List of DIN standards / DIN EN ISO
The list of DIN-EN-ISO standards can be found here. For other DIN standards, see the list of DIN standards .
DIN EN ISO 1-9999
- DIN EN ISO 1 reference temperature for geometric product specification and testing
- DIN EN ISO 60 Determination of the apparent density of molding compounds that can flow off through a standardized funnel ( bulk density )
- DIN EN ISO 61 Plastics - Determination of the apparent density of molding compounds that cannot flow off through a given funnel ( plug density )
- DIN EN ISO 62 Plastics - Determination of water absorption
- DIN EN ISO 75 Plastics - Determination of the heat deflection temperature
- Part 1 General test procedure
- Part 2 plastics and hard rubber
- Part 3 Highly resistant, hardenable laminates and long fiber reinforced plastics
- DIN EN ISO 90 Terms and procedures for determining dimensions and volume
- Part 1 hinged lid cans
- Part 2 Resealable metal packaging
- Part 3 aerosol cans
- DIN EN ISO 105 textiles - color fastness tests
- Part A01 General test principles
- Part A04 Method for the instrumental evaluation of the bleeding of the accompanying tissue
- Part A05 Instrumental evaluation of the change in color to determine the gray scale number
- Part A08 Vocabulary of colorimetry
- Part B01 Color fastness to light: daylight
- Part B02 Color fastness to artificial light: Xenon arc light
- Part B03 Color fastness to weathering: outdoor weathering
- Part B04 Color fastness to artificial weathering: Xenon arc light
- Part B05 Detection and determination of photochromism
- Part B06 Color fastness and aging against artificial light at high temperatures: Test with the xenon arc lamp
- Part B07 Color fastness to light of textiles moistened with artificial perspiration
- Part B08 Checking the blue lightfastness types from wool fabrics 1 to 7
- Part B10 Artificial weathering - exposure to filtered xenon arc radiation
- Part C06 Color fastness in household and commercial laundry
- Part C07 Color fastness of wet, pigment-printed textiles to brushing
- Part C08 Color fastness in household and commercial laundry using a phosphate-free test detergent and a bleach activator that works at low temperatures
- Part C09 Color fastness to oxidative bleaching in household and commercial laundry using a phosphate-free test detergent and a bleach activator that works at low temperatures
- Part C10 Color fastness to washing with soap or with soap and soda
- Part C12 Color fastness to industrial laundry
- Part D01 Determination of the fastness to dry cleaning with perchlorethylene solvent
- Part D02 Determination of the rubbing fastness: Organize solvents
- Part E01 color fastness to water
- Part E02 color fastness to sea water
- Part E03 Color fastness to chlorinated water (bathing water in swimming pools)
- Part E04 color fastness to perspiration
- Part E05 Color fastness to stains: acid
- Part E06 Color fastness to stains: alkali
- Part E07 Color fastness to stains: water
- Part E09 color fastness to boiling water (potting fastness)
- Part E12 Color fastness to fulling: Alkaline fulling
- Part E16 Color fastness to water stains on upholstery fabrics
- Part G02 color fastness to combustion gases
- Part G03 Determination of color fastness to ozone in the atmosphere
- Part J01 Basics for measuring body color
- Part J03 Calculation of color differences
- Part J05 Procedure for the instrumental determination of the color inconsistency of a sample when the light type changes (CMCCON02)
- Part P02 Color fastness to pleating: Steam pleating
- Part X12 color fastness to rubbing
- Part X16 color fastness to rubbing; Small areas
- Part X18 Determination of the possibility of yellowing due to phenols
- Part Z06 Assessment of the migration of dyes and pigments
- Part Z07 Determination of the solubility and the resistance to solvents of water-soluble dyes
- DIN EN ISO 128 technical drawings, general principles of representation
- DIN EN ISO 139 Textiles - normal climates for sample preparation and testing
- DIN EN ISO 140 Acoustics - Measurement of sound insulation in buildings and components
- Part 4 Measurement of airborne sound insulation between rooms in buildings
- Part 5 Measurement of the airborne sound insulation of facade elements and facades on buildings
- Part 7 Measurement of the impact sound insulation of ceilings in buildings
- Part 14 Guidelines for special structural conditions
- Part 18 Measurement of the noise caused by rainfall on components in the test bench
- DIN EN ISO 148 Metallic materials - Charpy impact test
- Part 1 test method
- Part 2 testing of the testing machines (pendulum impact testers)
- DIN EN ISO 150 Raw linseed oil, linseed oil and linseed oil varnish for coating materials - requirements and testing
- DIN EN ISO 172 Plastics - Phenolic molded parts - Detection of free ammonia
- DIN EN ISO 175 Plastics - Test method for determining the behavior towards liquid chemicals
- DIN EN ISO 176 Plastics - Determination of plasticizer release - Activated carbon method
- DIN EN ISO 177 Plastics - Determination of the migration of plasticizers
- DIN EN ISO 178 Plastics - Determination of the bending properties
- DIN EN ISO 179 Plastics - Determination of the Charpy impact properties
- Part 1 Non-instrumented impact test
- Part 2 Instrumented Impact Test
- DIN EN ISO 180 Plastics - Determination of the Izod impact strength
- DIN EN ISO 182 Plastics - Determination of the tendency of molding compounds and products based on vinyl chloride homopolymers and copolymers to give off hydrogen chloride and other acidic products at elevated temperatures
- Part 2 pH meter procedures
- Part 3 conductivity method
- Part 4 potentiometric method
- DIN EN ISO 204 Metallic materials - Uniaxial creep test under tensile load - Test method
- DIN EN ISO 216 Writing paper and certain groups of printed matter - Final formats - A and B rows and marking of the machine direction
- DIN EN ISO 225 Mechanical fasteners - Screws and nuts - Dimensioning
- DIN EN ISO 228 pipe thread
- DIN EN ISO 252 conveyor belts - Layer adhesion between the components - Test method
- DIN EN ISO 266 acoustics - standard frequencies
- DIN EN ISO 276 binders for coating materials - linseed oil stand oil - requirements and test methods
- DIN EN ISO 277 Binder for coating materials - Crude wood oil - Requirements and test methods
- DIN EN ISO 283 textile conveyor belts - tensile strength at full belt thickness, elongation at break and elongation with width-related breaking force - test method
- DIN EN ISO 284 conveyor belts - Electrical conductivity - Specification and test methods
- DIN EN ISO 286 Geometrical Product Specifications (GPS) - ISO tolerance system for linear dimensions
- Part 1 Basics for tolerances, dimensions and fits
- Part 2 Tables of the basic tolerance levels and limit dimensions for bores and shafts
- DIN EN ISO 287 Paper and cardboard - Determination of the moisture content of a delivery item - Hot cupboard method
- DIN EN ISO 291 plastics - normal climates for conditioning and testing
- DIN EN ISO 293 Plastics - Compression molded test specimens made from thermoplastics
- DIN EN ISO 294 Plastics - Injection molding of test specimens made of thermoplastics
- Part 1 General principles and production of multipurpose specimens and rods
- Part 2 Small tension bars
- Part 3 Small Plates
- Part 4 Determination of the processing shrinkage
- Part 5 Plastics - Injection molding of test specimens from thermoplastics - Part 5: Production of standard test specimens for determining the anisotropy
- DIN EN ISO 295 Plastics - Pressing test specimens made of thermoset materials
- DIN EN ISO 305 Plastics - Determination of the thermal stability of polyvinyl chloride (PVC), related chlorine-containing homopolymers and copolymers and their molding compounds - Discoloration process
- DIN EN ISO 306 Plastics - Thermoplastics - Determination of the Vicat softening temperature (VST)
- DIN EN ISO 307 Plastics - Polyamides - Determination of the viscosity number
- DIN EN ISO 308 Plastics - Phenolic resin molding compounds - Determination of the acetone-soluble fraction (apparent resin content of molding compounds in the unprocessed state)
- DIN EN ISO 340 conveyor belts - Fire behavior in laboratory tests - Requirements and test methods
- DIN EN ISO 354 Acoustics - Measurement of sound absorption in reverberation rooms
- DIN EN ISO 376 Metallic materials - Calibration of force measuring devices for testing testing machines with uniaxial loading
- DIN EN ISO 377 Steel and steel products - Location and preparation of test sections and specimens for mechanical testing
- DIN EN ISO 385 Laboratory glassware - burettes
- DIN EN ISO 389 Acoustics - Standard reference level for the calibration of audiometric devices
- Part 1 Equivalent reference threshold sound pressure level for pure tones and supra-aural headphones
- Part 2 Equivalent reference threshold sound pressure level for pure tones and insert earphones
- Part 3 equivalent reference threshold force levels for pure tones and bone conduction hearers
- Part 4 Reference level for narrow-band masking noises
- Part 5 equivalent reference threshold sound pressure level for pure tones in the frequency range 8 kHz to 16 kHz
- Part 6 equivalent reference threshold sound pressure level for acoustic short-term test signals
- Part 7 Reference hearing thresholds under free field and diffuse field conditions
- Part 8 Equivalent reference threshold sound pressure level for pure tones and circumaural headphones
- Part 9 Preferred measurement conditions for the determination of reference hearing threshold levels
- DIN EN ISO 407 protective gloves against thermal risks (heat and / or fire)
- DIN EN ISO 439 Steel and iron - Determination of the total silicon content - Gravimetric method
- DIN EN ISO 445 Pallets for the handling of goods - Terms
- DIN EN ISO 463 Geometrical Product Specifications (GPS) - Length measuring devices - Design features and metrological features for mechanical dial indicators
- DIN EN ISO 472 plastics - technical glossary
- DIN EN ISO 483 Plastics - Small chambers for conditioning and testing at constant relative humidity above aqueous solutions
- DIN EN ISO 489 Plastics - Determination of the refractive index
- DIN EN ISO 505 conveyor belts - method for determining the tear strength of textile conveyor belts
- DIN EN ISO 520 Grains and pulses - Determination of the 1000 grain mass
- DIN EN ISO 527 Plastics - Determination of tensile properties
- Part 1 General principles
- Part 2 test conditions for molding and extrusion compounds
- Part 3 test conditions for foils and panels
- Part 4 test conditions for isotropic and anisotropic fiber-reinforced plastic composite materials
- Part 5 test conditions for unidirectional fiber-reinforced plastic composite materials
- DIN EN ISO 534 Paper and cardboard - Determination of thickness, density and specific volume
- DIN EN ISO 535 Paper and cardboard - Determination of the water absorption capacity
- DIN EN ISO 536 Paper and cardboard - Determination of the mass per unit area
- DIN EN ISO 542 Oil seeds - Sampling
- DIN EN ISO 544 welding consumables - technical delivery conditions for welding consumables and powder - type of product, dimensions, tolerances and marking
- DIN EN ISO 580 Plastic piping and protective pipe systems - Injection molded parts made of thermoplastics - Procedure for the visual assessment of the effects of hot storage
- DIN EN ISO 583 textile conveyor belts - total thickness and thickness of the structural elements - test method
- DIN EN ISO 584 Plastics - Unsaturated polyester resins - Determination of reactivity at 80 ° C (conventional method)
- DIN EN ISO 585 Plastics - Cellulose acetate free of plasticizers - Determination of the moisture content
- DIN EN ISO 591 titanium dioxide pigments
- Part 1 requirements and test methods
- DIN EN ISO 595 Reusable medical glass syringes or syringes made of glass and metal
- Part 2 construction, functional requirements and tests
- DIN EN ISO 604 Plastics - Determination of printing properties
- DIN EN ISO 636 welding consumables - rods, wires and weld metal for tungsten inert gas welding of unalloyed steels and fine-grain steels - classification
- DIN EN ISO 638 Paper, cardboard and fibrous material - Determination of dry matter content - Oven method
- DIN EN ISO 642 steel - forehead quenching test (Jominy test)
- DIN EN ISO 643 steel - Microphotographic determination of the recognizable grain size
- DIN EN ISO 648 laboratory glassware - volumetric pipettes
- DIN EN ISO 658 Oil seeds - Determination of the content of impurities
- DIN EN ISO 659 Oil seeds - Determination of the oil content (reference method)
- DIN EN ISO 660 Animal and vegetable fats and oils - Determination of acid number and acidity
- DIN EN ISO 661 Animal and vegetable fats and oils - preparation of the test sample
- DIN EN ISO 662 Animal and vegetable fats and oils - Determination of the content of moisture and volatile components
- DIN EN ISO 663 Animal and vegetable fats and oils - Determination of the proportion of insoluble impurities
- DIN EN ISO 664 Oilseed - Reduction of the laboratory sample to the test sample
- DIN EN ISO 665 Oil seeds - Determination of the content of moisture and volatile components
- DIN EN ISO 669 Resistance welding - Resistance welding equipment - Mechanical and electrical requirements
- DIN EN ISO 676 Spices and seasoning ingredients - Botanical nomenclature
- DIN EN ISO 683 Steels, alloy steels and free-cutting steels intended for heat treatment
- Part 17 rolling bearing steels
- DIN EN ISO 703 conveyor belts - Flexibility in the transverse direction (troughability) - Test method
- DIN EN ISO 707 Milk and milk products - Guidelines for sampling
- DIN EN ISO 712 Grain and grain products - Determination of moisture content - Reference method
- DIN EN ISO 717 Acoustics - Assessment of sound insulation in buildings and components
- Part 1 airborne sound insulation
- Part 2 footfall sound insulation
- DIN EN ISO 734 Oilseed meal - Determination of the oil content
- Part 1 extraction procedure with hexane (or petroleum ether)
- Part 2 rapid extraction process
- DIN EN ISO 748 Hydrometry - Flow measurement in open channels using flow velocity measuring devices or floats
- DIN EN ISO 772 Hydrometry - Terms and symbols
- DIN EN ISO 780 packaging - symbols for handling goods
- DIN EN ISO 787 General test methods for pigments and fillers
- Part 7 Determination of the sieve residue - water method - manual rinsing method
- Part 11 Determination of the tamped volume and the tapped density (1995)
- Part 13 Determination of the water-soluble sulfates, chlorides and nitrates
- Part 14 Determination of the specific resistance of the aqueous extract
- Part 25 Comparison of the color of white, black and colored pigments in pure tone systems - colorimetric method
- DIN EN ISO 801 Pulp - Determination of the commercial weight of delivery items
- Part 1 pulp sheets in bales
- Part 3 big bales
- DIN EN ISO 835 laboratory glassware - graduated pipettes
- DIN EN ISO 844 Hard foams - Determination of the printing properties
- DIN EN ISO 845 Foams made of rubber and plastics - Determination of the bulk density
- DIN EN ISO 846 Plastics - Determination of the effect of microorganisms on plastics
- DIN EN ISO 862 Packaging - Child-resistant packaging - Requirements and test methods for non-resealable packaging for non-pharmaceutical products
- DIN EN ISO 868 Plastics and hard rubber - Determination of indentation hardness with a durometer (Shore hardness)
- DIN EN ISO 877 plastics - outdoor exposure
- Part 1 General Instructions
- Part 2 Weathering and irradiation behind window glass
- Part 3 Accelerated weathering with concentrated solar radiation
- DIN EN ISO 887 Flat washers for metric screws and nuts for general applications - General overview
- DIN EN ISO 898 Mechanical properties of fasteners made of carbon steel and alloy steel
- Part 2 nuts with specified strength classes - regular thread and fine thread
- Part 5 threaded pins and similar connecting elements with thread in specified hardness classes - regular thread and fine thread
- Part 6 nuts with specified test forces; Fine thread, replaced by DIN EN ISO 898-2 in August 2012
- DIN EN ISO 899 Plastics - Determination of creep behavior
- Part 1 creep tensile test
- DIN EN ISO 945 microstructure of cast iron
- Part 1 graphite classification by visual evaluation
- DIN EN ISO 1043 Plastics - Code letters and abbreviations
- Part 1 basic polymers and their special properties
- Part 2 fillers and reinforcing materials
- Part 3 plasticizers
- Part 4 flame retardants
- DIN EN ISO 1101 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerancing of shape, direction, location and course
- DIN EN ISO 1302 Geometrical product specifications, specification of the surface properties in the technical product documentation
- DIN EN ISO 1456 Metallic and other inorganic coatings - Electroplated coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium
- DIN EN ISO 1463 Metal and oxide layers - Layer thickness measurement - Microscopic method
- DIN EN ISO 1513 Coating materials - Testing and preparation of samples
- DIN EN ISO 1514 coating materials - standard sample plates
- DIN EN ISO 1518 Coating materials - Determination of scratch resistance
- Part 1 method with constant load
- Part 2 procedure with continuously increasing load
- DIN EN ISO 1519 Coating materials - mandrel bending test (cylindrical mandrel)
- DIN EN ISO 1520 Coating materials - Cupping test
- DIN EN ISO 1522 Coating materials - pendulum damping test
- DIN EN ISO 1524 Coating materials and printing inks - Determination of the fineness of grind (grain size)
- DIN EN ISO 2062 Textiles - Yarns of packaging units - Determination of the maximum tensile force and maximum tensile force elongation of yarn sections using a testing device with constant deformation rate
- DIN EN ISO 2064 Metallic and other inorganic layers - Definitions and specifications relating to the measurement of layer thickness
- DIN EN ISO 2178 Non-magnetic coatings on magnetic base metals - Measurement of the layer thickness - Magnetic method
- DIN EN ISO 2360 Non-conductive coatings on non-magnetic metallic base materials - Measurement of the layer thickness - Eddy current method
- DIN EN ISO 2361 Electrolytically produced nickel layers on magnetic and non-magnetic base metals - measuring the layer thickness - magnetic method
- DIN EN ISO 2409 Paints and varnishes - Cross-cut test
- DIN EN ISO 2808 Coating materials - Determination of the layer thickness
- DIN EN ISO 3098 Technical product documentation, publications
- Part 0 basic rules
- Part 2 Latin alphabet, numerals and characters
- Part 3 Greek alphabet
- Part 4 Diacritical and special characters in the Latin alphabet
- Part 5 CAD font of the Latin alphabet as well as the digits and characters
- Part 6 Cyrillic alphabet
- DIN EN ISO 3166 codes for the names of countries and their sub-units
- Part 1 codes for country names
- DIN EN ISO 3497 Metallic layers - Layer thickness measurement - X-ray fluorescence method
- DIN EN ISO 3543 Metallic and non-metallic layers - Thickness measurement - Beta backscatter method
- DIN EN ISO 3668 Coating materials - Visual comparison of the color of coatings
- DIN EN ISO 3682 Binders for coating materials - Determination of the acid number - Titrimetric method, June 2002 replaced by DIN EN ISO 2114
- DIN EN ISO 3740 guidelines for the application of the basic standards for determining the sound power level of noise sources
- DIN EN ISO 3744 Acoustics - Determination of the sound power level of noise sources from sound pressure measurements - Enveloping surface method of accuracy class 2 for an essentially free sound field over a reflecting plane
- DIN EN ISO 3882 Metallic and other inorganic coatings - Overview of methods for layer thickness measurement
- DIN EN ISO 4014 hexagon bolts with shank
- DIN EN ISO 4017 hexagon bolts with thread up to the head
- DIN EN ISO 4063 manual arc welding
- DIN EN ISO 4287 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and parameters of the surface texture
- DIN EN ISO 4288 Geometrical Product Specifications (GPS) - Surface quality: Profile method - Rules and procedures for assessing surface quality
- DIN EN ISO 4762 cylinder head screws with hexagon socket
- DIN EN ISO 4892 Plastics - Artificial radiation or weathering in devices
- Part 1 General Instructions
- Part 2 xenon arc lamps
- Part 3 UV fluorescent lamps
- DIN EN ISO 5436 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Normal
- Part 1 measuring standards
- Part 2 software standards
- DIN EN ISO 5492 Sensory Analysis - Vocabulary
- DIN EN ISO 6270 Coating materials - Determination of resistance to moisture
- Part 1 Continuous condensation
- Part 2 procedure for the exposure of samples in condensation climates
- DIN EN ISO 6385 principles of ergonomics for the design of work systems (since 2004 replaces DIN 33400 and the subsequent DIN V ENV 26385: 1990-12)
- DIN EN ISO 7010 safety signs - graphic symbols - safety colors
- DIN EN ISO 7092 Flat Washers - Small Series, Product Class A (formerly DIN 433)
- DIN EN ISO 7093 Flat washers - large series
- Part 1 product class A
- Part 2 product class C
- DIN EN ISO 8256 Plastics - Determination of tensile impact strength
-
DIN EN ISO 8402 quality management, terms (German / English / French) January 2001 replaced by DIN EN ISO 9000
- Supplement 1 Quality Management, Notes on Terms. Withdrawn February 2001 without replacement
- DIN EN ISO 8676 hexagon bolts with thread up to the head and metric fine thread, product classes A and B
- DIN EN ISO 9000 quality management systems , principles and terms
- DIN EN ISO 9001 quality management systems, requirements
- DIN EN ISO 9004 quality management systems, guidelines for performance improvement
- DIN EN ISO 9241 Ergonomic requirements for office work with display devices
- Part 1 General introduction
- Part 2 Requirements for the work tasks - guiding principles
- Part 3 Requirements for visual displays
- Part 4 requirements for keyboards
- Part 5 Requirements for workplace design and posture
- Part 6 Requirements for the working environment
- Part 7 Requirements for visual displays regarding reflections
- Part 8 requirements for color representations
- Part 9 requirements for input devices - except keyboards
- Part 11 Requirements for usability - guiding principles
- Part 12 Presentation of information
- Part 13 user guidance
- Part 14 Dialogue guidance using menus
- Part 15 Dialogue guidance using command languages
- Part 16 Dialogue guidance by means of direct manipulation
- Part 17 Dialogue guidance using screen forms
- Part 110 principles of dialogue design (replaces the previous part 10)
- Part 151 Guidelines for the design of user interfaces for the World Wide Web
- Part 171 guidelines for software accessibility
- Part 300 Introduction to requirements and measurement techniques for electronic optical displays
- Part 302 Terminology for Electronic Optical Displays
- Part 303 requirements for electronic visual displays
- Part 304 user performance test procedures
- Part 305 Optical laboratory test methods for electronic optical displays
- Part 306 On-site assessment procedures for electronic visual displays
- Part 307 Analysis and conformity procedures for electronic visual displays
- Part 309 displays with organic, light-emitting diodes
- Part 400 principles and requirements for physical input devices
- Part 410 design criteria for physical input devices
- DIN EN ISO 9509 Water quality - toxicity test to determine the nitrification inhibition in activated sludge
- DIN EN ISO 9921 Ergonomics - Assessment of voice communication
- DIN EN ISO 9999 Technical aids for disabled people
DIN EN ISO 10000-99999
-
DIN EN ISO 10075 Ergonomic basics with regard to mental workload
- Part 1 General and terms
- Part 2 design principles
- Part 3 Principles and requirements for methods for measuring and recording mental workload
-
DIN EN ISO 10218 Safety of industrial robots
- Part 1 Requirements for the manufacturer
- Part 2 requirements for the integrator
- DIN EN ISO 10545 Ceramic tiles
- Part 1 sample acceptance and basics for acceptance
- Part 2 Determination of dimensions and surface properties
- Part 3 Determination of water absorption, open porosity, apparent relative density and bulk density
- Part 4 Determination of flexural strength and breaking load
- Part 5 Determination of impact strength by measuring the rebound coefficient
- Part 6 Determination of the resistance to deep wear for unglazed tiles
- Part 7 Determination of the resistance to surface wear for glazed tiles and slabs
- Part 8 Determination of the linear thermal expansion
- Part 9 Determination of thermal shock resistance
- Part 10 Determination of moisture expansion
- Part 11 Determination of the resistance to glazing cracks for glazed tiles and slabs
- Part 12 Determination of frost resistance
- Part 13 Determination of chemical resistance
- Part 14 Determination of the resistance to staining
- Part 15 Determination of the release of lead and cadmium
- Part 16 Determination of small color deviations
- DIN EN ISO 10628 flow diagrams for process engineering plants - general rules
- DIN EN ISO 10848 Acoustics - Measurement of the flank transmission of airborne sound and impact sound between neighboring rooms in test stands
- Part 1 framework document
- Part 2 Application to lightweight components when the connection has little influence
- Part 3 Application to lightweight components when the connection has a significant impact
- Part 4 All other cases
- DIN EN ISO 11199 walking aids for two-arm handling
- Part 1 frame
- Part 2 rollators
- Part 3 walkers
- DIN EN ISO 11609 Dentistry - Toothpastes - Requirements, test methods and labeling
- DIN EN ISO 12100 Safety of machines - General principles for design - Risk assessment and risk reduction
- DIN EN ISO 13406 Ergonomic requirements for activities on optical display units in flat construction
- Part 1 introduction
- Part 2 Ergonomic requirements for flat screens
- DIN EN ISO 13407 User-oriented design of interactive systems
- DIN EN ISO 13485 Medical devices - Quality management systems - Requirements for regulatory purposes
- DIN EN ISO 13802 Plastics - Verification of pendulum impact testers - Charpy, Izod and impact tensile tests
- DIN EN ISO 13833 Determination of the ratio of carbon dioxide from biomass (biogenic) and from fossil sources
- DIN EN ISO 13850 Safety of machines - Emergency stop - Principles for design
- DIN EN ISO 14121 Safety of machines - Risk assessment
- Part 1 guiding principles
- DIN EN ISO 14122 Fixed access to machine systems
- Part 1 Choosing a fixed access between two levels
- Part 2 working platforms and catwalks
- Part 3 stairs , stair ladders and railings
- Part 4 Fixed ladders
- DIN EN ISO 14583 pan head screws with hexalobular socket
- DIN EN ISO 14644 clean rooms and associated clean room areas
- Part 1 Classification of air purity
- Part 2 Specifications for testing and monitoring to prove continuous compliance with ISO 14644-1
- Part 3 test method
- Part 4 planning, execution and initial commissioning
- Part 5 operation
- Part 6 terminology
- Part 7 SD modules (clean air hoods, glove boxes, isolators and mini environments)
- Part 8 Classification of airborne molecular contamination
- Part 9 Classification of the particulate surface cleanliness (currently draft)
- DIN EN ISO 14688 Geotechnical exploration and investigation - naming, description and classification of soil
- Part 1 naming and description
- Part 2 Basics for soil classifications
- DIN EN ISO 14689 Geotechnical exploration and investigation - naming, description and classification of rock
- Part 1 naming and description
- DIN EN ISO 14971 Medical Devices - Application of Risk Management to Medical Devices
- DIN EN ISO 15502 Household refrigerators / freezers - Properties and test methods
- DIN EN ISO 15536 Ergonomics - Computer manikins and body contour templates
- Part 1 General Requirements
- Part 2 Testing the functions and validating the dimensions of computer manikin systems
- DIN EN ISO 15854 Dentistry - Cast and base plate waxes
- DIN EN ISO 15883 washer-disinfectors
- Part 1 General requirements, terms and test methods
- Part 2 Requirements and test methods for washer-disinfectors with thermal disinfection for surgical instruments, anesthesia machines , vessels, utensils, glass appliances, etc.
- Part 3 Requirements and test methods for washer-disinfectors with thermal disinfection for containers for human waste
- Part 4 Requirements and test methods for washer-disinfectors with chemical disinfection for thermolabile endoscopes
- Part 5 test soiling and test methods to demonstrate the cleaning effect (e.g. DIN ISO / TS 15883-5)
- Part 6 Requirements and test methods for washer-disinfectors with thermal disinfection for non-invasive, non-critical medical devices and accessories in the healthcare sector (currently draft)
- DIN EN ISO 16911 Emissions from stationary sources - Manual and automatic determination of the speed and the volume flow in flue gas ducts
- Part 1 Manual reference method
- Part 2 Continuous measurement methods
- DIN EN ISO / IEC 17025 General requirements for the competence of testing and calibration laboratories
- DIN EN ISO 17707 Shoes - Test methods for outsoles - Bending behavior
- DIN EN ISO 19011 guidelines for audits of quality management and / or environmental management systems
- DIN EN ISO 19650 Organization and digitization of information on buildings and engineering services, including building information modeling (BIM)
- Part 1 Terms and principles
- Part 2 planning, construction and commissioning phase
- DIN EN ISO 20344 Personal protective equipment - Test methods for shoes
- DIN EN ISO 20345 Personal protective equipment - safety shoes
- DIN EN ISO 20346 Personal protective equipment - protective shoes
- DIN EN ISO 20347 Personal protective equipment - occupational shoes
- DIN EN ISO 20567 Coating materials - Testing the stone chip resistance of coatings
- Part 1 multi-impact test
- Part 2 single impact test with guided impact body
- Part 3 single impact test with free-flying impact body
- DIN EN ISO 22475 Geotechnical exploration and investigation - sampling procedures and groundwater measurements
- Part 1 Technical basics of execution
- Part 2 Qualification criteria for companies and staff
- Part 3 Conformity assessment of companies and staff by a certification body
- DIN EN ISO 22476 Geotechnical exploration and investigation - field investigations
- Part 1 pressure soundings with electrical measuring sensors and measuring devices for the pore water pressure
- Part 2 ramming soundings
- Part 3 Standard Penetration Test
- Part 4 Pressiometer experiment according to Ménard
- Part 5 experiment with the flexible dilatometer
- Part 6 experiment with the self-drilling pressiometer (in preparation)
- Part 7 side print attempt
- Part 8 experiment with the displacement pressure meter (in preparation)
- Part 9 wing shear test
- Part 10 Weight Probing
- Part 11 flat dilatometer experiment
- Part 12 pressure probes with mechanical transducers
- Part 13 load test with flat foundations (in preparation)
- DIN EN ISO 81714 Design of graphic symbols for applications in technical product documentation
- Part 1 basic rules