User talk:76.255.195.138

See also: x86 assembly language

Intel Core 2 Duo, an example of an x86-compatible and multi-core 64-bit processor.

AMD Athlon (early version), another technically different, but fully compatible x86 implementation.

The generic term x86 refers to the most commercially successful instruction set architecture in the history of personal computing. It derived from the model numbers, ending in "86", of the first few processor generations backward compatible with the original Intel 8086. Since then, many additions and extensions have been added to the x86 instruction set, almost consistently with full backwards compatibility. The architecture has been implemented in processors from Intel, Cyrix, AMD, VIA, and many others.

As the x86 term became common after the introduction of the 80386, it usually implies a binary compatibility with the 32-bit instruction set of the 80386. This may sometimes be emphasized as x86-32 to distinguish it either from the original 16-bit x86-16 or from the newer 64-bit x86-64 (also called x64). Although most x86 processors used in new personal computers and servers have 64-bit capabilities, to avoid compatibility problems with older computers or systems, the term x86-64 is often used to denote 64-bit software, with the term x86 implying only 32-bit.

Today, the x86 architecture is ubiquitous among desktop and notebook computers, as well as a growing majority among servers and workstations. A large amount of software supports the platform, including OSes such as MS-DOS, Windows, Linux, BSD, Solaris, and Mac OS X. The architecture is relatively uncommon in embedded systems however, and low-cost niches such as appliances and toys lack any significant x86 presence. Simpler 16-bit x86 chips are more common here, but AMD's Geode CPU and the new Intel Atom are examples of 32-bit designs used in this segment.

Contrary to some popular belief, x86 is not synonymous with IBM PC compatibility as this also implies a multitude of other hardware, albeit with some of it standardized. For instance, the original Xbox was designed around an x86 processor but security restrictions led to software requirements making it incapable of simply running standard code designed for other IBM PC compatible systems. Also, the GRID Compass laptop (one of the first on the market), and many others, used x86 chips before the IBM PC compatible market even started.

Chronology

The table below lists brands of common consumer targeted processors implementing the x86 instruction set, grouped by generations that highlight important points in x86 history. Note: CPU generations are not strict - each generation is roughly marked by significantly improved or commercially successful processor microarchitecture designs.

Generation	First introduced	Prominent Consumer CPU brands	linear / physical address space	Notable (new) features
1 (IA-16)	1978	Intel 8086, Intel 8088	16-bit / 20-bit (segmented)	first x86 microprocessors
2	1982	Intel 80186, Intel 80188, NEC V20		hardware for fast address calculations, fast mul/div etc
		Intel 80286	16-bit (30-bit virtual) / 24-bit (segmented)	MMU, for protected mode and a larger address space
3 (IA-32)	1985	Intel386, AMD Am386	32-bit (46-bit virtual) / 32-bit	32-bit instruction set, MMU with paging
4	1989	Intel486		risc-like pipelining, integrated FPU, on-chip cache
5	1993	Pentium, Pentium MMX		superscalar, 64-bit databus, faster FPU, MMX
5/6	1996	Cyrix 6x86, Cyrix MII		register renaming, speculative execution
6	1995	Pentium Pro, AMD K5, Nx586 (1994)	as above / 36-bit physical (PAE)	μ-op translation, PAE (not K5, Nx586), integrated L2 cache (not K5, Nx586)
	1997	AMD K6/-2/3, Pentium II/III		L3-cache support, 3D Now, SSE
7	1999	Athlon, Athlon XP		superscalar FPU, wide design (up to three x86 instr./clock)
	2000	Pentium 4		deeply pipelined, high frequency, SSE2, hyper-threading
6-M/7-M	2003	Pentium M, Intel Core		optimized for low power
8 (x86-64)		Athlon 64, Opteron	64-bit / 40-bit physical in first impl.	x86-64 instruction set, on-die memory controller, hypertransport
	2004	Pentium 4 Prescott		very deeply pipelined, very high frequency, SSE3
9	2006	Intel Core 2		low power, multi-core, lower clock frequency, SSE4 (Penryn)
10	2007	AMD Phenom, Intel Core i7	as above / 44-bit physical for Beckton Core i7	monolithic quad-core, 128 bit FPUs, SSE4a, HyperTransport 3 or QuickPath, native memory controller, on-die L3 cache, modular design
?	2008	Intel Atom		In-order but highly pipelined, very-low-power
11	2010	Intel Sandy Bridge, AMD Bulldozer		SSE5/AVX, highly modular design

History

Background

The x86 architecture first appeared as the Intel 8086 CPU released in 1978, a fully 16-bit design based on the earlier Intel 8085. Although not binary compatible, it was designed to allow assembly language programs written for the 8085 be mechanically translated into the equivalent 8086 assembly. This made the new processor a tempting migration path for 8085 hardware and software vendors, but - mainly due to a wider databus - not without significant redesign of system hardware. To address this, Intel introduced the almost identical, but externally 8-bit, 8088 which permitted simpler printed circuit boards, demanded fewer (1-bit wide) DRAM chips, and more easily could be interfaced to already established (i.e. low-cost) 8-bit system and peripheral chips. Among other, non technical factors, this contributed to the fact that IBM built their IBM PC around the 8088, despite a presence of 16-bit microprocessors from Motorola, Zilog, and National Semiconductor. Subsequently, the IBM PC became the dominant personal computer platform and the 8088 and its successors became the dominant CPU architecture for desktop and laptop computers.

Other manufacturers

At various times, companies such as IBM, NEC, AMD, TI, STM, Fujitsu, OKI, Siemens, Cyrix, Intersil, C&T, NexGen, and UMC started to design and/or manufacture x86 processors intended for personal computers as well as embedded systems. Such x86 implementations are seldom plain copies but often employ different internal microarchitectures as well as different solutions at the electronic and physical levels. Quite naturally, early compatible chips were 16-bit, while 32-bit designs appeared much later. For the personal computer market, real quantities started to appear around 1990 with i386 and i486 compatible processors, often named similarly to Intel's original chips. Other companies, which designed or manufactured x86 or x87 processors, include ITT Corporation, National Semiconductor, ULSI System Technology, and Weitek.

Following the fully pipelined i486, Intel introduced the Pentium brand name (which, unlike numbers, could be trademarked) for their new line of superscalar x86 designs. With the x86 naming scheme now legally cleared, IBM partnered with Cyrix to produce the 5x86 and then the very efficient 6x86 (M1) and 6x86MX (MII) lines of Cyrix designs, which were the first x86 chips implementing register renaming to enable speculative execution. AMD meanwhile designed and manufactured the advanced but delayed 5k86 (K5), which, internally, was heavily based on AMD's earlier 29K RISC design; similar to NexGen's Nx586, it used a strategy where dedicated pipeline stages decode x86 instructions into uniform and easily handled micro-operations, a method that has remained the basis for most (not all) x86 designs to this day.

Some early versions of these chips had heat dissipation problems. The 6x86 was also affected by a few minor compatibility issues, the Nx586 lacked an FPU and (the then crucial) pin-compatibility, while the K5 had somewhat disappointing performance when it was (eventually) launched. A low customer awareness of alternatives to the Pentium line further contributed to these designs being comparatively unsuccessful, despite the fact that the K5 had very good Pentium compatibility and the 6x86 was significantly faster than the Pentium on integer code. AMD later managed to establish itself as a serious contender with the K6 line of processors, which gave way to the highly successful Athlon and Opteron. There were also other contenders, such as Centaur Technology, (IDT), Rise Technology, and Transmeta. VIA Technologies' energy efficient C3 and C7 processors, which were designed by Centaur, have been sold for many years, and Centaur newest design, the VIA Nano, is their first processor with superscalar and speculative execution. It was, perhaps interestingly, introduced at about the same time as Intels first "in-order" processor since the original Pentium, the Intel Atom.

Extensions of word size

The architecture has twice been extended to a larger word size. In 1985, Intel released the 32-bit 80386 which gradually replaced the earlier "x86-16" chips (in PCs) during the following years. Intel originally called this architecture i386 but renamed it IA-32 when introducing the (unrelated) 64-bit Itanium architecture called IA-64. In 1999-2003, AMD extended this i386 or x86-32 architecture to 64 bits and referred to it as x86-64 in early documents, and later as AMD64. Intel soon adopted AMD's architectural extensions under the name IA-32e which was later renamed EM64T and finally Intel 64. Among these five(!) names, x86-64 is probably the most commonly used, although Microsoft and Sun Microsystems also use the (perhaps even more vendor-neutral) term x64.

Overview

Basic properties of the architecture

The x86 architecture is a variable instruction length, primarily two-address, "CISC" design with emphasis on backward compatibility. The instruction set is not typical CISC however, but basically an extended and orthogonalized version of the simple eight-bit 8085 architecture. Words are stored in little-endian order and 16-bit and 32-bit accesses are allowed to unaligned memory addresses.

To conserve opcode space, most register-addresses are three bits, and at most one operand can be in memory (some highly orthogonal "CISC" designs, such as the PDP-11, may use two memory operands), but this memory operand may also be the destination, while the other operand, the source, can be either register or immediate. This contributes, among other factors, to a code footprint that rivals eight-bit machines and enables efficient use of instruction cache memory. The relatively small number of general registers (also inherited from 8085) has made register-relative addressing (using small immediate offsets) an important method of accessing operands, especially on the stack. Much work has therefore been invested in making such accesses as fast as register accesses, i.e. a one cycle instruction throughput in most circumstances.

Current implementations

During execution, current x86 processors employ a few extra decoding steps to split most instructions into smaller pieces (micro-operations). These are then handed to a control unit that buffers and schedules them in compliance with x86-semantics so that they can be executed, partly in parallel, by one of several (more or less specialized) execution units. These modern x86 designs are thus superscalar, and also capable of out of order and speculative execution (via register renaming), which means they may execute multiple (partial or complete) x86 instructions simultaneously, and not necessarily in the same order as given in the instruction stream.

When introduced, this approach was sometimes referred to as a "RISC core" or as "RISC translation", partly for marketing reasons, but also because these micro-operations share some properties with certain types of RISC instructions. However, also traditional microcode (used since the 1950s) inherently share many of the same properties! The new approach differs mainly in that the translation to micro-operations now occurs asynchronously. Not having to synchronize the execution units with the decode steps opens up for more analysis of the (buffered) code stream, and therefore permits detection of operations that can be performed in parallel and thus feed more than one execution unit at once.

The latest processors also do the opposite when appropriate; they combine certain x86 sequences (such as a compare followed by a conditional jump) into a more complex μop which fits the execution model better and thus can be executed faster or with less machine resources involved.

Another way to try to improve performance is to cache the decoded micro-operations, so the processor can directly access the decoded micro-operations from a special cache, instead of decoding them again. The Execution Trace Cache found in Intel's NetBurst Microarchitecture (Pentium 4) is so far the only widespread example of this technique.

Transmeta use a completely different method in their x86 compatible CPUs. They use just-in-time translation to convert x86 instructions to the CPU's native instructions. Transmeta argues that their approach allows for more power efficient designs since the CPU can forgo the complicated decode step of more traditional x86 implementations.

Segmentation

Further information: [[:x86 memory segmentation]]

Minicomputers during the late 1970s were running up against the 16-bit 64-KB address limit, as memory had become cheaper. Most such companies therefore redesigned their processors to directly handle 32-bit addressing and data. The original 8086, developed from the simple 8085 microprocessor and primarily aiming at another market, instead adopted segment registers which raised the memory address limit by only 4 bits, to 20 bits (1 megabyte). While the concept of segment registers was not new at the time, as many mainframes used segment register to quickly swap to different tasks, in practice on the x86 it was (is) a much-criticized implementation.

Data and/or code could be managed within "near" 16-bit segments within this 1 MB address space, or a compiler could operate in a "far" mode using 32-bit segment:offset pairs reaching (only) 1 MB. While that would also prove to be quite limiting by the mid-1980s, it was working for the emerging PC market, and made it very simple to translate software from the older 8080, 8085, and Z80 to the newer processor. In 1985, the 16 bit segment addressing model was effectively factored out by the introduction of 32-bit offset registers, in the 386 design.

In real mode, segmentation is achieved by shifting the segment address left by 4 bits and adding an offset in order to receive a final 20-bit address. For example, if DS is A000h and SI is 5677h, DS:SI will point at the absolute address DS × 16 + SI = A5677h. Thus the total address space in real mode is 2²⁰ bytes, or 1 MB, quite an impressive figure for 1978. All memory addresses consist of both a segment and offset; every type of access (code, data, or stack) has a default segment register associated with it (for data the register is usually DS, for code it is CS, and for stack it is SS). For data accesses, the segment register can be explicitly specified (using a segment override prefix) to use any of the four segment registers.

In this scheme, two different segment/offset pairs can point at a single absolute location. Thus, if DS is A111h and SI is 4567h, DS:SI will point at the same A5677h as above. This scheme makes it impossible to use more than four segments at once. CS and SS are vital for the correct functioning of the program, so that only DS and ES can be used to point to data segments outside the program (or, more precisely, outside the currently-executing segment of the program) or the stack.

In protected mode, a segment register no longer contains the physical address of the beginning of a segment, but contain a "selector" that points to a system-level structure called a segment descriptor. A segment descriptor contains the physical address of the beginning of the segment, the length of the segment, and access permissions to that segment. The offset is checked against the length of the segment, with offsets referring to locations outside the segment causing an exception. Offsets referring to locations inside the segment are combined with the physical address of the beginning of the segment to get the physical address corresponding to that offset.

The segmented nature can make programming and compilers design difficult because the use of near and far pointers affect performance.

Addressing modes

Addressing modes for 16-bit x86 processors can be summarized by this formula:

${\begin{Bmatrix}CS:\\DS:\\SS:\\ES:\end{Bmatrix}}{\begin{bmatrix}{\begin{Bmatrix}IP\\BX\\BP\end{Bmatrix}}\end{bmatrix}}+{\begin{bmatrix}{\begin{Bmatrix}SI\\DI\end{Bmatrix}}\end{bmatrix}}+[displacement]$

Addressing modes for 32-bit code on 32-bit or 64-bit x86 processors can be summarized by this formula:

${\begin{Bmatrix}CS:\\DS:\\SS:\\ES:\\FS:\\GS:\end{Bmatrix}}{\begin{bmatrix}{\begin{Bmatrix}EAX\\EBX\\ECX\\EDX\\ESP\\EBP\\ESI\\EDI\end{Bmatrix}}\end{bmatrix}}+{\begin{bmatrix}{\begin{Bmatrix}EAX\\EBX\\ECX\\EDX\\EBP\\ESI\\EDI\end{Bmatrix}}*{\begin{Bmatrix}1\\2\\4\\8\end{Bmatrix}}\end{bmatrix}}+[displacement]$

Addressing modes for 64-bit code on 64-bit x86 processors can be summarized by these formulas:

${\begin{Bmatrix}:\\FS:\\GS:\end{Bmatrix}}{\begin{bmatrix}generalregister\end{bmatrix}}+{\begin{bmatrix}generalregister*{\begin{Bmatrix}1\\2\\4\\8\end{Bmatrix}}\end{bmatrix}}+[displacement]$

and

$RIP+[displacement]$

The 8086 had 64 KB of 8-bit (or alternatively 32 K-word of 16-bit) I/O space, and a 64 KB (one segment) stack in memory supported by hardware. Only words (2 bytes) can be pushed to the stack. The stack grows downwards (toward numerically lower addresses), its bottom being pointed by SS:SP. There are 256 interrupts, which can be invoked by both hardware and software. The interrupts can cascade, using the stack to store the return address.

x86 registers

For a description of the general notion of a CPU register, see Processor register.

16-bit

The original Intel 8086 and 8088 have fourteen 16-bit registers. Four of them (AX, BX, CX, DX) are general registers (although each may have an additional purpose; for example only CX can be used as a counter with the loop instruction). Each can be accessed as two separate bytes (thus BX's high byte can be accessed as BH and low byte as BL). Four segment registers (CS, DS, SS and ES) are used to form a memory address. There are two pointer registers. SP points to the bottom of the stack and BP which is used to point at some other place in the stack or the memory(Offset). Two registers (SI and DI) are for array indexing. The FLAGS register contains flags such as carry flag, overflow flag and zero flag. Finally, the instruction pointer (IP) points to the current instruction.

32-bit

With the advent of the 32-bit 80386 processor, the 16-bit general-purpose registers, base registers, index registers, instruction pointer, and FLAGS register, but not the segment registers, were expanded to 32 bits. This is represented by prefixing an "E" (for Extended) to the register opcodes (thus the expanded AX became EAX, SI became ESI and so on). The general-purpose registers, base registers, and index registers could all be used as the base in addressing modes, and all of those registers except for the stack pointer could be used as the index in addressing modes. Two new segment registers (FS and GS) were added. With a greater number of registers, instructions and operands, the machine code format was expanded. To provide backward compatibility, segments with executable code can be marked as containing either 16-bit or 32-bit instructions. Special prefixes allow inclusion of 32-bit instructions in a 16-bit segment or vice versa.

64-bit

Starting with the AMD Opteron processor, the x86 in 64-bit long mode (as a subset of AMD64 or x86-64 mode) extended the 32-bit registers in a similar way that 32-bit protected mode did before it (RAX, RBX, RCX, RDX, RSI, RDI, RBP, RSP, RFLAGS, RIP). However, AMD also added 8 additional 64-bit general registers (R8, R9, ..., R15). The addressing modes were not dramatically changed from 32-bit mode, except that addressing was extended to 64 bits, physical addressing is now sign extended (so memory always adds equally to the top and bottom of memory; note that this does not affect linear or virtual addressing), and other selector details have been dramatically reduced.

Miscellaneous/Special Purpose

x86 processors also include various special/miscellaneous registers such as control registers (CR0 through 4), debug registers (DR0 through 3, plus 6 and 7), test registers (TR4 through 7), descriptor registers (GDTR, LDTR, IDTR), and a task register (TR).

Purpose

Although the main registers are "general-purpose" and can be used for anything, it was envisaged that they be used for the following purposes:

• AX/EAX/RAX: accumulator
• BX/EBX/RBX: base
• CX/ECX/RCX: counter
• DX/EDX/RDX: data/general
• SI/ESI/RSI: "source index" for string operations.
• DI/EDI/RDI: "destination index" for string operations.
• SP/ESP/RSP: stack pointer for top address of the stack.
• BP/EBP/RBP: stack base pointer for holding the address of the current stack frame.
• IP/EIP/RIP: instruction pointer. Holds the current instruction address.

No particular purposes were envisaged for the other 8 registers available only in 64-bit mode.

Some instructions compile and execute more efficiently when using these registers for their designed purpose. For example, using AL as an accumulator and adding an immediate byte value to it produces the efficient add to AL opcode of 04h, whilst using the BL register produces the generic and longer add to register opcode of 80C3h.

Structure

General Purpose Registers (A, B, C and D)

7	6	5	4	3	2	1	0
R?X
				E?X
						?X
						?H	?L

Segment Registers (C, D, S, E, F, and G)

1	0
?S

Pointer Registers (S and B)

7	6	5	4	3	2	1	0
R?P
				E?P
						?P

Index Registers (S and D)

7	6	5	4	3	2	1	0
R?I
				E?I
						?I

Instruction Pointer Register (I)

7	6	5	4	3	2	1	0
R?P
				E?P
						?P

x86-64-only General Purpose Registers (R8, R9, R10, R11, R12, R13, R14, R15)

7	6	5	4	3	2	1	0
?
				?D

Running X86 Code

x86 code can be test run by placing the code at the boot sector (ie first sector of the physical disk). x86 binary code can be copied into the boot sector using a sector editor.Boot level running of x86 code provides high privilege first hand access to interrupt calls .As high privilege calls and Interrupt calls running under an operating system environment are hooked versions , the code written on a sterile boot environments may not work under OS.

Hello World

Offset 0  1  2  3  4  5  6  7   8  9  A  B  C  D  E  F
0000   31 C0 8E D0 66 BC 00 7C  FB 66 B8 C0 07 8E D8 90   1ÀŽÐf¼.|ûf¸À.ŽØ
0010   B4 00 B0 00 CD 10 B0 00  B4 05 CD 10 B5 00 B1 07   ´.°.Í.°.´.Í.µ.±.
0020   B4 01 CD 10 B6 09 B2 09  B7 00 B4 02 CD 10 8C D8   ´.Í.¶.².·.´.Í.ŒØ
0030   8E C0 B4 13 B0 00 B7 00  B3 0F B9 0C 00 B6 09 B2   ŽÀ´.°.·.³.¹..¶.²
0040   09 BD 50 00 CD 10 B7 00  B4 08 CD 10 EB FE CD 19   .½P.Í.·.´.Í.ëþÍ.
0050   68 65 6C 6C 6F 20 77 6F  72 6C 64 21 90 90 90 90   hello world!....
0060   90 90 90 90 90 90 90 90  90 90 90 90 90 90 90 90   ................
0070   90 90 90 90 90 90 90 90  90 90 90 90 90 90 90 90   ................
0080   90 90 90 90 90 90 90 90  90 90 90 90 90 90 90 90   ................
0090   90 90 90 90 90 90 90 90  90 90 90 90 90 90 90 90   ................
00A0   90 90 90 90 90 90 90 90  90 90 90 90 90 90 90 90   ................
00B0   90 90 90 90 90 90 90 90  90 90 90 90 90 90 90 90   ................
00C0   90 90 90 90 90 90 90 90  90 90 90 90 90 90 90 90   ................
00D0   90 90 90 90 90 90 90 90  90 90 90 90 90 90 90 90   ................
00E0   90 90 90 90 90 90 90 90  90 90 90 90 90 90 90 90   ................
00F0   90 90 90 90 90 90 90 90  90 90 90 90 90 90 90 90   ................
0100   41 75 74 68 6F 72 3A 90  90 90 90 90 90 90 90 90   ................
0110   62 6F 6F 74 40 76 65 6E  74 75 72 6F 6E 2E 6F 72   ................
0120   67 90 90 90 90 90 90 90  90 90 90 90 90 90 90 90   ................
0130   90 90 90 90 90 90 90 90  90 90 90 90 90 90 90 90   ................
0140   4C 69 6E 6B 73 3A 90 90  90 90 90 90 90 90 90 90   ................
0150   77 77 77 2E 62 6F 6F 74  6C 65 76 65 6C 2E 62 6C   ................
0160   6F 67 73 70 6F 74 2E 63  6F 6D 90 90 90 90 90 90   ................
0170   90 90 90 90 90 90 90 90  90 90 90 90 90 90 90 90   ................
0180   77 77 77 2E 76 65 6E 74  75 72 6F 6E 2E 6F 72 67   ................
0190   90 90 90 90 90 90 90 90  90 90 90 90 90 90 90 90   ................
01A0   90 90 90 90 90 90 90 90  90 90 90 90 90 90 90 90   ................
01B0   90 90 90 90 90 90 90 90  90 90 90 90 90 90 90 90   ................
01C0   90 90 90 90 90 90 90 90  90 90 90 90 90 90 90 90   ................
01D0   90 90 90 90 90 90 90 90  90 90 90 90 90 90 90 90   ................
01E0   90 90 90 90 90 90 90 90  90 90 90 90 90 90 90 90   ................
01F0   90 90 90 90 90 90 90 90  90 90 90 90 90 90 55 AA   ..............Uª

More Info

Operating modes

Real mode

Main article: Real mode

Real mode is an operating mode of 80286 and later x86-compatible CPUs. Real mode is characterized by a 20 bit segmented memory address space (meaning that only 1 MB of memory can be addressed), direct software access to BIOS routines and peripheral hardware, and no concept of memory protection or multitasking at the hardware level. All x86 CPUs in the 80286 series and later start up in real mode at power-on; 80186 CPUs and earlier had only one operational mode, which is equivalent to real mode in later chips.

In order to use more than 64 KB of memory, the segment registers must be used. This created great complications for C compiler implementors who introduced odd pointer modes such as "near", "far" and "huge" to leverage the implicit nature of segmented architecture to different degrees, with some pointers containing 16-bit offsets within implied segments and other pointers containing segment addresses and offsets within segments.

Protected mode

Main article: Protected mode

In addition to real mode, the Intel 80286 supports protected mode, expanding addressable physical memory to 16 MB and addressable virtual memory to 1 GB, and providing protected memory, which prevents programs from corrupting one another. This is done by using the segment registers only for storing an index to a segment table. There were two such tables, the Global Descriptor Table (GDT) and the Local Descriptor Table (LDT), each holding up to 8192 segment descriptors, each segment giving access to 64 KB of memory. The segment table provided a 24-bit base address, which can be added to the desired offset to create an absolute address. Each segment can be assigned one of four ring levels used for hardware-based computer security.

The Intel 80386 introduced support in protected mode for paging, a mechanism making it possible to use virtual memory.

Paging and segmented memory access are required for modern multitasking operating systems. Linux, 386BSD and Windows NT were developed for the 386 because it was the first Intel architecture CPU to support paging and 32-bit segment offsets. The 386 architecture became the basis of all further development in the x86 series. The success of Windows 3.0, the first widely accepted version of Microsoft Windows, was largely due to its ability to take advantage of 386 features, even though it was used mainly to run multiple sessions rather than to take advantage of the native 32-bit instruction set.

x86 processors that support protected mode boot into real mode for backward compatibility with the older 8086 class of processors. Upon power-on (aka booting), the processor initiates itself into Real mode, and then it begins loading programs automatically into RAM from ROM and disk. A program inserted somewhere along the boot sequence may be used to put the processor into the Protected mode. The instruction set in protected mode is backward compatible with the one used in real mode.

Virtual 8086 mode

Further information: [[:Virtual 8086 mode]]

There is also a sub-mode of operation in 32-bit Protected mode, called virtual 8086 mode. This is basically a special hybrid operating mode that allows real mode programs and operating systems to run while under the control of a Protected mode supervisor operating system. This allows for a great deal of flexibility in running both Protected mode programs and real mode programs simultaneously. This mode is available in the 32-bit version of Protected mode; virtual 8086 mode does not exist previously in the 16-bit version of Protected mode, or in the 64-bit long mode.

64-bit Long mode

Main article: Long mode

By 2002, it was obvious that the 32-bit address space of the x86 architecture was limiting its performance in applications requiring large data sets. A 32-bit address space would allow the processor to directly address only 4 GB of data, a size surpassed by applications such as video processing and database engines, while using the 64-bit address, one can directly address 16777216 TB (more than 17 billion GB) of data, although most 64-bit architectures don't support access to the full 64-bit address space (AMD64, for example, supports only 48 bits, split into 4 paging levels, from a 64-bit address).

AMD, who would traditionally follow the lead of Intel, took the initiative of extending the 32-bit x86 architecture to 64-bit, initially calling it x86-64, later renaming it AMD64. The Opteron, Athlon 64, Turion 64, and later Sempron families of processors use this architecture. The success of the AMD64 line of processors coupled with the lukewarm reception of the IA-64 architecture forced Intel to release their own x86-64 instruction set. Intel had previously developed an x86-64 instruction set but opted not to enable it in hopes that AMD would not make it to market with theirs before Itanium's new IA-64 instruction set was widely adopted. They branded their extensions EM64T architecture, and later re-branded it Intel 64.

In its literature and product version names, Microsoft and Sun refer to AMD64/Intel 64 collectively as x64 in the Windows and Solaris operating systems respectively. Linux distributions refer to it either as "x86-64", its variant "x86_64", or "amd64". BSD systems use "amd64" while Mac OS X uses "x86_64".

Long mode is mostly an extension of the 32-bit instruction set, but unlike the 16–to–32-bit transition, many instructions were dropped in the 64 bit mode. This does not affect actual binary backward compatibility (which would execute legacy code in other modes that retain support for those instructions), but it changes the way assembler and compilers for new code have to work.

This was the first time that a major upgrade of the x86 architecture was initiated and originated by a manufacturer other than Intel. It was also the first time that Intel accepted technology of this nature from an outside source.

Extensions

Floating point unit

Further information: [[:Floating point unit]]

Initially, IA-32 included floating-point capabilities only on add-on processors (8087, 80287 and 80387.) With the introduction of the 80486, these 8 80x87 floating point registers, known as ST(0) through ST(7) are built in to the CPU. Each register is 80 bits wide and stores numbers in the double extended precision format of the IEEE floating-point standard.

These registers are not accessible directly, but are accessible like a LIFO stack. The register numbers are not fixed, but are relative to the top of the stack; ST(0) is the top of the stack, ST(1) is the next register below the top of the stack, ST(2) is two below the top of the stack, etc. That means that data is always pushed down from the top of the stack, and operations are always done against the top of the stack. Register access had to be done in the stack order, not randomly.

MMX

Main article: MMX (instruction set)

MMX is a SIMD instruction set designed by Intel, introduced in 1997 for Pentium MMX microprocessors. It developed out of a similar unit first used on the Intel i860. It first appeared in the Pentium MMX. It is supported on most subsequent IA-32 processors by Intel and other vendors. MMX is typically used for video applications.

MMX added 8 new "registers" to the architecture, known as MM0 through MM7 (henceforth referred to as MMn). In reality, these new "registers" were just aliases for the existing x87 FPU stack registers. Hence, anything that was done to the floating point stack would also affect the MMX registers. Unlike the FP stack, these MMn registers were fixed, not relative, and therefore they were randomly accessible. The instruction set did not adopt the stack-like semantics so that existing operating systems could still correctly save and restore the register state when multitasking without modifications.

Each of the MMn registers are 64-bit integers. However, one of the main concepts of the MMX instruction set is the concept of packed data types, which means instead of using the whole register for a single 64-bit integer (quadword); two 32-bit integers (doubleword), four 16-bit integers (word) or eight 8-bit integers (byte) may be used. Also because the MMX's 64-bit MMn registers are aliased to the FPU stack, and each of the stack registers are 80-bit wide, the upper 16-bits of the stack registers go unused in MMX, and these bits are set to all ones, which makes it look like NaN's or infinities in the floating point view. This makes it easier to tell whether you are working on a floating point data or MMX data.

3DNow!

Main article: 3DNow!

In 1997 AMD introduced 3DNow! The introduction of this technology coincided with the rise of 3D entertainment applications and was designed to improve the CPU's vector processing performance of graphic-intensive applications. 3D video game developers and 3D graphics hardware vendors use 3DNow! to enhance their performance on AMD's K6 and Athlon series of processors.

3DNow! was designed to be the natural evolution of MMX from integers to floating point. As such, it uses the exact same register naming convention as MMX, that is MM0 through MM7. The only difference is that instead of packing byte to quadword integers into these registers, one would pack single precision floating points into these registers. The advantage of aliasing registers with the FPU registers is that the same instruction and data structures used to save the state of the FPU registers can also be used to save 3DNow! register states. Thus no special modifications are required to be made to operating systems which would otherwise not know about.

SSE

Main articles: Streaming SIMD Extensions, SSE2, SSE3, SSSE3, SSE4, and SSE5

In 1999, Intel introduced the Streaming SIMD Extensions (SSE) instruction set, following in 2000 with SSE2. The first addition made MMX almost obsolete and the second allowed the instructions to be realistically targeted by conventional compilers. Introduced in 2004 along with the Prescott revision of the Pentium 4 processor, SSE3 added specific memory and thread-handling instructions to boost the performance of Intel's HyperThreading technology. AMD licensed the SSE3 instruction set and implemented most of the SSE3 instructions for its revision E and later Athlon 64 processors. The Athlon 64 does not support HyperThreading and lacks those SSE3 instructions used only for HyperThreading.

SSE discarded all legacy connections to the FPU stack. This also meant that this instruction set discarded all legacy connections to previous generations of SIMD instruction sets like MMX. But it freed the designers up, allowing them to use larger registers, not limited by the size of the FPU registers. The designers created eight 128-bit registers, named XMM0 through XMM7. (Note: in AMD64, the number of SSE XMM registers has been increased from 8 to 16.) However, the downside was that operating systems had to have an awareness of this new set of instructions in order to be able to save their register states. So Intel created a slightly modified version of Protected mode, called Enhanced mode which enables the usage of SSE instructions, whereas they stay disabled in regular Protected mode. An OS that is aware of SSE will activate Enhanced mode, whereas an unaware OS will only enter into traditional Protected mode.

SSE is a SIMD instruction set that works only on floating point values, like 3DNow!. However, unlike 3DNow! it severs all legacy connection to the FPU stack. Because it has larger registers than 3DNow!, SSE can pack twice the number of single precision floats into its registers. The original SSE was limited to only single-precision numbers, like 3DNow!. The SSE2 introduced the capability to pack double precision numbers too, which 3DNow! had no possibility of doing since a double precision number is 64-bit in size which would be the full size of a single 3DNow! MMn register. At 128-bit, the SSE XMMn registers could pack two double precision floats into one register. Thus SSE2 is much more suitable for scientific calculations than either SSE1 or 3DNow!, which were limited to only single precision. SSE3 does not introduce any additional registers.

Physical Address Extension (PAE)

Main article: Physical Address Extension

By default, physical addresses are 32-bit, however, there exists a page extension mode called Physical Address Extension or PAE, first added in the Intel Pentium Pro, which allows an additional 4 bits of physical addressing. The size of memory in Protected mode is usually limited to 4 GB. Through tricks in the processor's page and segment memory management systems, x86 operating systems may be able to access more than 32-bits of address space, even without the switchover to the 64-bit paradigm. This mode does not change the length of segment offsets or linear addresses; those are still only 32 bits.

Virtualization

x86 virtualization is difficult because the architecture did not meet the Popek and Goldberg requirements until recently. Nevertheless, there are several commercial x86 virtualization products, such as VMware, Parallels and Microsoft Virtual PC, as well as open source virtualization projects such as QEMU+KQEMU, VirtualBox, Xen. Other methods, such as the Kernel-based Virtual Machine ("KVM"), require newer processors which provide more hardware support for virtualization.

Intel and AMD have introduced x86 processors with hardware-based virtualization extensions that overcome the classical virtualization limitations of the x86 architecture. These extensions are known as Intel VT (IVT or simply VT) that was code named "Vanderpool," and AMD-V that was code named "Pacifica." Although most modern x86 server-based and many modern x86 desktop-based processors include these extensions, the technology is generally considered immature at this point with most software-based virtualization outperforming these extensions. This is expected to change as the technology matures.

See also

• IA-32
• x86 assembly language
• x86 instruction listings
• x87
• Real mode — Unreal mode — Virtual 8086 mode — Protected mode — Long mode
• x86-64
• IA64
• Microarchitecture
• List of Intel microprocessors
• List of AMD microprocessors
• List of VIA microprocessors
• List of x86 manufacturers
• Input/Output Base Address
• Interrupt request

References

• Adams, Keith (2006-21-2006). "A Comparison of Software and Hardware Techniques for x86 Virtualization" (PDF). Proceedings of the International Conference on Architectural Support for Programming Languages and Operating Systems, San Jose, CA, USA, 2006. ACM 1-59593-451-0/06/0010. Retrieved 2006-12-22. {{cite conference}}: Check date values in: |date= (help); Unknown parameter |booktitle= ignored (|book-title= suggested) (help); Unknown parameter |coauthors= ignored (|author= suggested) (help)

• Rosenblum, Mendel (May, 2005). "Virtual machine monitors: current technology and future trends" (PDF). IEEE Computer, volume 38, issue 5. {{cite conference}}: Check date values in: |date= (help); Unknown parameter |booktitle= ignored (|book-title= suggested) (help); Unknown parameter |coauthors= ignored (|author= suggested) (help)

External links

• 25 Years of Intel Architecture
• x86 CPUs guide