List of DIN standards / DIN 50000–99999

This list is a sub-list of the list of DIN standards .

The following applies to the following list

• The list does not claim to be complete
• The list does not claim to be up-to-date
• The struck through standards are historical standard editions that are no longer valid
• The standard titles are listed in the spelling valid at the time the relevant standard was published

DIN 50000-59999

• DIN 50017 condensation test climate , replaced by DIN EN ISO 6270-2
• DIN 50018 testing in an alternating condensation climate with an atmosphere containing sulfur dioxide
• DIN 50021 spray tests with various sodium chloride solutions , replaced by DIN EN ISO 9227
• DIN 50022 Metallic and other inorganic coatings - layer potential measurement of galvanic multiple nickel layer systems (STEP test)
• DIN 50049 types of test certificates , August 1995 replaced by DIN EN 10204
• DIN 50050 testing of materials; Burning behavior of materials
  • Part 1 Small burning box
  • Part 2 Large burning box
• DIN 50051 Testing of materials; Burning behavior of materials, burners
• DIN 50055 light measuring section for smoke development tests
• DIN 50100 material testing; Endurance test, terms, symbols, implementation, evaluation
• DIN 50103 testing of metallic materials - Rockwell hardness test
  • Part 3 Modified Rockwell processes Bm and Fm for thin sheet steel
• DIN 50104 internal pressure test on hollow bodies; Leak test up to a certain internal pressure; General specifications
• DIN 50106 testing of metallic materials; Print attempt
• DIN 50113 testing of metallic materials; Rotary bending test
• DIN 50115 testing of metallic materials; Notched bar impact test; Special sample shape and evaluation method, replaced by DIN EN ISO 148-1 and DIN EN ISO 148-1 Supplement 1
• DIN 50116 testing of zinc and zinc alloys; Impact bending test
• DIN 50125 testing of metallic materials - tensile specimens
• DIN 50131 testing of metallic materials; Determination of shrinkage
• DIN 50134 Testing of metallic materials - pressure test on metallic cellular materials
• DIN 50142 testing of metallic materials; Flat bending test
• DIN 50145 tensile test for metallic materials , replaced by DIN EN ISO 6892-1 and DIN EN ISO 6892-2
• DIN 50150 testing of steel and cast steel; Conversion table for Vickers hardness , Brinell hardness , Rockwell hardness and tensile strength , replaced by DIN EN ISO 18265
• DIN 50154 tensile test without fine elongation measurement on foils and strips made of aluminum and wrought aluminum alloys with a thickness of up to 0.179 mm
• DIN 50157 Metallic materials - Hardness testing with portable hardness testers that work with mechanical penetration depth measurement
  • Part 1 test method
  • Part 2 testing and calibration of the hardness testers
• DIN 50158 Metallic materials - Hardness testing with portable hardness testers that work with electrical penetration depth measurement
  • Part 1 test method
  • Part 2 testing and calibration of the hardness testers
• DIN 50159 Metallic materials - hardness test according to the UCI method
  • Part 1 test method
  • Part 2 testing and calibration of the hardness testers
• DIN 50162 testing of clad steels; Determination of the adhesive shear strength between the support material and the base material in a shear test
• DIN 50190 laser technology - hardness depth of heat-treated parts
  • Part 3 Determination of the nitriding hardness depth
  • Part 4 Determination of the enamel hardness depth and the melt depth
• DIN 50280 running test on radial plain bearings; General
• DIN 50282 plain bearings; The tribological behavior of metallic sliding materials, characteristic terms
• DIN 50315 testing of metallic blasting media by centrifugal blasting - wear test, effectiveness test
• DIN 50320 Wear: Terms, system analysis of wear processes, structure of the wear area , November 1997 withdrawn without replacement
• DIN 50450 Testing of materials for semiconductor technology; Determination of impurities in carrier and doping gases
  • Part 1 Determination of water contamination in hydrogen, oxygen, nitrogen, argon and helium using a diphosphorus pentoxide cell
  • Part 2 Determination of the oxygen contamination in nitrogen, argon, helium, neon and hydrogen using a galvanic measuring cell
  • Part 3 Determination of methane impurities in hydrogen, oxygen, nitrogen, argon and helium with a flame ionization detector (FID)
  • Part 4 Determination of C ₁ -C ₃ hydrocarbons in nitrogen with gas chromatography
  • Part 9 Determination of oxygen, nitrogen, carbon monoxide, carbon dioxide, hydrogen and C ₁ -C ₃ hydrocarbons in hydrogen chloride with
• DIN 50451 Testing of materials for semiconductor technology - Determination of traces of elements in liquids
  • Part 1 silver (Ag), gold (Au), calcium (Ca), copper (Cu), iron (Fe), potassium (K) and sodium (Na) in nitric acid using AAS
  • Part 2 calcium (Ca), cobalt (Co), chromium (Cr), copper (Cu), iron (Fe), nickel (Ni) and zinc (Zn) in hydrofluoric acid using plasma-excited emission spectrometry
  • Part 3 aluminum (Al), cobalt (Co), copper (Cu), sodium (Na), nickel (Ni) and zinc (Zn) in nitric acid using ICP-MS
  • Part 4 Determination of 34 elements in ultrapure water by mass spectrometry with inductively coupled plasma (ICP-MS)
  • Part 5 Guideline for the selection of materials and testing of their suitability for devices for sampling and sample preparation for the determination of traces of elements in the range of micrograms per kilogram and nanograms per kilogram
  • Part 6 Determination of 36 elements in high-purity ammonium fluoride solution (NH₄F) and caustic mixtures from high-purity ammonium fluoride solution with hydrofluoric acid
• DIN 50452 Testing of materials for semiconductor technology - method for particle analysis in liquids
  • Part 1 microscopic particle determination
  • Part 2 particle determination with optical flow particle counters
  • Part 3 calibration of optical flow particle counters
• DIN 50453 Testing of materials for semiconductor technology; Determination of the etching rates of etching mixtures
  • Part 1 silicon single crystals; Gravimetric method
  • Part 2 silicon dioxide layers; Optical process
• DIN 50455 Testing of materials for semiconductor technology - method for characterizing photoresists
  • Part 1 Determination of the layer thickness with optical measuring methods
  • Part 2 Determination of the light sensitivity of positive photoresists
• DIN 50460 Determination of the magnetic properties of soft magnetic materials; General, terms, basics of the test procedures
• DIN 50472 testing of permanent magnets; Determination of the magnetic flux values ​​in the working area
• DIN 50504 Chemical analysis of copper and copper alloys; Photometric determination of iron in copper and copper alloys with a maximum of 0.4% iron
• DIN 50506 Chemical analysis of copper and copper alloys; Photometric determination of nickel in copper alloys with a maximum of 2.5% nickel
• DIN 50507 Chemical analysis of copper and copper alloys; Determination of the lead content, procedure by extraction titration
• DIN 50508 Chemical analysis of copper and copper alloys; Determination of tin as an alloying element, dimensional analysis method
• DIN 50510 Chemical analysis of copper and copper alloys; Determination of the arsenic content in copper and copper alloys, photometric method
• DIN 50550 zinc and zinc alloys; Determination of indium and thallium by atomic absorption spectrometry
• DIN 50600 testing of metallic materials; Metallographic microstructural images, image scales and formats
• DIN 50905 Corrosion of metals - Corrosion tests
  • Part 1 principles
  • Part 2 Corrosion sizes with uniform surface corrosion
  • Part 3 Corrosion sizes with uneven and local corrosion without mechanical stress
  • Part 4 Conducting chemical corrosion tests without mechanical stress in liquids in the laboratory
• DIN 50908 Testing of the resistance of aluminum wrought materials to stress corrosion cracking
• DIN 50914 Testing of stainless steels for resistance to intergranular corrosion, copper sulfate-sulfuric acid method , replaced by DIN EN ISO 3651-2
• DIN 50915 Testing of unalloyed and low-alloy steels for resistance to intergranular stress corrosion cracking in attack agents containing nitrates; Welded and unwelded materials
• DIN 50916 testing of copper alloys; Stress corrosion cracking test with ammonia
  • Part 1 Testing of tubes, bars and profiles
  • Part 2 testing of components
• DIN 50918 corrosion of metals; Electrochemical corrosion studies
• DIN 50919 Corrosion of metals - Corrosion tests of bimetal corrosion in electrolyte solutions
• DIN 50920 corrosion of metals; Corrosion studies in flowing liquids
  • Part 1 General
• DIN 50923 Galvanic coatings - Duplex systems of zinc or zinc alloy coatings with organic coatings on ferrous materials
• DIN 50926 corrosion of metals; Cathodic corrosion protection with external current in the bottom area of ​​heating oil tanks made of unalloyed steel
• DIN 50927 Planning and application of electrochemical corrosion protection for the inner surfaces of apparatus, containers and pipes (internal protection)
• DIN 50928 corrosion of metals; Testing and assessment of the corrosion protection of coated metallic materials in the event of corrosion exposure from aqueous corrosion media
• DIN 50929 Corrosion of metals - probability of corrosion of metallic materials when exposed to external corrosion
  • Part 1 General
  • Part 2 installation parts inside buildings
  • Part 3 pipelines and components in soils and water
    • Supplement 1 Corrosion rates of components in water
• DIN 50930 Corrosion of Metals - Corrosion of metallic materials inside pipelines, tanks and apparatus when exposed to corrosion from water
  • Part 6 influencing the quality of drinking water
• DIN 50933 Measurement of layer thicknesses - Measurement of the thickness of layers by differential measurement with a probe
• DIN 50934 Corrosion of metals - Method for assessing the effectiveness of water treatment systems for corrosion protection
  • Part 1 General
  • Part 2 Systems to reduce the release of corrosion products into drinking water
  • Part 3 field tests to break down corrosion products from encrusted pipelines
  • Part 4 Pilot plant tests to break down corrosion products from encrusted pipelines
• DIN 50935 Chromium (VI) -free passivation of non-ferrous metals
  • Part 1 zinc die cast
  • Part 2 aluminum and aluminum alloys
• DIN 50938 Burnishing of components made of ferrous materials - Requirements and test methods
• DIN 50957 testing of galvanic baths; Electroplating Testing with the Hull Cell, General Principles
  • Part 1 standard Hull cell
• DIN 50958 Galvanic coatings - Modified Corrodkote corrosion test (mod.CORR test)
• DIN 50960 galvanic coatings
  • Part 2 drawing information
• DIN 50961 Galvanic coatings - Zinc coatings on ferrous materials - Terms, corrosion test and corrosion resistance
• DIN 50962 Galvanic coatings - Chromated zinc alloy coatings on ferrous materials
• DIN 50965 Galvanic coatings - tin coatings on iron and copper materials
• DIN 50969 Avoidance of production-related hydrogen-induced brittle fractures in high-strength steel components
  • Part 1 Preventive Measures
  • Part 2 exams
• DIN 50970 Electrolytically produced coatings - Nickel chemicals for nickel baths - Requirements and testing
• DIN 50971 Electrolytically produced coatings - Chemicals for cyanide and / or alkaline baths - Requirements and testing
• DIN 50972 Electrolytically produced coatings - Copper sulfate for copper baths - Requirements and testing
• DIN 50973 Electrolytically generated coatings; Acids for galvanic baths; conditions
• DIN 50977 Measurement of layer thicknesses - Contactless measurement of the thickness of layers on continuously moving material
• DIN 50978 testing of metallic coatings; Adhesion of coatings produced by hot-dip galvanizing
• DIN 50979 Metallic coatings - Galvanic zinc and zinc alloy coatings on ferrous materials with additional Cr (VI) -free treatments
• DIN 50986 measurement of layer thicknesses; Wedge cut method for measuring the thickness of paint and similar layers
• DIN 50990 measurement of layer thicknesses; Measurement of the mass per unit area of ​​metallic layers by atomic absorption spectrometry; Flame technology, F AAS
• DIN 51001 Testing of oxidic raw materials and materials - General working principles for X-ray fluorescence analysis (XRF)
  • Supplement 1 Overview of substance group-related digestion processes for the preparation of samples for XRF
• DIN 51002 mass spectrometry with inductively coupled plasma (ICP-MS)
  • Part 1 General principles and terms
• DIN 51003 Total reflection X-ray fluorescence analysis (TXRF) - General principles and terms
• DIN 51004 thermal analysis (TA); Determination of the melting temperatures of crystalline substances with differential thermal analysis (DTA)
• DIN 51005 thermal analysis (TA) - terms
• DIN 51006 Thermal Analysis (TA) - Thermogravimetry (TG) - Basics
• DIN 51007 Thermal Analysis (TA); Differential thermal analysis (DTA); Basics
• DIN 51008 Optical Emission Spectrometry (OES) - part
  • Part 1 Terms for systems with sparks and low pressure discharges
    • Supplement 1 Explanations
  • Part 2 Terms for systems with flames and plasmas
• DIN 51009 Optical Atomic Spectral Analysis - General Basics and Terms
• DIN 51028 Testing of filter sands for protection room ventilation - Determination of flow resistance
• DIN 51030 Testing of ceramic raw materials - Determination of the dry flexural strength of unfired products
• DIN 51032 ceramics, glass, glass ceramics, enamel; Limit values ​​for the release of lead and cadmium from consumer goods
• DIN 51043 Trass; Requirements, testing
• DIN 51045 Determination of the thermal change in length of solid bodies
  • Part 1 basics
  • Part 2 Testing of fired fine ceramic materials using the dilatometer method
  • Part 3 Testing of unfired fine ceramic materials using the dilatometer method
  • Part 4 Testing of fired coarse ceramic materials
  • Part 5 Testing of unfired coarse ceramic materials
• DIN 51060 Refractory ceramic raw materials and refractory products - Definition of the terms refractory, highly refractory
• DIN 51061 testing of ceramic raw materials
  • Part 2 sampling of ceramic raw materials
  • Part 3 sampling, refractory bricks
• DIN 51068 Testing of ceramic raw materials - Determination of thermal shock resistance - Water quenching method for refractory bricks
• DIN 51081 Testing of oxidic raw materials and materials - Determination of the change in mass during annealing
• DIN 51082 Testing of ceramic raw materials - Determination of the pH value of suspensions of non-water-soluble powders
• DIN 51084 Testing of oxidic raw materials and materials for ceramics, glass and glazes - Determination of the fluoride content
• DIN 51085 Testing of oxidic raw materials and materials - Determination of the total sulfur content
• DIN 51086 Testing of oxidic raw materials and materials for ceramics, glass and glazes
  • Part 2 Determination of Ag, As, B, Ba, Be, Bi, Ca, Cd, Ce, Co, Cr, Cu, Er, Eu, Fe, La, Mg, Mn, Mo, Nd, Ni, P, Pb, Pr, S, Sb, Se, Sn, Sr, Ti, V, W, Y, Yb, Zn, Zr by optical emission spectrometry with inductively coupled plasma (ICP OES)
  • Part 3 Spectrophotometric determination of chromium (VI) with diphenylcarbazide in the presence of chromium (III)
• DIN 51094 Ceramic tiles and plates - Testing of the lightfastness of the colorations of ceramic tiles and plates for wall and floor coverings
• DIN 51097 testing of floor coverings; Determination of the anti-slip property; Wet barefoot areas; Inspection procedure; Inclined plane
• DIN 51102 testing of ceramic raw materials
  • Part 1 Determination of the acid resistance, method with lumpy test material for sewer stone ware , rule-setting recommends the use of DIN EN 295-3
  • Part 2 Determination of acid resistance, method with granular test material , replaced by DIN EN 993-16
• DIN 51103 Testing of ceramic raw materials; Determination of alkali resistance, method with granular test material
• DIN 51104 high-performance ceramics - mechanical properties of monolithic ceramics at room temperature - determination of compressive strength
• DIN 51105 high-performance ceramics - Mechanical properties of monolithic ceramics at room temperature - Determination of the double-ring flexural strength
• DIN 51130 Testing of floor coverings - Determination of the slip-resistant property - Work rooms and work areas with a risk of slipping, inspection procedures - Inclined plane
• DIN 51131 Testing of floor coverings - Determination of the slip-resistant property - Method for measuring the coefficient of sliding friction
• DIN 51175 enamels and enamels - Determination of thermomechanical properties using a rapid test method
• DIN 51176 enamels and enamels - representation and characterization of defects
  • Part 1 chemical and apparatus emails
  • Part 2 thin-film enamels
• DIN 51177 enamels and enamels - production of enamel samples and determination of the thermal expansion coefficient
• DIN 51179 enamels and enamels - low voltage test for the detection and localization of defects on profiled surfaces - slip method
• DIN 51191 enamels and enamels - testing of sliding friction wear using a friction wheel
• DIN 51200 materials testing machines - Design and use of holding devices for samples in hardness testers
• DIN 51214 Testing of steel - Knot tensile test on round wires
• DIN 51220 General information on the requirements for materials testing machines and their testing and calibration (also applies to tensile testing machines )
• DIN 51222 Testing of metallic materials - Notched bar impact test - Special requirements for pendulum impact testers with a nominal work capacity <= 50 J and their testing
• DIN 51230 material testing machines; Dynstat device for determining flexural strength and impact strength on small specimens
• DIN 51231 materials testing machines - testing systems for components
  • Part 1 clamping fields
• DIN 51233 Materials testing machines - Safety specifications - General specifications
• DIN 51345 Testing of flame-resistant hydraulic fluids; Testing of the effect on metal materials
• DIN 51347 Testing of lubricants - testing in the mixed friction area with the lubricant testing device according to Brugger
  • Part 1 General working principles
    • Correction 1
  • Part 2 procedure for lubricating oils
• DIN 51349 Testing of lubricants - Evaluation of pistons from engine tests
  • Part 1 General
  • Part 2 gasoline engines
  • Part 3 diesel engines
• DIN 51350 testing of lubricants - testing in the four-ball apparatus
  • Part 1 General working principles
  • Part 2 Determination of the welding force of liquid lubricants
  • Part 3 Determination of wear parameters of liquid lubricants
  • Part 4 Determination of the welding force of consistent lubricants
  • Part 5 Determination of wear parameters for consistent lubricants
  • Part 6 Determination of the shear stability of polymer-containing
• DIN 51351 Testing of lubricants - Determination of the flocculation point of refrigeration oils using the pressure pipe method
• DIN 51352 testing of lubricants; Determination of the aging behavior of lubricating oils
  • Part 2 Coke residue, according to Conradson, after aging with passage of air in the presence of iron (III) oxide
• DIN 51353 Testing of insulating oils; Test for corrosive sulfur; Silver lining test
• DIN 51358 Testing of lubricants - Testing of engine anti-corrosion oils for corrosion-preventing properties - Seawater immersion test
• DIN 51360 testing of cooling lubricants; Determination of the corrosion protection properties of water-mixed cooling lubricants
  • Part 1 Herbert corrosion test
  • Part 2 Chip / filter paper process
• DIN 51363 Testing of mineral oils - Determination of the phosphorus content of lubricating oils and lubricating oil active ingredients
  • Part 2 wavelength dispersive X-ray fluorescence analysis (XRF)
  • Part 3 Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES)
• DIN 51366 testing of mineral oil hydrocarbons; Measurement of the kinematic viscosity with the Cannon-Fenske viscometer for opaque liquids
• DIN 51367 testing of cooling lubricants; Testing of the resistance of cooling lubricants emulsified in hard water
• DIN 51368 Testing of cooling lubricants; Determination of the proportion of water-mixed cooling lubricants that can be separated with hydrochloric acid
• DIN 51369 Testing of metal working fluids - Determination of the pH value of water-mixed metal working fluids
• DIN 51371 Liquid fuels - Determination of the thermal stability of EL heating oil
• DIN 51375 Testing of lubricants - Determination of the 1,2-ethanediol content in motor oils
  • Part 2 gas chromatographic method
• DIN 51377 Testing of lubricating oils - Determination of the apparent viscosity of engine lubricating oils at low temperatures between −5 ° C and −35 ° C - With the cold cranking simulator
• DIN 51378 testing of mineral oils; Determination of the carbon distribution
• DIN 51380 testing of lubricants; Determination of the low-boiling fractions in used motor oils; Gas chromatographic method
• DIN 51385 lubricants; Cooling lubricants; Terms
• DIN 51389 testing of lubricants; Mechanical testing of hydraulic fluids in the vane pump
  • Part 1 General working principles
  • Part 2 Procedure A for anhydrous hydraulic fluids
• DIN 51390 Testing of mineral oil products - Determination of the silicon content
  • Part 2 wavelength dispersive X-ray fluorescence analysis (XRF)
  • Part 4 Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES)
• DIN 51391 Testing of lubricants - Determination of the content of additive elements
  • Part 2 wavelength dispersive X-ray fluorescence analysis (XRF)
  • Part 3 Direct determination of Ca, Mg, Zn and Ba by optical emission spectral analysis with inductively coupled plasma (ICP OES)
• DIN 51396 Testing of lubricants - Determination of abrasion elements
  • Part 1 Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES)
  • Part 2 wavelength dispersive X-ray fluorescence analysis (XRF)
• DIN 51398 Testing of lubricants; Determination of the apparent viscosity of gear oils at low temperature with the Brookfield viscometer (liquid bath method)
• DIN 51399 Testing of lubricating oils - Determination of the element content from additives, abrasion and other impurities
  • Part 1 Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES)
  • Part 2 wavelength dispersive X-ray fluorescence analysis (XRF)
• DIN 51400 Testing of mineral oils and fuels - Determination of the sulfur content (total sulfur)
  • Part 1 General working principles
  • Part 2 incineration according to Grote-Krekeler; acidimetric titration; gravimetric determination
  • Part 3 cremation according to Schöniger; Thorin sulfonazo III titration
  • Part 4 incineration according to the Lingen method; Visual titration, turbidity titration
  • Part 7 microcoulometric determination, oxidative method
  • Part 10 direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES)
• DIN 51401 atomic absorption spectrometry (AAS) - terms
  • Supplement 1 Explanations
• DIN 51402 testing of exhaust gases from oil fires
  • Part 1 Visual and photometric determination of the smoke number
  • Part 2 Superplasticizer method for the detection of oil derivatives
• DIN 51403 testing of liquid fuels
  • Part 2 Determination of the water separation capacity of aviation turbine fuels with the portable microseparometer (MSEP method)
• DIN 51405 Testing of mineral oil hydrocarbons, related liquids and solvents for lacquers and paints - Gas chromatographic analysis - General working principles
• DIN 51408 Testing of mineral oil hydrocarbons - Determination of the chlorine content
  • Part 1 incineration according to Wickbold
  • Part 2 microcoulometric determination, oxidative method
• DIN 51412 Testing of mineral oil products - Determination of electrical conductivity
  • Part 1 laboratory procedure
  • Part 2 field procedures
• DIN 51417 Testing of cooling lubricants - Determination of the mineral oil content of water-miscible cooling lubricants
  • Part 2 column chromatographic method
• DIN 51418 X-ray spectral analysis - X-ray emission and X-ray fluorescence analysis (XRF)
  • Part 1 General terms and basics
  • Part 2 Terms and basics for measurement, calibration and evaluation
• DIN 51422 Testing of mineral oil products - Gas chromatographic determination of the degree of purity
  • Part 1 n-heptane, iso-octane and toluene
  • Part 2 cetane and 1-methylnaphthalene
• DIN 51423 testing of mineral oils
  • Part 1 Measurement of the relative refractive index with the precision refractometer
  • Part 2 Measurement of the relative refractive index with the Abbe refractometer
• DIN 51425 Testing of mineral oil hydrocarbons and related substances - High pressure liquid chromatographic analysis - General working principles
• DIN 51426 Testing of heating oil - Spectrophotometric determination of the red dye content in light heating oil
• DIN 51429 Testing of mineral oil products - Determination of the content of selected trace elements
  • Part 1 atomic absorption spectrometry (AAS) according to specific ashing and digestion processes
• DIN 51430 Testing of heating oil - Determination of the content of red dyes and Solvent Yellow 124 in light heating oil and in mixtures of light heating oil with unmarked mineral oil - High-performance liquid chromatography (HPLC)
• DIN 51432 testing of waste oils; Determination of the water and solvent content as well as the distillation residue; Distillation process
• DIN 51433 testing of waste oils; Determination of the mineral oil content in used oil; Infrared spectrometric method
• DIN 51435 Testing of mineral oil products - Determination of the boiling curve - Gas chromatographic method
• DIN 51436 Testing of mineral oil products - Determination of freeze inhibitor content in aviation turbine fuels - Infrared spectrometry
• DIN 51437 Testing of benzene and benzene homologues - Determination of the content of non-aromatics, toluene and C ₈ aromatics in benzene - Gas chromatography
• DIN 51438 Testing of benzene and benzene homologues - Determination of the content of thiophene in benzene - Gas chromatography
• DIN 51440 Testing of petrol - Determination of the phosphorus content
  • Part 1 wavelength dispersive X-ray fluorescence analysis (XRF)
• DIN 51441 Testing of mineral oil products - Determination of the number of colonies in mineral oil products in the boiling range below 400 ° C
• DIN 51443 Testing of lubricants - Determination of the boron content
  • Part 2 direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES)
• DIN 51444 Testing of mineral oil products - Determination of bound nitrogen - Combustion method with chemiluminescence detector
• DIN 51449 Fuels for motor vehicles - Determination of the 2-ethylhexyl nitrate (EHN) content in diesel fuels - GC / MS test method
• DIN 51451 Testing of petroleum products and related products - Infrared spectrometric analysis - General working principles
• DIN 51452 testing of lubricants; Determination of the soot content in used diesel engine oils; Infrared spectrometry
• DIN 51453 Testing of lubricants - Determination of the oxidation and nitration of used motor oils - Infrared spectrometric method
• DIN 51454 Testing of lubricants - Determination of fuel proportions in used engine oils - Gas chromatographic method
• DIN 51456 Testing of materials for semiconductor technology - surface analysis of silicon semiconductor wafers by multi-element determination in aqueous analysis solutions by means of mass spectrometry with inductively coupled plasma (ICP-MS)
• DIN 51460 Testing of mineral oil products - Procedure for sample preparation
  • Part 1 Microwave-assisted pressure digestion
  • Part 2 ashing / oxide ash
  • Part 3 Pressureless digestion with mineral acids
• DIN 51471 Liquid mineral oil products - Determination of the storage stability of heating oil EL
• DIN 51480 Electrorheological suspensions - requirements, testing and application
  • Part 1 Basics and properties independent of field strength
• DIN 51485 Lubricants - Processing media for the forming and machining of materials - Cooling and forming lubricants: Requirements and test methods
• DIN 51502 lubricants and related substances; Abbreviated designation of the lubricants and identification of the lubricant reservoir, lubricating devices and lubricating points
• DIN 51503 lubricants - refrigeration oils
  • Part 1 minimum requirements
  • Part 2 Used refrigeration oils
• DIN 51506 lubricants; Lubricating oils VB and VC without active ingredients and with active ingredients and lubricating oils VDL; Classification and requirements
• DIN 51509 lubricants; Selection of lubricants for gear drives
  • Part 1 lubricating oils
  • Part 2 plastic lubricants
• DIN 51514 Testing of lubricants - Determination of the miscibility gap of refrigeration machine oil in refrigerants using the pressure pipe method
• DIN 51515 Lubricants and regulator fluids for turbines - minimum requirements
  • Part 1 TD turbine oils for normal thermal loads
  • Part 2 TG turbine oils for increased thermal loads
• DIN 51517 lubricants - lubricating oils
  • Part 1 Lubricating Oils C; Minimum requirements
  • Part 2 lubricating oils CL; Minimum requirements
  • Part 3 lubricating oils CLP; Minimum requirements
• DIN 51519 lubricants - ISO viscosity classification for liquid industrial lubricants , replaced by DIN ISO 3448
• DIN 51520 Lubricants - Cooling lubricants - Non-water-miscible cooling lubricants SN; Minimum requirements
• DIN 51521 Lubricants - Cooling lubricants - Water-miscible cooling lubricants SE; conditions
• DIN 51522 heat transfer media Q - requirements, testing
• DIN 51524 pressure fluids - hydraulic oils
  • Part 1 hydraulic oils HL; Minimum requirements
    • Correction 1
  • Part 2 hydraulic oils HLP; Minimum requirements
    • Correction 1
  • Part 3 hydraulic oils HVLP; Minimum requirements
    • Correction 1
• DIN 51528 Testing of mineral oils and related products - Determination of the thermal stability of unused heat transfer media
• DIN 51529 Testing of mineral oils and related products - testing and assessment of used heat transfer media
• DIN 51531 Mineral oil paraffins - Determination of the oil content
• DIN 51532 mineral oil paraffins - determination of the melting point (cooling curve)
• DIN 51535 Testing of mineral oil products - Determination of the tendency to deposit in turbochargers and intercoolers of supercharged diesel engines
• DIN 51536 Testing of mineral oil products - Determination of freeze inhibitor content in aviation turbine fuels - Infrared spectrometry
• DIN 51538 Testing of lubricants - Testing of refrigerating machine oils for ammonia resistance
• DIN 51551 Testing of lubricants and liquid fuels - Determination of the coke residue
  • Part 1 Conradson's method
• DIN 51558 testing of mineral oils; Determination of the neutralization number
  • Part 1 color indicator titration
  • Part 2 color indicator titration, insulating oils
• DIN 51559 Testing of mineral oils - Determination of the saponification number
  • Part 1 saponification numbers above 2, color indicator titration
  • Part 2 color indicator titration, insulating oils
• DIN 51562 viscometry - measurement of the kinematic viscosity with the Ubbelohde viscometer
  • Part 1 design and implementation of the measurement
  • Part 2 micro Ubbelohde viscometer
  • Part 3 Relative change in viscosity with short flow times
  • Part 4 viscometer calibration and determination of the measurement uncertainty
• DIN 51563 Testing of mineral oils and related substances - Determination of the viscosity-temperature behavior - Directional constant m
• DIN 51574 Testing of lubricants - Sampling of lubricating oils from internal combustion engines
• DIN 51575 Testing of mineral oils - Determination of sulphated ash
• DIN 51576 Testing of mineral oil hydrocarbons - Determination of the salt content
• DIN 51577 testing of mineral oil hydrocarbons and similar products
  • Part 4 Determination of the chlorine and bromine content; Energy-dispersive X-ray fluorescence analysis with small spectrometers
• DIN 51579 testing of paraffin - determination of needle penetration
• DIN 51580 Testing of paraffins and waxes - Determination of cone penetration
• DIN 51581 Testing of mineral oil products - Determination of evaporation loss
  • Part 1 Noack method
  • Part 2 gas chromatographic method
• DIN 51589 Testing of lubricants and related products; Determination of the water separation capacity after steam treatment
  • Part 1 Testing of lubricating oils and flame-retardant liquids
• DIN 51595 Testing of mineral oil products - Determination of the asphaltene content - Precipitation with heptane
• DIN 51599 Testing of lubricating oils - Determination of the demulsibility (air release capacity) according to the stirring method , replaced by DIN ISO 6614
• DIN 51603 Liquid fuels - heating oils
  • Part 1 EL heating oil, minimum requirements
  • Part 3 heating oil S, minimum requirements
  • Part 4 heating oils R, minimum requirements
  • Part 5 Heizöl SA, minimum requirements
  • Part 7 SA-LW (Low Wear) heating oil with low aluminum and silicon contents, minimum requirements
• DIN 51604 FAM test liquid
  • Part 1 for polymer materials; Composition and requirements
  • Part 2 contains methanol, for polymer materials; Composition and requirements
  • Part 3 methanol-containing lower phase for polymer materials; Composition and requirements
• DIN 51605 Fuels for engines suitable for vegetable oil - Rapeseed oil fuel - Requirements and test methods
• DIN 51610 testing of liquid gases; sampling
• DIN 51612 testing of liquid gas; Calculation of the calorific value
• DIN 51613 testing of liquid gas; Determination of the elemental sulfur and the evaporation residue
• DIN 51614 testing of liquid gas; Qualitative test for ammonia, water and lye
• DIN 51618 testing of liquid gas; Calculation of the density at 15 ° C, 20 ° C and 50 ° C
• DIN 51619 Testing of mineral oil hydrocarbons - Determination of the composition of liquid gas - Gas chromatographic analysis with special consideration of 1,3-butadiene with mass fractions <= 0.1% (m / m)
• DIN 51622 liquefied gases; Propane, propene, butane, butene and their mixtures; conditions
• DIN 51623 Fuels for engines suitable for vegetable oil - Vegetable oil fuel - Requirements and test methods
• DIN 51624 Fuels for motor vehicles - Natural gas - Requirements and test methods
• DIN 51625 Fuels for motor vehicles - Ethanol fuel - Requirements and test methods
• DIN 51626 Fuels for motor vehicles - Requirements and test methods
  • Part 1 petrol E10
• DIN 51627 fuels for motor vehicles - test methods
  • Part 6 Direct determination of trace elements in vegetable oils by optical emission spectral analysis with inductively coupled plasma (ICP OES)
• DIN 51630 special petrol - petroleum ether - requirements
• DIN 51631 special petrol - boiling limit petrol - requirements
• DIN 51632 white spirit
  • Part 1 normal goods; Requirements and testing
  • Part 2 dearomatized goods; Requirements and testing
• DIN 51633 Benzene and Benzene Homologues - Requirements
• DIN 51634 special petrol; Weather lamp gasoline; Minimum requirements
• DIN 51635 special petrol - FAM normal petrol - requirements
• DIN 51637 Liquid mineral oil products - Determination of the content of bio-derived hydrocarbons in diesel fuels and middle distillates by means of liquid scintillation measurement
• DIN 51639 testing of lubricants - test methods
  • Part 1 Determination of the total base number
  • Part 4 Determination of the vegetable oil content in used diesel engine oils by means of an infrared spectrometric method
• DIN 51640 testing of liquid gas; Calculation of the vapor pressure at 40 ° C and 70 ° C
• DIN 51650 Testing of mineral oils and related products - quantity determination
• DIN 51659 lubricants - test methods
  • Part 1 Determination of the kinematic viscosity of used lubricating oils using a glass capillary viscometer
  • Part 2 Determination of the kinematic viscosity of used lubricating oils using a Stabinger viscometer
  • Part 3 Determination of the kinematic viscosity of used lubricating oils using a Houillon viscometer
• DIN 51700 Testing of solid fuels - General and overview of test methods
• DIN 51701 testing of solid fuels - sampling and sample preparation
  • Part 1 terms
  • Part 2 Carrying out the sampling
  • Part 3 Carrying out the sample preparation
  • Part 4 devices
  • Part 5 testing of precision
• DIN 51705 Testing of solid fuels - Determination of the bulk density
• DIN 51717 testing of solid fuels; Determination of the mechanical strength of hard coal coke
• DIN 51718 Testing of solid fuels - Determination of the water content and the analysis moisture
• DIN 51719 Testing of solid fuels - Determination of the ash content
• DIN 51720 Testing of solid fuels - Determination of the content of volatile components
• DIN 51721 Testing of solid fuels - Determination of the content of carbon and hydrogen - Radmacher-Hoverath method
• DIN 51722 Testing of solid fuels - Determination of the nitrogen content
  • Part 1 Semi-micro Kjeldahl method
• DIN 51723 Testing of solid fuels - Determination of the fluorine content
• DIN 51724 Testing of solid fuels - Determination of the sulfur content
  • Part 1 total sulfur
  • Part 2 species
  • Part 3 Instrumental Procedures
• DIN 51725 Testing of solid fuels - Determination of the phosphorus content
• DIN 51726 Testing of solid fuels - Determination of the content of carbonate carbon dioxide
• DIN 51727 Testing of solid fuels - Determination of the chlorine content
• DIN 51729 Testing of solid fuels - Determination of the chemical composition of fuel ash
  • Part 8 content of sodium and potassium oxide (Na ₂ O, K ₂ O)
  • Part 10 X-ray fluorescence analysis (XRF)
  • Part 11 Atomic emission spectrometric determination with inductively coupled plasma (ICP-OES)
• DIN 51730 Testing of solid fuels - Determination of the ash melting behavior
• DIN 51731 Quality of wood pellets , replaced by DIN EN ISO 17225-1, DIN EN ISO 17225-2, DIN EN ISO 17225-3
• DIN 51732 Testing of solid fuels - Determination of the total content of carbon, hydrogen and nitrogen - Instrumental methods
• DIN 51733 Testing of solid fuels - Determination of the elemental composition and calculation of the oxygen content
• DIN 51734 Testing of solid fuels - Immediate analysis and calculation of the fixed carbon
• DIN 51735 Testing of solid fuels - Determination of the plastic properties of coal with the Gieseler plastometer
• DIN 51739 Testing of solid fuels - Determination of the dilatation curve of hard coal
• DIN 51741 Testing of solid fuels - Determination of the expansion rate of hard coal
• DIN 51742 Testing of solid fuels - Determination of the grindability of hard coal according to Hardgrove
• DIN 51750 testing of mineral oils; sampling
  • Part 1 General
  • Part 2 Liquid substances
  • Part 3 ointment-like, consistent and solid substances
• DIN 51755 testing of mineral oils and other flammable liquids; Determination of the flash point in a closed cup, according to Abel-Pensky
• DIN 51756 testing of petrol
  • Part 1 Determination of the knock resistance (octane number); General
  • Part 3 Determination of the knock resistance (octane number); Determination with the BASF test engine
  • Part 7 Determination of the knock resistance (octane number) of alcohols and mixed alcohol fuels in the CFR test engine
• DIN 51757 Testing of mineral oils and related substances - Determination of density
  • Supplement 1 Notes on the application of DIN 51757
• DIN 51761 testing of benzene and benzene homologues - determination of the boiling curve according to Kraemer-Spilker
• DIN 51762 Testing of liquid fuels - Determination of the sulfuric acid reaction
• DIN 51769 testing of mineral oil products
  • Part 6 Determination of the lead content (total lead) of petrol with a mass concentration of lead above 25 mg / l; Wavelength dispersive X-ray fluorescence analysis (XRF)
  • Part 9 Determination of the lead content (total lead) of liquid mineral oil hydrocarbons with a mass fraction of lead of 50 to 1000 µg / kg, iodine monochloride digestion; Extraction with dithizone and photometric final determination of the lead dithizonate
• DIN 51773 Testing of liquid fuels - Determination of the ignitability (cetane number) of diesel fuels with the BASF test engine
• DIN 51774 testing of liquid fuels
  • Part 1 Determination of the bromine uptake according to the electrometric dead-stop method on samples with a bromine uptake of more than 0.5 g / 100 g (BA)
  • Part 2 Determination of the bromine uptake according to the electrometric dead-stop method on samples with a bromine uptake of up to 0.5 g / 100 g (BB)
  • Part 3 Determination of bromine uptake using the iodometric method (BC)
• DIN 51777 Testing of mineral oil hydrocarbons and solvents; Determination of the water content according to Karl Fischer
  • Part 1 Direct Procedure
  • Part 2 indirect method
• DIN 51784 testing of liquid fuels; Determination of the lubricating oil content in two-stroke mixtures via the determination of the evaporation residue using the inflation method
• DIN 51790 Testing of liquid fuels - Determination of the vanadium and nickel content
  • Part 4 Determination by atomic absorption spectrometry (AAS) or optical emission spectral analysis with inductively coupled plasma (ICP-OES) after ashing
  • Part 7 X-ray fluorescence analysis according to the fundamental parameter method
• DIN 51791 testing of lubricants; Determination of the content of additive elements
  • Part 2 wavelength dispersive X-ray fluorescence analysis (XRF)
  • Part 3 Direct determination of Ca, Mg, Zn and Ba by optical emission spectral analysis with inductively coupled plasma (ICP OES)
• DIN 51794 Testing of mineral oil hydrocarbons - Determination of the ignition temperature
• DIN 51796 Testing of liquid mineral oil hydrocarbons - Determination of the mercaptan sulfur content - Potentiometric method
• DIN 51797 testing of liquid fuels
  • Part 3 Determination of the sodium content, determination by atomic absorption spectroscopy after ashing
• DIN 51798 Testing of liquid fuels - Determination of the crystallization point of pure benzene
• DIN 51802 testing of lubricants; Testing of lubricating greases for corrosion-preventing properties; SKF Emcor process
• DIN 51805 testing of lubricants; Determination of the flow pressure of lubricating greases, Kesternich method
  • Part 2 Automatic procedure
• DIN 51807 testing of lubricants; Testing of the behavior of lubricating greases towards water
  • Part 1 Static test
  • Part 2 dynamic test
• DIN 51810 Testing of lubricants - Determination of the shear viscosity of lubricating greases with the rotary viscometer
  • Part 1 measuring system cone / plate
  • Part 2 Determination of the yield point with the oscillation rheometer and the plate / plate measuring system
  • Part 3 Determination of the yield point with the tilt rod method
• DIN 51811 testing of lubricants; Testing of the corrosive effect of lubricating greases on copper; Copper strip test
• DIN 51813 Testing of lubricants - Determination of the content of solid substances in lubricating greases - Particle sizes over 25 µm
• DIN 51817 Testing of lubricants - Determination of oil separation from lubricating greases under static conditions
• DIN 51818 lubricants; Classification of consistency for lubricating greases; NLGI classes
• DIN 51819 Testing of lubricants - Mechanical-dynamic testing on the rolling bearing lubricant testing device FE8
  • Part 1 General working principles
  • Part 2 procedure for lubricating greases, test bearings to be used, angular contact ball bearings or tapered roller bearings
  • Part 3 procedure for lubricating oil, test bearings to be used, axial cylindrical roller bearings
• DIN 51820 Testing of lubricants - Infrared spectrometric analysis of lubricating greases - Recording and evaluation of infrared spectra
• DIN 51821 Testing of lubricants - Testing of lubricating greases on the FAG rolling bearing grease tester FE9
  • Part 1 General working principles
  • Part 2 test method
• DIN 51825 lubricants - lubricating greases K - classification and requirements
• DIN 51826 lubricants - lubricating greases G - classification and requirements
• DIN 51828 Testing of lubricants and related products - Determination of the rapid biodegradability
  • Part 1 General
• DIN 51829 Mineral oil products - Determination of additive and abrasive elements in lubricating greases - Wavelength-dispersive X-ray fluorescence analysis
• DIN 51834 Testing of lubricants - Tribological testing in the translatory oscillation testing device
  • Part 1 General working principles
  • Part 2 Determination of friction and wear parameters for lubricating oils
  • Part 3 Determination of the tribological behavior of materials in interaction with lubricants
  • Part 4 Determination of friction and wear parameters for lubricating oils with the cylindrical roller plane geometry
• DIN 51835 mineral oil products
  • Part 1 Determination of the oxidation stability of oils by measuring the chemiluminescence
  • Part 2 Determination of the oxidation stability of lubricating greases by measuring the chemiluminescence
• DIN 51851 testing of gaseous fuels and other gases; Calculation of the reduced gas volume
• DIN 51853 Testing of fuel gases - sampling
• DIN 51854 Testing of gaseous fuels and other gases; Determination of the ammonia content
• DIN 51855 Testing of gaseous fuels and other gases - Determination of the content of sulfur compounds
  • Part 1 scope, terms
  • Part 4 hydrogen sulfide content, zinc acetate process
  • Part 6 content of hydrogen sulfide, mercaptan sulfur and carbon oxide sulfide sulfur; Potentiometric method
  • Part 7 Gas chromatographic determination of the content of sulfur-containing odorants with an electrochemical detector
  • Part 8 Gas chromatographic determination of dihydrogen sulfide, carbon oxide sulfide and other sulfur compounds with specific detectors
• DIN 51857 Gaseous fuels and other gases - Calculation of calorific value, calorific value, density, relative density and Wobbe index of gases and gas mixtures
• DIN 51862 testing of gaseous fuels and other gases; Determination of the naphthalene content (raw naphthalene)
• DIN 51863 Testing of gaseous fuels and other gases; Determination of the hydrogen cyanide content
  • Part 1 nickel carbonate process
  • Part 2 cyanogen bromide process
• DIN 51864 testing of gaseous fuels and other gases; Determination of the content of nitrogen monoxide; Saltzman method
• DIN 51865 Testing of gaseous fuels and other gases - Determination of the mercury content
  • Part 1 chemisorption on iodine, atomic absorption spectrometry (AAS)
  • Part 2 Combustion according to the modified Lingener process; Atomic Absorption Spectrometry (AAS)
  • Part 3 absorption in solutions, atomic absorption spectrometry (AAS)
• DIN 51866 temperature measurement
  • Part 1 overview of laser spectroscopic methods
  • Part 2 Rayleigh and Raman Scattering
• DIN 51869 Testing of gaseous fuels and other gases - Determination of the water content according to Karl Fischer - Coulometric method
• DIN 51870 Testing of gaseous fuels and other gases; Determination of the density ratio according to the weighing method and calculation of the density
• DIN 51871 Testing of gaseous fuels and other technical gases; Determination of the water vapor dew point; Chilled mirror method
• DIN 51872 Testing of gaseous fuels and other gases; Determination of the components
  • Part 4 gas chromatographic method
  • Part 5 capillary gas chromatographic method
• DIN 51893 gas analysis - Requirements for the specification information for analyzers
• DIN 51894 gas analysis - gas chromatographic method for fuel gases / natural gas and other gas mixtures
• DIN 51898 gas analysis - Absolute volumetric method for the dynamic production of calibration gases
  • Part 1 Production from pure gases, with CD-ROM
  • Part 2 Production from gas mixtures
• DIN 51899 gas analysis - measuring programs and evaluation methods for gas chromatography and other comparison methods
• DIN 51900 Testing of solid and liquid fuels - Determination of the calorific value with the bomb calorimeter and calculation of the calorific value
  • Part 1 General information, basic devices, basic procedures
    • Correction 1
  • Part 2 method with isoperibolic or static-jacket calorimeter
  • Part 3 procedure with adiabatic jacket
• DIN 51901 Testing of carbon materials - Determination of density using the xylene method - Solids
• DIN 51902 Testing of carbon materials - Determination of flexural strength according to the three-point method - Solids
• DIN 51903 Testing of carbon materials - Determination of the ash value - Solids
• DIN 51904 Testing of carbon materials - Determination of water content - Solids
• DIN 51905 Testing of carbon materials - Determination of coking residue; Binders and impregnating agents
• DIN 51906 Testing of carbon materials - Determination of the toluene-insoluble content; Binders and impregnating agents
• DIN 51907 Testing of carbon materials - Determination of density with the liquid pycnometer - Binding and impregnating agents
• DIN 51908 Testing of carbon materials - Determination of thermal conductivity at room temperature using a comparative method - Solids
• DIN 51909 Testing of carbon materials - Determination of the coefficient of linear thermal expansion - Solids
• DIN 51910 Testing of carbon materials - Determination of compressive strength - Solids
• DIN 51911 Testing of carbon materials - Determination of the specific electrical resistance according to the current-voltage method - Solids
• DIN 51912 Testing of carbon materials - Determination of the hydrogen content - Solids
• DIN 51913 Testing of carbon materials - Determination of density with the gas pycnometer (volumetric) using helium as measurement gas - Solids
• DIN 51914 Testing of carbon materials - Determination of tensile strength - Solids
• DIN 51915 Testing of carbon materials - Determination of the dynamic modulus of elasticity according to the resonance method - Solids
• DIN 51916 Testing of carbon materials - Determination of tapped density; Solids
• DIN 51917 Testing of carbon materials - Rockwell hardness test - ball method; Solids
• DIN 51918 Testing of carbon materials - Determination of the bulk density and the open porosity
• DIN 51919 Testing of carbon materials - Determination of the specific electrical resistance of electrodes using the current-voltage method - Solids
• DIN 51920 testing of carbon materials - determination of the softening point according to Mettler - binding and impregnating agents
• DIN 51921 Testing of carbon materials - Determination of the quinoline-insoluble content - Binding and impregnating agents
• DIN 51922 Testing of carbon materials - Determination of the ash value; Binders and impregnating agents
• DIN 51925 Testing of carbon materials - Production of test specimens from carbon-containing ramming masses and determination of their bulk density - Binding and impregnating agents
• DIN 51926 Testing of carbon materials - Determination of the content of mesophases in binders by quantitative image analysis - Binders and impregnating agents
• DIN 51930 Testing of carbon materials - Production of extruded test specimens from calcined coke - Solids
• DIN 51932 Testing of carbon materials - Determination of the bulk density of cylindrically machined electrodes
• DIN 51933 Testing of carbon materials - Determination of the content of dust-binding substances in coke by extraction - Solids
• DIN 51935 Testing of carbon materials - Determination of the permeability coefficient according to the vacuum decay method with air as measurement gas; Solids
• DIN 51936 Testing of carbon materials - Determination of thermal diffusivity at high temperatures using the laser pulse method - Solids
• DIN 51937 Testing of carbon materials - Determination of the degree of anisotropy; Solids
• DIN 51938 Testing of carbon materials - Determination of the grain size distribution by sieving; Solids
• DIN 51940 testing of carbon materials - sampling and sample preparation - solids, solid binders and impregnating agents
• DIN 51941 Testing of carbon materials - Determination of chemical composition
  • Part 1 Production of analysis samples, solids, solid binders and impregnating agents
• DIN 51942 Testing of carbon materials - Determination of the dynamic modulus of elasticity by impulse excitation - Solids
  • Correction 1
• DIN 51944 Testing of carbon materials - Determination of flexural strength using the four-point method - Solids
• DIN 51947 carbon materials - terms
• DIN 52005 Bitumen and bituminous binders - Determination of ash
• DIN 52006 Bitumen and bituminous binders - Test method for determining the effect of water on binder coatings
  • Part 1 Binder coating made from bitumen emulsion , rule setter recommends the use of DIN EN 13614
  • Part 2 Binder coating made from cold bitumen , the rule setting recommends the use of DIN EN 15626
  • Part 3 Binder coating made from flux bitumen , the rule setting recommends the use of DIN EN 15626
• DIN 52007 Bitumen and bituminous binders - Determination of viscosity
  • Part 1 General principles and evaluation
  • Part 2 measurement with the ball-drawing viscometer
• DIN 52008 test method for natural stone - assessment of the weathering resistance (including rust resistance)
• DIN 52009 test method for aggregates - determination of water absorption under pressure
• DIN 52013 Bitumen and bituminous binders - Determination of ductility
• DIN 52018 Bitumen and bituminous binders - Thermal stress in a heating chamber and determination of the change in mass due to thermal stress
• DIN 52027 Testing of carbon materials - Boiling analysis of refined coal tars
• DIN 52033 Bitumen and bituminous binders - Determination of the adhesive behavior of cold bitumen
• DIN 52034 Testing of bituminous binders, detection of tar in bitumen ; January 2003 withdrawn without replacement
  • Part 1 General information, basic devices, basic procedures
  • Part 2 method with isoperibolic or static-jacket calorimeter
  • Part 3 procedure with adiabatic jacket
• DIN 52043 Bitumen and bituminous binders - freeze-thaw cycle test on emulsions
• DIN 52045 bitumen and bituminous binders - evaporation test
  • Part 1 testing of cold bitumen
• DIN 52096 Testing of fillers for road construction - stiffening effect of filler on bitumen - stabilization index
• DIN 52098 test method for aggregates - determination of the grain size distribution by wet sieving
• DIN 52099 test method for aggregates - test for purity
• DIN 52100 natural stone - geological investigations
  • Part 2 General and overview
• DIN 52101 test method for aggregates - sampling
• DIN 52102 test method for aggregates - determination of the dry bulk density with the measuring cylinder method and calculation of the degree of tightness
• DIN 52106 Testing of aggregates - Test method for assessing weather resistance
• DIN 52108 wear test according to Böhme, grinding wheel method
• DIN 52115 test method for aggregates
  • Part 2 impact test on broken aggregates larger than 32 mm
• DIN 52117 raw felt board - concept, description, requirements
• DIN 52118 raw felt board - tests
• DIN 52123 testing of bitumen and polymer bitumen sheeting
• DIN 52129 Bare bitumen sheeting - concept, description, requirements
• DIN 52144 waterproofing membranes - Bare bitumen membranes - In-house production control
• DIN 52161 testing of wood preservatives - proof of wood preservatives in wood
  • Part 1 sampling from built-in wood
  • Part 7 Determination of the content of copper-containing wood preservatives
• DIN 52168 Testing of wood preservatives - Determination of the corrosion effect on metals
  • Part 1 wood preservatives in liquid or dissolved state
• DIN 52170 Determination of the composition of hardened concrete
  • Part 1 General, terms, sampling, dry bulk density
  • Part 2 Hydrochloric acid-insoluble and limestone and / or dolomite-containing aggregate, raw materials not available
  • Part 3 Additive insoluble in hydrochloric acid, raw materials not available
  • Part 4 Hydrochloric acid-soluble and / or -insoluble aggregate, starting materials completely or partially available
• DIN 52182 testing of wood; Determination of the bulk density
• DIN 52184 testing of wood; Determination of swelling and shrinkage
• DIN 52185 testing of wood; Determination of the compressive strength parallel to the fiber
• DIN 52186 testing of wood; Bending test
• DIN 52187 testing of wood; Determination of the shear strength in the fiber direction
• DIN 52188 testing of wood; Determination of tensile strength parallel to the fiber
• DIN 52189 testing of wood; Impact bending test
  • Part 1 Determination of the impact energy at break
• DIN 52192 testing of wood; Pressure test across the grain
• DIN 52210 Building acoustics tests - airborne and impact sound insulation
  • Part 6 Determination of the shaft level difference
• DIN 52221 Building acoustics tests - Structure-borne sound measurements in building services systems
• DIN 52230 Determination of the burglar resistance of security panes for vehicle glazing - system test
• DIN 52240 Testing of raw materials for glass production; Chemical analysis of limestone with at least 95% calcium carbonate
  • Part 1 General information and test report
  • Part 2 digestion process
  • Part 3 Determination of silicon (IV) oxide
  • Part 4 Determination of aluminum oxide
  • Part 5 Determination of the total iron content, calculated as iron (III) oxide
  • Part 6 Determination of titanium (IV) oxide
  • Part 7 Determination of the manganese content, calculated as MnO
  • Part 8 Determination of calcium oxide and magnesium oxide
• DIN 52241 Testing of raw materials for glass production; Chemical analysis of dolomite with at least 95% calcium magnesium carbonate
  • Part 1 General information and test report
  • Part 2 digestion process
  • Part 3 Determination of silicon (IV) oxide
  • Part 4 Determination of aluminum oxide
  • Part 5 Determination of the total iron content, calculated as iron (III) oxide
  • Part 6 Determination of titanium (IV) oxide
  • Part 7 Determination of the manganese content, calculated as MnO
  • Part 8 Determination of calcium oxide and magnesium oxide
• DIN 52242 Testing of glass and glass raw materials - Determination of chloride
• DIN 52251 Indirect test methods for testing the frost resistance of roof tiles
  • Part 2 Determination of water absorption
  • Part 3 Determination of the impregnation value
  • Part 5 Determination of the drying and firing shrinkage
• DIN 52252 Testing of the frost resistance of facing bricks and clinkers
  • Part 1 All-round frosting of individual bricks
  • Part 2 Frosting of bricks in test blocks
• DIN 52253 Testing of frost resistance; Roof tiles, facing tiles and clinker
  • Supplement 1 Instructions for carrying out the tests
• DIN 52270 Testing of mineral wool insulation materials - terms, delivery forms, delivery types
• DIN 52271 Testing of mineral fiber insulation materials; Behavior at higher temperatures
• DIN 52274 Testing of mineral fiber insulation materials; Tear resistance; Determination perpendicular to the insulation layer level
• DIN 52275 testing of mineral fiber insulation materials
  • Part 2 Determination of the linear dimensions and the bulk density, pipe shells
• DIN 52289 Road vehicles - Safety panes for vehicle glazing - Testing of chemical resistance
• DIN 52295 testing of glass - pendulum impact test on containers - attribute and variable testing
• DIN 52296 glass and glass ceramic; Water resistance of the surface of glass and glass ceramic plates at 98 ° C; Test procedure and classification
• DIN 52298 Road vehicles - Measurement of scattered light from safety panes for vehicle glazing
  • Part 1 ring aperture process
  • Part 2 image analysis method
• DIN 52305 Determination of the deflection angle and the refractive index of safety panes for vehicle glazing
• DIN 52306 falling ball test on safety panes for vehicle glazing
• DIN 52307 arrow drop test on safety panes for vehicle glazing
• DIN 52308 cooking test on laminated glass
• DIN 52310 Phantom drop test on safety panes for vehicle glazing
  • Part 2 experiment with delay measurement
• DIN 52315 testing of glass; Determination of the length differences in textile glass rovings and plied textile glass yarns
• DIN 52316 testing of glass; Determination of the stiffness of glass silk rovings
• DIN 52332 testing of glass; Determination of the solubility of the binder of glass silk mats in styrene
• DIN 52338 test method for flat glass in construction - ball drop test for laminated glass
• DIN 52347 testing of glass and plastic; Wear test; Friction wheel method with scattered light measurement
• DIN 52348 testing of glass and plastic; Wear test; Sand trickle method
• DIN 52367 Chipboard - Determination of the shear strength parallel to the plane of the board
• DIN 52376 testing of plywood; Determination of the compressive strength parallel to the plane of the plate
• DIN 52377 testing of plywood; Determination of the tensile modulus of elasticity and tensile strength
• DIN 52450 Testing of inorganic non-metallic building materials; Determination of shrinkage and swelling on small specimens
• DIN 52451 testing of sealants for the building industry
  • Part 1 Determination of the change in mass and volume of self-leveling sealants
• DIN 52452 Testing of sealants for the building industry - compatibility of sealants
  • Part 2 Compatibility with Chemicals
  • Part 4 Compatibility with coating systems
• DIN 52453 Testing of materials for joint and glass seals in building construction
  • Part 2 Determination of binder migration using the filter paper method
• DIN 52455 Testing of sealants for the building industry - adhesion and expansion test
  • Part 1 exposure to normal climate, water or higher temperatures
• DIN 52459 Testing of sealants for the building industry - Determination of the water absorption of backfill material - Retention capacity
• DIN 52460 joint and glass seals - terms
• DIN 52461 Testing of sealants for the building industry - Rain resistance of freshly processed, sprayable sealant
• DIN 52612 thermal insulation tests; Determination of the thermal conductivity with the plate device
  • Part 2 Further treatment of the measured values ​​for use in construction
  • Part 3 Thermal resistance of layered materials for use in construction
• DIN 52613 Determination of the thermal conductivity according to the pipe method
• DIN 52615 Determination of water vapor permeability , replaced by DIN EN ISO 12572
• DIN 52802 testing of soap; Determination of the free alkali hydroxide content
• DIN 52803 Surfactants - Analysis of technical alkane sulfonates - Determination of the content of alkane monosulfonates
• DIN 52900 Additive Manufacturing - Basics - Terminology, DIN EN ISO / ASTM 52900
• DIN 52901 Additive Manufacturing - Basics - Requirements for the procurement of additively manufactured components, DIN EN ISO / ASTM 52901
• DIN 52913 Testing of static flat seals for flange connections - pressure level test on sealing plates
• DIN 52924 Testing of paper and cardboard - Determination of extractable components
  • Part 2 Determination of soluble extractable substances
• DIN 52980 Photocatalytic activity of surfaces - Determination of the photocatalytic activity by degradation of methylene blue
• DIN 53012 Viscometry - Capillary viscometry of Newtonian liquids - Sources of error and corrections
• DIN 53014 viscometry; Capillary viscometers with circular and rectangular cross-sections for determining flow curves
  • Part 1 Basics, terms, terms
  • Part 2 Systematic deviations, causes and corrections
• DIN 53015 viscometry - measurement of viscosity with the falling ball viscometer according to Höppler
• DIN 53017 viscometry; Determination of the temperature coefficient of viscosity of liquids
• DIN 53019 Viscometry - Measurement of viscosities and flow curves with rotary viscometers
  • Part 1 basics and measurement geometry
  • Part 2 viscometer calibration and determination of the measurement uncertainty
  • Part 3 measurement errors and corrections
  • Part 4 oscillatory rheology
• DIN 53100 Metallic coatings - Electroplated nickel-chromium and copper-nickel-chromium coatings on plastics
• DIN 53107 Testing of paper and cardboard - Determination of the smoothness according to Bekk
• DIN 53108 Testing of paper and cardboard - Determination of the roughness according to Bendtsen
• DIN 53109 Testing of paper and cardboard - Determination of abrasion using the friction wheel method
• DIN 53114 paper, cardboard and cellulose; Determination of the conductivity of aqueous extracts; ISO 6587: 1980 modified
• DIN 53115 testing of paper - tear propagation test - Brecht-Imset method
• DIN 53116 Testing of paper - Determination of fat permeability
• DIN 53118 Testing of paper, cardboard and cardboard - Determination of the equilibrium moisture content in the stack or in the roll
• DIN 53119 Testing of paper - Determination of the friction behavior
  • Part 1 Recording procedure for data processing papers
  • Part 2 slip angle tester
• DIN 53120 Testing of paper and cardboard - Determination of air permeability
  • Part 1 Mean air permeability according to Bendtsen
  • Part 2 method for medium air permeability according to Schopper
• DIN 53121 Testing of paper, cardboard and paperboard - Determination of the bending stiffness according to the beam method
• DIN 53122 Testing of plastic foils, elastomer foils, paper, cardboard and other flat structures - Determination of water vapor permeability
  • Part 1 Gravimetric method
• DIN 53123 Testing of paper and cardboard - Determination of bending stiffness
  • Part 1 resonance length method
• DIN 53124 Paper, cardboard and cellulose - Determination of the pH value in aqueous extracts
• DIN 53125 Testing of paper and cardboard - Determination of the chloride content in aqueous extracts
• DIN 53126 Testing of paper and cardboard - Determination of the writability with ink
• DIN 53127 Testing of paper and cardboard - Determination of water-soluble sulfates in paper and cardboard
• DIN 53129 Testing of solid board - water absorption and thickness swelling, water storage
• DIN 53131 testing of paper - inkjet media
  • Part 1 Cockle
  • Part 2 drying time
  • Part 3 Print Image Quality - Optical Resolution, Optical Density, Color Values, Print Image Disturbances
• DIN 53133 Testing of cardboard - Determination of the water resistance of the gluing of corrugated cardboard
• DIN 53134 Testing of paper and cardboard - Determination of the ring crush resistance
• DIN 53142 testing of cardboard - puncture test
  • Part 1 test with the pendulum impact tester
  • Part 2 test with linear feed
• DIN 53145 Testing of paper and cardboard - Measurement principles for determining the reflection factor
  • Part 1 measurement on non-fluorescent samples
  • Part 2 measurement on fluorescent samples
• DIN 53146 Testing of paper and cardboard - Determination of opacity
• DIN 53147 Testing of paper; Determination of transparency
• DIN 53159 Coating materials - Determination of the degree of chalking of coatings according to Kempf
• DIN 53160 Determination of the colourfastness of everyday objects
  • Part 1 test with saliva simulant
  • Part 2 test with welding simulation
• DIN 53162 testing of paints
  • Part 2 Determination of a hiding power value of air-drying achromatic paints, auxiliary investigations
• DIN 53163 Testing of pigments and fillers; Determination of the brightness of filler and white pigment powders
• DIN 53164 Testing of pigments and fillers; Determination of the relative scattering power of white pigments; Black ground method
• DIN 53165 Testing of pigments and fillers - Determination of the relative scattering power of white pigments at different pigment volume concentrations (PVC) - Gray paste method
• DIN 53170 Solvents for coating materials - Determination of the evaporation rate
• DIN 53171 Solvents for coating materials - Determination of the boiling behavior (boiling range and boiling curve)
• DIN 53172 Solvents for coating materials - Determination of the evaporation residue
• DIN 53173 Solvents for coating materials - Determination of the carbonyl number
• DIN 53175 binders for paints and similar coating materials; Determination of the solidification point of fatty acids (Dalican method)
• DIN 53176 binders for coating materials - Determination of the amine number of water-thinnable binders
• DIN 53177 Binders for coating materials - Measurement of the dynamic viscosity of liquid resins; Resin solutions and oils with the isosceles capillary viscometer according to Ubbelohde
• DIN 53178 Testing of paints; Determination of the nitrocellulose content of paints
• DIN 53181 binders for paints and similar coating materials; Determination of the melting range of resins using the capillary method
• DIN 53184 binders for coating materials - Unsaturated polyester - test
• DIN 53195 testing of pigments; Determination of the sieve residue with water as the rinsing liquid (manual method) , replaced by DIN EN ISO 787-7
• DIN 53206 testing of pigments; Particle size analysis
  • Part 1 basic terms , replaced by DIN ISO 18451-1
• DIN 53215 Bitumen and bituminous binders - Determination of the content of non-volatile components in bituminous coating materials
• DIN 53219 Coating materials - Determination of the volume of the non-volatile components
• DIN 53221 Coating materials - Tests of coatings for recoatability
• DIN 53233 Coating materials - Determination of abrasion behavior
• DIN 53235 Testing of pigments - Tests on samples with standard color depth
  • Part 1 standard color depths
  • Part 2 Adjusting samples to standard color depth
• DIN 53236 testing of colorants; Measurement and evaluation conditions for determining color differences in paints, similar coatings and plastics
• DIN 53238 Pigments and fillers - Method for assessing the dispersing behavior
  • Part 13 dispersing in low viscosity media with a shaking machine
  • Part 34 test medium alkyd / melamine resin system III, low viscosity, oven drying
• DIN 53240 binders for coating materials - Determination of the hydroxyl number
  • Part 1 method without catalyst , replaced by DIN EN ISO 4629-1
  • Part 2 process with catalyst , replaced by DIN EN ISO 4629-2
  • Part 3 Fast Track
• DIN 53241 determination of the iodine number
  • Part 1 procedure with Wijs solution
• DIN 53245 solvents for coating materials - alcohols - delivery specification, further properties and testing
• DIN 53246 Solvents for coating materials - Acetic acid esters - Delivery specification, further properties and testing
• DIN 53247 Solvents for coating materials - Ketones - Delivery specification, further properties and testing
• DIN 53248 Solvents for coating materials - turpentine oils and pine oil - requirements and testing
• DIN 53249 Solvents for coating materials - Dipentene - Requirements and testing
• DIN 53255 Testing of wood glue and wood gluing; Determination of the bond strength of plywood glues (veneer and blockboard) in the tensile test and in the piercing test
• DIN 53281 Testing of adhesive joints - sample production
• DIN 53287 Testing of metal adhesives and metal bonds - Determination of the resistance to liquids
• DIN 53290 testing of core assemblies; Terms
• DIN 53291 testing of core assemblies; Pressure test perpendicular to the surface layer level
• DIN 53292 testing of core compounds; Tensile test perpendicular to the surface layer level
• DIN 53293 testing of core compounds; Bending test
• DIN 53294 testing of core assemblies; Shear test
• DIN 53295 testing of core assemblies; Drum peel test
• DIN 53316 Testing of leather - Detection of certain azo dyes in leather , rule setter recommends the use of DIN EN ISO 17234-1
• DIN 53323 testing of leather; Determination of the stress-strain behavior in the arching test
• DIN 53325 testing of leather; Ball pressure test to determine the elasticity of the grain and the breaking force with the loadometer
• DIN 53340 testing of leather; Determination of the permanent folding behavior of less flexible leather
• DIN 53342 testing of leather; Determination of the ironing fastness of finished leather
• DIN 53344 testing of leather; Determination of the hydrolysis resistance of finished and non-finished leather
• DIN 53345 testing of leather fatliquors; Analytical procedures
  • Part 1 sampling
  • Part 2 Identification of the ionic charge
  • Part 3 Determination of the content of water and water-soluble solvents
  • Part 4 Determination of the content of water vapor-volatile, immiscible solvents
  • Part 5 Determination of the content of fatty substances and minerals
  • Part 6 Determination of the pH value in aqueous emulsion or solution
  • Part 7 Determination of the residual fat content of liquor liquors
  • Part 8 test for electrolyte resistance
• DIN 53346 testing of fur fatliquors; Analytical procedures; Testing for electrolyte resistance
• DIN 53350 Testing of plastic films and textile fabrics provided with a plastic cover layer; Determination of bending stiffness, Ohlsen method
• DIN 53356 Testing of artificial leather and similar flat structures; Tear test , standardization body recommends the application of DIN EN ISO 4674-1
• DIN 53357 Testing of plastic sheets and sheets; Separation test of the layers , replaced by DIN 55543-5
• DIN 53359 Testing of artificial leather and similar flat structures - permanent kink test
• DIN 53360 Testing of artificial leather and similar flat structures; Determination of the total elongation (static elongation) and permanent elongation , rule setter recommends the application of DIN EN 15977
• DIN 53362 Testing of plastic foils and flat textile structures (except nonwovens), with or without a plastic cover layer - Determination of flexural rigidity - Cantilever method
• DIN 53363 Testing of plastic films - tear propagation test on trapezoidal samples with incision
• DIN 53366 Testing of plastic films and plastic sheets - Determination of the blocking force
• DIN 53369 testing of plastic films; Determination of the shrinkage force
• DIN 53370 Testing of plastic films - Determination of the thickness by mechanical scanning
• DIN 53377 Testing of plastic foils - Determination of the dimensional change
• DIN 53380 Testing of plastics - Determination of gas permeability
  • Part 1 volumetric method for measuring plastic films
  • Part 2 Manometric method for measuring plastic foils
  • Part 3 Oxygen-specific carrier gas method for measuring plastic foils and plastic molded parts
  • Part 4 Carbon dioxide specific infrared absorption method for measurements on plastic films and plastic molded parts
  • Part 5 Oxygen-specific optical gas collection method for measurements on plastic films and plastic molded parts
• DIN 53381 testing of plastics; Determination of the thermal stability of polyvinyl chloride (PVC)
  • Part 1 Dehydrochlorination Process
• DIN 53383 Testing of plastics; Testing of oxidation stability through furnace aging
  • Part 1 Test of oxidation stability through oven aging, polypropylene , replaced by DIN EN ISO 4577
  • Part 2 high density polyethylene (PE-HD); Infrared spectroscopic (IR) determination of the carbonyl content
• DIN 53390 Testing of glass fiber reinforced plastics; Bending test on unidirectional glass fiber reinforced round rod laminates
• DIN 53393 Testing of glass fiber reinforced plastics; Behavior when exposed to chemicals , rule-maker recommends the use of DIN EN ISO 175
• DIN 53394 testing of plastics; Determination of monomeric styrene in reaction resin molding materials based on unsaturated polyester resins, method with Wijs solution
  • Part 2 testing of plastics; Determination of monomeric styrene in reaction resin molding materials based on unsaturated polyester resins; Gas chromatographic method
• DIN 53399 testing of fiber-reinforced plastics
  • Part 2 shear test on flat test specimens
• DIN 53400 Testing of plasticizers; Determination of the physical and chemical parameters of plasticizers
• DIN 53402 Determination of the acid number in heavy oils or lubricating oils , replaced by DIN EN ISO 2114
• DIN 53408 Testing of plastics; Determination of the dissolution temperature of polyvinyl chloride (PVC) in plasticizers
• DIN 53419 Extruded profiles made of hard polyvinyl chloride (hard PVC); Behavior against methylene chloride (methylene chloride test)
• DIN 53428 testing of foams; Determination of the behavior towards liquids, vapors, gases and solid substances
• DIN 53435 Testing of plastics; Bending test and impact bending test on Dynstat test specimens
• DIN 53436 Generation of thermal decomposition products of materials under air supply and their toxicological testing
  • Part 1 decomposition device and determination of the test temperature
  • Part 2 method of thermal decomposition
  • Part 3 procedure for inhalation toxicological examination
  • Part 4 Process for the thermal decomposition of liquids
  • Part 5 method for the mathematical determination of toxicity
• DIN 53438 Testing of combustible materials; Behavior when flaming with a burner
  • Part 1 General information
  • Part 2 edge flaming
  • Part 3 surface flaming
• DIN 53442 testing of plastics; Endurance test in the bending area on flat test specimens
• DIN 53452 bending test , replaced by DIN EN ISO 178
• DIN 53455 testing of plastics; Tensile test , replaced by DIN EN ISO 527-1, DIN EN ISO 527-2, DIN EN ISO 527-3
• DIN 53463 Testing of plastics; Endurance test in the bending area on flat test specimens
• DIN 53464 testing of plastics; Determination of the shrinkage properties of molding materials made from thermosetting molding compounds
• DIN 53465 testing of plastics; Determination of the closing time for hardenable molding compounds
• DIN 53470 testing of molding compounds; Press tool for the production of standardized specimens from hardenable molding compounds , rule setter recommends the use of DIN EN ISO 295
• DIN 53474 Testing of plastics, rubber and elastomers - Determination of the chlorine content (digestion according to Wickbold)
• DIN 53477 Testing of plastics; Determination of the grain size distribution of molding compounds by dry sieve analysis
• DIN 53479 determination of density , replaced by DIN EN ISO 1183-1, DIN EN ISO 1183-2
• DIN 53483 testing of insulating materials; Determination of the dielectric properties
  • Part 1 Terms, General Information
  • Part 2 testing at the specified frequencies 50 Hz, 1 kHz, 1 MHz
  • Part 3 measuring cells for liquids for frequencies up to 100 MHz
• DIN 53497 Testing of plastics; Heat storage test on molded parts made of thermoplastic molding compounds, without external mechanical stress
• DIN 53498 Testing of plastics; Hot storage of pressed parts made from hardenable molding compounds
• DIN 53504 Testing of rubber and elastomers - Determination of tear strength, tensile strength, elongation at break and tension values ​​in tensile tests
• DIN 53506 Testing of rubber and elastomers; Determination of the needle tear resistance
• DIN 53508 Testing of rubber and elastomers - Artificial aging
• DIN 53512 Testing of rubber and elastomers - Determination of rebound elasticity (Schob pendulum)
• DIN 53513 Testing of rubber and elastomers; Determination of the visco-elastic properties of elastomers in the case of forced vibrations outside of resonance
• DIN 53523 Testing of rubber and elastomers; Test with the Mooney shear disk viscometer
  • Part 2 requirements for the device
  • Part 3 Determination of Mooney viscosity
  • Part 4 Determination of the scorch behavior
• DIN 53529 Testing of rubber and elastomers; Volcanometry
  • Part 1 General working principles
  • Part 2 Determination of the vulcanization process and reaction kinetic evaluation of crosslinking isotherms
  • Part 3 Determination of the cross-linking behavior with rotorless vulcanized meters
  • Part 4 Determination of the cross-linking behavior with a Vulkameter with rotor
• DIN 53530 testing of organic materials; Separation test on adhesively connected layers of fabric
• DIN 53531 Testing of rubber and elastomers; Determination of the adhesion to rigid materials
  • Part 2 test between cylinders with tapered ends
• DIN 53533 Testing of rubber and elastomers; Testing of heat generation and attrition resistance in the fatigue test (flexometer test)
  • Part 1 basics
  • Part 2 rotary flexometer
  • Part 3 compression flexometer
• DIN 53535 Testing of rubber and elastomers; Basics for dynamic test procedures
• DIN 53536 Testing of rubber and elastomers; Determination of gas permeability
• DIN 53543 Testing of semi-rigid polyurethane (PUR) integral foams; Material for soles and parts of shoes
• DIN 53545 testing of rubber and elastomers; Determination of the behavior of elastomers at low temperatures (low temperature behavior); Basics, test methods
• DIN 53548 Testing of rubber and elastomers; Determination of the freezing behavior of elastomers by module temperature measurements (Gehman test)
• DIN 53552 testing of carbon blacks; Determination of the content of the volatile components of soot during annealing
• DIN 53579 Testing of soft-elastic foams - indentation test on finished parts
• DIN 53583 Testing of pigments - Determination of fines and abrasion of pearled carbon blacks
• DIN 53598
  • Part 1 Statistical evaluation of random samples with examples from elastomer and plastic testing
• DIN 53704 testing of plastics; Determination of free phenols in phenolic molded parts
• DIN 53728
  • Part 3 Testing of plastics; Determination of the viscosity number of polyethylene terephthalate (PETP) or polybutylene terephthalate (PBTP) in dilute solution , replaced by DIN EN ISO 1628-5
  • Part 4 Testing of plastics; Determination of the viscosity of solutions, polyethylene (PE) and polypropylene (PP) in dilute solution , replaced by DIN EN ISO 1628-3
• DIN 53733 Testing of plastics; Shredding of plastic products for testing purposes
• DIN 53738 Testing of plastics; Determination of the content of hot-extractable components , replaced by DIN EN ISO 6427
• DIN 53741 testing of plastics; Determination of volatile aromatic hydrocarbons in polystyrene, gas chromatographic method
• DIN 53742 testing of plastics; Determination of the vinyl acetate content of copolymers of vinyl chloride and vinyl acetate, infrared spectrographic method
• DIN 53743 Testing of plastics; Determination of vinyl chloride (VC) in polyvinyl chloride (PVC) by gas chromatography , the regulators recommend the use of DIN EN ISO 6401
• DIN 53746 testing of plastics; Detection of polyamides
• DIN 53748 Chemical analysis of phenol-formaldehyde resins, phenoplast molding compounds and molding materials
• DIN 53752 testing of plastics; Determination of the coefficient of thermal expansion
• DIN 53754 testing of plastics; Determination of abrasion using the friction wheel method
• DIN 53765 Testing of plastics and elastomers; Thermal analysis; Dynamic differential calorimetry (DDK) , the regulator recommends the use of DIN EN ISO 11357 parts 1 to 7
• DIN 53766 Testing of apparatus and containers made of glass fiber reinforced plastics
  • Part 1 Determination of the adhesive strength in a front tensile test
• DIN 53769 Testing of pipelines made of glass fiber reinforced plastics
  • Part 1 Determination of the adhesive shear strength of pipeline parts according to pipe type B
  • Part 2 Creep internal pressure test on pipes
  • Part 3 Short-term and long-term peak pressure test on pipes
  • Part 6 internal pressure swell tests on pipes and pipeline parts
• DIN 53770 Pigments and fillers - Determination of the proportions soluble in hydrochloric acid
  • Part 1 Manufacture of acid extracts
  • Part 2 content of antimony
  • Part 3 content of arsenic
  • Part 4 content of barium
  • Part 5 content of lead
  • Part 6 Cadmium content
  • Part 7 content of chromium
  • Part 8 content of chromium (VI)
  • Part 9 content of cobalt
  • Part 10 content of copper
  • Part 11 content of manganese
  • Part 12 content of nickel
  • Part 13 content of mercury
  • Part 14 content of selenium
  • Part 15 Zinc content
  • Part 16 Determination of 12 elements by inductively coupled plasma atomic emission spectrometry
• DIN 53771 Testing of colorants in plastics; Determination of the resistance of colorants to sulfur dioxide
• DIN 53778
  • Part 1 Plastic emulsion paints for interiors - minimum requirements , replaced by DIN EN 13300
• DIN 53779 Determination of the electrical conductivity and the specific electrical resistance of aqueous extracts
• DIN 53780 Pigments and fillers - Determination of the water-soluble components - Chromium (VI) content
• DIN 53781 Coating materials - Procedure for testing the resistance of coatings to ionizing radiation in nuclear facilities
• DIN 53800 textiles - determination of the commercial dimensions
  • Part 1 Determination of dry matter by drying in a hot air stream
  • Part 2 Determination of the commercial size and the commercial fineness
• DIN 53803 sampling
  • Part 1 Statistical basics of sampling with simple distribution
  • Part 2 Practical implementation
  • Part 3 Statistical basics of sampling with double division according to two equal points of view
  • Part 4 Statistical basics of sampling with double division according to two subordinate aspects
• DIN 53804 statistical evaluations
  • Part 1 Continuous Features
    • Correction 1
    • Correction 2
  • Part 2 Countable (discrete) features
  • Part 3 ordinal features
  • Part 4 attribute characteristics
• DIN 53805 testing of textiles; Determining the length of staple fibers, terms and general principles
• DIN 53806 testing of textiles; Determination of the fiber length of cotton using the comb staple method
• DIN 53808 Testing of textiles - determination of the length of staple fibers
  • Part 1 single fiber measurement method
• DIN 53811 testing of textiles; Fiber diameter measurement in micro-projection of the longitudinal view , the rule setter recommends the use of DIN EN ISO 137
• DIN 53814 testing of textiles; Determination of the water retention capacity of fibers and thread sections
• DIN 53815 testing of textiles; Terms for the simple tensile test
• DIN 53818 Testing of textiles - Defects in spun yarns or twines and intermediate products - Terms
• DIN 53829 Testing of textiles; Determination of the evenness of yarns
  • Part 1 Testing of the force and change in length on a moving sample, basics
• DIN 53830 testing of textiles; Determination of the fineness of yarns and threads
  • Part 3 Plain yarns and twines, textured yarns; Section procedure
  • Part 4 Elasto yarns, including wrapping yarn made from elasto fibers; Section procedure
• DIN 53834
  • Part 1 Testing of textiles; Simple tensile test on yarns and twines in an air-conditioned condition , replaced by DIN EN ISO 2062
  • Part 2 testing of textiles; Simple tensile test on yarns and threads in the oven-dry state
• DIN 53835 testing of textiles; Examination of the admissible behavior
  • Part 1 basics
  • Part 2 Yarns and twines made of elastofibers, repeated tensile stress between constant elongation limits
  • Part 3 Yarns and twisted threads, one-time tensile stress between constant elongation limits
  • Part 4 Yarns and twisted threads, one-time tensile stress between constant force limits
  • Part 13 Textile fabrics, one-time tensile stress between constant elongation limits
  • Part 14 knitted goods, single tensile stress between two force limits
• DIN 53840 testing of textiles; Determination of crimp parameters on textured filament yarns
  • Part 1 filament yarns with a nominal count of up to 500 dtex
  • Part 2 filament yarns with a nominal count of more than 500 dtex
• DIN 53842 testing of textiles
  • Part 1 Knot tensile test on simple yarns and twines
• DIN 53843 testing of textiles
  • Part 1 loop tensile test; Yarn
  • Part 2 loop tensile test on staple fibers
• DIN 53852 testing of textiles; Determination of yarn length ratios in woven and knitted fabrics
• DIN 53856 Testing of textiles - Determination of the mass fractions of warp and weft
• DIN 53859 testing of textiles; Tear test on textile fabrics
  • Part 5 trapezoidal tear test
• DIN 53860 testing of textiles; Testing of the tendency of textile fabrics to buckle
  • Part 1 elbow method, static load
• DIN 53861 testing of textiles
  • Part 3 buckling and bursting test, tables for test evaluation
• DIN 53863 testing of textiles
  • Part 1 abrasion tests of textile fabrics, general
  • Part 2 abrasion tests of textile fabrics, circular abrasion test
• DIN 53864 testing of textiles; Determination of bending stiffness, Schlenker method
• DIN 53865 Testing of textiles - Determination of the fiber migration tendency - Tumbler method
• DIN 53866 testing of textiles; Shrinkage behavior of single and twisted yarns
  • Part 4 Determination of the shrinkage in steam , withdrawn without replacement
  • Part 12 Determination of the shrinkage force in gaseous and liquid media; Section procedure
• DIN 53867 testing of textiles; Determination of pill behavior; Testing according to the flapping wing method (random tumble pilling tester) , the rule setter recommends the use of DIN EN ISO 12945-3
• DIN 53882 testing of textiles; Determination of the sewability of knitted fabrics; Mesh burst damage
• DIN 53885 Textiles - Determination of the compressibility of textiles and textile products
• DIN 53890 testing of textiles; Determination of the crease recovery angle of textile fabrics, measurement method on the air-dry sample with horizontal fold edge and upright free leg
• DIN 53892 testing of textiles
  • Part 2 Determination of the dimensional change of fabrics with repeated exposure to moisture and dry air
• DIN 53894 testing of textiles
  • Part 1 Determination of dimensional changes in textile fabrics, ironing with a damp ironing cloth on ironing presses
  • Part 2 Determination of the dimensional change of textile fabrics, steaming on ironing machines
• DIN 53896 testing of textiles; Artificial aging through increased temperature in air or oxygen
• DIN 53902 testing of surfactants, determination of foaming power
  • Part 1 Perforated disc impact method , January 2000 replaced by DIN EN 12728
  • Part 2 Modified Ross Miles Method
• DIN 53919 standard cotton fabric for assessing washing processes
  • Part 2 Testing of washing procedures with control strips
• DIN 53923 testing of textiles; Determination of the water absorption capacity of textile fabrics
• DIN 53924 Testing of textiles - Determination of the suction speed of textile fabrics against water (rising height method)
• DIN 53930 testing of textiles; Determination of the resistance of textiles to damage by microorganisms, general information and sample pretreatment, rule-setters recommend the use of DIN EN ISO 11721-1
• DIN 53931 testing of textiles; Determination of the resistance of textiles to mold, fouling test , rule setter recommends the application of DIN EN 14119
• DIN 53941 Testing of textiles - Determination of the micronaire value of cotton fibers
• DIN 53943 Testing of textiles; State of maturity of cotton fibers
  • Part 1 terms
  • Part 2 Determination of the degree of ripeness, microscopic method, swelling with sodium hydroxide solution
• DIN 53944 testing of textiles; Determination of the span length and the evenness factor of cotton
• DIN 53978 tetrachlorethylene (perchlorethylene) - requirements and tests
• DIN 54005 Testing the color fastness of textiles; Determination of the water fastness of dyeings and prints (light exposure)
• DIN 54015 Testing the color fastness of textiles; Determination of the peroxide wash fastness of dyeings and prints , rule setter recommends the use of DIN EN 20105-N01, DIN EN ISO 105-N02
• DIN 54016 Testing the color fastness of textiles; Determination of the hypochlorite wash fastness of dyeings and prints , rule setter recommends the use of DIN EN 20105-N01, DIN EN ISO 105-N02
• DIN 54034 Testing the color fastness of textiles; Determination of the hypochlorite bleaching fastness of dyeings and prints (light exposure)
• DIN 54046 Testing the color fastness of textiles; Determination of the color fastness in the acid chlorination of wool
• DIN 54056 Testing the color fastness of textiles; Determination of the color fastness of dyeings and prints to sublimation on storage
• DIN 54113 Non-destructive testing - Radiation protection rules for the technical application of X-ray equipment up to 1 MV
  • Part 1 General safety requirements
  • Part 2 Safety requirements and testing for manufacture, construction and operation
  • Part 3 formulas and diagrams for radiation protection calculations for X-ray equipment up to a tube voltage of 450 kV
    • Supplement 1 Assessment of control areas
• DIN 54115 Non-destructive testing - Radiation protection rules for the technical application of enclosed radioactive substances
  • Part 1 Fixed and mobile handling in gamma radiography
    • Supplement 1 Assessment of Control Areas
  • Part 3 Organization of radiation protection when handling and transporting gamma radiography
  • Part 4 Manufacture and testing of portable radiation devices for gamma radiography
  • Part 5 Structural radiation protection measures for gamma radiography
  • Part 6 inspection, maintenance and functional testing of radiation devices in gamma radiography
  • Part 7 Storage of radioactive substances - Requirements for storage facilities and their installation rooms for protection against radiation, fire and theft
• DIN 54123 Non-Destructive Testing; Ultrasonic method for testing welded , rolled and explosive cladding , rule setter recommends application of DIN EN ISO 17405
• DIN 54130 non-destructive testing; Magnetic leakage flux method, general , regulators recommends the use of DIN EN ISO 9934-1
• DIN 54136 Non-Destructive Testing; Magnetic leakage flux test with probe scanning
  • Part 1 basics
• DIN 54140 Non-Destructive Testing; Inductive process
  • Part 3 Representation and general properties of coil systems
• DIN 54141 Non-Destructive Testing; Eddy current testing of pipes
  • Part 1 General information on testing with feed-through coils using the single-frequency method
  • Part 2 control method for determining the properties of an eddy current test system with through-flow coils
  • Part 3 Execution of the eddy current test
• DIN 54145 Non-destructive testing - Electromagnetic detection methods
  • Part 1 Passive Magnetics
  • Part 2 Active electromagnetic induction processes
• DIN 54150 Non-Destructive Testing; Impression process for surface testing (replica technique)
• DIN 54161 Non-destructive testing - qualification of test workers for non-destructive testing
• DIN 54162 Non-destructive testing - Qualification and certification of personnel for thermographic testing - General and special basics for levels 1, 2 and 3 , rule-maker recommends the use of DIN EN ISO 9712
• DIN 54180 Non-Destructive Testing - Shearography
  • Part 1 General Basics
  • Part 2 devices
• DIN 54190 Non-destructive testing - Thermographic testing
  • Part 1 General principles , replaced by DIN EN 16714-1
  • Part 2 devices , replaced by DIN EN 16714-2
  • Part 3 terms , replaced by DIN EN 16714-3
• DIN 54191 Non-destructive testing - Thermographic testing of electrical systems
• DIN 54192 Non-Destructive Testing - Active Thermography
• DIN 54204 testing of textiles; Quantitative determination of the proportions of binary mixtures, wool with other fibers, potassium hydroxide method
• DIN 54209 testing of textiles; Quantitative determination of the proportions of binary mixtures, deburred mulberry silk with wool, formic acid / zinc chloride method
• DIN 54212 testing of textiles; Quantitative determination of the proportions of binary mixtures, casein fibers with other fibers, trypsin method
• DIN 54221 testing of textiles; Quantitative determination of the proportions of binary mixtures, polyamide 6 6 or polyamide 6 fibers with other fibers, hydrochloric acid method
• DIN 54231 textiles - detection of disperse dyes
• DIN 54232 textiles - Determination of the content of compounds based on chlorobenzene and chlorotoluene
• DIN 54233 Testing of textiles - Determination of metals
  • Part 1 Determination of metals using microwave digestion
  • Part 2 Determination of extractable metals with hydrochloric acid
  • Part 3 Determination of extractable metals with acidic synthetic sweat solution
  • Part 4 Determination of extractable metals with synthetic saliva solution
• DIN 54270 testing of textiles; Determination of the intrinsic viscosity of celluloses
  • Part 1 basics
  • Part 2 Cuen process
  • Part 3 EWNN _{mod (NaCl)} process
• DIN 54274 testing of textiles; Quantitative determination of the amino end groups in polyamide fibers
• DIN 54275 testing of textiles; Determination of the pH value of fiber material, extrapolation method
• DIN 54278 Testing of textiles - deposits and accompanying substances
  • Part 1 Determination of the substances soluble in organic solvents
• DIN 54279 testing of textiles; Determination of the urea / bisulfite solubility of wool
• DIN 54280 testing of textiles; Determination of the acid content of wool
• DIN 54281 testing of textiles; Determination of the alkali solubility of wool
• DIN 54282 testing of textiles; Determination of the acetic acid content in acetate or triacetate fibers
• DIN 54285 testing of textiles; Determination of the size content
• DIN 54286 testing of textiles; Determination of the cysteic acid content in wool hydrolyzates
• DIN 54287 testing of textiles; Determination of the alkali content of wool
• DIN 54288 testing of textiles; Quantitative determination of sulfur in viscose fibers
• DIN 54289 testing of surfactants and textile auxiliaries; Testing of the effect of dye accelerators when dyeing polyester textiles with disperse dyes
  • Part 1 Testing of the acceleration effect
  • Part 2 Determination of the achievable color yield
• DIN 54290 testing of surfactants and textile auxiliaries; Testing of the effect of leveling agents when dyeing polyester textiles with disperse dyes under high temperature conditions
  • Part 1 testing of the migration effect
  • Part 2 testing of the restraint effect
  • Part 3 testing of the braking effect
• DIN 54295 textile dyeing - terms
• DIN 54310 testing of textiles; Separation of the fixed interlining material from the outer material, mechanical separation test
• DIN 54332 testing of textiles; Determination of the burning behavior of textile floor coverings , regulators recommend the application of DIN EN ISO 9239-1
• DIN 54333 testing of textiles; Determination of the burning behavior; Horizontal method
  • Part 1 ignition by edge flame
• DIN 54334 testing of textiles; Determination of the burning behavior, ignition time, edge ignition
• DIN 54335 testing of textiles; Determination of the burning behavior, 45 ° method, ignition by edge flaming
• DIN 54341 Testing of seats for rail vehicles in public transport; Determination of the burning behavior with a paper cushion
• DIN 54345 testing of textiles; Electrostatic behavior
  • Part 1 Determination of electrical resistance quantities
  • Part 3 Apparatus determination of the charging of textile floor coverings
  • Part 4 Determination of the electrostatic chargeability of textile fabrics
  • Part 5 Determination of the electrical resistance on strips of textile fabrics
• DIN 54355 testing of pulp; Determination of the resistance of cellulose to caustic soda (alkali resistance)
• DIN 54356 testing of cellulose; Determination of the alkali solubility of cellulose
• DIN 54357 testing of pulp; Determination of the kappa number
• DIN 54360 fibrous material - laboratory milling - Jokro-Mühle method
• DIN 54361 testing of cellulose; Determination of the pentosan content, furfural method
• DIN 54363 Testing of pulp and paper; Determination of the iron, manganese, copper, calcium and magnesium contents, determination by atomic absorption spectroscopy (AAS)
• DIN 54370 Testing of paper and cardboard - Determination of the residue on ignition
• DIN 54372 testing of pulp and paper; Determination of calcium and magnesium content; Titrimetric determination
• DIN 54373 Testing of pulp, paper and cardboard; Determination of the acid-insoluble fraction in the residue on ignition
• DIN 54377 testing of pulp and paper; Determination of the silicon (IV) oxide content
  • Part 1 Gravimetric method
  • Part 2 photometric method
• DIN 54378 Testing of paper, cardboard and cardboard; Determination of the number of surface colonies (OKZs)
• DIN 54379 testing of paper, cardboard and cardboard; Determination of the total number of colonies (GKZ)
• DIN 54383 testing of paper, cardboard and cardboard; Determination of clostridial spores
• DIN 54385 Solid secondary fuels - Obtaining representative analysis samples from heterogeneous materials with low bulk density using the press drilling method
• DIN 54386 Testing of paper, cardboard and cellulose; Photometric determination of the copper content with bathocuproin; Determination after digestion of nitric acid
• DIN 54387 Testing of ceramic raw materials - Chemical analysis of boron carbide, boron nitride, metal borides and elemental boron
  • Part 1 General information and sample preparation
  • Part 2 Determination of total boron, soluble boron compounds, HNO₃-soluble boron in B₄C, H₂O₂-soluble and insoluble parts in amorphous boron and HF / HNO₃-insoluble parts in titanium boride
  • Part 3 Determination of the non-metallic main and secondary components total carbon, total oxygen and total nitrogen as well as the free carbon in B₄C and the drying loss in amorphous boron
  • Part 4 Determination of main metallic components and trace impurities
• DIN 54388 Solid secondary fuels - Determination of the water-soluble content of chloride, sodium and potassium via the pressing fluid using the pressing method
• DIN 54400 ion exchange - terms
• DIN 54401 Testing of ion exchangers, adsorber resins and hybrid adsorbers - sampling
• DIN 54402 Testing of ion exchangers - Determination of the total capacity of anion exchangers
• DIN 54403 Testing of ion exchangers - Determination of the total capacity of cation exchangers
• DIN 54406 Testing of ion exchangers - Determination of the resistance to osmotic and hydromechanical stress , rule setter recommends the application of DIN 19633
• DIN 54407 Testing of ion exchangers - Determination of the particle size distribution
• DIN 54408 Testing of ion exchangers - Determination of the bulk density, the equilibrium moisture content and the dry matter content
• DIN 54410 Testing of ion exchangers - Determination of density
• DIN 54413 Testing of ion exchangers - Determination of the organic carbon that can be extracted with water
• DIN 54455 Testing of metal adhesives and metal bonds; Torsional shear test
• DIN 54456 Testing of structural adhesives and bonds - climatic resistance test
• DIN 54457 structural adhesives - testing of adhesive bonds - bead peeling test
• DIN 54458 Structural Adhesives - Determination of the flow and application behavior of viscoelastic adhesives with the help of oscillatory rheometry
• DIN 54459 structural adhesives - testing of adhesive bonds - production of lap shear samples from coil-coated sheet metal
• DIN 54461 structural adhesives - testing of adhesive joints - bending peel test
• DIN 54500 Testing of paper - Determination of the density-related light scattering and light absorption coefficients of fibers and papers
• DIN 54514 Testing of paper and cardboard - Determination of the initial wet strength (Initial Wet Web Strength) by tensile loading
• DIN 54515 Testing of paper and cardboard - Determination of water repellency
• DIN 54516 Testing of paper and cardboard - Determination of the gap resistance
• DIN 54517 Testing of paper and cardboard - Determination of wet elongation
• DIN 54518 Testing of paper and cardboard - strip crush resistance
• DIN 54519 Testing of cardboard - Determination of the edge crush resistance of solid cardboard
• DIN 54530 paper and cardboard - testing of cores made of coreboard
  • Part 10 determination of roughness
• DIN 54540 testing of hygiene products - tissue and nonwovens
  • Part 5 Determination of the wet expansion
  • Part 9 Determination of the moisture content
• DIN 54600 testing of paper and cardboard; Testing for antimicrobial additives
  • Part 1 Determination of the content of tetramethylthiuram disulfide (TMTD)
  • Part 8 Determination of the content of methylene bis-thiocyanate
• DIN 54603 Testing of paper, cardboard and paperboard - Determination of the glyoxal content
• DIN 54604 testing of paper and cardboard; Determination of the starch content
  • Part 1 Enzymatic determination of native starch
• DIN 54605 Testing of pulp, paper and cardboard; AAS determination of the cadmium content
• DIN 54607 Tissue paper and tissue products - Determination of the dry color abrasion of table decoration products - Abrasion test
• DIN 54800 testing of plastics; Production of polyvinyl chloride (PVC) pastes for testing purposes , the rule- maker recommends the use of DIN EN ISO 11468
• DIN 54801 testing of plastics; Determination of the apparent viscosity at high speed gradients of polyvinyl chloride (PVC) pastes with the Severs capillary viscometer
• DIN 54802 Testing of plastics - Determination of plasticizer absorption and the plasticizer absorption rate in the heat of vinyl chloride (VC) polymers
  • Part 1 planetary mixer process
  • Part 2 Static procedure
• DIN 54811 testing of plastics; Determination of the flow behavior of plastic melts with a capillary rheometer
• DIN 54813 testing of plastics; Testing of collars made of textile glass-reinforced thermosetting plastics; Determination of the breaking force in the bending shear test
• DIN 54815 pipes made of filled polyester resin molded materials , the rule-maker recommends the use of DIN EN 14636-1
  • Part 1 dimensions, material, marking
  • Part 2 requirements, testing
• DIN 54836 testing of combustible materials; Determination of the ignition temperature
• DIN 54837 Testing of materials, small parts and component sections for rail vehicles - Determination of the burning behavior with a gas burner
• DIN 54841 warning device made of plastic for underground cables and pipes
  • Part 3 Detectable alignment tape
  • Part 5 cable cover
• DIN 55003 symbols for NC machine tools
  • Part 3 machine tools; Pictograms; Numerically controlled machine tools , regulators recommend the use of DIN ISO 7000
• DIN 55058 spindle heads for adjusting sleeves; Connection dimensions
• DIN 55170 single column table eccentric presses; Sizes
• DIN 55181 machine tools; Mechanical double-column presses, single-acting with nominal forces from 400 kN to 4000 kN; Sizes
• DIN 55184 machine tools; Mechanical single column presses; Installation space for tools; Sizes, clamping plates, insert plates, insert rings
• DIN 55185 machine tools; Mechanical two-column high-speed presses with nominal forces from 250 kN to 4000 kN; Sizes
• DIN 55189 machine tools; Determination of characteristic values ​​for pressing of sheet metal processing under static load
  • Part 1 mechanical presses
  • Part 2 hydraulic presses
• DIN 55200 machine tools; T-slot distances; Dimensions
• DIN 55201 machine tools; Machine tool pallets
  • Part 1 nominal sizes up to 800 mm; Form A
  • Part 2 nominal sizes from 1000 mm; Form B
• DIN 55301 design of statistical tables
• DIN 55303 Statistical evaluation of data
• DIN 55350 terms of quality assurance and statistics
  • Supplement 1 Structure and general index
  • Part 11 terms of quality management
  • Part 12 Feature-related terms
  • Part 13 Terms for the accuracy of investigation procedures and investigation results
  • Part 14 Terms of sampling
  • Part 15 Terms about patterns
  • Part 16 Terms of Quality Assurance; Terms relating to quality assurance systems (draft)
  • Part 17 Terms of the quality inspection types
  • Part 18 Terms relating to certificates of the results of quality tests; Quality inspection certificates
  • Part 21 Concepts of Statistics; Random sizes and probability distributions
  • Part 22 Concepts of Statistics; Special probability distributions
  • Part 23 Concepts of Statistics; Descriptive statistics
  • Part 24 Concepts of Statistics; Closing statistics
  • Part 31 Terms of acceptance sample testing
  • Part 33 Terms of statistical process control (SPC)
  • Part 34 Detection limit , detection limit and detection capacity, replaced by DIN ISO 11843-1
• DIN 55402 marking for the dispatch of packages
  • Part 2 Guideline for Export Packaging
• DIN 55403 packaging test - test method for packaging films - determination of the tendency to curl
• DIN 55404 packaging test - test method for determining the repeat length for flexible packaging materials
• DIN 55405 Packaging - Terminology - Terms
• DIN 55406 Packaging - Special technical delivery, purchase and use conditions for one or two-part 28 mm screw caps made of polyethylene (PE) or polypropylene (PP) and 28 mm roll-on caps made of aluminum (Al)
• DIN 55407 Packaging - General technical delivery and purchase conditions (ATLB)
  • Part 2 catalog of errors
• DIN 55409 Packaging - Test method for determining opening forces on peelable packaging
  • Part 1 Flexible packaging
  • Part 2 dimensionally stable packaging
• DIN 55423 transport chain for meat and meat products
  • Part 1 Rigid, stackable reusable transport and storage boxes made of plastic; Dimensions, weights, design
  • Part 2 Rigid, stackable reusable transport and storage boxes made of plastic; Requirements and tests
  • Part 5 pallet made of polyethylene, 800 mm × 1200 mm × 160 mm; Dimensions, weights
  • Part 6 pallet made of polyethylene, 800 mm × 1200 mm × 160 mm; Execution, requirements and testing
• DIN 55426 packaging test - determination of the high pressure coefficient of friction
• DIN 55428 packaging materials - solid cardboard
  • Part 1 requirements, testing
  • Part 2 wet strength; Requirements, testing
• DIN 55429 packaging; Boxes made of cardboard, solid cardboard or corrugated cardboard
  • Part 2 dimensions, tolerances, checking the dimensions
• DIN 55437 testing of cardboard - creasing
  • Part 1 Laboratory production of test grooves
  • Part 2 Determination of the creasability range by visual evaluation of the creases
  • Part 3 Determination of the technical quality
• DIN 55440 packaging testing; Compression test
  • Part 1 test with constant feed rate
• DIN 55441 packaging test - impact test
  • Part 2 Free fall of plastic bottles
• DIN 55445 packaging test; Testing of seams on bags
  • Part 1 Determination of the breaking life of seams on paper sacks
  • Part 2 Determination of the breaking life of seams on plastic bags
  • Part 3 evaluation procedure
• DIN 55446 packaging; Packaging materials, packs and packages ready for dispatch; Sampling for testing
• DIN 55450 packaging; Pouches and sachets of paper; to form
• DIN 55455 packaging; Carrier bags and bags made of paper; to form
• DIN 55457 packaging test - Containers made of polyolefins , rule-maker recommends the use of DIN EN ISO 16495
  • Part 1 Resistance to stress cracking; Temperature method
  • Part 2 resistance to stress cracking; Pressure-temperature method
• DIN 55461 bulk packaging; Flexible IBC
  • Part 2 dimensions
• DIN 55468 packaging materials - corrugated cardboard
  • Part 1 requirements, testing
  • Part 2 wet strength, requirements, testing
• DIN 55471 polystyrene foam for packaging purposes
  • Part 1 requirements, testing
  • Part 2 Calculation and design of molded packaging parts
• DIN 55473 packaging aids - desiccant bags - technical delivery conditions
• DIN 55474 packaging aids - desiccant bags - application, calculation of the required number of desiccant units
• DIN 55475 Packaging aids - Adhesive strips made of Kraft paper - Unreinforced or reinforced, can be activated with water or heat; Requirements and testing
• DIN 55477 packaging aids; Plastic adhesive tapes; Unreinforced and reinforced; Requirements and testing
• DIN 55479 packaging - types of closure of boxes with adhesive tapes and adhesive strips
• DIN 55480 packaging; Aluminum jars with screw caps, round
• DIN 55481 polyethylene foam for packaging purposes
  • Part 1 requirements, tests
• DIN 55482 polyurethane foam for packaging purposes
  • Part 1 requirements, tests
• DIN 55483 Gummed fibers and / or hair for packaging purposes
  • Part 1 requirements, testing
• DIN 55505 aerosol packaging; Determination of the cap seat height
• DIN 55507 aerosol packaging; Work surfaces of clinching pliers
• DIN 55510 Packaging - Modular coordination in packaging
  • Part 1 basics
  • Part 2 terminology
  • Part 3 rules and dimensions
• DIN 55512 packaging; Single packs; Paper, office supplies, stationery
  • Part 7 selection dimensions
• DIN 55520 storage areas for shipping packaging, derived from the storage areas 800 mm × 1200 mm and 1000 mm × 1200 mm
• DIN 55522 packaging; Boxes made of cardboard; Folding boxes with tuck-in bottom and tuck-in lids; Determination of the dimensions of boxes
• DIN 55524 packaging - quality features
  • Part 1 Quality features for corrugated cardboard packaging
  • Part 2 Quality features for packaging made from solid cardboard
• DIN 55525 thread, preferably for plastic and glass containers with a uniform screw cap; Buttress thread; Dimensions
• DIN 55529 Packaging - Determination of the seal seam strength of seals made of flexible packaging materials
• DIN 55530 foils for packaging purposes - foils and recyclates made of low-density polyethylene (PE-LD) for use as barrier material
• DIN 55531 foils for packaging purposes - aluminum composite foils
• DIN 55533 packaging test - integral leak test method for film packaging with a flexible test chamber and test gas
• DIN 55534 Testing of the taste transition of packaging materials and packaging through the air space with the test substance water
• DIN 55540 package test
  • Part 1 Determination of the filling level of prepackages, volume-stable packaging, filling quantity marked by weight
    • Supplement 1 form with coefficient of variation of the product density and the packaging for adhesives and related products
    • Supplement 2 Form with coefficient of variation of the product density and the packaging for plant treatment products and related products
    • Supplement 3 Form with coefficient of variation of the product density and the pack for laundry detergents and related products
    • Supplement 4 Form with coefficient of variation of the product density and the packaging for cleaning and care products
• DIN 55542 packaging test; Determination of the volume for packaging
  • Part 2 cylindrical tubes
  • Part 4 conical tubes
• DIN 55543 packaging test - test method for packaging films
  • Part 1 Determination of the film thickness
  • Part 2 Determination of the peel resistance of glue seams on bags
  • Part 3 Determination of the strength of longitudinal seams on sacks and bags
  • Part 4 Determination of the shrinkage of plastic films in a liquid bath
• DIN 55545 packaging - packaging with insulating properties
  • Part 1 initial assessment test
• DIN 55571 hot tack
  • Part 1 Distance measuring test devices
  • Part 2 force measuring test devices
• DIN 55560 Resealable child-resistant packs; Plastic screw caps with a pressure-turn system (axial pressure force)
  • Part 1 Mechanical trick system test , replaced by DIN EN ISO 13127
• DIN 55600 Testing of pigments - Determination of the significance of color differences in body colors according to the CIELAB formula
  • Supplement 1 calculation example and example for test report
• DIN 55601 testing of pigments; Determination of a hiding power value of dried, pigmented paints from a wedge-shaped layer
• DIN 55603 Testing of pigments - Determination of the relative color strength and the residual color difference of inorganic pigments in white lightening according to the brightness method
  • Supplement 1 calculation example and example for the test report
• DIN 55607 Pigments and fillers - Dispersion of pigments in powder coatings and their colorimetric assessment after application
• DIN 55608 Pigments and fillers - Determination of the water number
• DIN 55609 Pigments and fillers - Determination of water-soluble sulphates, chlorides and nitrates by ion chromatography
• DIN 55610 Testing of pigments and solvent-soluble dyes; Determination of unsulfonated, primary aromatic amines
• DIN 55625 fillers for plastics
  • Part 4 chalk, requirements and test methods
  • Part 5 Natural crystalline calcium carbonate, requirements and test methods
  • Part 6 Precipitated calcium carbonate, requirements and test methods
  • Part 7 dolomite, requirements and test methods
  • Part 10 adhesions of natural platelet-shaped, carbonate-containing talc and chlorite - Requirements and test methods
  • Part 23 phlogopite; Requirements and test methods
  • Part 24 magnesium hydroxide; Requirements and test methods
• DIN 55626 fillers and pigments for paper and cardboard - requirements and test methods
  • Part 3 Blanc fixe
  • Part 4 chalk
  • Part 5 Natural crystalline calcium carbonate
  • Part 6 Precipitated calcium carbonate
  • Part 8 Natural kaolin
  • Part 9 Calcined Kaolin
  • Part 10 adhesions of natural platelet-shaped talc and chlorite
  • Part 11 Natural, platelet-shaped, carbonate-containing talc
  • Part 18 Precipitated sodium aluminum silicate
  • Part 19 Precipitated silica
  • Part 20 Fumed silica
  • Part 25 silica gel
  • Part 26 titanium dioxide
• DIN 55633 Coating materials - Corrosion protection of steel structures by powder coating systems - Evaluation of the powder coating systems and execution of the coating
• DIN 55634 Coating materials and coatings - Corrosion protection of load-bearing thin-walled components made of steel
• DIN 55651 solvents for coating materials - abbreviations
• DIN 55652 Solvents for coating materials - Determination of acidity in the trace range , rule setter recommends the use of DIN EN ISO 2114
• DIN 55653 Coating materials - Determination of the settling behavior
• DIN 55654 scratch test with a linear stroke device (crockmeter)
• DIN 55655 Coating materials - Electrodeposition paints
  • Part 1 Terms and general principles
  • Part 2 wrap around
  • Part 3 Compatibility of electrodeposition paints with a reference oil
  • Part 4 Compatibility of electrodeposition paints with liquid, pasty and solid foreign materials
  • Part 5 Determination of the sieve residue
  • Part 6 immersion markings
• DIN 55656 coating materials - scratch test with a hardness test stick
• DIN 55657 Coating materials - Test method for assessing the adhesive strength of elastic adhesives on coatings by testing the peel adhesion, peel strength and tensile shear strength with additional stress through condensation testing or cataplasm storage
• DIN 55658 Coating materials - Practical determination of the non-volatile and volatile content during the coating process
• DIN 55659 Coating materials - Determination of the pH value
  • Part 1 pH electrodes with glass membrane
  • Part 2 pH electrodes with ISFET technology
• DIN 55660 coating materials - wettability
  • Part 1 Terms and general principles
  • Part 2 Determination of the surface free energy of solid surfaces by measuring the contact angle
  • Part 3 Determination of the surface tension of liquids using the hanging drop method
  • Part 4 Determination of the polar and disperse part of the surface tension of liquids from an interfacial tension
  • Part 5 Determination of the polar and disperse portion of the surface tension of liquids from contact angle measurements on a solid with a purely disperse portion of the surface energy
  • Part 6 Measurement of the dynamic contact angle
  • Part 7 measurement of the contact angle in tilting table experiments (roll-off angle)
• DIN 55662 Coating materials - Coatings for the automotive industry - Testing of resistance to pressurized water jets (steam jet test) , replaced by DIN EN ISO 16925
• DIN 55663 Coating materials - Artificial weathering with acidic exposure, replaced by DIN EN ISO 15110
• DIN 55665 Coating materials - Outdoor weathering of coatings - Testing of the corrosion protection behavior
• DIN 55667 Coating materials - Determination of electrical conductivity and specific electrical resistance , replaced by DIN EN ISO 15091
• DIN 55670 Coating materials - Testing of coatings for pores and cracks with high voltage
• DIN 55671 Coating materials and binders for coating materials - Foil method for rapid determination of the content of non-volatile components
• DIN 55672 gel permeation chromatography (GPC)
  • Part 1 tetrahydrofuran (THF) as eluent
  • Part 2 N, N-dimethylacetamide (DMAC) as eluent
  • Part 3 water as eluant
• DIN 55673 Coating materials and their raw materials - Near infrared spectrometric analysis - General working principles
• DIN 55682 Solvents for coating materials - Determination of solvents in water-thinnable coating materials - Gas chromatographic method
• DIN 55683 Solvents for coating materials - Determination of the solvents in coating materials exclusively containing organic solvents - Gas chromatographic method
• DIN 55685 Solvents for coating materials - Alcohols - Gas chromatographic determination of the degree of purity
• DIN 55686 Solvents for coating materials - Acetic acid esters - Gas chromatographic determination of the degree of purity
• DIN 55687 Solvents for coating materials - Ketones - Gas chromatographic determination of the degree of purity
• DIN 55688 Solvents for coating materials - Ethylene glycol ether - Determination of the degree of purity by gas chromatography
• DIN 55689 Solvents for coating materials - Propylene glycol ether - Determination of the degree of purity by gas chromatography
• DIN 55699 processing of thermal insulation composite systems
• DIN 55802 machine tools; Swivel bending machines, acceptance conditions
• DIN 55803 machine tools; Pressing and leveling machines, acceptance conditions
• DIN 55900 coatings for space heaters
  • Part 1 Terms, requirements and testing for primer coatings industrially manufactured primers
  • Part 2 Terms, requirements and testing for topcoats and industrially manufactured pre-finishes
• DIN 55901 Drying agents for coating materials - Determination of the metal content of multi-metal drying agents
• DIN 55902 pigments - zinc chromate pigments, requirements and test methods
• DIN 55903 Pigments - Strontium chromate pigments, requirements and test methods
• DIN 55908 pigments - zinc white (zinc oxide) - analytical method
• DIN 55910 Pigments - Lithopone - Requirements and testing
• DIN 55912 pigments - titanium dioxide pigments
  • Part 2 analytical methods
    • Supplement 1 Example for the determination of secondary components using X-ray fluorescence analysis
    • Supplement 2 Creation of a calibration curve with the X-ray fluorescence analysis
• DIN 55913 pigments; Iron oxide pigments
  • Part 1 Technical delivery conditions
  • Part 2 analysis method
• DIN 55916 pigments; Red lead; Technical delivery conditions
• DIN 55923 pigments; Aluminum pigments and aluminum pigment pastes for paints; Technical delivery conditions
• DIN 55935 binders for lacquers, paints, adhesives and printing inks; Rosin; Requirements and testing
• DIN 55938 binders for coating materials - Lacquer soya oil - Requirements and testing
• DIN 55939 binders for coating materials - Castor oil - Requirements and testing
• DIN 55940 binders for coating materials - Castor oil - Requirements and testing
• DIN 55943 colorants - terms , replaced by DIN ISO 18451-1
• DIN 55944 colorants - classification according to coloristic and chemical aspects , replaced by DIN ISO 18451-2
• DIN 55945 Coating materials and coatings - Additional terms for DIN EN ISO 4618
• DIN 55950 binders for coating materials - abbreviations
• DIN 55952 binders for paints; Cellulose ethers; exam
• DIN 55953 binders for paints; Cellulose esters of organic acids; exam
• DIN 55957 binders for coating materials - methylation and silylation of fatty acids and gas chromatographic analysis
• DIN 55967 raw materials for coating materials - glycerine - requirements and testing
• DIN 55968 Pigments - Industrially produced pigment blacks (lamp black, furnace black, gas black) - Requirements and test methods
• DIN 55977 testing of dyes; Determination of the proportion that is sparingly soluble in solvents
• DIN 55978 testing of dyes; Determination of the relative color strength in solutions; Spectrophotometric method
• DIN 55979 testing of pigments; Determination of the black number of pigment carbon blacks
• DIN 55980 Determination of the color cast of almost white samples
• DIN 55981 Determination of the relative color cast of almost white samples
• DIN 55982 testing of pigments; Determination of the lightening power of white pigments, paste process
  • Supplement 1 Example of implementation using the gray paste process
• DIN 55983 testing of pigments; Comparison of the color of white pigments in Purton systems , rule setter recommends using DIN 55985, DIN EN ISO 787-25
• DIN 55984 testing of pigments; Determination of an opacity value of white and light gray media
  • Supplement 1 Example for the implementation of a process with a white alkyd resin paint
  • Supplement 2 Example for carrying out the process with a plasticized polyvinyl chloride (PVC-P) film
• DIN 55985 testing of pigments
  • Part 1 Comparison of the color of colored pigments in pure tone systems
  • Part 2 Comparison of the color of pigments in pure tone systems; Black pigments
• DIN 55986 testing of pigments; Determination of the relative color strength and the residual color distance in white highlights; Colorimetric method
• DIN 55987 testing of pigments; Determination of a hiding power value of pigmented media; Colorimetric method
• DIN 55988 Determination of the transparency number (glaze) of pigmented and unpigmented systems; Colorimetric methods
• DIN 55991 Coating materials - Coatings for nuclear systems
  • Part 1 requirements and test methods
  • Part 2 Identity check of coating materials
  • Part 3 Planning and execution of coating work
• DIN 55992 Determination of a measure for the generation of dust by pigments and fillers
  • Part 1 rotation process
  • Part 2 fall method
• DIN 55996 Coating materials - Testing the stone chip resistance of coatings
  • Part 1: Multi-impact test, replaced by DIN EN ISO 20567-1
• DIN 55997 Solvents for coating materials - DI water - Requirements and testing
  • Correction 1
• DIN 55998 solvents for coating materials - propylene glycol ether - delivery specification, further properties and testing
• DIN 55999 solvents for coating materials - ethylene glycol ether - delivery specification, further properties and testing
• DIN 56905 event technology, stage lighting - two-pole stage connectors 63 A, ~ 250 V, 50/60 Hz
• DIN 56912 show lasers and show laser systems - safety requirements and testing
• DIN 56920 theater technology
  • Part 1 Terms for theater and stage types
  • Part 2 terms for theater buildings
  • Part 3 Terms for stage equipment
  • Part 4 Terms for lighting equipment
  • Part 5 Terms for electrical installations
• DIN 56921 theater technology, stage machinery - prospectus trains
  • Part 1 hand counter-hoists with a load capacity of up to 500 kg
• DIN 56922 Theater technology, stage operation; Theater drill (stage drill)
• DIN 56923 Theater technology, stage operation; Hammered plug-in hinges
• DIN 56924 booths for simultaneous transmission
  • Part 1 stationary
  • Part 2 transportable
• DIN 56926 theater technology, stage operation - quick connector with union nut - dimensions, requirements and testing , replaced by DIN 56927
• DIN 56927 theater technology, stage operation - safety rope for objects to be secured up to 60 kg dead weight - dimensions, safety requirements and testing
• DIN 56928 Event technology - Technical ceilings - Safety requirements
• DIN 56930 stage technology - stage lighting systems
  • Part 1 terms, requirements
  • Part 2 control signals
  • Part 3 Terms and requirements for the networking of lighting control systems via EtherNet
• DIN 56932 Theater technology, stage lighting; Labeling plates for lights for emergency lighting
• DIN 56938 event technology - offset flap - general design features
• DIN 56950 event technology - mechanical equipment
  • Part 1 Safety requirements and testing
  • Part 2 Safety requirements for movable lamp hangers
  • Part 3 Safety requirements for tripods and truss lifts
  • Part 4 Safety requirements for prefabricated projection walls
• DIN 56955 event technology - load assumptions in stages and ancillary areas - traffic loads
• DIN 57100 Construction of high voltage systems with nominal voltages up to 1000 V.
  • Supplement 1 Development of the installation regulations
  • Supplement 3 Structure of the series of standards
  • Part 724 electrical systems in furniture and similar furnishings, e.g. B. Curtain strips, decorative panels [VDE regulation]
• DIN 57131 Construction and operation of electric fence systems [VDE regulation]
• DIN 57220
  • Part 3 VDE regulation for single and multiple cable clamps with insulating parts in high-voltage cable systems up to 1000 V.
• DIN 57250 insulated power lines
  • Part 1 General specifications [VDE regulation]
  • Part 106 ETFE core cable [VDE regulation]
  • Part 206 PVC sheathed cable with suspension rope [VDE regulation]
  • Part 212 Shielded PVC cable U₀ / U 3.6 / 6 kV [VDE regulation]
• DIN 57279 cable sets for underground mining; Sockets U₀ / U = 0.6 / 1 kV [VDE regulation]
• DIN 57472 testing on cables and insulated lines
  • Part 505 loss factor, dielectric loss figure and derivation [VDE regulation]
  • Part 506 couplings [VDE regulation]
  • Part 507 reduction factor [VDE regulation]
  • Part 619 notch force [VDE regulation]
  • Part 621 crystallite melting point [VDE determination]
  • Part 623 elongation at break of the copper conductor [VDE regulation]
  • Part 625 tensile and elongation behavior of strain relief elements [VDE regulation]
  • Part 626 tear length [VDE regulation]
  • Part 808 Tinability, solderability and soldering shrinkage [VDE regulation]
  • Part 812 freedom from pores of metallic coatings [VDE regulation]
• DIN 57510 VDE regulation for accumulators and battery systems
• DIN 57532 transformers and reactors
  • Part 21 starting transformers and starting reactors [VDE regulation]
• DIN 57544 welding equipment and equipment for arc welding and related processes
  • Part 100 Safety specifications for operation [VDE regulation]
  • Part 101 Establishment [VDE regulation]
• DIN 57635 low voltage fuses; D-fuses E 16 to 25 A, 500 V; D fuses up to 100 A, 750 V; D fuses up to 100 A, 500 V [VDE regulation]
• DIN 57638 low-voltage switchgear; Switch fuse units; DO system [VDE regulation]
• DIN 57669 insulators for electric fence systems [VDE regulation]
• DIN 57680
  • Part 3 VDE regulation for body protection equipment, protective devices and devices for working on live equipment up to 1000 V; Operating rods
  • Part 4 Body protection equipment, protective devices and devices for working on live parts up to 1000 V; NH fuse handles [VDE regulation]
  • Part 6 VDE regulation for protective clothing, protective devices and devices for working on live equipment up to 1000 V; Single pole voltage tester up to 250 V alternating voltage
  • Part 7 Body protection equipment, protective devices and devices for working on live parts up to 1000 V; Passport insert key [VDE regulation]
• DIN 57700 Safety of electrical devices for household use and similar purposes
  • Part 209 devices for playing and learning [VDE regulation]
  • Part 245 fog machines [VDE regulation]
• DIN 57710 lights with operating voltages below 1000 V.
  • Part 13 Ball-proof lights [VDE regulation]
  • Part 14 lights for installation in furniture [VDE regulation]
• DIN 57814 cords for telecommunication systems and information processing systems [VDE regulation]
• DIN 57818 Self-supporting telecommunication overhead cables on overhead power lines over 1 kV [VDE regulation]
• DIN 57850 coupling devices for carrier frequency message transmission over high voltage lines (TFH systems) [VDE regulation]
• DIN 57873 Measures against radio interference from systems of electricity supply and electric railways
  • Part 1 Radio interference from systems from 10 kV nominal voltage [VDE guideline]
  • Part 2 Radio interference from systems below 10 kV nominal voltage and from electrical railways [VDE regulation]
• DIN 57891 Use of cables and insulated lines for telecommunication systems and information processing systems
  • Part 4 Special guideline for cords according to DIN 57814 / VDE 0814 [VDE guideline]
  • Part 7 Special guidelines for cables with stranded conductors for increased mechanical stress for telecommunication systems and information processing systems according to DIN 57817 / VDE 0817 [VDE guideline]
  • Part 8 Special guideline for self-supporting telecommunication overhead cables on overhead power lines over 1 kV according to DIN 57818 / VDE 0818 [VDE guideline]
• DIN 58002 Integrated Optics - Near-field measurement method for single-mode optical chip components
• DIN 58121 teaching, learning and training materials; Glassware and connectors
• DIN 58122 sizes, units, symbols; Overview for the lesson
  • Supplement 1 Explanations for the lesson
• DIN 58123 teaching, learning and training materials; Tools; Stand rods, sleeves, feet and table clamps
• DIN 58124 school bags - requirements and testing
• DIN 58125 School building - Structural requirements for the prevention of accidents
• DIN 58131 Optical volume filters; Text in German and English
• DIN 58133 Medical compression stockings
• DIN 58140 fiber optics
  • Part 1 Terms, symbols; Text in German and English
  • Part 2 Classification of fiber optic products; Text in German and English
• DIN 58141 measurement of fiber optic elements
  • Part 1 Determination of the attenuation of optical fibers; Text in German and English
  • Part 2 Determination of the spectral transmittance of light guides; Text in German and English
  • Part 3 Determination of the effective opening angle of light guides; Text in German and English
  • Part 4 Determination of diameters and thicknesses of optical fibers; Text in German and English
  • Part 5 Measurement of fiber optic elements - Part 5: Determination of the visible defects of light and image guides; Text in German and English
  • Part 6 Determination of the mechanical bending radius for short-term applications of optical fibers; Text in German and English
  • Part 7 Determination of the tensile strength of fiber optic cables; Text in German and English
  • Part 8 Determination of the mechanical bending radius for short-term applications of fiber optic cables; Text in German and English
  • Part 9 Determination of the deviation from roundness and concentricity of optical fibers; Text in German and English
  • Part 10 Determination of the illuminance and the effective opening angle of cold light sources; Text in German and English
  • Part 11 Determination of the photometric properties of laterally radiating light guides; Text in German and English
• DIN 58143 data sheet information for fiber optic products
  • Part 1 optical fibers; Text in German and English
  • Part 2 Flexible light guides; Text in German and English
  • Part 3 Flexible image guides; Text in German and English
  • Part 4 fiber bundle; Text in German and English
  • Part 5 cold light sources; Text in German and English
  • Part 6 fiber optic cable; Text in German and English
• DIN 58145 Measurement method for determining the solarization of optical fibers made of quartz glass; Text in German and English
• DIN 58161 testing of optical components
  • Part 1 plan sample glasses
  • Part 2 radius test glasses
  • Part 3 Determination of radii of curvature with the ring spherometer
  • Part 4 diffusers
• DIN 58172 testing of optical systems
  • Part 1 symmetry deviations
• DIN 58175 Lasers and laser systems - Determination of the properties of ultra-short laser pulses
  • Part 1 Basics; Text in German and English
  • Part 2 autocorrelation measurement method; Text in German and English
• DIN 58186 Quality assessment of optical systems; Determination of the false light
• DIN 58188 Quality assessment of optical systems - Determination of the relative irradiance in the image field
• DIN 58189 basic standards of optics - determination of the focal length
• DIN 58197 Thin layers for the optics
  • Part 1 Minimum requirements for anti-reflection layers; Text in German and English
  • Part 2 minimum requirements for reflection-increasing layers (metal layers); Text in German and English
  • Part 3 minimum requirements for neutral divider layers; Text in German and English
  • Part 4 Minimum requirements for layers for laser applications; Text in German and English
• DIN 58208 ophthalmic optics - terms and symbols for spectacle lenses in connection with the human eye
• DIN 58214 eye protection devices - protective hoods - terms, forms and safety requirements
• DIN 58220 visual acuity determination
  • Part 3 examination for expert opinion
  • Part 5 General eye test (used for occupational medical examinations according to the employer's liability insurance association principles G 25, G 26 and G 37)
  • Part 6 traffic-related eye test
  • Part 7 Mesopic contrast vision , without and with glare, for road traffic-related testing (draft)
• DIN 58230 Medical Instruments - Amputation Knife
• DIN 58231 Medical instruments - Halstead artery clamps
• DIN 58232 Medical instruments - artery clamps according to Kocher and Kocher-Ochsner
• DIN 58233 Medical instruments - arterial clamps according to Overholt-Geißendörfer
• DIN 58234 Medical Instruments - Rochester-Pean artery clamps
• DIN 58235 Medical instruments - Mayo-Hegar needle holder
  • Part 1 Without carbide inserts
  • Part 2 with hard metal inserts
• DIN 58236 Medical instruments - needle holder according to Mathieu
  • Part 1 Without carbide inserts
  • Part 2 With hard metal inserts
• DIN 58237 Medical instruments - splinter forceps according to Feilchenfeld
• DIN 58238 medical instruments
  • Part 1 anatomical forceps, straight
  • Part 2 curved
• DIN 58239 Medical instruments - Surgical forceps
  • Part 1 straight
  • Part 2 curved
• DIN 58240 Medical Instruments - Retractors to Israel
• DIN 58241 Medical instruments - Arterial clamps according to Crile
• DIN 58242 Medical instruments - Arterial forceps according to Dandy
• DIN 58243 Medical instruments - Kocher bowel clamps
• DIN 58244 Medical instruments - intestinal clamps according to Mayo-Robson
• DIN 58245 Medical instruments - Cloth clips according to Backhaus
• DIN 58246 Medical instruments - Peritoneum clamp according to Mikulicz
• DIN 58247 Medical instruments - Roux retractors
• DIN 58248 Medical instruments - retractors according to Jansen
• DIN 58249 Medical instruments - Retractors according to Weitlaner
• DIN 58250 Medical instruments - surgical scalpels
• DIN 58251 Medical instruments - Bergmann scalpels
• DIN 58252 medical instruments
  • Part 1 Straight surgical scissors, without carbide inserts
• DIN 58253 medical instruments
  • Part 1 Bent up surgical scissors, without carbide inserts
• DIN 58254 Medical instruments - Incision scissors
• DIN 58255 Medical instruments - Gross dressing forceps
  • Part 1 straight
  • Part 2 bent up
• DIN 58256 Medical instruments - needle holder according to Tönnis
• DIN 58257 Medical instruments - Crile needle holder
• DIN 58259 Medical instruments - needle holder according to Masson
• DIN 58260 Medical instruments - Ligation needles according to Deschamps
• DIN 58262 Medical instruments - Jennings mouth gag
• DIN 58263 Medical Instruments - Heister mouth gag
• DIN 58264 Medical instruments - Finochietto rib lock
• DIN 58265 Medical instruments - needle holder according to Finochietto
• DIN 58266 Medical instruments - Crile-Wood needle holder
  • Part 1 Without carbide inserts
  • Part 2 With hard metal inserts
• DIN 58267 Medical instruments - needle holder according to Mathieu with internal lock
• DIN 58270 Medical instruments - Knee-bent forceps
• DIN 58271 Medical instruments - Bayonet-shaped forceps
• DIN 58272 Medical instruments - Fine forceps
• DIN 58273 Medical instruments - Fixation forceps
• DIN 58274 Medical instruments - Iris forceps
• DIN 58275 Medical instruments - Chalazion forceps
• DIN 58276 Medical instruments - Forceps according to Adson
• DIN 58277 Medical instruments - Wachenfeld wound clip forceps
• DIN 58278 Medical instruments - cilia forceps
• DIN 58279 Medical instruments - First aid kit scissors
• DIN 58280 Medical instruments - Iris scissors, without carbide inserts
• DIN 58281 medical instruments
  • Part 1 strabismus scissors, without carbide inserts
• DIN 58282 Medical instruments - Tenotomy scissors according to Stevens
• DIN 58285 Medical instruments - Volkmann retractors
• DIN 58286 Medical instruments - Kocher retractors
• DIN 58287 Medical instruments - Retractors according to Körte
• DIN 58288 Medical instruments - Langenbeck retractors
• DIN 58289 Medical instruments - Abdominal wall and liver hook according to Mikulicz with a curved blade
• DIN 58290 Medical instruments - Bergmann retractors
• DIN 58291 Medical Instruments - Retractors according to Simon and Martin
• DIN 58292 Medical instruments - Tracheal hook
• DIN 58293 Medical instruments - Tracheal hook according to Bose
• DIN 58294 Medical instruments - Desmarres eyelid holder
• DIN 58295 Medical instruments - Volkmann bone hook
• DIN 58296 Medical instruments - Raspatories according to Semb
• DIN 58297 Medical instruments - rib rasps according to Doyen
• DIN 58298 Medical instruments - Materials, execution and testing
  • Part 19 materials, execution and testing of medical instruments - trocars
  • Part 20 materials, execution and testing of medical instruments - instruments for use with trocars according to DIN 58298-19
• DIN 58299 grooves for surgical instruments; Profile angles, divisions
• DIN 58300 types of closure for surgical instruments
• DIN 58312 Medical Instruments - Rib Contractor
• DIN 58313 Medical instruments - cotton swab, straight
• DIN 58314 Medical instruments - Larynx cotton wool carriers according to Fein
• DIN 58315 Medical instruments - Cushing retractors
• DIN 58316 Medical instruments - belly spatula, flexible
• DIN 58317 Medical instruments - Elevator according to Henke
• DIN 58318 Medical Instruments - Elevators according to Langenbeck
• DIN 58319 Medical Instruments - Williger Elevator
• DIN 58320 orthopedic technology; Orthopedic-technical remedies and aids
  • Part 1 overview, classification
  • Part 2 names and individual parts of leg prostheses
• DIN 58324 orthopedic technology; Stock buffer
• DIN 58345 refrigerators for pharmaceuticals - terms, requirements, testing
• DIN 58355 membrane filter
  • Part 1 Testing of the specific flow rate of liquids for flat filters
  • Part 2 testing of bladder pressure
  • Part 3 Bacteria retention capacity for flat filters - Requirements and testing
  • Part 4 test for particle release
  • Part 6 Testing for extractable components
• DIN 58356 membrane filter elements
  • Part 1 Requirements and testing of the bacterial retention capacity
  • Part 2 pressure holding test
  • Part 3 Testing the specific flow rate of liquids
  • Part 7 Testing of sterilizability in flowing steam
  • Part 8 Testing the sterilizability with steam
  • Part 9 testing for endotoxins
  • Part 10 Determination of the non-volatile extractable components - limit concentration in the filtrate stream
  • Part 11 Determination of the non-volatile extractable components by means of immersion methods
  • Part 12 Integrity testing of hydrophobic membrane filter elements with water
• DIN 58369 Transfusion, Infusion - Disposable suspension device for transfusion bottles and infusion bottles - Requirements, testing
• DIN 58371 blood bank refrigerators - Terms, requirements, testing
• DIN 58375 plasma storage facilities - terms, requirements, testing
• DIN 58395 Temperature ranges of application of lubricants for precision mechanical optical devices
• DIN 58396 lubricating greases for precision mechanical optical devices
  • Part 2 minimum requirements
• DIN 58397 optics production - testing of lubricating greases for precision mechanical optical devices
  • Part 1 Loss of Evaporation
  • Part 2 spreading behavior
• DIN 58400 reference profile for involute gears on spur gears for precision engineering
• DIN 58405 spur gears of precision engineering
  • Part 1 scope, terms, determinants, classification
  • Part 2 gearbox fit selection, tolerances, dimensions
  • Part 3 Information in drawings, calculation examples
  • Part 4 tables
• DIN 58411 hobs for spur gears in precision engineering with module 0.1 to 1 mm
• DIN 58412 reference profiles for gear cutting tools in precision engineering; Involute toothing according to DIN 58400 and DIN 867
• DIN 58413 tolerances for hobs in precision engineering
• DIN 58420 master gears for testing spur gears in precision engineering; Wheel center and toothing
• DIN 58425 circular arc gears for precision engineering
  • Part 1 overview, abbreviations, terms
  • Part 2 tooth profile
  • Part 3 Calculation and construction of wheel and drive
  • Part 4 Permissible deviations and tolerances for wheel and drive
  • Part 5 profile for tooth form milling cutters
  • Part 6 information in drawings
  • Part 7 tables, diagrams
• DIN 58450 oval head screws with slot; Scale screws
• DIN 58460 shoulder bolts for precision engineering
• DIN 58461 shoulder bolt with collar, for precision engineering
• DIN 58462 shoulder bolt with groove, for precision engineering
• DIN 58463 shoulder bolt with collar and groove, for precision engineering
• DIN 58464 shoulder bolts with head, for precision engineering
• DIN 58466 dimension plan for parts of precision engineering
• DIN 58467 sockets with smooth spigot, for precision engineering
• DIN 58469 shoulder bolts with thread, for precision engineering
• DIN 58470 shoulder bolts with hexagon and thread, for precision engineering
• DIN 58471 shoulder bolts with hexagon, thread and groove, for precision engineering
• DIN 58472 shoulder bolts with head and thread, for precision engineering
• DIN 58500 names of drawing tools
• DIN 58502 drawing tools; Requirements, testing
• DIN 58505 compass for precision drawing tools (P)
• DIN 58506 dividers for precision drawing tools (P)
• DIN 58507 insert dividers for precision drawing tools (P)
• DIN 58508 compass for precision drawing tools (P)
• DIN 58509 case zero compass for precision drawing tools (P)
• DIN 58510 graphite lead inserts for precision drawing tools (P)
• DIN 58511 drawing pen inserts for precision drawing tools (P)
• DIN 58512 point inserts for precision drawing tools (P)
• DIN 58513 extension rod for precision drawing tools (P)
• DIN 58515 needles for drawing tools
• DIN 58516 drop pins for drawing tools
• DIN 58518 drawing springs for precision drawing tools (P)
• DIN 58519 drawing springs, Swedish shape, for precision drawing tools (P)
• DIN 58520 screws for drawing tools
  • Part 1 T-bolts
  • Part 2 countersunk countersunk screws
• DIN 58521 knurled nuts for drawing tools
• DIN 58522 graphite leads for drawing tools
• DIN 58530 adjusting screws for drawing tools
• DIN 58531 clamping screws for drawing tools
• DIN 58532 drawing tools - extension rod for large use dividers
• DIN 58537 drawing tools; Reduction circle
• DIN 58538 drawing tools; Large sub-circle and large deployment sub-circle
• DIN 58540 compass for standard drawing tools (S)
• DIN 58541 dividers for standard drawing tools (S)
• DIN 58542 reversible dividers for standard drawing tools (S)
• DIN 58543 compass for school drawing tools (S)
• DIN 58544 zero circle for standard drawing tools (S)
• DIN 58545 inserts for graphite leads or needles for standard drawing tools (S)
• DIN 58546 drawing spring inserts for standard drawing tools (S)
• DIN 58548 extension bar for standard drawing tools (S)
• DIN 58551 central drives for drawing tools
• DIN 58552 threaded sockets for drawing tools
• DIN 58553 needle holder for drawing tools
• DIN 58556 quick adjustment compass and insert quick adjustment compass
• DIN 58600 breathing apparatus - plug-in connection between the regulator for compressed air breathing apparatus in positive pressure design and the breathing connection for the German fire services
• DIN 58610 respiratory protection devices - full face masks combined with head protection for use as part of a breathing apparatus for the fire service
• DIN 58620 Respiratory protective devices - Gas filters and combination filters for protection against carbon monoxide - Requirements, testing, labeling
• DIN 58621 Respiratory protective devices - Reactor filters for protection against radioactive methyl iodide and radioactive particles - Requirements, testing, labeling
• DIN 58629 Optics and optical instruments - terms for microscopy
  • Part 1 light microscopy
• DIN 58639 Respiratory protection devices for self-rescue - Isolation devices with oxygen with hood for self-rescue - Requirements, testing, marking
• DIN 58647 breathing apparatus for self-rescue
  • Part 7 escape filter devices; Requirements, testing, labeling
• DIN 58651 respiratory protection devices - regeneration devices
  • Part 2 Short-term pressure oxygen protection devices for light work; Requirements, testing, labeling
• DIN 58652 respiratory protection devices - regeneration devices
  • Part 1 Short-term chemical oxygen (KO2) protection devices for light work; Requirements, testing, labeling
  • Part 2 Chemical oxygen (KO2) protective devices for work and rescue; Requirements, testing, labeling
  • Part 3 Short-term chemical oxygen (NaClO3) protective devices for light work; Requirements, testing, labeling
  • Part 4 Chemical oxygen (NaClO3) protective devices for work and rescue; Requirements, testing, labeling
• DIN 58653 Meteorological devices - Minimum thermometer
• DIN 58654 Meteorological devices - Maximum thermometer
• DIN 58655 Meteorological devices - Soil thermometer 20 to 310 mm
• DIN 58660 Meteorological devices - Thermometer 370 for psychrometers
• DIN 58661 Meteorological devices - Thermometer 280 for psychrometers
• DIN 58664 Meteorological devices - Soil depth thermometer, 500 mm and 1000 mm
• DIN 58681 jewelry label
  • Part 1 label for serial jewelry
    • Supplement 1 Example of a label data record
• DIN 58682 gold plating for jewelry; Terms, labeling
• DIN 58700 ISO fits; Tolerance field selection for precision engineering
  • Part 1 tolerance zones, nominal dimensions
  • Part 2 Recommended fits
• DIN 58722 optics production - terms of optics production
  • Part 1 working procedure
  • Part 2 resources
• DIN 58723 Optics production - Diamond-studded faceting tools
• DIN 58724 optics production - spherometer - measuring rings
• DIN 58725 optics production - threaded connections with fitting approach
• DIN 58726 optics production - threaded connections without fitting approach
• DIN 58727 optics production - ball pins for optics machines
  • Part 1 Without carbide insert
  • Part 2 with spherical carbide insert
  • Part 3 with a cylindrical hard metal insert
• DIN 58729 optics production - ball sockets
• DIN 58735 optics production - magazine plate
• DIN 58736 optics production - centering bells
  • Part 1 with connecting thread
  • Part 2 With connecting cylinder 30 mm and 46 mm for internal clamping
  • Part 3 With connecting cylinder 12 mm and 25 mm for external clamping
• DIN 58737 optics production - centering spindles
  • Part 1 centering spindles with connecting thread; Not for new designs
  • Part 2 centering spindles with clamping cylinder
• DIN 58739 optics production - clamping devices for optics
  • Part 1 vacuum recordings
  • Part 2 workpiece holders with membranes
  • Part 3 collets for single lenses
  • Part 6 pieces of precision cement with connecting cylinder 25 mm
• DIN 58740 optics production - grinding spindles
  • Part 2 grinding spindles with clamping cylinders
  • Part 3 HSK connection
• DIN 58741 optics production - diamond-set cup wheels
  • Supplement 1 overview
  • Part 1 with steep taper
  • Part 2 With connecting cylinder
  • Part 4 combination tools
  • Part 5 With galvanic assignment
  • Part 6 Multi-part grinding tools
  • Part 7 Combinable form grinding wheels
  • Part 8 With HSK connection
• DIN 58742 optics production - diamond-studded centering and profile disks
• DIN 58743 optics production - diamond-studded cutting and shaping disks
• DIN 58744 optics production - diamond-studded drill bits
  • Part 1 with connecting thread
  • Part 2 With connecting cylinder
  • Part 3 With connection thread outside
• DIN 58747 optics production - ultrasonic cleaning systems
  • Part 1 area dimensions for tubs
  • Part 2 cleaning racks, rigid form
  • Part 4 handles for cleaning racks
• DIN 58750 optics production - testing of polishing agents for optics
  • Part 1 Physical and colloid chemical properties
  • Part 3 Material removal value and surface quality in precision optics
  • Part 4 polishing agent qualification
• DIN 58751 optics production - Loose abrasives for optics
  • Part 1 requirements
  • Part 2 test method
• DIN 58752 optics production - cleaning agents for optics - terms and requirements
• DIN 58753 fine putty for the optics
  • Part 1 classification and requirements
  • Part 2 exam
• DIN 58754 optics production - indexing for hydraulic expansion chucks
• DIN 58756 optics production - small lenses
  • Part 1 support body and auxiliary putty pieces
  • Part 2 support body extensions and membranes
• DIN 58759 optics production - workpiece carriers for flat support bodies
• DIN 58760 optics production; Support body with interior mount
• DIN 58761 optics production; Support body with external mount
• DIN 58762 optics production - sintered diamond grinding media
  • Part 1 grinding lips for cup wheels - dimensions
  • Part 2 pellets and mounted points
• DIN 58763 optics production - transport box for lens production in prescription workshops
• DIN 58764 optics production - connection dimensions for transport aids and handling systems
• DIN 58765 optics production - packaging - requirements
• DIN 58766 optics production - connection dimensions for block pieces for spectacle lens production - diameter 43 mm
• DIN 58767 optics production - cylindrical tool and workpiece carrier connection
• DIN 58768 optics production - input parameters for CNC-controlled machine tools
• DIN 58770 optics production - climatic requirements for rooms
• DIN 58771 optics production - connection dimensions for polishing tool adapters
• DIN 58783 Medical instruments - Buck ear curettes
• DIN 58785 Medical instruments - Hartmann specula
• DIN 58788 Medical instruments - Hartmann-Halle nasal specula
• DIN 58794 Medical instruments - ear forceps
• DIN 58795 Medical instruments - Mouth gag - Connection dimensions for slide rail and tongue depressor
• DIN 58801 Surgical Implants; Bone marrow nails according to Küntscher
• DIN 58802 instruments for intramedullary nailing
  • Part 1 guide spikes, drive spikes
  • Part 2 guide spikes, drill spikes
• DIN 58803 instruments for intramedullary nailing; Drill and nail gauge
• DIN 58804 instruments for intramedullary nailing
  • Part 2 impact instruments, ready-made clubs
• DIN 58805 instruments for intramedullary nailing
  • Part 1 extraction hook with connecting thread
• DIN 58806 instruments for intramedullary nailing; Nail catcher
• DIN 58807 instruments for intramedullary nailing; Rascal
• DIN 58808 instruments for intramedullary nailing; Pilot drill
• DIN 58809 instruments for intramedullary nailing; Flexible drill
• DIN 58845 Medical Instruments - Hohmann Bone Lever
• DIN 58846 Medical Instruments - Raspatories
• DIN 58847 Medical Instruments - Bone Holding Forceps according to Verbrugge
• DIN 58849 Medical instruments - Scalpel handles for exchangeable blades
  • Part 2 handles
• DIN 58852 Medical instruments - button probes
• DIN 58853 Medical instruments - eye probes
• DIN 58854 Medical instruments - Myrtle leaf probes
• DIN 58855 Medical instruments - Kirschner hollow probe
• DIN 58856 Medical instruments - Gallstone probes according to Desjardins
• DIN 58857 Medical instruments - hollow probes
• DIN 58858 Medical instruments - König hollow probe
• DIN 58859 Medical instruments - Tönnis dissector, double-ended
• DIN 58860 Medical instruments - Lexer chisels
• DIN 58861 Medical instruments - Flat chisels according to Lambotte
• DIN 58863 Medical instruments - Volkmann resection spoon
• DIN 58864 Medical instruments - resection spoons according to Simon, Schröder and Halle
• DIN 58865 Medical instruments - Langenbeck resection knife
• DIN 58866 Medical instruments - Nose knife according to Ballenger
• DIN 58901 Hemostaseology - Determination of factor VII coagulation activity (F VII C)
  • Part 1 Reference measurement method for the one-step method
  • Part 2 reference measurement method with a synthetic peptide substrate
• DIN 58902 Hemostaseology - Reference measuring method for determining the Batroxobin time
• DIN 58903 Hemostaseology - Deficient plasma - Requirements, production
• DIN 58904 Hemostaseology - Determination of protein C activity - Reference method with a chromogenic peptide substrate
• DIN 58905 hemostaseology - blood sampling
  • Part 1 Obtaining venous citrated plasma for hemostaseological analyzes; Text in German and English
• DIN 58906 Hemostaseology - Determination of the fibrinogen concentration
  • Part 1 reference measuring method for the determination of coagulable fibrinogen according to Clauss
• DIN 58907 Hemostaseology - Determination of factor IX coagulation activity (F IX C)
  • Part 1 Reference measurement method for the one-step method
• DIN 58908 Hemostaseology - Determination of the activated partial thromboplastin time (APTT) - Reference method; Text in German and English
• DIN 58909 haemostaseology - determination of factor VIII coagulation activity (F VIII C)
  • Part 1 Reference measurement method for the one-step method
  • Part 2 reference measurement method with a synthetic peptide substrate
• DIN 58910 Hemostaseology - Thromboplastin time determination
  • Part 1 Reference measuring method for the determination in venous citrated plasma; Text in German and English
  • Part 2 Reference measuring method for the determination in venous citrated blood
  • Part 3 reference measuring method for the determination in capillary citrate blood
  • Part 4 Reference measuring method for the determination in capillary whole blood
• DIN 58911 hemostaseology - calibration of measuring methods
  • Part 1 coagulation time measuring method
  • Part 2 Photometric measuring methods
• DIN 58912 Hemostaseology - Determination of antithrombin activity
  • Part 1 reference measurement method with a synthetic peptide substrate
• DIN 58913 Hemostaseology - Determination of factor II coagulation activity (F II C) and factor X coagulation activity (FXC)
  • Part 1 Reference measurement method for the one-step method
• DIN 58914 Hemostaseology - Thrombin time determination
  • Part 1 Reference measuring method for the determination in venous citrated plasma
• DIN 58916 Medical blood lancets - Types of grinding, requirements and testing
• DIN 58921 test method for the verification of the suitability of a medical device simulator for steam sterilization - medical device simulator test; Text in German and English
• DIN 58923 Hemostaseology - Reference method for determining the ristocetin cofactor activity of the VWF; Text in German and English
• DIN 58924 Hemostaseology - Reference method for determining the collagen binding activity of the VWF; Text in German and English
• DIN 58930 Hemostaseology - INR calibration plasmas - Requirements, manufacture, application
• DIN 58931 Hematology - Determination of the hemoglobin concentration in the blood - Reference method; Text in German and English
• DIN 58932 hematology - Determination of the blood cell concentration in the blood
  • Part 1 blood collection, sample preparation, influencing variables, disruptive factors; Text in German and English
  • Part 2 characteristic quantities for erythrocytes (erythrocyte indices)
  • Part 3 reference method for determining the concentration of erythrocytes; Text in German and English
  • Part 4 reference method for determining the concentration of leukocytes
  • Part 5 Reference method for determining the concentration of platelets; Text in German and English
• DIN 58933 hematology - Determination of the volume fraction of erythrocytes in the blood
  • Part 1 centrifugation method as reference method
• DIN 58934 hematology - control materials for the blood count
  • Part 1 control blood
• DIN 58935 hematology - determination of the erythrocyte sedimentation rate in the blood
  • Part 1 Selected Method
• DIN 58936 quality management in laboratory medicine
  • Part 1 basic terms
  • Part 2 Terms for the quality and application of examination procedures
• DIN 58939 hemostaseology - reference plasma
  • Part 1 requirements, manufacture
• DIN 58940 Medical microbiology - Sensitivity testing of microbial pathogens against chemotherapeutic agents
  • Part 1 terms
  • Part 2 drug carrier for the agar diffusion test; Text in German and English
  • Part 3 agar diffusion test; Text in German and English
  • Part 4 evaluation levels for the minimum inhibitory concentration
  • Part 6 Determination of the minimum inhibitory concentration (MIC) using the agar dilution method; Text in German and English
  • Part 7 Determination of the minimum bactericidal concentration (MBK) with the microbouillon dilution method; Text in German and English
  • Part 9 regression analysis for the correlation of inhibitory zone diameter (HHD) and minimum inhibitory concentration (MIC); Text in German and English
  • Part 10 criteria for evaluating the in vitro effectiveness of new chemotherapeutic agents
  • Part 20 coding of antibacterial agents
  • Part 31 Supplementary Methods for Susceptibility Testing; Text in German and English
  • Part 82 microdilution; Special requirements for the testing of demanding bacteria
  • Part 83 Microdilution; Special requirements for the testing of obligatory anaerobic bacteria
  • Part 84 microdilution; Special requirements for the testing of fungi against antifungal agents
• DIN 58942 Medical microbiology - culture media
  • Part 2 Ready-to-use blood culture systems
  • Part 3 Immersion culture systems for microbiological urine testing
  • Part 4 Transport systems for specimens containing bacteria
    • Supplement 1 Systems, media and conditions for the transport of selected pathogens in clinical examination material
  • Part 5 Requirements and selection of culture media for stool diagnostics
    • Beiblatt 1 Principles of staged stool examination and overview of culture media for routine use
  • Part 6 Solid Chromogenic Culture Media; Text in German and English
• DIN 58943 Medical microbiology - tuberculosis diagnostics
  • Supplement 1 Guide for a differentiated use of the detection methods
  • Part 3 Cultural methods for the detection of mycobacteria; Text in German and English
  • Part 4 Primary Samples for Tuberculosis and Mycobatitis Diagnostics - Qualitative and Quantitative Requirements, Collection, Transport and Storage; Text in German and English
    • Supplement 1 Prevention of contamination of patient samples with mycobacteria during processing in the laboratory; Text in German and English
  • Part 5 Molecular biological identification and differentiation of tuberculosis bacteria; Text in German and English
  • Part 8 Susceptibility testing of tuberculosis bacteria to chemotherapeutic agents; Text in German and English
  • Part 9 Phenotypic differentiation of tuberculosis bacteria; Text in German and English
  • Part 32 Microscopic methods for the detection of mycobacteria; Text in German and English
• DIN 58946 sterilization - steam sterilizers
  • Part 7 structural requirements as well as requirements for the equipment and operation of steam sterilizers in the health sector
• DIN 58948 sterilization - low temperature sterilizers
  • Part 7 Structural requirements and requirements for the equipment and the operation of ethylene oxide sterilizers
  • Part 17 Structural requirements and requirements for the equipment as well as the operation of low-temperature steam-formaldehyde sterilizers
• DIN 58949 disinfection - steam disinfection apparatus
  • Part 2 requirements; Text in German and English
  • Part 3 testing for effectiveness
  • Part 4 Biological indicators for testing effectiveness
  • Part 6 Operation of steam disinfection devices, their structural requirements and supply of operating resources
• DIN 58950 Sterilization - Steam sterilizers for pharmaceutical items to be sterilized
  • Part 1 terms; Text in German and English
  • Part 2 device requirements; Text in German and English
  • Part 3 exams; Text in German and English
  • Part 6 operation; Text in German and English
  • Part 7 Requirements for the equipment and structural requirements; Text in German and English
• DIN 58951 Sterilization - Steam sterilizers for laboratory items to be sterilized
  • Part 2 device requirements, structural requirements and requirements for the equipment
• DIN 58952 Sterilization - Transport baskets for sterile barrier systems
  • Part 2 sterilizing baskets made of metal
  • Part 3 sterilization trays for sterilization items made of metal
• DIN 58953 sterilization - supply of sterile goods
  • Part 1 terms
  • Part 6 Testing of the impermeability to germs of packaging materials for medical devices to be sterilized
  • Part 7 Application technology of sterilization paper, nonwovens, woven textile materials, paper bags and sealable transparent bags and tubes
  • Part 8 logistics of sterile medical devices
  • Part 9 application technology of sterilization containers
• DIN 58956 Medical Microbiology; Medical-microbiological laboratories
  • Part 2 Requirements for the equipment
  • Part 3 Requirements for the organizational plan
  • Part 10 safety signs
• DIN 58959 quality management in medical microbiology
  • Part 1 requirements for the QM system
  • Part 2 Requirements for sampling, transport and acceptance of test material
  • Part 3 Requirements for the examination order and findings report
  • Part 4 Requirements for light microscopic examinations
  • Part 6 requirements for control strains
    • Supplement 1 Examples for the production and storage of bacteria as stock and utility cultures
  • Part 7 General requirements for carrying control strains
    • Supplement 1 Sources of Supply for Control Strains
  • Part 8 Requirements for the use of control strains for testing swabs, transport, immersion and blood culture media
  • Part 9 Requirements for the use of control strains for testing culture media
  • Part 10 Requirements for the use of control strains for testing reagents, dyes and biological materials
  • Part 11 Requirements for the use of control material for testing ready-to-use tests and test kits
  • Part 12 requirements for the use of control material for testing immunological examination systems
  • Part 14 requirements for the use of control strains in susceptibility testing of aerobic bacteria
  • Part 15 Requirements for the use of control strains in susceptibility testing of anaerobic pathogens
  • Part 16 requirements for the use of control strains in susceptibility testing of special bacteria
  • Part 17 Requirements for the use of control strains in the investigation of mycobacteria; Text in German and English
  • Part 18 requirements for the use of control strains in the investigation of mycoplasma
  • Part 19 requirements for the use of control strains in the study of fungi
  • Part 20 requirements for the use of control material in the investigation of protozoa and more highly organized microorganisms
• DIN 58960 photometer for analytical investigations
  • Part 1 Used physical-chemical basic processes
  • Part 2 technical structure; Classification, components, terms
  • Part 3 Terms to identify the technical properties of absorption photometers
  • Part 4 Requirements for the description of technical data for the user
• DIN 58963 cuvettes for photometric measurements
  • Part 1 terms
  • Part 2 Precision Rectangular Cuvettes; Dimensions, requirements
  • Part 3 single-use rectangular cuvettes made of plastics; Dimensions, requirements
• DIN 58964 Ensuring the quality of POCT results - evaluation criteria for comparative measurements during implementation
• DIN 58970 laboratory centrifuges
  • Part 1 Terms, testing, labeling
  • Part 2 centrifuge tubes for RZB up to 4000
• DIN 59145 spring steel, hot-rolled, with semicircular narrow sides ; January 2004 replaced by DIN EN 10092-1
• DIN 59146 spring steel, hot-rolled, with rectangular cross-section and rounded edges for leaf springs ; January 2004 replaced by DIN EN 10092-1
• DIN 58984 Special laboratory medicine; Determination of inorganic substances in serum, plasma, urine and other body fluids
  • Part 1 Determination of calcium using atomic absorption spectrometry (AAS)
• DIN 58985 Laboratory Medicine - Decision Limits
• DIN 58987 Hemostaseology - Reference method for determining the von Willebrand factor antigen; Text in German and English
• DIN 58988 Hemostaseology - Reference method for determining the von Willebrand factor multimers; Text in German and English
• DIN 59051 bar steel - hot-rolled sharp-edged T-steel - dimensions, dimensions, tolerances
• DIN 59200 flat products made of steel - Hot-rolled wide flat steel - Dimensions, mass, tolerances on dimensions, shape tolerances and deviations in the dimensions
• DIN 59220 flat products made of steel - Hot-rolled sheet metal with patterns - Dimensions, weights, tolerances on dimensions, shape tolerances and deviations in the dimensions
• DIN 59231 corrugated sheets and pan sheets, surface refined - dimensions, mass and static values
• DIN 59350 precision flat and square steel - dimensions, mass, permissible deviations
• DIN 59370 Bright isosceles, sharp-edged angle steel - dimensions, dimensions, limit dimensions and shape tolerances
• DIN 59410 hollow profiles for steel construction , hot-finished square and rectangular steel tubes, dimensions, weights, permissible deviations , December 1997 replaced by DIN EN 10210-2
• DIN 59411 hollow profiles for steel construction; Cold finished welded square and rectangular steel tubes; Dimensions, weights, permissible deviations , December 1997 replaced by DIN EN 10219-2
• DIN 59413 cold sections made of steel, permissible size, shape and weight deviations, December 2003 replaced by DIN EN 10162
• DIN 59610 Lead and lead alloys - Rolled sheets of lead for general use
• DIN 59740 Sheets made of nickel and wrought nickel alloys, hot-rolled - dimensions, limit dimensions and shape tolerances
• DIN 59742 blanks and rings made of nickel and wrought nickel alloys, hot-rolled - dimensions, limit dimensions and shape tolerances
• DIN 59745 Sheets made of nickel and wrought nickel alloys, cold-rolled - dimensions, limit dimensions and shape tolerances
• DIN 59746 strips and sheets made of straightened strip sections made of nickel and wrought nickel alloys, cold-rolled - dimensions, limit dimensions and shape tolerances
• DIN 59755 Pipes made of nickel and wrought nickel alloys, cold-finished; Dimensions, permissible deviations
• DIN 59760 round bars made of nickel and wrought nickel alloys, hot-rolled - dimensions, dimensional limits and shape tolerances
• DIN 59761 square bars made of nickel and wrought nickel alloys, hot-rolled - dimensions, limit dimensions and shape tolerances
• DIN 59763 rectangular bars made of nickel and wrought nickel alloys, hot-rolled - dimensions, limit dimensions and shape tolerances
• DIN 59765 Round rods made of nickel and wrought nickel alloys, drawn - dimensions, limit dimensions and shape tolerances
• DIN 59766 square bars made of nickel and wrought nickel alloys, drawn - dimensions, limit dimensions and shape tolerances
• DIN 59767 hexagonal bars made of nickel and wrought nickel alloys, drawn - dimensions, limit dimensions and shape tolerances
• DIN 59768 Rectangular rods made of nickel and wrought nickel alloys, drawn, with sharp edges - dimensions, limit dimensions and shape tolerances
• DIN 59780 round wire made of nickel and wrought nickel alloys, hot-rolled - dimensions, limit dimensions and shape tolerances
• DIN 59781 round wires made of nickel and wrought nickel alloys, drawn - dimensions, limit dimensions and shape tolerances

DIN 60000-69999

• DIN 60000 textiles - basic terms
• DIN 60001 textile fibers
  • Part 1 natural fibers and symbols
  • Part 2 fiber and manufacturing forms
• DIN 60004 wool; Terms for the raw material
• DIN 60005 Textile lifting slings - Safety - Disposable lifting straps made of synthetic fibers for general purposes
• DIN 60009 Geosynthetics - Testing and determination of the bond coefficient with soil in the pull-out test
• DIN 60011 flax fiber; Processing stages
• DIN 60014 textile machines - conveyor belts for textile machines
• DIN 60021 Spinning preparation and pre-spinning products; Terms
• DIN 60455 Marking of the connections of electrical equipment
• DIN 60500 geotextiles and geotextile-related products
  • Part 4 Determination of the water permeability normal to the plane under load with constant hydraulic height difference
  • Part 8 Determination of the water permeability coefficient with radial flow in the plane
• DIN 60900 yarns
  • Part 1 Technological classification, terms
  • Part 2 Description in the Tex system
  • Part 4 Description in the Nm system
  • Part 5 Textured Filament Yarns; Manufacturing process and terms
  • Part 6 staple fiber yarns; Terms and classification according to manufacturing process
• DIN 60905 Tex system
  • Part 1 basics
  • Part 3 rounding of calculated subtleties
• DIN 60910 Textile fiber materials; General terms of fineness; Conversion tables in the Tex system
• DIN 60917 knitting and knitting machines; Comparison of subtleties and needle pitches (invalid)
• DIN 61010 textiles - upholstery fabrics for living areas
• DIN 61040 textile machines - work processes on weaving machines
• DIN 61100 fabric
  • Part 1 distinguishing features
  • Part 2 Technological information for the description
• DIN 61101 weave
  • Part 1 General terms, basic ties
• DIN 61106 system for creating pattern repeats
• DIN 61110 harness draw-ins; Terms, classification
• DIN 61200 felts; hardness
• DIN 61211 Textile fabrics produced on stitchbonding machines - Technological classification, terms
• DIN 61400 sewing machines - types of sewing stitches - classification and terms (ISO 4915: 1991, modified)
• DIN 61506 One-piece work suits for men; Combinations and boiler suits
• DIN 61512 work overalls for men
• DIN 61513 work overalls for women
• DIN 61535 work coats for men; Short and long form
  • Part 1 minimum requirements and tests (proposal for a European standard) , March 2004 replaced by DIN EN 14465
• DIN 61551 geosynthetics - Determination of the burst pressure strength
• DIN 61577 stitch widths for sewing two- and four-hole buttons
• DIN 61603 Usable sizes of bed linen
  • Part 1 adult duvet covers
• DIN 61631 bandages; Gauze bandages
• DIN 61632 bandages; Ideal bandages
• DIN 61633 bandages; Tricot tube ties
• DIN 61634 bandages; Elastic fixation bandage
• DIN 61650 cleaning rags
• DIN 61651 machine cleaning cloths
• DIN 61704 operations in the textile finishing industry for woven, knitted and knitted fabrics
• DIN 61712 winding boards for textile fabrics
• DIN 61750 base areas of the shipping packaging for textiles
• DIN 61751 footprints of sales units for textiles
  • Part 1 Knitted and knitted underwear including nightwear
  • Part 2 Knitted men's and children's stockings, knitted tights
• DIN 61752 layout dimensions for sales units of textiles
  • Part 1 household and dowry laundry
  • Part 2 handkerchiefs
  • Part 3 prefabricated curtains
  • Part 4 work clothing
  • Part 5 smocks and aprons
  • Part 8 cleaning wipes
  • Part 9 tapestries
• DIN 61850 textile glass and processing aids; Terms
• DIN 61853 textile glass; Textile glass mats for plastic reinforcement
  • Part 1 Technical delivery conditions
  • Part 2 classification, application
• DIN 61854 textile glass; Textile glass fabric for plastic reinforcement; Filament fabrics and roving fabrics
  • Part 1 Technical delivery conditions
  • Part 2 types
• DIN 62055 knitted and crocheted fabrics; Pile fabrics; Terms
• DIN 62130 circular knitting machines; Terms
• DIN 62136 Textile Machines and Accessories - Needle and sinker lubricating oils for knitting machines
  • Part 1 Minimum requirements for oils based on mineral oil
  • Part 2 Minimum requirements for oils on a synthetic basis
• DIN 62150 point needles for RL circular knitting machines, round shank
• DIN 62151 point needles for RL circular knitting machines, shank flat and stretched
• DIN 62154 plates for RL flat knitting machines; Terms
• DIN 62155 plates for RL automatic warp knitting machines; Terms
• DIN 62500 warp preparation and systems for warp preparation - terms
• DIN 63201 symbols for textile machines
• DIN 63202 textile machines and accessories - safety signs - warning signs
• DIN 64083 flyer for the cotton spinning process; Terms, building principles
• DIN 64600 reeds
• DIN 64639 textile machines and accessories - Heald frames for air-jet weaving machines - Connection dimensions
• DIN 64905 cylindrical sleeves for textile fabrics
• DIN 64936 Color trees for textile fabrics; Main dimensions
• DIN 65000 aerospace - subject group directory of aviation standards
  • Part 1 basic standards, materials, semi-finished products, standard parts
  • Part 2 electrical engineering
  • Part 7 Air Freight and Ground Equipment
• DIN 65002 aerospace; Electrical circular connectors; Technical delivery conditions
• DIN 65004 aerospace; Socket head cap screws with cross recess, with long thread
• DIN 65013 aerospace; Screws made of high-strength steels and corrosion-resistant Ni and Co-based materials with a nominal tensile strength of 1,800 MPa - technical delivery conditions
• DIN 65016 aerospace; Self-locking nuts with reduced locking torque with a maximum operating temperature less than or equal to 425 ° C - technical delivery conditions
• DIN 65021 aerospace; Sheets, plates and strips of steel, nickel and cobalt alloys; Technical delivery conditions
• DIN 65030 aerospace; Solderless pipe fittings with cutting ring - Technical delivery conditions; Not for new designs
• DIN 65033 aerospace; Forgings made of aluminum and magnesium alloys; Technical delivery conditions; Not for new designs of forgings made of aluminum alloys
• DIN 65034 aerospace; Castings of steel, nickel and cobalt alloys; Technical delivery conditions; Not for new designs
• DIN 65035 aerospace; Raw material, forgings and rings made of steel, nickel and cobalt alloys; Technical delivery conditions; Not for new designs of primary material, forgings and rings made of steel
• DIN 65038
  • Part 1 Aerospace; Bars of steel, nickel and cobalt alloys; Technical delivery conditions
  • Part 2 Aerospace; Bars of steel, nickel and cobalt alloys for aeronautical equipment; Technical delivery conditions, scope of testing
• DIN 65039 aerospace; Sheets, plates and strips of titanium and titanium alloys; Technical delivery conditions
• DIN 65040 aerospace; Bars, rings, forging stock and forgings of titanium and titanium alloys; Technical delivery conditions
• DIN 65046 aerospace; Test methods for surface protection layers; Coating materials
  • Part 1 overview and symbols
  • Part 2 samples, sample preparation, drying
  • Part 3 tests in the delivery condition
  • Part 4 tests of coatings
  • Part 5 Resistance tests of coatings
  • Part 6 Chemical and galvanic coatings - Not for new constructions
• DIN 65052 aerospace; Pulleys; Technical delivery conditions
• DIN 65053 aerospace; Rope shoes; Technical delivery conditions; Not for new designs
• DIN 65054 aerospace; Self-adhesive foils for identification; Technical delivery conditions
• DIN 65055 aerospace; Turnbuckles and turnbuckle nuts; Technical delivery conditions; Not for new designs
• DIN 65058 Aerospace series - Screws made of corrosion-resistant steel with a nominal tensile strength of 900 MPa and 1100 MPa for temperatures up to 425 ° C - Technical delivery conditions; Text in German and English
• DIN 65060 aerospace; Textile glass; Textile glass filament rovings for plastic reinforcement; Technical delivery conditions
• DIN 65063 aerospace; Soft foam, panels made from asbestos (chrysotile), technical delivery conditions
• DIN 65064 Aerospace - Edge and core filling compounds for core composites - Technical delivery conditions
• DIN 65065 aerospace; Reaction resins for fiber-reinforced molding materials, technical delivery conditions
• DIN 65066 aerospace; Textile glass; Fabrics made from glass filament yarn; Technical delivery conditions
• DIN 65067
  • Part 1 Aerospace; Core composite parts with fiber-reinforced (FK) cover layers, technical delivery conditions
• DIN 65071 aerospace; Fiber-reinforced molded materials
  • Part 1 Manufacture of the test plates from unidirectionally wound yarns and rovings
  • Part 2 Production of test plates from flat reinforcing materials
  • Part 3 Manufacture of core composite test plates from honeycombs and prepregs
• DIN 65074 Aerospace - Adhesive foils and primers for load-bearing parts - Technical delivery conditions
• DIN 65078 aerospace; Cleaning with organic solvents; Identification number 0014
• DIN 65079 aerospace; Cleaning of metal surfaces alkaline; Identification numbers 0020 and 0021
• DIN 65080 aerospace; Pickling of aluminum and aluminum alloys alkaline; Identification number 0110
• DIN 65083 aerospace; Heat treatment of castings made of titanium and titanium alloys
• DIN 65084 aerospace; Heat treatment of titanium and wrought titanium alloys
• DIN 65090 aerospace; Textile glass, pre-impregnated filament fabrics made of E-glass (prepreg), technical delivery conditions
• DIN 65092 aerospace; Testing of aircraft equipment under environmental conditions; Testing of insulation resistance and dielectric strength of electrical devices; Identical to ISO 2678: 1985
• DIN 65099 aerospace; Classification of special production equipment
  • Part 1 overview
  • Part 2 process main group A; Archetypes
  • Part 3 main process group B; Forming
  • Part 4 main process group C; Separate
  • Part 5 main process group D; Put
  • Part 6 Process Main Group E; Coating
  • Part 7 main process group F; Change substance properties
  • Part 8 Process Main Group G; Check
  • Part 9 main process group H; Effect material flow, design work environment, transport
• DIN 65100 Aerospace series - Threaded inserts made of wire, screw-locking, made of copper alloy - Class: 490 MPa / 300 ° C; Text in German and English
• DIN 65101 Aerospace - Pure shear bolts with stepped thread - Technical delivery conditions
• DIN 65107 Aerospace - Flat conductor ribbon cables, 300 V, unshielded, 150 ° C; Not for new designs
• DIN 65108 Aerospace - Flat conductor ribbon cables, 300 V, unshielded, 200 ° C; Not for new designs
• DIN 65109 Aerospace - Flat conductor ribbon cables, unshielded, 300 V, 150 and 200 ° C - Technical delivery conditions; Not for new designs
• DIN 65110 aerospace; Twelve point heads for screws and bolts
• DIN 65112 aerospace; Threaded inserts, secured and screw locking; Technical delivery conditions
• DIN 65113 aerospace; Rods and pressed profiles made of aluminum and wrought aluminum alloys; Technical delivery conditions; Not for new designs
• DIN 65115 aerospace; Hexagon expansion screws with MJ thread made of steel; Nominal tensile strength 1100 MPa, for temperatures up to 235 ° C
• DIN 65116 aerospace; Boron fiber reinforced molding materials, production of test laminates
• DIN 65117 aerospace; Pre-impregnated unidirectional boron fiber scrim (BFK prepreg), dimensions, weights
• DIN 65118 Welding in aircraft and spacecraft construction - Welded metallic components - Information in construction documents and general design requirements
• DIN 65121 aerospace; Screws, nuts and accessories; Overview and selection for production equipment; Not for new designs
• DIN 65122 Aerospace - Powder for use in additive manufacturing using powder bed processes - Technical delivery conditions
• DIN 65142 aerospace; Pre-impregnated fiber fabric (prepreg); Determination of the bond strength
• DIN 65144 aerospace; Thermally sprayed components; Technical delivery conditions
• DIN 65145
  • Part 1 Aerospace; Supply device for flashing warning lights
  • Part 2 Aerospace; Supply device for flash warning lights; Technical delivery conditions
• DIN 65146 aerospace; Fabric prepreg made from carbon filament yarn and epoxy resin
  • Part 2 Technical delivery conditions
• DIN 65147 aerospace; Carbon fiber; Woven fabric made from carbon filament yarn
  • Part 1 dimensions, masses
  • Part 2 Technical delivery conditions
• DIN 65148 aerospace; Testing of fiber-reinforced plastics; Determination of the interlaminar shear strength in the tensile test
• DIN 65149 aerospace; Steel screws for non-load-bearing components, M 3 and M 4, technical delivery conditions
• DIN 65151 aerospace - Dynamic testing of the securing behavior of screw connections under transverse loads (vibration test)
• DIN 65152 aerospace; Special hot harnesses made of steel; Calculation and acceptance conditions
• DIN 65153 aerospace - acceptance tests for plasma welding equipment
• DIN 65154 aerospace; Identification plates for measuring bases on manufacturing equipment
• DIN 65155 aerospace; Fitted rivets made of steel with universal head; Shank tolerance 0 to −0.02 mm, metric series
• DIN 65156 aerospace; Fitted rivets made of steel with countersunk head 100 °; Shank tolerance 0 to - 0.02 mm, metric series
• DIN 65157 aerospace; Steel locking rings, metric series
• DIN 65158 aerospace; Blind rivets made of aluminum alloy with buttonhead and self-locking
• DIN 65159 aerospace; Blind rivets made of aluminum alloy with countersunk head 100 ° and self-locking
• DIN 65160 aerospace - screws made of material 1.4534 - nominal tensile strength 1550 MPa - technical delivery conditions
• DIN 65164 Aerospace - Non-metallic braided hoses
  • Part 1 dimensions, masses
  • Part 2 Technical delivery conditions; Not for new designs
• DIN 65165
  • Part 1 Aerospace - Hand lamps for cockpit, adjustable in light intensity and light color; Not for new designs
  • Part 2 Aerospace - Hand lamps for cockpit, adjustable in light intensity and light color - Technical delivery conditions; Not for new designs
• DIN 65166 aerospace; Wedge plates made of wrought aluminum alloys; Technical delivery conditions
• DIN 65169 aerospace; Hard and high temperature soldered components; Construction guidelines
• DIN 65170 Aerospace - Hard and high temperature soldered metallic components - Technical delivery conditions; Text in German and English
• DIN 65171 aerospace - acceptance tests for devices and additional equipment for fusion welding - guidance and movement accuracy
• DIN 65174 aerospace; Round bars of titanium and titanium alloys; Dimensions, masses
• DIN 65176 aerospace; Tying of pipelines, construction, manufacturing
• DIN 65177 aerospace; Hexagon expansion screws with MJ thread made of titanium alloy; Nominal tensile strength 1100 MPa, for temperatures up to 315 ° C
• DIN 65178 aerospace; Design and execution of lines for liquid or gaseous media
  • Part 1 overview and terms
  • Part 2 pipelines, construction
  • Part 3 pipelines, manufacturing
  • Part 6 hose lines, production
• DIN 65179 aerospace; Countersunk fitting screws with ribbed wing cross recess and MJ thread, with short thread, made of titanium alloy; Nominal tensile strength 1100 MPa, for temperatures up to 315 ° C
• DIN 65180 aerospace; Electrical circular connectors of medium and high pin density with detachable contacts on the rear; assembly Instructions
• DIN 65181 aerospace; Measuring the electrical surface resistance of electrically conductive layers
• DIN 65184 aerospace; Carbon fibers; High tenacity carbon filament yarns; Dimensions, masses
• DIN 65185 aerospace; Closures; Twist locks for structural and non-structural use
  • Part 1 Technical delivery conditions
• DIN 65186 aerospace; Profiles made of wrought aluminum alloys, formed from sheets and strips; Technical delivery conditions; Not for new designs
• DIN 65187 aerospace; Inserts for composite materials with through hole made of aluminum alloy
• DIN 65188 Aerospace - Inserts for composite materials with MJ thread, closed, small version, screw-locking, made of aluminum alloy; Text in German and English
• DIN 65189 aerospace; Inserts for composite materials with MJ thread, open, screw-locking made of aluminum alloy
• DIN 65190 aerospace; Inserts for composite materials with MJ thread, closed, screw-locking made of aluminum alloy
• DIN 65191 Aerospace - Inserts for composite materials with MJ thread, threaded part movable and screw-locking, made of corrosion-resistant steel
• DIN 65194 aerospace; Blind plugs for electrical circular connectors
• DIN 65197 aerospace; Round bars and wires made of titanium alloys as screw materials; Dimensions, masses
• DIN 65202 aerospace; Elastomer O-Rings - Dimensions
• DIN 65203 Aerospace - O-rings made of elastomers - Technical delivery conditions; Text in German and English
• DIN 65207 aerospace; Tolerances for sheet metal profiles made of wrought aluminum alloys
• DIN 65208 Aerospace - Testing of locking torques for nuts and similar threaded parts with MJ thread - Test screw
• DIN 65209 Aerospace - Washers, countersunk; Text in German and English
• DIN 65210 aerospace; Hose lines for nominal pressures up to 210 bar
  • Part 1 Technical delivery conditions for hoses
  • Part 2 Technical delivery conditions for hose screw connections
  • Part 3 Technical delivery conditions; Hose lines complete
• DIN 65211 aerospace - hose lines for nominal pressure 210 bar
  • Part 1 Technical delivery conditions for hoses; Not for new designs
  • Part 2 Technical delivery conditions for hose screw connections; Not for new designs
  • Part 3 Technical delivery conditions - complete hose lines; Not for new designs
• DIN 65212 aerospace; Instrument hoses for low pressure; Technical delivery conditions
• DIN 65213 aerospace; Hoses; Socket hoses nominal pressures up to 35 bar; Technical delivery conditions
• DIN 65219 aerospace - sealing rings - dimensions, masses
• DIN 65220 aerospace; Anniet nut strips with self-locking nuts with MJ thread - nut spacing specified or optionally strip made of aluminum; Class: 1100 MPa / 120 ° C
• DIN 65221 aerospace; Elastomer cork panels; Technical delivery conditions; Not for new designs
• DIN 65227 aerospace; Guide bushes for manufacturing equipment, for free-hand milling machines; Recess: 2.5 mm
• DIN 65229 Aerospace - Sealing plates (IT plates) - Technical delivery conditions; Not for new designs
• DIN 65230 aerospace; Anodic polishing of martensitic hardening stainless steels; Identification number 2600
• DIN 65236 aerospace; Wires made of steel, nickel and cobalt alloys; Technical delivery conditions
• DIN 65237 Aerospace - Spherical plain bearings, steel on steel - Technical delivery conditions; Not for new designs
• DIN 65238 Aerospace - Rivet nuts with MJ thread, with cylindrical counterbore, self-locking, non-movable, corner flange, made of steel; Class: 1100 MPa / 235 ° C
• DIN 65239 Aerospace - Rivet nuts with MJ thread, with cylindrical countersink, self-locking, fixed, corner flange, made of corrosion-resistant steel, class: 1100 MPa / 315 ° C / 425 ° C
• DIN 65240 Aerospace - Rivet nuts with MJ thread, with cylindrical counterbore, self-locking, movable, flange on both sides, made of steel; Class: 1100 MPa / 235 ° C
• DIN 65242 Aerospace - Rivet nuts with MJ thread, with cylindrical counterbore, self-locking, movable, flange on both sides, made of corrosion-resistant steel, class: 1,100 MPa / 315 ° C / 425 ° C; Text in German and English; Not for new designs
• DIN 65243 Aerospace - Rivet nuts with MJ thread, with cylindrical counterbore, self-locking, movable, one-sided flange, made of steel; Class: 1100 MPa / 235 ° C
• DIN 65244 Aerospace industry - Rivet nuts with MJ thread, with cylindrical counterbore, self-locking, movable, one-sided flange, made of corrosion-resistant steel, class: 1,100 MPa / 315 ° C / 425 ° C; Text in German and English; Not for new designs
• DIN 65245 aerospace; Hexagon nuts with MJ thread, self-locking, made of steel, class: 1100 MPa / 120 ° C
• DIN 65246 aerospace; Castle nuts with MJ thread, self-locking, made of steel, class: 1100 MPa / 120 ° C
• DIN 65247 aerospace; Flat castle nuts with MJ thread, made of corrosion-resistant steel, class: 1100 MPa / 425 ° C
• DIN 65249 aerospace; Hexagon nuts with MJ thread, self-locking, made of wrought copper alloy; Class: 400 MPa / 120 ° C
• DIN 65250 aerospace; Internal pressure pipes made of titanium and titanium alloys, seamless; Dimensions, masses
• DIN 65251 Aerospace - Screws with MJ thread made of titanium alloys, strength class 900 MPa and 1 100 MPa - Technical delivery conditions
• DIN 65252 Aerospace industry - Elastomer foam, mixed cells - Semi-finished products and molded parts - Technical delivery conditions; Text in German and English; Not for new designs
• DIN 65253 offset screwdriver for screws with internal serration
• DIN 65254 screwdriver bits with external hexagon for screws with internal serration
• DIN 65258 aerospace; Countersunk rivets 100 ° made of aluminum and wrought aluminum alloys, metric series
• DIN 65259 aerospace; Countersunk rivets 100 ° made of aluminum and wrought aluminum alloys, reduced head, metric series
• DIN 65260 aerospace; Universal rivets made of aluminum and wrought aluminum alloys, metric series
• DIN 65262 aerospace - sealing compounds
  • Part 1 Based on polysulphide polymers; Technical delivery conditions
  • Part 2 Based on vinylidene fluoride and hexafluoropropylene; Technical delivery conditions
  • Part 3 Based on silicone rubber; Technical delivery conditions
• DIN 65265 aerospace - hexagon bolts with MJ thread, thread almost up to the head, made of titanium alloy - nominal tensile strength 1100 MPa, for temperatures up to 315 ° C
• DIN 65266 aerospace; Covering fabric, technical delivery conditions
• DIN 65267 aerospace; Hexagon bolts with MJ thread; Thread almost to the head, made of steel; Nominal tensile strength 900 MPa, for temperatures up to 235 ° C
• DIN 65268 Aerospace - Hexagon bolts with MJ thread, with short thread, made of titanium alloy, nominal tensile strength 1 100 MPa, for temperatures up to 315 ° C
• DIN 65269 aerospace; Countersunk fitting screws with ribbed wing cross recess and MJ thread, with short thread, made of steel; Nominal tensile strength 900 MPa, for temperatures up to 235 ° C
• DIN 65270 Aerospace - Castle nuts with MJ thread, self-locking, made of corrosion-resistant steel, class: 1100 MPa / 120 ° C
• DIN 65271 Aerospace - Semi-finished products and parts made of elastomers - Technical delivery conditions
• DIN 65281 Aerospace - Flat hexagon nuts with MJ thread made of corrosion-resistant steel, class: 1100 MPa / 315 ° C / 425 ° C
• DIN 65284 aerospace; Countersunk screws with ribbed wing cross recess and MJ thread, with thread almost up to the head, made of corrosion-resistant steel; Nominal tensile strength 1100 MPa, for temperatures up to 425 ° C
• DIN 65285 aerospace; Countersunk head screws with ribbed wing cross recess and MJ thread, with short thread, made of corrosion-resistant steel; Nominal tensile strength 1100 MPa, for temperatures up to 425 ° C
• DIN 65286 aerospace; Countersunk head screws with ribbed wing cross recess and MJ thread, with short thread, made of steel; Nominal tensile strength 900 MPa, for temperatures up to 235 ° C
• DIN 65289 aerospace; Countersunk screws with ribbed cross-head recess and MJ thread, with short thread, made of titanium alloy; Nominal tensile strength 1100 MPa, temperatures up to 315 ° C
• DIN 65298 aerospace; Universal joints, needle bearings, with long-term lubrication for rotating shafts; Universal joints; Connection dimensions, loads, masses
• DIN 65299 aerospace; Universal joints, needle bearings, with long-term lubrication for rotating shafts; Double universal joints; Connection dimensions, loads, masses
• DIN 65300 aerospace; Universal joints, needle bearings, with long-term lubrication for rotating shafts; Technical delivery conditions
• DIN 65304 aerospace; Sealing rings - Technical delivery conditions
• DIN 65306 aerospace; Inserts for composite materials with through hole made of corrosion-resistant steel
• DIN 65307 aerospace; Inserts for composite materials with MJ thread, closed, small version, screw-locking made of corrosion-resistant steel; Text in German and English
• DIN 65308 aerospace; Inserts for composite materials with MJ thread, open, screw-locking, made of corrosion-resistant steel; Text in German and English
• DIN 65309 aerospace; Inserts for composite materials with MJ thread, closed, screw-locking, made of corrosion-resistant steel; Text in German and English
• DIN 65313 aerospace; Flat head screws with ribbed cross recess and MJ thread; Thread almost to the head, made of corrosion-resistant steel; Nominal tensile strength 1100 MPa, for temperatures up to 425 ° C
• DIN 65314 aerospace; Countersunk close-fitting screws with ribbed wing cross recess with MJ thread, with short thread, made of steel - nominal tensile strength 1100 MPa, for temperatures up to 235 ° C
• DIN 65316 aerospace; Countersunk fit screws with ribbed wing cross recess and MJ thread, with short thread, made of corrosion-resistant steel; Nominal tensile strength 1100 MPa, for temperatures up to 425 ° C
• DIN 65317 aerospace; Countersunk head screws with ribbed wing cross recess and MJ thread, with short thread, made of steel; Nominal tensile strength 1100 MPa, for temperatures up to 235 ° C
• DIN 65318 aerospace; Flat head screws with ribbed cross recess and MJ thread, with short thread, made of steel; Nominal tensile strength 1100 MPa, for temperatures up to 235 ° C
• DIN 65319 aerospace; Flat head close-fitting screws with ribbed wing cross recess and MJ thread, with short thread, made of corrosion-resistant steel; Nominal tensile strength 1100 MPa, for temperatures up to 425 ° C
• DIN 65320 aerospace; Flat head close-fitting screws with ribbed wing cross recess and MJ thread, with short thread, made of steel; Nominal tensile strength 1100 MPa, for temperatures up to 235 ° C
• DIN 65321 aerospace; Panels, panes and molded parts made of acrylic glass; Technical delivery conditions
• DIN 65324 aerospace; Flat head close-fitting screws with ribbed wing cross recess and MJ thread, with short thread, made of titanium alloy; Nominal tensile strength 1100 MPa, for temperatures up to 315 ° C
• DIN 65330 aerospace; Hexagon head bolts with MJ thread, with short thread made of steel; Nominal tensile strength 1100 MPa, for temperatures up to 235 ° C
• DIN 65338 aerospace; Hexagon fitting screws with MJ thread, with short offset thread, made of titanium alloy; Nominal tensile strength 1100 MPa, for temperatures up to 315 ° C
• DIN 65339 aerospace; Hexagonal close-fitting bolts with MJ thread, with short thread, made of corrosion-resistant steel - nominal tensile strength 1100 MPa, for temperatures up to 425 ° C
• DIN 65342 aerospace; Rivet nuts with MJ thread, with cylindrical countersink, self-locking, shortened flange on both sides, made of corrosion-resistant steel, class: 1100 MPa / 315 ° C / 425 ° C
• DIN 65343 Aerospace industry - Rivet nuts with MJ thread, with cylindrical counterbore, self-locking, shortened flange on both sides, made of steel; Class: 1100 MPa / 235 ° C
• DIN 65344 Aerospace - Rivet nuts with MJ thread, with cylindrical counterbore, self-locking, flange on both sides, made of corrosion-resistant steel, class: 1100 MPa / 315 ° C / 425 ° C
• DIN 65345 aerospace - Rivet nuts with MJ thread, with cylindrical counterbore, self-locking, flange on both sides, made of steel - class: 1100 MPa / 235 ° C
• DIN 65346 Aerospace - Rivet nuts with MJ thread, with cylindrical counterbore, self-locking, one-sided flange, made of corrosion-resistant steel, class: 1100 MPa / 315 ° C / 425 ° C
  • Correction 1
• DIN 65347 Aerospace - Rivet nuts with MJ thread, with cylindrical counterbore, self-locking, one-sided flange, made of steel; Class: 1100 MPa / 235 ° C
• DIN 65348 aerospace; Seamless internal pressure pipes made of titanium alloys; Technical delivery conditions
• DIN 65349 Aerospace - Testing of locking torques for nuts and similar threaded parts with metric threads - Test method
• DIN 65350 aerospace; Rivets
  • Part 1 component accessibility with riveting tools for solid rivets
  • Part 2 Component accessibility with riveting tools for blind rivets
  • Part 3 component accessibility with riveting tools for screw rivets
  • Part 4 component accessibility with riveting tools for fitting rivets
• DIN 65355 aerospace; Locking rings, metric series, made of wrought aluminum alloy
• DIN 65356 aerospace; Aromatic polyamide (aramid); High tenacity aramid filament yarns
  • Part 1 dimensions, masses
  • Part 2 Technical delivery conditions
• DIN 65358 aerospace - testing of locking torques for nuts and similar threaded parts - with metric ISO thread, test screw
• DIN 65359 aerospace; Shielded cables with copper conductors, with insulated shield, one to four-core, 600 V, 105 ° C; Technical delivery conditions; Not for new designs
• DIN 65360 aerospace; Roller chains; Technical delivery conditions
• DIN 65363 aerospace; Lock washers for operating rods
• DIN 65364 aerospace; Clevises for adjustable operating rods; Not for new designs
• DIN 65365 aerospace; Double clevis for adjustable operating rods; Not for new designs
• DIN 65367 aerospace; Spacers for pipelines
• DIN 65368 aerospace; Cords; Dimensions, masses
• DIN 65369 aerospace; Sockets, 5- and 11-pole, 25 A
• DIN 65370 aerospace; Sockets, 8- and 14-pole, 5 A
• DIN 65373 aerospace; Semi-finished products and molded parts made of polyamide (PA); Technical delivery conditions
• DIN 65374 aerospace; Semi-finished products and molded parts made of polytetrafluoroethylene (PTFE); Technical delivery conditions
• DIN 65375 aerospace; Fiber reinforced plastics; Testing of unidirectional laminates; Pressure test across the grain
• DIN 65378 aerospace; Fiber reinforced plastics; Testing of unidirectional laminates; Tensile test across the grain
• DIN 65379 aerospace; 100 ° countersunk rivets made of nickel alloys
• DIN 65382 aerospace; Reinforcement fibers for plastics; Tensile test on impregnated yarn test pieces
• DIN 65383 Aerospace - Filament fabric prepregs made of textile glass and EP reaction resin for structural use - Technical delivery conditions
• DIN 65385 aerospace; Fluid technology; Hydraulics; Filter elements; Evidence for the examination
• DIN 65389 Aerospace - Cold rolled steel sheets - Dimensions, masses
• DIN 65390 aerospace; Hot rolled steel sheets and plates; Dimensions, masses
• DIN 65391 Aerospace industry - Self-locking nuts with MJ thread, made of corrosion-resistant steel; Class: 1100 MPa / 315 ° C / 425 ° C
• DIN 65392 Aerospace - Press-in nuts with MJ thread, self-locking, flexible, made of steel; Class: 1100 MPa / 235 ° C
• DIN 65393 Aerospace series - Threaded inserts with MJ thread, with ring lock, screw-locking, made of steel; Class: 900 MPa / 1100 MPa / 1250 MPa / 1550 MPa / 235 ° C
• DIN 65394 Aerospace - Thread inserts with MJ thread, with ring lock, screw-locking, made of corrosion-resistant steel; Class: 900 MPa / 1100 MPa / 1250 MPa / 1550 MPa / 315 ° C / 425 ° C
• DIN 65395 aerospace; Stud bolts with MJ thread, with steel ring lock; Nominal tensile strength 900 MPa, for temperatures up to 235 ° C
• DIN 65396 aerospace; Stud bolts with MJ thread; with ring lock made of corrosion-resistant steel; Nominal tensile strength 1250 MPa, for temperatures up to 425 ° C
• DIN 65397 Aerospace - Thread inserts with MJ thread, secured, screw-locking, made of corrosion-resistant steel; Class: 1100 MPa / 315 ° C / 425 ° C
• DIN 65398 Aerospace - Thread inserts with MJ thread, secured, screw-locking, made of corrosion-resistant steel; Class: 900 MPa / 1100 MPa / 315 ° C
• DIN 65399 aerospace; Countersunk rivets 100 °, made of wrought aluminum alloys
• DIN 65422
  • Part 1 Aerospace; Flashing warning lights
  • Part 2 Aerospace; Flashing light warning lights; Technical delivery conditions
• DIN 65423 Aerospace - Headlights with ∅ 100 mm light exit; Not for new designs
• DIN 65424 Aerospace - Headlights with ∅ 134 mm light exit; Not for new designs
• DIN 65426 aerospace; Aromatic polyamide (aramid)
  • Part 1 filament fabric prepreg made from high modulus filament yarn; Dimensions, masses
  • Part 2 filament fabric prepreg made of high modulus filament yarn and EP resin; Technical delivery conditions
• DIN 65427 aerospace; Aromatic polyamide (aramid); Fabric made from high modulus filament yarn
  • Part 1 dimensions, masses
  • Part 2 Technical delivery conditions
• DIN 65428 Aerospace - Sleeves - Wall thickness 0.25 mm for connecting elements with protruding head; Text in German and English
• DIN 65429 Aerospace - Sleeves, wall thickness 0.5 mm, for connecting elements with protruding head; Text in German and English
• DIN 65430 Aerospace - Sleeves, wall thickness 0.25 mm, for connecting elements with countersunk head; Text in German and English
• DIN 65431 Aerospace - Sleeves - wall thickness 0.5 mm, for connecting elements with countersunk head; Text in German and English
• DIN 65433 aerospace - sleeves - wall thickness 0.25 mm for connecting elements with reduced countersunk head
• DIN 65434 Aerospace - Sleeves - Wall thickness 0.5 mm for connecting elements with reduced countersunk head; Text in German and English
• DIN 65435 aerospace; Sleeves for fasteners; Technical delivery conditions
• DIN 65436 aerospace; Standard (STQ) and Disc (DQ) quality of titanium and titanium alloys; Requirements and testing
• DIN 65438 aerospace; Twelve-point fitting screws with MJ thread, with short thread, made of titanium alloy; Nominal tensile strength 1100 MPa for temperatures up to 315 ° C
• DIN 65439 aerospace; Twelve-point close-fitting screws with MJ thread, with medium thread length made of steel, nominal tensile strength 1250 MPa for temperatures up to 235 ° C
• DIN 65440 aerospace; Twelve-point fitting screws with MJ thread, with medium thread length made of corrosion-resistant nickel alloy; Nominal tensile strength 1250 MPa for temperatures up to 315 ° C
• DIN 65441 aerospace; Twelve-point close-fitting screws with MJ thread, with medium thread length made of steel, nominal tensile strength 1550 MPa for temperatures up to 235 ° C
• DIN 65442 Aerospace - Twelve-point close-fitting screws with MJ thread, with medium thread length, made of corrosion-resistant nickel alloy - Nominal tensile strength 1 550 MPa for temperatures up to 315 ° C; Not for new designs
• DIN 65443 aerospace; Twelve-point close-fitting bolts with MJ thread, with medium thread length made of steel, nominal tensile strength 1800 MPa, temperatures up to 235 ° C
• DIN 65444 aerospace; Countersunk rivets 100 °, made of nickel alloy, metric series
• DIN 65445 aerospace; Countersunk rivets 100 °, reduced head, metric row, made of nickel alloys
• DIN 65446 aerospace; Universal rivet, made of nickel alloy, metric series
• DIN 65447 Aerospace - Twelve-point fitting screws with MJ thread, with medium thread length, made of corrosion-resistant nickel alloy - nominal tensile strength 1 550 MPa for temperatures up to 315 ° C
• DIN 65448 aerospace; Structural adhesives; Wedge test
• DIN 65451 Aerospace series - Threaded inserts with MJ thread, secured, screw-locking, made of steel; Class: 900 MPa / 1100 MPa / 235 ° C
• DIN 65452 aerospace; Headlights with ∅ 100, 134 and 200 mm light emission; Technical delivery conditions
• DIN 65453 aerospace; Unidirectional scrim prepreg made of carbon fibers and bismaleimide or polyimide resins; Technical delivery conditions
• DIN 65454 aerospace; Joint straps, extruded from aluminum and from corrosion-resistant steel; Hinge halves and hinges in production lengths light series
• DIN 65456 aerospace; Disks for operating rods, with hole for ground connection
• DIN 65457 aerospace; Thimbles made of sheet steel; Dimensions, masses
• DIN 65460 aerospace; Pickling of aluminum and aluminum alloys, acidic, also for resistance welding; Identification number 0100
• DIN 65461 aerospace - stud bolts with MJ thread, with captive locking ring, made of steel, nominal tensile strength 1 100 MPa, for temperatures up to 235 ° C
• DIN 65462 aerospace - stud bolts with MJ thread, with captive locking ring, made of corrosion-resistant steel, nominal tensile strength 1 100 MPa, for temperatures up to 315 ° C
• DIN 65463 Aerospace - Stud bolts with MJ thread, with captive retaining ring made of titanium alloy, nominal tensile strength 1 100 MPa, for temperatures up to 315 ° C
• DIN 65464 Aerospace - Stud bolts with MJ thread, with ring lock, made of titanium alloy - Nominal tensile strength 1100 MPa for temperatures up to 315 ° C; Text in German and English
• DIN 65465 aerospace; Washers for riveted joints, metric series
• DIN 65466 Aerospace - Fiber-reinforced plastics - Testing of unidirectional laminates; Determination of the shear strength and the shear modulus in the tensile test
• DIN 65467 Aerospace - Testing of reaction resin systems with and without reinforcement - DSC method
• DIN 65468 aerospace; Removes rays, cleanses; Identification number 0215
• DIN 65469 aerospace; Fiber reinforced plastics; Tensile test on single-layer tensile test specimens
• DIN 65470 aerospace; Welding consumables for welding metallic materials; Technical delivery conditions
• DIN 65471 aerospace; Welding consumables for titanium and titanium alloys; Welding rods and welding wires; Dimensions, masses
• DIN 65473 aerospace; Electrolytic degreasing and cleaning; Identification numbers 0030 to 0033
• DIN 65474 aerospace; Fiber reinforced plastics; Procedure for carrying out thermal spike tests
• DIN 65477 Aerospace industry - Press nuts with MJ thread, closed, self-locking, made of corrosion-resistant steel; Class: 1100 MPa / 315 ° C / 425 ° C
• DIN 65480 Aerospace - Hexagon nut with collar and MJ thread, self-locking, made of corrosion-resistant steel - Class: 1100 MPa / 315 ° C; Text in German and English
• DIN 65485 aerospace; Fasteners for structural use; Twist locks, mechanical properties; Twist lock, complete
• DIN 65486 aerospace; Fasteners for structural use; Twist locks, mechanical properties; Turn lock, complete, pressure-tight
• DIN 65487 aerospace; Fasteners for structural use; Twist locks; Rotary locking pin with countersunk head
• DIN 65488 aerospace; Fasteners for structural use; Twist locks; Installation dimensions
• DIN 65489 aerospace; Fasteners for structural and non-structural use; Twist locks; Countersunk washers
• DIN 65492 aerospace; Fasteners for structural use; Twist lock; Twist lock housing
• DIN 65493 aerospace; Fasteners for structural use; Twist locks; Rotary lock housing, pressure-tight
• DIN 65494 aerospace; Rivet calculation values ​​for static loads for universal rivet connections,
  • Part 101 single-cut; Rivet material 3.1124, metric series
  • Part 102 single-cut; Rivet material 3.1324, metric series
  • Part 103 single-cut; Rivet material 3.3354, metric series
  • Part 105 single-cut; Rivet material 2.4360, metric series
  • Part 301 two-cut; Rivet material 3.1124, metric series
  • Part 302 two-cut; Rivet material 3.1324, metric series
  • Part 303 two-cut; Rivet material 3.3354, metric series
  • Part 305 two-cut; Rivet material 2.4360, metric series
• DIN 65495 aerospace; Rivet calculation values ​​for static load, for countersunk rivet connections,
  • Part 101 single-cut; Rivet material 3.1124, metric series
  • Part 102 single-cut; Rivet material 3.1324, metric series
  • Part 105 single-cut; Rivet material 2.4360, metric series
  • Part 201 single-cut, warmed; Rivet material 3.1124, metric series
  • Part 202 single-cut, warmed; Rivet material 3.1324, metric series
  • Part 205 single-cut, warmed; Rivet material 2.4360, metric series
  • Part 301 two-cut; Rivet material 3.1124, metric series
  • Part 302 two-cut; Rivet material 3.1324, metric series
  • Part 401 two-cut, waxed; Rivet material 3.1124, metric series
  • Part 402 double-edged, waxed; Rivet material 3.1324, metric series
• DIN 65498 aerospace; Semi-finished products and molded parts made of polyetherimide (PEI); Technical delivery conditions
• DIN 65500 aerospace; Flat hexagon nuts with MJ thread made of aluminum alloy
• DIN 65501 aerospace - shims for rivet nuts with MJ thread
• DIN 65502 aerospace; Flat-head screws with ribbed winged cross recess and MJ thread, with short thread, made of corrosion-resistant steel; Nominal tensile strength 700 MPa, for temperatures up to 425 ° C
• DIN 65503 Aerospace - Rivet nuts with MJ thread, self-locking, pressure-tight, flange on both sides, made of steel; Class: 900 MPa, fuel-resistant from −55 ° C to 120 ° C
• DIN 65504 Aerospace - Rivet nuts with MJ thread, self-locking, pressure-tight, flange on both sides, made of corrosion-resistant steel, fuel-resistant from −55 ° C to 120 ° C
• DIN 65505 Aerospace - Rivet nuts with MJ thread, self-locking, pressure-tight, flange on both sides, made of steel; Class: 900 MPa, air-resistant from −55 ° C to 230 ° C
• DIN 65506 Aerospace - Rivet nuts with MJ thread, self-locking, pressure-tight, flange on both sides, made of corrosion-resistant steel, air-resistant from −55 ° C to 230 ° C
• DIN 65507 Aerospace - Hexagon nuts with MJ thread, with flared washer and countersink, self-locking, made of steel, class: 1 100 MPa / 235 ° C; Text in German and English
• DIN 65508 Aerospace - Hexagon nuts with MJ thread, with flared washer and counterbore, self-locking, made of corrosion-resistant steel - Class: 1 100 MPa / 315 ° C / 425 ° C; Text in German and English
• DIN 65509 aerospace; Hexagon nuts with MJ thread made of steel, class: 1100 MPa / 235 ° C
• DIN 65510 aerospace; Flat hexagon nuts with MJ thread, made of steel, class: 1100 MPa / 235 ° C
• DIN 65515 aerospace; Socket head cap screws with internal multi-point and MJ thread, with short thread, made of titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 ° C
• DIN 65516 aerospace; Socket head cap screws with internal multi-point and MJ thread, with short thread, made of steel, nominal tensile strength 900 MPa, for temperatures up to 235 ° C
• DIN 65517 aerospace - cylinder fitting screws with internal serration and MJ thread, short thread, made of titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 ° C
• DIN 65518 aerospace; Flat head screws with ribbed cross recess and MJ thread, with short thread, made of titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 ° C
• DIN 65519 aerospace; Flat head screws with ribbed winged cross recess and MJ thread, with short thread, made of steel, nominal tensile strength 900 MPa, for temperatures up to 235 ° C
• DIN 65520 aerospace; Flat head close-fitting screws with ribbed winged cross recess and MJ thread, with short thread, made of steel, nominal tensile strength 900 MPa, for temperatures up to 235 ° C
• DIN 65521 aerospace; Cross vents, ribbed
  • Part 1 dimensions
  • Part 2 depth gauges
  • Part 3 screwdriver tips
• DIN 65522 aerospace; Hexagon head bolts with MJ thread, thread almost to the head, made of corrosion-resistant steel, nominal tensile strength 700 MPa, for temperatures up to 425 ° C
• DIN 65523 aerospace; Hexagon head screws with MJ thread, with short thread, made of corrosion-resistant steel, nominal tensile strength 700 MPa, for temperatures up to 425 ° C
• DIN 65524 aerospace; Hexagon head screws with MJ thread, with short thread, made of steel, nominal tensile strength 900 MPa, for temperatures up to 235 ° C
• DIN 65525 aerospace; Hexagon fitting screws with MJ thread, with short thread, made of steel, nominal tensile strength 1100 MPa, for temperatures up to 235 ° C
• DIN 65526 ​​Aerospace - Hexagon fitting screws with short MJ thread, made of titanium alloy, nominal tensile strength 1100 MPa, for temperatures up to 315 ° C; Text in German and English
• DIN 65527 aerospace; Hexagon fitting screw with MJ thread, with short offset thread, made of steel, nominal tensile strength 1100 MPa, for temperatures up to 235 ° C
• DIN 65528 aerospace - twelve-point nuts with collar and MJ thread with cylindrical counterbore, self-locking, made of steel, class: 1550 MPa / 1800 MPa / 235 ° C
• DIN 65529 aerospace - twelve-point nuts with collar and MJ thread with cylindrical counterbore, self-locking, made of steel, class: 1250 MPa / 235 ° C
• DIN 65530 aerospace - twelve-point nuts with collar and MJ thread, with cylindrical counterbore, self-locking, made of corrosion-resistant steel, class: 1550 MPa / 315 ° C / 425 ° C
• DIN 65531 Aerospace - Twelve-point nuts with collar and MJ thread with cylindrical countersink, self-locking, made of corrosion-resistant steel, class: 1250 MPa / 315 ° C / 425 ° C
• DIN 65532 aerospace; Thread runouts, thread undercuts and thread ends for MJ threads according to DIN ISO 5855
• DIN 65533 Aerospace - Screws and nuts - Allocation of materials and surface treatments, recommended selection; Text in German and English
• DIN 65534 aerospace; Hexagon nuts with MJ thread, made of corrosion-resistant steel; Class: 1100 MPa / 650 ° C
• DIN 65535 Aerospace - Anniet nut strips with self-locking nuts with MJ thread; Nut pitch specified or optionally made of corrosion-resistant steel - class: 1100 MPa / 315 ° C
• DIN 65536 Aerospace - Wire thread inserts, screw-locking, made of copper alloy
  • Part 1 class: 1,100 MPa / 425 ° C; Not for new designs
  • Part 2 assembly and tools; Not for new designs
• DIN 65537 aerospace; Socket head cap screws with internal polygon and MJ thread, with short thread, made of nickel alloy; Nominal tensile strength 1250 MPa, for temperatures up to 315 ° C / 425 ° C
• DIN 65538 aerospace; Cylinder fitting screws with internal multi-point and MJ thread, with short thread, made of nickel alloy; Nominal tensile strength 1250 MPa, for temperatures up to 315 ° C / 425 ° C
• DIN 65539 Aerospace - Cheese head screws with internal serration and MJ thread, with tapered shank, made of nickel alloy, nominal tensile strength 1 250 MPa, for temperatures up to 315 ° C / 425 ° C
• DIN 65540 Aerospace - Cheese head screws with internal serration and MJ thread, with tapered shaft, made of titanium alloy - nominal tensile strength 1 100 MPa, for temperatures up to 315 ° C
• DIN 65541 aerospace; Flat head screws with ribbed cross recess and MJ thread; Thread almost to head, made of nickel alloy; Nominal tensile strength 1250 MPa, for temperatures up to 315 ° C / 425 ° C
• DIN 65542 aerospace; Countersunk fitting screws with ribbed wing cross recess and MJ thread, with short thread, made of nickel alloy; Nominal tensile strength 1250 MPa, for temperatures up to 315 ° C / 425 ° C
• DIN 65545 Aerospace - Hexagon nuts with MJ thread, self-locking, made of corrosion-resistant steel, class: 1 100 MPa / 120 ° C; Text in German and English
• DIN 65546 aerospace - twelve-point nuts with collar and MJ thread with cylindrical countersink, self-locking, made of corrosion-resistant steel, class: 1100 MPa / 315 ° C / 425 ° C
• DIN 65547 aerospace; Fit rivets with universal head, metric series, made of titanium alloy
• DIN 65548 aerospace; Fitted rivets with countersunk head 100 °, metric row, made of titanium alloy
• DIN 65549 aerospace; Fitted rivets with countersunk head 130 °, metric row, made of titanium alloy
• DIN 65551 aerospace; Blind rivets with reduced countersunk button 100 °, metric row, made of corrosion-resistant steel, with rivet mandrel
• DIN 65552 aerospace; Blind rivets with countersunk head 100 ° made of corrosion-resistant steel, with rivet mandrel, metric series
• DIN 65553 Aerospace - shims without hole for rivet nuts with MJ thread; Not for new designs
• DIN 65554 aerospace; Flat-head screws with ribbed winged cross recess and MJ thread, with short thread, made of corrosion-resistant steel; Nominal tensile strength 1100 MPa, for temperatures up to 425 ° C
• DIN 65555 aerospace; Hexagon head bolts with MJ thread, with short thread, made of corrosion-resistant steel; Nominal tensile strength 1100 MPa, for temperatures up to 425 ° C
• DIN 65557 aerospace; Flat head screws with ribbed cross recess and MJ thread; Thread almost to head, made of titanium alloy; Nominal tensile strength 1100 MPa, for temperatures up to 315 ° C
• DIN 65558 aerospace; Countersunk head screws with ribbed cross recess and MJ thread; Thread almost to head, made of titanium alloy; Nominal tensile strength 1100 MPa, for temperatures up to 315 ° C
• DIN 65564 aerospace; Reinforcement fibers; Qualitative determination of the components of the preparation of yarns, fabrics and short cuts from carbon filaments by means of HPLC
• DIN 65565 aerospace; Reinforcement fibers; Qualitative control of the preparation type of yarns, fabrics and short cuts made of carbon filaments by means of IR spectroscopy
• DIN 65566 aerospace; Reinforcement fibers; Determination of the percentage of preparation mass in yarns, fabrics and short cuts made of carbon filaments
• DIN 65567 aerospace; Reinforcement fibers; Determination of the proportion of preparation mass in yarns, fabrics and short cuts made from aramid filaments
• DIN 65568 aerospace; Reinforcement fibers; Determination of the thermo-oxidative resistance of yarns, fabrics and short cuts made of carbon filaments
• DIN 65569 aerospace; Reinforcement fibers; Determination of the density of filament yarns
  • Part 1 suspension procedure
  • Part 2 buoyancy method
• DIN 65570 aerospace; Heat treatment plants; General requirements
• DIN 65571 aerospace; Reinforcement fibers
  • Part 1 Determination of filament diameter and cross-sectional area of ​​filament yarns; Calculation method
  • Part 2 Determination of the filament diameter of filament yarns; Longitudinal projection method
  • Part 3 Determination of filament diameter, cross-sectional shape and cross-sectional area of ​​filament yarns; Cross-section measurement
  • Part 4 Determination of the filament diameter of filament yarns; Laser interferometry
• DIN 65572 aerospace; Unidirectional scrim prepreg made from carbon fibers and non-reactive thermoplastic; Technical delivery conditions
• DIN 65574 aerospace; Component labels; Construction guidelines
• DIN 65576 aerospace; Ball lock pins made of corrosion-resistant steel, simply secured, with lockable release actuation by means of a folding lever
• DIN 65578 aerospace; Ball lock pins made of corrosion-resistant steel, simply secured, with pull or push release
• DIN 65581 aerospace; Fit rivets made of titanium alloy and locking rings made of pure titanium, metric series; Technical delivery conditions
• DIN 65582 aerospace; Heat treatment of castings made of aluminum and magnesium alloys
• DIN 65583 Aerospace - Fiber-reinforced plastics - Determination of the glass transition of fiber composite materials under dynamic loading
• DIN 65587 aerospace; Webbing straps; Technical delivery conditions
• DIN 65590 aerospace; Braided linen; Technical delivery conditions
• DIN 65591 Aerospace - Wide fabric, uncoated - Technical delivery conditions
• DIN 65594 aerospace; Closing heads for solid rivets, flat head, inch series
• DIN 65595 aerospace; Locking heads for solid rivets; Flat head, metric row
• DIN 65597 aerospace; Fiber reinforced plastics; Determination of the temperature difference in the event of an exothermic reaction
• DIN 65598 aerospace; Fiber reinforced plastics; Determination of the frequency of cracks in laminates
• DIN 65603 aerospace; Color coding of holes up to 9.9 mm on drilling templates
• DIN 65604 aerospace; Special test equipment; Color coding
• DIN 65628 Aerospace - Fabric prepregs made of aramid fibers and non-reactive thermoplastic - Technical delivery conditions; Text in German and English
• DIN 65629 aerospace; Fabric prepreg made from carbon fibers and non-reactive thermoplastic; Technical delivery conditions
• DIN 65668 Aerospace - Dilution of oils for the purpose of particle counting
• DIN 65669 Aerospace - Method for determining the contamination of used liquid filter elements
  • Part 1 Gravimetric determination of solid contamination by taking material samples
• DIN 65671 Aerospace - Fabric prepregs made of glass fibers and non-reactive thermoplastic - Technical delivery conditions; Text in German and English
• DIN 65672 Aerospace - Continuous fiber-reinforced laminates with non-reactive thermoplastic - Manufacture of test plates; Text in German and English
• DIN 65673 Aerospace - Fiber-reinforced plastics - Yarn, fabric and prepreg defects; Definitions
• DIN 65736 aerospace; Screw calculation values ​​for static loads for countersunk screws, single-shear,
  • Part 1 screw materials 1.1174.7 and 1.4544.9
  • Part 3 screw material 1.7220.5
  • Part 5 screw materials 1.4944.4 and 1.7734.5
  • Part 7 screw material 1.6604.6
• DIN 65946 Aerospace series - Determination of the coefficients of friction of screws and nuts under specified conditions; Text in German and English
• DIN 66000 information processing; Mathematical signs and symbols of switching algebra
• DIN 66001 information processing; Symbols and their application
  • Supplement 1 Arrangement of symbols on a drawing template
• DIN 66002 Handwritten representation of the number 0 and the capital letter O
• DIN 66003 information processing, 7-bit code
• DIN 66004 information processing; Coding on data carriers
  • Part 1 Representation of the 7-bit code on punched tape 25
• DIN 66005 Space-saving representation of purely numerical data on magnetic tape with 9 tracks written on 12
• DIN 66006 Representation of ALGOL / ALCOR programs on punched tape and punched cards
• DIN 66007 font CMC 7 for mechanical magnetic character recognition , December 1999 replaced by DIN ISO 1004
• DIN 66008 font A for machine optical character recognition
• DIN 66009 font B for machine optical character recognition
• DIN 66020 interfaces in telephone networks
• DIN 66021 data transmission
• DIN 66025
  • Part 1 program structure for numerically controlled machines; General
  • Part 2 Industrial Automation; Program structure for numerically controlled machines; Path conditions and additional functions
• DIN 66027 Fortran
• DIN 66030 Information Technology - Representation of unit names in systems with a limited number of characters
• DIN 66034 kilopond - Newton, Newton - kilopond; Conversion tables
• DIN 66035 calorie - joule, joule - calorie; Conversion tables
• DIN 66036 horsepower - kilowatts, kilowatts - horsepower; Conversion tables
• DIN 66037 kilopond per square centimeter - bar, bar - kilopond per square centimeter; Conversion tables
• DIN 66038 Torr - Millibars, Millibars - Torr; Conversion table
• DIN 66039 kilocalorie - watt hour, watt hour - kilocalorie; Conversion tables
• DIN 66071 rake made of steel
• DIN 66072 porcelain tableware for the commercial sector; Dimensions
• DIN 66074 shoe sizes
  • Part 1 Basics of a size system (Mondopoint system)
  • Part 2 length graduation
  • Part 3 width grading for women's and men's footwear
• DIN 66075 facilities for the catering industry
  • Part 5 sink, dimensions
  • Part 7 cutouts for inserts
  • Part 8 crockery basket, dimensions
• DIN 66080 Classification of the burning behavior of textile products; Principles
• DIN 66083 Characteristic values ​​for the burning behavior of textile products - Textile fabrics for work clothes
• DIN 66084 classification of the burning behavior of upholstery composites
• DIN 66090 textile floor coverings
  • Part 1 requirements for the structure, reaction to fire
• DIN 66111 particle size analysis; Sedimentation analysis; Basics
  • Supplement 1 Evaluation equations for quantity measurement in the centrifugal force field
• DIN 66115 particle size analysis; Sedimentation analysis in the gravity field; Pipette method
• DIN 66116 grain (particle) size analysis; Sedimentation analysis in the gravity field
  • Part 1 sedimentation balance
• DIN 66118 particle size analysis - visual analysis - basics
• DIN 66119 particle size analysis - visual analysis with gravity countercurrent classifier
• DIN 66120 particle size analysis - visual analysis with centrifugal separator
• DIN 66126 Determination of the specific surface area of ​​disperse solids by means of gas flow - Blaine method
• DIN 66132 Determination of the specific surface area of ​​solids by nitrogen adsorption; One-point difference method according to Haul and Dümbgen
• DIN 66133 Determination of the pore volume distribution and the specific surface area of ​​solids by mercury intrusion
• DIN 66134 Determination of the pore size distribution and the specific surface area of ​​mesoporous solids by nitrogen sorption - method according to Barrett, Joyner and Halenda (BJH)
• DIN 66135 particle measurement technology - micropore analysis using gas adsorption
  • Part 1 Basics and measurement methods
  • Part 2 Determination of the micropore volume and the specific surface area by comparison of isotherms
  • Part 3 Determination of the micropore volume according to Dubinin and Radushkevich
  • Part 4 Determination of the pore distribution according to Horvath-Kawazoe and Saito-Foley
• DIN 66136 Determination of the degree of dispersion of metals by chemisorption
  • Part 1 basics
  • Part 2 volumetric method
  • Part 3 flow methods
  • Part 4 Static-gravimetric method
• DIN 66137 Determination of the density of solid substances
  • Part 1 basics
  • Part 2 gas pycnometry
  • Part 3 gas buoyancy method
• DIN 66138 Isothermal measurement of the sorption of vapors on solids
• DIN 66139 pore size analysis - representation of pore size distributions
• DIN 66142 Representation and marking of separations of disperse goods
  • Part 3 Selection and determination of characteristic values ​​for operational separations
• DIN 66143 Representation of grain (particle) size distributions - power network
• DIN 66144 Representation of grain (particle) size distributions - logarithmic normal distribution network
• DIN 66145 representation of grain (particle) size distributions - RRSB network
• DIN 66160 measurement of disperse systems, terms
• DIN 66161 particle size analysis , symbols, units
• DIN 66165 particle size analysis , sieve analysis
  • Part 1 basics
  • Part 2 implementation
• DIN 66201 process computer systems
  • Part 1 terms ; July 1998 replaced by DIN V 19233
• DIN 66215 programming of numerically controlled machines; CLDATA
  • Part 1 General structure and sentence types
  • Part 2 secondary parts of sentence type 2000
• DIN 66217 coordinate axes and directions of movement for numerically controlled machines
• DIN 66229 information technology - labels and file arrangement on magnetic tape cassettes for data exchange
• DIN 66230 information processing; Program documentation , withdrawn June 2004 without replacement
• DIN 66231 information processing; Program development documentation , withdrawn June 2004 without replacement
• DIN 66232 information processing; Data documentation , withdrawn June 2004 without replacement
• DIN 66234 computer workstations
  • Part 1 Geometric design of the characters , February 1998 replaced by DIN EN 29241-3
  • Part 2 Perceptibility of characters on screens , February 1998 replaced by DIN EN 29241-3
  • Part 3 Grouping and Formatting of Data , withdrawn February 1998 without replacement
  • Part 3 Supplement 1 Grouping and formatting of data; Notes and Examples , withdrawn February 1998 without replacement
  • Part 5 Coding of information , February 1998 replaced by DIN EN 29241-3
  • Part 5 Supplement 1 Coding of Information, Use of Graphics , February 1998 withdrawn without replacement
  • Part 5 Supplement 2 Coding of information, color combinations , withdrawn February 1998 without replacement
  • Part 6 Design of the workplace , April 2002 replaced by DIN EN 29241-3
  • Part 6 Supplement 1 Design of the workplace, examples , withdrawn April 2002 without replacement
  • Part 7 Ergonomic design of the work area - lighting and arrangement , April 2002 replaced by DIN EN 29241-3
  • Part 8 principles of ergonomic design of dialogue , May 1996 replaced by DIN EN ISO 9241 -10
  • Part 9 measurement method, February 1998 replaced by DIN EN 29241-3
  • Part 10 minimum information for display devices , withdrawn August 2001 without replacement
• DIN 66241 information processing; Decision table, means of description
• DIN 66246 programming of numerically controlled machines; Processor input language
  • Part 1 Basics and possible geometry definition and execution instructions
• DIN 66253 information technology - programming language PEARL
  • Part 2 PEARL 90
  • Part 3 multi-computer PEARL
• DIN 66255 PL / I
• DIN 66256 PASCAL
• DIN 66257 terms for NC machines
• DIN 66258 interfaces for data transmission
• DIN 66261 information processing; Symbols for structograms according to Nassi-Shneiderman
• DIN 66264 Industrial Automation and Integration - Multi-processor control system for work machines (MPST)
  • Part 1 parallel bus
  • Part 2 rules for exchanging information
• DIN 66265 interfaces of a core for transaction-oriented application systems (KDCS-TAS core); the abbreviation KDCS stands for "Compatible data communication interface"
• DIN 66267 Industrial Automation; Data exchange with numerical controls
  • Part 1 interface and transmission protocol
• DIN 66270 Information technology - Evaluation of software documents - Quality features
• DIN 66271 software errors and their assessment by suppliers and customers
• DIN 66272 Evaluation of software products - Quality features and guidelines for their use
• DIN 66273 information processing; Measurement and evaluation of the performance of IT systems
  • Part 1 measurement and evaluation method
  • Part 1 Supplement 1 Measurement and Evaluation Procedure; Introduction to the process
  • Part 2 standard load type A
  • Part 3 standard load type B
  • Part 4 standard load type C
• DIN 66274 information technology - Internet access
  • Part 2 classification
• DIN 66277 Information technology - Automatic identification and data acquisition procedures - Electronic nameplate
• DIN 66285 requirements for standard software (including functionality, efficiency, changeability)
• DIN 66291 chip cards with digital signature application / function according to SigG / SigV
  • Part 1 application interface
  • Part 2 Personalization Services
  • Part 3 Personalization commands
  • Part 4 Basic Security Services
• DIN 66303 information technology, 8-bit code
• DIN 66304 computer-aided design
• DIN 66341 information technology; Graphic data processing; Reference model; Identical to ISO / IEC 11072: 1992
• DIN 66348 interface and control method for serial measurement data transmission
  • Part 1 start-stop transmission, point-to-point connection
  • Part 2 start-stop transmission, measuring bus
  • Part 3 application services, telegrams and protocols
• DIN 66349 interface for the parallel transmission of measurement data; BCD interface
• DIN 66354 kitchen equipment; Forms, planning principles
• DIN 66359 information in public passenger transport - timetable books - content, structure and design
• DIN 66398 guideline for the development of a deletion concept with derivation of deletion periods for personal data
• DIN 66399 office and data technology - destruction of data carriers
  • Part 1 Basics and Terms
  • Part 2 Requirements for machines for the destruction of data carriers
• DIN 66401 UIM - Unmistakable identification mark - user standard for the smallest product markings with the help of matrix symbologies
• DIN 67500 lighting of lock systems; Requirements, calculation and measurement
• DIN 67510 photoluminescent pigments and products
  • Part 1 Measurement and labeling at the manufacturer
  • Part 2 Measurement of photoluminescent products at the point of use
  • Part 3 Low-level photoluminescent safety guidance system
  • Part 4 products for photoluminescent safety guidance system; Markings and markings
• DIN 67517 lighting technology - requirements for the qualification of lighting technicians - interior lighting
• DIN 67518 lighting technology - requirements for the qualification of lighting technicians - outdoor lighting
• DIN 67519 actinity in the optical field; Concept, measurement, application
• DIN 67520 Retroreflective materials for traffic safety and lighting requirements for reflective materials
• DIN 67523 lighting of pedestrian crossings (sign 293 StVO) with additional lighting
  • Part 1 General quality characteristics and guide values
  • Part 2 calculation and measurement
• DIN 67524 lighting of road tunnels and underpasses
  • Part 1 General quality characteristics and guide values
  • Part 2 calculation and measurement
• DIN 67526 sports facility lighting
  • Part 3 guidelines for daylight lighting
• DIN 67527 requirements for stationary signal lights in road traffic
  • Part 1 Fixed signal lights in road traffic
• DIN 67530 reflectometer as an aid for assessing the gloss of even painted and plastic surfaces
• DIN 67544 cylindrical masts for traffic lights; Dimensions
• DIN 68100 tolerance system for wood working and processing - terms, tolerance series, shrinkage and swelling dimensions
• DIN 68101 basic dimensions and tolerance zones for woodworking and processing
• DIN 68119 wood shingles
• DIN 68120 wooden profiles; basic forms
• DIN 68121 wooden profiles for windows and balcony doors
  • Part 1 dimensions, quality requirements
  • Part 2 General Principles
• DIN 68125
  • Part 1 Skirting boards made of European (except Nordic) woods
  • Part 2 skirting boards made of Nordic softwood
• DIN 68126 profile boards with shadow groove
  • Part 1 dimensions
• DIN 68127 acoustic boards
• DIN 68128 balcony boards
• DIN 68140 finger jointing of wood
  • Part 1 Finger joint connections of softwood for load-bearing components , withdrawn without replacement
• DIN 68141 wood adhesives - Determination of the open drying time and assessment of the wetting and brushability
• DIN 68150 wooden dowels
  • Part 1 dimensions, technical delivery conditions
• DIN 68163 fasteners for the production of wooden pallets; Nails
• DIN 68201 Loss of cuts in wood; Terms and calculation methods
• DIN 68255 lumber packaging
• DIN 68330 veneers; Terms
• DIN 68340 handles made of wood for striking tools; Technical delivery conditions
• DIN 68345 screw connection for handles and brooms; Threaded cap and threaded insert
• DIN 68346 brooms, brushes, paint brushes; Designation of cutlery materials
• DIN 68361 fruit tree ladders made of wood - dimensions, requirements and testing
• DIN 68362 wood for ladders and steps - quality conditions
• DIN 68363 fruit tree ladders made of aluminum - dimensions, requirements and testing
• DIN 68364 Characteristics of wood species - bulk density, modulus of elasticity and strength
• DIN 68365 sawn timber for carpentry work - sorting according to appearance - softwood
• DIN 68368 hardwood lumber for stair construction - quality conditions
• DIN 68501 furniture fittings - test method for determining the strength and rigidity of body corner connectors
• DIN 68601 wood glued joints - terms
• DIN 68702 wooden plaster
• DIN 68705 plywood
  • Part 2 Stick and stick plywood for general purposes
• DIN 68706 interior doors made of wood and wood materials
  • Part 1 door leaves; Terms, dimensions, requirements
  • Part 2 door frames; Terms, dimensions, installation
• DIN 68707 molded plywood and molded laminated wood for furniture - requirements for dimensions and quality features
• DIN 68740 panels
  • Part 1 Terms, designations
  • Part 2 veneer top layers on wood materials
• DIN 68762 chipboard for special purposes in construction; Terms, requirements, testing
• DIN 68764 chipboard; Extruded panels for the building industry
  • Part 1 Terms, properties, testing, monitoring , July 2007 withdrawn without replacement
  • Part 2 Planked extruded panels for panel construction , withdrawn in July 2007 without replacement
• DIN 68791 large-area formwork panels made of rod or stick plywood for concrete and reinforced concrete
• DIN 68792 large-area formwork panels made of veneer plywood for concrete and reinforced concrete
• DIN 68800 wood protection
  • Part 1 General
  • Part 2 Preventive structural measures in building construction
  • Part 3 Preventive protection of wood with wood preservatives
  • Part 4 Control and remedial measures against wood-destroying fungi and insects
  • Part 5 Preventive chemical protection of wood-based materials , replaced by DIN 68800-3
• DIN 68811 Impregnation of wooden railway sleepers with creosote (coal tar oil)
  • Correction 1
• DIN 68856 furniture locks and fittings - terms
  • Part 1 connecting fittings, shelf supports and coat hanger supports
  • Part 4 closures, holders, actuators
  • Part 5 base adjustment screws, feet, frames
  • Part 6 cabinet hanger
  • Part 7 handles, knobs, key plates, key sockets
  • Part 9 furniture casters and glides
• DIN 68858 furniture locks and fittings, pull-out guides, drawers and pull-outs, requirements and testing
• DIN 68861 furniture surfaces
  • Part 1: Behavior in the event of chemical exposure
  • Part 2: Behavior in case of abrasion
  • Part 4: Behavior in the event of scratching
  • Part 6: What to do if cigarette burns
  • Part 7: Behavior in dry heat
  • Part 8: Behavior in humid heat
• DIN 68871 furniture designations and their application
• DIN 68874 furniture shelves and shelf supports
  • Part 1 Requirements and testing in furniture
  • Part 2 Requirements and tests of the floor supports
• DIN 68876 housework swivel chair, height adjustable; Safety requirements, testing
• DIN 68877 industrial work chair
  • Part 1 dimensions, determination of dimensions
  • Part 2 safety requirements and test methods
• DIN 68878 chairs for the living area - functional properties - requirements and test methods
• DIN 68880 furniture
  • Part 1 terms
• DIN 68881 terms for kitchen furniture
  • Part 1 kitchen cabinets
• DIN 68885 tables for the living area - properties of use - requirements
• DIN 68888 Furniture for the living area - Upholstered furniture - Determination of the durability of the seat upholstery on furniture
• DIN 68890 wardrobes in living areas - requirements for usability - testing
• DIN 68902 kitchen equipment - hot water heaters; Terms
• DIN 68903 kitchen equipment; Household cookers, terms
• DIN 68904 kitchen equipment; Plumbing fixtures, terms
• DIN 68905 kitchen equipment; Ventilation devices, terms
• DIN 68906 kitchen equipment; Sinks, sinks, terms
• DIN 68930 kitchen furniture - usability - requirements and testing
• DIN 68935 coordination dimensions for bathroom furniture, devices and sanitary objects
• DIN 69001 machine tools; Multi-spindle heads
  • Part 1 General, overview, basics
  • Part 2 housing dimensions
  • Part 11 assemblies, drives form A to K
  • Part 12 assemblies intermediate shafts form A to P
  • Part 13 Assemblies drilling spindles form A to D
  • Part 14 assemblies spindle seals form A to D
  • Part 15 assemblies of thread tapping spindles form A
  • Part 16 assemblies spindle drives form A to F
  • Part 17 assemblies lubrication pumps form A
  • Part 18 assemblies, drilling spindles form E to K
  • Part 19 assemblies, spindle shafts form A to D
  • Part 20 assemblies, spindle heads form A
  • Part 21 assemblies, spindle seals form E to P
  • Part 30 drive shafts form A to F
  • Part 31 drive pinion form A
  • Part 32 intermediate shafts form A to G
  • Part 33 drilling spindles form A and B
  • Part 34 tapping spindles form A
  • Part 35 cover form A and B
  • Part 36 intermediate flanges form A and B
  • Part 37 machine tools; Multi-spindle heads; Form A and B bearing flanges
  • Part 38 retaining rings form A to D
  • Part 39 protection rings form A
  • Part 40 race rings form A to D
  • Part 41 guide sleeves form A
  • Part 42 drive sleeves form A
  • Part 43 pinion sleeves form A and B
  • Part 44 conical spring washers form A to D
  • Part 45 clamping pieces form A
  • Part 46 parallel keys form A
  • Part 47 spacer rings form A to E.
  • Part 48 fitting rings form A
  • Part 49 step rings form A and B
  • Part 50 spacer sleeves form A
  • Part 51 bearing bushes form A
  • Part 52 gears form A
  • Part 53 spindle shafts form A and B
  • Part 54 drilling spindles form C to H
  • Part 55 retaining rings form E to H
  • Part 56 spindle heads form A
• DIN 69002 machine tools - short spindles
  • Part 1 General, description, basics
  • Part 2 dimensions and parts lists, designation
  • Part 3 items
• DIN 69010 transfer centers - interface machine frame - multi-spindle heads and other structural units, sizes and dimensions
• DIN 69051 machine tools; Ball screws
  • Part 2 nominal diameter and nominal pitches
  • Part 5 connection dimensions for ball screw nuts
• DIN 69056 machine tools; Guide rails
  • Part 1 dimensions for rectangular cross-section, form A; Technical delivery conditions
• DIN 69063 machine tools - holders for hollow taper shanks
  • Part 1 For form A and form C according to DIN 69893, connection dimensions
  • Part 2 For form B and form D according to DIN 69893; Connection dimensions
  • Part 5 For form E according to DIN 69893-5; Connection dimensions
  • Part 6 For form F according to DIN 69893; Connection dimensions
• DIN 69090 MQL machining technology
  • Part 1 Terms and Definitions
  • Part 2 machine
  • Part 3 tools and tool systems
  • Part 4 tapping chucks and taps / grooves
• DIN 69170 mounted points
• DIN 69513 machine tools; Structural units, center units for rotary indexing table units, sizes
• DIN 69514 machine tools; Construction units, rotary indexing table units
  • Part 1 Form A and B, sizes
  • Part 2 form C; Sizes
• DIN 69521 machine tools; Structural units, center units for transfer machines, sizes
• DIN 69522 machine tools; Building units; Side units for stand units; Sizes
• DIN 69523 machine tools; Building units; Side units for slide units; Sizes
• DIN 69524 machine tools; Structural units, console units, sizes
• DIN 69525 machine tools; Building units; Stand units; Sizes
• DIN 69526 machine tools; Building units; Sled stand units; Sizes
• DIN 69572 machine tools; Building units; Slide units; Sizes
• DIN 69611 machine tools; Building units; Carrier units for multi-spindle heads according to DIN 69001; Connection dimensions
• DIN 69638 machine tools; Groove profiles and groove pitches; Dimensions
• DIN 69639 machine tools; Cams for actuating series position switches; Dimensions
• DIN 69641 machine tools; Building units; Drilling spindle units; Sizes
• DIN 69642 machine tools; Building units; Turning spindle units, sizes
• DIN 69643 machine tools; Building units; Milling spindle units; Sizes
• DIN 69718
  • Part 1 machine tools; External cylindrical grinding machines, terms and names
• DIN 69844 ANS end mill with straight shank
  • Part 1 dimensions
  • Part 2 Technical delivery conditions
• DIN 69864 mounting flanges for double-sided conical grinding wheels for hand grinding machines; Dimensions
• DIN 69871 steep taper shanks for automatic tool change
  • Part 1 Form A, Form AD, Form B and version with data carrier
• DIN 69872 pull studs for collet clamping
• DIN 69873 data carrier for tools and clamping tools; Dimensions for data carriers and their installation space
• DIN 69880 tool holder with straight shank
  • Part 1 overview of tool holders
    • Supplement 1 forms and accessories
  • Part 10 form AK; Axially coupled drive
  • Part 11 support for angle adjustment
• DIN 69881 tool holder with prism
  • Part 1 prism, prism holder; Technical delivery conditions
  • Part 2 form A with square transverse mount
  • Part 3 form B with square longitudinal seat
  • Part 4 Form C with multiple square mounts
  • Part 5 form D with cylinder holder
• DIN 69882 tool holder with tapered hollow shaft according to DIN 69893-1
  • Part 1 designation scheme, technical delivery conditions
  • Part 2 Form A, shell milling cutter arbor for milling cutters with longitudinal or transverse groove - dimensions
  • Part 3 Form B, shell milling cutter arbor with enlarged contact diameter for milling cutters with transverse groove - dimensions
  • Part 4 Form C, receptacle for cylindrical shanks with lateral driving surface - dimensions
  • Part 5 Form D, receptacle for cylindrical shanks with inclined clamping surface - dimensions
  • Part 6 Form E, chuck for collets with setting angle 8 ° - dimensions
  • Part 7 Form F, expansion chucks - dimensions
  • Part 8 form G, shrink fit chuck - dimensions
• DIN 69888 balancing requirements for rotating tool systems
• DIN 69890 modular tools; Cantilever length of the receiving modules
  • Part 1 mounting modules for spindle heads with steep taper 7: 24 according to DIN 2079
• DIN 69893 hollow taper shanks with flat contact
  • Part 1 conical hollow shafts form A and form C; Dimensions and execution
  • Part 2 conical hollow shafts form B; Dimensions and execution
  • Part 5 conical hollow shafts form E; Dimensions and execution
  • Part 6 conical hollow shafts form F; Dimensions and execution
  • Part 7 conical hollow shafts form T for standing tools; Dimensions and execution
• DIN 69894 Confusion protection for hollow taper shanks - form C, according to DIN 69893-1 and holders for hollow taper shanks - form C, according to DIN 69063-1: Dimensions
• DIN 69895 Central cooling lubricant supply for the HSK - cooling lubricant tube with threaded bush for hollow tapered shanks, form A according to DIN 69893-1 and form E according to DIN 69893-5 - dimensions
• DIN 69900 project management - network plan technology; Descriptions and terms
• DIN 69901 project management - project management systems
  • Part 1 basics
  • Part 2 processes, process model
  • Part 3 methods
  • Part 4 data, data model
  • Part 5 terms
• DIN 69905 project management - project management - terms , replaced by DIN 69901-1, DIN 69901-5
• DIN 69909 multi-project management - management of project portfolios, programs and projects
  • Part 1 basics
  • Part 2 processes, process model
  • Part 3 methods
  • Part 4 roles

DIN 70000–99999

• DIN 70000 road vehicles; Vehicle dynamics and driving behavior; Terms
• DIN 70003 vibration stress; Measurement of parameters on motor vehicle components
• DIN 70005 motor vehicles
  • Part 1 Graphic symbols for control devices and tachographs
• DIN 70006 safety and information signs for vehicles
  • Part 1 Safety and information signs for commercial vehicles
• DIN 70010 system of road vehicles; Terms for motor vehicles, vehicle combinations and trailers
• DIN 70011 superstructures for passenger cars; Names and terms
• DIN 70014 vehicles for the transport of swap bodies
  • Part 1 connection dimensions
• DIN 70019 locking devices for swap bodies and inland containers; Minimum requirements
• DIN 70020 road vehicles; Automotive engineering
  • Part 1: Road vehicles, automotive engineering; Concepts of dimensions
  • Part 2: Weights , withdrawn without replacement in January 2006
  • Part 3: Test conditions, maximum speed, acceleration and elasticity, mass, terms, miscellaneous
  • Part 5: Tires and wheels, terms and measurement conditions
  • Part 6: Services , replaced by DIN ISO 1585 in April 1997
  • Part 7: Motor mass of internal combustion engines in passenger cars that are powered exclusively by internal combustion engines
• DIN 70024 Terms for individual parts of motor vehicles and their trailers
  • Part 1 control devices, display and control devices
  • Part 3 braking equipment
    • Supplement 1 translations
• DIN 70027 road vehicles; Wheel alignment; Chassis data to be given, measurement conditions
• DIN 70028 Passenger Cars - Measurement of the braking distance with ABS braking straight ahead
• DIN 70030 motor vehicles; Determination of fuel consumption
  • Part 1 passenger cars , withdrawn in May 1998
  • Part 2 trucks and buses
• DIN 70070 diesel engines - NOx reducing agent AUS 32 - Quality requirements
• DIN 70073 road vehicles - Stability of vehicles with tipping bodies - Air-sprung semitrailers with rear tipper body
• DIN 70810 nut holder for square nuts,
  • Part 1 open
  • Part 2 closed
• DIN 70852 locknuts; Dimensions
• DIN 70907 piston rings for mechanical engineering; Examination of the quality features; Terms, methods of measurement; Supplements to DIN ISO 6621 Part 2
• DIN 70908 piston rings for mechanical engineering; Quality conditions; Visual features, marking; Supplements to DIN ISO 6621 Part 5
• DIN 70952 locking washers for locknuts according to DIN 70852
• DIN 71401
  • Part 1 drain cocks for internal combustion engines (not for new designs)
  • Part 2 drain valves for internal combustion engines
• DIN 71405 hissing valves, hissing taps; Connection dimensions; Automotive engineering
• DIN 71412 conical grease nipple (formerly conical bead lubrication heads)
• DIN 71420 central lubrication; Overview
• DIN 71428 Solderless pipe fittings with double cone ring; Screw-in socket with cylindrical screw-in thread for union screws
• DIN 71429 Solderless pipe fittings with double cone ring; Bulkhead connector; Straight and angled bulkheads for union screws
• DIN 71430 Solderless pipe fittings with double cone ring; Swivel screw connections for union screws
• DIN 71433 Solderless pipe fittings with double cone ring; T-pieces and elbows for union screws
• DIN 71436 Solderless pipe fittings with double cone ring; Banjo bolts and ring connectors for union bolts
• DIN 71450 filters for motor vehicles and internal combustion engines
  • Part 1 Terms for filters and components
• DIN 71457 spin-on oil filter
• DIN 71459 filter elements for air filters in commercial vehicles; Dimensions
• DIN 71460 road vehicles - air filters for motor vehicle interiors
  • Part 1 test method for particle filtration
• DIN 71501 oval flanges for motor vehicles
• DIN 71511 seals for oval flanges
• DIN 71555 motor vehicles - pipe clamps for exhaust systems
• DIN 71752 fork joints ; Clevises
• DIN 71802 angle joints with or without safety clips
• DIN 71803 angle joints; Ball stud with threaded stud, with rivet stud
• DIN 71805 angle joints; Ball sockets, safety clips
• DIN 71984 cables
  • Part 1 round strand rope 7 × 7
  • Part 2 round strand 1 × 19
  • Part 3 rope covers
  • Part 4 pods
• DIN 71985 nipples for cables
  • Part 1 mounting nipple
  • Part 2 solder nipple
  • Part 3 clamp nipple
  • Part 4 compression nipple
• DIN 71986 cables; Overview, application examples
• DIN 71989 adjusting screws for cables
• DIN 71990 cables; Inner tubes for rope covers
• DIN 71991 end pieces with thread for cables
• DIN 71992 eyelets for cables
• DIN 72311 lead accumulators
  • Part 1 starter batteries for motorcycles, nominal capacities, main dimensions
• DIN 72331 battery terminals for starter batteries
  • Part 1 screw terminals for conductor cross-sections up to 70 mm²
  • Part 2 screw terminals for conductor cross-sections from 50 to 120 mm²
• DIN 72332 battery terminals for starter batteries
  • Part 1 solder clamps
  • Part 2 Light soldering clips
• DIN 72333 battery terminals for starter batteries
  • Part 1 tape clamps
  • Part 2 clamps with ground strap
  • Part 3 ground strap, ground connector
  • Part 4 Light band clamps
• DIN 72535 high voltage connection for ignition coils and ignition distributors
• DIN 72536 screw connection, water-protected for the connection of shielded high-voltage ignition cables
• DIN 72537 road vehicles; Noise filter; Attachment and connection dimensions
• DIN 72550 Unshielded complete high-voltage ignition cables; General requirements and tests
• DIN 72551 road vehicles - low voltage lines
  • Part 7 colors and color coding of cores for low voltage lines
• DIN 72552 terminal designation in motor vehicles
  • Part 1 Purpose, principles, requirements
  • Part 2 meanings
  • Part 3 application examples in connection plans
  • Part 4 overview
  • Part 5 system and function names , (withdrawn draft)
• DIN 72609 surface-mounted headlights; with spherical foot and clip-on foot
• DIN 72616 reflector
• DIN 72553 jump starter cables for road vehicles with internal combustion engines; Dimensions, requirements, testing
• DIN 72557 road vehicles; Partly shielded spark plug connector; Insertion and withdrawal forces; Requirements and testing
• DIN 72570 road vehicles; Electrical connection between towing vehicles and towed vehicles: 12 V version, dimensions, contact arrangement. Status: withdrawn
• DIN 72571 fastening clips - one-sided fastening
• DIN 72572 fastening clips - central fastening for 2 lines
• DIN 72573 fastening clips - two-sided fastening
• DIN 72581 road vehicles; Fuses for low voltage systems
  • Part 1 fuse links
  • Part 2 security strips
• DIN 72582 road vehicles; Fuses for low voltage systems; Fuse boxes
• DIN 72586 motor vehicles; Line connector for nominal system voltages up to 24 V.
• DIN 72588 road vehicles - crimp sleeves for processing low-voltage cables with thin-walled insulation with hand crimping tools
• DIN 72594 road vehicles - 50 Ohm high frequency interface (50 Ω HFSSt)
  • Part 2 exams
• DIN 72601
  • Part 7 motor vehicle light bulbs, with two illuminants, for signal lights
• DIN 72616 round reflectors
• DIN 72701 horns
• DIN 72651 road vehicles - micro-relays - dimensions, pin assignment
• DIN 72701 acoustic signal generator; Impact horns for low voltages
• DIN 72703 Electromagnetic fanfares for low voltages
• DIN 72758 dimmer switch
  • Part 1 Electric dimmer switch; with and without horn button for motorbikes and motorcycles (invalid)
  • Part 2 Mechanical dimmer switch; with and without horn button for motorbikes and motorcycles (invalid)
  • Part 3 foot dimmer switch for screwing on and under (invalid)
• DIN 72759 brake light switch
  • Part 1 brake light rotary switch . (invalid)
  • Part 2 brake light switch, mechanical, up to 24 V nominal voltage
  • Part 3 hydraulic brake light switch . withdrawn September 1990 (invalid)
  • Part 5 brake light switch, pneumatic
  • Part 6 brake light switch, hydraulic with metric ISO thread M12 × 1
• DIN 72761 switch for general use
  • Part 1 pull switch up to 24 V nominal voltage
  • Part 2 toggle switch up to 24 V nominal voltage
• DIN 72763 Combined start switch
  • Part 1 glow starter switch with twist grip, up to 24 V nominal voltage
• DIN 72764
  • Part 1 push button switch, single pole, up to 24 V nominal voltage
• DIN 72781 wiper systems for road vehicles
  • Part 1 designations
  • Part 2 wiper motors; Terms, requirements, tests
• DIN 72782 windshield wiper systems for motor vehicles
  • Part 1 wiper motors, rotary runner with spur gear
  • Part 3 wiper motors, rotary with worm gear
• DIN 72783 windshield wiper systems for road vehicles - knurled cone fastenings
• DIN 72784 windshield wiper systems for motor vehicles; Bearing bushes for wiper bearings
• DIN 72785 windshield wiper systems for motor vehicles; Ball joints
• DIN 72786 windshield wiper systems for motor vehicles - wiper levers
  • Part 1 wiper blades form A for hook mounting
  • Part 2 wiper blades form C for screw mounting
  • Part 3 wiper rod bands
• DIN 73001 Operation of vehicles with internal combustion engines
• DIN 73011 motor vehicles; Gear arrangements for change gearboxes for cars
• DIN 73021 designation of the direction of rotation, the cylinders and the ignition cables of motor vehicle engines
• DIN 73126 piston pin for reciprocating piston machines; Dimensions, designs, requirements, tests
• DIN 73130 snap rings made of round wire for piston pins
• DIN 73353 wet air filter with cylindrical connection
• DIN 73357 fuel filters for diesel engines - filter heads for spin-on filters - installation and connection dimensions for flat and angled flange mounting
• DIN 73358 fuel filters for diesel engines
  • Part 1 form A, connections on the housing
  • Part 2 filter inserts
  • Part 3 form B; Connections on the lid
• DIN 73360 fuel switchover filter for diesel engines, form A, connections on the housing
• DIN 73365 injection pumps for diesel engines
  • Part 3 pressure pipe connections
• DIN 73368 overflow valves and banjo bolt for fuel injection systems
• DIN 73372 injection nozzles, size T and U
• DIN 73377 connecting parts for pipes made of polyamide; Thorn profiles
• DIN 73378 pipes made of polyamide for motor vehicles
• DIN 73379 road vehicles - fuel hoses
• DIN 73388 fuel hose lines - functional requirements
• DIN 73400 motor vehicles; Bayonet locks; Dimensions
• DIN 73411 coolant lines in motor vehicles - hoses and hose bends
  • Part 1 dimensions, materials, marking
  • Part 2 requirements, testing
• DIN 73451 clutch linings - limit dimensions
• DIN 74000 hydraulic braking systems; Dual circuit braking systems; Abbreviation for the brake circuit allocation
• DIN 74001 road vehicles; Connection of automatic blocking preventers (ABV) in trains; conditions
• DIN 74040 Mechanical connections for motor vehicles and trailers; Drawbars, connection dimensions
• DIN 74050 Mechanical connections for motor vehicles and their trailers; Measures for interchangeability in cross-border traffic
• DIN 74051 Mechanical connections for motor vehicles and trailers; Automatic pin couplings 40
  • Part 1 dimensions and calculated values
• DIN 74052 Mechanical connections for motor vehicles and trailers; Automatic pin couplings 50
  • Part 1 dimensions and calculated values
• DIN 74053 mechanical connections for motor vehicles and trailers - towing eye 50
  • Part 1 with socket
• DIN 74054 Mechanical connections for motor vehicles and trailers; Towing eye 40
  • Part 1 with socket
  • Part 2 without socket, dimensions
• DIN 74056 towing couplings; Connection dimensions, locking bolts and safety device
• DIN 74058 coupling ball; Dimensions, free spaces
• DIN 74060 compressed air brake systems; Air cylinder
  • Part 1 membrane cylinder; Characteristics
  • Part 2 membrane cylinder; Characteristic data for expanding wedge brake
  • Part 3 membrane cylinder; Characteristics for disc brakes
  • Part 10 membrane cylinder; Method of measuring the force output over the stroke
• DIN 74064 road vehicles; Trailers; Position of the coupling point
• DIN 74068 nationality plate (D plate) for motor vehicles
• DIN 74069 Retroreflective license plates, stamp badges and badge carriers for motor vehicles and their trailers
• DIN 74074 saddlecloths
  • Part 1 saddle blankets for motorcycles
  • Part 2 saddle covers for driver and passenger saddles for motorcycles
• DIN 74075 hydraulic couplings on trucks and tractor units
  • Part 1 arrangement of the hydraulic couplings
• DIN 74080 Mechanical connections for articulated vehicles; Kingpin 50; Functional and installation dimensions, requirements
• DIN 74081 Mechanical connections for articulated vehicles; Fifth wheel 50; Dimensions, requirements
• DIN 74083 Mechanical connections for articulated vehicles; Kingpin 90; Functional and installation dimensions, requirements
• DIN 74084 Mechanical connections for articulated vehicles; Fifth wheel 90; Dimensions, requirements
• DIN 74085 Mechanical connections for articulated vehicles; Sprung steering wedge; Dimensions, requirements
• DIN 74086 road vehicles - Static vertical load for trailer operation
• DIN 74087 road vehicles - Stabilization devices for center axle trailers - Effectiveness requirements
• DIN 74101
  • Part 2 steering wheels for commercial vehicles with recess for horn push button
• DIN 74200 hydraulic brake systems; Cylinder; Dimensions, installation
• DIN 74225 hydraulic brake systems; Brake hose lines, brake hose fittings and brake hose line holders
• DIN 74233 hydraulic brake systems; Brake pipe fittings
  • Part 1 union screws for brake tubes
  • Part 2 union nuts for brake tubes
• DIN 74234 hydraulic brake systems; Brake pipes, flanges
• DIN 74235 hydraulic brake systems; Threaded holes
• DIN 74253 brake equipment for motor vehicles and trailers; Graphic symbols for brake circuit diagrams
• DIN 74255 trailer vehicles - Graphic symbols for operating elements
• DIN 74267 compressed air brake systems; Signs for automatic load-dependent braking force control device (ALB)
• DIN 74279 compressed air brake systems - overflow valves
• DIN 74280 compressed air brake systems - check valve
• DIN 74281 compressed air brake systems - pressure vessels
  • Part 1 Dimensions for welded single-chamber pressure vessels made of steel and aluminum
• DIN 74286 compressed air brake systems; Sealing rings for coupling heads for two-line compressed air brake systems
• DIN 74304 Solderless pipe fittings; Hose connector
• DIN 74305 solderless pipe fittings
  • Part 1 banjo bolt
• DIN 74310 compressed air brake systems; Hoses
  • Part 1 dimensions, material, marking
  • Part 2 requirements, tests
• DIN 74313 Solderless pipe fittings
  • Part 1 straight socket, form A and B
  • Part 2 Straight nozzle, form C and D
• DIN 74315 Solderless pipe fittings - elbow connectors
• DIN 74317 Solderless pipe fittings - T-connector
• DIN 74319 Solderless pipe fittings - cross connector
• DIN 74322 axles for trailers; Main and connection dimensions
• DIN 74323 compressed air brake systems; Coiled tubing
• DIN 74324 Compressed air brake systems - Pipes and pipes made of polyamide
  • Part 1 requirements and tests
• DIN 74325 compressed air brake systems; Hose connections; Shapes, dimensions
• DIN 74326 compressed air brake systems; Test connection; Connection dimensions
• DIN 74341 compressed air brake systems; Shuttle valve with backflow
• DIN 74344 compressed air brake systems - empty clutch
• DIN 74347 air brake systems - line filters
• DIN 74361 disc wheels for motor vehicles and trailers
  • Part 1 connection dimensions for bolt and mixed centering
  • Part 2 fasteners for bolt centering
  • Part 3 connection dimensions and fastening elements for centering
• DIN 74362 brake drums for disc wheels
  • Part 1 of load trailers and bus trailers with press-in depth and 8-bolt fastening; maximum outer contour
  • Part 2 of load trailers and bus trailers with press-in depth and 10-bolt fastening; maximum outer contour
  • Part 3 of load trailers and bus trailers without press-in depth and with 8- or 10-bolt fastening; maximum outer contour
  • Part 4 of commercial vehicles with press-in depth and 8-bolt fastening; maximum outer contour
  • Part 5 of commercial vehicles with press-in depth and 10-bolt fastening; maximum outer contour
  • Part 6 of commercial vehicles without press-in depth and with 8- or 10-bolt fastening; maximum outer contour
  • Part 7 of commercial vehicles without press-in depth and with 8- or 10-bolt fastening; maximum outer contour
  • Part 8 with rim diameter designation 15 with press-in depth and with 6- or 10-bolt fastening; maximum outer contour
  • Part 10 with steep shoulder rims of commercial vehicles and their trailers, with press-in depth and 10-bolt fastening; maximum outer contour
• DIN 74363 brake drums for trailers of passenger cars
  • Part 1 with wheel connection BZ 5 × 112; maximum outer contour
  • Part 2 with wheel connection BZ 5 × 120; maximum outer contour
• DIN 75001 application classes for measuring devices in motor vehicles
• DIN 75012 road tanker - direction finding device - connection dimensions
• DIN 75013 road tanker - grounding strap - connection dimensions
• DIN 75076 rescue systems - intensive care transport vehicles (ITW) - terms, requirements, testing
• DIN 75078 motor vehicles for the transport of people with reduced mobility
  • Part 1 Terms, requirements, testing
    • Correction 1
  • Part 2 restraint systems; Terms, requirements, testing
• DIN 74704 snake valve body
• DIN 75079 Emergency doctor vehicles (NEF) - terms, requirements, testing
• DIN 75081 hearse (BKW)
• DIN 75200 Determination of the burning behavior of materials used in motor vehicle interiors
• DIN 75201 Determination of the fogging behavior of materials used in motor vehicle interiors
• DIN 75203 Fully automatic central lubrication system for commercial vehicles
• DIN 75204 road vehicles; Traffic accident reconstruction and injury mechanics
  • Supplement 1 index
  • Part 1 Terms of accident reconstruction
  • Part 2 Terms to trace types and trace characteristics
  • Part 3 characteristics for data collection
• DIN 75220 Aging of motor vehicle components in solar simulation systems
• DIN 75302 roof rack for passenger cars; Safety requirements, tests
• DIN 75400 locking devices of seat belts in motor vehicles
• DIN 75405 fire extinguisher brackets for passenger cars; Requirements, tests
• DIN 75406 holders for first aid material in passenger cars; Requirements, tests
• DIN 75407 warning triangle brackets in passenger cars; Requirements, tests
• DIN 75410 load securing on road vehicles
  • Part 1 lashing points on commercial vehicles for the transport of goods with a permissible total weight of up to 3.5 t; Minimum requirements
• DIN 75501 instrument panel measuring devices for motor vehicles; Mounting diameter
• DIN 75521
  • Part 1 speedometer for installation in headlights for motorcycles
  • Part 2 speedometer for installation in instrument panels for motor vehicles
• DIN 75551 pressure gauges for motor vehicles
• DIN 75553 pressure transducer
• DIN 75554 pressure indicator
• DIN 75575 remote thermometer for motor vehicles
• DIN 76033 tow ropes for passenger cars; Requirements, testing, monitoring
  • Correction 1
• DIN 76051
  • Part 1 wheel chocks for motor vehicles and trailers
  • Part 2 wheel chocks for agricultural vehicles; Functional dimensions
• DIN 76722 Road vehicles - Electrical cables - Rule for the structure of the abbreviations
• DIN 77001 Tourism Services - Abbreviations in travel catalogs
• DIN 77100 patent valuation - principles of monetary patent valuation
• DIN 77200 security services - requirements
• DIN 77230 basic financial analysis for private households
• DIN 77400 cleaning services - school buildings - requirements for cleaning
• DIN 77600 Cosmetic services in perfumeries
• DIN 77700 income tax assistance services
• DIN 77800 quality requirements for providers of assisted living for older people
• DIN 78001 rims; Test rings for adjusting rim gauges
• DIN 78022 steep shoulder rims for commercial vehicles and their trailers
  • Part 1 drop center rims
• DIN 78026 valves for tubeless vehicle tires; Straight valve with metal base, for water filling
• DIN 78027 valves for tubeless vehicle tires; Valves for steep shoulder rims, straight and angled
• DIN 78028 valves for vehicle hoses; 60 ° angled valve with rubber base for bicycle tubes
• DIN 78030 valves for vehicle tires
  • Part 1 Requirements and testing of rubber parts
• DIN 78051 high speed test of passenger car tires
• DIN 78081 raw materials of the rubber industry; Furnace blacks
  • Part 1 Distinguishing Properties
  • Part 2 requirements
• DIN 78082 raw materials of the rubber industry; Styrene-butadiene rubbers
  • Part 1 Distinguishing Properties
• DIN 79001 climbing walls for use in the water area of ​​publicly used swimming pools - safety and operational requirements for the place of use
• DIN 79002 detection and alarm systems for underwater emergencies in swimming pools - safety requirements and test methods
• DIN 79003 unicycles - Safety requirements and test methods
• DIN 79004 Athletics - Vertical jumping disciplines
  • Part 1 Requirements and test methods for pole vault
  • Part 2 requirements and test methods for high jump
• DIN 79005 Athletics - Horizontal jumping disciplines - Requirements and test methods for long and triple jump
• DIN 79008 stationary bicycle parking systems
  • Part 1 requirements
  • Part 2 test method
• DIN 79012 threads for bicycles and mopeds - Theoretical values, thread limit dimensions
• DIN 79016 hiking, trekking, walking and touring ski poles - requirements and test methods
• DIN 79105 BMX bicycles; Terms, safety requirements, tests
• DIN 79161 playground examination - qualification of playground examiners
  • Part 1 education and training
  • Part 2 exam and proof of qualification
• DIN 79400 Slackline Systems - General and safety requirements and test methods
• DIN 80000 inland navigation vehicles - safety role and safety plan for passenger ships
  • Supplement 1 examples
• DIN 80002 Ships and marine technology - general plans for ships
  • Part 1 requirements, execution
    • Supplement 1 Example of a bulk carrier
    • Supplement 2 Example of a container ship
    • Supplement 3 Example of a multi-purpose cargo ship
    • Supplement 4 Example Ro / Ro ship
    • Supplement 5 Example passenger ship (ferry ships analogously)
    • Supplement 6 ships of the Bundeswehr, example frigate
    • Supplement 7 Example underwater vehicle
    • Supplement 8 Example of a barge
  • Part 2 Graphic symbols (ISO 1964: 1987, modified)
• DIN 80004 Shipbuilding terms and abbreviations in German and English
• DIN 80006 Ships and marine technology - tug pressure points - symbols and arrangement
• DIN 80010 screen displays ship technology
  • Part 1 color selection, color assignment, design principles
  • Part 2 Graphic symbols
  • Part 3 operating states, alarms, acknowledgments
    • Supplement 1 Examples of screen displays
• DIN 80103 Inland navigation vehicles - minimum requirements for apartments
• DIN 80200 steel components for shipbuilding - Abbreviations for surface preparations, production coatings and base coatings
• DIN 80402 safety chains
  • Part 1 chains for securing small parts
  • Part 2 chains to shut off
• DIN 80403 socket pin
  • Part 1 compilation
  • Part 2 items
• DIN 80701 tommy nuts
• DIN 80704 basket nuts; Metric thread
• DIN 80705 Flat nuts with small wrench sizes; Regular thread, fine thread
• DIN 81208 maneuvering of ships
  • Part 1: General terms, sizes and test conditions
  • Part 2: attempt to run out
  • Part 3: Decay test
  • Part 4: Acceleration attempt
  • Part 5: turning circle test
  • Part 6: attempting to turn from a standstill
  • Part 7: attempting to reverse
  • Part 8: snake test (Z test)
  • Part 9: Sinus test
  • Part 10: Bech's spiral experiment
  • Part 11: Dieudonné spiral experiment
  • Part 12: Stop attempt
  • Part 13: Traversing attempt
  • Part 14: Wedel test; Text in German and English
  • Part 15: Meander attempt
  • Part 16: overshoot test in the vertical plane
  • Part 17: Experiment to determine the lift and torque-free travel
  • Part 18: Attempt to determine the critical speed
  • Part 23: Rotation experiment with spotlights
  • Part 24: Attempt to change course
  • Part 25: Evasion attempt
  • Part 26: Person Overboard Attempt
• DIN 81209 Geometry and stability of ships - symbols, names, definitions
  • Part 1 General, surface monohull ships
  • Part 2 submarines
  • Part 3 surface multihull ships
  • Part 6 sailing ships
• DIN 81249 Corrosion of metals in sea water and sea atmosphere
  • Part 1 terms, basics; Text in German and English
  • Part 2 Free corrosion in sea water; Text in German and English
  • Part 3 Contact corrosion in sea water; Text in German and English
  • Part 4 corrosion in sea atmosphere; Text in German and English
• DIN 81300 door locks for shipbuilding
  • Part 1 Technical overview
  • Part 2 Technical delivery conditions
  • Part 3 dimensions and installation
• DIN 81301 mortise locks with latch for hinged doors on ships
• DIN 81302 mortise locks without latch for hinged doors on ships
• DIN 81303 mortise locks for toilet and bathroom flap doors on ships
• DIN 81304 mortise locks for sliding doors on ships
• DIN 81305 mortise locks for swing doors on ships
• DIN 81306 mortise locks without bolts for hinged doors on ships
• DIN 81307 box locks with latch for hinged doors on ships
• DIN 81308 box locks without latch for hinged doors on ships
• DIN 81309 box locks with latch for toilet and bathroom flap doors on ships
• DIN 81310 box locks with hook latch for sliding doors on ships
• DIN 81311 box locks with latch for heavy ship doors
• DIN 81312 box locks without latch for heavy ship doors
• DIN 81313 Chubb key for door locks on ships
• DIN 81314 striking plates, locking brackets for door locks on ships
• DIN 81315 lock boxes for door locks on ships
• DIN 81316 door plates for handles and keys for door locks on ships
• DIN 81317 lever handles for swing doors to door locks on ships
• DIN 81318 lever handles for sliding doors to door locks on ships
• DIN 81319 locking hook for flap doors with mortise lock
• DIN 81320 quarter turn for flaps in aisles
• DIN 81321 hinge locks (ambushed)
• DIN 81401 hangers and hinges - For screwing on for ship chamber doors
• DIN 81402 hangers and hinges - For screwing on furniture doors
• DIN 81403 flap hinges
• DIN 81404 hook clips for hooks
• DIN 81405 door hook and associated eyelet
• DIN 81406 drop hook for swing doors
• DIN 81407 coat hooks, curtain hooks and towel hooks
• DIN 81408 screw-in hook
• DIN 81409 door clips
• DIN 81410 bolt bolt - rough version made of steel
• DIN 81411 bolt bolt - light, fine design
• DIN 81412 flat bolt - light (furniture bolt)
• DIN 81415 quarter turn for facilities
• DIN 81416 reamers, light, for institutions
• DIN 81419 holder for curtain rods
• DIN 81421 bow handles for equipment
  • Part 1 to screw on
  • Part 2 for welding
• DIN 81612 round ship windows - very light construction (skylight window) - to screw on, not to open
• DIN 81660 shipbuilding and marine technology - transparent windows (ISO 3904: 1990 modified)
• DIN 81698 eye bolts with small eye, thread M20
• DIN 81701 inland navigation vehicles - handrail supports and holders for foldable and detachable handrails
• DIN 81702 Fixed railing on deck for seagoing vessels
• DIN 81703 railing gates in fixed railings on deck of seagoing vessels
• DIN 81704 handrails on superstructures and deckhouses on ships
• DIN 81705 Removable railings for seagoing vessels
• DIN 81706 Fixed railings on deck of seagoing passenger ships
• DIN 81709 sealing plug for pipe ends of railings
• DIN 81833 Components of the anchor device - overview; Text in German and English
• DIN 81834 components of the anchor device - terms
• DIN 81835 anchor chains - calculation bases
• DIN 81835 anchor bar chains - calculation bases
  • Part 100 Explanations of the nominal dimensions of individual parts of anchor bar chains
• DIN 81841 anchor bar chains - quality grade K4 - requirements and tests; Text in German and English
• DIN 81842 anchor bar chains, quality grade K4 - assignment of the nominal thickness to the equipment code; Text in German and English
• DIN 81846 anchor bar chains, quality grade K4 - composition, test and breaking forces
  • Part 1 Form A with precursor; Text in German and English
  • Part 2 form B without precursor; Text in German and English
• DIN 81847 anchor bar chains, quality grade K4 - chain lengths; Text in German and English
• DIN 81848 anchor bar chains, quality grade K4 - normal links; Text in German and English
• DIN 81849 anchor bar chains, quality grade K4 - transition links; Text in German and English
• DIN 81850 anchor bar chains, quality grade K4 - end links; Text in German and English
• DIN 81851 anchor bar chains, quality grade K4 - Kenter connection shackle; Text in German and English
• DIN 81852 anchor bar chains, quality grade K4 - bolt-anchor-shackle; Text in German and English
• DIN 81853 anchor bar chains, quality grade K4 - swivel shackles; Text in German and English
• DIN 81854 anchor bar chains, quality grade K4 - three-link ends; Text in German and English
• DIN 81855 anchor bar chains, quality grade K4 - forerunner; Text in German and English
• DIN 81856 anchor bar chains, quality grade K4 - slipstopper; Text in German and English
• DIN 81857 anchor bar chains, quality grade K4 - large end links; Text in German and English
• DIN 81858 anchor bar chains, quality grade K4 - forerunner chain locks; Text in German and English
• DIN 81859 anchor bar chains, quality grade K4 - lashing links; Text in German and English
• DIN 81860 end fastenings for anchor chains on ships
  • Part 1 compilation
  • Part 2 items
• DIN 81901 standard guide rollers
• DIN 81902 roller bushes
• DIN 81906 mooring rollers
• DIN 81907 mooring rollers with base
• DIN 81915 multipurpose hawks
• DIN 82003 shipbuilding - individual parts for lifting, towing and lashing
  • Part 1 overview
  • Part 2 Technical delivery conditions
• DIN 82004 turnbuckles with long eyes, forks and round eyes
  • Part 1 Unalloyed quality steel
  • Part 2 Stainless steel
• DIN 82006 long eyes with threaded shaft
  • Part 1 For swivels and turnbuckles, unalloyed quality steel
  • Part 2 For turnbuckles, stainless steel
• DIN 82008 forks with threaded shaft
  • Part 1 For swivels and turnbuckles, unalloyed quality steel
  • Part 2 For turnbuckles, stainless steel
• DIN 82010 round eyes with threaded shaft
  • Part 1 For swivels and turnbuckles, unalloyed quality steel
  • Part 2 For turnbuckles, stainless steel
• DIN 82013 loading gear - accessories and fittings for lifting - round nuts
• DIN 82016 loading gear - accessories and fittings for lifting and lashing - loading shackles
• DIN 82017 loading gear - accessories and fittings for lifting - loading hooks
• DIN 82018 loading gear - accessories and fittings for lifting - loading hook swivel
• DIN 82019 loading gear - accessories and fittings for lifting - double hooks with thread, with fork, with round eye
• DIN 82024 eye plates with round hole
• DIN 82048 cross block for hanger block
• DIN 82056 round steel chains - hanger chains
• DIN 82101 individual parts for lifting, hauling, lashing - shackles, straight - unalloyed quality steel
  • Correction 1
• DIN 82102 individual parts for lifting, towing, lashing - shackles, straight - stainless steels
• DIN 82103 individual parts for lifting, towing, lashing - shackles, curved - stainless steels
• DIN 82320 Air conditioning and ventilation systems on ships - Technical delivery conditions
• DIN 82325 Ships and marine technology - Design of air conditioning and ventilation systems for accommodation rooms on ships
• DIN 82330 ventilation systems on ships - round flanges DN 100 to DN 1800
• DIN 82331 ventilation systems on ships - flat seals for round flanges according to DIN 82330
• DIN 82340 ventilation systems on ships - gooseneck fans
• DIN 82341 ventilation systems on ships - hood fan heads
• DIN 82342 ventilation systems on ships - nozzle fan heads
• DIN 82602 double bollard with base plate
• DIN 82603 double cross bollard with base plate
• DIN 82604 cross bollard
• DIN 82607 double bollard
• DIN 83100 heavy ship doors
  • Part 1 Weatherproof (ISO type)
  • Part 2 Not weatherproof
  • Part 3 doors made of steel
• DIN 83104 quarter turn locks for heavy ship doors and hatch covers
• DIN 83105 hangings for heavy ship doors
• DIN 83106 profile seals for heavy ship doors and hatches
• DIN 83200 fixed ladders on ships - installation
• DIN 83202 fixed ladders on ships
  • Part 1 Light construction
  • Part 2 Medium heavy construction
  • Part 3 Heavy construction
  • Part 4 holder
  • Part 5 fixed ladders with rungs made of perforated sheets
• DIN 83204 Stairs and handrails in engine rooms and boiler rooms of seagoing vessels - Basic requirements
• DIN 83205 stairs and handrails in machine rooms and boiler rooms of seagoing ships - handrails
• DIN 83206 stairs and handrails in engine rooms and boiler rooms of seagoing ships - stairs
• DIN 83208 Stairs and handrails in engine rooms and boiler rooms of seagoing vessels - protective sheets
• DIN 83209 handrails and foot rails on masts, posts and walls on ships
• DIN 83212 swimming pools on ships - pool ladder
  • Part 1 Safety requirements and installation
  • Part 2 items and testing
• DIN 83213 appearances on bulwark
• DIN 83214 stairs and banisters for the outside and inside of seagoing vessels - basic requirements
• DIN 83215 stairs and banisters for the outside and inside of seagoing vessels - stairs
• DIN 83216 stairs and banisters for the exterior and interior of seagoing vessels - banisters
• DIN 83217 Stairs and railings in cargo tanks of ships - basic requirements
• DIN 83218 stairs made of steel in cargo tanks of ships
• DIN 83219 riser openings in chain cases
• DIN 83220 floors for machine and boiler rooms in ships
  • Part 1 hall floors
  • Part 2 intermediate floors
• DIN 83221 walkways for machine and boiler rooms in ships
• DIN 83222 flap with hinge for hall floors, intermediate floors and walkways
• DIN 83223 panels made of teardrop plate, sheet metal profile gratings or gratings for corridor floors and walkways
• DIN 83224 resting platforms on ladders on ships
• DIN 83225 retaining bracket on ladders on ships
• DIN 83226 add-on stages on ships
• DIN 83227 stairs on seagoing ships - steps
• DIN 83307 Ships and marine technology - Round and spiral-braided synthetic fiber ropes
• DIN 83319 fiber ropes - splices - terms, safety requirements, testing
• DIN 83329 Ships and marine technology - Polypropylene fiber ropes made from yarns using the bast fiber spinning process
• DIN 83402 manhole closures of nominal size 600 × 400 for pressures up to 1.1 bar or 3 bar
  • Part 1 compilation, installation
  • Part 2 frame, cover
• DIN 83403 manhole closures for bunkers and tanks on ships - seals
• DIN 83404 small ship hatches
  • Part 1 Compilation of the weathertight ship hatches, safety specifications
  • Part 2 Weatherproof coaming
  • Part 3 Weatherproof lids
  • Part 11 Compilation of the non-weathertight ship hatches, safety specifications
  • Part 12 Non-weatherproof coaming
  • Part 13 Not weatherproof lids
• DIN 83405 locking devices for hatch covers of small ship hatches
• DIN 83406 hinges for marine equipment
  • Part 1 Short design
  • Part 2 Long design
• DIN 83407 fasteners and pressure forks for ship equipment
• DIN 83408 flaps, weatherproof
  • Part 1 compilation
  • Part 2 frames
  • Part 3 lid
• DIN 83409 ventilation flaps, weatherproof
• DIN 83410 ventilation flap inserts
• DIN 83411 manhole closures made of aluminum with a nominal size of 600 × 400
  • Part 1 compilation, installation
  • Part 2 frame, cover
• DIN 83412 Elliptical manhole closures (ISO type E) for pressures up to 3 bar
  • Part 1 compilation, installation
  • Part 2 frame, cover
• DIN 83414 Small ship hatches for emergency exit, weatherproof
  • Part 1 compilation, safety requirements
  • Part 2 coaming
  • Part 3 lid
• DIN 83415 Ships and marine technology - Central locking - Emergency exit hatches
• DIN 83417 rope hatch; Nominal size 300
• DIN 83418 guide pulley attachable, for rope hatch
• DIN 83419 Profile sealing rings made of elastomers for sealing caps
• DIN 83422 bilge pots with sieve lid and suction baskets
• DIN 83423 sieve cover for bilge wells
• DIN 83471 Ships and marine technology - Magnetic compasses and accessories - Main dimensions and limit dimensions
• DIN 83512 inland navigation vehicles - outboard ladders
• DIN 84154 capstan heads (design according to ISO 6482: 1980)
• DIN 84155 shipbuilding - chain stoppers
• DIN 84525 anchor winches and capstan - chain washers for anchor chains - construction dimensions
• DIN 85003 Technical delivery conditions for valves in shipbuilding
  • Part 1 General
  • Part 2 compilation of possible requirements and tests
  • Part 3 butterfly valves
  • Part 4 shut-off valves
  • Part 5 shut-off check valves
  • Part 6 Manually operated gate valves
  • Part 7 diaphragm valves
  • Part 8 ball valves
• DIN 85004 pipelines made of copper-nickel alloys
  • Part 2 Basics for design and manufacture, testing
    • Correction 1
  • Part 4 Technical delivery conditions for pipes
  • Part 9 Basics for radiographic testing; Text in German and English
• DIN 85005 Ships and marine technology - Graphic symbols for technical documentation
  • Supplement 1 index
  • Part 1 General
  • Part 2 pipes and hose lines, pipe and hose connections, penetrations
  • Part 3 shut-off, control and regulating organs
  • Part 4 sounding, air and filling pipes; Text in German and English
  • Part 5 water steam generator, heat exchanger, container
  • Part 6 fresh water generator
  • Part 7 containers under pressure
  • Part 8 components of the power transmission and steering system
  • Part 9 suction and pressure ports
  • Part 10 transducers and operating displays; Text in German and English
  • Part 11 turbines
  • Part 12 compressor
  • Part 14 pumps, filters, separators, dryers
  • Part 15 processes, drainage
  • Part 16 ventilation systems
  • Part 17 doors, hatches, openings, windows, stairs, elevators
  • Part 18 Sanitary facilities; Text in German and English
  • Part 23 insulation
  • Part 24 components for vibration and noise protection measures
  • Part 27 Mechanical remote controls
  • Part 30 Electrical power generation, power distribution
  • Part 32 call and alarm systems
  • Part 33 economic institutions
  • Part 34 display and operating elements of ship propulsion systems
  • Part 35 navigation systems
  • Part 36 radio, telex and transmission systems
• DIN 85031 Ships and marine technology - steel expansion joints
• DIN 85051 Pressfitting systems for pipelines in shipbuilding - General requirements and test methods
  • Part 1 operating pressures up to 16 bar
• DIN 85339 screw plugs with collar and external hexagon - With fastening button and vent hole
• DIN 85387 Ships and marine technology - Loose flanges and welding necks of the very light series
  • Part 1 loose flanges DN 32 to DN 50, PN to 25, DN 65 to DN 125, PN to 10
  • Part 2 welding necks made of CuNi10Fe1,6Mn, DN 32 to DN 50, PN to 25, DN 65 to DN 125, PN to 10
• DIN 85389 Ships and marine technology - flanges on castings of the very light series - DN 32 to DN 50, PN to 25, DN 65 to DN 125, PN to 10 - construction principles
• DIN 85623 Refrigeration and ventilation systems on ships - Terms; Text in German and English
• DIN 85740 maneuvering systems of ships - terms
• DIN 86001 ship pipelines - pressure levels, pressure tests
• DIN 86003 Ships and marine technology - Design, manufacture and testing of pipeline systems for liquid media
  • Part 1 construction
  • Correction 1
  • Correction 2
  • Supplement 1 pressure loss calculation
• DIN 86004 Ships and marine technology - Corrosion-reducing construction, measures and commissioning of pipelines
  • Part 1 CuNiFe piping systems
• DIN 86008 steel pipes for ship pipelines
  • Part 1 Selection and overview of seamless and welded tubes , January 1998 withdrawn without replacement
  • Part 2 Selection and overview of seamless and welded precision steel tubes , withdrawn January 1998 without replacement
• DIN 86009 exhaust pipes on ships - steel pipes
• DIN 86015 Ship pipelines made of plasticizer-free polyvinyl chloride (PVC-U) with adhesive connections; Application, processing, laying
• DIN 86016 pipe clamps made of steel for ship pipelines made of plasticizer-free polyvinyl chloride (PVC-U)
• DIN 86018 Welded tubes made of CuNi10Fe1,6Mn for pipelines - dimensions
• DIN 86019 Seamless tubes made of CuNi10Fe1.6Mn for pipelines - dimensions for standard and precision tubes
• DIN 86021 cast flanges made of copper alloys - construction principles for nominal pressure 10, 16, 25
• DIN 86025 pipe clamps for shipbuilding - mounting clamps with console
  • Part 1 form A without insert, form B with insert
  • Part 2 form C without insert, form D with insert
  • Part 3 deposits
• DIN 86026 pipe clamps for shipbuilding
  • Part 1 pipe clamps for pipes DN 8 to DN 1400
  • Part 2 inserts for pipe clamps
• DIN 86028 welding necks made of CuNi10Fe1,6Mn - Technical delivery conditions
• DIN 86037 Loose flanges and welding necks for tubes made of copper-nickel alloys
  • Part 1 compilation
  • Part 2 welding necks
  • Part 3 loose flanges
• DIN 86038 Ships and marine technology - Loose flanges and flanges of the very light series
  • Part 1 flange DN 32 to DN 125
  • Part 2 loose flanges DN 32 to DN 50, up to PN 25, DN 65 to DN 125, up to PN 10
  • Part 3 welding neck flange DN 32 to DN 125
• DIN 86039 Ships and marine technology - Flat gaskets for flange connections of the very light series DN 32 to DN 50, up to PN 25, DN 65 to DN 125, up to PN 10
• DIN 86040 Ships and marine technology - welding flanges of the very light series
• DIN 86041 welding flanges
  • Part 1 containers and sea chests, nominal pressure 10 and 16
  • Part 2 outboard connections, nominal pressure 10, 16, 40
• DIN 86042 blind perforated disks (glasses blind disk) - connection dimensions according to nominal pressure PN 10 and PN 16
• DIN 86044 exhaust pipes on ships - flanges
  • Part 1 Heavy execution
  • Part 2 Easy execution
• DIN 86056 pipe bushing with union nut and sealing ring for pipes made of steel or copper and wrought copper alloys
• DIN 86057 welding flanges for bushings
• DIN 86059 bushing with flanges, for steel pipes, nominal pressure 10
• DIN 86061 connection piece with pipe flange, for steel pipes, nominal pressure 10
• DIN 86064 connection piece with pipe flange and welding flange, for steel pipes, nominal pressure 10
• DIN 86066 cast steel weld-in elbow for swing check valves - DN 50 to DN 150, flange connection to PN 10
• DIN 86072 exhaust pipes on ships - flat seals
  • Part 1 For heavy-duty flange connections
  • Part 2 For flange connections, light design
• DIN 86076 gasket sheets for shipbuilding - requirements and tests
• DIN 86080 Ships and marine technology - System coordination plans in shipbuilding; Text in German and English
• DIN 86082 Ships and marine technology - Isometric representation of pipes in ship technology; Text in German and English
• DIN 86086 fittings for welding in pipes made of copper-nickel alloys - technical delivery conditions
• DIN 86087 fittings for welding into pipes made of copper-nickel alloys - saddle sockets
• DIN 86088 fittings for welding in pipes made of copper-nickel alloys - T-pieces
• DIN 86089 fittings for welding into pipes made of copper-nickel alloys - conical transition pieces
• DIN 86090 fittings for welding into pipes made of copper-nickel alloys - pipe bends
• DIN 86103 branch socket for screw-in spigot with metric fine thread and Whitworth pipe thread
• DIN 86110 ship operation tank lines - filling and pressure equalization devices for tanks on ships - sounding pipes
• DIN 86111 weld-in deck seals for filling and monitoring pipes
• DIN 86120 monitoring pipe taps
• DIN 86121 screw caps; Pipe thread G1 to G6
• DIN 86125 pipelines for shipbuilding - Pipes and pipeline components - overview
• DIN 86126 tube fittings for shipbuilding - 24 ° fittings with metric thread - shapes and dimensions
• DIN 86127 tube fittings for shipbuilding - 24 ° fittings with metric thread - technical delivery conditions
• DIN 86128 pipe couplings
  • Part 1 Technical delivery conditions for pipe couplings for connecting pipes and fittings made of metal
  • Part 2 dimensions for pipe couplings for connecting pipes and fittings made of metal
• DIN 86129 screw plugs and flat sealing rings for weld-in deck closures for filling and monitoring pipes
• DIN 86150 socket weld ends for pipelines
• DIN 86151 ship operation tank lines - terms, definitions, abbreviations, symbols
• DIN 86200 fire extinguishing and deck washing systems; Couplings, fittings, hoses, accessories; Overview for shipbuilding
• DIN 86201 connection piece for international fire extinguishing shore connection - nominal pressure 16
• DIN 86202 C pressure coupling PN 16 made of copper-zinc alloy for use on ships
• DIN 86203 B pressure coupling PN 16 made of copper-zinc alloy for use on ships
• DIN 86204 C-coupling PN 16 made of copper-zinc alloy for use on ships
• DIN 86205 B coupling PN 16 made of copper-zinc alloy for use on ships
• DIN 86206 C-blind coupling PN 16, made of copper-zinc alloy for use on ships
• DIN 86207 B blind coupling PN 16, made of copper-zinc alloy for use on ships
• DIN 86209 Supply of ships with LNG as fuel - Technical delivery conditions and test criteria for supply couplings
  • Part 1 dry couplings
• DIN 86210 Supply of operating materials and disposal of liquid waste from seagoing vessels
  • Part 1 connection fittings for hose lines, testing and maintenance up to PN 10; Text in German and English
  • Part 2 breakaway couplings up to PN 10; Text in German and English
  • Part 3 geometry of the bunker station; Text in German and English
• DIN 86211 hose connection valves PN 16 with C or B couplings and with flange connection
• DIN 86251 shut-off valves for shipbuilding, made of cast iron, with flanges, DN 15 to DN 500
• DIN 86252 check valves for shipbuilding, lockable, made of cast iron, with flanges, DN 15 to DN 500
• DIN 86254 Ships and marine technology - Shut-off valves of the very light series - DN 32 to DN 125, PN 10
• DIN 86257 Ships and marine technology - Lockable check valves of the very light series - DN 32 to DN 125, PN 10
• DIN 86258 Ships and marine technology - Non-lockable check valves of the very light series - DN 32 to DN 125, PN 10
• DIN 86259 Ships and marine technology - Flanged gate valves of the very light series DN 32 to DN 125, PN 10
• DIN 86260 shut-off valves for shipbuilding, made of red bronze, with flanges, DN 15 to DN 500
• DIN 86261 check valves for shipbuilding, lockable, made of gunmetal, with flanges, DN 15 to DN 500
• DIN 86263 straight-way valves for shipbuilding - angled seat design, soft-sealing, with socket connection - DN 15 to DN 50, PN 16
• DIN 86264 straight-way valves for shipbuilding - inclined seat design, soft-sealing, short design, with flange connection - DN 15 to DN 200
• DIN 86265 straight-way valves for shipbuilding - angled seat design, soft-sealing, normal design, with flange connection - DN 15 to DN 200
• DIN 86266 Ships and marine technology - Butterfly valves for flanges of the very light series for clamping and flanging - DN 50 to DN 125, PN 10
• DIN 86270 ballast water management - requirements and tests
  • Part 1 monitoring system for ballast water treatment plants
  • Part 2 equipment for monitoring
  • Part 3 efficiency control
• DIN 86282 ship drainage systems - flanges for international waste water discharge connection
• DIN 86284 connection forms for the delivery and acceptance of drinking water, fire-fighting water, waste water, oil and oil-containing mixtures - overview
• DIN 86285 flanges for international connection for the discharge of oil residues
• DIN 86286 Sanitary facilities on ships - arrangement of sanitary objects and fittings
• DIN 86287 Pipelines on ships and sea structures - Pipes and fittings made of steel with plug-in socket - Laying and processing
• DIN 86290 Systems and procedures for chemical and microbiological drinking water protection on watercraft and marine structures, taking corrosion and water quality into account
• DIN 86292 Ships and marine technology - Wastewater treatment plants - Methods for sampling
• DIN 86341 Ships and marine technology - Loose flanges and welding necks of the very light series - Welding necks made of steel and stainless steel DN 32 to DN 50, up to PN 25, DN 65 to DN 125, up to PN 10
• DIN 86501 head piece valves made of gunmetal with 24 ° connection for bore form W according to DIN 3861
• DIN 86528 locking plates for head piece fittings
• DIN 86552 head piece valves made of steel with 24 ° connection for bore form W according to DIN 3861
• DIN 86720 wedge flat gate valve made of red brass with head piece and flanges DN 20 to DN 100, PN 16
• DIN 86735 oil-water separators - tank system for bilge water on seagoing vessels
• DIN 87101 check valves, self-closing, vertical design, DN 50 to DN 150, PN 1 - flange connection according to PN 10
• DIN 87151 gray cast iron coarse filter - DN 40 to DN 200, nominal pressure 2.5 - composition and connection dimensions
• DIN 87152 gray cast iron coarse filter
  • Part 1 housing, straight shape
  • Part 2 housing, corner shape
• DIN 87153 gray cast iron coarse filter; cover
• DIN 87154 gray cast iron coarse filter; Strainer baskets
• DIN 87155 gray cast iron coarse filter; Sealing rings
• DIN 87160 suction cups made of metal, DN 20 to DN 200
  • Part 1 compilation
  • Part 2 items
• DIN 87223 water drains with odor trap, not lockable
• DIN 87224 water drains with odor trap, lockable
• DIN 87225 water drains for open decks
• DIN 87226 water drains - Lateral drains for open decks
• DIN 87303 square with tapered and parallel side surfaces for fittings in shipbuilding
• DIN 87308 controls for fittings in shipbuilding - hand cranks with square hole with tapered side surfaces
• DIN 87310 multi-purpose wrench with internal square and flat edge
• DIN 87311 handwheel wrench
• DIN 87312 flat-edge socket wrench for deck closures of filling and monitoring pipes
• DIN 87314 square socket wrench for drain screw connections
• DIN 87340 drill pipe remote controls; Nominal sizes, component overview
• DIN 87341 drill pipe remote controls; Installation
• DIN 87343 drill pipe remote controls; Weld-in joints
• DIN 87344 drill pipe remote controls; Slip-on joints
• DIN 87346 drill pipe remote controls; camp
• DIN 87349 drill pipe remote controls; Bevel gears
• DIN 87350 drill pipe remote controls; Pivoting angle drives
• DIN 87351 drill pipe remote controls; Spindle extensions, slip-on pipe connections, square welded spigots
• DIN 87352 drill pipe remote controls; Protective hoods for swiveling angle drives
• DIN 87371 drill pipe remote controls; Drill pipe holder
• DIN 87373 drill pipe remote controls; Bushings, watertight
• DIN 87374 drill pipe remote controls; Weld-in control points on deck, with square shaft pins
• DIN 87375 drill pipe remote controls; Weld-in control points on deck, with swiveling angle drive
• DIN 87378 drill pipe remote controls; Symbols for schematic representations
• DIN 87379 drill pipe remote controls; Technical delivery conditions, construction details
• DIN 87380 drill pipe remote controls; Slip-on joints, can be disengaged
• DIN 87381 drill pipe remote controls; Spindle extensions with straight square, push-on pipe connections, square welded spigots
• DIN 87382 drill pipe remote controls; Bushings with angle drive, watertight
• DIN 87383 drill pipe remote controls; Intermediate control points
• DIN 87384 drill pipe remote controls; Control points on the wall, foldable
• DIN 87721 drain fittings
  • Part 1 compilation, installation
  • Part 2 drain plugs, weld-in plates
• DIN 87901 air valves for pumps
• DIN 89158 Electrical cables for ships and offshore units - Power cables with shield (armouring) - MGCG, MGCH, halogen-free
• DIN 89159 Electrical cables for ships and offshore units - Telecommunication cables with screen - FMGCG, FMGCH, halogen-free
• DIN 89160 Electrical cables for ships and offshore units - Power cables without shield - MGG, MGH, halogen-free
• DIN 89250 junction boxes - AC / DC 16 A, 500 V, degree of protection IP56
• DIN 89262 two-pole sockets with protective contact - DC 10 A, AC 16 A, AC / DC 250 V, degree of protection IP56
• DIN 89263 Two-pole sockets with protective contact - switchable - AC / DC 10 A, AC / DC 250 V, degree of protection IP56
• DIN 89266 Two-pole couplings with protective contact - DC 10 A, AC 16 A, AC / DC 250 V, degree of protection IP56
• DIN 89267 two-pin plug with protective contact - DC 10 A, AC 16 A, AC / DC 250 V, degree of protection IP56
• DIN 89270 installation switch - AC / DC 10 A, AC / DC 250 V, degree of protection IP56
• DIN 89280 entries for electrical cables and lines
  • Part 1 compilation
  • Part 2 items
• DIN 89283 entries for electrical cables - grommet screw sockets
• DIN 89284 screw plugs for mounting holes and entries according to DIN 89280; Text in German and English
• DIN 89285 Entries for electrical cables and lines - Cable glands with degree of protection IP66 and IP68 for use on watercraft; Text in German and English
• DIN 89300 branch inserts with jacket terminals - 16 A, 500 V, for conductors up to 2.5 mm²
• DIN 89320 Two-pole contact inserts with protective contact for watertight connectors - DC 10 A, AC 16 A, 250 V.
• DIN 89322 switch insert - AC / DC 10 A, AC / DC 250 V, degree of protection IP00
• DIN 89345 earthing inserts for entries for electrical cables and lines
• DIN 89347 washers for entries for electrical cables and lines; Text in German and English
• DIN 89349 sealing rings for entries for electrical cables and lines; Text in German and English
• DIN 89950 position lights for seagoing vessels and inland vessels; Overview, main dimensions, components
• DIN 91252 Electric road vehicles - Battery systems - Requirements for the design of lithium-ion battery cells; Text in German and English
• DIN 92111 guidelines for tropical tests
• DIN 95360 elastomer spring elements - Technical specification
• DIN 95361 elastomer spring elements - rails
• DIN 95362 elastomer spring elements, hollow prismatic
• DIN 95363 elastomer spring elements, cylindrical; Forms A to F
• DIN 95364 elastomer spring elements - stop buffers, forms A to G
• DIN 95365 elastomer spring elements - hat bearings - forms A to K
• DIN 95366 elastomer spring elements - pot bearings with and without tear-off protection, forms A to G
• DIN 95367 elastomer spring elements - roof bearing forms A and B
• DIN 95368 elastomer spring elements - cone bearings forms A to C
• DIN 95369 elastomer spring elements - cap bearings form A
• DIN 95406 elastomer spring elements - flange bearings - forms A to P
• DIN 95407 air spring elements - membrane shape
• DIN 95408 spring elements - U-shaped spring elements - form J
• DIN 96010 Medical instruments - sequestering forceps according to van Buren
• DIN 96015 medical instruments - plaster scissors according to Stille
• DIN 96031 Medical instruments - Kidney clamps according to Guyon
• DIN 96033 Medical instruments - kidney clamp according to Wertheim-Cullen
• DIN 96035 Medical instruments - bronchial clamp according to Semb
• DIN 96036 Medical instruments - Price-Thomas bronchial clamp
• DIN 96042 Medical instruments - Packaging - Technical specification
• DIN 96053 Medical instruments - Retractors according to Ollier
• DIN 96056 Medical instruments - Bone raspatory
• DIN 96057 Medical instruments - Sedillot raspatory
• DIN 96058 Medical instruments - Elevator and bone lever according to Lange-Hohmann
• DIN 96060 Medical instruments - Elevator according to Langenbeck
• DIN 96073 Medical instruments - tongue depressors, double ended
• DIN 96074 Medical instruments - Freer elevator
• DIN 96075 Medical instruments - Retractors according to Finsen
• DIN 96076 Medical instruments - Wullstein retractor
• DIN 96082 Medical instruments - Beckmann-Adson retractors
• DIN 96100 Medical instruments - Raspatory according to Farabeuf-Collin
• DIN 96105 Medical instruments - Bent up surgical scissors according to Tönnis
• DIN 96110 Medical Instruments - Technical Specification for Receipt Samples
• DIN 96114 Medical instruments - Mayo dissecting scissors without hard metal inserts
• DIN 96121 Medical instruments - Crile-Wood needle holder with hard metal inlays
• DIN 96123 Medical instruments - needle holder according to Finochietto with hard metal inlays
• DIN 96128 Medical instruments - Wangensteen needle holder with hard metal inserts
• DIN 96140 Medical Instruments - Flat Chisel According to Stille
• DIN 96142 Medical instruments - Kronecker ligature needle
• DIN 96144 Medical instruments - Williger raspatory
• DIN 96145 Medical instruments - Gillies surgical forceps
• DIN 96146 Medical instruments - Brunner retractors
• DIN 96149 Medical instruments - Resection spoon according to Daubenspeck
• DIN 96151 Medical instruments - Hemingway resection spoon
• DIN 96156 Medical instruments - Kocher retractor, with curved blade
• DIN 96160 Medical instruments - wire loop needle
• DIN 96164 Medical instruments - Perthes reamer
• DIN 96166 Medical instruments - hook handle for wire saw according to Gigli
• DIN 96298 Medical instruments - terms, measurement methods and tests
  • Part 1 terms
  • Part 2 measurement methods for determining the basic dimensions of standard surgical instruments