Socket 479
Socket 479 | |
---|---|
Specifications | |
introduction | November 2001 |
design type | ZIF |
contacts | 479 |
Bus protocol | AGTL + |
Bus cycle | 100 MHz ( Quadpumped , FSB400 ) 133 MHz ( Quadpumped , FSB533 ) |
Operating voltage | variable |
Processors |
Intel Pentium M Intel Celeron M VIA C7 VIA C8 VIA Nano |
The socket 479 (officially mPGA479M ) is the processor socket for Intel's mobile processors series Pentium M as well as Celeron M based on the Banias and Dothan. With the introduction of Intel Core processors, the base was the 479 Socket M replaced.
Socket 479 has openings for 479 pins and is therefore mechanically compatible with all Intel processors in “Micro-FCPGA” housings with a maximum of 479 pins. This means that the “Micro-FCPGA” housing variants of the Socket 478 desktop processors as well as the Socket M and Socket P mobile processors fit mechanically in this CPU socket. However, the pin assignment of these processors differs, so that there is no electrical compatibility. For this reason, for example, a Pentium M mainboard with socket 479 cannot be upgraded with a successor processor from the series of Intel Core processors. In some cases, corresponding adapter kits were offered which enable the operation of mobile processors (Intel Pentium M or Celeron M) in suitable Socket 478 mainboards.
Although always unsocketed, VIA's C7 and C8 processors also use the Socket 479 infrastructure, but with their own VIA-V4 bus protocol. Thus these are incompatible with Intel's AGTL + chipsets. For the VIA Eden , VIA developed a NanoBGA2 package based on the Socket 479, which is also used in the VIA C7 and VIA C8 CPUs.
Web links
Individual evidence
- ↑ a b Micro-FCPGA Socket (mPGA479M) (PDF) Intel, Design Guidelines