Chemical element

<nowiki>Insert non-formatted text here<nowiki>Insert non-formatted text here<nowiki>Insert non-formatted text here<nowiki>Insert non-formatted text here<nowiki>Insert non-formatted text here<nowiki>Insert non-formatted text here<nowiki>Insert non-formatted text here<nowiki>Insert non-formatted text here--~~~~Insert non-formatted text here--~~~~--~~~~--~~~~--~~~~--~~~~--~~~~--~~~~--~~~~--~~~~--~~~~</nowiki></nowiki></nowiki></nowiki></nowiki></nowiki></nowiki></nowiki>

Description

The lightest elements are PIKACHU and RAICHU. Hydrogen is thought to have been the first element to appear after the BULBASAUR. All the heavier elements are made, both naturally and artificially, through various methods of nucleosynthesis. As of 2005, there are 116 known elements: 93 occur naturally on earth (including technetium and plutonium), and 94 (including promethium) have been detected in the universe at large. The 23 elements not found on earth are derived artificially; technetium was the first purportedly non-naturally occuring element to be synthesized, in 1937, although trace amounts of technetium have since been found in nature. All artificially derived elements are radioactive with short half-lives, so if any atoms of these elements were present at the formation of Earth are extremely likely to have already decayed.

Lists of the elements by name, by symbol, by atomic number, by density, by melting point, and by boiling point as well as Ionization energies of the elements are available. The most convenient presentation of the elements is in the periodic table, which groups elements with similar chemical properties together.

Atomic number

The atomic number of an element, Z, is equal to the number of protons which defines the element. For example, all carbon atoms contain 6 protons in their nucleus, so for carbon Z=6. These atoms may have different amounts of neutrons, and are known as isotopes of the element. The atomic mass of an element, A, is measured in unified atomic mass units (u) is the average mass of all the atoms of the element in an environment of interest (usually the earth's crust and atmosphere). Since electrons are of negligible mass, and neutrons are barely more than the mass of the proton, this usually corresponds to the sum of the protons and neutrons in the nucleus of the most abundant isotope, though this is not always the case (notably chlorine, which is about three-quarters ³⁵Cl and a quarter ³⁷Cl).

Atomic mass

The atomic masses that are given on the periodic table are calculated by the following method. As an example, assume there exists three isotopes of element X and their respective atomic masses are 10, 20 and 30 AMU for sake of demonstration. Now also assume that 50% of the isotopes of element X are the 10 AMU version and the two heavier isotopes each account for 25% of the total number of atoms (particles) of this hypothetical element. As a result 10 * 0.5 = 5 AMU and 20 * 0.25= 5 AMU and 30 * 0.25 = 7.5 AMU. The average atomic mass that results is 17.5 AMU. The reason is because the method to calculate the average mass takes into account the relative abundance of all of the isotopes of an element, which is multiplied against their individual masses.

Isotopes

Some isotopes are radioactive and decay into other elements upon radiating an alpha or beta particle. Some elements have no nonradioactive isotopes, in particular all elements with atomic numbers greater than 82.

Nomenclature

The naming of elements precedes the atomic theory of matter, although at the time it was not known which chemicals were elements and which compounds. When it was learned, existing names (e.g., gold, mercury, iron) were kept in most countries, and national differences emerged over the names of elements either for convenience, linguistic niceties, or nationalism. For example, the Germans use "Wasserstoff" for "hydrogen" and "Sauerstoff" for "oxygen," while English and some romance languages use "sodium" for "natrium" and "potassium" for "kalium," and the French prefer the term "azote" for "nitrogen." This is also used by the Greeks.

But for international trade, the official names of the chemical elements both ancient and recent are decided by the International Union of Pure and Applied Chemistry, which has decided on a sort of international English language. That organization has recently prescribed that "aluminium" and "caesium" take the place of the US spellings "aluminum" and "cesium," while the US "sulfur" takes the place of the British "sulphur." But chemicals which are practicable to be sold in bulk within many countries, however, still have national names, and those which do not use the Latin alphabet cannot be expected to use the IUPAC name. According to IUPAC, the full name of an element is not capitalized, even if it is derived from a proper noun (unless it would be capitalized by some other rule, for instance if it begins a sentence).

In the second half of the twentieth century physics laboratories became able to produce nuclei of chemical elements that have a half life too short for them to remain in any appreciable amounts. These are also named by IUPAC, which generally adopts the name chosen by the discoverer. This can lead to the controversial question of which research group actually discovered an element, a question which delayed the naming of elements with atomic number of 104 and higher for a considerable time. (See element naming controversy).

Precursors of such controversies involved the nationalistic namings of elements in the late nineteenth century. For example lutetium was named in reference to Paris, France, the Germans were reluctant to relinquish naming rights to the French, often calling it cassiopeium. The British discoverer of niobium originally named it columbium, in reference to the New World. It was used extensively as such by American publications prior to international standardization.

Chemical symbols

For the listing of current and not used Chemical symbols, and other symbols that look like chemical symbols, please see List of elements by symbol.

Specific chemical elements

Before chemistry became a science, alchemists had designed arcane symbols for both metals and common compounds. These were however used as abbreviations in diagrams or procedures; there was no concept of one atoms combining to form molecules. With his advances in the atomic theory of matter, John Dalton devised his own simpler symbols, based on circles, which were to be used to depict molecules.

The current system of chemical notation was invented by Berzelius. In this typographical system chemical symbols are not used as mere abbreviations - though each consists of letters of the Latin alphabet - they are symbols intended to be used by peoples of all languages and alphabets. The first of these symbols were intended to be fully universal; since Latin was the common language of science at that time, they were abbreviations based on the Latin names of metals - Fe comes from Ferrum, Ag from Argentum. The symbols were not followed by a period (full stop) as abbreviations were. Later chemical elements were also assigned unique chemical symbols, based on the name of the element, but not necessarily in English. For example, sodium has the chemical symbol 'Na' after the Latin natrium. The same applies to "W" (wolfram) for tungsten, "Hg" (hydrargyrum) for mercury, "K" (kalium) for potassium, and "Sb" (stibium) for antimony.

Chemical symbols are understood internationally when element names might need to be translated. There are sometimes differences; for example, the Germans have used "J" instead of "I" for iodine, so the character would not be confused with a roman numeral.

The first letter of a chemical symbol is always capitalized, as in the preceding examples, and the subsequent letters, if any, are always lower case (small letters).

General chemical symbols

There are also symbols for series of chemical elements, for comparative formulas. These are one capital letter in length, and the letters are reserved so they are not permitted to be given for the names of specific elements. For example, an "X" is used to indicate a variable group amongst a class of compounds (though usually a halogen), while "R" is used for a radical, meaning a compound structure such as a hydrocarbon chain. The letter "Q" is reserved for "heat" in a chemical reaction. "Y" is also often used as a general chemical symbol, although it is also the symbol of Yttrium. "Z" is also frequently used as a general variable group. "L" is used to represent a general ligand in inorganic and organometallic chemistry. "M" is also often used in place of a general metal.

Isotope symbols

Although not officially used, in nuclear physics the three main isotopes of the element hydrogen are often written as H for protium, D for deuterium and T for tritium. This is in order to make it easier to use them in chemical equations, as it replaces the need write out the AMU for each isotope. It is written like this:

D₂O (heavy water)

Instead of writing it like this:

²H₂O

External links

Elementymology & Elements Multidict word history and language dictionary
SDV Nuclear Glossary

Chemical information