacking concrete
DIN 4031 edition 3.1978 → replaced by DIN 18195 parts 1, 2, 3, 6, 8, 9 and 10 edition 8.1983
Water pressure-retaining bituminous waterproofing for buildings · Guidelines for dimensioning and execution
DIN 4031 edition 11.1959 → replaced by edition 3.1978
Water pressure-retaining bituminous waterproofing for buildings · Guidelines for dimensioning and execution
DIN 4031 edition 7.1932 → replaced by edition 11.1959
Water pressure retaining seals for buildings · Water pressure retaining seals made of bare tar cardboard or bare asphalt bitumen cardboard
DIN 4032 edition 1.1981 → replaced by DIN EN 1916 edition 4.2003
Concrete pipes and fittings · Dimensions, technical delivery conditions
DIN 4032 edition 7.1973 → replaced by edition 1.1981
Concrete pipes and fittings · Dimensions - Technical delivery conditions
DIN 4033 edition 11.1979 → replaced by DIN EN 1610 edition 10.1997
Drainage channels and pipes · Guidelines for execution
DIN 4033 edition 5.1963 → replaced by edition 11.1979
Drainage channels and lines from prefabricated pipes · Guidelines for execution
DIN 4033 edition 5.1941 → replaced by edition 5.1963
Concrete pipes according to DIN 4032 · Principles for the construction of concrete pipes
DIN 4033 edition 4.1940 → replaced by edition 5.1941
Concrete pipes according to DIN 4032 · Principles for the construction of concrete pipes
DIN 4034 - Part 2 · Edition 5.2013 → current
Shafts made of concrete, steel fiber reinforced concrete and precast concrete parts · Shafts for wells and seepage systems
DIN 4034 - Part 1 edition 9.1993 → replaced by DIN EN 1917 edition 4.2003
Shafts made of precast concrete and reinforced concrete · Shafts for underground sewers and pipes · Dimensions, technical delivery conditions
DIN - Part 1 · Edition 9.1990 → replaced by Edition 9.1993
Shafts made of precast concrete and reinforced concrete · Shafts for underground sewers and pipes · Dimensions, technical delivery conditions
DIN 4034 - Part 2 Edition 10.1990 → replaced by Edition 5.2013
Shafts made of precast concrete and reinforced concrete · Shafts for wells and seepage systems · Dimensions, technical delivery conditions
DIN 4034 - Part 10 · Edition 10.2012 → current
Manholes made of concrete, steel fiber concrete and precast reinforced concrete · Manhole bases made of masonry for underground sewers and pipes · Requirements and tests
DIN 4034 - part 10 edition 10.1995 → replaced by edition 10.2012
Manholes made of precast concrete and reinforced concrete parts · Manhole bases made of masonry for underground sewers and pipes · Requirements and tests
DIN 4034 · Edition 10.1973 → replaced by DIN 4034 Part 1 Edition 9.1990 and DIN 4034 Part 2 Edition 10.1990
Manhole rings, well rings, manhole necks, transition rings, support rings made of concrete · Dimensions, technical delivery conditions
DIN 4035 edition 8.1995 → replaced by DIN EN 1916 edition 4.2003
Reinforced concrete pipes and associated fittings · Dimensions - Technical delivery conditions
The standard has now been replaced by the pre-standard DIN V 1201 editions 4.2003 and 8.2004 (current)
DIN 4035 edition 7.1990 → replaced by edition 8.1995, DIN EN 639 and DIN EN 640 editions 12.1994
Reinforced concrete pipes, reinforced concrete pressure pipes and associated fittings · Dimensions, technical delivery conditions
DIN 4035 edition 9.1976 → replaced by edition 7.1990
Reinforced concrete pipes, reinforced concrete pressure pipes and associated fittings made of reinforced concrete · Dimensions, technical delivery conditions
DIN 4040 - Part 100 · Edition 12.2016 → current
Separator systems for fats · Application regulations for separator systems for fats according to DIN EN 1825-1 and DIN EN 1825-2
DIN 4040 - Part 100 · Edition 12.2004 → replaced by Edition 12.2016
Separator systems for grease · Requirements for the use of separator systems according to DIN EN 1825-1 and DIN EN 1825-2
DIN 4040 - part 1 edition 3.1989 → replaced by DIN 4040 part 100 edition 12.2004, DIN EN 1825 part 1 edition 12.2004 and DIN EN 1825 part 2 edition 5.2002
Separator systems for grease · Terms, nominal sizes, requirements, tests
DIN 4040 - part 2 edition 3.1989 → replaced by DIN 4040 part 100 edition 12.2004, DIN EN 1825 part 1 edition 12.2004 and DIN EN 1825 part 2 edition 5.2002
Separator systems for grease · Dimensioning, installation and operation
The standard has meanwhile been replaced by the pre-standard DIN V 4040 Part 2 Edition 2.1999
DIN 4040 edition 1.1957 → replaced by DIN 4040 parts 1 and 2 edition 3.1989
Grease separator · Basic principles
DIN 4040 edition 12.1935 → replaced by edition 1.1957
Grease separator · Basic principles
DIN 4041 edition 1.1957 → replaced by DIN 4040 parts 1 and 2 edition 3.1989
Grease Traps · Installation, size and sludge traps, guidelines
DIN 4042 edition 2.1959 → replaced by DIN 4040 parts 1 and 2 edition 3.1989
Grease trap · test
DIN 4043 · Edition 10.1982 → replaced by DIN EN 1253 Part 5 Edition 3.2004
Barriers for light liquids (heating oil barriers) · Construction principles, installation and operation, tests
DIN 4044 · Edition 7.1980 → current
Hydromechanics in hydraulic engineering · Terms
DIN 4045 edition 11.2016 → current
Sewage technology · Basic terms
DIN 4045 edition 8.2003 → replaced by edition 11.2016
Sewage technology · Basic terms
DIN 4045 edition 12.1985 → replaced by edition 8.2003, DIN EN 752 part 1 edition 1.1996 and DIN EN 1085 edition 7.1997
Sewage engineering · Terms
DIN 4045 edition 12.1964 → replaced by edition 12.1985
Wastewater management · Technical terms and definitions
DIN 4046 edition 9.1983 → current
Water supply · Terms · Technical rule of the DVGW
DIN 4046 edition 4.1960 → replaced by edition 9.1983
Water supply · Terms and definitions
DIN 4047 - Part 1 · Edition 12.2015 → current
Agricultural hydraulic engineering · Terms · General terms
DIN 4047 - part 1 edition 1.1993 → replaced by edition 12.2015 and DIN 4047 part 3 edition 3.2002
Agricultural hydraulic engineering · Terms · General terms
DIN 4047 - Part 1 edition 3.1973 → replaced by edition 1.1993, DIN 4047 part 5 edition 3.1989, DIN 4047 part 6 edition 5.1989, DIN 4047 part 7 edition 1.1993 and DIN 4047 part 9 edition 1.1986
Agricultural hydraulic engineering · Terms, general terms, development of water bodies, irrigation, drainage
DIN 4047 - Part 2 Edition 11.1988 → current
Agricultural hydraulic engineering · Terms · Flood protection, coastal protection, pumping stations
DIN 4047 - Part 2 · Edition 5.1973 → replaced by Edition 11.1988
Agricultural hydraulic engineering · Terms, flood protection, coastal protection, pumping stations
DIN 4047 - Part 3 · Edition 3.2002 → current
Agricultural hydraulic engineering · Terms · Soil science, soil systematics and soil investigation
DIN 4047 - Part 3 · Edition 9.1985 → replaced by Edition 3.2002
Agricultural hydraulic engineering · Terms · Basics of soil science
DIN 4047 - part 3 edition 9.1971 → replaced by edition 9.1985 and DIN 4047 part 10 edition 9.1985
Agricultural hydraulic engineering · Terms, soil
DIN 4047 - Part 4 Edition 2.1998 → current
Agricultural hydraulic engineering · Terms · Bogs and bog soils
DIN 4047 - part 4 edition 7.1977 → replaced by edition 2.1998
Agricultural hydraulic engineering · Terms, bog culture
DIN 4047 - Part 5 Edition 3.1989 → current
Agricultural hydraulic engineering · Terms · Development and maintenance of water bodies
DIN 4047 - Part 6 Edition 11.2008 → current
Agricultural hydraulic engineering · Terms · Irrigation
DIN 4047 - Part 6 · Edition 5.1989 → replaced by Edition 11.2008
Agricultural hydraulic engineering · Terms · Irrigation
DIN 4047 - Part 7 Edition 1.1993 → current
Agricultural hydraulic engineering · Terms · Erosion protection
DIN 4047 - Part 9 Edition 1.1986 → current
Agricultural hydraulic engineering · Terms · Drainage, drainage
DIN 4047 - Part 10 Edition 9.1985 → replaced by DIN 4047 Part 3 Edition 3.2002
Agricultural hydraulic engineering · Terms · The soil as a plant location
DIN 4048 - Part 1 · Edition 1.1987 → current
Hydraulic engineering · Terms · Dams
DIN 4048 - Part 2 · Edition 7.1994 → current
Hydraulic engineering · Terms · Hydroelectric power plants
DIN 4048 · Edition 5.1957 → withdrawn
Hydropower and dam systems · Technical terms and definitions
DIN 4049 - Part 1 · Edition 12.1992 → current
Hydrology · Basic Concepts
DIN 4049 - Part 1 Edition 9.1979 → replaced by Edition 12.1992 and DIN 4049 Part 3 Edition 10.1994
Hydrology · Terms, quantitative
DIN 4049 - Part 2 · Edition 4.1990 → current
Hydrology · Terms of water quality
DIN 4049 - Part 2 · Edition 4.1960 → withdrawn
Hydrology · Technical terms and definitions · Part II: qualitative
DIN 4049 - Part 3 Edition 10.1994 → current
Hydrology · Terms related to quantitative hydrology
DIN 4049 - part 101 edition 4.1983 → replaced by DIN 4049 part 1 edition 12.1992 and DIN 4049 part 3 edition 10.1994
Hydrology · Terms of precipitation and snow cover
DIN 4050 edition 3.1960 → replaced by DIN 2425 part 4 edition 5.1980
Inventory plans of public sewers
DIN 4050 edition 3.1954 → replaced by edition 3.1960
Inventory plans of public sewers
DIN 4050 edition 10.1933 → replaced by edition 3.1954
Guideline for inventory plans for public drainage systems
DIN 4051 · Edition 4.2002 → current
Sewer clinker · Requirements, testing, monitoring
DIN 4051 edition 8.1976 → replaced by edition 4.2002
Sewer clinker · Requirements, testing, monitoring
DIN 4051 - Supplement · Edition 7.1965 → withdrawn
Sewer clinker · Application examples
DIN 4052 - Part 1 · Edition 5.2006 → current
Concrete parts and buckets for street gullies · General requirements and installation
DIN 4052 - Part 1 edition 9.1977 → replaced by edition 5.2006
Concrete parts and buckets for street gullies · Construction and installation
DIN 4052 - Part 2 · Edition 5.2006 → current
Concrete parts and buckets for street gullies · Compilations and names
DIN 4052 - Part 2 edition 9.1977 → replaced by edition 5.2006
Concrete parts and buckets for street gullies · Assemblies
DIN 4052 - Part 3 · Edition 5.2006 → current
Concrete parts and buckets for street gullies · Concrete parts
DIN 4052 - part 3 edition 9.1977 → replaced by edition 5.2006
Concrete parts and buckets for street gullies · Concrete parts
DIN 4052 - Part 4 · Edition 5.2006 → current
Concrete parts and buckets for street drains · Buckets
DIN 4052 - part 4 edition 9.1977 → replaced by edition 5.2006
Concrete parts and buckets for street drains · Buckets
DIN 4054 edition 9.1977 → current
Hydraulic engineering · Terms
DIN 4055 edition 2.1992 → current
Water pipes · Street cap for underground hydrants · Technical rule of the DVGW
DIN 4055 edition 11.1974 → replaced by edition 2.1992
Road caps for underground hydrants in sidewalks and lanes
DIN 4056 edition 2.1992 → current
Water pipes · Street caps for shut-off valves · Technical rules of the DVGW
DIN 4056 edition 11.1974 → replaced by edition 2.1992
Street caps for water shut-off valves in sidewalks and lanes
DIN 4057 Edition 2.1992 → current
Water pipes · Street cap for tapping fittings · Technical rule of the DVGW
DIN 4057 edition 11.1974 → replaced by edition 2.1992
Street cap for valves of tapping fittings in water pipes in sidewalks and lanes
DIN 4057 edition 9.1938 → replaced by edition 11.1974
Street cap for valves and taps in water pipes, sidewalks and lanes
DIN 4058 edition 4.1973 → replaced by DIN 3581 edition 8.1990
Local gas distribution lines · Street caps for shut-off devices, condensate collectors and control pipes
DIN 4060 edition 7.2016 → current
Pipe connections of sewers and sewers with elastomer seals · Requirements and tests for pipe connections that contain elastomer seals
DIN 4060 edition 2.1998 → replaced by edition 7.2016
Pipe connections of sewers and sewers with elastomer seals · Requirements and tests for pipe connections that contain elastomer seals
The standard has since been withdrawn without replacement and DIN 28617 edition 5.1976 is recommended
DIN 4060 edition 12.1988 → replaced by edition 2.1998, DIN EN 681 part 1 edition 12.1998 and DIN EN 681 part 3 edition 10.2000
Sealants made of elastomers for pipe connections in sewers and sewers · Requirements and tests
DIN 4060 - Part 1 Edition 3.1976 → replaced by DIN 4060 Edition 12.1988
Sealing rings made of elastomers for pipe connections in drainage channels and lines · Circular or similar effective cross sections · Requirements, tests, measurements
DIN 4062 edition 9.1978 → withdrawn
Cold processable plastic sealants for sewers and pipes · Sealants for components made of concrete, requirements, tests and processing
DIN 4063 · Edition 3.2016 → current
Information signs for civil defense
DIN 4063 edition 4.1989 → replaced by edition 3.2016
Information signs for civil defense
DIN 4063 · Edition 3.1981 → replaced by Edition 4.1989
Information signs for civil defense
DIN 4065 edition 1.1974 → current
Gas pipelines · Information signs
DIN 4065 edition 9.1939 → replaced by edition 1.1974
Information signs · Long-distance gas lines
DIN 4066 Edition 7.1997 → current
Information signs for the fire brigade
DIN 4066 edition 11.1984 → replaced by edition 7.1997
Information signs for fire protection
DIN 4066 edition 5.1984 → replaced by edition 11.1984
Information signs for fire protection
DIN 4066 - Part 1 · Edition 6.1972 → replaced by DIN 4066 Edition 5.1984
Information signs for extinguishing water
DIN 4066 - Part 2 edition 11.1974 → replaced by DIN 4066 edition 5.1984
Information signs for fire protection facilities
DIN 4067 edition 11.1975 → current
Water · Signs, local water distribution and water pipelines
DIN 4067 edition 2.1939 → replaced by edition 11.1975
Signs · Water
DIN 4068 · Edition 11.1975 → current
Sewage · Information signs
DIN 4068 edition 12.1938 → replaced by edition 11.1975
Information signs · Sewage
DIN 4069 · Edition 1.1974 → current
Local gas distribution lines · Information signs
DIN 4070 - Part 1 · Edition 1.1958 → withdrawn
Softwood · Cross-sectional dimensions and static values for sawn timber, square timber and roof battens
DIN 4070 - Part 2 Edition 10.1963 → withdrawn
Softwood · Cross-sectional dimensions and static values, dimensional and list goods
DIN 4071 - Part 1 · Edition 4.1977 → withdrawn
Unplaned boards and planks made of softwood · Dimensions
The application of DIN EN 1313 part 1 edition 11.1999 is recommended
DIN 4072 edition 8.1977 → current
Pounded boards made of softwood
DIN 4073 - Part 1 · Edition 4.1977 → withdrawn
Planed boards and planks made of softwood · Dimensions
DIN 4074 - Part 1 · Edition 6.2012 → current
Sorting wood according to load-bearing capacity · Softwood lumber
DIN 4074 - Part 1 · Edition 12.2008 → replaced by Edition 6.2012
Sorting wood according to load-bearing capacity · Softwood lumber
DIN 4074 - Part 1 · Edition 6.2003 → replaced by Edition 12.2008
Sorting wood according to load-bearing capacity · Softwood lumber
DIN 4074 - part 1 edition 9.1989 → replaced by edition 6.2003
Sorting of softwood according to load-bearing capacity · Softwood lumber
DIN 4074 - Part 1 · Edition 12.1958 → replaced by Edition 9.1989
Construction timber for wooden components Quality conditions for sawn timber (softwood)
DIN 4074 - Part 2 · Edition 12.1958 → current
Construction timber for wooden components Quality conditions for construction timber (softwood)
DIN 4074 - Part 3 · Edition 12.2008 → current
Sorting of timber according to load-bearing capacity · Apparatus to support the visual sorting of sawn timber · Requirements and testing
DIN 4074 - Part 3 · Edition 6.2003 → replaced by Edition 12.2008
Sorting wood according to load-bearing capacity · Sorting machines for sawn timber, requirements and testing
DIN 4074 - part 3 edition 9.1989 → replaced by edition 6.2003
Sorting of softwood according to load-bearing capacity · Sorting machines · Requirements and testing
DIN 4074 - Part 4 Edition 12.2008 → current
Sorting of wood according to the load-bearing capacity · Proof of suitability for equipment-supported sawn timber sorting
DIN 4074 - Part 4 · Edition 6.2003 → replaced by Edition 12.2008
Sorting of wood according to the load-bearing capacity · Evidence of suitability for machine sorting of sawn timber
DIN 4074 - part 4 edition 9.1989 → replaced by edition 6.2003
Sorting of softwood according to the load-bearing capacity · Proof of suitability for mechanical sorting of sawn timber
DIN 4074 - Part 5 · Edition 12.2008 → current
Sorting wood according to load-bearing capacity · Hardwood lumber
DIN 4074 - Part 5 · Edition 6.2003 → replaced by Edition 12.2008
Sorting wood according to load-bearing capacity · Hardwood lumber
DIN 4075 · Edition 7.1975 → withdrawn
Wood wool ropes
DIN 4076 - Part 1 Edition 10.1985 → withdrawn
Names and abbreviations in the wood field · Types of wood
The use of DIN EN 350 Part 2 Edition 10.1994 and DIN EN 13556 Edition 10.2003 is recommended
DIN 4076 - Part 1 · Edition 4.1970 → replaced by Edition 10.1985
Names and abbreviations in the wood field · Types of wood
DIN 4076 - Part 3 · Edition 1.1974 → withdrawn
Names and abbreviations in the wood field · Adhesives, types of gluing, stress groups for wood-glue joints
The use of DIN EN 204 edition 10.1991 and DIN EN 923 edition 5.1998 is recommended
DIN 4076 - Part 5 Edition 11.1981 → withdrawn
Names and abbreviations in the wood sector · Overview of the standardized abbreviations
The use of DIN EN 13556 edition 10.2003 is recommended
DIN 4077 edition 3.1976 → withdrawn
Wood wool
DIN 4078 edition 3.1979 → withdrawn
Plywood · preferred sizes
DIN 4079 Edition 6.2016 → current
Veneers · Thicknesses
DIN 4079 edition 5.1976 → replaced by edition 6.2016
Veneers · Thicknesses
DIN 4084 Edition 1.2009 → current
Ground · Land fracture calculations
DIN 4084 - supplement 1 edition 7.2012 → current
Ground · Ground fracture calculations · Calculation examples
DIN 4084 edition 7.1981 → replaced by edition 1.2009
Subsoil · Land and slope fracture calculations
DIN 4084 - Supplement 1 edition 7.1981 → replaced by edition 7.2012
Ground · Land and slope failure calculations · Explanations
DIN 4084 - supplement 2 edition 9.1983 → replaced by DIN 4084 supplement 1 edition 7.2012
Subsoil · Land and slope failure calculations · Calculation examples
DIN 4085 · Edition 5.2011 → current
Subsoil · Calculation of the earth pressure
DIN 4085 - supplement 1 edition 12.2011 → current
Subsoil · Calculation of the earth pressure · Calculation examples
DIN 4085 - Correction 1 · Edition 11.2008 → replaced by DIN 4085 Edition 5.2011
Subsoil · Calculation of the earth pressure · Correction to DIN 4085: 2007-10
DIN 4085 edition 10.2007 → replaced by edition 5.2011
Subsoil · Calculation of the earth pressure
DIN 4085 edition 2.1987 → replaced by edition 10.2007
Subsoil · Calculation of the earth pressure · Calculation bases
DIN 4085 - supplement 1 edition 2.1987 → replaced by edition 12.2011
Subsoil · Calculation of the earth pressure · Explanations
DIN 4085 - Supplement 1 edition 11.1982 → replaced by edition 2.1987
Subsoil · Calculation of the earth pressure for rigid retaining walls and abutments · Explanations
DIN 4085 - supplement 2 edition 6.1989 → replaced by DIN 4085 supplement 1 edition 12.2011
Subsoil · Calculation of the earth pressure · Calculation examples
DIN 4093 · Edition 11.2015 → current
Dimensioning of solidified bodies of soil · Manufactured using jet grouting, deep mixing or injection processes
DIN 4093 · Edition 8.2012 → replaced by Edition 11.2015
Dimensioning of solidified bodies of soil · Manufactured using jet grouting, deep mixing or injection processes
DIN 4093 edition 9.1987 → replaced by edition 8.2012 and DIN EN 12715 edition 10.2000
Subsoil · Pressing into the subsoil · Planning, execution, testing
DIN 4093 · Edition 6.1962 → withdrawn
Foundation · Pressings into the subsoil and structures · Guidelines for planning and execution
DIN 4094 - part 1 edition 6.2002 → replaced by DIN EN ISO 22476 part 1 edition 1.2013
Subsoil · Field investigations · Pressure soundings
DIN 4094 - Part 2 · Edition 5.2003 → current
Subsoil - field investigations · Borehole drilling
DIN 4094 - Part 3 Edition 1.2002 → replaced by DIN EN ISO 22476 Part 2 Edition 4.2005
Subsoil - field investigations · Drilling soundings
DIN 4094 - Part 4 Edition 1.2002 → current
Subsoil - field investigations · wing shear tests
DIN 4094 - Part 5 Edition 6.2001 → replaced by DIN EN ISO 22476 Parts 4, 5 and 7 Edition 3.2013
Subsoil - field investigations · Borehole expansion tests
DIN 4094 Edition 12.1990 → replaced by DIN 4094 Part 1 Edition 6.2002, DIN 4094 Part 2 Edition 5.2003 and DIN 4094 Part 3 Edition 1.2002
Building ground · Exploration through soundings
DIN 4094 - supplement 1 edition 12.1990 → replaced by DIN 4094 part 1 edition 6.2002, DIN 4094 part 2 edition 5.2003 and DIN 4094 part 3 edition 1.2002
Subsoil · Exploration through soundings · Application aids, explanations
DIN 4094 - Part 1 edition 11.1974 → replaced by DIN 4094 edition 12.1990
Subsoil · Piling and pressure probing devices · Dimensions and operation of the devices
DIN 4095 · Edition 6.1990 → current
Subsoil · Drainage for the protection of structures · Planning, dimensioning and execution
DIN 4095 edition 12.1973 → replaced by edition 6.1990
Subsoil · Drainage of the subsoil to protect structures · Planning and execution
DIN 4095 - Supplement · Edition 12.1973 → replaced by DIN 4095 Edition 6.1990
Subsoil · Drainage of the subsoil to protect structures · Planning and execution · Examples
DIN 4096 Edition 5.1980 → replaced by DIN 4094 Part 4 Edition 1.2002
Subsoil · wing sounding · dimensions of the device, mode of operation, evaluation
DIN 4099 - part 1 edition 8.2003 → replaced by DIN EN ISO 17660 parts 1 and 2 edition 12.2006
Welding of reinforcing steel · Execution
DIN 4099 - part 2 edition 8.2003 → replaced by DIN EN ISO 17660 parts 1 and 2 edition 12.2006
Welding reinforcing steel · Quality assurance
DIN 4099 edition 11.1985 → replaced by DIN 4099 parts 1 and 2 edition 8.2003
Welding reinforcing steel · Execution and testing
DIN 4099 - Part 1 edition 4.1972 → replaced by DIN 4099 edition 11.1985
Welding reinforcing steel · Requirements and tests
DIN 4100 Edition 12.1968 → replaced by DIN 18800 Part 1 Edition 3.1981, DIN 18800 Part 7 Edition 5.1983 and DIN 18801 Edition 9.1983
Welded steel structures with predominantly static loads · Calculation and structural design
DIN 4100 - supplement 1 edition 12.1968 → replaced by DIN 18800 part 7 edition 5.1983
Welded steel structures with predominantly static loads · Proof of qualification for welding steel structures, major certificate of proficiency
DIN 4100 - supplement 2 edition 12.1968 → replaced by DIN 18800 part 7 edition 5.1983
Welded steel structures with predominantly static loads · Evidence of the ability to weld simple steel structures with predominantly static loads, small certificate of proficiency
DIN 4100 edition 12.1956 → replaced by edition 12.1968
Welded steel structures · Calculation and structural design
DIN 4101 Edition 7.1974 → replaced by DIN 18800 Part 1 Edition 3.1981, DIN 18800 Part 7 Edition 5.1983 and DIN 18809 Edition 9.1987
Welded steel road bridges · Calculation and structural development
DIN 4102 - Part 1 - Correction 1 · Edition 8.1998 → withdrawn
Correction to DIN 4102-1: 1998-05
DIN 4102 - Part 1 · Edition 5.1998 → current
Fire behavior of building materials and components · Building materials · Terms, requirements and tests
DIN 4102 - Part 1 · Edition 5.1981 → replaced by Edition 5.1998 and DIN 4102 Parts 15 and 16 Edition 5.1990
Fire behavior of building materials and components · Building materials · Terms, requirements and tests
DIN 4102 - Part 1 · Edition 9.1977 → replaced by Edition 5.1981
Fire behavior of building materials and components · Building materials · Terms, requirements and tests
DIN 4102 - part 1 edition 11.1940 → replaced by DIN 4102 part 2 edition 9.1965 and DIN 4102 part 10 edition 10.1966
Resistance of building materials and components to fire and heat · Terms
DIN 4102 - Part 1 · Edition 8.1934 → replaced by Edition 11.1940
Resistance of building materials and components to fire and heat · Terms
DIN 4102 - Part 2 · Edition 9.1977 → current
Fire behavior of building materials and components · Components · Terms, requirements and tests
DIN 4102 - Part 2 · Edition 2.1970 → replaced by Edition 9.1977
Fire behavior of building materials and components · Terms, requirements and tests of components
DIN 4102 - Part 2 Edition 9.1965 → replaced by Edition 2.1970 and DIN 4102 Part 4 Edition 2.1970
Fire behavior of building materials and components · Terms, requirements and tests of components
DIN 4102 - part 2 edition 11.1940 → replaced by edition 9.1965, DIN 4102 part 4 edition 9.1965 and DIN 4102 part 10 edition 10.1966
Resistance of building materials and components to fire and heat · Classification in the terms
DIN 4102 - Part 2 · Edition 8.1934 → replaced by Edition 11.1940
Resistance of building materials and components to fire and heat · Classification in the terms
DIN 4102 - Part 3 · Edition 9.1977 → current
Fire behavior of building materials and components · Fire walls and non-load-bearing exterior walls · Terms, requirements and tests
DIN 4102 - Part 3 · Edition 2.1970 → replaced by Edition 9.1977 and DIN 4102 Parts 6 and 7 Edition 9.1977
Fire behavior of building materials and components · Terms, requirements and tests of special components
DIN 4102 - part 3 edition 11.1940 → replaced by edition 2.1970 and DIN 4102 part 10 edition 10.1966
Resistance of building materials and components to fire and heat · Fire tests
DIN 4102 - Part 3 · Edition 8.1934 → replaced by Edition 11.1940
Resistance of building materials and components to fire and heat · Fire tests
DIN 4102 - Part 4 · Edition 5.2016 → current
Fire behavior of building materials and components · Compilation and application of classified building materials, components and special components
DIN 4102 - Part 4 - Amendment A1 · Edition 11.2004 → replaced by DIN 4102 Part 4 Edition 5.2016
Fire behavior of building materials and components · Compilation and application of classified building materials, components and special components · Amendment A1
DIN 4102 - Part 4 - Correction 3 · Edition 9.1998 → replaced by DIN 4102 Part 4 Amendment A1 Edition 11.2004
Corrections to DIN 4102-4: 1994-03
DIN 4102 - Part 4 - Correction 2 · Edition 4.1996 → replaced by DIN 4102 Part 4 Amendment A1 Edition 11.2004
Corrections to DIN 4102-4: 1994-03
DIN 4102 - Part 4 - Correction 1 · Edition 5.1995 → replaced by DIN 4102 Part 4 Amendment A1 Edition 11.2004
Corrections to DIN 4102-4: 1994-03
DIN 4102 - Part 4 Edition 3.1994 → replaced by DIN 4102 Part 4 Amendment A1 Edition 11.2004
Fire behavior of building materials and components · Compilation and application of classified building materials, components and special components
DIN 4102 - Part 4 Edition 3.1981 → replaced by Edition 3.1994
Fire behavior of building materials and components · Compilation and application of classified building materials, components and special components
DIN 4102 - Part 4 · Edition 2.1970 → replaced by Edition 3.1981
Fire behavior of building materials and components · Classification in the terms
DIN 4102 - part 4 edition 9.1965 → replaced by edition 2.1970
Fire behavior of building materials and components · Classification in the terms
DIN 4102 - Part 5 Edition 9.1977 → current
Fire behavior of building materials and components · Fire protection barriers, closures in lift shaft walls and fire-resistant glazing · Terms, requirements and tests
DIN 4102 - Part 6 Edition 9.1977 → withdrawn
Fire behavior of building materials and components · Ventilation lines, terms, requirements and tests
The use of DIN EN 1366 part 1 edition 12.2014 and DIN EN 1366 part 2 edition 9.2015 is recommended.
DIN 4102 - Part 7 Edition 7.1998 → current
Fire behavior of building materials and components · Roofing · Terms, requirements and tests
DIN 4102 - Part 7 · Edition 3.1987 → replaced by Edition 7.1998
Fire behavior of building materials and components · Roofing · Terms, requirements and tests
DIN 4102 - Part 7 Edition 9.1977 → replaced by Edition 3.1987
Fire behavior of building materials and components · Roofing · Terms, requirements and tests
DIN 4102 - Part 8 · Edition 10.2003 → current
Fire behavior of building materials and components · Small test bench
DIN 4102 - Part 8 · Edition 5.1986 → replaced by Edition 10.2003
Fire behavior of building materials and components · Small test bench
DIN 4102 - Part 9 · Edition 5.1990 → current
Fire behavior of building materials and components · Cable insulation · Terms, requirements and tests
DIN 4102 - part 10 edition 10.1966 → replaced by DIN 4102 part 3 edition 2.1970 and DIN 4102 part 1 edition 9.1977
Fire behavior of building materials and components · Supplementary provisions
DIN 4102 - Part 11 · Edition 12.1985 → current
Fire behavior of building materials and components · Pipe jackets, pipe bulkheads, installation shafts and ducts as well as closures of their inspection openings · Terms, requirements and tests
DIN 4102 - Part 12 Edition 11.1998 → current
Fire behavior of building materials and components · Function maintenance of electrical cable systems · Requirements and tests
DIN 4102 - Part 12 Edition 1.1991 → replaced by Edition 11.1998
Fire behavior of building materials and components · Function maintenance of electrical cable systems · Requirements and tests
DIN 4102 - Part 13 · Edition 5.1990 → current
Fire behavior of building materials and components · Fire protection glazing · Terms, requirements and tests
DIN 4102 - Part 14 · Edition 5.1990 → current
Fire behavior of building materials and components · Floor coverings and floor coatings · Determination of flame spread when exposed to a radiant heater
DIN 4102 - Part 15 · Edition 5.1990 → current
Fire behavior of building materials and components · Brandschacht
DIN 4102 - Part 16 · Edition 9.2015 → current
Fire behavior of building materials and components · Carrying out fire shaft tests
DIN 4102 - Part 16 · Edition 5.1998 → replaced by Edition 9.2015 and DIN EN 13238 Edition 12.2001
Fire behavior of building materials and components · Carrying out fire shaft tests
DIN 4102 - Part 16 · Edition 5.1990 → replaced by Edition 5.1998
Fire behavior of building materials and components · Carrying out fire shaft tests
DIN 4102 - Part 17 · Edition 12.2017 → current
Fire behavior of building materials and components · Melting point of mineral wool insulation materials · Terms, requirements and testing
DIN 4102 - Part 17 Edition 12.1990 → replaced by Edition 12.2017
Fire behavior of building materials and components · Melting point of mineral fiber insulation materials · Terms, requirements, testing
DIN 4102 - Part 18 · Edition 3.1991 → current
Fire behavior of building materials and components · Fire protection barriers · Proof of the property "self-closing" (long-term function test)
DIN 4102 - Part 22 Edition 11.2004 → replaced by DIN 4102 Part 4 Edition 5.2016
Fire behavior of building materials and components · Application standard for DIN 4102-4 based on the design of partial safety factors
DIN 4102 - Supplement 1 · Edition 5.1981 → withdrawn
Fire behavior of building materials and components · Table of contents
DIN 4102 - Supplement 1 · Edition 2.1978 → replaced by Edition 5.1981
Fire behavior of building materials and components · Table of contents
DIN 4103 - Part 1 · Edition 6.2015 → current
Non-load-bearing internal partition walls · Requirements and evidence
DIN 4103 - Part 1 · Edition 7.1984 → replaced by Edition 6.2015
Non-load-bearing internal partition walls · Requirements, evidence
DIN 4103 - Part 2 · Edition 11.2010 → current
Non-load-bearing internal partitions · Partitions made from gypsum blocks
DIN 4103 - Part 2 · Edition 12.1985 → replaced by Edition 11.2010
Non-load-bearing internal partitions · Partitions made from gypsum blocks
DIN 4103 - Part 4 Edition 11.1988 → current
Non-load-bearing inner partition walls · Substructure in wood construction
DIN 4103 · Edition 6.1950 → replaced by DIN 4103 Part 1 Edition 7.1984
Lightweight Partitions · Guidelines for Execution
DIN 4107 - part 1 edition 1.2011 → replaced by DIN EN ISO 18674 part 1 edition 9.2015
Geotechnical measurements · Basics
Correction of the edition 10.2010
DIN 4107 - Part 1 · Edition 10.2010 → replaced by Edition 1.2011
Geotechnical measurements · Basics
DIN 4107 - Part 2 Edition 3.2011 → replaced by DIN EN ISO 18674 Part 2 Edition 3.2017
Geotechnical measurements · Extensometer and convergence measurements
DIN 4107 - Part 3 · Edition 3.2011 → current
Geotechnical measurements · Inclinometer and deflectometer measurements
DIN 4107 - Part 4 · Edition 2.2012 → current
Geotechnical measurements · Pressure pad measurements
DIN 4107 edition 1.1978 → replaced by DIN 4107 part 1 edition 10.2010, DIN 4107 parts 2 and 3 edition 3.2011 and DIN 4107 part 4 edition 2.2012
Subsoil · Settlement observations on emerging and finished structures
DIN 4107 edition 7.1969 → replaced by edition 1.1978
Subsoil · Settlement observations on emerging and finished structures
DIN 4107 edition 2.1937 → replaced by edition 7.1969
Guidelines for observing the movements of emerging and finished structures
DIN 4108 - Supplement 2 · Edition 3.2006 → current
Thermal insulation and energy savings in buildings · Thermal bridges · Planning and design examples
DIN 4108 - supplement 2 edition 1.2004 → replaced by edition 3.2006
Thermal insulation and energy savings in buildings · Thermal bridges · Planning and design examples
DIN 4108 - Supplement 2 Edition 8.1998 → replaced by Edition 1.2004
Thermal insulation and energy savings in buildings · Thermal bridges · Planning and design examples
DIN 4108 - supplement 1 edition 4.1982 → withdrawn
Thermal insulation in building construction · Table of contents · Index
DIN 4108 - Part 1 · Edition 8.1981 → withdrawn
Thermal insulation in building construction · Sizes and units
DIN 4108 - Part 2 · Edition 2.2013 → current
Thermal insulation and energy savings in buildings · Minimum requirements for thermal insulation
DIN 4108 - part 2 edition 7.2003 → replaced by edition 2.2013
Thermal insulation and energy savings in buildings · Minimum requirements for thermal insulation
Correction of the 4.2003 edition
DIN 4108 - Part 2 · Edition 4.2003 → replaced by Edition 7.2003
Thermal insulation and energy savings in buildings · Minimum requirements for thermal insulation
DIN 4108 - Part 2 · Edition 3.2001 → replaced by
Thermal insulation and energy savings in buildings · Minimum requirements for thermal insulation
DIN 4108 - Part 2 edition 8.1981 → replaced by DIN 4108 edition 8.1969
Thermal insulation in building construction · Thermal insulation and heat storage · Requirements and information for planning and execution
DIN 4108 - Part 3 · Edition 11.2014 → current
Thermal insulation and energy savings in buildings · Climate-related moisture protection · Requirements, calculation methods and instructions for planning and implementation
DIN 4108 - Part 3 - Correction 1 · Edition 4.2002 → replaced by DIN 4108 Part 3 Edition 11.2014
Corrections to DIN 4108-3: 2001-07
DIN 4108 - Part 3 Edition 7.2001 → replaced by Edition 11.2014 and DIN EN ISO 13788 Edition 11.2001
Thermal insulation and energy savings in buildings · Climate-related moisture protection · Requirements, calculation methods and instructions for planning and implementation
DIN 4108 - Part 3 · Edition 8.1981 → replaced by Edition 7.2001
Thermal insulation in building construction · Climate-related moisture protection · Requirements and information for planning and execution
DIN 4108 - Part 4 · Edition 3.2017 → current
Thermal insulation and energy savings in buildings · Thermal and moisture protection rated values
DIN 4108 - Part 4 · Edition 2.2013 → replaced by Edition 3.2017
Thermal insulation and energy savings in buildings · Thermal and moisture protection rated values
DIN 4108 - part 4 edition 11.1991 → replaced by DIN V 4108 part 4 edition 3.1998
Thermal insulation in building construction · Thermal and moisture protection characteristics
DIN 4108 - part 4 edition 12.1985 → replaced by edition 11.1991
Thermal insulation in building construction · Thermal and moisture protection characteristics
DIN 4108 - Part 4 Edition 8.1981 → replaced by Edition 12.1985
Thermal insulation in building construction · Thermal and moisture protection characteristics
DIN 4108 - part 5 edition 8.1981 → replaced by DIN 4108 part 3 edition 7.2001, DIN EN ISO 6946 edition 11.1996 and DIN EN ISO 10211 part 2 edition 6.2001
Thermal insulation in building construction · Calculation method
DIN 4108 - Part 7 · Edition 1.2011 → current
Thermal insulation and energy saving in buildings · Airtightness of buildings · Requirements, planning and implementation recommendations and examples
DIN 4108 - Part 7 · Edition 8.2001 → replaced by Edition 1.2011
Thermal insulation and energy saving in buildings · Airtightness of buildings · Requirements, planning and implementation recommendations and examples
DIN 4108 - Part 10 · Edition 12.2015 → current
Thermal insulation and energy savings in buildings · Application-related requirements for thermal insulation materials · Factory-made thermal insulation materials
DIN 4108 - Part 10 · Edition 6.2008 → replaced by Edition 12.2015
Thermal insulation and energy savings in buildings · Application-related requirements for thermal insulation materials · Factory-made thermal insulation materials
DIN 4108 - Supplement · Edition 11.1975 → withdrawn
Thermal insulation in building construction · Explanations and examples for increased thermal insulation
DIN 4108 edition 8.1969 → replaced by DIN 4108 parts 1, 2, 3, 4 and 5 edition 8.1981
Thermal insulation in building construction
DIN 4108 · Edition 5.1960 → replaced by Edition 8.1969
Thermal insulation in building construction
DIN 4108 edition 7.1952 → replaced by edition 5.1960
Thermal insulation in building construction
DIN 4109 - supplement 2 edition 11.1989 → current
Soundproofing in building construction · Advice on planning and implementation · Suggestions for increased soundproofing · Recommendations for soundproofing in one's own living or working area
DIN 4109 - Supplement 3 · Edition 6.1996 → current
Noise protection in building construction · Calculation of R ' w, R for the proof of suitability according to DIN 4109 from values of the sound reduction index R w determined in the laboratory
DIN 4109 - Part 1 · Edition 1.2018 → current
Sound insulation in building construction · Minimum requirements
DIN 4109 - Part 1 edition 7.2016 → replaced by edition 1.2018
Sound insulation in building construction · Minimum requirements
DIN 4109 - Part 2 · Edition 1.2018 → current
Noise protection in building construction · Mathematical evidence of compliance with the requirements
DIN 4109 - Part 2 Edition 7.2016 → replaced by Edition 1.2018
Noise protection in building construction · Mathematical evidence of compliance with the requirements
DIN 4109 - Part 4 Edition 7.2016 → current
Sound insulation in building construction · Building acoustics tests
DIN 4109 - part 11 edition 5.2010 → replaced by DIN 4109 part 4 edition 7.2016
Sound insulation in building construction · Proof of sound insulation · Quality and suitability test
DIN 4109 - part 11 edition 9.2003 → replaced by edition 5.2010
Sound insulation in building construction · Proof of sound insulation · Quality and suitability test
DIN 4109 - Part 31 Edition 7.2016 → current
Noise protection in building construction · Data for the arithmetical evidence of noise protection (component catalog) · Framework document
DIN 4109 - Part 32 Edition 7.2016 → current
Sound insulation in building construction · Data for the arithmetical evidence of sound insulation (component catalog) · Solid construction
DIN 4109 - Part 33 Edition 7.2016 → current
Sound insulation in building construction · Data for the arithmetical evidence of sound insulation (component catalog) · Wood, lightweight and dry construction
DIN 4109 - Part 34 Edition 7.2016 → current
Noise protection in building construction · Data for the arithmetical evidence of noise protection (component catalog) · Attachment structures in front of solid components
DIN 4109 - Part 35 · Edition 7.2016 → current
Sound insulation in building construction · Data for the mathematical proof of sound insulation (component catalog) · Elements, windows, doors, curtain walls
DIN 4109 - Part 36 · Edition 7.2016 → current
Sound insulation in building construction · Data for the arithmetical evidence of sound insulation (component catalog) · Building technology systems
DIN 4109 - supplement 1 - amendment A2 · edition 9.2010 → replaced by DIN 4109 parts 2, 32, 33, 34, 35 and 36 edition 7.2016
Sound insulation in building construction · Examples and calculation methods · Amendment A2
DIN 4109 - Supplement 1 - Amendment A1 edition 9.2003 → replaced by DIN 4109 parts 2, 32, 33, 34, 35 and 36 edition 7.2016
Noise protection in building construction · Examples and calculation methods · Amendment A1
DIN 4109 - amendment A1 edition 1.2001 → replaced by DIN 4109 parts 1, 2 and 4 editions 7.2016
Sound insulation in building construction · Requirements and evidence · Amendment A1
DIN 4109 - Correction 1 edition 8.1992 → replaced by DIN 4109 parts 1, 2, 4, 32, 33, 34, 35 and 36 edition 7.2016
Corrections to DIN 4109 / 11.89, DIN 4109 Bbl 1 / 11.89 and DIN 4109 Bbl 2 / 11.89
DIN 4109 edition 11.1989 → replaced by DIN 4109 parts 1, 2 and 4 edition 7.2016
Sound insulation in building construction · Requirements and evidence
DIN 4109 - supplement 1 edition 11.1989 → replaced by DIN 4109 parts 2, 32, 33, 34, 35 and 36 edition 7.2016
Sound insulation in building construction · Examples and calculation methods
DIN 4109 - Part 1 edition 9.1962 → replaced by DIN 4109 edition 11.1989
Sound insulation in building construction · Terms
DIN 4109 - Part 2 · Edition 9.1962 → replaced by DIN 4109 Edition 11.1989 and DIN 4109 Supplement 2 Edition 11.1989
Sound insulation in building construction · Requirements
DIN 4109 - Part 3 Edition 9.1962 → replaced by DIN 4109 Supplement 1 Edition 11.1989
Sound insulation in building construction · Examples
DIN 4109 - part 4 edition 9.1962 → replaced by DIN 18560 part 2 edition 8.1981
Sound insulation in building construction · Floating screeds on solid ceilings · Guidelines for execution
DIN 4109 - Part 5 · Edition 4.1963 → replaced by DIN 4109 supplements 1 and 2, edition 11.1989
Sound insulation in building construction · Explanations
DIN 4109 · edition 4.1944 → replaced by DIN 4109 parts 1, 2, 3 and 4 edition 9.1962 and DIN 4109 part 5 edition 4.1963
Guidelines for sound insulation in building construction
DIN 4111 edition 10.1995 → withdrawn
Drilling frames · Calculation bases (proposal for a European standard)
The use of DIN EN ISO 13626 edition 9.2005 is recommended
DIN 4111 edition 3.1984 → replaced by edition 10.1995
Drilling frames · Basis of calculation
DIN 4112 - Amendment A1 edition 3.2006 → replaced by DIN EN 13782 edition 5.2006
Temporary structures · Guidelines for dimensioning and execution · Amendment A1
DIN 4112 edition 2.1983 → replaced by DIN EN 13814 edition 6.2005 and DIN EN 13782 edition 5.2006
Temporary structures · Guidelines for dimensioning and execution
DIN 4113 - Part 2 - Correction 1 · Edition 12.2008 → replaced by DIN EN 1999 Part 1-1 Edition 5.2010 and DIN EN 1999 Part 1-1 National Annex Edition 12.2010
Aluminum constructions under predominantly static load · Calculation of welded aluminum constructions · Correction to DIN 4113-2: 2002-09
DIN 4113 - Part 2 · Edition 9.2002 → replaced by DIN EN 1999 Part 1-1 Edition 5.2010 and DIN EN 1999 Part 1-1 National Annex Edition 12.2010
Aluminum structures under predominantly static loads · Calculation of welded aluminum structures
DIN 4113 - Part 1 - Amendment A1 - Correction 1 · Edition 12.2008 → replaced by DIN EN 1999 Part 1-1 Edition 5.2010 and DIN EN 1999 Part 1-1 National Annex Edition 12.2010
Aluminum structures under predominantly static loads · Calculation and structural design · Amendment A1 · Correction to DIN 4113-1 / A1: 2002-09
DIN 4113 - Part 1 - Amendment A1 · Edition 9.2002 → replaced by DIN EN 1999 Part 1-1 Edition 5.2010 and DIN EN 1999 Part 1-1 National Annex Edition 12.2010
Aluminum structures under predominantly static loads · Calculation and structural design · Change A1
DIN 4113 - part 1 edition 5.1980 → replaced by DIN EN 1999 part 1-1 edition 5.2010
Aluminum structures under predominantly static loads · Calculation and structural design
DIN 4113 edition 2.1958 → replaced by DIN 4113 part 1 edition 5.1980 and DIN 4113 part 2 edition 9.2002
Aluminum in building construction · Guidelines for the calculation and execution of aluminum components
DIN 4114 - part 2 edition 2.1953 → replaced by DIN 18800 parts 2 and 3 edition 11.1990
Steel construction · Stability cases (buckling, tilting, buckling) · Calculation bases · Guidelines
DIN 4114 - Part 2 · Edition 7.1952 → replaced by Edition 2.1953
Steel construction · Stability cases (buckling, tilting, buckling) · Calculation bases · Guidelines
DIN 4114 - part 1 edition 7.1952 → replaced by DIN 18800 parts 2 and 3 edition 11.1990
Steel construction · Stability cases (buckling, tilting, buckling) · Calculation bases · Regulations
DIN 4115 edition 8.1950 → replaced by DIN 55928 part 8 edition 3.1980, DIN 18801 edition 9.1983 and DIN 18808 edition 10.1984
Lightweight steel construction and tubular steel construction in building construction · Guidelines for approval, execution, dimensioning
DIN 4117 edition 11.1960 → replaced by DIN 18195 parts 1, 2, 3, 4, 8, 9 and 10 edition 8.1983
Sealing of structures against soil moisture · Guidelines for execution
DIN 4117 edition 6.1950 → replaced by edition 11.1960
Sealing of high-rise buildings against moisture in the ground · Guidelines
DIN 4118 Edition 6.1981 → current
Headframes and headframes for mining · Load assumptions, calculation and construction principles
DIN 4119 - Part 1 edition 6.1979 → replaced by DIN EN 14015 edition 2.2005, DIN EN 14620 parts 1, 2, 3, 4 and 5 editions 12.2005 and DIN EN 1993 part 4-2 edition 8.2007
Above-ground cylindrical flat-bottom tank structures made of metallic materials · Fundamentals, execution, tests
DIN 4119 - Part 1 · Edition 10.1961 → replaced by Edition 6.1979
Above-ground cylindrical steel tank structures · Calculation bases
DIN 4119 - part 2 edition 2.1980 → replaced by DIN EN 14015 edition 2.2005, DIN EN 14620 parts 1, 2, 3, 4 and 5 editions 12.2005 and DIN EN 1993 part 4-2 edition 8.2007
Above-ground cylindrical flat-bottom tank structures made of metallic materials · Calculation
DIN 4119 - Part 2 · Edition 10.1961 → replaced by Edition 2.1980
Above-ground cylindrical steel tank structures · Explanations and notes on the calculation bases
DIN 4121 Edition 7.1978 → current
Hanging wire plaster ceilings · Plaster ceilings with metal plaster supports, Rabitz ceilings · Requirements for execution
DIN 4122 edition 3.1978 → replaced by DIN 18195 parts 1, 2, 3, 5, 8, 9 and 10 edition 8.1983
Sealing of structures against non-pressing surface water and seepage water, with bituminous materials, metal strips and plastic foils · Guidelines
DIN 4122 edition 7.1968 → replaced by edition 3.1978
Sealing of structures against non-pressing surface water and seepage water with bituminous materials, metal strips and plastic foils · Guidelines
DIN 4123 · Edition 4.2013 → current
Excavations, foundations and underpinnings in the area of existing buildings
DIN 4123 edition 5.2011 → replaced by edition 4.2013
Excavations, foundations and underpinnings in the area of existing buildings
DIN 4123 edition 9.2000 → replaced by edition 5.2011
Excavations, foundations and underpinnings in the area of existing buildings
DIN 4123 edition 5.1972 → replaced by edition 9.2000
Building security in the area of excavations, foundations and underpinnings
DIN 4124 edition 1.2012 → current
Construction pits and trenches · Embankments, shoring, working area widths
DIN 4124 edition 10.2002 → replaced by edition 1.2012
Construction pits and trenches · Embankments, shoring, working area widths
DIN 4124 edition 8.1981 → replaced by edition 10.2002
Construction pits and trenches · Embankments, working area widths, sheeting
DIN 4124 edition 1.1972 → replaced by edition 8.1981
Construction pits and trenches · Embankments, working area widths, sheeting
DIN 4125 edition 11.1990 → replaced by DIN 1054 edition 1.2003 and DIN EN 1537 edition 1.2001
Ground anchors · Temporary anchors and permanent anchors · Dimensioning, execution and testing
DIN 4125 - Part 1 edition 3.1988 → replaced by DIN 4125 edition 11.1990
Grouted anchor · Short-term anchor · Dimensioning, execution and testing
DIN 4125 - Part 1 · Edition 6.1972 → replaced by Edition 3.1988
Ground and rock anchors · Grouting anchors for temporary purposes in loose rock · Dimensioning, execution and testing
DIN 4125 - Part 2 · Edition 2.1976 → replaced by DIN 4125 Edition 11.1990
Ground and rock anchors · Grouting anchors for permanent anchoring (permanent anchors) in loose rock · Dimensioning, execution and testing
DIN 4126 edition 9.2013 → current
Proof of the stability of diaphragm walls
DIN 4126 - supplement 1 edition 9.2013 → current
Proof of the stability of diaphragm walls · Explanations
DIN 4126 edition 8.1986 → replaced by edition 9.2013 and DIN EN 1538 edition 7.2000
In-situ concrete diaphragm walls · Construction and execution
DIN 4127 edition 2.2014 → current
Earthworks and foundation engineering · Test methods for supporting fluids in diaphragm wall construction and for their raw materials
DIN 4127 edition 8.1986 → replaced by edition 2.2014
Earthworks and foundation work · Diaphragm wall clays for supporting fluids · Requirements, test methods, delivery, quality control
DIN 4128 edition 4.1983 → replaced by DIN 1054 edition 1.2005 and DIN EN 14199 edition 5.2005
Injection piles (in-situ concrete and composite piles) with small diameters · Manufacture, dimensioning and permissible loads
DIN 4131 Edition 11.1991 → replaced by DIN EN 1993 Part 3-1 National Annex Edition 11.2015
Antenna structures made of steel
The standard has now been replaced by the pre-standard DIN V 4131 edition 9.2008.
DIN 4131 edition 3.1969 → replaced by edition 11.1991
Antenna structures made of steel · Calculation and execution
DIN 4132 edition 2.1981 → replaced by DIN EN 1993 part 6 edition 12.2010 including the national annex edition 12.2010
Crane tracks · Steel structures · Principles for calculation, structural design and execution
DIN 4132 - supplement 1 edition 2.1981 → replaced by DIN EN 1993 part 6 edition 12.2010 including the national annex edition 12.2010
Crane tracks · Steel structures · Principles for calculation, structural design and execution · Explanations
DIN 4132 edition 2.1980 → replaced by edition 2.1981
Crane tracks · Steel structures · Principles for calculation, structural design and execution
DIN 4133 edition 11.1991 → replaced by DIN EN 13084 edition 8.1973 and DIN EN 1993 Part 3-2 edition 12.2010 including the national annex edition 11.2015
Steel chimneys
The standard has now been replaced by the pre-standard DIN V 4133 edition 7.2007.
DIN 4133 edition 8.1973 → replaced by edition 11.1991
Steel chimneys · Static calculation and execution
DIN 4134 edition 2.1983 → current
Air-supported structures · Calculation, execution and operation
DIN 4140 · Edition 4.2014 → current
Insulation work on technical systems in industry and in technical building equipment · Execution of heat and cold insulation
DIN 4140 edition 3.2008 → replaced by edition 4.2014
Insulation work on technical systems in industry and in technical building equipment · Execution of heat and cold insulation
Correction of edition 3.2007
DIN 4140 edition 3.2007 → replaced by edition 3.2008
Insulation work on technical systems in industry and in technical building equipment · Execution of heat and cold insulation
DIN 4140 edition 11.1996 → replaced by edition 3.2007
Insulation work on industrial and building services systems · Execution of heat and cold insulation
DIN 4140 - Part 1 edition 8.1983 → replaced by DIN 4140 edition 11.1996
Insulation of technical systems · Thermal insulation
DIN 4140 - Part 2 · Edition 6.1986 → replaced by DIN 4140 Edition 11.1996
Insulation of technical systems · Cold insulation
DIN 4141 - part 1 edition 9.1984 → replaced by DIN EN 1337 part 1 edition 2.2001
Warehouses in construction · General regulations
DIN 4141 - Part 2 - Amendment A1 · Edition 5.2003 → withdrawn
Storage in construction · Storage for engineering structures in the course of traffic routes (bridges) · Amendment A1
DIN 4141 - Part 2 · Edition 9.1984 → withdrawn
Storage in construction storage for engineering structures in the course of traffic routes (bridges)
DIN 4141 - Part 3 · Edition 9.1984 → withdrawn
Warehouses in construction · Storage for buildings
DIN 4141 - part 4 edition 10.1987 → replaced by DIN EN 1337 part 11 edition 4.1998
Warehouses in construction · Transport, temporary storage and installation
DIN 4141 - Part 13 · Edition 7.2010 → current
Bearings in construction · Guide bearings with the sliding combination of steel and steel · Dimensioning and manufacture
DIN 4141 - Part 14 - Amendment A1 - Correction 1 · Edition 2.2005 → replaced by DIN EN 1337 Part 3, Edition 7.2005
Corrections to DIN 4141-14 / A1: 2003-05
DIN 4141 - Part 14 - Amendment A1 · Edition 5.2003 → replaced by DIN EN 1337 Part 3 Edition 7.2005
Bearings in construction · Reinforced elastomer bearings · Structural design and dimensioning · Amendment A1
DIN 4141 - part 14 edition 9.1985 → replaced by DIN EN 1337 part 3 edition 7.2005
Bearings in construction · Reinforced elastomer bearings · Structural design and dimensioning
DIN 4141 - Part 15 Edition 1.1991 → replaced by DIN EN 1337 Part 3 Edition 7.2005
Bearings in the building industry · Unreinforced elastomer bearings · Structural design and dimensioning
DIN 4141 - Part 140 - Amendment A1 · Edition 5.2003 → replaced by DIN EN 1337 Part 3 Edition 7.2005
Bearings in construction · Reinforced elastomer bearings · Building materials, requirements, tests and monitoring · Amendment A1
DIN 4141 - part 140 edition 1.1991 → replaced by DIN EN 1337 part 3 edition 7.2005
Bearings in construction · Reinforced elastomer bearings · Building materials, requirements, tests and monitoring
DIN 4141 - part 150 edition 1.1991 → replaced by DIN EN 1337 part 3 edition 7.2005
Bearings in construction · Unreinforced elastomer bearings · Building materials, requirements, tests and monitoring
DIN 4149 · Edition 4.2005 → replaced by DIN EN 1998 Part 1 Edition 12.2010 including the national annex 1.2011 and Part 5 edition 12.2010 including the national annex edition 7.2011
Buildings in German earthquake areas · Load assumptions, dimensioning and execution of common high-rise buildings
DIN 4149 - Part 1 - Amendment A1 · Edition 12.1992 → replaced by DIN 4149 Edition 4.2005
Buildings in German earthquake areas · Load assumptions, dimensioning and execution of common building structures · Map of the earthquake zones
DIN 4149 - Part 1 · Edition 4.1981 → replaced by DIN 4149 Edition 4.2005
Buildings in German earthquake areas · Load assumptions, dimensioning and execution
DIN 4149 - Part 1 - Supplement 1 · Edition 4.1981 → replaced by DIN 4149 Edition 4.2005
Buildings in German earthquake areas · Allocation of administrative areas to the earthquake zones
DIN 4149 Edition 7.1957 → replaced by DIN 4149 Part 1 Edition 4.1981
Buildings in German earthquake areas · Guidelines for dimensioning and execution
DIN 4150 - Part 1 · Edition 6.2001 → current
Vibrations in construction · Preliminary determination of vibration quantities
DIN 4150 - Part 2 · Edition 6.1999 → current
Vibrations in construction · Effects on people in buildings
DIN 4150 - Part 2 · Edition 12.1992 → replaced by Edition 6.1999
Vibrations in construction · Effects on people in buildings
DIN 4150 - Part 3 · Edition 12.2016 → current
Vibrations in the building industry · Effects on structures
DIN 4150 - part 3 edition 2.1999 → replaced by edition 12.2016
Vibrations in the building industry · Effects on the structure
DIN 4150 - Part 3 · Edition 5.1986 → replaced by Edition 2.1999
Vibrations in the building industry · Effects on structures
DIN 4150 · Edition 7.1939 → replaced by DIN 4150 Part 1 Edition 6.2001, DIN 4150 Part 2 Edition 12.1992 and DIN 4150 Part 3 Edition 5.1986
Vibration protection in construction
In the meantime replaced by the preliminary standards DIN 4150 parts 1, 2 and 3, edition 9.1975
DIN 4152 edition 3.1943 → replaced by DIN 18151 edition 9.1952
Hollow blocks and T-stones made of natural pumice concrete
DIN 4153 edition 3.1943 → replaced by DIN 18151 edition 9.1952
Hollow blocks and T-stones made of pumice concrete or lightweight concrete with equivalent porous aggregates
DIN 4154 edition 3.1943 → replaced by DIN 18151 edition 9.1952
Hollow blocks made of slag concrete
DIN 4155 edition 10.1945 → replaced by 18151 edition 9.1952
Hollow blocks and T-stones made of brick gravel concrete
DIN 4156 edition 5.1943 → replaced by DIN 1053 edition 12.1952
Masonry made of lightweight concrete blocks · Principles for execution
DIN 4158 · Edition 5.1978 → withdrawn
Intermediate components made of concrete, for reinforced concrete and prestressed concrete ceilings
DIN 4158 edition 3.1971 → replaced by edition 5.1978
Intermediate components made of concrete for reinforced concrete and prestressed concrete ceilings
DIN 4158 edition 4.1943 → replaced by edition 3.1971
Ceiling hollow body made of lightweight concrete for reinforced concrete rib ceilings
DIN 4159 · Edition 5.2014 → current
Bricks for brick ceilings and grouting panels, statically active
DIN 4159 - Correction 1 Edition 6.2000 → replaced by DIN 4159 Edition 5.2014 and DIN EN 15037 Part 3 Edition 7.2011
Corrections to DIN 4159: 1999-10
DIN 4159 edition 10.1999 → replaced by edition 5.2014 and DIN EN 15037 part 3 edition 7.2011
Bricks for ceilings and grouting panels, statically active
DIN 4159 edition 4.1978 → replaced by edition 10.1999
Bricks for ceilings and wall panels, statically active
DIN 4159 edition 10.1972 → replaced by edition 4.1978
Bricks for ceilings and wall panels, statically active
DIN 4159 edition 2.1962 → replaced by edition 10.1972
Ceiling tile, statically active
DIN 4159 edition 5.1943 → replaced by edition 2.1962
Perforated brick for steel stone ceilings
DIN 4160 · Edition 4.2000 → current
Bricks for ceilings, not structurally involved
DIN 4160 edition 8.1978 → replaced by edition 4.2000
Bricks for ceilings, not structurally involved
DIN 4160 edition 2.1962 → replaced by edition 8.1978
Ceiling tile - static, not cooperative
DIN 4160 edition 5.1943 → replaced by edition 2.1962
Perforated brick for reinforced concrete rib ceilings
DIN 4163 edition 2.1951 → replaced by DIN 1045 edition 1.1972
Brick chippings · Regulations for production and use
DIN 4164 edition 10.1951 → withdrawn
Aerated and foam concrete · Production, use and testing, guidelines
DIN 4165 edition 11.1996 → replaced by DIN EN 771 part 4 edition 5.2005
Aerated concrete blocks and aerated concrete flat blocks
In the meantime replaced by the preliminary standard DIN V 4165 edition 6.2003
DIN 4165 edition 12.1986 → replaced by edition 11.1996
Aerated concrete blocks and aerated concrete flat blocks
DIN 4165 edition 9.1982 → replaced by edition 12.1986
Aerated concrete blocks
DIN 4166 · Edition 10.1997 → current
Aerated concrete building boards and aerated concrete flat building boards
DIN 4166 edition 12.1986 → replaced by edition 10.1997
Aerated concrete construction panels and aerated concrete flat construction panels
DIN 4166 edition 12.1973 → replaced by edition 12.1986
Aerated concrete building panels, unreinforced
DIN 4172 edition 9.2015 → current
Dimensions in building construction
DIN 4172 edition 7.1955 → replaced by edition 9.2015
Dimensions in building construction
DIN 4178 edition 4.2005 → current
Bell towers
DIN 4178 edition 8.1978 → replaced by edition 4.2005
Bell towers · Calculation and execution
DIN 4185 - Part 1 · Edition 5.2000 → current
Terms and abbreviations for sieve trays · Mesh sieve trays
DIN 4185 - Part 1 · Edition 7.1963 → replaced by Edition 5.2000
Sieve trays · Terms and abbreviations for fabric sieve trays
DIN 4185 - Part 2 · Edition 5.2000 → current
Terms and abbreviations for sieve trays · perforated plates
DIN 4185 - Part 2 - Supplement 1 · Edition 12.2003 → current
Terms and abbreviations for sieve trays · Perforated plates · Examples for use in other technical industrial areas
DIN 4185 - Part 2 · Edition 10.1981 → replaced by Edition 5.2000
Terms and abbreviations for sieve trays · perforated plates
DIN 4185 - Part 3 · Edition 5.2000 → current
Terms and abbreviations for sieve trays · Mesh-like sieve trays, slotted sieve trays and grates
DIN 4185 - Part 3 edition 11.1965 → replaced by edition 5.2000
Sieve trays · Terms and abbreviations for sieve trays, with the exception of fabric and perforated sieve trays
DIN 4186 - Part 1 edition 2.1968 → replaced by DIN ISO 4782 edition 10.1993
Sieve trays · Round metal wires · Dimensions
DIN 4186 - Part 2 edition 2.1968 → replaced by DIN ISO 4782 edition 10.1993
Sieve trays · Round metal wires · Technical delivery conditions, testing
DIN 4187 - part 1 edition 4.1974 → replaced by DIN ISO 3310 part 2 edition 2.1992
Sieve trays · Perforated plates for test sieves · Round perforations
DIN 4187 - Part 2 Edition 4.1974 → replaced by DIN ISO 3310 Part 2 Edition 2.1992
Sieve trays · perforated plates for test sieves · square perforations
DIN 4187 - part 3 edition 4.1974 → replaced by DIN ISO 3310 part 2 edition 2.1992
Sieve trays · Perforated plates for test sieves · Technical delivery conditions
DIN 4188 - part 1 edition 10.1977 → replaced by DIN ISO 3310 part 1 edition 2.1992
Sieve trays · Wire sieve trays for test sieves · Dimensions
DIN 4188 - Part 2 Edition 10.1977 → replaced by DIN ISO 3310 Part 1 Edition 2.1992
Sieve trays · Wire sieve trays for test sieves · Requirements and testing
DIN 4189 - Part 1 Edition 2.1968 → replaced by DIN ISO 4783 Part 2 Edition 3.1995
Sieve trays · Wire mesh made of steel, stainless steel and non-ferrous metal wire · Dimensions
DIN 4189 - Part 1 edition 11.1953 → replaced by edition 2.1968
Sieves · Wire mesh · Square mesh sizes, smooth binding
DIN 4189 - Part 3 · Edition 2.1957 → replaced by DIN ISO 9044 Edition 2.1993
Sieves · Wire mesh · Square mesh sizes, smooth binding · Technical delivery conditions and testing
DIN 4192 - part 1 edition 2.1968 → replaced by DIN ISO 4783 part 3 edition 3.1995
Sieve trays · Wire mesh and wire mesh made of spring steel wire · Dimensions
DIN 4195 Edition 10.1976 → current
Sieve trays · Sieve mesh made of silk or man-made fibers, dimensions
DIN 4196 edition 8.2015 → current
Sieve trays · Round monofilament yarns including chemical wires
DIN 4196 edition 7.1984 → replaced by edition 8.2015
Sieve trays · Round monofilament yarns including chemical wires · Designation, dimensions, requirements, testing
DIN 4196 edition 1.1971 → replaced by edition 7.1984
Sieve trays · Round chemical wires · Dimensions, technical delivery conditions, testing
DIN 4197 edition 9.1976 → current
Sieve trays · Sieve mesh made of round chemical monofilament yarn (wire), dimensions
DIN 4207 edition 2.1972 → withdrawn
Mixed binder
DIN 4208 · Edition 4.1997 → replaced by DIN EN 13454 Part 1 Edition 1.2005 and IN EN 13454 Part 2 Edition 3.2004
Anhydrite binder
DIN 4208 edition 3.1984 → replaced by edition 4.1997
Anhydrite binder
DIN 4208 edition 10.1962 → replaced by edition 3.1984
Anhydrite binder
DIN 4211 edition 3.1995 → replaced by DIN EN 413 part 1 edition 5.2004
Plaster and wall ties · Requirements, monitoring
DIN 4211 edition 8.1990 → replaced by edition 3.1995
Plaster and wall ties · Concept, requirements, tests, monitoring
DIN 4211 edition 4.1989 → replaced by edition 8.1990
Plaster and wall ties · Concept, requirements, tests, monitoring
DIN 4211 edition 12.1976 → replaced by edition 4.1989
Plaster and wall ties
DIN 4212 edition 1.1986 → withdrawn
Craneways made of reinforced concrete and prestressed concrete · Calculation and execution
The use of DIN EN 1991 Part 3 Edition 12.2010 is recommended
DIN 4213 edition 10.2015 → current
Use of prefabricated components made of pore-free lightweight concrete with statically chargeable or non-chargeable reinforcement in structures
DIN 4213 edition 7.2003 → replaced by edition 10.2015
Use of prefabricated reinforced components made of pore-free lightweight concrete in buildings
DIN 4219 - part 1 edition 12.1979 → replaced by DIN 1045 part 2 edition 7.2001 and DIN EN 206 part 1 edition 7.2001
Lightweight concrete and reinforced lightweight concrete with a closed structure · Requirements for the concrete, production and monitoring
DIN 4219 - Part 2 Edition 12.1979 → replaced by DIN 1045 Part 1 Edition 7.2001
Lightweight concrete and lightweight reinforced concrete with a closed structure · Dimensioning and execution
DIN 4220 · Edition 11.2008 → current
Soil-scientific site assessment marking, classification and derivation of soil properties (normative and nominal scaling)
DIN 4220 edition 7.1998 → replaced by edition 11.2008
Soil-scientific site assessment marking, classification and derivation of soil properties (normative and nominal scaling)
DIN 4220 - Part 1 · Edition 1.1987 → replaced by DIN 4220 Edition 7.1998
Soil-scientific site assessment · Recording and labeling as well as an overview of special investigation procedures
DIN 4223 - Part 100 · Edition 12.2014 → current
Use of prefabricated reinforced components made of steam-hardened aerated concrete · Properties and requirements for building materials and components
DIN 4223 - Part 101 · Edition 12.2014 → current
Application of prefabricated reinforced components made of steam-hardened aerated concrete · Design and dimensioning
DIN 4223 - Part 102 · Edition 12.2014 → current
Use of prefabricated reinforced components made of steam-hardened aerated concrete · Use in buildings
DIN 4223 - Part 103 · Edition 12.2014 → current
Use of prefabricated reinforced components made of steam-hardened aerated concrete · Safety concept
DIN 4223 - Part 1 Edition 12.2003 → replaced by DIN 4223 Part 100 Edition 12.2014 and DIN EN 12602 Edition 8.2008
Prefabricated reinforced components made of vapor-hardened aerated concrete · Production, properties, proof of conformity
DIN 4223 - Part 2 Edition 12.2003 → replaced by DIN 4223 Part 101 Edition 12.2014 and DIN EN 12602 Edition 8.2008
Prefabricated reinforced components made of steam-hardened aerated concrete · Components with statically chargeable reinforcement · Design and dimensioning
DIN 4223 - part 3 edition 12.2003 → replaced by DIN 4223 parts 101 and 102 editions 12.2014
Prefabricated reinforced components made of steam-hardened aerated concrete · Walls made of components with statically non-chargeable reinforcement · Design and dimensioning
DIN 4223 - Part 4 Edition 12.2003 → replaced by DIN 4223 Part 102 Edition 12.2014
Prefabricated reinforced components made of steam-hardened aerated concrete · Components with statically accountable reinforcement · Use in buildings
DIN 4223 - Part 5 Edition 12.2003 → replaced by DIN 4223 Part 103 Edition 12.2014
Prefabricated reinforced components made of steam-hardened aerated concrete · Safety concept
DIN 4223 edition 7.1958 → replaced by DIN 4223 parts 1, 2 and 5 edition 12.2003
Reinforced roof and ceiling panels made of vapor-hardened gas and foam concrete · Guidelines for dimensioning, manufacture, use and testing
DIN 4225 edition 7.1960 → replaced by DIN 1045 edition 1.1972
Regulations of the German Committee for Reinforced Concrete · Prefabricated components made of reinforced concrete · Guidelines for manufacture and use
DIN 4226 - Part 100 · Edition 2.2002 → current
Aggregates for concrete and mortar · Recycled aggregates
DIN 4226 - Part 1 Edition 7.2001 → withdrawn
Aggregates for concrete and mortar · Normal and heavy aggregates
The use of DIN EN 13055 edition 8.2002, DIN EN 13139 edition 8.2002 and DIN EN 12620 edition 4.2003 is recommended.
DIN 4226 - Part 1 · Edition 4.1983 → replaced by Edition 7.2001
Surcharge for concrete · Dense aggregate · Terms, description and requirements
DIN 4226 - Part 2 · Edition 2.2002 → withdrawn
Aggregates for concrete and mortarLight aggregates (lightweight aggregates)
DIN 4226 - Part 2 · Edition 4.1983 → replaced by Edition 2.2002
Surcharge for concrete · Surcharge with a porous structure (lightweight aggregate) · Terms, designation and requirements
DIN 4226 - part 3 edition 4.1983 → replaced by DIN 4226 part 1 edition 7.2001 and DIN 4226 part 2 edition 2.2002
Aggregate for concrete · Check aggregate with dense or porous structure
DIN 4226 - part 4 edition 4.1983 → replaced by DIN 4226 part 1 edition 7.2001 and DIN 4226 part 2 edition 2.2002
Surcharge for concrete monitoring (quality monitoring)
DIN 4227 - Part 1 - Amendment A1 · Edition 12.1995 → replaced by DIN 1045 Part 1 Edition 7.2001
Prestressed concrete · Components made of normal weight concrete with limited or full prestressing · Modification A1
DIN 4227 - Part 1 Edition 7.1988 → replaced by DIN 1045 Part 1 Edition 7.2001
Prestressed concrete · Components made from normal concrete with limited or full prestressing
DIN 4227 - Part 1 · Edition 12.1979 → replaced by Edition 7.1988 and DIN EN 1992 Parts 1-1 and 3 including national annexes Edition 1.2011
Prestressed concrete · Components made from normal concrete, with limited or full prestressing
DIN 4227 - part 4 edition 2.1986 → replaced by DIN 1045 part 1 edition 7.2001
Prestressed concrete · Components made from prestressed lightweight concrete
DIN 4227 - Part 5 Edition 12.1979 → replaced by DIN EN 445, DIN EN 446 and DIN EN 447 edition 7.1996
Prestressed concrete · Injection of cement mortar into ducts
DIN 4227 · Edition 10.1953 → replaced by DIN 4227 Part 1 Edition 12.1979
Prestressed concrete · Guidelines for dimensioning and execution
DIN 4228 edition 2.1989 → replaced by DIN EN 12843 edition 11.2004
Factory made concrete masts
DIN 4228 edition 10.1964 → replaced by edition 2.1989
Prestressed concrete masts · Guidelines for dimensioning and construction
DIN 4232 edition 9.1987 → replaced by DIN 4213 edition 7.2003, DIN EN 992 edition 9.1995, DIN EN 990 edition 1.2003 and DIN EN 1520 edition 7.2003
Walls made of lightweight concrete with a structure with pores and pores · Dimensioning and execution
DIN 4232 edition 12.1978 → replaced by edition 9.1987
Walls made of lightweight concrete with a structure with pores and pores; Dimensioning and execution
DIN 4233 edition 12.1953 → replaced by DIN 1045 edition 1.1972
Beam and rib ceilings made of prefabricated reinforced concrete beams with fillings · F-ceiling
DIN 4234 edition 1.1953 → replaced by DIN 4228 edition 2.1989
Reinforced concrete masts · Provisions for design and manufacture
DIN 4235 - Part 1 · Edition 12.1978 → current
Compacting concrete by shaking · Vibrating devices and vibrating mechanics
DIN 4235 - Part 2 Edition 12.1978 → withdrawn
Compacting concrete by vibrating · Compacting with internal vibrators
DIN 4235 - Part 3 Edition 12.1978 → withdrawn
Compaction of concrete by vibration · Compaction in the manufacture of precast parts with external vibrators
DIN 4235 - Part 4 Edition 12.1978 → withdrawn
Compacting concrete by vibrating · Compacting in-situ concrete with formwork vibrators
DIN 4235 - Part 5 Edition 12.1978 → withdrawn
Compacting concrete by vibrating · Compacting with surface vibrators
DIN 4242 edition 1.1979 → current
Glass block walls · Execution and dimensioning
DIN 4242 edition 1.1967 → replaced by edition 1.1979
Glass block walls · Execution and dimensioning
DIN 4243 Edition 3.1978 → replaced by DIN EN 1051 Part 1 Edition 4.2003
Concrete glasses · Requirements, testing
DIN 4261 - Part 1 · Edition 10.2010 → current
Small sewage treatment plants · Plants for waste water pre-treatment
DIN 4261 - Part 1 · Edition 12.2002 → replaced by Edition 10.2010
Small wastewater treatment plants · Plants for wastewater treatment
DIN 4261 - Part 1 edition 2.1991 → replaced by edition 12.2002 and DIN EN 12566 part 1 edition 9.2000
Small sewage treatment plants · Plants without wastewater ventilation · Application, dimensioning and execution
DIN 4261 - Part 1 edition 10.1983 → replaced by edition 2.1991
Small sewage treatment plants · Plants without wastewater ventilation · Application, dimensioning and execution
DIN 4261 - part 1 edition 10.1970 → replaced by edition 10.1983 and DIN 4261 part 3 edition 10.1983
Small wastewater treatment plants · Application, dimensioning, design and operation · Plants without wastewater ventilation
DIN 4261 - part 2 edition 6.1984 → replaced by DIN EN 12566 part 1 edition 5.2004 and DIN EN 12566 part 3 edition 10.2005
Small wastewater treatment plants · Plants with waste water ventilation · Application, dimensioning, execution and testing
DIN 4261 - part 3 edition 9.1990 → replaced by DIN 4261 part 1 edition 12.2002 and DIN EN 12566 part 1 edition 9.2000
Small wastewater treatment plants · Plants without wastewater ventilation · Operation and maintenance
DIN 4261 - Part 3 · Edition 10.1983 → replaced by Edition 9.1990
Small wastewater treatment plants · Plants without wastewater ventilation · Operation and maintenance
DIN 4261 - part 4 edition 6.1984 → replaced by DIN EN 12566 part 3 edition 10.2005
Small wastewater treatment plants · Plants with waste water ventilation · Operation and maintenance
DIN 4261 - Part 5 · Edition 10.2012 → current
Small sewage treatment plants · Infiltration of biologically aerobically treated wastewater
Correction of the 11.2011 edition
DIN 4261 - Part 5 · Edition 11.2011 → replaced by Edition 10.2012
Small sewage treatment plants · Infiltration of biologically aerobically treated wastewater
DIN 4261 - part 101 edition 2.1998 → replaced by DIN EN 12566 part 3 edition 10.2005
Small sewage treatment plants · Plants without waste water ventilation · Principles for in-house production control and external monitoring
DIN 4261 - part 101 edition 11.1997 → replaced by edition 2.1998
Small sewage treatment plants · Plants without waste water ventilation · Principles for in-house production control and external monitoring
DIN 4261 edition 10.1954 → replaced by DIN 4261 part 1 edition 10.1970
Small wastewater treatment plants · Guidelines for application, dimensioning, execution and operation
DIN 4262 - Part 1 · Edition 10.2009 → current
Pipes and fittings for underground drainage in traffic routes and civil engineering Pipes, fittings and their connections made of PVC-U, PP and PE
DIN 4262 - Part 1 · Edition 1.2001 → replaced by Edition 10.2009
Piping systems for the underground drainage of civil engineering · Plastic pipes
DIN 4262 - part 1 edition 12.1998 → replaced by edition 1.2001
Piping systems for the underground drainage of civil engineering · Plastic pipes
DIN 4262 - Part 1 · Edition 3.1989 → replaced by Edition 12.1998
Drainage and multi-purpose pipes made of PVC-U and PE-HD for traffic routes and civil engineering · Requirements and tests
DIN 4262 - Part 3 · Edition 10.2010 → current
Pipes and fittings for underground drainage in traffic routes and civil engineering · Pipes and fittings made of concrete and their connections
DIN 4262 - Part 3 · Edition 2.1991 → replaced by Edition 10.2010
Seepage and multi-purpose pipes for traffic routes and civil engineering made of concrete · Requirements and tests
DIN 4263 · Edition 6.2011 → current
Key figures of sewers and pipes for the hydraulic calculation in the water industry
DIN 4263 · Edition 4.1991 → replaced by Edition 6.2011
Shapes, dimensions and geometrical values of channels and pipes in water
DIN 4263 · Edition 7.1977 → replaced by Edition 4.1991
Channels and pipes in hydraulic engineering · Shapes, dimensions and geometric values of closed cross-sections
DIN 4266 - Part 1 · Edition 11.2011 → current
Drainage pipes for landfills · Drainage pipes made of PE and PP
DIN 4266 - Part 1 · Edition 1.1992 → replaced by Edition 11.2011
Drainage pipes for landfills made of PVC-U, PE-HD and PP · Requirements, tests and monitoring
DIN 4266 - Part 3 · Edition 1.2015 → current
Drainage pipes for landfills · Drainage pipes and fittings made of concrete and their connections
DIN 4266 - part 3 edition 12.1992 → replaced by edition 1.2015
Concrete drainpipes for landfills · Requirements, tests and monitoring
DIN 4271 - Part 1 · Edition 10.2012 → current
Manhole covers with ventilation openings, class B 125 · Composition
DIN 4271 - Part 1 · Edition 8.1998 → replaced by Edition 10.2012
Manhole covers, class B 125 · Compilation
DIN 4271 - Part 1 · Edition 4.1990 → replaced by Edition 8.1998
Manhole covers, class B 125 · Compilation
DIN 4271 - Part 1 · Edition 7.1980 → replaced by Edition 4.1990
Manhole covers for manholes, class B · Composition
DIN 4271 - Part 2 · Edition 10.2012 → current
Manhole covers with ventilation openings, class B 125 · Individual parts
DIN 4271 - Part 2 · Edition 8.1998 → replaced by Edition 10.2012
Class B 125 manhole covers · Frame
DIN 4271 - Part 2 · Edition 2.1989 → replaced by Edition 8.1998
Class B 125 manhole covers · Frame
DIN 4271 - Part 2 · Edition 7.1980 → replaced by Edition 2.1989
Manhole covers for manholes, class B frame
DIN 4271 - Part 3 Edition 8.1998 → replaced by DIN 4271 Part 2 Edition 10.2012
Manhole covers, class B 125 · Lid
DIN 4271 - Part 3 · Edition 4.1990 → replaced by Edition 8.1998
Manhole covers, class B 125 · Lid
DIN 4271 - Part 3 · Edition 7.1980 → replaced by Edition 4.1990
Manhole covers for manholes, class B · Lid
DIN 4279 - Part 1 edition 11.1975 → replaced by DIN EN 805 edition 3.2000
Internal pressure test of pressure pipelines for water · General information
DIN 4279 - Part 2 edition 11.1975 → replaced by DIN EN 805 edition 3.2000
Internal pressure test of pressure pipelines for water · Pressure pipes made of ductile cast iron
DIN 4279 - Part 3 · Edition 6.1990 → replaced by DIN EN 805 Edition 3.2000
Internal pressure testing of pressure pipelines for water · Pressure pipes made of ductile cast iron and steel pipes with a cement mortar lining
DIN 4279 - Part 3 · Edition 11.1975 → replaced by Edition 6.1990
Internal pressure testing of pressure pipelines for water · Pressure pipes made of ductile cast iron and steel pipes with a cement mortar lining
DIN 4279 - part 4 edition 11.1975 → replaced by DIN EN 805 edition 3.2000
Internal pressure test of pressure pipelines for water · Steel pipes with and without bitumen lining
DIN 4279 - Part 5 Edition 11.1975 → replaced by DIN EN 805 Edition 3.2000
Internal pressure testing of pressure pipelines for water · Reinforced concrete pressure pipes and prestressed concrete pressure pipes
DIN 4279 - Part 6 Edition 11.1975 → replaced by DIN EN 805 Edition 3.2000
Internal pressure testing of pressure pipelines for water · Asbestos-cement pressure pipes
DIN 4279 - Part 7 Edition 11.1975 → withdrawn
Internal pressure test of pressure pipelines for water Pressure pipes made of hard PVC (hard polyvinyl chloride)
The standard has been replaced by the pre-standard DIN V 4279 part 7 edition 12.1994
DIN 4279 - Part 8 Edition 11.1975 → withdrawn
Internal pressure test of pressure pipelines for water Pressure pipes made of hard PE (hard polyethylene) and soft PE (soft polyethylene)
The standard has been replaced by the pre-standard DIN V 4279 part 7 edition 12.1994
DIN 4279 - Part 9 Edition 11.1975 → replaced by DIN EN 805 Edition 3.2000
Internal pressure test of pressure pipelines for water · Samples for test reports
DIN 4279 - Part 10 Edition 11.1977 → withdrawn
Internal pressure test of pressure pipelines for water · Overview
DIN 4281 edition 8.1998 → current
Concrete for factory-made drainage objects · Production, requirements, tests and monitoring
DIN 4281 edition 3.1985 → replaced by edition 8.1998
Concrete for drainage objects · Production, requirements and tests
DIN 4281 edition 6.1983 → replaced by edition 3.1985
Concrete for drainage objects · Production, requirements and tests
DIN 4281 edition 3.1966 → replaced by edition 6.1983
Concrete for drainage objects · Requirement, production and testing
DIN 4284 - Part 1 Edition 11.1973 → withdrawn
Floor drain with internal cleaning opening · Composition
DIN 4284 - Part 2 Edition 11.1973 → withdrawn
Floor drain with internal cleaning opening · Individual parts
DIN 4299 edition 12.1967 → withdrawn
Attachments for road drainage funnel
DIN 4301 · Edition 6.2009 → current
Metallurgical slag and metallurgical slag in construction
DIN 4301 · Edition 4.1981 → replaced by Edition 6.2009
Metallurgical slag and metallurgical slag in construction
DIN 4301 edition 11.1980 → replaced by edition 4.1981
Metallurgical slag and metallurgical slag in construction
DIN 4304 edition 12.1989 → current
Steam turbines · Terms, classification
DIN 4304 · Edition 7.1964 → replaced by Edition 12.1989
Steam Turbines · Terms
DIN 4305 - Part 1 · Edition 6.1968 → current
Steam turbines · Names of the assemblies and components of the turbine
DIN 4305 - Part 2 · Edition 6.1968 → current
Steam turbines · Names of the assemblies and components of the condensation plant
DIN 4312 edition 12.1983 → withdrawn
Industrial turbines · Steam and gas expansion turbines · Basics for the construction of industrial turbines
DIN 4319 - Part 1 · Edition 6.1994 → withdrawn
Steam and gas turbines · Thermodynamic and fluidic terms for steam and gas turbine sets · Basics
DIN 4319 - Part 2 · Edition 6.1994 → withdrawn
Steam and gas turbines · Thermodynamic and fluidic terms for steam and gas turbine sets · Functional terms and functional machine terms
DIN 4320 · Edition 10.1971 → withdrawn
Water turbines · Names according to the mode of operation and construction
DIN 4321 · Edition 5.1987 → withdrawn
Water turbines · Technical specifications for control equipment
DIN 4325 · Edition 10.1971 → current
Acceptance tests on storage pumps
DIN 4340 edition 8.1976 → withdrawn
Gas turbines · Terms, designations
DIN 4341 - Part 1 Edition 8.1979 → withdrawn
Gas turbines · Acceptance rules for gas turbines, basics
DIN 4341 - Part 2 · Edition 3.1986 → withdrawn
Gas turbines · Acceptance rules for gas turbines · Evaluation examples
DIN 4342 edition 12.1979 → current
Gas turbines · Standard reference conditions, standard outputs, information on operating values
DIN 4361 edition 11.1979 → replaced by DIN EN 1012 part 1 edition 7.1996
Safety-compliant design of technical products · Contact protection devices for compressors, safety requirements
DIN 4420 - Part 1 · Edition 3.2004 → current
Working and protective scaffolding · Protective scaffolding · Performance requirements, design, construction and dimensioning
DIN 4420 - part 1 edition 12.1990 → replaced by edition 3.2004 and DIN EN 12811 part 1 edition 3.2004
Working and protective scaffolding · General regulations · Safety requirements, tests
DIN 4420 - part 1 edition 3.1980 → replaced by edition 12.1990 and DIN 4420 part 3 edition 12.1990
Working and protective scaffolding (except ladder scaffolding) · Calculation and structural development
DIN 4420 - Part 2 · Edition 12.1990 → withdrawn
Working and protective scaffolding · Ladder scaffolding · Safety requirements
DIN 4420 - Part 2 · Edition 3.1980 → replaced by Edition 12.1990
Working and protective scaffolding · Ladder scaffolding
DIN 4420 - Part 3 · Edition 1.2006 → current
Working and protective scaffolding · Selected types of scaffolding and their standard designs
DIN 4420 - Part 3 Edition 12.1990 → replaced by Edition 1.2006
Work and protective scaffolding · Scaffolding types excluding ladder and system scaffolding · Safety requirements and standard designs
DIN 4420 - part 4 edition 12.1988 → replaced by DIN EN 12810 parts 1 and 2 edition 3.2004
Work and protective scaffolding made from prefabricated components (system scaffolding) · Materials, scaffolding components, dimensions, load assumptions and safety requirements · German version HD 1000: 1988
DIN 4421 edition 8.1982 → replaced by DIN EN 12812 edition 9.2004
Shoring · Calculation, construction and execution
DIN 4422 - Part 1 edition 8.1992 → replaced by DIN EN 1004 edition 3.2005
Mobile working platforms (mobile scaffolding) made of prefabricated components · Materials, scaffolding components, dimensions, load assumptions and safety requirements; German version HD 1004: 1992
DIN 4422 edition 3.1977 → replaced by DIN 4422 part 1 edition 8.1992
Mobile working platforms (mobile scaffolding) · Calculation, construction, execution, instructions for use
DIN 4424 edition 6.1987 → replaced by DIN EN 1065 edition 12.1998
Steel props with pull-out device · Safety requirements and testing
DIN 4425 · Edition 4.2017 → current
Light scaffolding spindles · Constructive requirements, proof of structural safety and manufacture
DIN 4425 edition 11.1990 → replaced by edition 4.2017
Light scaffolding spindles · Constructive requirements, proof of structural safety and monitoring
DIN 4426 edition 1.2017 → current
Facilities for the maintenance of structural systems · Safety requirements for workplaces and traffic routes · Planning and execution
DIN 4426 edition 12.2013 → replaced by edition 1.2017
Facilities for the maintenance of structural systems · Safety requirements for workplaces and traffic routes · Planning and execution
DIN 4426 edition 9.2001 → replaced by edition 12.2013
Facilities for the maintenance of structural systems · Safety requirements for workplaces and traffic routes · Planning and execution
DIN 4426 edition 4.1990 → replaced by edition 9.2001
Safety devices for the maintenance of structural systems · Fall protection
DIN 4427 edition 9.1990 → replaced by DIN EN 39 edition 8.2001
Steel tube for shoring and working scaffolding · Requirements, tests · German version HD 1039: 1990
DIN 4444 Edition 6.1960 → withdrawn
Steel window profiles, rolled, B 48 series · Dimensions and static values
DIN 4462 edition 3.1970 → replaced by DIN EN 695 edition 10.1997
Fire clay sink units
DIN 4463 edition 3.1970 → replaced by DIN EN 695 edition 10.1997
Enamelled cast iron sink units
DIN 4464 edition 3.1970 → replaced by DIN EN 695 edition 10.1997
Enamelled steel sink units
DIN 4465 - Part 1 edition 12.1975 → replaced by DIN EN 695 edition 10.1997
Stainless steel sink units · Lay-on sinks
DIN 4465 - Part 2 edition 12.1975 → replaced by DIN EN 695 edition 10.1997
Stainless steel sink units · Built-in sinks
DIN 4471 edition 10.1960 → withdrawn
Gray cast iron bathtubs · Overview
DIN 4473 Edition 10.1960 → withdrawn
Freestanding bathtub body 1600 for bathtubs made of gray cast iron
DIN 4474 edition 10.1960 → withdrawn
Freestanding bathtub body 1700 for bathtubs made of gray cast iron
DIN 4486 edition 4.1962 → withdrawn
Shower trays, ceramics
DIN 4488 edition 9.1962 → withdrawn
Bathtubs · Shower trays, cast iron
See also
swell
- Beuth Verlag - Product search
- Beuth Verlag website - search for historical documents (registration required)