Contour line

from Wikipedia, the free encyclopedia
Contour line image ( quoted projection ) of a mountain.

Contour lines , even isohypses (from ancient Greek ἴσος ISOS "same" and ὕψος Hypsos "Height, Hill") or level lines (also historically contour lines ) designate on topographic maps of the same adjacent dots height . ( Equidistant ) sets of lines describe a height profile. Contour lines are therefore a special case of isolines and sets of levels .

Contour lines , also Iso bathen (from ísos and ancient Greek βαθύς bathýs "deep") are contour lines in waters . They reproduce the relief of the sea or lake bed.

If the accuracy requirements are low, heights are also highlighted by coloring them in regional colors .

species

Types of contour lines
normal lines = main contour lines
thick lines = counting
lines dashed lines = auxiliary contour lines

Main contour lines

Main contour lines are called the contour lines that are reached with a multiple of the equidistance from the zero level, for example the contour lines at 270, 280, 290, 300 and 310 meters with an equidistance of 10 meters.

Counting lines

The main contour lines, which are usually shown thicker and / or labeled with often round height values ​​(e.g. at 300 meters), are called counting lines.

Auxiliary contours

Auxiliary contour lines (also called intermediate contour lines) are contour lines that are drawn between two adjacent main contour lines in order to be able to better represent the relief shape through the contour lines, especially in flatter terrain , for example 282.5, 285 and 287.5 meters. Without the auxiliary contour lines, relief structures that can no longer be represented with equidistance would be omitted in planes.

presentation

A topographic map with contour lines

Main contour lines are often represented by a black or brown solid line with a line width of 0.1 or 0.15 mm. Counting lines are displayed like main contour lines, only that their line width is around 0.2 mm. Auxiliary contour lines are displayed in the same color as the main contour lines, but as a broken line with a line width of less than 0.1 mm.

Contour lines - but also contour lines on glaciers - are often shown on maps with a blue line color.

labeling

Contour lines should be labeled at round contour line values. Additional contour lines can also be labeled as required. In the lowlands , the labels are also useful on auxiliary contour lines. The foot of the contour number is mostly oriented towards the valley , especially in German-speaking countries .

Is not noticeable in the solitary, small contours, whether this a hill or a valley mark, the downward direction is indicated by an arrow in the sink or through small, vertically mounted on the contour lines case strokes marked.

omitting

On very steep terrain, the contour lines may be too close together. Therefore, some contour lines are often left out there or a rock signature is used instead in rocky terrain .

Creation

Manually

Between individual points that represent the terrain, those points are constructed by interpolation that are at the desired heights. Then the points created in this way, which are at the same height, are connected with each other by curves. The prerequisite is that the starting points are known in terms of location and altitude.

Photogrammetric

For the photogrammetric creation of contour lines, it is necessary that a " stereo image pair " of the terrain is available (i.e. there are two images on which the terrain is shown with different viewing directions). A “stereo model” can be created from this, which can be viewed three-dimensionally in the evaluation device or on the computer. In this model, a pointer is placed on the terrain at the desired height so that it lies in the terrain surface. This mark is then used to drive along the site and the distance covered is recorded. This represents the desired contour line.

Terrain model

Digital terrain model: triangular meshing is shown in blue, contour lines are white and red.

A digital terrain model is created from a large number of individual points that represent the terrain . This can be done either by means of a triangulated irregular network or by approximating a rectangular grid . This elevation model is intersected with a horizontal plane at the desired height; the result is the contour line.

application

In addition to their typical use in topographical maps , also as an aid for hikers in hiking maps , for example , the contour lines are of particular importance in the context of the delimitation of surface water catchment areas and thus the watersheds as well as geological mapping - especially the banking process.

Contour lines can also be used to represent height differences, in particular for a change in height as a function of time. Thus, for example, time-dependent deformations ( deformations ) in the tunnel - or underground -Bau or dams are presented graphically.

Contour lines in the two-panel projection

In a two-panel projection ( descriptive geometry ) is referred to a layout plane parallel straight line as a height line .

Groundwater contour lines (hydroisohypses)

The groundwater contour lines serve to map the groundwater level . In nature, this can be seen in aerial photos through the vegetation (e.g. alder and rushes compared to pine forest) and in rural cultivated areas on the drainage ditches. Groundwater elevation maps are made to defuse aerial bombs.

See also

Web links

Commons : Contour line  - collection of images, videos and audio files
Wiktionary: contour line  - explanations of meanings, word origins, synonyms, translations