square

from Wikipedia, the free encyclopedia
Some types of rectangles

A quadrilateral (also tetragon , Quadrangel or Quadrilateral ) is a figure of the planar geometry , namely a polygon with four corners and four sides. Analogous to triangles, it is also possible to generalize the term quadrangle to non-Euclidean geometries ( curved quadrilaterals). In the projective geometry play full squares and its dual full four-page an important role. In finite geometry , the incidence properties of the quadrangle are used to define the term " generalized quadrilateral ".

Classification

Hierarchy of the squares
Set diagram without tangent squares
Set diagram without dragon squares

A square has two diagonals . If both diagonals lie inside the square, the square is convex , if exactly one diagonal lies outside, the square has a concave corner . The square is the simplest polygon that can be concave. In the case of an overturned square, both diagonals lie outside the square, for example in the case of the crossed trapezoid . Overturned quadrilaterals are generalized polygons and are normally not counted as quadrilaterals. The same applies to degenerate quadrilaterals in which two or more corner points coincide or more than two corner points lie on a straight line .

The sum of the interior angles in the square is 360 °, because each square can be divided into two triangles .

A trapezoid is a square with at least two parallel sides. If two opposite sides are parallel , one speaks of a parallelogram . A rectangle that has four equal interior angles of 90 °, i.e. right angles , is a rectangle . A rectangle that has four sides of equal length is a square . The square is the regular rectangle.

In the dragon square (deltoid) the diagonals are perpendicular to each other, and one diagonal is bisected by the other. This is equivalent to having two pairs of adjacent sides, each of the same length. If there are four equally long sides, one speaks of a rhombus . A square is a diamond with four interior angles of equal size .

In the case of a chordal quadrilateral , the four sides are chords of the circumference . If the four sides are tangents of an inscribed circle , one speaks of a tangent square .

Quantity relationships apply between the individual square types, in particular the partial quantity relationships shown in the figure, for example

  • Squares ⊂ rectangles ⊂ parallelograms trapezoids ⊂ convex quadrilaterals ⊂ quadrilaterals

The squares are a subset of the rectangles , the rectangles are a subset of the parallelograms , etc.

The following relationships also apply to intersections :

  • Squares = rectangles ∩ diamonds
  • Squares = dragon squares ∩ isosceles trapezoids
  • Rectangles = chordal quadrilaterals ∩ parallelograms
  • Rhombuses = dragon squares ∩ trapezoids
  • Rhombuses = tangent quadrilaterals ∩ parallelograms
  • Isosceles trapezoids = quadrilateral tendons ∩ trapezoids

The flat quadrilaterals are classified according to different aspects:

  • according to the characteristics of the interior:
    • convex
    • not convex

The most important properties of the special squares are shown in the following table :

Number of axes of symmetry point symmetrical opposite sides parallel opposite sides of the same length neighboring

Pages equally long

opposite angles are the same neighboring angles are the same size The sum of the opposite side lengths is the same Sum of the opposite angles equal
square 4th Yes in pairs all all all all Yes Yes
rectangle at least 2 Yes in pairs in pairs all all Yes
Rhombus at least 2 Yes in pairs all all in pairs Yes
parallelogram Yes in pairs in pairs in pairs
isosceles trapezoid at least 1 Yes Yes in pairs Yes
Dragon square at least 1 in pairs Yes
Trapezoid Yes
Tendon quadrangle Yes
Tangent square Yes

Formulas

Mathematical formulas for the general square
Area

(see Bretschneider's formula ,
Gaussian trapezoidal formula )

Designations on the square

Length of the diagonal

(see cosine law )

Interior angle

(see cosine law )

A convex quadrilateral can be defined by five independent determinants such as

to be discribed. The four interior angles are an example of non-independent variables , because the fourth interior angle can be calculated from the other three and the sum of the interior angles of 360 °. If non-convex quadrilaterals are also allowed, there are ambiguous combinations, e.g. B. four sides and an interior angle as the side opposite the given angle corner may be convex or concave.

If there is a special square, fewer sizes are sufficient to describe its shape:

Inequalities

For a convex quadrilateral with sides , , , , the diagonal , and the area of the following apply inequalities :

with equality only for rectangles
with equality only for squares
with equality only for squares
with equality only for rectangles
if the tie with only diagonal orthogonal are
with equality only if the diagonals are orthogonal and of equal length

From the formula of Bretschneider follows with the inequality

with equality only for quadrilaterals

main emphasis

Center of gravity in a square
The dotted lines, the point and the centers of gravity and are not required for the alternative solution, they are only used for clarification, e.g. B. the parallelism of the half-line to the diagonal. See animation here

In point symmetrical squares, the parallelograms , which is focusing the center of symmetry , so the diagonal intersection.

In general, one has to distinguish between the corner's center of gravity (all mass sits in the corners , every corner has the same mass) and the centroid (the mass is evenly distributed over the area of the square). In the case of the triangle, these two focal points coincide. There is also the edge center of gravity (the mass is evenly distributed over the edges, the mass of each edge is proportional to its length). However, the edge centroid is rarely considered. Even in the case of the triangle, it does not match the center of gravity of the area and the corner, but instead corresponds to the inscribed center of the central triangle .

The center of gravity of a square can be constructed as follows: The square is divided into two triangles by a diagonal and the center of gravity is determined as the intersection of the bisectors . These two points are connected by a straight line . The same thing is repeated by dividing the square by the other diagonal. The intersection of the two connecting lines is the center of gravity of the quadrangle.

The straight line through the two triangular centers of gravity is a center of gravity of both triangles and thus also of the square. So the focus must be on this straight line.

The corner center of gravity is obtained by connecting the centers of opposite sides. The intersection of the two connecting lines is the corner center of gravity. If a Cartesian coordinate system is given, the coordinates of the corner centroid can be calculated from the coordinates of the corners :

The illustration opposite, constructed similar to that described above, also includes an alternative procedure. For this purpose, the centers of gravity and are to be determined in two intersecting triangles . Finally, a half line is drawn from parallel to the diagonal and a half line from parallel to the diagonal . Thus, the intersection of the two half-lines is the center of the area of the square. This means the dotted lines, the point and the focal points and are not required for the alternative procedure.

See also

Web links

Commons : Square  - collection of images, videos and audio files
Wiktionary: Square  - explanations of meanings, word origins, synonyms, translations

Individual evidence

  1. Hartmut Wellstein: Website of the University of Flensburg, Elementarge Geometry, Priorities of the Triangle, Chapter 1.3.2, as of January 28, 2001 ( Memento of August 15, 2010 in the Internet Archive ), accessed on September 28, 2017
  2. a b Hans Walser: 4 focal points at the square, 4.2 area focal point Fig. 14. In: focal point forum for gifted students March 22 to 24, 2012, TU Berlin. Hans Walser University of Basel, accessed on September 28, 2017 .