Rolf Isermann
Rolf Isermann (* 20th August 1938 in Stuttgart ) is a German engineer and professor of control engineering in the Department of Electrical Engineering and Information Technology of the Technical University of Darmstadt .
Life
Rolf Isermann studied mechanical engineering at the Technical University of Stuttgart and passed the diploma examination in 1962. In 1965 he received his doctorate in engineering. at the same university with the dissertation The dynamic behavior of overheating when taking into account the coupling with other parts of a steam generator . In 1968 Isermann completed his habilitation with the thesis The dynamic control behavior of steam-heated heat exchangers at the Faculty of Mechanical Engineering at the University of Stuttgart .
In 1971 Isermann was a visiting professor at Purdue University in Indiana, USA . In 1972 he became a private lecturer and in 1974 professor for control engineering at the University of Stuttgart. In 1977 Isermann accepted an appointment as successor to Winfried Oppelt at the - then still - Technical University of Darmstadt . From then on, until his retirement in 2006 he represented in Darmstadt the field control technology and process automation in the Department of Electrical and Computer Engineering.
From 1988 to 2001 Isermann was the spokesman for the Collaborative Research Center 241 Integrated Mechanical-Electronic Systems funded by the German Research Foundation . In 1998, Isermann was visiting professor in the mechanical engineering department at the University of California at Berkeley . Rolf Isermann retired in 2006, but is still scientifically active.
Act
Isermann's scientific work is dedicated to both theoretical and practical aspects of control engineering. Theoretical research focuses on the modeling of the dynamic behavior of technical systems , the application of new methods in adaptive control, and the error detection and diagnosis of technical systems . The connection is guaranteed on issues of practice by picking up on current control engineering problems relating to such diverse areas as actuators , three-phase machines , refrigerators , motor vehicles , power plants , oil and gas pipelines , pumps, robots , dryers , combustion engines , heat pumps , Heat exchangers , rolling mills and machine tools .
In his academic career, Isermann has supervised over 100 doctoral theses - an extremely seldom reached number in engineering. Isermann had supervised the first five doctoral theses at the University of Stuttgart. A further 95 dissertations followed at the Technical University of Darmstadt. 70 percent of Isermann's research is financed by third-party funds, of which a third is through cooperation agreements with industry. From 1977 to 2006, Isermann's department raised a total of almost 40 million euros in third-party funding.
Work at the International Federation of Automatic Control (IFAC)
- 1975–1978: Chairman of the Application Committee
- 1988–1993: Chairman of the Safeprocess Committee
- 1996–1999: Vice-President of the Executive Committee
- 1999–2002: Vice-President of the Technical Committee
- 2002–2008: Member of the Council
honors and awards
- 1989 Honorary Doctorate from the Faculté des Sciences Appliquées of the Université libre de Bruxelles , Belgium.
- 1996 Ring of Honor from the Association of Electrical, Electronic and Information Technologies (VDE) for its pioneering technical and scientific achievements.
- 1996 honorary doctorate from the Polytechnic University of Bucharest .
- 1998 Visiting Professor in the Department of Mechanical Engineering at the University of California at Berkeley as part of the Russell Severance Springer Professorship.
- 2003 Selected by the Technology Review of the Massachusetts Institute of Technology (MIT) as one of 10 scientists whose research on new technologies will change the entire world of life and work.
- 2007 Honorary member of the Association of German Engineers (VDI)
- 2010 Rufus Oldenburger Medal of the American Society of Mechanical Engineers (ASME).
- 2020 Cross of Merit on Ribbon of the Order of Merit of the Federal Republic of Germany (Federal Cross of Merit ).
Fonts (selection)
- ID
- R. Isermann: Process identification. Identification and parameter estimation of dynamic processes with discrete signals . Springer, Berlin / Heidelberg / New York 1974, ISBN 3-540-06911-9 .
- R. Isermann: Identification of dynamic systems: basic methods . 2nd Edition. Springer, Berlin / Heidelberg / New York / and others 1992, ISBN 3-540-54924-2 .
- R. Isermann: Identification of dynamic systems: special methods, applications . 2nd Edition. Springer, Berlin / Heidelberg / New York / and others 1992, ISBN 3-540-55468-8 .
- R. Isermann, M. Münchhof: Identification of Dynamic Systems. An Introduction with Applications . Springer, Heidelberg 2011, ISBN 978-3-540-78878-2 .
- Control engineering
- R. Isermann: Digital control systems. Basics, deterministic regulations . 2nd Edition. Springer, 1987, ISBN 3-540-16596-7 .
- R. Isermann: Digital control systems. Stochastic controls, multivariable controls, adaptive controls, applications . 2nd Edition. Springer, 1987, ISBN 3-540-16597-5 .
- R. Isermann, KH Lachmann, D. Matko: Adaptive Control Systems . Prentice Hall, 1992, ISBN 0-13-005414-3 .
- Fault diagnosis
- R. Isermann (Hrsg.): Monitoring and fault diagnosis of technical systems. Modern methods and their applications in technical systems . VDI book, 1994, ISBN 978-3-540-62178-2 .
- R. Isermann: Fault Diagnosis Systems. An Introduction from Fault Detection to Fault Tolerance . Springer, 2006, ISBN 978-3-540-24112-6 .
- R. Isermann: Fault-Diagnosis Applications: Model-Based Condition Monitoring: Actuators, Drives, Machinery, Plants, Sensors, and Fault-tolerant Systems . Springer, 2011, ISBN 978-3-642-12766-3 .
- Mechatronics
- R. Isermann: Mechatronic Systems: Fundamentals . Springer, 2003, ISBN 978-1-85233-930-2 .
- R. Isermann (Ed.): Vehicle dynamics control: modeling, driver assistance systems, mechatronics . Vieweg + Teubner, 2006, ISBN 978-3-8348-0109-8 .
- R. Isermann (Hrsg.): Electronic management of motor vehicle drives: Electronics, modeling, control and diagnosis for combustion engines, transmissions and electric drives . Vieweg + Teubner, 2010, ISBN 978-3-8348-0855-4 .
Web links
- Literature by and about Rolf Isermann in the catalog of the German National Library
- Isermann's website at TU Darmstadt
Individual evidence
- ↑ Rolf Isermann: The dynamic behavior of overheating when taking into account the coupling with other parts of a steam generator. Catalog of the German National Library, accessed on August 30, 2015 . Dissertation dated December 9, 1965, Faculty of Mechanical Engineering, Technical University of Stuttgart.
- ^ Walter Mann, Rolf Isermann: Identification and digital control of a drum dryer. Catalog of the German National Library, accessed on August 30, 2015 . Habilitation on December 11, 1968, Faculty of Mechanical Engineering, University of Stuttgart.
- ^ Rolf Isermann. TU-Darmstadt, Research Group Control Engineering and Process Automation, accessed on August 30, 2015 . Isermann's website at TU Darmstadt.
- ^ Michael Reichenbach: TU Darmstadt: Professor Rolf Isermann emeritus. Springer-Verlag, Redaktion ATZonline.de, November 15, 2006, accessed on August 30, 2015 . Rolf Isermann retires.
- ↑ Stefan Nold: Knowledge-based error detection and diagnosis with the case studies of centrifugal pumps and three-phase motors . Darmstadt dissertation, 1991.
- ^ Rolf-Dieter Gruhle: Control dynamic investigations on compression cold processes and heat pumps . Darmstadt dissertation, 1987.
- ↑ Helmut Siebert: Investigations of various methods for leak monitoring in pipelines . Darmstadt dissertation, 1981.
- ↑ Gerhard Geiger: Technical error diagnosis by means of parameter estimation and error classification using the example of an electrically driven centrifugal pump . Darmstadt dissertation, 1985.
- ↑ Robert Specht: Parameter estimation and digital adaptive control of an industrial robot . Darmstadt dissertation, 1987.
- ↑ Wolfgang Mann: Identification and digital control of a drum dryer . Stuttgart dissertation, 1977.
- ^ Klaus Schwamberger: Modeling and regulation of building heating systems with heat pumps . Stuttgart dissertation, 1991.
- ↑ Mario T. Cameron: Modeling, simulation and control of the strip thickness and the strip tension in cold rolling mills . 1999.
- ↑ Jörg Feuck: 100th doctorate with Prof. Dr. Rolf Isermann. TU-Darmstadt, Communication, February 23, 2009, accessed on August 30, 2015 .
- ↑ Les Docteurs honoris causa de l'Université libre de Bruxelles 2010 - 1898. (PDF) Université libre de Bruxelles, 2010, accessed on August 30, 2015 (French).
- ^ Rufus Oldenburger Medalists. American Society of Mechanical Engineers, Committee on Honors (COH), 2010, accessed August 30, 2015 .
personal data | |
---|---|
SURNAME | Isermann, Rolf |
BRIEF DESCRIPTION | German engineer, professor of control engineering and scientist for mechatronics |
DATE OF BIRTH | August 20, 1938 |
PLACE OF BIRTH | Stuttgart |