Chamber of Crafts Region Stuttgart

from Wikipedia, the free encyclopedia
View of the service building of the Stuttgart Region Chamber of Crafts

The Stuttgart Region Chamber of Crafts is one of 53 chambers of crafts in the Federal Republic of Germany. In terms of the number of its members, it is the largest of the eight chambers of crafts in Baden-Württemberg and looks after around 30,000 craft businesses in the Stuttgart region , which includes the districts of Böblingen , Esslingen , Ludwigsburg , Göppingen , the Rems-Murr district and the Stuttgart districtbelong. Sector focuses are construction and expansion, automotive technology and suppliers, which are primarily anchored in metalworking. The facility is spread over two locations: the chamber's administration building is located at Heilbronner Strasse 43 in Stuttgart, and the training academy for the Chamber of Crafts and Crafts Region Stuttgart is at Holderäckerstrasse 37 in the Weilimdorf district of Stuttgart.

Statutory duties

With around 130 employees, the Chamber of Crafts represents the interests of the entire trade in its chamber district. Membership is binding for all independent craftsmen as well as their journeymen and apprentices. The chamber acts as a self-governing body for the craft sector under the supervision of the Baden-Württemberg Ministry of Economics . As a corporation under public law, the Ministry of Economic Affairs delegates the legal supervision of the guilds and the district craft associations in the chamber district. The Chamber of Crafts registers its members in the craft register and regulates vocational training in the craft trades . Among other things, she keeps the apprenticeship role , a directory of all vocational training contracts in her district . In journeyman's and master's examination committees, their members regulate the respective examinations for the individual professions.

Range of services

In addition to its statutory tasks, the Stuttgart Region Chamber of Skilled Crafts comes to the fore primarily through advisory and training opportunities. First and foremost, it sees itself today as a service center for companies such as craftsmen and advises on legal, business, technical, environmental, foreign trade and training-related matters. Among other things, the Starter Center helps budding entrepreneurs with planning and takes care of numerous start-up formalities for them. Companies that are looking for a successor for their previous owner, as well as start-ups who want to continue an existing company, are supported by the chamber with its company exchange, which is part of the nexxt-change joint initiative. The environmental advisory service explains existing requirements of the legislature and explains to the companies how they can meet these requirements. Furthermore, the work of the Chamber of Crafts extends to the political representation of interests and covers the classic area of ​​professional licensing law, examinations, the fight against illegal work and the expert system.

education

The Chamber's training advice is aimed at both the trainers in the companies and their trainees. In total, around 6,500 companies trained around 12,200 young people in 2008; the 3400 girls are compared to 8800 boys. With training exchanges, the Chamber of Crafts tries to bring both sides - businesses and young people interested in crafts - together. In schools, at career information fairs, with workshops and on her website, she explains the more than 100 different trades, runs training courses for applicants for apprenticeships and supports companies with training projects. The Baden-Württemberg Chamber of Skilled Crafts maintains a joint internet platform for recruiting young talent: handwerks-power.de. Various campaigns such as the information tour through over 50 schools in the Stuttgart region make this website known to the public.

further education

View of the training academy of the Stuttgart Region Chamber of Crafts in Weilimdorf

The Stuttgart Region Chamber of Crafts Education Academy has its headquarters in the Stuttgart district of Weilimdorf. As a state supplementary school, it offers the degree of state-recognized business economist in the craft and trains future masters . In addition, the seminars on offer convey knowledge of corporate management, business administration and law, communication and IT, and professional training. Special courses prepare for the journeyman's examination or impart basic entrepreneurial knowledge to start-ups.

Inter-company training

In addition to the in-company apprenticeship, there are inter-company training events for trainees in the training academy. In the ÜBA workshops, full-time teachers train and deepen the specialist knowledge of trainees for interior decorators, SHK plant mechanics, photographers, painters and varnishers, dental technicians and the automotive trades. In doing so, they impart specialist knowledge of the respective occupational profile that the specialized training company does not, or only rarely, serves.

Structures and organization

The Stuttgart Region Chamber of Crafts is divided into six business areas with a joint management for the two locations in Stuttgart-Mitte and Weilimdorf. At the head of the chamber leadership are a general manager and a president . The full-time managing director directs the chamber's day-to-day business, while the voluntarily elected president takes on representative tasks. Thomas Hoefling is currently managing director and Rainer Reichhold chamber president.

The top of the chamber with its representatives is installed by the general assembly. It is the democratic heart and the highest decision-making body of the Chamber of Crafts and currently consists of 39 delegates. Of these, 13 are representatives of the employee group, 26 members represent the independent craft and craft-like trades. It is the task of the General Assembly to decide on the budget, the budget statute, the basic contributions and the contribution rate. It also elects the members of the vocational training committee and the board. The latter consists of the President, the two Vice-Presidents and nine other members. He sets the guidelines and prepares the meetings of the general assembly.

The responsibilities within the Stuttgart Region Chamber of Crafts are shown schematically in the structure and organization plan.

history

An amendment to the trade regulations enacted in 1897 also led to the establishment of a Chamber of Crafts in Stuttgart. The founding meeting of the Stuttgart Chamber of Crafts took place on December 3, 1900 at 11 a.m. in the building of the Stuttgart State Trade Museum - today's Haus der Wirtschaft. From 1906, the Chamber of Crafts and the Stuttgart Chamber of Commerce and Industry operated a joint legal advice center for their members. Since February 11, 1929, the chamber has kept its handicrafts register, which lists all independent craftsmen in the chamber district. In the same year, the control by Reich Commissioners , which had been binding until then, was no longer applicable.

time of the nationalsocialism

The DC circuit by the Nazis brought in between March and June 1933, the craft organizations to the political line of the NSDAP . From then on, the Stuttgart Chamber of Crafts regularly took part in marches and public vows and used the jargon typical of the time in speeches and publications. In February 1939, the NSDAP member Philipp Baetzner became President of the Chamber of Crafts. On January 1, 1943 put an imperial decree of July 1942, the chambers of trade with the Chambers of Commerce to Gauwirtschaftskammern together. On this date, the Stuttgart Chamber of Crafts formally ceased to exist as an independent institution. The building in which the Gau Chamber of Commerce was housed was completely destroyed on September 12, 1944 by an Allied air raid. The data of the handicrafts roll from the time before this day was almost completely lost.

New start after the end of the war

In 1945, after the end of the Second World War , Stuttgart was occupied to a small extent by French and the greater part by American occupation. In 1948, the American occupation forces enforced complete freedom of trade, which was expressly confirmed for Württemberg in January 1949. However, the craft regulations passed in 1953 restored the self-administration of the craft and thus also the Stuttgart Chamber of Crafts.

Recent developments

In the first five decades of its existence, the Chamber of Crafts had nine different offices in Stuttgart. On January 26, 1962, she inaugurated her administration building at Heilbronner Strasse 43, on whose property the chamber is still located today. There is now a newer building next to this building, which was occupied in 2004 and handed over to its intended use on November 18, 2005.

In Stuttgart-Weilimdorf, a training center for the craft of the region was established in March 1980, which opened on May 17, 1982 as a vocational training center (BBZ). It later changed its name to the Education and Technology Center (BTZ), and since 2006 it has been called the Crafts Education Academy . The Landesakademie des Handwerks, which should not be confused with it, is also located in the building of the Bildungsakademie.

Name change

The Stuttgart Chamber of Crafts changed its name to the Stuttgart Region Chamber of Crafts in November 1995 in order to underline its ties with the districts around Stuttgart. Since 1963 it has had a partnership with the Strasbourg-based Chambre de Métiers d'Alsace .

See also

Web links

Website of the Stuttgart Region Chamber of Crafts

Individual evidence

  1. Statistics of the companies 2008 ( Memento of the original from December 23, 2008 in the Internet Archive ) Info: The archive link was inserted automatically and has not yet been checked. Please check the original and archive link according to the instructions and then remove this notice.  @1@ 2Template: Webachiv / IABot / www.hwk-stuttgart.de
  2. Statistics of the companies 2008 ( Memento of the original from December 23, 2008 in the Internet Archive ) Info: The archive link was inserted automatically and has not yet been checked. Please check the original and archive link according to the instructions and then remove this notice.  @1@ 2Template: Webachiv / IABot / www.hwk-stuttgart.de
  3. ↑ Composition of the General Assembly ( Memento of the original from September 22, 2009 in the Internet Archive ) Info: The archive link was inserted automatically and has not yet been checked. Please check the original and archive link according to the instructions and then remove this notice.  @1@ 2Template: Webachiv / IABot / www.hwk-stuttgart.de
  4. Structure and organization plan (organizational chart) ( Memento of the original from June 27, 2009 in the Internet Archive ) Info: The archive link has been inserted automatically and has not yet been checked. Please check the original and archive link according to the instructions and then remove this notice.  @1@ 2Template: Webachiv / IABot / www.hwk-stuttgart.de
  5. Lentwojt, Peter. 100 years for the craft. Sketches from regional economic history. Stuttgart: 2000.
  6. 100 years for the craft, p. 15.
  7. 100 years for the craft, p. 31.
  8. 100 years for the craft, pp. 34–36.
  9. Handwerkskammer Region Stuttgart, press release 064/2005  ( page no longer available , search in web archivesInfo: The link was automatically marked as defective. Please check the link according to the instructions and then remove this notice.@1@ 2Template: Toter Link / www.hwk-stuttgart.de