Jump to content

Flying Yankee

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by DavidWBrooks (talk | contribs) at 15:33, 4 August 2017 (update status of the trainset, add reference, remove hatnote). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Flying Yankee
Type and origin
Power typeDiesel
BuilderBudd Company and Electro-Motive Corporation
ModelBM-MEC 6000
Build date1935
Total produced1
Specifications
Configuration:
 • AARB-2
Gauge4 ft 8+12 in (1,435 mm) standard gauge
BogiesJacobs Bogie
Prime moverWinton 201-A
Engine typeDiesel
Cylinders8
Career
OperatorsBoston & Maine Railroad
LocaleNorth America
DeliveredFebruary 1935
Last runMay 7, 1957
RestoredOn going project
Current ownerState of New Hampshire
DispositionUnder restoration
Flying Yankee
Overview
Service typeInter-city rail
StatusDiscontinued
First service1935
Last service1957
Former operator(s)Boston and Maine Railroad
Maine Central Railroad
Route
TerminiNorth Station
Bangor Union Station
Distance travelled254 miles (409 km)
Average journey time5 hours
Service frequencyDaily, except Sunday
On-board services
Catering facilitiesThe Armstrong Company
Technical
Timetable number(s)15

The Flying Yankee was a diesel-powered streamliner built in 1935 for the Maine Central Railroad and the Boston and Maine Railroad by Budd Company and with mechanical and electrical equipment from Electro-Motive Corporation. It was also the name of a passenger train, the third streamliner train in North America after the Union Pacific Railroad's M-10000 and the Chicago, Burlington and Quincy Railroad's Pioneer Zephyr; the Flying Yankee was, in fact, a virtual clone of the latter, except that it dispensed with the baggage/mail space to seat 142 in three articulated cars.[1]

History

Rollout of the Flying Yankee at the Budd Company in 1935.
This "drumhead" logo adorned the end of the observation car on the Flying Yankee.

The lightweight train was constructed with welded stainless steel using Budd's patented process. The engine was an 8-cylinder Winton 201-A diesel, driving a generator; the lead truck was equipped with traction motors. It was fitted with air conditioning in all cars. No dining car was provided; instead, meals were prepared in a galley and served to passengers in trays that clipped to the back of the seat in front.[1]

The train was delivered in February 1935, and toured the BM-MEC railroad system before entering service on April 1.[1] The daily route served began in Portland, Maine, then to Boston, Massachusetts, followed by a return to Portland and continuing to Bangor, Maine, returning through Portland to Boston and finally returning to Portland late in the day, a distance of 750 miles per day. This schedule was kept six days a week; the trainset spent Sundays undergoing maintenance. The train proved extremely successful, attracting new ridership and earning a profit for its owners.

Later on, as newer equipment replaced it on one route, it would be switched to other routes, bearing the names The Cheshire, The Minuteman, The Mountaineer, and The Business Man.[1]

As railroad passenger ridership declined in the 1950s the Yankee was also getting old, and thus the trainset, as The Minuteman, was retired, running its last on May 7, 1957.[1]

Most of the train's route is currently operated by Amtrak's Downeaster, which runs as far north as Brunswick, Maine.

Current locatio

The railroad donated the trainset to the Edaville Railroad tourist/museum operation in Carver, Massachusetts in 1957. The train remained on static display there for about 35 years until it was moved in 1993 to Glen, New Hampshire after being purchased by Bob Morrell, then owner of Story Land.

In 1997, the train was moved to the Claremont Concord Railroad's shops in Claremont, New Hampshire for a restoration after it was purchased by the state of New Hampshire. By 2004, the major structural restoration had been completed, and detailed restoration of components is ongoing with the goal of restoring the train completely to running condition. The train was moved on August 10, 2005, to the Hobo Railroad in Lincoln, New Hampshire.

Plans to move it to Concord, New Hampshire, site of a former Boston & Maine railyard, fell through in 2017. The state hopes to open the train to public viewing in Lincoln.[2]

Models

HO scale

  • Orion Models/NJ Custom Brass. 1985. Imported scale brass model.
  • Challenger Imports. Imported scale brass model.

O scale

  • Lionel. "pre-war", produced from 1935-1941. Not a scale model. "3 rail" AC power.
  • Sunset/3rd Rail. Imported brass model. Available in both "3 rail" AC and "2 rail" DC power. Scale model, not "selectively compressed"
  • Lionel. 2008. Reproduction of pre-war model.

Further reading

  • Colquhoun, Lorna, New Hampshire Union Leader (August 11, 2005), Flying Yankee rolls into Hobo Railroad. Retrieved August 11, 2005.
  • Lindblade, Carl E. and The Flying Yankee Restoration Group. The Story of the Flying Yankee. Retrieved from http://www.flyingyankee.com/history.html on December 19, 2004
  • Pinkepank, Jerry A. (1973). The Second Diesel Spotter's Guide. Kalmbach Publishing Co., Milwaukee, WI. ISBN 0-89024-026-4.

References

  1. ^ a b c d e "Two Veterans Retire". Boston and Maine Railroad Magazine. May–June 1957. Retrieved 18 May 2012.
  2. ^ Concord Monitor: "Flying Yankee train won’t be returning to Concord" June 3, 2017

External links