Kirnach (Wertach)

from Wikipedia, the free encyclopedia
Kirnach
The straightened Kirnach near Ebenhofen, in the background the inlet of the Kirnach power plant

The straightened Kirnach near Ebenhofen, in the background the inlet of the Kirnach power plant

Data
Water code EN : 1264
location Bavaria
River system Danube
Drain over Wertach  → Lech  → Danube  → Black Sea
source in the Kempter Forest west of Görisried
47 ° 42 ′ 28 ″  N , 10 ° 26 ′ 8 ″  E
Source height approx.  930  m above sea level NN
muzzle near Biessenhofen-Ebenhofen in the Wertach coordinates: 47 ° 49 '17 "  N , 10 ° 38' 5"  E 47 ° 49 '17 "  N , 10 ° 38' 5"  E
Mouth height approx.  695  m above sea level NN
Height difference approx. 235 m
Bottom slope approx. 8.8 ‰
length 26.8 km
Catchment area 109 km²
Communities Görisried , Unterthingau , Aitrang , Ruderatshofen , Biessenhofen

The Kirnach ( Bavaria ) is an approx. 30 km long river in the Ostallgäu district . It flows through the communities of Unterthingau , Aitrang , Ruderatshofen and Biessenhofen . It rises west of Görisried in the Kempter Forest and flows northeast of the Biessenhofen district of Ebenhofen into the Wertach .

Side canal at Aitrang

Due to regular flooding on the lower reaches of Ebenhofen and Biessenhofen, extensive flood protection measures with guide dikes, protective walls and road elevations were carried out in 2005/2006 in the mouth area at the Kirnach power plant. A flood area was created above the Kirnach power plant, which is led past the power plant via a base ramp into the underwater area of ​​the power plant. In the mother bed of the Kirnach 30 m³ / s remain, in the flood area 50 m³ / s flow over a wide area.

Kirnach power station

The small power station Kirnach ( 47 ° 49 '17.9 ″  N , 010 ° 37 ′ 48.6 ″  E ) is a run-of-river power station at the confluence of the Kirnach into the Wertach . The power plant operated by Vereinigte Wertach-Elektrizitätswerke has a bottleneck output of 152 kW at a flow rate of 2.1 m³ / s and is driven by a Kaplan bulb turbine. The usable fall height is 7.05 m. The dam is equipped with an automatic dam with a width of 1.50 m and a height of 1.55 m and is intended for a discharge capacity of approx. 5 m³ / s. ! 547.8216395510.6301675

Weir and turbine come from the Austrian manufacturer Kössler. The power plant was rebuilt in 1999, in 2005/2006 extensive flood protection measures were carried out above the power plant with dikes, protective walls and road elevations.

Individual evidence

  1. ^ [1] Kempten Water Management Office: Ebenhofen flood protection

Web links

Commons : Kirnach_ (Wertach)  - Collection of images, videos and audio files