List of ISO standards 1–1999: Difference between revisions
Content deleted Content added
deletre most Tag: Reverted |
Set {{DEFAULTSORT}} to ISO standards 1-1999 using Hot Default Sort |
||
(23 intermediate revisions by 17 users not shown) | |||
Line 1: | Line 1: | ||
{{Short description|None}} |
|||
{h ISO 9427] |
|||
{{Main|List of ISO standards}} |
|||
* ISO 3806:1977 Plywood — Determination of moisture content [Withdrawn: replaced with ISO 9425] |
|||
This is a list of published<ref group=Note>This list generally excludes draft versions.<!--Exceptions are those with links to articles--></ref> [[International Organization for Standardization]] (ISO) standards and other deliverables.<ref group=Note>[https://www.iso.org/deliverables-all.html ISO deliverables] include "specifications" (ISO/PAS, ISO/TS), "reports" (ISO/TR), etc, which are not referred to by ISO as "standards".</ref> For a complete and up-to-date list of all the ISO standards, see the ISO catalogue.<ref>{{cite web|url=https://www.iso.org/standards-catalogue/browse-by-ics.html|title=Standards catalogue|publisher=[[International Organization for Standardization|ISO]]}}</ref> |
|||
* ISO 3807:2013 Gas cylinders — Acetylene cylinders — Basic requirements and type testing |
|||
* ISO 3808:2002 Road vehicles — Unscreened high-voltage ignition cables — General specifications, test methods and requirements |
|||
* ISO 3809:2004 Oil of lime (cold pressed), Mexican type (Citrus aurantifolia (Christm.) Swingle), obtained by mechanical means |
|||
* ISO 3810:1987 Floor tiles of agglomerated cork — Methods of test |
|||
* ISO 3811:1979 Meat and meat products — Detection and enumeration of presumptive coliform bacteria and presumptive Escherichia coli — (Reference method) [Withdrawn: replaced with ISO 4831, ISO 4832, and ISO 7251] |
|||
* ISO 3812:1976 Essential oils of geranium and rose — Determination of ester value after hot formylation |
|||
* ISO 3813:2004 Resilient floor coverings — Cork floor tiles — Specification |
|||
* ISO/TS 3814:2014 Standard tests for measuring reaction-to-fire of products and materials — Their development and application |
|||
* ISO 3815 Zinc and zinc alloys |
|||
** ISO 3815-1:2005 Part 1: Analysis of solid samples by optical emission spectrometry |
|||
** ISO 3815-2:2005 Part 2: Analysis by inductively coupled plasma optical emission spectrometry |
|||
* ISO 3816:1976 Zinc ingots — Selection and preparation of samples for spectrographic analysis [Withdrawn: replaced with ISO 20081] |
|||
* ISO 3817:1976 Zinc alloy ingots — Selection and preparation of samples for spectrographic analysis [Withdrawn: replaced with ISO 20081] |
|||
* ISO/TR 3818:1977 Ropes and cordage — Rope assemblies used in slinging — Safe working loads [Withdrawn without replacement] |
|||
* ISO 3819:2015 Laboratory glassware – Beakers |
|||
* ISO 3820:1978 Cinematography — Sprockets for 8 mm Type S motion-picture film — Dimensions and design |
|||
* ISO 3821:2019 Gas welding equipment — Rubber hoses for welding, cutting and allied processes |
|||
* ISO 3822 Acoustics – Laboratory tests on noise emission from appliances and equipment used in water supply installations |
|||
** ISO 3822-1:1999 Part 1: Method of measurement |
|||
** ISO 3822-2:1995 Part 2: Mounting and operating conditions for draw-off taps and mixing valves |
|||
** ISO 3822-3:2018 Part 3: Mounting and operating conditions for in-line valves and appliances |
|||
** ISO 3822-4:1997 Part 4: Mounting and operating conditions for special appliances |
|||
* ISO 3823 Dental rotary instruments — Burs |
|||
** ISO 3823-1:1997 Part 1: Steel and carbide burs |
|||
** ISO 3823-2:2003 Part 2: Finishing burs |
|||
* ISO 3824:1984 Dental silicophosphate cement (hand-mixed) [Withdrawn: replaced with ISO 9917] |
|||
* ISO 3825:1977 Glass transfusion bottles for medical use — Chemical resistance [Withdrawn without replacement] |
|||
* ISO 3826 Plastics collapsible containers for human blood and blood components |
|||
** ISO 3826-1:2013 Part 1: Conventional containers |
|||
** ISO 3826-2:2008 Part 2: Graphical symbols for use on labels and instruction leaflets |
|||
** ISO 3826-3:2006 Part 3: Blood bag systems with integrated features |
|||
** ISO 3826-4:2015 Part 4: Aphaeresis blood bag systems with integrated features |
|||
* ISO 3827 Shipbuilding — Co-ordination of dimensions in ships' accommodation |
|||
** ISO 3827-1:1977 Part 1: Principles of dimensional co-ordination |
|||
** ISO 3827-2:1977 Part 2: Glossary of terms |
|||
** ISO 3827-3:1977 Part 3: Co-ordinating sizes for components and assemblies |
|||
** ISO 3827-4:1977 Part 4: Controlling dimensions |
|||
** ISO 3827-5:1979 Part 5: Co-ordinating sizes for key components |
|||
* ISO 3828:2008 Shipbuilding and marine structures – Deck machinery – Vocabulary and symbols |
|||
* ISO 3829 Petroleum products – Determination of density and relative density – Jaulmes pyknometer method [Rejected draft] |
|||
* ISO 3830:1993 Petroleum products — Determination of lead content of gasoline — Iodine monochloride method |
|||
* ISO 3831:1979 Timekeeping instruments — Classification and numbering system and nomenclature of components for watches and clocks [Withdrawn without replacement] |
|||
* ISO 3832:2002 Passenger cars — Luggage compartments — Method of measuring reference volume |
|||
* ISO 3833:1977 Road vehicles – Types – Terms and definitions |
|||
* ISO 3834 Quality requirements for fusion welding of metallic materials |
|||
** ISO 3834-1:2021 Part 1: Criteria for the selection of the appropriate level of quality requirements |
|||
** ISO 3834-2:2021 Part 2: Comprehensive quality requirements |
|||
** ISO 3834-3:2021 Part 3: Standard quality requirements |
|||
** ISO 3834-4:2021 Part 4: Elementary quality requirements |
|||
** ISO 3834-5:2021 Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 |
|||
* ISO 3835 Equipment for vine cultivation and wine making – Vocabulary |
|||
** ISO 3835-1:1976 (No part title) |
|||
** ISO 3835-2:1977 (No part title) [Withdrawn without replacement] |
|||
** ISO 3835-3:1980 (No part title) |
|||
** ISO 3835-4:1981 (No part title) |
|||
** ISO 3835-5:1982 (No part title) [Withdrawn without replacement] |
|||
* ISO/TR 3836:1978 Shoe sizes — System of width grading (for use in the Mondopoint system) [Withdrawn without replacement] |
|||
* ISO 3837:1993 Liquid petroleum products — Determination of hydrocarbon types — Fluorescent indicator adsorption method |
|||
* ISO 3838:2004 Crude petroleum and liquid or solid petroleum products — Determination of density or relative density — Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods |
|||
* ISO 3839:1996 Petroleum products — Determination of bromine number of distillates and aliphatic olefins — Electrometric method |
|||
* ISO 3840:1976 Petroleum distillates — Determination of olefinic plus aromatic hydrocarbons content [Withdrawn without replacement] |
|||
* ISO 3841:1977 Petroleum waxes — Determination of melting point (cooling curve) [Withdrawn without replacement] |
|||
* ISO 3842:2006 Road vehicles — Fifth wheels — Interchangeability |
|||
* ISO 3843 Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light [Draft named ISO 2135 as it was a revision of ISO/R 2135] |
|||
* ISO 3844:1975 Shoe sizes — Method of marking [Withdrawn: replaced with ISO 9407] |
|||
* ISO 3845 Petroleum and natural gas industries — High-test steel line pipe [Rejected draft] |
|||
* ISO 3846:2008 Hydrometry – Open channel flow measurement using rectangular broad-crested weirs |
|||
* ISO 3847:1977 Liquid flow measurement in open channels by weirs and flumes – End-depth method for estimation of flow in rectangular channels with a free overfall [Withdrawn: replaced with ISO 18481] |
|||
* ISO 3848:2016 Essential oil of citronella, Java type |
|||
* ISO 3849:2003 Oil of citronella, Sri Lankan type (Cymbopogon nardus (L.) W. Watson var. lenabatu Stapf.) |
|||
* ISO 3850:2004 Resilient floor coverings – Determination of apparent density of composition cork |
|||
* ISO 3851:1977 Capsulated dental silicate and silico-phosphate filling materials [Withdrawn: replaced with ISO 9917] |
|||
* ISO 3852:2007 Iron ores for blast furnace and direct reduction feedstocks — Determination of bulk density |
|||
* ISO 3853:1994 Road vehicles — Towing vehicle coupling device to tow caravans or light trailers — Mechanical strength test |
|||
* ISO 3854:1976 Road vehicles — Caravans and light trailers — Vacuum braking — Measurement of reaction time [Withdrawn without replacement] |
|||
* ISO 3855:1977 Milling cutters – Nomenclature |
|||
* ISO 3856 Paints and varnishes — Determination of "soluble" metal content |
|||
** ISO 3856-1:1984 Part 1: Determination of lead content — Flame atomic absorption spectrometric method and dithizone spectrophotometric method |
|||
** ISO 3856-2:1984 Part 2: Determination of antimony content — Flame atomic absorption spectrometric method and Rhodamine B spectrophotometric method |
|||
** ISO 3856-3:1984 Part 3: Determination of barium content — Flame atomic emission spectrometric method |
|||
** ISO 3856-4:1984 Part 4: Determination of cadmium content — Flame atomic absorption spectrometric method and polarographic method |
|||
** ISO 3856-5:1984 Part 5: Determination of hexavalent chromium content of the pigment portion of the liquid paint or the paint in powder form — Diphenylcarbazide spectrophotometric method |
|||
** ISO 3856-6:1984 Part 6: Determination of total chromium content of the liquid portion of the paint — Flame atomic absorption spectrometric method |
|||
** ISO 3856-7:1984 Part 7: Determination of mercury content of the pigment portion of the paint and of the liquid portion of water-dilutable paints — Flameless atomic absorption spectrometric method |
|||
* ISO 3857 Compressors, pneumatic tools and machines – Vocabulary |
|||
** ISO 3857-1:1977 Part 1: General |
|||
** ISO 3857-2:1977 Part 2: Compressors |
|||
** ISO 3857-3:1989 Part 3: Pneumatic tools and machines |
|||
** ISO 3857-4:2012 Part 4: Air treatment |
|||
* ISO 3858:2018 Rubber compounding ingredients — Carbon black — Determination of light transmittance of toluene extract |
|||
* ISO 3859:2000 Inverse dovetail cutters and dovetail cutters with cylindrical shanks |
|||
* ISO 3860:2011 Bore cutters with key drive — Form milling cutters with constant profile |
|||
* ISO 3861:2005 Rubber hoses and hose assemblies for sand and grit blasting — Specification |
|||
* ISO 3862:2020 Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids — Specification |
|||
* ISO 3863:1989 Cylindrical cork stoppers — Dimensional characteristics, sampling, packaging and marking [Withdrawn without replacement] |
|||
* [[ISO 3864]] Graphical symbols – Safety colours and safety signs |
|||
* ISO 3865:2020 Rubber, vulcanized or thermoplastic — Methods of test for staining in contact with organic material |
|||
* ISO 3866:1977 Office machines and printing machines used for information processing – Widths of fabric printing ribbons on spools exceeding 19 mm |
|||
* ISO 3867:2017 Composition cork — Expansion joint fillers — Test methods |
|||
* ISO 3868:1976 Metallic and other non-organic coatings — Measurement of coating thicknesses — Fizeau multiple-beam interferometry method |
|||
* ISO 3869:2017 Agglomerated cork — Expansion joint fillers — Specifications, packaging and marking |
|||
* ISO 3870:1976 Conveyor belts (fabric carcass), with length between pulley centres up to 300 m, for loose bulk materials — Adjustment of take-up device [Withdrawn without replacement] |
|||
* ISO 3871:2000 Road vehicles — Labelling of containers for petroleum-based or non-petroleum-based brake fluid |
|||
* ISO 3872:1976 Graphic technology — Sheet-fed printing machines — Range of sizes [Withdrawn without replacement] |
|||
* ISO 3873:1977 Industrial safety helmets |
|||
* ISO 3874:2017 Series 1 freight containers — Handling and securing |
|||
* ISO 3875:2020 Machine tools — Test conditions for external cylindrical centreless grinding machines — Testing of the accuracy |
|||
* ISO 3876:1986 Shipbuilding — Inland vessels — Hand-holes |
|||
* ISO 3877 Tyres, valves and tubes – List of equivalent terms |
|||
** ISO 3877-1:1997 Part 1: Tyres |
|||
** ISO 3877-2:1997 Part 2: Tyre valves |
|||
** ISO 3877-3:1978 Part 3: Tubes |
|||
** ISO 3877-4:1984 Part 4: Solid tyres |
|||
* ISO 3878:1983 Hardmetals — Vickers hardness test [Withdrawn without replacement] |
|||
* ISO 3879:1977 Welded joints — Recommended practice for liquid penetrant testing [Withdrawn: replaced with ISO 3452] |
|||
* ISO 3880 Building construction – Stairs – Vocabulary |
|||
** ISO 3880-1:1977 [Withdrawn without replacement] |
|||
* ISO 3881:1977 Building construction — Modular co-ordination — Stairs and stair openings — Co-ordinating dimensions |
|||
* ISO 3882:2003 Metallic and other inorganic coatings — Review of methods of measurement of thickness |
|||
* ISO 3883:1977 Office machines – Line and character capacity of address masters |
|||
* ISO/DIS 3884:1975 Plastic<ref>{{cite book|title=UNISIST Guide to Standards for Information Handling Part 2 |isbn = 9789231018336|url=https://books.google.com/books?id=Mu_gAAAAMAAJ&q=ISO+/+DIS+3884%E2%80%931975+Plastic|author1 = Unesco|year = 1980}}</ref> |
|||
* ISO 3886:1986 Iron ores — Determination of manganese content — Periodate spectrophotometric method [Withdrawn: replaced with ISO 9682-2] |
|||
* ISO 3887:2007 Steels — Determination of the depth of decarburization |
|||
* ISO 3888 Passenger cars — Test track for a severe lane-change manoeuvre |
|||
** ISO 3888-1:2018 Part 1: Double lane-change |
|||
** ISO 3888-2:2011 Part 2: Obstacle avoidance |
|||
* ISO 3889:2006 Milk and milk products — Specification of Mojonnier-type fat extraction flasks |
|||
* ISO 3890 Milk and milk products — Determination of residues of organochlorine compounds (pesticides) |
|||
** ISO 3890-1:2009 Part 1: General considerations and extraction methods |
|||
** ISO 3890-2:2009 Part 2: Test methods for crude extract purification and confirmation |
|||
* ISO 3891:1978 Acoustics — Procedure for describing aircraft noise heard on the ground [Withdrawn without replacement] |
|||
* ISO 3892:2000 Conversion coatings on metallic materials — Determination of coating mass per unit area — Gravimetric methods |
|||
* ISO 3893:1977 Concrete — Classification by compressive strength [Withdrawn without replacement] |
|||
* ISO 3894:2015 Road vehicles — Wheels/rims for commercial vehicles — Test methods |
|||
* ISO 3895:1986 Road vehicles — Screened and waterproof spark-plug and its connection — Type 2 |
|||
* ISO 3896:1986 Road vehicles — Screened and waterproof spark-plug and its connection — Type 3 |
|||
* ISO 3897:1997 Photography — Processed photographic plates — Storage practices [Withdrawn: replaced with ISO 18918] |
|||
* ISO 3898:2013 Bases for design of structures — Names and symbols of physical quantities and generic quantities |
|||
* ISO 3899:2005 Rubber — Nitrile latex — Determination of residual acrylonitrile content |
|||
* ISO 3900:1995 Rubber — Nitrile latex — Determination of bound acrylonitrile content |
|||
* [[ISO 3901]]:2019 Information and documentation – [[International Standard Recording Code]] (ISRC) |
|||
* ISO 3902:1990 Shipbuilding and marine structures — Gaskets for rectangular windows and side scuttles |
|||
* ISO 3903:2012 Ships and marine technology — Ships' ordinary rectangular windows |
|||
* ISO 3904:1990 Shipbuilding and marine structures — Clear-view screens |
|||
* ISO 3905:1980 Paints and varnishes — Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using black and white charts) [Withdrawn: replaced with ISO 6504-3] |
|||
* ISO 3906:1980 Paints and varnishes — Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using polyester film) [Withdrawn: replaced with ISO 6504-3] |
|||
* ISO 3907:2009 Hardmetals — Determination of total carbon — Gravimetric method |
|||
* ISO 3908:2009 Hardmetals — Determination of insoluble (free) carbon — Gravimetric method |
|||
* ISO 3909:1976 Hardmetals — Determination of cobalt — Potentiometric method |
|||
* ISO 3910:1983 Rubber boots, unlined moulded [Withdrawn without replacement] |
|||
* ISO 3911:2021 Wheels and rims for pneumatic tyres – Vocabulary, designation and marking |
|||
* ISO 3912:1977 Woodruff keys and keyways [Withdrawn without replacement] |
|||
* ISO 3913:1977 Shipbuilding — Welded steel bollards |
|||
* ISO 3914 Textile machinery and accessories — Cylindrical tubes |
|||
** ISO 3914-1:1994 Part 1: Recommended main dimensions |
|||
** ISO 3914-2:1994 Part 2: Dimensions, tolerances and designation of tubes for open-end spinning machines |
|||
** ISO 3914-3:1994 Part 3: Dimensions, tolerances and designation of tubes for tape yarns |
|||
** ISO 3914-4:1994 Part 4: Dimensions, tolerances and designation of tubes for textured yarns [Withdrawn without replacement] |
|||
** ISO 3914-5:1994 Part 5: Dimensions, tolerances and designation of tubes for continuous spin-drawn synthetic filament yarns [Withdrawn without replacement] |
|||
** ISO 3914-6:1994 Part 6: Dimensions, tolerances and designation of tubes for cross-wound packages in winding and twisting [Withdrawn without replacement] |
|||
** ISO 3914-7:1994 Part 7: Dimensions, tolerances and designation of perforated tubes for cheese dyeing |
|||
* ISO 3915:2022 Plastics — Measurement of resistivity of conductive plastics |
|||
* ISO 3916:1977 Shipbuilding — Inland navigation — Rope tubs [Withdrawn without replacement] |
|||
* ISO 3917:2016 Road vehicles — Safety glazing materials — Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering |
|||
* ISO 3918:2007 Milking machine installations – Vocabulary |
|||
* ISO 3919:2005 Coated abrasives — Flap wheels with shaft |
|||
* ISO 3920:1976 Honing stones of square section — Designation and dimensions [Withdrawn: replaced with ISO 603-(1-16)] |
|||
* ISO 3921:1976 Honing stones of rectangular section — Designation and dimensions [Withdrawn: replaced with ISO 603-(1-16)] |
|||
* ISO 3922:1978 Continuous mechanical handling equipment — Rotary vane feeder — Dimensional specifications [Withdrawn without replacement] |
|||
* ISO 3923 Metallic powders — Determination of apparent density |
|||
** ISO 3923-1:2018 Part 1: Funnel method |
|||
** ISO 3923-2:1981 Part 2: Scott volumeter method |
|||
** ISO 3923-3:1986 Part 3: Oscillating funnel method [Withdrawn without replacement] |
|||
* ISO 3924:2019 Petroleum products — Determination of boiling range distribution — Gas chromatography method |
|||
* ISO 3925:2014 Unsealed radioactive substances — Identification and documentation |
|||
* ISO 3926:1980 Shipbuilding — Inland navigation — Couplings for oil and fuel reception — Mating dimensions |
|||
* ISO 3927:2017 Metallic powders, excluding powders for hardmetals — Determination of compressibility in uniaxial compression |
|||
* ISO 3928:2016 Sintered metal materials, excluding hardmetals — Fatigue test pieces |
|||
* ISO 3929:2003 Road vehicles — Measurement methods for exhaust gas emissions during inspection or maintenance |
|||
* ISO 3930:2000 Instruments for measuring vehicle exhaust emissions [Withdrawn without replacement] |
|||
* ISO 3931 Fibre building boards – Determination of transversal internal bond [Rejected draft] |
|||
* ISO 3932:1976 Textiles — Woven fabrics — Measurement of width of pieces [Withdrawn: replaced with ISO 22198] |
|||
* ISO 3933:1976 Textiles — Woven fabrics — Measurement of length of pieces [Withdrawn: replaced with ISO 22198] |
|||
* ISO 3934:2021 Rubber, vulcanized and thermoplastic — Preformed gaskets used in buildings — Classification, specifications and test methods |
|||
* ISO 3935:1977 Shipbuilding — Inland navigation — Fire-fighting water system — Pressures [Withdrawn without replacement] |
|||
* ISO 3936:1993 Reduction sleeves with tenon drive with external and internal 7/24 taper — Dimensions |
|||
* ISO 3937 Cutter arbors with tenon drive |
|||
** ISO 3937-1:2008 Part 1: Dimensions of Morse taper |
|||
** ISO 3937-2:2008 Part 2: Dimensions of 7/24 taper |
|||
** ISO 3937-3:2008 Part 3: Dimensions of hollow taper interface with flange contact surface |
|||
* ISO 3938:1986 Hydraulic fluid power — Contamination analysis — Method for reporting analysis data [Withdrawn without replacement] |
|||
* ISO 3939:1977 Fluid power systems and components — Multiple lip packing sets — Methods for measuring stack heights |
|||
* ISO 3940:1977 Tapered die-sinking cutters with parallel shanks |
|||
* ISO 3941:1977 Classification of fires |
|||
* ISO 3942:1976 Photographic grade sodium carbonate, monohydrate — Specification [Withdrawn: replaced with ISO 424] |
|||
* ISO 3943:1993 Photography — Processing chemicals — Specifications for anhydrous sodium acetate |
|||
* ISO 3944:1992 Fertilizers — Determination of bulk density (loose) |
|||
* ISO 3945:1985 Mechanical vibration of large rotating machines with speed range from 10 to 200 r/s — Measurement and evaluation of vibration severity in situ [Withdrawn: replaced with ISO 10816-1] |
|||
* ISO 3946:1982 Starches and derived products — Determination of total phosphorus content — Spectrophotometric method |
|||
* ISO 3947:1977 Starches, native or modified — Determination of total fat content |
|||
* ISO 3948:1977 Shipbuilding — Inland vessels — Compressed-air systems — Pressure ranges |
|||
* ISO 3949:2020 Plastics hoses and hose assemblies — Textile-reinforced types for hydraulic applications — Specification |
|||
* [[ISO 3950]]:2016 Dentistry – Designation system for teeth and areas of the oral cavity |
|||
* ISO 3951 Sampling procedures for inspection by variables |
|||
** ISO 3951-1:2013 Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
|||
** ISO 3951-2:2013 Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics |
|||
** ISO 3951-3:2007 Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
|||
** ISO 3951-4:2011 Part 4: Procedures for assessment of declared quality levels |
|||
** ISO 3951-5:2006 Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation) |
|||
* ISO 3952 Kinematic diagrams – Graphical symbols |
|||
** ISO 3952-1:1981 (Motion of links of mechanisms; Kinematic pairs; Links and connections of their components; Linkage of bars and their links) |
|||
** ISO 3952-2:1981 (Friction and gear mechanisms; Cam mechanisms) |
|||
** ISO 3952-3:1979 (Maltese and ratchet mechanisms; Couplings and brakes) |
|||
** ISO 3952-4:1984 (Miscellaneous mechanisms and their components) |
|||
* ISO 3953:2011 Metallic powders — Determination of tap density |
|||
* ISO 3954:2007 Powders for powder metallurgical purposes — Sampling |
|||
* ISO 3955:1977 Sintered metal materials, excluding hardmetals — Sampling [Withdrawn without replacement] |
|||
* ISO/TR 3956:1975 Principles of structural fire-engineering design with special regard to the connection between real fire exposure and the heating conditions of the standard fire-resistance test (ISO 834) |
|||
* ISO 3957 Reaction to fire tests — Façades — Measurement of heat and smoke generation in severe exterior fire scenarios [Under development; originally planned ISO 3957 Graphic symbols — Index, survey, and compilation of the single sheets became ISO 7000] |
|||
* ISO 3958:1996 Passenger cars — Driver hand-control reach |
|||
* ISO 3959:1977 Green bananas — Ripening conditions |
|||
* ISO 3960:2017 Animal and vegetable fats and oils — Determination of peroxide value — Iodometric (visual) endpoint determination |
|||
* ISO 3961:2018 Animal and vegetable fats and oils — Determination of iodine value |
|||
* ISO 3962:1977 Materials and equipment for petroleum and natural gas industries — Tool joints for steel drill pipe for oil or natural gas wells [Withdrawn without replacement] |
|||
* ISO 3963:1977 Fertilizers — Sampling from a conveyor by stopping the belt |
|||
* ISO 3964:2016 Dentistry — Coupling dimensions for handpiece connectors |
|||
* ISO 3965:1990 Agricultural wheeled tractors — Maximum speeds — Method of determination |
|||
* ISO 3966:2020 Measurement of fluid flow in closed conduits – Velocity area method using Pitot static tubes |
|||
* ISO 3967 Petroleum products – Determination of density and relative density – Bingham pyknometer method [Rejected draft] |
|||
* ISO 3968:2017 Hydraulic fluid power — Filters — Evaluation of differential pressure versus flow |
|||
* ISO 3969:1979 Shipbuilding — Inland vessels — Operational documentation |
|||
* ISO 3970:1977 Modular units for machine tool construction — Integral way columns — Floor-mounted type |
|||
* ISO 3971:1977 Rice milling — Symbols and equivalent terms [Withdrawn without replacement] |
|||
* ISO 3972:2011 Sensory analysis — Methodology — Method of investigating sensitivity of taste |
|||
* ISO 3973:1996 Living animals for slaughter — Vocabulary — Bovines [Withdrawn without replacement] |
|||
* ISO 3974:1977 Definitions of living animals for slaughter — Ovines |
|||
* ISO 3975:1977 Definitions of living animals for slaughter — Horses [Withdrawn without replacement] |
|||
* ISO 3976:2006 Milk fat — Determination of peroxide value |
|||
* [[ISO 3977]] Gas turbines – Procurement |
|||
* ISO 3978:1976 Aluminium and aluminium alloys — Determination of chromium — Spectrophotometric method using diphenylcarbazide, after extraction |
|||
* ISO 3979:1977 Aluminium and aluminium alloys — Determination of nickel — Spectrophotometric method using dimethylglyoxime [Withdrawn without replacement] |
|||
* ISO 3980:1977 Aluminium and aluminium alloys — Determination of copper — Atomic absorption spectrophotometric method |
|||
* ISO 3981:1977 Aluminium and aluminium alloys — Determination of nickel — Atomic absorption spectrophotometric method |
|||
* ISO 3982 Chemical analysis of aluminum and its alloys — Complexometric determination of mangesium [Rejected draft] |
|||
* ISO 3983:1977 Cereals and cereal products — Determination of alpha-amylase activity — Colorimetric method [Withdrawn without replacement] |
|||
* ISO 3984:2004 Road vehicles — Rear moving barrier impact test procedure [Withdrawn without replacement] |
|||
* ISO/TR 3985:2021 Biotechnology — Data publication — Preliminary considerations and concepts [originally planned ISO 3985 was a rejected draft with an unknown name] |
|||
* ISO 3986 Petroleum products — Lubricating wax — Determination of cone penetration [Rejected draft] |
|||
* ISO 3987:2010 Petroleum products — Determination of sulfated ash in lubricating oils and additives |
|||
* ISO 3988 Determination of Spontaneous ignition temperature [Rejected draft] |
|||
* ISO 3989 Measurement of airborne noise emitted by compressor units including prime movers [Rejected draft] |
|||
* ISO 3990 Dentistry — Evaluation of antibacterial activity of dental restorative materials, luting cements, fissure sealants and orthodontic bonding or luting materials [Under development; originally planned ISO 3990 was Modular co-ordination — Sizes for co-ordinating lengths and widths of openings in the horizontal plane] |
|||
* ISO 3991 Agricultural machinery — Robotic feed systems — Safety [Under development; originally planned ISO 3991 was Modular co-ordination — Sizes for co-ordinating heights of openings in the vertical plane] |
|||
* ISO 3992 Petroleum waxes — Determination of needle penetration [Rejected draft] |
|||
* ISO 3993:1984 Liquefied petroleum gas and light hydrocarbons — Determination of density or relative density — Pressure hydrometer method |
|||
* ISO 3994:2014 Plastics hoses — Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials — Specification |
|||
* ISO 3995:1985 Metallic powders — Determination of green strength by transverse rupture of rectangular compacts |
|||
* ISO 3996:1995 Road vehicles — Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid |
|||
* ISO 3997 Bitumen and bituminous binders – Determination of needle penetration [Rejected draft] |
|||
* ISO 3998:1977 Textiles — Determination of resistance to certain insect pests |
|||
* ISO 3999:2004 Radiation protection — Apparatus for industrial gamma radiography — Specifications for performance, design and tests |
|||
The standards are protected by copyright and most of them must be purchased. However, about 300 of the standards produced by ISO and [[International Electrotechnical Commission|IEC]]'s Joint Technical Committee 1 ([[ISO/IEC JTC 1|JTC 1]]) have been made freely and publicly available.<ref>{{cite web|url=http://standards.iso.org/ittf/PubliclyAvailableStandards/index.html|title=Freely Available Standards|publisher=[[International Organization for Standardization|ISO]]}}</ref> |
|||
== ISO 4000 – ISO 4999 == |
|||
{{Dynamic list}} |
|||
* ISO 4000 Passenger car tyres and rims |
|||
** ISO 4000-1:2021 Part 1: Tyres (metric series) |
|||
== ISO 1 – ISO 199 == |
|||
* [[ISO 1]]:2016 Geometrical product specifications (GPS) — Standard reference temperature for the specification of geometrical and dimensional properties |
|||
* ISO 4001:1977 Shipbuilding — Inland navigation — Raft-type life-saving apparatus |
|||
* ISO GUIDE 1:1972 Presentation of International Standards and technical reports [Withdrawn without replacement] |
|||
* ISO 4002 Equipment for sowing and planting |
|||
* IWA 1:2005 Quality management systems — Guidelines for process improvements in health service organizations [Withdrawn without replacement] |
|||
** ISO 4002-1:1979 Part 1: Concave disks type D1 — Dimensions |
|||
* [[ISO 2]]:1973 Textiles — Designation of the direction of twist in yarns and related products |
|||
** ISO 4002-2:1977 Part 2: Flat disks type D2 with single bevel — Dimensions |
|||
* ISO/IEC GUIDE 2:2004 Standardization and related activities — General vocabulary |
|||
* ISO 4003:1977 Permeable sintered metal materials — Determination of bubble test pore size |
|||
* IWA 2:2007 Quality management systems — Guidelines for the application of ISO 9001:2000 in education [Withdrawn without replacement] |
|||
* ISO 4004:1983 Agricultural tractors and machinery — Track widths |
|||
* [[ISO 3]]:1973 Preferred numbers — Series of preferred numbers |
|||
* ISO/IEC 4005 Telecommunications and information exchange between systems — Low altitude drone area network (LADAN) [Original draft ISO 4005 was deleted] |
|||
* IWA 3:2005 Image safety — Reducing the incidence of undesirable biomedical effects caused by visual image sequences [Withdrawn without replacement] |
|||
* ISO/IEC 4005-1 Part 1: Communication model and requirements [Under development] |
|||
* ISO/IEC GUIDE 3:1981 Identification of national standards that are equivalent to International Standards [Withdrawn: replaced with ISO/IEC GUIDE 21:1999, now ISO/IEC GUIDE 21-1:2005 and ISO/IEC GUIDE 21-2:2005] |
|||
* ISO/IEC 4005-2 Part 2: Physical and data link protocols for shared communication [Under development] |
|||
* [[ISO 4]]:1997 Information and documentation — Rules for the abbreviation of title words and titles of publications |
|||
* ISO/IEC 4005-3 Part 3: Physical and data link protocols for control communication [Under development] |
|||
* ISO GUIDE 4:1975 Preparation of standard methods of measuring performance of consumer goods (SMMP) [Withdrawn: replaced with ISO/IEC GUIDE 36:1982, now Withdrawn without replacement] |
|||
* ISO/IEC 4005-4 Part 4: Physical and data link protocols for video communication [Under development] |
|||
* IWA 4:2009 Quality management systems — Guidelines for the application of ISO 9001:2008 in local government [Withdrawn: replaced with ISO 18091:2014, now ISO 18091:2019] |
|||
* ISO 4006:1991 Measurement of fluid flow in closed conduits – Vocabulary and symbols |
|||
* ISO 5 Photography and graphic technology — Density measurements |
|||
* ISO 4007:2018 Personal protective equipment – Eye and face protection – Vocabulary |
|||
** ISO 5-1:2009 Part 1: Geometry and functional notation |
|||
* ISO 4008 Road vehicles — Fuel injection pump testing |
|||
** ISO |
** ISO 5-2:2009 Part 2: Geometric conditions for transmittance density |
||
** ISO |
** ISO 5-3:2009 Part 3: Spectral conditions |
||
** ISO |
** ISO 5-4:2009 Part 4: Geometric conditions for reflection density |
||
* |
* IWA 5:2006 Emergency preparedness [Withdrawn without replacement] |
||
* ISO GUIDE 5:1976 Designation of internationally standardized items [Withdrawn without replacement] |
|||
* ISO 4010:1998 Diesel engines — Calibrating nozzle, delay pintle type |
|||
* [[ISO 6]]:1993 Photography — Black-and-white pictorial still camera negative film/process systems — Determination of ISO speed |
|||
* ISO/TR 4011:1976 Road vehicles — Apparatus for measurement of the opacity of exhaust gas from diesel engines [Withdrawn: replaced with ISO 11614] |
|||
* IWA 6:2008 Guidelines for the management of drinking water utilities under crisis conditions [Withdrawn without replacement] |
|||
* ISO 4012:1978 Concrete — Determination of compressive strength of test specimens [Withdrawn: replaced with ISO 1920-4] |
|||
* ISO |
* ISO GUIDE 6:1977 Mention of reference materials in International Standards [Withdrawn without replacement] |
||
* [[ISO 7]]:Pipe threads where pressure-tight joints are made on the threads |
|||
* ISO 4014:2011 Hexagon head bolts — Product grades A and B |
|||
** ISO 7-1:1994 Part 1: Dimensions, tolerances and designation |
|||
* ISO 4015:1979 Hexagon head bolts — Product grade B — Reduced shank (shank diameter approximately equal to pitch diameter) |
|||
*** ISO 7-1:1994/COR 1:2007 Technical Corrigendum 1 |
|||
* ISO 4016:2011 Hexagon head bolts — Product grade C |
|||
** ISO 7-2:2000 Part 2: Verification by means of limit gauges |
|||
* ISO 4017:2014 Fasteners — Hexagon head screws — Product grades A and B |
|||
* ISO/IEC GUIDE 7:1994 Guidelines for drafting of standards suitable for use for conformity assessment [Withdrawn: replaced with ISO/IEC 17007:2009] |
|||
* ISO 4018:2011 Hexagon head screws — Product grade C |
|||
* ISO 8:2019 Information and documentation — Presentation and identification of periodicals. For the 8-bit coded character set, see [[ISO/IEC 8859]] |
|||
* ISO 4019:2001 Structural steels — Cold-formed, welded, structural hollow sections — Dimensions and sectional properties [Withdrawn: replaced with ISO 10799-2] |
|||
* ISO GUIDE 8:1977 Guidelines for a national standards information centre [Withdrawn without replacement] |
|||
* ISO 4020:2001 Road vehicles — Fuel filters for diesel engines — Test methods |
|||
* IWA 8:2009 Tableware, giftware, jewellery, luminaries — Glass clarity — Classification and test method [Withdrawn without replacement] |
|||
* ISO 4021:1992 Hydraulic fluid power — Particulate contamination analysis — Extraction of fluid samples from lines of an operating system |
|||
* [[ISO 9]]:1995 Information and documentation — Transliteration of Cyrillic characters into Latin characters — Slavic and non-Slavic languages |
|||
* ISO 4022:2018 Permeable sintered metal materials — Determination of fluid permeability |
|||
* ISO GUIDE 9:1976 Courses in standardization [Withdrawn without replacement] |
|||
* ISO 4023:2009 Rubber hoses and hose assemblies for steam — Test methods |
|||
* IWA 9:2011 Framework for managing sustainable development in business districts [Withdrawn without replacement] |
|||
* ISO 4024:1992 Road vehicles — Ignition coils — Low-tension cable connections |
|||
* ISO/R 10:1955 Aircraft — Ground air-conditioning connections for pressure cabins [Withdrawn: replaced with ISO 1034] |
|||
* ISO 4025 The physical and mechanical properties of bagasse particleboards [Rejected draft] |
|||
* ISO GUIDE 10:1977 Registration of standardizing bodies [Withdrawn without replacement] |
|||
* ISO 4026:2003 Hexagon socket set screws with flat point |
|||
* ISO 11:1987 Aircraft — Ground pressure testing connections for pressure cabins |
|||
* ISO 4027:2003 Hexagon socket set screws with cone point |
|||
* ISO 12:1987 Aerospace — Pipelines — Identification |
|||
* ISO 4028:2003 Hexagon socket set screws with dog point |
|||
* ISO 13:1978 Grey iron pipes, special castings and grey iron parts for pressure main lines [Withdrawn without replacement] |
|||
* ISO 4029:2003 Hexagon socket set screws with cup point |
|||
* ISO 14:1982 Straight-sided splines for cylindrical shafts with internal centering — Dimensions, tolerances and verification |
|||
* ISO 4030:1983 Road vehicles — Vehicle identification number (VIN) — Location and attachment |
|||
* ISO 15:2017 [[Rolling bearing]]s — Radial bearings — Boundary dimensions, general plan |
|||
* [[ISO 4031]]:1978 Information interchange – Representation of local time differentials [Withdrawn: replaced with ISO 8601:1988] |
|||
* [[ISO 16]]:1975 Acoustics — Standard tuning frequency (Standard musical pitch) |
|||
* ISO 4032:2012 Hexagon regular nuts (style 1) — Product grades A and B |
|||
* [[ISO 17]]:1973 Guide to the use of preferred numbers and of series of preferred numbers |
|||
* ISO 4033:2012 Hexagon high nuts (style 2) — Product grades A and B |
|||
* ISO 18:1981 Documentation — Contents list of periodicals |
|||
* ISO 4034:2012 Hexagon regular nuts (style 1) — Product grade C [Withdrawn without replacement] |
|||
* ISO/R 19:1956 Shipbuilding — Inland navigation — Deckbolts [Withdrawn without replacement] |
|||
* ISO 4035:2012 Hexagon thin nuts chamfered (style 0) — Product grades A and B |
|||
* ISO |
* ISO/R 20:1956 Shipbuilding — Inland navigation — Rivets for Hatches [Withdrawn without replacement] |
||
* ISO 21:1985 Shipbuilding — Inland navigation — Cable-lifters for stud-link anchor chains [Withdrawn without replacement] |
|||
* ISO 4037 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy |
|||
* ISO 22:1991 Belt drives — Flat transmission belts and corresponding pulleys — Dimensions and tolerances |
|||
** ISO 4037-1:1996 Part 1: Radiation characteristics and production |
|||
* ISO 23:1993 Cinematography — Camera usage of 35 mm motion-picture film — Specifications |
|||
** ISO 4037-2:1997 Part 2: Dosimetry for radiation protection over the energy ranges from 8 keV to 1,3 MeV and 4 MeV to 9 MeV |
|||
* ISO/R 24:1956 Cinematography — Projector usage of 35 mm motion-picture films for direct front projection — Specifications [Withdrawn: replaced with ISO 2939] |
|||
** ISO 4037-3:1999 Part 3: Calibration of area and personal dosemeters and the measurement of their response as a function of energy and angle of incidence |
|||
* ISO 25:1994 Cinematography — Camera usage of 16 mm motion-picture film — Specifications |
|||
** ISO 4037-4:2004 Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields |
|||
* ISO 26:1993 Cinematography — Projector usage of 16 mm motion-picture films for direct front projection — Specifications |
|||
* ISO 4038:1996 Road vehicles — Hydraulic braking systems — Simple flare pipes, tapped holes, male fittings and hose end fittings |
|||
* ISO/R 27:1956 Cinematography — Emulsion and sound record positions in camera for 16 mm motion-picture films [Withdrawn without replacement] |
|||
* ISO 4039 Road vehicles — Pneumatic braking systems |
|||
* ISO 28:1976 Cinematography — Camera usage of 8 mm Type R motion-picture film — Specifications |
|||
** ISO 4039-1:1998 Part 1: Pipes, male fittings and tapped holes with facial sealing surface |
|||
* ISO 29:1980 Cinematography — Projector usage of 8 mm Type R silent motion-picture film for direct front projection — Specifications [Withdrawn without replacement] |
|||
** ISO 4039-2:1998 Part 2: Pipes, male fittings and holes with conical sealing surface |
|||
* ISO/R 30:1956 Bibliographical strip [Withdrawn without replacement] |
|||
* ISO 4040:2009 Road vehicles — Location of hand controls, indicators and tell-tales in motor vehicles |
|||
* ISO |
* [[ISO 31]]:Quantities and units [Withdrawn: replaced with ISO/IEC 80000] |
||
* ISO 32:1977 Gas cylinders for medical use — Marking for identification of content |
|||
* ISO 4042:2018 Fasteners — Electroplated coating systems |
|||
* ISO/R 33:1957 Rubber, vulcanized or thermoplastic — Du Pont constant load method of measuring abrasion resistance of vulcanized natural and synthetic rubbers [Withdrawn without replacement] |
|||
* ISO 4043:2016 Simultaneous interpreting — Mobile booths — Requirements |
|||
* ISO 34 Rubber, vulcanized or thermoplastic — Determination of tear strength measuring abrasion resistance of vulcanized natural and synthetic rubbers |
|||
* ISO 4044:2017 Leather — Chemical tests — Preparation of chemical test samples |
|||
** ISO 34-1:2015 Part 1: Trouser, angle and crescent test pieces |
|||
* ISO 4045:2018 Leather — Chemical tests — Determination of pH and difference figure |
|||
** ISO 34-2:2015 Part 2: Small (Delft) test pieces |
|||
* ISO 4046 Paper, board, pulps and related terms – Vocabulary |
|||
* ISO 35:2004 Natural rubber latex concentrate — Determination of mechanical stability |
|||
** ISO 4046-1:2016 Part 1: Alphabetical index |
|||
* ISO 36:2020 Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabrics |
|||
** ISO 4046-2:2016 Part 2: Pulping terminology |
|||
* ISO 37:2017 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
|||
** ISO 4046-3:2016 Part 3: Paper-making terminology |
|||
* ISO/R 38:1957 Shipbuilding — Bollards [Withdrawn without replacement] |
|||
** ISO 4046-4:2016 Part 4: Paper and board grades and converted products |
|||
* ISO/R 39:1957 Shipbuilding — Anchor Chains — Lugless Joining Shackles [Withdrawn: replaced with ISO 1704] |
|||
** ISO 4046-5:2016 Part 5: Properties of pulp, paper and board |
|||
* ISO/R 40:1957 Shipbuilding — Anchor Chains — Studless Links [Withdrawn: replaced with ISO 1704] |
|||
* ISO 4047:1977 Leather — Determination of sulphated total ash and sulphated water-insoluble ash |
|||
* ISO 41:1980 Shipbuilding — Inland vessels — Covers for deck openings for pumps [Withdrawn without replacement] |
|||
* ISO 4048:2018 Leather — Chemical tests — Determination of matter soluble in dichloromethane and free fatty acid content |
|||
* ISO/R 42:1957 Shipbuilding — Inland vessels — Mushroom-type ventilator heads [Withdrawn: replaced by ISO 3372, now withdrawn without replacement] |
|||
* ISO 4049:2019 Dentistry — Polymer-based restorative materials |
|||
* ISO 43:2016 Aircraft — Jacking pads |
|||
* ISO 4050:1977 Shipbuilding — Inland vessels — "Rhine" and Hall's stockless anchors |
|||
* ISO 44:1975 Aerospace — Lever-operated, two-position, ON/OFF switches — Directions of operation [Withdrawn without replacement] |
|||
* ISO 4051:1977 Shipbuilding — Inland vessels — Steering gear — Values of torques |
|||
* ISO 45:1990 Aircraft — Pressure refuelling connections |
|||
* ISO 4052:1983 Coffee — Determination of caffeine content (Reference method) [Withdrawn without replacement] |
|||
* ISO 46:1973 Aircraft — Fuel nozzle grounding plugs and sockets |
|||
* ISO 4053 Measurement of gas flow in conduits — Tracer methods |
|||
* ISO/R 47:1957 Aircraft — Toilet connections [Withdrawn: replaced with ISO 17775] |
|||
* ISO 48 Rubber, vulcanized or thermoplastic — Determination of hardness |
|||
** ISO 4053-4:1978 Part 4: Transit time method using radioactive tracers [Withdrawn without replacement] |
|||
** ISO 48-1:2018 Part 1: Introduction and guidance |
|||
* ISO 4054:1980 Couplers, loose spigots and base-plates for use in working scaffolds made of steel tubes — Requirements and test procedure [Withdrawn without replacement] |
|||
** ISO 48-2:2018 Part 2: Hardness between 10 IRHD and 100 IRHD |
|||
* ISO 4055:1977 Road vehicles — Caravans and light trailers — Electromagnetic braking [Withdrawn without replacement] |
|||
** ISO 48-3:2018 Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale |
|||
* ISO 4056:1978 Polyethylene (PE) pipes and fittings — Designation of polyethylene, based on nominal density and melt flow index [Withdrawn: replaced with ISO 10162] |
|||
** ISO 48-4:2018 Part 4: Indentation hardness by durometer method (Shore hardness) |
|||
* ISO 4057:1986 Information processing – Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge, 63 bpmm (1 600 bpi) phase-encoded [Withdrawn without replacement] |
|||
** ISO 48-5:2018 Part 5: Indentation hardness by IRHD pocket meter method |
|||
* ISO 4058:1977 Magnesium and its alloys — Determination of nickel — Photometric method using dimethylglyoxime [Withdrawn without replacement] |
|||
** ISO 48-6:2018 Part 6: Apparent hardness of rubber-covered rollers by IRHD method |
|||
* ISO 4059:1978 Polyethylene (PE) pipes — Pressure drop in mechanical pipe-jointing systems — Method of test and requirements |
|||
** ISO 48-7:2018 Part 7: Apparent hardness of rubber-covered rollers by Shore-type durometer method |
|||
* ISO 4060 Road vehicles — Seat belts — Adjusting devices [Rejected draft] |
|||
** ISO 48-8:2018 Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method |
|||
* ISO 4061 Soldering — Quality requirements for soldering of metallic materials [Under development; original draft ISO 4061 was Road vehicles — Seat belts equipment with push-button buckles — Handling characteristics] |
|||
** ISO 48-9:2018 Part 9: Calibration and verification of hardness testers |
|||
* ISO 4062:1977 Dictation equipment — Symbols [Withdrawn: replaced by ISO 13251] |
|||
* ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1 |
|||
* ISO 4063:2009 Welding and allied processes – Nomenclature of processes and reference numbers |
|||
* ISO 50:1977 Metal pipes — Steel sockets screwed according to ISO 7 [Withdrawn without replacement] |
|||
* ISO 4064 Water meters for cold potable water and hot water |
|||
* ISO/R 51:1957 Shipbuilding — Inland navigation — Pipe lines for the transport of combustible liquids — nominal diameters [Withdrawn without replacement] |
|||
** ISO 4064-1:2014 Part 1: Metrological and technical requirements |
|||
* ISO/R 52:1957 Belt drives — Grooved pulleys — Sections A, B, C, D, and E [Withdrawn: replaced by ISO 4183] |
|||
** ISO 4064-2:2014 Part 2: Test methods |
|||
* ISO 53:1998 Cylindrical gears for general and heavy engineering — Standard basic rack tooth profile |
|||
** ISO 4064-3:2014 Part 3: Test report format |
|||
* ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering — Modules |
|||
** ISO 4064-4:2014 Part 4: Non-metrological requirements not covered in ISO 4064-1 |
|||
* ISO 55:1977 Seedlac — Specification [Withdrawn without replacement] |
|||
** ISO 4064-5:2014 Part 5: Installation requirements |
|||
* ISO 56:1979 Shellac — Specification [Withdrawn without replacement] |
|||
* ISO 4065:2018 Thermoplastics pipes — Universal wall thickness table |
|||
* ISO |
** ISO 56-1:1979 Hand-made Shellac — Specification [Withdrawn without replacement] |
||
** ISO 56-2:1979 Machine-made Shellac — Specification [Withdrawn without replacement] |
|||
* ISO 4067 Technical drawings — Installations |
|||
* ISO 57:1975 Bleached lac — Specification [Withdrawn without replacement] |
|||
* ISO/R 58:1958 Substances of paper [Withdrawn without replacement] |
|||
* ISO 59:1976 Plastics — Determination of acetone-soluble matter [Withdrawn without replacement] |
|||
** ISO 4067-3:1984 Part 3: Graphical symbols for automatic control [Rejected draft later published as ISO/TR 8545] |
|||
* ISO 60:1977 Plastics — Determination of apparent density of material that can be poured from a specified funnel |
|||
** ISO 4067-6:1985 Part 6: Graphical symbols for supply water and drainage systems in the ground [Withdrawn without replacement] |
|||
* ISO 61:1976 Plastics — Determination of apparent density of moulding material that cannot be poured from a specified funnel |
|||
* ISO 4068:1978 Building and civil engineering drawings — Reference lines [Withdrawn without replacement] |
|||
* ISO 62:2008 Plastics — Determination of water absorption |
|||
* ISO 4069:1977 Building and civil engineering drawings — Representation of areas on sections and views — General principles [Withdrawn without replacement] |
|||
* ISO 63:1975 Flat transmission belts — Lengths [Withdrawn: Replaced with ISO 22] |
|||
* ISO 4070 Polyvinylidene fluoride (PVDF) — Effect of time and temperature on expected strength [Under development; originally planned standard with this number was a rejected draft with an unknown name] |
|||
* ISO |
* ISO 64:1974 Steel tubes — Outside Diameters [Withdrawn: Replaced with ISO 4200] |
||
* ISO 65:1981 Carbon steel tubes suitable for screwing in accordance with ISO 7-1 [Withdrawn without replacement] |
|||
* ISO 4072:1982 Green coffee in bags — Sampling |
|||
* ISO/R 66:1958 Paper vocabulary — First series of terms [Withdrawn: Replaced with ISO 4046] |
|||
* ISO 4073:2009 Dentistry — Information system on the location of dental equipment in the working area of the oral health care provider |
|||
* ISO 67:1981 Muscovite mica blocks, thins and films — Grading by size [Withdrawn without replacement] |
|||
* ISO 4074:2015 Natural latex rubber condoms – Requirements and test methods |
|||
* ISO 68 ISO general-purpose screw threads – Basic profile |
|||
* ISO 4075 Polysulfone (PSU) — Effect of time and temperature on expected strength [Under development; originally planned standard with this number was a rejected draft with an unknown name] |
|||
** [[ISO 68-1]]:1998 Part 1: Metric screw threads |
|||
* ISO 4076 Polyphenylsulphone (PPSU) — Effect of time and temperature on expected strength [Under development; originally planned standard with this number was a rejected draft with an unknown name] |
|||
** ISO 68-2:1998 Part 2: Inch screw threads |
|||
* ISO 4077 Coal preparation plant — Guide to sampling in coal preparation plants [Under development; originally planned standard with this number was a rejected draft with an unknown name] |
|||
* ISO 69:1998 Cinematography — 16 mm motion-picture and magnetic film — Cutting and perforating dimensions |
|||
* ISO 4079:2020 Rubber hoses and hose assemblies — Textile-reinforced hydraulic types for oil-based or water-based fluids — Specification |
|||
* ISO 70:1981 Cinematography — 35 mm negative photographic sound record on 35 mm motion-picture film — Position and maximum width dimensions |
|||
* ISO 4080:2009 Rubber and plastics hoses and hose assemblies — Determination of permeability to gas |
|||
* ISO 71:2014 Cinematography — 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film — Positions and dimensions |
|||
* ISO 4081:2016 Rubber hoses and tubing for cooling systems for internal-combustion engines — Specification |
|||
* ISO/R 72:1958 Cinematography — Sound records and scanning area of 35 mm double width push-pull sound prints — Normal and offset centerline types [Withdrawn without replacement] |
|||
* ISO 4082:1981 Road vehicles — Motor vehicles — Flasher units |
|||
* ISO/R 73:1958 Cinematography — Image area produced by camera aperture and maximum projectable image area on 35 mm motion-picture film — Positions and dimensions [Withdrawn: replaced by ISO 2906 and ISO 2907] |
|||
* ISO 4083 Dental operating chair — General requirements [Rejected Draft] |
|||
* ISO 74:1976 Cinematography — Image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-picture film — Positions and dimensions |
|||
* ISO 4084:1977 Aircraft — Repairable contactors (not hermetically sealed) — Performance requirements [Withdrawn without replacement] |
|||
* ISO 75 Plastics — Determination of temperature of deflection under load |
|||
* ISO 4085:1979 Shipbuilding — Inland navigation — Swing derricks [Withdrawn without replacement] |
|||
** ISO 75-1:2020 Part 1: General test method |
|||
* ISO 4086:2001 Road vehicles — 90 semi-trailer fifth wheel kingpin — Interchangeability |
|||
** ISO 75-2:2013 Part 2: Plastics and ebonite |
|||
* ISO 4087:2005 Micrographics – Microfilming of newspapers for archival purposes on 35 mm microfilm |
|||
** ISO 75-3:2004 Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics |
|||
* ISO/TR 4088:1977 Rubber Thread – Classification [Withdrawn without replacement] |
|||
* ISO 76:2006 Rolling bearings — Static load ratings |
|||
* ISO 4089:1979 Shipbuilding — Inland navigation — Sealing rubber for covers of cargo hatches |
|||
* ISO/R 77:1958 Bibliographical references — Essential elements [Withdrawn without replacement] |
|||
* ISO 4090:2001 Photography — Medical radiographic cassettes/screens/films and hard-copy imaging films — Dimensions and specifications |
|||
* ISO 78 Chemistry — Layouts for standards<ref name=VariesBetweenParts group=Note>The exact wording of this title varies between parts. This is the wording of the most recently published part.</ref> |
|||
* ISO 4091:2003 Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Definitions, tests and requirements |
|||
** ISO 78-2:1999 Part 2: Methods of chemical analysis |
|||
* ISO 4092:1988 Road vehicles — Diagnostic systems for motor vehicles — Vocabulary [Withdrawn without replacement] |
|||
** ISO 78-3:1983 Part 3: Standard for molecular absorption spectrometry [Withdrawn without replacement] |
|||
* ISO 4093:1999 Diesel engines — Fuel injection pumps — High-pressure pipes for testing |
|||
** ISO 78-4:1983 Part 4: Standard for atomic absorption spectrometric analysis [Withdrawn without replacement] |
|||
* ISO 4094:2017 Paper, board and pulps — General requirements for the competence of laboratories authorized for the issue of optical reference transfer standards of level 3 |
|||
* ISO/R 79:1968 Steel — Brinell hardness test [Withdrawn: replaced with ISO 6506-1 and ISO 6506-4] |
|||
* ISO 4095:1998 Aerospace — Bihexagonal drives — Wrenching configuration — Metric series |
|||
* ISO/TR 79:2015 Reference materials – Examples of reference materials for qualitative properties |
|||
* ISO 4096:1978 Essential oils (containing tertiary alcohols) — Evaluation of free alcohols content by determination of ester value after cold formylation [Withdrawn without replacement] |
|||
* ISO/R 80:1968 Steel — Rockwell hardness test (B and C scales) [Withdrawn: replaced with ISO 6508] |
|||
* ISO 4097:2020 Rubber, ethylene-propylene-diene (EPDM) — Evaluation procedure |
|||
* ISO/R 81:1967 Steel — Vickers hardness test (Load 5 to 100 kgf) [Withdrawn: replaced with ISO 6507-1 and ISO 6507-4] |
|||
* ISO 4098:2018 Leather — Chemical tests — Determination of water-soluble matter, water-soluble inorganic matter and water-soluble organic matter |
|||
* ISO |
* ISO 82:1974 Steel — Tensile testing [Withdrawn: replaced with ISO 6892-1] |
||
* ISO 83:1976 Steel — Charpy impact test (U-notch) [Withdrawn: replaced with ISO 148-1] |
|||
* ISO 4100:1980 Road vehicles — World parts manufacturer identifier (WPMI) code |
|||
* ISO/R 84:1959 Steel — Izod impact test [Withdrawn without replacement] |
|||
* ISO 4101:1983 Drawn steel wire for elevator ropes — Specifications |
|||
* ISO/R 85:1959 Steel — Bend test [Withdrawn: replaced with ISO 7438] |
|||
* ISO 4102:1984 Equipment for crop protection — Sprayers — Connection threading |
|||
* ISO 86:1974 Steel — Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick [Withdrawn: replaced with ISO 6892-1] |
|||
* ISO 4103:1979 Concrete — Classification of consistency [Withdrawn without replacement] |
|||
* ISO |
* ISO/R 87:1959 Steel — Simple bend testing of sheet and strip less than 3 mm thick [Withdrawn: replaced with ISO 7438] |
||
* ISO/R 88:1959 Steel — Reverse bend testing of sheet and strip less than 3 mm thick [Withdrawn: replaced with ISO 7799] |
|||
* ISO 4105:1978 Textile machinery and accessories — Wires for flexible card clothings |
|||
* ISO 89:1974 Steel — Tensile testing of wire [Withdrawn: replaced with ISO 6892-1] |
|||
* ISO 4106:2012 Motorcycles — Engine test code — Net power |
|||
* ISO |
* ISO 90 Light gauge metal containers — Definitions and determination of dimensions and capacities |
||
** ISO 90-1:1997 Part 1: Open-top cans |
|||
* ISO 4108:1980 Concrete — Determination of tensile splitting strength of test specimens [Withdrawn: replaced with ISO 1920-4] |
|||
** ISO 90-2:1997 Part 2: General use containers |
|||
* ISO 4109:1980 Fresh concrete — Determination of the consistency — Slump test [Withdrawn: replaced with ISO 1920-2] |
|||
** ISO 90-3:2000 Part 3: Aerosol cans |
|||
* ISO 4110:1979 Fresh concrete — Determination of the consistency — Vebe test [Withdrawn: replaced with ISO 1920-2] |
|||
* ISO 91:2017 Petroleum and related products — Temperature and pressure volume correction factors (petroleum measurement tables) and standard reference conditions |
|||
* ISO 4111:1979 Fresh concrete — Determination of consistency — Degree of compactibility (Compaction index) [Withdrawn: replaced with ISO 1920-2] |
|||
* ISO |
* ISO 92:1976 Textile machinery and accessories — Spinning machinery — Definition of side (left or right) |
||
* ISO 93 Textile machinery and accessories — Cylindrical sliver cans |
|||
* ISO 4113:2010 Road vehicles — Calibration fluids for diesel injection equipment |
|||
** ISO 93-1:2006 Part 1: Main dimensions |
|||
* ISO/TR 4114:1979 Road vehicles — Caravans and light trailers — Static load on ball couplings [Withdrawn without replacement] |
|||
** ISO 93-2:2006 Part 2: Spring bottoms |
|||
* ISO 4115:1997 Air cargo equipment — Air/land pallet nets |
|||
** ISO 93-3:1981 Part 3: Packaging sliver cans (press cans) [Withdrawn without replacement] |
|||
* ISO 4116:1986 Air cargo equipment — Ground equipment requirements for compatibility with aircraft unit load devices |
|||
* ISO 94:1982 Textile machinery and accessories — Spindle gauges for ring-spinning and ring-doubling frames |
|||
* ISO 4117:1993 Air and air/land cargo pallets — Specification and testing |
|||
* ISO/R 95:1972 Textile machinery and accessories — Rings for ring-spinning and ring-doubling frames for "C" travellers [Withdrawn without replacement] |
|||
* ISO 4118:2016 Air cargo — Non-certified lower deck containers — Design and testing |
|||
* ISO 96 Textile machinery and accessories — Rings and travellers for ring spinning and ring twisting frames |
|||
* ISO 4119:1995 Pulps — Determination of stock concentration |
|||
** ISO 96-1:2016 Part 1: Flange rings T and SF and their travellers |
|||
* ISO 4120:2021 Sensory analysis — Methodology — Triangle test |
|||
** ISO 96-2:2009 Part 2: HZ- and J-rings and their travellers |
|||
* ISO 4121:2003 Sensory analysis — Guidelines for the use of quantitative response scales |
|||
* ISO 97:1975 Textile machinery and accessories — Rings for spinning, doubling and twisting for ear-shaped travellers [Withdrawn: replaced with ISO 96-2] |
|||
* ISO/TR 4122:1977 Equipment for working the soil — Dimensions of flat disks — Type A [Withdrawn without replacement] |
|||
* ISO |
* ISO 98:2001 Textile machinery and accessories — Spinning preparatory and spinning machinery — Main dimensions of coverings for top rollers |
||
* ISO 99:1975 Pulleys for flat transmission belts — Diameters [Withdrawn: replaced with ISO 22] |
|||
* ISO 4124:1994 Liquid hydrocarbons — Dynamic measurement — Statistical control of volumetric metering systems |
|||
* ISO 100:1984 Pulleys for flat transmission belts — Crowns [Withdrawn: replaced with ISO 22] |
|||
* ISO 4125:1991 Dry fruits and dried fruits – Definitions and nomenclature |
|||
* ISO/R 101:1959 Width of sheets of paper [Withdrawn without replacement] |
|||
* ISO 4126 Safety devices for protection against excessive pressure |
|||
* ISO 102:1990 Aircraft — Gravity filling orifices |
|||
** ISO 4126-1:2013 Part 1: Safety valves |
|||
* ISO/R 103:1959 Aircraft — Instrument Cases — Sizes and mounting dimensions [Withdrawn without replacement] |
|||
** ISO 4126-2:2018 Part 2: Bursting disc safety devices |
|||
* ISO 104:2015 Rolling bearings — Thrust bearings — Boundary dimensions, general plan |
|||
** ISO 4126-3:2020 Part 3: Safety valves and bursting disc safety devices in combination |
|||
* ISO 105 Textiles — Tests for [[colour fastness]] |
|||
** ISO 4126-4:2013 Part 4: Pilot operated safety valves |
|||
** ISO |
** ISO 105-A01:2010 Part A01: General principles of testing |
||
** ISO |
** ISO 105-A02:1993 Part A02: Grey scale for assessing change in colour |
||
** ISO |
** ISO 105-A03:2019 Part A03: Grey scale for assessing staining |
||
** ISO 105-A04:1989 Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics |
|||
** ISO 4126-9:2008 Part 9: Application and installation of safety devices excluding stand-alone bursting disc safety devices |
|||
** ISO |
** ISO 105-A05:1996 Part A05: Instrumental assessment of change in colour for determination of grey scale rating |
||
** ISO 105-A06:1995 Part A06: Instrumental determination of 1/1 standard depth of colour |
|||
* ISO 4127 Shipbuilding — Inland navigation — Fairleads |
|||
** ISO |
** ISO 105-A08:2001 Part A08: Vocabulary used in colour measurement |
||
** ISO 105-A11:2012 Part A11: Determination of colour fastness grades by digital imaging techniques |
|||
** ISO 4127-2:1979 Part 2: Two-Roller fairleads |
|||
** ISO 105-B01:2014 Part B01: Colour fastness to light: Daylight |
|||
* ISO 4128:1985 Aircraft — Air mode modular containers |
|||
** ISO 105-B02:2014 Part B02: Colour fastness to artificial light: Xenon arc fading lamp test |
|||
* ISO 4129:2012 Road vehicles – Mopeds – Symbols for controls, indicators and tell-tales [Withdrawn without replacement] |
|||
** ISO 105-B03:2017 Part B03: Colour fastness to weathering: Outdoor exposure |
|||
* ISO 4130:1978 Road vehicles – Three-dimensional reference system and fiducial marks – Definitions |
|||
** ISO 105-B04:1994 Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test |
|||
* ISO 4131:1979 Road vehicles — Dimensional codes for passenger cars |
|||
** ISO 105-B05:1993 Part B05: Detection and assessment of photochromism |
|||
* ISO 4132:1979 Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure — Laying lengths and size of threads — Metric series |
|||
** ISO 105-B06:2020 Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test |
|||
* ISO 4133:1979 Meat and meat products — Determination of glucono-delta-lactone content (Reference method) [Withdrawn without replacement] |
|||
** ISO 105-B07:2009 Part B07: Colour fastness to light of textiles wetted with artificial perspiration |
|||
* ISO 4134:2021 Meat and meat products — Determination of L-(+)-glutamic acid content — Reference method |
|||
** ISO 105-B08:1995 Part B08: Quality control of blue wool reference materials 1 to 7 |
|||
* ISO 4135:2022 Anaesthetic and respiratory equipment – Vocabulary |
|||
** ISO 105-B10:2011 Part B10: Artificial weathering — Exposure to filtered xenon-arc radiation |
|||
* ISO 4136:2012 Destructive tests on welds in metallic materials — Transverse tensile test |
|||
** ISO 105-C01:1989 Part C01: Colour fastness to washing: Test 1 [Withdrawn: replaced with ISO 105-C10] |
|||
* ISO/TR 4137:1978 Plastics — Determination of modulus of elasticity by alternating flexure [Withdrawn without replacement] |
|||
** ISO 105-C02:1989 Part C02: Colour fastness to washing: Test 2 [Withdrawn: replaced with ISO 105-C10] |
|||
* ISO 4138:2021 Passenger cars — Steady-state circular driving behaviour — Open-loop test methods |
|||
** ISO 105-C03:1989 Part C03: Colour fastness to washing: Test 3 [Withdrawn: replaced with ISO 105-C10] |
|||
* ISO 4139:1979 Ferrosilicon – Determination of aluminium content – Flame atomic absorption spectrometric method |
|||
** ISO 105-C04:1989 Part C04: Colour fastness to washing: Test 4 [Withdrawn: replaced with ISO 105-C10] |
|||
* ISO 4140:1979 Ferrochromium and ferrosilicochromium – Determination of chromium content – Potentiometric method |
|||
** ISO 105-C05:1989 Part C05: Colour fastness to washing: Test 5 [Withdrawn: replaced with ISO 105-C10] |
|||
* ISO 4141 Road vehicles — Multi-core connecting cables |
|||
** ISO |
** ISO 105-C06:2010 Part C06: Colour fastness to domestic and commercial laundering |
||
** ISO |
** ISO 105-C07:1999 Part C07: Colour fastness to wet scrubbing of pigment printed textiles |
||
** ISO 105-C08:2010 Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator |
|||
** ISO 4141-3:2019 Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables |
|||
** ISO 105-C09:2001 Part C09: Colour fastness to domestic and commercial laundering — Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator |
|||
** ISO 4141-4:2009 Part 4: Test methods and requirements for coiled cable assemblies |
|||
** ISO 105-C10:2006 Part C10: Colour fastness to washing with soap or soap and soda |
|||
* ISO 4142:2002 Laboratory glassware — Test tubes |
|||
** ISO 105-C12:2004 Part C12: Colour fastness to industrial laundering |
|||
* ISO 4143:1981 Shipbuilding — Inland vessels — Open rowing lifeboats |
|||
** ISO 105-D01:2010 Part D01: Colour fastness to drycleaning using perchloroethylene solvent |
|||
* ISO 4144:2003 Pipework — Stainless steel fittings threaded in accordance with ISO 7-1 |
|||
** ISO 105-D02:2016 Part D02: Colour fastness to rubbing: Organic solvents |
|||
* ISO 4145:1986 Non-alloy steel fittings threaded to ISO 7-1 |
|||
** ISO 105-E01:2013 Part E01: Colour fastness to water |
|||
* ISO 4146:1980 Shipbuilding — Inland vessels — Manholes [Withdrawn: replaced by ISO 5894] |
|||
** ISO 105-E02:2013 Part E02: Colour fastness to sea water |
|||
* ISO 4147:1997 Aerospace — Nuts, hexagonal, slotted (castellated), normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 degrees C, 600 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/425 degrees C, 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C, 1 100 MPa (at ambient temperature)/650 degrees C, 1 210 MPa (at ambient temperature)/730 degrees C, 1 250 MPa (at ambient temperature)/235 degrees C and 1 550 MPa (at ambient temperature)/600 degrees C — Dimensions |
|||
** ISO 105-E03:2010 Part E03: Colour fastness to chlorinated water (swimming-pool water) |
|||
* ISO 4148:2004 Road vehicles — Special warning lamps — Dimensions |
|||
** ISO 105-E04:2013 Part E04: Colour fastness to perspiration |
|||
* ISO 4149:2005 Green coffee — Olfactory and visual examination and determination of foreign matter and defects |
|||
** ISO 105-E05:2010 Part E05: Colour fastness to spotting: Acid |
|||
* ISO 4150:2011 Green coffee or raw coffee — Size analysis — Manual and machine sieving |
|||
** ISO 105-E06:2006 Part E06: Colour fastness to spotting: Alkali |
|||
* ISO 4151:1987 Road vehicles — Mopeds — Type, location and functions of controls [Withdrawn without replacement] |
|||
** ISO 105-E07:2010 Part E07: Colour fastness to spotting: Water |
|||
* ISO 4152 Glass‐reinforced thermosetting plastics (GRP) pipes — Determination of the apparent axial long‐term modulus of pipes subject to beam bending [Originally planned ISO 4152 was Welder's test on non-alloy and low-alloy steels for manual metal arc welding] |
|||
** ISO 105-E08:1994 Part E08: Colour fastness to hot water |
|||
* ISO 4153:1981 Aircraft — Pressure fuel dispensing system — Test procedure and limit value for shut-off surge pressure |
|||
** ISO 105-E09:2010 Part E09: Colour fastness to potting |
|||
* ISO 4154 Traditional Chinese medicine — Sinomenium acutum stem [Under development] |
|||
** ISO 105-E10:1994 Part E10: Colour fastness to decatizing |
|||
* ISO 4155 Magnesium and magnesium alloys — Determination of nickel — Inductively coupled plasma optical emission spectrometric method [Under development] |
|||
** ISO 105-E11:1994 Part E11: Colour fastness to steaming |
|||
* ISO 4156 Straight cylindrical involute splines — Metric module, side fit |
|||
** ISO |
** ISO 105-E12:2010 Part E12: Colour fastness to milling: Alkaline milling |
||
** ISO |
** ISO 105-E13:1994 Part E13: Colour fastness to acid-felting: Severe |
||
** ISO |
** ISO 105-E14:1994 Part E14: Colour fastness to acid-felting: Mild |
||
** ISO 105-E16:2006 Part E16: Colour fastness to water spotting on upholstery fabrics |
|||
* [[ISO 4157]] Construction drawings – Designation systems |
|||
** ISO 105-F01:2001 Part F01: Specification for wool adjacent fabric |
|||
* ISO 4158:1978 Ferrosilicon, ferrosilicomanganese and ferrosilicochromium – Determination of silicon content – Gravimetric method |
|||
** ISO 105-F02:2009 Part F02: Specification for cotton and viscose adjacent fabrics |
|||
* ISO 4159:1978 Ferromanganese and ferrosilicomanganese – Determination of manganese content – Potentiometric method |
|||
** ISO 105-F03:2001 Part F03: Specification for polyamide adjacent fabric |
|||
* ISO 4160 Hexagon nuts and bolts with flange, style 1 — Small Series — Product grade B [Draft merged into ISO 4161 and ISO 4162] |
|||
** ISO 105-F04:2001 Part F04: Specification for polyester adjacent fabric |
|||
* ISO 4161:2012 Hexagon nuts with flange, style 2 — Coarse thread |
|||
** ISO 105-F05:2001 Part F05: Specification for acrylic adjacent fabric |
|||
* ISO 4162:2012 Hexagon bolts with flange — Small series — Product grade A with driving feature of product grade B |
|||
** ISO 105-F06:2000 Part F06: Specification for silk adjacent fabric |
|||
* ISO 4164:2012 Mopeds — Engine test code — Net power |
|||
** ISO 105-F07:2001 Part F07: Specification for secondary acetate adjacent fabric |
|||
* [[ISO 4165]] Road vehicles — Electrical connections — Double-pole connection |
|||
** ISO 105-F09:2009 Part F09: Specification for cotton rubbing cloth |
|||
* ISO 4166:1979 Hexagon nuts for fine mechanics — Product grade F [Withdrawn without replacement] |
|||
** ISO 105-F10:1989 Part F10: Specification for adjacent fabric: Multifibre |
|||
* ISO 4167:2012 Polyolefin agricultural twines |
|||
** ISO 105-G01:2016 Part G01: Colour fastness to nitrogen oxides |
|||
* ISO 4168:2002 Timekeeping instruments — Conditions for carrying out checks on radioluminescent deposits [Withdrawn without replacement] |
|||
** ISO 105-G02:1993 Part G02: Colour fastness to burnt-gas fumes |
|||
* ISO 4169:1979 Office machines — Keyboards — Key numbering system and layout charts |
|||
** ISO 105-G03:1993 Part G03: Colour fastness to ozone in the atmosphere |
|||
* ISO 4170:1995 Air cargo equipment — Interline pallet nets |
|||
** ISO 105-G04:2016 Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humidities |
|||
* ISO 4171:1993 Air cargo equipment — Interline pallets |
|||
** ISO 105-J01:1997 Part J01: General principles for measurement of surface colour |
|||
* ISO 4172:1991 Technical drawings – Construction drawings – Drawings for the assembly of prefabricated structures |
|||
** ISO 105-J02:1997 Part J02: Instrumental assessment of relative whiteness |
|||
* ISO 4173:1980 Ferromolybdenum – Determination of molybdenum content – Gravimetric method |
|||
** ISO 105-J03:2009 Part J03: Calculation of colour differences |
|||
* ISO 4174:1998 Cereals, oilseeds and pulses — Measurement of unit pressure loss in one-dimensional air flow through bulk grain |
|||
** ISO 105-J05:2007 Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02) |
|||
* ISO 4175:1979 Shipbuilding — Shipborne barges, series 1 — Main dimensions |
|||
** ISO 105-N01:1993 Part N01: Colour fastness to bleaching: Hypochlorite |
|||
* ISO 4176:1981 Fertilizers — Determination of nitrate nitrogen content — Nitron gravimetric method [Withdrawn without replacement] |
|||
** ISO 105-N02:1993 Part N02: Colour fastness to bleaching: Peroxide |
|||
* ISO 4177 Magnesium and magnesium alloys – Determination of chromium – Inductively coupled plasma optical emission spectrometric method [Under development; original draft with this number unknown] |
|||
** ISO 105-N03:1993 Part N03: Colour fastness to bleaching: Sodium chlorite (mild) |
|||
* ISO 4178:1980 Complete, filled transport packages — Distribution trials — Information to be recorded |
|||
** ISO 105-N04:1993 Part N04: Colour fastness to bleaching: Sodium chlorite (severe) |
|||
* [[ISO 4179]] Ductile iron pipes and fittings for pressure and non-pressure pipelines – Cement mortar lining |
|||
** ISO 105-N05:1993 Part N05: Colour fastness to stoving |
|||
* ISO 4180:2019 Packaging — Complete, filled transport packages — General rules for the compilation of performance test schedules |
|||
** ISO 105-P01:1993 Part P01: Colour fastness to dry heat (excluding pressing) |
|||
* ISO 4181 Magnesium and magnesium alloys — Determination of strontium — Inductively coupled plasma optical emission spectrometric method [Under development; original draft with this number unknown] |
|||
** ISO 105-P02:2002 Part P02: Colour fastness to pleating: Steam pleating |
|||
* ISO 4182:1999 Motor vehicles — Measurement of variations in dipped-beam headlamp angle as a function of load [Withdrawn without replacement] |
|||
** ISO 105-S01:1993 Part S01: Colour fastness to vulcanization: Hot air |
|||
* ISO 4183:1995 Belt drives — Classical and narrow V-belts — Grooved pulleys (system based on datum width) |
|||
** ISO 105-S02:1993 Part S02: Colour fastness to vulcanization: Sulfur monochloride |
|||
* ISO 4184:1992 Belt drives — Classical and narrow V-belts — Lengths in datum system |
|||
** ISO 105-S03:1993 Part S03: Colour fastness to vulcanization: Open steam |
|||
* ISO 4185:1980 Measurement of liquid flow in closed conduits – Weighing method |
|||
** ISO 105-X01:1993 Part X01: Colour fastness to carbonizing: Aluminium chloride |
|||
* ISO 4186:1980 Asparagus — Guide to storage |
|||
** ISO 105-X02:1993 Part X02: Colour fastness to carbonizing: Sulfuric acid |
|||
* ISO 4187:1980 Horse-radish — Guide to storage |
|||
** ISO 105-X03:1987 Part X03: Colour fastness to chlorination [Withdrawn without replacement] |
|||
* ISO 4188 Magnesium and magnesium alloys – Determination of arsenic – Inductively coupled plasma optical emission spectrometric method [Under development; original draft with this number unknown] |
|||
** ISO 105-X04:1994 Part X04: Colour fastness to mercerizing |
|||
* ISO 4189 Magnesium and magnesium alloys — Determination of sodium — Inductively coupled plasma optical emission spectrometric method [Under development; original draft with this number unknown] |
|||
** ISO 105-X05:1994 Part X05: Colour fastness to organic solvents |
|||
* ISO 4190 Lift (US: Elevator) installation |
|||
** ISO 105-X06:1994 Part X06: Colour fastness to soda boiling |
|||
** ISO 4190-1:2010 Part 1: Class I, II, III and VI lifts [Withdrawn: replaced with ISO 8100-30] |
|||
** ISO |
** ISO 105-X07:1994 Part X07: Colour fastness to cross-dyeing: Wool |
||
** ISO |
** ISO 105-X08:1994 Part X08: Colour fastness to degumming |
||
** ISO |
** ISO 105-X09:1993 Part X09: Colour fastness to formaldehyde |
||
** ISO 105-X10:1993 Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings |
|||
** ISO 4190-6:1984 Part 6: Passenger lifts to be installed in residential buildings — Planning and selection [Withdrawn: replaced with ISO 8100-32] |
|||
** ISO 105-X11:1994 Part X11: Colour fastness to hot pressing |
|||
* ISO/TR 4191:2014 Plastics piping systems for water supply — Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) — Guidance for installation |
|||
** ISO 105-X12:2016 Part X12: Colour fastness to rubbing |
|||
* ISO 4192:1981 Aluminium and aluminium alloys — Determination of lead content — Flame atomic absorption spectrometric method |
|||
** ISO 105-X13:1994 Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting |
|||
* ISO 4193:1981 Aluminium and aluminium alloys — Determination of chromium content — Flame atomic absorption spectrometric method |
|||
** ISO 105-X14:1994 Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate |
|||
* ISO 4194:1981 Magnesium alloys — Determination of zinc content — Flame atomic absorption spectrometric method |
|||
** ISO 105-X16:2016 Part X16: Colour fastness to rubbing — Small areas |
|||
* ISO 4195:2012 Conveyor belts with heat-resistant rubber covers — Heat resistance of covers — Requirements and test methods |
|||
** ISO 105-X18:2007 Part X18: Assessment of the potential to phenolic yellowing of materials |
|||
* ISO 4196:1984 Graphical symbols — Use of arrows [Withdrawn: replaced with ISO 80416-2] |
|||
** ISO 105-X19:2020 Part X19: Colour fastness to rubbing (Gakushin test method) |
|||
* ISO 4197:1989 Equipment for working the soil — Hoe blades — Fixing dimensions |
|||
** ISO 105-Z01:1993 Part Z01: Colour fastness to metals in the dye-bath: Chromium salts |
|||
* ISO 4198:1984 Surface active agents — Detergents for hand dishwashing — Guide for comparative testing of performance |
|||
** ISO 105-Z02:1993 Part Z02: Colour fastness to metals in the dye-bath: Iron and copper |
|||
* ISO 4199:1979 Plain bearings — Shaft diameters for unsplit bushes [Withdrawn without replacement] |
|||
** ISO 105-Z03:1996 Part Z03: Intercompatibility of basic dyes for acrylic fibres |
|||
* ISO 4200:1991 Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length |
|||
** ISO 105-Z04:1995 Part Z04: Dispersibility of disperse dyes |
|||
* ISO 4202:2016 Reduction sleeves with external 7/24 taper for tools with Morse taper shanks |
|||
** ISO 105-Z05:1996 Part Z05: Determination of the dusting behaviour of dyes |
|||
* ISO 4203:1978 Parallel shank tools — Driving tenons and sockets — Dimensions [Withdrawn without replacement] |
|||
** ISO 105-Z06:1998 Part Z06: Evaluation of dye and pigment migration |
|||
* ISO 4204:2016 Countersinks, 90°, with Morse taper shanks and detachable pilots |
|||
** ISO 105-Z07:1995 Part Z07: Determination of application solubility and solution stability of water-soluble dyes |
|||
* ISO 4205:2016 Countersinks, 90°, with parallel shanks and solid pilots |
|||
** ISO 105-Z08:1995 Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes |
|||
* ISO 4206:2016 Counterbores with parallel shanks and solid pilots |
|||
** ISO 105-Z09:1995 Part Z09: Determination of cold water solubility of water-soluble dyes |
|||
* ISO 4207:2016 Counterbores with Morse taper shanks and detachable pilots |
|||
** ISO 105-Z10:1997 Part Z10: Determination of relative colour strength of dyes in solution |
|||
* ISO 4208:1977 Detachable pilots for use with counterbores and 90 degrees countersinks — Dimensions |
|||
** ISO 105-Z11:1998 Part Z11: Evaluation of speckiness of colorant dispersions |
|||
* ISO 4209 Truck and bus tyres and rims (metric series) |
|||
* ISO/R 106:1959 Shipbuilding — Light metal rivets — Diameters and clearances [Withdrawn without replacement] |
|||
** ISO 4209-1:2001 Part 1: Tyres |
|||
* ISO/R 107:1959 Shipbuilding — Light metal rivets — Ship heads [Withdrawn without replacement] |
|||
** ISO 4209-2:2020 Part 2: Rims |
|||
* ISO 108:1976 Textile machinery and accessories — Weaving looms — Definition of left and right sides |
|||
* ISO 4210 Cycles — Safety requirements for bicycles |
|||
* ISO 109:1982 Textile machinery — Working widths of weaving machines |
|||
** ISO 4210-1:2014 Part 1: Terms and definitions |
|||
* ISO 110:1978 Textile machinery and accessories — Cones for yarn winding (cross wound) — Half angle of the cone 9 degrees 15' [Withdrawn without replacement] |
|||
** ISO 4210-2:2015 Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles |
|||
* ISO 111:1978 Textile machinery and accessories — Cones for yarn winding (cross wound) — Half angle of the cone 4 degrees 20' [Withdrawn: Replaced with ISO 8489-3] |
|||
** ISO 4210-3:2014 Part 3: Common test methods |
|||
* ISO 112:1983 Textile machinery and accessories — Cones for yarn winding (cross wound) — Half angle of the cone 3 degrees 30' [Withdrawn: Replaced with ISO 8489-2] |
|||
** ISO 4210-4:2014 Part 4: Braking test methods |
|||
* ISO 113:2010 Rolling bearings — Plummer block housings — Boundary dimensions |
|||
** ISO 4210-5:2014 Part 5: Steering test methods |
|||
* ISO 114:1980 Unalloyed magnesium ingots — Chemical composition [Withdrawn: replaced with ISO 8287] |
|||
** ISO 4210-6:2015 Part 6: Frame and fork test methods |
|||
* ISO 115:2003 Unalloyed aluminium ingots for remelting — Classification and composition |
|||
** ISO 4210-7:2014 Part 7: Wheels and rims test methods |
|||
* ISO/R 116:1959 Pesticides — Common names — First series of terms [Withdrawn: replaced with ISO 1750] |
|||
** ISO 4210-8:2014 Part 8: Pedal and drive system test methods |
|||
* ISO/R 117:1959 Plastics — Polystyrene — Determination of boiling water absorption [Withdrawn: replaced with ISO 62] |
|||
** ISO 4210-9:2014 Part 9: Saddles and seat-post test methods |
|||
* ISO 118:1976 Plastics — Polystyrene — Determination of methanol-soluble matter [Withdrawn without replacement] |
|||
* ISO 4211:1979 Furniture — Assessment of surface resistance to cold liquids |
|||
* ISO 119:1977 Plastics — Phenol-formaldehyde mouldings — Determination of free phenols — Iodometric method |
|||
** ISO 4211-2:2013 Part 2: Assessment of resistance to wet heat |
|||
* ISO 120:1977 Plastics — Phenol-formaldehyde mouldings — Determination of free ammonia and ammonium compounds — Colorimetric comparison method |
|||
** ISO 4211-3:2013 Part 3: Assessment of resistance to dry heat |
|||
* ISO 121:1980 Magnesium-aluminium-zinc alloy ingots and alloy castings — Chemical composition and mechanical properties of sand cast reference test bars [Withdrawn: replaced with ISO 16220] |
|||
** ISO 4211-4:1988 Part 4: Assessment of resistance to impact |
|||
* ISO/R 122:1959 Composition of magnesium-aluminium-zinc alloy ingots for casting purposes [Withdrawn: replaced with ISO 121, and later ISO 16220] |
|||
** ISO 4211-5:2021 Part 5: Assessment of resistance to abrasion |
|||
* ISO 123:2001 Rubber latex — Sampling |
|||
* ISO 4212 Corrosion of Metals and Alloys — Method of oxalic acid etching test for intergranular corrosion of austenitic stainless steel [Under development; original draft with this number unknown] |
|||
* ISO 124:2014 Latex, rubber — Determination of total solids content |
|||
* ISO 4213.2 Information technology — Artificial Intelligence — Assessment of machine learning classification performance [Under development; original draft with this number unknown] |
|||
* ISO 125:2020 Natural rubber latex concentrate — Determination of alkalinity |
|||
* ISO 4214 Milk and milk products — Determination of amino acids in infant formula and other dairy products [Under development; original draft with this number unknown] |
|||
* ISO 126:2005 Natural rubber latex concentrate — Determination of dry rubber content |
|||
* ISO 4215 Corrosion of metals and alloys — Test method for high-temperature corrosion testing of metallic materials by thermogravimetry under isothermal or cyclic conditions [Under development; original draft with this number unknown] |
|||
* ISO |
* ISO 127:2018 Rubber, natural latex concentrate — Determination of KOH number |
||
* [[ISO 128]] Technical product documentation — General principles of representation<ref name=VariesBetweenParts group=Note /> |
|||
* [[ISO 4217]]:2015 Codes for the representation of currencies |
|||
* ISO 129 Technical product documentation — Indication of dimensions and tolerances<ref name=VariesBetweenParts group=Note /> |
|||
* ISO 4218 Printing machines — Vocabulary |
|||
** ISO |
** ISO 129-1:2018 Part 1: General principles |
||
** ISO 129-4:2013 Part 4: Dimensioning of shipbuilding drawings |
|||
* ISO 4219:1979 Air quality — Determination of gaseous sulphur compounds in ambient air — Sampling equipment |
|||
** ISO 129-5:2018 Part 5: Dimensioning of structural metal work |
|||
* ISO 4220:1983 Ambient air — Determination of a gaseous acid air pollution index — Titrimetric method with indicator or potentiometric end-point detection |
|||
* ISO/R 130:1959 Aircraft — Colour identification of mechanical control circuits [Withdrawn without replacement] |
|||
* ISO 4221:1980 Air quality — Determination of mass concentration of sulphur dioxide in ambient air — Thorin spectrophotometric method |
|||
* ISO 131:1979 Acoustics — Expression of physical and subjective magnitudes of sound or noise in air [Withdrawn without replacement] |
|||
* ISO 4222 Ambient air — Measurement of particulate fall-out — Horizontal deposit gauge method [Rejected draft] |
|||
* ISO 132:2017 Rubber, vulcanized or thermoplastic — Determination of flex cracking and crack growth (De Mattia) |
|||
* ISO 4223 Definitions of some terms used in the tyre industry |
|||
* ISO 133:1983 Rubber, vulcanized — Determination of crack growth (De Mattia) [Withdrawn: replaced with ISO 132] |
|||
** ISO 4223-1:2017 Part 1: Pneumatic tyres |
|||
* ISO 134:1973 Plain end steel tubes for general purposes [Withdrawn: replaced with ISO 4200] |
|||
** ISO 4223-2:1991 Part 2: Solid tyres |
|||
* ISO/R 135:1959 Paper vocabulary — Second series of terms [Withdrawn: replaced with ISO 4046] |
|||
* ISO 4224:2000 Ambient air — Determination of carbon monoxide — Non-dispersive infrared spectrometric method |
|||
* ISO 136:1972 Steel — Simple torsion testing of wire [Withdrawn: replaced with ISO 7800] |
|||
* ISO 4225:2020 Air quality – General aspects – Vocabulary |
|||
* ISO 137:2015 Wool — Determination of fibre diameter — Projection microscope method |
|||
* ISO 4226:2007 Air quality – General aspects – Units of measurement |
|||
* ISO/R 138:1960 Textiles — Universal yarn count system [Withdrawn: replaced with ISO 1144] |
|||
* ISO/TR 4227:1989 Planning of ambient air quality monitoring |
|||
* ISO |
* ISO 139:2005 Textiles — Standard atmospheres for conditioning and testing |
||
* ISO 140 Acoustics — Measurement of sound insulation in buildings and of building elements |
|||
* ISO 4229:2017 Assembly tools for screws and nuts — Single-head engineer's wrenches for lower torque applications — Maximum outside dimensions of heads and test torques |
|||
** ISO 140-1:1997 Part 1: Requirements for laboratory test facilities with suppressed flanking transmission [Withdrawn: replaced with ISO 10140-(1–5)] |
|||
* ISO 4230:2016 Hand- and machine-operated circular screwing dies for taper pipe threads — R series |
|||
** ISO 140-2:1991 Part 2: Determination, verification and application of precision data [Withdrawn: replaced with ISO 12999-1:2014] |
|||
* ISO 4231:2016 Hand- and machine-operated circular screwing dies for parallel pipe threads — G series |
|||
** ISO 140-3:1995 Part 3: Laboratory measurements of airborne sound insulation of building elements [Withdrawn: replaced with ISO 10140-(1–5)] |
|||
* ISO 4232 Office machines – Minimum information to be included in specification sheets |
|||
** ISO |
** ISO 140-4:1998 Part 4: Field measurements of airborne sound insulation between rooms [Withdrawn: replaced with ISO 16283-1:2014] |
||
** ISO 140-5:1998 Part 5: Field measurements of airborne sound insulation of façade elements and façades [Withdrawn: replaced with ISO 16283-(1,3):2014] |
|||
** ISO 4232-2:1980 Part 2: Document copying machines |
|||
** ISO |
** ISO 140-6:1998 Part 6: Laboratory measurements of impact sound insulation of floors [Withdrawn: replaced with ISO 10140-(1–5)] |
||
** ISO 140-7:1998 Part 7: Field measurements of impact sound insulation of floors [Withdrawn: replaced with ISO 16283-(1–2)] |
|||
* ISO 4233 Hot helium leak testing method for high temperature pressure-bearing components in nuclear fusion reactors [Under development; original draft with this number unknown] |
|||
** ISO 140-8:1997 Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor [Withdrawn: replaced with ISO 10140-(1–5)] |
|||
* ISO 4238:1976 Cinematography — Optical printing ratios for enlargement and reduction of motion-picture film images — Specifications |
|||
** ISO 140-9:1985 Part 9: Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it [Withdrawn: replaced with ISO 10848-2] |
|||
* ISO 4240-1 Fine bubble technology — Environmental applications — Part 1: Inspection method using online particle counter in dissolved air flotation (DAF) plant [Under development; original draft with this number unknown, but relates to Cinematography] |
|||
** ISO 140-10:1991 Part 10: Laboratory measurement of airborne sound insulation of small building elements [Withdrawn: replaced with ISO 10140-(1–5)] |
|||
* ISO 4241:2019 Cinematography — Projection film leader (time-based), trailer and cue marks — Specifications |
|||
** ISO 140-11:1991 Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors [Withdrawn: replaced with ISO 10140-(1–5)] |
|||
* ISO 4242:1980 Cinematography — Recording head gaps for two sound records on 16 mm magnetic film — Positions and width dimensions |
|||
** ISO 140-12:2000 Part 12: Laboratory measurement of room-to-room airborne and impact sound insulation of an access floor [Withdrawn: replaced with ISO 10848-2] |
|||
* ISO 4243:1979 Cinematography — Picture image area and photographic sound record on 16 mm motion-picture release prints — Positions and dimensions |
|||
** ISO/TR 140-13:1997 Part 13: Guidelines [Withdrawn: replaced with ISO 140-14] |
|||
* ISO 4244:1979 Cinematography — Photographic sound record on 8 mm Type S motion-picture prints — Position and width dimensions [Withdrawn without replacement] |
|||
** ISO 140-14:2004 Part 14: Guidelines for special situations in the field [Withdrawn: replaced with ISO 16283-1:2014] |
|||
* ISO 4245 Cinematography — Projector usage of 16 mm motion-picture films for direct front projection — Specifications [Draft numbered as ISO 26, which the draft was a revision of] |
|||
** ISO 140-16:2006 Part 16: Laboratory measurement of the sound reduction index improvement by additional lining [Withdrawn: replaced with ISO 10140-(1–5)] |
|||
* ISO 4246:1994 Cinematography – Vocabulary |
|||
** ISO 140-18:2006 Part 18: Laboratory measurement of sound generated by rainfall on building elements [Withdrawn: replaced with ISO 10140-(1,5):2016] |
|||
* ISO 4247:1977 Jig bushes and accessories for drilling purposes — Dimensions [Withdrawn without replacement] |
|||
* ISO 141:1976 Textile machinery and accessories — Pirn winders and cross winders — Definition of left and right sides |
|||
* ISO 4248:1978 Jig bushes – Definitions and nomenclature |
|||
* ISO 142:1976 Textile machinery and accessories — Weaving preparatory machines — Definition of left and right sides |
|||
* ISO 4249 Motorcycle tyres and rims (Code-designated series) |
|||
* ISO 143:1977 Textile machinery and accessories — Weft pirns for automatic looms [Withdrawn without replacement] |
|||
** ISO 4249-1:1985 Part 1: Tyres |
|||
* ISO 144:1973 Steel — Reverse bend testing of wire [Withdrawn: replaced with ISO 7801] |
|||
** ISO 4249-2:1990 Part 2: Tyre load ratings |
|||
* ISO/R 145:1960 Steel — Wrapping test for wire [Withdrawn: replaced with ISO 7802] |
|||
** ISO 4249-3:2010 Part 3: Rims |
|||
* ISO 146:1984 Metallic materials — Hardness test — Verification of Vickers hardness testing machines HV 0,2 to HV 100 [Withdrawn: replaced with ISO 6507-2] |
|||
* ISO 4250 Earth-mover tyres and rims |
|||
** ISO 146-2:1993 Metallic materials — Verification of Vickers hardness testing machines — Part 2: Less than HV 0,2 [Withdrawn: replaced with ISO 6507-2] |
|||
** ISO 4250-1:2017 Part 1: Tyre designation and dimensions |
|||
* ISO/R 147:1960 Load calibration of testing machines for tensile testing of steel [Withdrawn: replaced with ISO 7500-1] |
|||
** ISO 4250-2:2017 Part 2: Loads and inflation pressures |
|||
* ISO 148 Metallic materials — Charpy pendulum impact test |
|||
** ISO 4250-3:2020 Part 3: Rims |
|||
** ISO 148-1:2016 Part 1: Test method |
|||
* ISO 4251 Code designated diagonal tyres (ply rating marked series) for agricultural tractors, trailers and machines |
|||
** ISO |
** ISO 148-2:2016 Part 2: Verification of testing machines |
||
** ISO 148-3:2016 Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines |
|||
** ISO 4251-2:2019 Part 2: Tyre load ratings |
|||
* ISO/R 149:1960 Modified Erichsen cupping test for steel sheet and strip [Withdrawn: replaced with ISO 8490] |
|||
* ISO 150:2018 Raw, refined and boiled linseed oil for paints and varnishes — Specifications and methods of test |
|||
** ISO 4251-4:2010 Part 4: Tyre classification and nomenclature [Withdrawn without replacement] |
|||
* ISO 151:1974 Shipbuilding details — Marking of hatchway beams [Withdrawn without replacement] |
|||
* ISO/R 152:1960 Shipbuilding details — Marking of wooden hatchway covers [Withdrawn without replacement] |
|||
* ISO 4252:2007 Agricultural tractors — Operator's workplace, access and exit — Dimensions |
|||
* ISO |
* ISO/R 153:1960 Shipbuilding details — Ordinary Glasses for scuttles and lights — Dimensions [Withdrawn without replacement] |
||
* ISO/R 154: Shipbuilding details — Marking of rolled, drawn and extruded products in light metals or in light alloys [Withdrawn without replacement] |
|||
* ISO 4254 Agricultural machinery — Safety |
|||
* ISO 155:2019 Belt drives — Pulleys — Limiting values for adjustment of centres |
|||
** ISO 4254-1:2013 Part 1: General requirements |
|||
* ISO 156:1982 Metallic materials — Hardness test — Verification of Brinell hardness testing machines [Withdrawn: replaced with ISO 6506-2] |
|||
** ISO 4254-2:1986 Part 2: Anhydrous ammonia applicators [Withdrawn without replacement] |
|||
* ISO 157:1996 Coal — Determination of forms of sulfur |
|||
** ISO 4254-3:1992 Part 3: Tractors [Withdrawn: replaced with ISO 26322-(1,2)] |
|||
* ISO/R 158:1960 Coal — Determination of ash [Withdrawn: replaced with ISO 1171] |
|||
* ISO/R 159:1960 Coal — Determination of total sulfur by the Strambi method [Withdrawn without replacement] |
|||
** ISO 4254-5:2018 Part 5: Power-driven soil-working machines |
|||
* ISO 160:1980 Asbestos-cement pressure pipes and joints [Withdrawn without replacement] |
|||
** ISO 4254-6:2020 Part 6: Sprayers and liquid fertilizer distributors |
|||
* ISO 161 Thermoplastics pipes for the conveyance of fluids — Nominal outside diameters and nominal pressures |
|||
** ISO 4254-7:2017 Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harvesters |
|||
** ISO |
** ISO 161-1:2018 Part 1: Metric series |
||
** ISO |
** ISO 161-2:1996 Part 2: Inch-based series |
||
* ISO 162:1985 Cinematography — Head gaps and sound records for three-, four-, or six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-picture film containing no picture — Positions and width dimensions |
|||
** ISO 4254-10:2009 Part 10: Rotary tedders and rakes |
|||
* ISO/R 163:1960 Cinematography — Magnetic striping of 16 mm film perforated along both edges [Withdrawn without replacement] |
|||
** ISO 4254-11:2010 Part 11: Pick-up balers |
|||
* ISO/R 164:1960 Aluminium and aluminium alloys — Castings — Chemical composition [Withdrawn: replaced with ISO 3522] |
|||
** ISO 4254-12:2012 Part 12: Rotary disc and drum mowers and flail mowers |
|||
* ISO/R 165:1960 Metallic materials — Steel tubes — Flanging test [Withdrawn: replaced with ISO 8494] |
|||
** ISO 4254-13:2012 Part 13: Large rotary mowers |
|||
* ISO/R 166:1960 Metallic materials — Steel tubes — Drift expanding test [Withdrawn: replaced with ISO 8493] |
|||
** ISO 4254-14:2016 Part 14: Bale wrappers |
|||
* ISO/R 167:1960 Metallic materials — Steel tubes — Bend test [Withdrawn: replaced with ISO 8491] |
|||
** ISO 4254-15 Part 15: Row-crop flail mowers [Abandoned draft] |
|||
* ISO/R 168:1960 Stretchers [Withdrawn without replacement] |
|||
** ISO 4254-16:2018 Part 16: Portable agricultural grain augers |
|||
* ISO/R 169:1960 Sizes of photocopies (on paper) readable without optical devices [Withdrawn without replacement] |
|||
** ISO 4254-17:2022 Part 17: Root crop harvesters |
|||
* ISO/R 170:1960 Shipbuilding — Anchor Chains — Stud links [Withdrawn: replaced with ISO 1704] |
|||
* ISO 4256:1996 Liquefied petroleum gases — Determination of gauge vapour pressure — LPG method |
|||
* ISO 171:1980 Plastics — Determination of bulk factor of moulding materials |
|||
* ISO 4257:2001 Liquefied petroleum gases — Method of sampling |
|||
* ISO 172:1978 Plastics — Phenol-formaldehyde mouldings — Detection of free ammonia |
|||
* ISO 4259 Petroleum and related products — Precision of measurement methods and results |
|||
* ISO/R 173:1961 Plastics — Determination of the percentage of styrene in polystyrene with Wijs solution [Withdrawn without replacement] |
|||
* ISO 174:1974 Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of viscosity number in dilute solution [Withdrawn: replaced with ISO 1628-2] |
|||
** ISO 4259-2:2017 Part 2: Interpretation and application of precision data in relation to methods of test |
|||
* ISO 175:2010 Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals |
|||
** ISO 4259-3:2020 Part 3: Monitoring and verification of published precision data in relation to methods of test |
|||
* ISO 176:2005 Plastics — Determination of loss of plasticizers — Activated carbon method |
|||
** ISO 4259-4:2021 Part 4: Use of statistical control charts to validate 'in-statistical-control' status for the execution of a standard test method in a single laboratory |
|||
* ISO |
* ISO 177:2016 Plastics — Determination of migration of plasticizers |
||
* ISO 178:2019 Plastics — Determination of flexural properties |
|||
* ISO 4261:2013 Petroleum products — Fuels (class F) — Specifications of gas turbine fuels for industrial and marine applications |
|||
* ISO |
* ISO 179 Plastics — Determination of Charpy impact properties |
||
** ISO 179-1:2010 Part 1: Non-instrumented impact test |
|||
* ISO 4263 Petroleum and related products — Determination of the ageing behaviour of inhibited oils and fluids — TOST test |
|||
** ISO |
** ISO 179-2:2020 Part 2: Instrumented impact test |
||
* ISO 180:2019 Plastics — Determination of Izod impact strength |
|||
** ISO 4263-2:2003 Part 2: Procedure for category HFC hydraulic fluids |
|||
* ISO 181:1981 Plastics — Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod [Withdrawn without replacement] |
|||
** ISO 4263-3:2015 Part 3: Anhydrous procedure for synthetic hydraulic fluids |
|||
* ISO 182 Plastics — Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures |
|||
** ISO 4263-4:2006 Part 4: Procedure for industrial gear oils |
|||
** ISO 182-1:1990 Part 1: Congo red method |
|||
* ISO 4264:2018 Petroleum products — Calculation of cetane index of middle-distillate fuels by the four variable equation |
|||
** ISO 182-2:1990 Part 2: pH method |
|||
* ISO 4265:1986 Petroleum products — Lubricating oils and additives — Determination of phosphorus content — Quinoline phosphomolybdate method [Withdrawn without replacement] |
|||
** ISO 182-3:1993 Part 3: Conductometric method |
|||
* ISO 4266 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods |
|||
** ISO |
** ISO 182-4:1993 Part 4: Potentiometric method |
||
* ISO 183:1976 Plastics — Qualitative evaluation of the bleeding of colorants [Withdrawn without replacement] |
|||
** ISO 4266-2:2002 Part 2: Measurement of level in marine vessels |
|||
* ISO/R 184:1961 Grey cast irons — Brinell hardness test [Withdrawn without replacement] |
|||
** ISO 4266-3:2002 Part 3: Measurement of level in pressurized storage tanks (non-refrigerated) |
|||
* ISO 185:2020 Grey cast irons — Classification |
|||
** ISO 4266-4:2002 Part 4: Measurement of temperature in atmospheric tanks |
|||
* ISO 186:2002 Paper and board — Sampling to determine average quality |
|||
* ISO 187:1990 Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
|||
** ISO 4266-6:2002 Part 6: Measurement of temperature in pressurized storage tanks (non-refrigerated) |
|||
* ISO 188:2011 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
|||
* ISO 4267 Petroleum and liquid petroleum products — Calculation of oil quantities |
|||
* ISO/R 189:1961 Principles of operation of standards marks [Withdrawn without replacement] |
|||
** ISO 4267-1 Part 1: Static measurement [Rejected draft] |
|||
* ISO/R 190:1961 Tensile testing of light metals and their alloys [Withdrawn: replaced with ISO 6892-1] |
|||
** ISO 4267-2:1988 Part 2: Dynamic measurement |
|||
* ISO/R 191:1971 Brinell hardness test for light metals and their alloys [Withdrawn: replaced with ISO 6506-1 and ISO 6506-4] |
|||
* ISO 4268:2000 Petroleum and liquid petroleum products — Temperature measurements — Manual methods |
|||
* ISO/R 192:1971 Wickers hardness test for light metals and their alloys [Withdrawn: replaced with ISO 6507-1 and ISO 6507-4] |
|||
* ISO 4269:2001 Petroleum and liquid petroleum products — Tank calibration by liquid measurement — Incremental method using volumetric meters |
|||
* ISO/R 193:1961 Microcopies on transparent bases: sizes of recommended bases [Withdrawn without replacement] |
|||
* ISO 4270 Petroleum products – Determination of density and relative density – Reischauer pyknometer method [Rejected draft] |
|||
* ISO 194:1981 Plastics — List of equivalent terms [Withdrawn: replaced with ISO 472] |
|||
* ISO 4271 Petroleum products – Determination of density and relative density – Conical pyknometer method [Rejected draft] |
|||
* ISO/R 195:1961 Copper and copper alloys — Drift expanding test [Withdrawn: replaced with ISO 8493] |
|||
* ISO 4272 Intelligent transport systems — Truck platooning systems (TPS) — Functional and operational requirements [Under development; original draft with this number unknown] |
|||
* ISO 196:1978 Wrought copper and copper alloys — Detection of residual stress — Mercury(I) nitrate test |
|||
* ISO 4273 Intelligent transport systems — Automated braking during low speed manoeuvring (ABLS) — Requirements and test procedures [Under development; original draft with this number unknown] |
|||
* ISO 197 Copper and copper alloys — Terms and definitions |
|||
* ISO 4274:1977 Urea for industrial use — Determination of biuret content — Flame atomic absorption and photometric absorption methods [Withdrawn without replacement] |
|||
** ISO 197-1:1983 Part 1: Materials |
|||
* ISO 4275:1977 Ammonium hydrogen carbonate for industrial use (including foodstuffs) — Determination of arsenic content — Silver diethyldithiocarbamate photometric method [Withdrawn without replacement] |
|||
** ISO 197-2:1983 Part 2: Unwrought products (Refinery shapes) |
|||
* ISO 4276:1978 Anhydrous ammonia for industrial use — Evaluation of residue on evaporation — Gravimetric method [Withdrawn without replacement] |
|||
** ISO 197-3:1983 Part 3: Wrought products |
|||
* ISO/TR 4277:2009 Cryolite, natural and artificial — Conventional test for evaluation of free fluorides content |
|||
** ISO 197-4:1983 Part 4: Castings |
|||
* ISO 4278:1977 Sodium fluoride for industrial use — Determination of carbonate content — Gravimetric method [Withdrawn without replacement] |
|||
** ISO 197-5:1980 Part 5: Methods of processing and treatment |
|||
* ISO 4279:1977 Aluminium fluoride for industrial use — Determination of sodium content — Flame emission spectrophotometric method [Withdrawn without replacement] |
|||
* ISO/R 198:1961 Double-deck flat pallets for through transit of goods [Withdrawn without replacement] |
|||
* ISO 4280:1977 Cryolite, natural and artificial, and aluminium fluoride for industrial use — Determination of sulphate content — Barium sulphate gravimetric method |
|||
* ISO 199:2014 Rolling bearings — Thrust bearings — Geometrical product specification (GPS) and tolerance values |
|||
* ISO 4281:1977 Sodium hexafluorosilicate for industrial use — Determination of free acidity and total hexafluorosilicate content — Titrimetric method |
|||
* ISO 4282:1992 Acid-grade and ceramic-grade fluorspar — Determination of loss in mass at 105 degrees C [Withdrawn without replacement] |
|||
== ISO 200 – ISO 499 == |
|||
* ISO 4283:1993 All grades of fluorspar — Determination of carbonate content — Titrimetric method [Withdrawn without replacement] |
|||
* ISO |
* ISO/R 200:1961 Rolling bearings — Tolerances — Definitions [Withdrawn: replaced with ISO 1132] |
||
* ISO/R 201:1961 Rolling bearings — Radial internal clearance in unloaded radial groove type ball bearings with cylindrical bore [Withdrawn: replaced with ISO 5753] |
|||
* ISO 4285:1977 Phosphoric acid for industrial use — Guide to sampling techniques |
|||
* ISO |
* ISO/R 202:1961 Metallic materials — Steel tubes — Flattening Test [Withdrawn: replaced with ISO 8492] |
||
* ISO/R 203:1961 Metallic materials — Interrupted uniaxial creep testing in tension — Method of test [Withdrawn without replacement] |
|||
* ISO 4287:1997 Geometrical Product Specifications (GPS) – Surface texture: Profile method – Terms, definitions and surface texture parameters [Withdrawn: replaced with ISO 21920-2] |
|||
* ISO 204:2018 Metallic materials — Uniaxial creep testing in tension — Method of test |
|||
* ISO 4288:1996 Geometrical Product Specifications (GPS) – Surface texture: Profile method – Rules and procedures for the assessment of surface texture [Withdrawn: replaced with ISO 21920-3] |
|||
* ISO/R 205:1961 Steel — Determination of proof stress and proving test at elevated temperature [Withdrawn: replaced with ISO 783, and later ISO 6892-2] |
|||
* ISO 4289 Recommendation and specification of HVOF cermet coatings for metallurgical roll components [Under development; originally planned ISO 4289 was Instruments for the measurement of surface roughness by the profile method contact (stylus) instruments of consecutive profile transformation - Profile recording instruments calibration and means] |
|||
* ISO/R 206:1961 Steel — Creep stress rupture testing of at elevated temperatures [Withdrawn: replaced with ISO 204] |
|||
* ISO 4290 Agricultural wheeled tractors and attachments — Front loaders — Dimensional and operational ratings [Under development; original draft with this number unknown] |
|||
* ISO 207:1980 Magnesium and magnesium alloys — Unalloyed magnesium — Chemical composition [Withdrawn: replaced with ISO 8287] |
|||
* ISO 4291:1985 Methods for the assessment of departure from roundness – Measurement of variations in radius |
|||
* ISO/R 208:1961 Aluminium and aluminium alloys — Castings — Chemical composition (complement to ISO/R 164) [Withdrawn: replaced with ISO 3522] |
|||
* ISO 4292:1985 Methods for the assessment of departure from roundness — Measurement by two- and three-point methods [Withdrawn without replacement] |
|||
* ISO 209:2007 Aluminium and aluminium alloys — Chemical composition |
|||
* ISO 4293:1982 Manganese ores and concentrates — Determination of phosphorus content — Extraction-molybdovanadate photometric method |
|||
* ISO/TS 210:2014 Essential oils — General rules for packaging, conditioning and storage |
|||
* ISO 4294:1984 Manganese ores and concentrates — Determination of copper content — Extraction-spectrometric and spectrometric methods [Withdrawn without replacement] |
|||
* ISO/TS 211:2014 Essential oils — General rules for labelling and marking of containers |
|||
* ISO 4295:1988 Manganese ores and concentrates — Determination of aluminium content — Photometric and gravimetric methods |
|||
* ISO |
* ISO 212:2007 Essential oils — Sampling |
||
* ISO 213:1982 Machine tools — Lathe tool posts — Overall internal height [Withdrawn without replacement] |
|||
** ISO 4296-1:1984 Part 1: Increment sampling |
|||
* ISO 214:1976 Documentation — Abstracts for publications and documentation |
|||
** ISO 4296-2:1983 Part 2: Preparation of samples |
|||
* ISO 215:1986 Documentation — Presentation of contributions to periodicals and other serials |
|||
* ISO 4297:1978 Manganese ores and concentrates — Methods of chemical analysis — General instructions |
|||
* [[ISO 216]]:2007 Writing paper and certain classes of printed matter — Trimmed sizes — A and B series, and indication of machine direction |
|||
* ISO 4298:1984 Manganese ores and concentrates — Determination of manganese content — Potentiometric method |
|||
* [[ISO 217]]:2013 Paper — Untrimmed sizes — Designation and tolerances for primary and supplementary ranges, and indication of machine direction |
|||
* ISO 4299:1989 Manganese ores — Determination of moisture content |
|||
* ISO |
* ISO/R 218:1961 Scale of 35 mm microfilms for international exchange [Withdrawn without replacement] |
||
* ISO/R 219:1961 Pesticides — Common names — Second series of terms [Withdrawn: replaced with ISO 1750] |
|||
* ISO 4301 Cranes – Classification |
|||
* ISO/R 220:1961 Textile fibres — Some methods of sampling for testing [Withdrawn: replaced with ISO 1130] |
|||
** ISO 4301-1:2016 Part 1: General |
|||
* ISO 221:1976 Metallic materials — Steel tubes — Wall thicknesses [Withdrawn without replacement] |
|||
** ISO 4301-2:2020 Part 2: Mobile cranes |
|||
* ISO/R 222:1968 Aerospace — Characteristics of aircraft electrical systems [Withdrawn: replaced with ISO 1540] |
|||
** ISO 4301-3:2021 Part 3: Tower cranes |
|||
* ISO 223:1975 Aircraft — Ground support electrical supplies — General requirements [Withdrawn: replaced with ISO 6858] |
|||
** ISO 4301-4:1989 Part 4: Jib cranes |
|||
* ISO/TR 224:1998 Aircraft — Declaration of design and performance for aircraft equipment — Standard form [Withdrawn without replacement] |
|||
** ISO 4301-5:1991 Part 5: Overhead travelling and portal bridge cranes |
|||
* ISO 225:2010 Fasteners — Bolts, screws, studs and nuts — Symbols and descriptions of dimensions |
|||
* ISO 4302:2016 Cranes — Wind load assessment |
|||
* [[ISO 226]]:2003 Acoustics — Normal [[equal-loudness-level contour]]s |
|||
* ISO 4304:1987 Cranes other than mobile and floating cranes — General requirements for stability |
|||
* ISO 227:1978 Textile machinery and accessories — Single box pickers for centre tip shuttles for automatic looms and related picking stick dimensions [Withdrawn without replacement] |
|||
* ISO 4305:2014 Mobile cranes — Determination of stability |
|||
* [[ISO 228]] Pipe threads where pressure-tight joints are not made on the threads |
|||
* ISO 4306 Cranes – Vocabulary |
|||
* ISO 229:1973 Machine tools — Speeds and feeds |
|||
** ISO 4306-1:2007 Part 1: General |
|||
* ISO 230 Test code for machine tools |
|||
** ISO 230-1:2012 Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions |
|||
** ISO 4306-3:2016 Part 3: Tower cranes |
|||
** ISO 230-2:2014 Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes |
|||
** ISO 4306-4:2020 Part 4: Jib cranes |
|||
** ISO |
** ISO 230-3:2020 Part 3: Determination of thermal effects |
||
** ISO 230-4:2005 Part 4: Circular tests for numerically controlled machine tools |
|||
* ISO 4307:2021 Molecular in vitro diagnostic examinations — Specifications for pre-examination processes for saliva — Isolated human DNA [Original draft with this number was related to cranes] |
|||
** ISO 230-5:2000 Part 5: Determination of the noise emission |
|||
* ISO 4308 Cranes and lifting appliances — Selection of wire ropes |
|||
** ISO 230-6:2002 Part 6: Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests) |
|||
** ISO 4308-1:2003 Part 1: General [Withdrawn: replaced with ISO 16625] |
|||
** ISO |
** ISO 230-7:2015 Part 7: Geometric accuracy of axes of rotation |
||
** ISO/TR 230-8:2010 Part 8: Vibrations |
|||
* ISO 4309:2017 Cranes — Wire ropes — Care and maintenance, inspection and discard |
|||
** ISO/TR 230-9:2005 Part 9: Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations |
|||
* ISO 4310:2009 Cranes — Test code and procedures |
|||
** ISO 230-10:2016 Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools |
|||
* ISO 4311:1979 Anionic and non-ionic surface active agents — Determination of the critical micellization concentration — Method by measuring surface tension with a plate, stirrup or ring |
|||
** ISO/TR 230-11:2018 Part 11: Measuring instruments suitable for machine tool geometry tests |
|||
* ISO 4312:1989 Surface active agents — Evaluation of certain effects of laundering — Methods of analysis and test for unsoiled cotton control cloth |
|||
* ISO/R 231:1961 Paper vocabulary — Third series of terms [Withdrawn: replaced with ISO 4046] |
|||
* ISO 4313:1976 Washing powders — Determination of total phosphorus(V) oxide content — Quinoline phosphomolybdate gravimetric method |
|||
* ISO/R 232:1961 Straight-sides splines and gauges — Dimensions in inches [Withdrawn without replacement] |
|||
* ISO 4314:1977 Surface active agents — Determination of free alkalinity or free acidity — Titrimetric method |
|||
* [[ISO 233]] Information and documentation — Transliteration of Arabic characters into Latin characters<ref name=VariesBetweenParts group=Note /> |
|||
* ISO 4315:1977 Surface active agents — Determination of alkalinity — Titrimetric method |
|||
* ISO 234 Files and rasps |
|||
* ISO 4316:1977 Surface active agents — Determination of pH of aqueous solutions — Potentiometric method |
|||
** ISO 234-1:1983 Part 1: Dimensions |
|||
* ISO 4317:2011 Surface-active agents and detergents — Determination of water content — Karl Fischer methods |
|||
** ISO 234-2:1982 Part 2: Characteristics of cut |
|||
* ISO 4318:1989 Surface active agents and soaps — Determination of water content — Azeotropic distillation method |
|||
* ISO 235:2016 Parallel shank jobber and stub series drills and Morse taper shank drills |
|||
* ISO 4319:1977 Surface active agents — Detergents for washing fabrics — Guide for comparative testing of performance |
|||
* ISO 236 Reamers<ref name=VariesBetweenParts group=Note /> |
|||
* ISO 4320:1977 Non-ionic surface active agents — Determination of cloud point index — Volumetric method |
|||
** ISO 236-1:1976 Hand reamers |
|||
* ISO 4321:1977 Washing powders — Determination of active oxygen content — Titrimetric method |
|||
** ISO 236-2:2013 Part 2: Long fluted machine reamers with Morse taper shanks |
|||
* ISO 4322:1977 Non-ionic surface active agents — Determination of sulphated ash — Gravimetric method |
|||
* ISO 237:1975 Rotating tools with parallel shanks — Diameters of shanks and sizes of driving squares |
|||
* ISO 4323:2018 Soaps — Determination of chloride content — Potentiometric method |
|||
* ISO 238:2016 Reduction sleeves and extension sockets for tools with Morse taper shanks |
|||
* ISO 4324:1977 Surface active agents — Powders and granules — Measurement of the angle of repose |
|||
* ISO 239:1999 Drill chuck tapers |
|||
* ISO 4325:1990 Soaps and detergents — Determination of chelating agent content — Titrimetric method |
|||
* ISO 240:2016 Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandrels |
|||
* ISO 4326:1980 Non-ionic surface active agents — Polyethoxylated derivatives — Determination of hydroxyl value — Acetic anhydride method |
|||
* ISO 241:1994 Shanks for turning and planing tools — Shapes and dimensions of the section |
|||
* ISO 4327:1979 Non-ionic surface active agents — Polyalkoxylated derivatives — Determination of hydroxyl value — Phthalic anhydride method |
|||
* ISO 242:2014 Carbide tips for brazing on turning tools |
|||
* ISO 4328 Centre holes [Rejected draft] |
|||
* ISO |
* ISO 243:2014 Turning tools with carbide tips — External tools |
||
* ISO 244:1979 Aircraft — Sealing wire |
|||
* ISO 4330:1994 Photography — Determination of the curl of photographic film and paper [Withdrawn: replaced with ISO 18910] |
|||
* ISO 245:1998 Aerospace — Lockwire — Diameters |
|||
* ISO 4331:1986 Photography — Processed photographic black-and-white film for archival records — Silver-gelatin type on cellulose ester base — Specifications [Withdrawn: replaced with ISO 10602, now replaced with ISO 18901] |
|||
* ISO 246:2007 Rolling bearings — Cylindrical roller bearings, separate thrust collars — Boundary dimensions |
|||
* ISO 4332:1986 Photography — Processed photographic black-and-white film for archival records — Silver-gelatin type on poly(ethylene terephthalate) base — Specifications [Withdrawn: replaced with ISO 10602, now replaced with ISO 18901] |
|||
* ISO 247 Rubber — Determination of ash |
|||
* ISO 4333 Textiles — Determination of reduction activity of specific proteins derived from pollen, mite and other sources on textile products [Under development; original draft with this number unknown] |
|||
** ISO 247-1:2018 Part 1: Combustion method |
|||
* ISO 4334 Fruit puree — Specifications and test methods [Under development; original draft with this number unknown] |
|||
** ISO 247-2:2018 Part 2: Thermogravimetric analysis (TGA) |
|||
* ISO/IEC 4335:1993 Information technology —- Telecommunications and information exchange between systems — High-level data link control (HDLC) procedures — Elements of procedures [Withdrawn: replaced with ISO/IEC 13239] |
|||
* ISO 248 Rubber, raw – Determination of volatile-matter content |
|||
* ISO 4336:1981 Numerical control of machines — Specification of interface signals between the numerical control unit and the electrical equipment of an NC machine [Withdrawn without replacement] |
|||
** ISO 248-1:2011 Part 1: Hot-mill method and oven method |
|||
* ISO 4337:1977 Information processing – Interchangeable magnetic twelve-disk pack (100 Mbytes) [Withdrawn without replacement] |
|||
** ISO 248-2:2019 Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit |
|||
* ISO 4338 Information processing – Magnetic tape cassette [Rejected draft; a later proposed ISO 4338 Conceptual model and system architecture of smart classroom was deleted in 2021] |
|||
* ISO 249:2016 Rubber, raw natural — Determination of dirt content |
|||
* ISO 4339:2022 Information technology for learning, education and training — Reference model for information and communications technology (ICT) evaluation in education [Original draft with this number related to Information processing] |
|||
* ISO/R 250:1962 Rubber, raw natural — Sampling and preparation [Withdrawn: replaced with ISO 1795 and ISO 1796 (which was later replaced by ISO 1795)] |
|||
* ISO 4340 Water aggressiveness evaluation and optimized lining choice [Under development; original draft with this number related to Information processing] |
|||
* ISO 251:2012 Conveyor belts with textile carcass — Widths and lengths |
|||
* ISO 4341:1978 Information processing – Magnetic tape cassette and cartridge labelling and file structure for information interchange |
|||
* ISO 252:2007 Conveyor belts — Adhesion between constitutive elements — Test methods |
|||
* ISO 4342:1985 Numerical control of machines — NC processor input — Basic part program reference language |
|||
* ISO/R 253:1962 Belt drives — Grooved pulleys — sections Y and Z [Withdrawn: replaced with ISO 4183] |
|||
* ISO 4343:2000 Industrial automation systems — Numerical control of machines — NC processor output — Post processor commands |
|||
* ISO |
* ISO 254:2011 Belt drives — Pulleys — Quality, finish and balance |
||
* ISO 255:1990 Belt drives — Pulleys for V-belts (system based on datum width) — Geometrical inspection of grooves |
|||
* ISO 4345:1988 Steel wire ropes — Fibre main cores — Specification |
|||
* ISO/R 256:1962 Belt drives — Section checking for V-belts [Withdrawn without replacement] |
|||
* ISO 4346:1977 Steel wire ropes for general purposes – Lubricants – Basic requirements |
|||
* ISO 257:2018 Pesticides and other agrochemicals — Principles for the selection of common names |
|||
* ISO 4347:2015 Leaf chains, clevises and sheaves — Dimensions, measuring forces, tensile strengths and dynamic strengths |
|||
* ISO |
* ISO/R 258:1961 Pesticides — Common names — Third series of terms [Withdrawn: replaced with ISO 1750] |
||
* [[ISO 259]] Information and documentation — Transliteration of Hebrew characters into Latin characters<ref name=VariesBetweenParts group=Note /> |
|||
* ISO 4349 Solid recovered fuels — Method for the determination of the Recycling-Index [Under development; original draft with this number was Genera! principles for the verification of safety of concrete structures] |
|||
* ISO/R 260:1962 Terms related to microcopies and their bases [Withdrawn without replacement] |
|||
* ISO 4351 Geometrical product specifications (GPS) — Association [Under development; original draft with this number unknown] |
|||
* [[ISO 261]]:1998 ISO general purpose metric screw threads — General plan |
|||
* ISO 4354:2009 Wind actions on structures |
|||
* [[ISO 262]]:1998 ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
|||
* ISO 4355:2013 Bases for design of structures — Determination of snow loads on roofs |
|||
* ISO 263:1973 ISO inch screw threads — General plan and selection for screws, bolts and nuts — Diameter range 0,06 to 6 in' |
|||
* ISO 4356:1977 Bases for the design of structures — Deformations of buildings at the serviceability limit states [Withdrawn without replacement] |
|||
* ISO 264:1976 Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure — Laying lengths — Metric series [Withdrawn: replaced with ISO 1452-3] |
|||
* ISO 4357 Rules for use of the I.S. system of units in buildings [Rejected draft] |
|||
* ISO 265 Pipes and fittings of plastics materials — Fittings for domestic and industrial waste pipes — Basic dimensions: Metric series |
|||
* ISO 4358 Test methods for civil multi-copter unmanned aircraft system [Under development; original draft with this number unknown] |
|||
** ISO 265-1:1988 Part 1: Unplasticized poly(vinyl chloride) (PVC-U) |
|||
* ISO 4359:2013 Flow measurement structures – Rectangular, trapezoidal and U-shaped flumes |
|||
* ISO 266:1997 Acoustics — Preferred frequencies |
|||
* ISO 4360:2020 Hydrometry – Open channel flow measurement using triangular profile weirs |
|||
* ISO/R 267:1962 Aircraft — Figures for instrument dials and number plates [Withdrawn without replacement] |
|||
* ISO 4361 Liquid flow measurement in open channels by weirs and flumes – Round nosed broad crested weirs [Rejected draft] |
|||
* ISO 268:1980 Aircraft — Mechanical and electromechanical indicators — General requirements |
|||
* ISO 4362:1999 Hydrometric determinations – Flow measurement in open channels using structures – Trapezoidal broad-crested weirs |
|||
* [[ISO 269]]:1985 Correspondence envelopes – Designation and sizes [Withdrawn without replacement] |
|||
* ISO 4363:2002 Measurement of liquid flow in open channels – Methods for measurement of characteristics of suspended sediment |
|||
* ISO 270:1975 Textile fibres — Determination of length by measuring individual fibres [Withdrawn: replaced with ISO 6989] |
|||
* ISO 4364:1997 Measurement of liquid flow in open channels – Bed material sampling |
|||
* ISO/R 271:1962 Textiles — Implementation of the Tex System for designating the size of fibres [Withdrawn: replaced with ISO 1144] |
|||
* ISO 4365:2005 Liquid flow in open channels – Sediment in streams and canals – Determination of concentration, particle size distribution and relative density |
|||
* ISO 272:1982 Fasteners — Hexagon products — Widths across flats |
|||
* ISO 4366:2007 Hydrometry – Echo sounders for water depth measurements |
|||
* ISO |
* ISO 273:1979 Fasteners — Clearance holes for bolts and screws |
||
* ISO 274:1975 Copper tubes of circular section — Dimensions [Withdrawn without replacement] |
|||
* ISO 4370 Environmental life cycle assessment and recycling of ductile iron pipes for water applications [Under development; original draft with this number unknown] |
|||
* ISO/R 275:1962 Zinc Oxide for paints — Requirements and methods of test [Withdrawn without replacement] |
|||
* ISO 4371:1984 Measurement of liquid flow in open channels by weirs and flumes – End depth method for estimation of flow in non-rectangular channels with a free overfall (approximate method) [Withdrawn: replaced with ISO 18481] |
|||
* ISO 276:2019 Binders for paints and varnishes — Linseed stand oil — Requirements and methods of test |
|||
* ISO 4373:2022 Hydrometry – Water level measuring devices |
|||
* ISO 277:2002 Binders for paints and varnishes — Raw tung oil — Requirements and methods of test |
|||
* ISO 4374:1990 Liquid flow measurement in open channels – Round-nose horizontal broad-crested weirs |
|||
* ISO/R 278:1962 Essential oils — Standard layout for methods of analysis of essential oils [Withdrawn without replacement] |
|||
* ISO 4375:2014 Hydrometry – Cableway systems for stream gauging |
|||
* ISO 279:1998 Essential oils — Determination of relative density at 20 degrees C – Reference method |
|||
* ISO 4376 Cycle Energy Requirement — Acceptance Test [Under development; original draft with this number unknown] |
|||
* ISO 280:1998 Essential oils — Determination of refractive index |
|||
* ISO 4377:2012 Hydrometric determinations – Flow measurement in open channels using structures – Flat-V weirs |
|||
* ISO |
* ISO 281:2007 Rolling bearings — Dynamic load ratings and rating life |
||
* ISO 282:1992 Conveyor belts — Sampling |
|||
** ISO 4378-1:2017 Part 1: Design, bearing materials and their properties |
|||
* ISO 283:2015 Textile conveyor belts — Full thickness tensile strength, elongation at break and elongation at the reference load — Test method |
|||
** ISO 4378-2:2017 Part 2: Friction and wear |
|||
* ISO 284:2012 Conveyor belts – Electrical conductivity – Specification and test method |
|||
** ISO 4378-3:2017 Part 3: Lubrication |
|||
* ISO/R 285:1962 Metallic materials — Steel tubes — Butt welding bends |
|||
** ISO 4378-4:2009 Part 4: Basic symbols |
|||
* ISO 286 Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes |
|||
** ISO 4378-5:2009 Part 5: Application of symbols |
|||
** ISO |
** ISO 286-1:2010 Part 1: Basis of tolerances, deviations and fits |
||
** ISO 286-2:2010 Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
|||
* ISO 4379:2018 Plain bearings — Copper alloy bushes |
|||
* ISO 287:2017 Paper and board — Determination of moisture content of a lot — Oven-drying method |
|||
* ISO 4380 Plain bearings – Method of calculation of hydrodynamic thrust bearings (Rejected draft; now covered by ISO 12131-1) |
|||
* ISO/R 288 |
|||
* ISO 4381:2011 Plain bearings — Tin casting alloys for multilayer plain bearings |
|||
** ISO/R 288-1:1963 Part 1: Slotted and castle nuts with metric thread [Withdrawn without replacement] |
|||
* ISO 4382 Plain bearings — Copper alloys |
|||
** ISO/R 288-2:1969 Part 2: Slotted and castle nuts with metric thread 42 up to and including 100 mm thread diameter [Withdrawn without replacement] |
|||
** ISO 4382-1:2021 Part 1: Cast copper alloys for solid and multilayer thick-walled plain bearings |
|||
* ISO 289 Rubber, unvulcanized — Determinations using a shearing-disc viscometer |
|||
** ISO 4382-2:2021 Part 2: Wrought copper alloys for solid plain bearings |
|||
** ISO 289-1:2015 Part 1: Determination of Mooney viscosity |
|||
* ISO 4383:2012 Plain bearings — Multilayer materials for thin-walled plain bearings |
|||
** ISO 289-2:2020 Part 2: Determination of pre-vulcanization characteristics |
|||
* ISO 4384 Plain bearings — Hardness testing of bearing metals |
|||
** ISO 289-3:2015 Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR |
|||
** ISO 4384-1:2019 Part 1: Multilayer bearings materials |
|||
** ISO |
** ISO 289-4:2003 Part 4: Determination of the Mooney stress-relaxation rate |
||
* ISO/R 290:1961 Pesticides — Common names — Fourth series of terms [Withdrawn: replaced by ISO 1750] |
|||
* ISO 4385:1981 Plain bearings — Compression testing of metallic bearing materials |
|||
* ISO 291:2008 Plastics — Standard atmospheres for conditioning and testing |
|||
* ISO 4386 Plain bearings — Metallic multilayer plain bearings |
|||
* ISO/R 292:1967 Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics [Withdrawn: replaced by ISO 1133] |
|||
** ISO 4386-1:2019 Part 1: Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm |
|||
* ISO 293:2004 Plastics — Compression moulding of test specimens of thermoplastic materials |
|||
** ISO 4386-3:2019 Part 2: Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm |
|||
* ISO 294 Plastics — Injection moulding of test specimens of thermoplastic materials |
|||
* ISO 4387:2019 Cigarettes — Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine |
|||
** ISO 294-1:2017 Part 1: General principles, and moulding of multipurpose and bar test specimens |
|||
* ISO 4388:1991 Cigarettes — Determination of the smoke condensate retention index of a filter — Direct spectrometric method |
|||
** ISO 294-2:2018 Part 2: Small tensile bars |
|||
* ISO 4389:2000 Tobacco and tobacco products — Determination of organochlorine pesticide residues — Gas chromatographic method |
|||
** ISO 294-3:2020 Part 3: Small plates |
|||
* ISO 4391:1983 Hydraulic fluid power — Pumps, motors and integral transmissions — Parameter definitions and letter symbols |
|||
* ISO |
** ISO 294-4:2018 Part 4: Determination of moulding shrinkage |
||
** ISO |
** ISO 294-5:2017 Part 5: Preparation of standard specimens for investigating anisotropy |
||
* ISO 295:2004 Plastics — Compression moulding of test specimens of thermosetting materials |
|||
** ISO 4392-2:2002 Part 2: Startability |
|||
* ISO 296:1991 Machine tools — Self-holding tapers for tool shanks |
|||
** ISO 4392-3:1993 Part 3: At constant flow and at constant torque |
|||
* ISO 297:1988 7/24 tapers for tool shanks for manual changing |
|||
* ISO 4393:2015 Fluid power systems and components — Cylinders — Basic series of piston strokes |
|||
* ISO 298:1973 Machine tools — Lathe centres — Sizes for interchangeability |
|||
* ISO 4394 Fluid power systems and components — Cylinder barrels |
|||
* ISO 299:1987 Machine tool tables — T-slots and corresponding bolts |
|||
** ISO 4394-1:1980 Part 1: Requirements for steel tubes with specially finished bores [Withdrawn without replacement] |
|||
* ISO/R 300 Rolling bearings — ISO identification code |
|||
* ISO 4395:2009 Fluid power systems and components — Cylinder piston rod end types and dimensions |
|||
** ISO/R 300-1:1963 Rolling bearings — ISO identification code for group I: Radial Ball and Rolling Bearings, group II: Thrust Ball and Rolling Bearings, and group III: Tapered Rolling Bearings, Metric Series [Withdrawn without replacement] |
|||
* ISO 4396 Telecommunications and information exchange between systems — Future network recursive inter-network architecture [Under development; original DPR with this number related to fluid power]<ref>{{cite book |url=https://www.google.com/books/edition/World_Metric_Standards_for_Engineering/vhApAQAAMAAJ?hl=en&gbpv=1&bsq=ISO%20DPR%204396| isbn=9780831111137 | title=World Metric Standards for Engineering | year=1978 | publisher=Industrial Press }}</ref> |
|||
** ISO/R 300-2:1965 Rolling bearings — ISO identification code for group IV: Tapered Rolling Bearings, Inch Series [Withdrawn without replacement] |
|||
* ISO 4397:2011 Fluid power connectors and associated components — Nominal outside diameters of tubes and nominal hose sizes |
|||
* ISO 301:2006 Zinc alloy ingots intended for castings |
|||
* ISO 4398 Intelligent transport systems — Guided transportation service planning data exchange [Under development; original DPR with this number related to fluid power]<ref>{{cite book |url=https://www.google.com/books/edition/World_Metric_Standards_for_Engineering/vhApAQAAMAAJ?hl=en&gbpv=1&bsq=ISO%20DPR%204398| isbn=9780831111137 | title=World Metric Standards for Engineering | year=1978 | publisher=Industrial Press }}</ref> |
|||
* [[ISO 302]]:2015 Pulps — Determination of [[Kappa number]] |
|||
* ISO 4399:2019 Fluid power systems and components — Connectors and associated components — Nominal pressures |
|||
* ISO 303:2002 Road vehicles — Installation of lighting and light signalling devices for motor vehicles and their trailers [Withdrawn without replacement] |
|||
* ISO 4400:1994 Fluid power systems and components — Three-pin electrical plug connectors with earth contact — Characteristics and requirements |
|||
* ISO 304:1985 Surface active agents — Determination of surface tension by drawing up liquid films |
|||
* ISO 4401:2005 Hydraulic fluid power — Four-port directional control valves — Mounting surfaces |
|||
* ISO 305:2019 Plastics — Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds — Discoloration method |
|||
* ISO 4402:1991 Hydraulic fluid power — Calibration of automatic-count instruments for particles suspended in liquids — Method using classified AC Fine Test Dust contaminant [Withdrawn: replaced with ISO 11171] |
|||
* ISO |
* [[ISO 306]]:2013 Plastics — Thermoplastic materials – Determination of [[Vicat softening point|Vicat softening temperature (VST)]] |
||
* ISO 307:2019 Plastics — Polyamides — Determination of viscosity number |
|||
* ISO 4404-1:2012 Part 1: Water-containing fluids |
|||
* ISO 308:1994 Plastics — Phenolic moulding materials — Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) |
|||
* ISO 4404-2:2010 Part 2: Non-aqueous fluids |
|||
* ISO/R 309 Manganese ores — Methods of sampling |
|||
* ISO 4405:1991 Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the gravimetric method |
|||
** ISO/R 309-1:1963 Manganese ores — Methods of sampling — Part 1: Ore loaded in freight wagons [Withdrawn without replacement] |
|||
* ISO 4406:2021 Hydraulic fluid power — Fluids — Method for coding the level of contamination by solid particles |
|||
* ISO |
* ISO 310:1992 Manganese ores and concentrates — Determination of hygroscopic moisture content in analytical samples — Gravimetric method |
||
* ISO |
* ISO/R 311:1963 Manganese ores and concentrates — Determination of silicon content [Withdrawn: replaced with ISO 5890] |
||
* ISO 312:1986 Manganese ores — Determination of active oxygen content, expressed as manganese dioxide — Titrimetric method |
|||
* ISO 4409 Hydraulic fluid power — Positive-displacement pumps, motors and integral transmissions — Methods of testing and presenting basic steady state performance |
|||
* ISO/R 313:1963 Manganese ores and concentrates — Determination of total iron content [Withdrawn: replaced with ISO 7990] |
|||
* ISO 4410 Experimental characterization of in-plane permeability of fibrous reinforcements for liquid composite moulding [Under development; original draft with this number unknown] |
|||
* ISO |
* ISO 314:1981 Manganese ores — Determination of carbon dioxide content — Gravimetric method [Withdrawn without replacement] |
||
* ISO 315:1984 Manganese ores and concentrates — Determination of nickel content — Dimethylglyoxime spectrometric method and flame atomic absorption spectrometric method |
|||
* ISO 4412 Hydraulic fluid power – Test code for determination of airborne noise levels |
|||
* ISO 316:1982 Manganese ores — Determination of cobalt content — Nitroso-R-salt photometric method [Withdrawn without replacement] |
|||
** ISO 4412-1:1991 Part 1: Pumps |
|||
* ISO 317:1984 Manganese ores and concentrates — Determination of arsenic content — Spectrometric method |
|||
** ISO 4412-2:1991 Part 2: Motors |
|||
* ISO/R 318:1963 Manganese ores and concentrates — Determination of aluminium content [Withdrawn: replaced with ISO 4295] |
|||
** ISO 4412-3:1991 Part 3: Pumps – Method using a parallelepiped microphone array |
|||
* ISO/R 319:1963 Manganese ores and concentrates — Determination of manganese content [Withdrawn: replaced with ISO 4298] |
|||
* ISO 4413:2010 Hydraulic fluid power – General rules and safety requirements for systems and their components |
|||
* ISO 320:1981 Manganese ores — Determination of sulphur content — Barium sulphate gravimetric methods and sulphur dioxide titrimetric method after combustion |
|||
* ISO 4414:2010 Pneumatic fluid power — General rules and safety requirements for systems and their components |
|||
* ISO |
* ISO/R 321:1963 Manganese ores and concentrates — Determination of phosphorus content [Withdrawn: replaced with ISO 4293] |
||
* ISO |
* ISO/R 322:1978 Manganese ores and concentrates — Determination of copper content [Withdrawn: replaced with ISO 4294] |
||
* ISO/R 323:1963 Manganese ores and concentrates — Determination of lead content [Withdrawn without replacement] |
|||
* ISO 4417:1977 Size designation of clothes — Headwear [Withdrawn: replaced with ISO 8559-2] |
|||
* ISO |
* ISO 324:1978 Textile machinery and accessories — Cones for cross winding for dyeing purposes — Half angle of the cone 4 degrees 20' [Withdrawn: replaced with ISO 8489-4] |
||
* ISO/R 325:1963 Textile machinery and accessories — Wood cones for cross winding — Half angle of the cone 4 degrees 20' [Withdrawn without replacement] |
|||
* ISO 4419 Health informatics — Reducing clinicians burden [Under development; original draft with this number unknown] |
|||
* ISO/R 326:1963 Textile machinery and accessories — Wood cones for cross winding — Nominal half angle of the cone 5 degrees 57' [Withdrawn without replacement] |
|||
* ISO 4420 Fluid power control components [Rejected draft] |
|||
* ISO/R 327:1963 Textile machinery and accessories — Wood cones for cross winding — Half angle of the cone 3 degrees 30' [Withdrawn without replacement] |
|||
* ISO 4421 Health informatics — Introduction to Ayurveda [Under development; original draft with this number unknown] |
|||
* ISO 328:1974 Picture postcards and lettercards — Size [Withdrawn without replacement] |
|||
* ISO 4422 Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications |
|||
* ISO/R 329:1963 Large pallets for through transit of goods [Withdrawn without replacement] |
|||
* ISO/R 330:1963 Thermoplastics pipes for the conveyance of fluids — Nominal outside diameters and nominal pressures — Inch-based series [Withdrawn: replaced with ISO 161-2] |
|||
* ISO 331:1983 Coal — Determination of moisture in the analysis sample — Direct gravimetric method [Withdrawn without replacement] |
|||
** ISO 4422-3:1996 Part 3: Fittings and joints [Withdrawn: replaced with ISO 1452-3] |
|||
* ISO 332:1981 Coal — Determination of nitrogen — Macro Kjeldahl method [Withdrawn without replacement] |
|||
* ISO 333:1996 Coal — Determination of nitrogen — Semi-micro Kjeldahl method [Withdrawn without replacement] |
|||
* ISO 334:2020 Coal and coke — Determination of total sulfur — Eschka method |
|||
* ISO 4424 Genomics Informatics — Data Elements and their Metadata for Describing the Tumor Mutation Burden (TMB) Information of Clinical Massive Parallel DNA Sequencing [Under development; original draft with this number unknown] |
|||
* ISO 335:1974 Hard coal — Determination of caking power — Roga test [Withdrawn without replacement] |
|||
* ISO 4425 Genomics Informatics — Data elements and their metadata for describing the microsatellite instability (MSI) information of clinical massive parallel DNA sequencing [Under development; original draft with this number unknown] |
|||
* ISO 336:1976 Plain end steel tubes, welded and seamless — General table of dimensions and masses per unit length [Withdrawn: replaced with ISO 4200] |
|||
* ISO 4426:2021 Intelligent transport systems — Lower layer protocols for usage in the European digital tachograph [Original draft with this number unknown] |
|||
* ISO 337:1981 Road vehicles — 50 semi-trailer fifth wheel coupling pin — Basic and mounting/interchangeability dimensions |
|||
* ISO 4427 Plastics piping systems for water supply and for drainage and sewerage under pressure — Polyethylene (PE) |
|||
* ISO/R 338:1963 Lifeboats for less than one hundred people [Withdrawn without replacement] |
|||
* ISO 4427-1:2019 Part 1: General |
|||
* ISO/R 339:1963 Definition of terms appearing in ISO recommendations for oils and pigments [Withdrawn without replacement] |
|||
* ISO 4427-2:2019 Part 2: Pipes |
|||
* ISO 340:2013 Conveyor belts — Laboratory scale flammability characteristics — Requirements and test method |
|||
* ISO 4427-3:2019 Part 3: Fittings |
|||
* ISO 341:1976 Textile machinery and accessories — Cotton spinning machinery — Working width [Withdrawn without replacement] |
|||
* ISO 4427-5:2019 Part 5: Fitness for purpose of the system |
|||
* ISO 342:1983 Textile machinery and accessories — Worsted and woollen cards — Width of cylinder and width on the wire [Withdrawn without replacement] |
|||
* ISO 4428 [Rejected draft related to engineering]<ref>{{cite book |url=https://www.google.com/books/edition/World_Metric_Standards_for_Engineering/vhApAQAAMAAJ?hl=en&gbpv=1&bsq=ISO/DIS+4428&dq=ISO/DIS+4428&printsec=frontcover| isbn=9780831111137 | title=World Metric Standards for Engineering | year=1978 | publisher=Industrial Press }}</ref> |
|||
* ISO/R 343:1963 Textile machinery and accessories — Warp tubes for ring spinning and ring doubling spindles — inch dimensions, tolerances, and gauges [Withdrawn without replacement] |
|||
* ISO 4429 [Rejected draft related to engineering]<ref>{{cite book |url=https://www.google.com/books/edition/World_Metric_Standards_for_Engineering/vhApAQAAMAAJ?hl=en&gbpv=1&bsq=ISO/DIS%204429| isbn=9780831111137 | title=World Metric Standards for Engineering | year=1978 | publisher=Industrial Press }}</ref> |
|||
* ISO 344:1981 Textile machinery and accessories — Spinning machines — Flyer bobbins [Withdrawn without replacement] |
|||
* ISO 4433 Thermoplastics pipes — Resistance to liquid chemicals — Classification |
|||
* ISO/R 345:1963 Shipbuilding details — Tests on galvanized steel wire ropes [Withdrawn without replacement] |
|||
** ISO 4433-1:1997 Part 1: Immersion test method |
|||
* ISO/R 346:1963 Shipbuilding details — Galvanized steel wire ropes [Withdrawn without replacement] |
|||
** ISO 4433-2:1997 Part 2: Polyolefin pipes |
|||
* ISO/R 347:1963 Shipbuilding details — Anchor chains- End shackles [Withdrawn without replacement] |
|||
** ISO 4433-3:1997 Part 3: Unplasticized poly(vinyl chloride) (PVC-U), high-impact poly (vinyl chloride) (PVC-HI) and chlorinated poly (vinyl chloride) (PVC-C) pipes |
|||
* ISO 348:1981 Hard coal — Determination of moisture in the analysis sample — Direct volumetric method [Withdrawn without replacement] |
|||
** ISO 4433-4:1997 Part 4: Poly(vinylidene fluoride) (PVDF) pipes |
|||
* ISO 349:2020 Hard coal — Audibert-Arnu dilatometer test |
|||
* ISO 4434:1977 Unplasticized polyvinyl chloride (PVC) adaptor fittings for pipes under pressure — Laying length and size of threads — Metric series [Withdrawn: replaced with ISO 1452-3] |
|||
* ISO/R 350:1963 Hard coal — Determination of chlorine by the bomb-combustion method [Withdrawn without replacement] |
|||
* ISO 4435:2003 Plastics piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U) |
|||
* ISO 351:1996 Solid mineral fuels — Determination of total sulfur — High temperature combustion method [Withdrawn without replacement] |
|||
* ISO 4437 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) |
|||
* ISO 352:1981 Solid mineral fuels — Determination of chlorine — High temperature combustion method [Withdrawn without replacement] |
|||
** ISO 4437-1:2014 Part 1: General |
|||
* ISO 353:1975 Processed writing paper and certain classes of printed matter — Method of expression of dimensions [Withdrawn without replacement] |
|||
** ISO 4437-2:2014 Part 2: Pipes |
|||
* ISO 354:2003 Acoustics — Measurement of sound absorption in a reverberation room |
|||
** ISO 4437-3:2014 Part 3: Fittings |
|||
* ISO 355:2019 Rolling bearings — Tapered roller bearings — Boundary dimensions and series designations |
|||
** ISO 4437-4:2014 Part 4: Valves |
|||
* ISO 356:1996 Essential oils — Preparation of test samples |
|||
* ISO/R 357:1963 Acoustics — Expression of the physical magnitudes of sound or noise in air [Withdrawn: replaced with ISO 131, now withdrawn without replacement] |
|||
* ISO 4439:1969 Unplasticized polyvinyl chloride (PVC) pipes and fittings — Determination and specification of density |
|||
* ISO 358:1975 Cinematography — Maximum aspect ratio of projector aperture for projection of 35 mm non-anamorphic motion-picture film — Specifications [Withdrawn without replacement] |
|||
* ISO 4440 Thermoplastics pipes and fittings — Determination of melt mass-flow rate |
|||
* ISO 359:1983 Cinematography — Projectable image area on 16 mm motion-picture prints — Dimensions and location |
|||
* ISO 4440-1:1994 Part 1: Test method [Withdrawn without replacement] |
|||
* ISO 360:1975 Cinematography — Recording and reproducing head gaps for four-track magnetic sound records on 35 mm motion-picture film containing no picture — Positions and width dimensions [Withdrawn: replaced with ISO 162] |
|||
* ISO 4440-2:1994 Part 2: Test conditions [Withdrawn without replacement] |
|||
* [[ISO 361]]:1975 Basic ionizing radiation symbol |
|||
* ISO 4443:2022 Cryolite primarily used for the production of aluminium — Determination of elements — Wavelength-dispersive X-ray fluorescence spectrometric method using pressed powder tablets [Original draft with this number unknown] |
|||
* ISO 362 Measurement of noise emitted by accelerating road vehicles — Engineering method |
|||
* ISO 4444 Agricultural sprayers — Recording of spray drift parameters [Under development: original draft with this number unknown] |
|||
** ISO 362-1:2015 Part 1: M and N categories |
|||
* ISO/TR 4445:2021 Intelligent transport systems — Mobility integration — Role model of ITS service application in smart cities [Original draft with this number unknown] |
|||
** ISO 362-2:2009 Part 2: L category |
|||
* ISO 4447:2022 Intelligent transport systems — Mobility integration — Comparison of two mainstream integrated mobility concepts [Original draft with this number unknown] |
|||
** ISO 362-3:2016 Part 3: Indoor testing M and N categories |
|||
* ISO 4449 Unplasticized polyvinyl chloride (PVC) pipes and fittings — Determination of longitudinal reversion — oven method [Rejected draft] |
|||
* ISO 363 Textile machinery and accessories — Flat steel healds with closed end loops |
|||
* ISO/TR 4450:2020 Quality management systems — Guidance for the application of ISO 19443:2018 [Original draft with this number unknown] |
|||
** ISO 363-1:2006 Part 1: Dimensions of healds manufactured of rolled steel wire |
|||
* ISO 4451 Polyethylene (PE) pipes and fittings — Determination of reference density of uncoloured and black polyethylenes [Withdrawn without replacement] |
|||
** ISO 363-2:2006 Part 2: Dimensions of healds manufactured of hardened strip steel |
|||
* ISO 4453 Polyethylene (PE) pipes and fittings — Determination of longitudinal reversion — Determination of longitudinal reversion — oven method [Rejected draft] |
|||
* ISO 364:1983 Textile machinery and accessories — Twin wire healds for weaving machines with heald frames |
|||
* ISO 4454 Genomics informatics — Phenopackets: A format for phenotypic data exchange [Under development: original draft with this number unknown] |
|||
* ISO 365:1982 Textile machinery and accessories — Twin wire healds with inset mail for Jacquard weaving |
|||
* ISO 4455 Fixing method for parallel shanks [Rejected draft] |
|||
* ISO 366 Textile machinery and accessories — Reeds |
|||
* ISO 4456 [Rejected draft]<ref>{{cite book |url=https://www.google.com/books/edition/World_Metric_Standards_for_Engineering/vhApAQAAMAAJ?hl=en&gbpv=1&bsq=fixing+method+for+parallel+ISO&dq=fixing+method+for+parallel+ISO&printsec=frontcover| isbn=9780831111137 | title=World Metric Standards for Engineering | year=1978 | publisher=Industrial Press }}</ref> |
|||
** ISO 366-2:2009 Part 2: Dimensions and designation of metal reeds with plate baulk |
|||
* ISO 4457 [Rejected draft] |
|||
** ISO 366-3:2009 Part 3: Dimensions and designation of metal reeds with double-spring baulk |
|||
* ISO 4458 [Rejected draft] |
|||
** ISO 366-4:2005 Part 4: Dimensions and designation of plastic-bound metal reeds |
|||
* ISO 4459 [Rejected draft] |
|||
** ISO 366-5:2006 Part 5: Dimensions and designation of profile capsules |
|||
* ISO 4460 [Rejected draft] |
|||
* ISO 367:1976 Textile machinery and accessories — Metal reeds with plate baulk — Dimensions [Withdrawn: replaced with ISO 366-2] |
|||
* ISO 4461 [Rejected draft] |
|||
* ISO 368:2017 Spinning preparatory, spinning and doubling (twisting) machinery — Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64 |
|||
* ISO 4462 Tolerances for building [Rejected draft] |
|||
* ISO 369:2009 Machine tools — Symbols for indications appearing on machine tools |
|||
* ISO 4463 Measurement methods for building — Setting-out and measurement |
|||
* ISO 370:1975 Toleranced dimensions — Conversion from inches into millimetres and vice versa [Withdrawn without replacement] |
|||
* ISO 4463-1:1989 Part 1: Planning and organization, measuring procedures, acceptance criteria |
|||
* ISO/R 371:1964 Terms relating to microcopy apparatus [Withdrawn without replacement] |
|||
* ISO 4463-2:1995 Part 2: Measuring stations and targets |
|||
* ISO/R 372:1964 Paper vocabulary — Fourth series of terms [Withdrawn: replaced with ISO 4046] |
|||
* ISO 4463-3:1995 Part 3: Check-lists for the procurement of surveys and measurement services |
|||
* ISO/R 373:1964 General principles for fatigue testing of metals [Withdrawn without replacement] |
|||
* ISO 4464:1980 Tolerances for building — Relationship between the different types of deviations and tolerances used for specification [Withdrawn: replaced with ISO 1803, now replaced by ISO 6707-1] |
|||
* ISO 374 Protective gloves against dangerous chemicals and micro-organisms |
|||
* ISO 4465 Textiles — Animal welfare in the supply chain — General requirements for the production, preparation and traceability of Angora rabbit fibre, including ethical claims and supporting information [Under development: original draft with this number unknown] |
|||
** ISO 374-1:2016 Part 1: Terminology and performance requirements for chemical risks |
|||
* ISO 4466 Layout of monolingual classified vocabularies [Rejected draft] |
|||
** ISO 374-2:2019 Part 2: Determination of resistance to penetration |
|||
* ISO/TR 4467:1982 Addendum modification of the teeth of cylindrical gears for speed-reducing and speed-increasing gear pairs [Withdrawn: replaced with ISO 21771] |
|||
** ISO 374-4:2019 Part 4: Determination of resistance to degradation by chemicals |
|||
* ISO 4468:2020 Gear hobs — Accuracy requirements |
|||
** ISO 374-5:2016 Part 5: Terminology and performance requirements for micro-organisms risks |
|||
* ISO 4469:1981 Wood — Determination of radial and tangential shrinkage [Withdrawn: replaced with ISO 13061-13] |
|||
* ISO |
* ISO 375:1974 Steel — Tensile testing of tubes [Withdrawn: replaced with ISO 6892-1] |
||
* ISO 376:2011 Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines |
|||
* ISO 4471:1982 Wood — Sampling sample trees and logs for determination of physical and mechanical properties of wood in homogeneous stands |
|||
* ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
|||
* ISO 4472:1983 Coniferous and broadleaved sawn timber — Transportation packages |
|||
* ISO |
* ISO 378:1980 Gymnastic equipment — Parallel bars [Withdrawn without replacement] |
||
* ISO 379:1980 Gymnastic equipment — Horizontal bar [Withdrawn without replacement] |
|||
* ISO 4474:1989 Coniferous and broadleaved tree sawlogs — Visible defects — Terms and definitions [Withdrawn: replaced with ISO 24294] |
|||
* ISO/R 380:1964 Gymnastic equipment — Rings [Withdrawn without replacement] |
|||
* ISO 4475:1989 Coniferous and broadleaved tree sawlogs — Visible defects — Measurement |
|||
* ISO |
* ISO/R 381:1964 Gymnastic equipment — Vaulting horse and pommeled horse [Withdrawn without replacement] |
||
* ISO/R 382:1964 Gymnastic equipment — Balancing Beam [Withdrawn without replacement] |
|||
* ISO 4477 Coniferous sawlogs — Sizes and tolerances [Rejected draft] |
|||
* ISO 383:1976 Laboratory glassware — Interchangeable conical ground joints |
|||
* ISO 4480 Coniferous sawlogs — Measurement of sizes and determination of volume [Withdrawn: replaced with ISO 13059] |
|||
* ISO 384:2015 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments |
|||
* ISO 4481:1977 Cutlery and flatware – Nomenclature |
|||
* ISO 385:2005 Laboratory glassware — Burettes |
|||
* ISO 4482:1979 Asbestos-cement pipelines — Guide for laying [Withdrawn without replacement] |
|||
* ISO |
* ISO 386:1977 Liquid-in-glass laboratory thermometers — Principles of design, construction and use [Withdrawn without replacement] |
||
* ISO 387:1977 Hydrometers — Principles of construction and adjustment |
|||
* ISO 4484 Textiles and textile products — Microplastics from textile sources [Under development: original draft with this number unknown] |
|||
* ISO/R 388:1964 ISO metric series for basic thicknesses of sheet and diameters of wire [Withdrawn without replacement] |
|||
** ISO 4484-1 Part 1: Determination of material loss from fabrics during washing [Under development] |
|||
* ISO 389 Acoustics — Reference zero for the calibration of audiometric equipment |
|||
** ISO 4484-2 Part 2: Qualitative and quantitative evaluation of microplastics [Under development] |
|||
** ISO 389-1:2017 Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones |
|||
** ISO 4484-3 Part 3: Measurement of collected material mass released from textile end products by domestic washing method [Under development] |
|||
** ISO 389-2:1994 Part 2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones |
|||
* ISO 4486:1985 Asbestos-cement ventilation ducts and fittings — Dimensions and characteristics [Withdrawn without replacement] |
|||
** ISO 389-3:2016 Part 3: Reference equivalent threshold vibratory force levels for pure tones and bone vibrators |
|||
* ISO 4488:1979 Asbestos-cement pipes and joints for thrust-boring and pipe jacking [Withdrawn without replacement] |
|||
** ISO 389-4:1994 Part 4: Reference levels for narrow-band masking noise |
|||
* ISO 4489:2019 Hardmetals — Sampling and testing |
|||
** ISO 389-5:2006 Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz |
|||
* ISO 4490:2018 Metallic powders — Determination of flow rate by means of a calibrated funnel (Hall flowmeter) |
|||
** ISO 389-6:2007 Part 6: Reference threshold of hearing for test signals of short duration |
|||
* ISO 4491 Metallic powders — Determination of oxygen content by reduction methods |
|||
** ISO 389-7:2019 Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions |
|||
** ISO 4491-1:1989 Part 1: General guidelines |
|||
** ISO 389-8:2004 Part 8: Reference equivalent threshold sound pressure levels for pure tones and circumaural earphones |
|||
** ISO 4491-2:1997 Part 2: Loss of mass on hydrogen reduction (hydrogen loss) |
|||
** ISO 389-9:2009 Part 9: Preferred test conditions for the determination of reference hearing threshold levels |
|||
** ISO 4491-3:1997 Part 3: Hydrogen-reducible oxygen |
|||
* ISO 390:1993 Products in fibre-reinforced cement — Sampling and inspection |
|||
** ISO 4491-4:2019 Part 4: Total oxygen by reduction-extraction |
|||
* ISO 391:1982 Building and sanitary pipes in asbestos-cement [Withdrawn without replacement] |
|||
* ISO 4492:2017 Metallic powders, excluding powders for hardmetals — Determination of dimensional changes associated with compacting and sintering |
|||
* ISO 392:1986 Asbestos-cement pipe fittings for building and sanitary purposes |
|||
* ISO 4493:1981 Metallic powders — Determination of hydrogen reducible oxygen content [Withdrawn: Replaced with ISO 4491-3] |
|||
* ISO 393 Asbestos-cement products — Corrugated sheets and fittings for roofing and cladding |
|||
* ISO 4495:1978 Lubricated metallic powders — Determination of lubricant content — Soxhlet extraction method [Withdrawn: Replaced with ISO 13944] |
|||
** ISO 393-1:1983 Asbestos-cement products — Part 1: Corrugated sheets and fittings for roofing and cladding [Withdrawn without replacement] |
|||
* ISO 4496:2017 Metallic powders — Determination of acid-insoluble content in iron, copper, tin and bronze powders |
|||
** ISO 393-2:1986 Asbestos-cement products — Part 2: Asbestos-cement-cellulose corrugated sheets and fittings for roofing and cladding [Withdrawn without replacement] |
|||
* ISO 4497:2020 Metallic powders — Determination of particle size by dry sieving |
|||
** ISO 393-3:1984 Asbestos-cement products — Part 3: Asymmetrical section corrugated sheets and fittings for roofing and cladding [Withdrawn without replacement] |
|||
* ISO 4498:2010 Sintered metal materials, excluding hardmetals — Determination of apparent hardness and microhardness |
|||
** ISO 393-4:1986 Asbestos-cement products — Part 4: Trapezoidal section sheets for roofing and cladding [Withdrawn without replacement] |
|||
* ISO 4499 Hardmetals — Metallographic determination of microstructure |
|||
** ISO 393-5:1987 Asbestos-cement products — Part 5: Short corrugated and asymmetrical section sheets and fittings for roofing [Withdrawn without replacement] |
|||
* ISO 4499-1:2020 Part 1: Photomicrographs and description |
|||
* ISO/R 394:1964 Asymmetrical section corrugated sheets in asbestos-cement for roofing and cladding [Withdrawn without replacement] |
|||
* ISO 4499-2:2020 Part 2: Measurement of WC grain size |
|||
* ISO 395:1983 Asbestos-cement slates [Withdrawn without replacement] |
|||
* ISO 4499-3:2016 Part 3: Measurement of microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals |
|||
* ISO 396 Products in fibre reinforced cement |
|||
* ISO 4499-4:2016 Part 4: Characterisation of porosity, carbon defects and eta-phase content |
|||
** ISO 396-1:1980 Part 1: Asbestos-cement flat sheets [Withdrawn without replacement] |
|||
* ISO 4548 Methods of test for full-flow lubricating oil filters for internal combustion engines |
|||
** ISO |
** ISO 396-2:1980 Part 2: Silica-asbestos-cement flat sheets [Withdrawn without replacement] |
||
** ISO 396-3:1980 Part 3: Cellulose-asbestos-cement flat sheets [Withdrawn without replacement] |
|||
* ISO 4551:1987 Ferroalloys – Sampling and sieve analysis |
|||
* ISO/R 397:1964 Copper and copper alloys — Wire — Wrapping test [Withdrawn: replaced with ISO 7802] |
|||
* ISO 4552 Ferroalloys – Sampling and sample preparation for chemical analysis |
|||
* ISO/R 398:1964 Copper and copper alloys — Bend test [Withdrawn: replaced with ISO 7438] |
|||
** ISO 4552-1:1987 Part 1: Ferrochromium, ferrosilicochromium, ferrosilicon, ferrosilicomanganese, ferromanganese |
|||
* ISO/R 399:1964 Copper and copper alloys — Vickers hardness test [Withdrawn: replaced with ISO 6507-1 and ISO 6507-4] |
|||
** ISO 4552-2:1987 Part 2: Ferrotitanium, ferromolybdenum, ferrotungsten, ferroniobium, ferrovanadium |
|||
* ISO/R 400:1964 Copper and copper alloys — Tensile test [Withdrawn: replaced with ISO 6892-1] |
|||
* ISO 4578 Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method |
|||
* ISO/R 401:1964 Copper and copper alloys — Tubes of circular section — Tensile test [Withdrawn: replaced with ISO 6892-1] |
|||
* ISO 4582 Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources |
|||
* ISO/R 402:1964 Copper and copper alloys — Wire — Tensile test [Withdrawn: replaced with ISO 6892-1] |
|||
* ISO 4587 Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies |
|||
* ISO/R 403:1964 Copper and copper alloys — Brinell hardness test [Withdrawn: replaced with ISO 6506-1 and ISO 6506-4] |
|||
* ISO 4618:2014 Paints and varnishes – Terms and definitions |
|||
* ISO 404:2013 Steel and steel products — General technical delivery requirements |
|||
* [[ISO 4628]] Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance |
|||
* ISO/R 405:1964 Aircraft — Tow bar attachment fittings — Interface requirements [Withdrawn: replaced with ISO 8267, and later ISO 8267-1 and ISO 8267-2] |
|||
** ISO 4628-1 General introduction and designation system |
|||
* ISO 406:1987 Technical drawings — Tolerancing of linear and angular dimensions [Withdrawn: replaced with ISO 129-1 and ISO 14405-2] |
|||
** ISO 4628-2 Assessment of degree of blistering |
|||
* ISO 407:2004 Small medical gas cylinders — Pin-index yoke-type valve connections |
|||
** ISO 4628-3 Assessment of degree of rusting |
|||
* ISO/R 408:1964 Safety Colours [Withdrawn: replaced with ISO 3864-1] |
|||
** ISO 4628-4 Assessment of degree of cracking |
|||
* ISO 409 Metallic materials — Hardness test — Tables of Vickers hardness values for use in tests made on flat surfaces |
|||
** ISO 4628-5 Assessment of degree of flaking |
|||
** ISO 409-1:1982 Metallic materials — Hardness test — Tables of Vickers hardness values for use in tests made on flat surfaces — Part 1: HV 5 to HV 100 [Withdrawn: replaced with ISO 6507-1 and ISO 6507-4] |
|||
** ISO 4628-6 Assessment of degree of chalking by tape method |
|||
** ISO 409-2:1983 Metallic materials — Hardness test — Tables of Vickers hardness values for use in tests made on flat surfaces — Part 2: HV 0,2 to less than HV 5 [Withdrawn: replaced with ISO 6507-1 and ISO 6507-4] |
|||
** ISO 4628-7 Assessment of degree of chalking by velvet method |
|||
* ISO 410:1982 Metallic materials — Hardness test — Tables of Brinell hardness values for use in tests made on flat surfaces [Withdrawn: replaced with ISO 6506-1 and ISO 6506-4] |
|||
** ISO 4628-8 Assessment of degree of delamination and corrosion around a scribe |
|||
* ISO/R 411:1964 Pesticides — Common names — Fifth series of terms [Withdrawn: replaced with ISO 1750] |
|||
** ISO 4628-10 Assessment of degree of filiform corrosion |
|||
* ISO 412:1976 Gum spirit of turpentine and wood turpentines for paints and varnishes [Withdrawn without replacement] |
|||
* ISO 4648:1991 Rubber, vulcanized or thermoplastic — Determination of dimensions of test pieces and products for test purposes [Withdrawn: replaced with ISO 23529] |
|||
* ISO |
* ISO 413:1974 Aircraft — Heads of lubricating nipples |
||
* ISO/R 414:1965 Aircraft — Tyre Valves [Withdrawn without replacement] |
|||
** ISO 4661-1:1993 Rubber, vulcanized or thermoplastic — Preparation of samples and test pieces — Part 1: Physical tests [Withdrawn: replaced with ISO 23529] |
|||
* ISO 415:1975 Envelopes, postcards and similar articles — Cancellation area [Withdrawn without replacement] |
|||
** ISO 4661-2:2018 Rubber, vulcanized — Preparation of samples and test pieces — Part 2: Chemical tests |
|||
* ISO 416:1974 Picture postcards — Area reserved for the address [Withdrawn without replacement] |
|||
* ISO 4683 Raw sheep skins |
|||
* ISO 417:1993 Photography — Determination of residual thiosulfate and other related chemicals in processed photographic materials — Methods using iodine-amylose, methylene blue and silver sulfide [Withdrawn: replaced with ISO 18917] |
|||
** ISO 4683-1:1998 Part 1: Descriptions of defects |
|||
* ISO 418:2001 Photography — Processing chemicals — Specifications for anhydrous sodium sulfite |
|||
* ISO 4720:2009 Essential oils – Nomenclature |
|||
* ISO 419:1972 Photography — Processing chemicals — Specifications for sodium thiosulfate pentahydrate [Withdrawn: replaced with ISO 10636] |
|||
* ISO 4730:2017 Essential oil of Melaleuca, terpinen-4-ol type (Tea Tree oil) |
|||
* ISO 420:1994 Photography — Processing chemicals — Specifications for potassium bromide |
|||
* ISO 4786:1977 Enclosed-scale adjustable-range thermometers |
|||
* ISO/R 421:1965 Photography — Processing chemicals — Method for indicating the stability of the images of processed black-and white films, plates, and papers [Withdrawn without replacement] |
|||
* ISO 4787:2010 Laboratory glassware – Volumetric instruments – Methods for testing of capacity and for use |
|||
* ISO 422:1994 Photography — Processing chemicals — Specifications for p-methylaminophenol sulfate |
|||
* ISO 4788:2005 Laboratory glassware – Graduated measuring cylinders |
|||
* ISO 423:1994 Photography — Processing chemicals — Specifications for hydroquinone |
|||
* ISO 4791 Laboratory apparatus – Vocabulary relating to apparatus made essentially from glass, porcelain or vitreous silica |
|||
* ISO 424:1994 Photography — Processing chemicals — Specifications for anhydrous sodium carbonate and sodium carbonate monohydrate |
|||
** ISO 4791-1:1985 Part 1: Names for items of apparatus |
|||
* ISO 425:1973 Photography — Sensitized materials — Quantity packaging [Withdrawn without replacement] |
|||
* ISO 4795:1996 Glass for thermometer bulbs |
|||
* ISO 426 Wrought copper-zinc alloys — Chemical composition and forms of wrought products |
|||
* ISO 4801:1979 Glass alcoholometers and alcohol hydrometers not incorporating a thermometer |
|||
**ISO 426-1:1983 Wrought copper-zinc alloys — Chemical composition and forms of wrought products — Part 1: Non-leaded and special copper-zinc alloys [Withdrawn without replacement] |
|||
* ISO 4805:1982 Laboratory glassware – Thermo-alcoholometers and alcohol-thermohydrometers |
|||
**ISO 426-2:1983 Wrought copper-zinc alloys — Chemical composition and forms of wrought products — Part 2: Leaded copper-zinc alloys [Withdrawn without replacement] |
|||
* ISO 4824:1993 Dentistry — Ceramic denture teeth [Withdrawn: replaced with ISO 22112] |
|||
* ISO 427:1983 Wrought copper-tin alloys — Chemical composition and forms of wrought products [Withdrawn without replacement] |
|||
* ISO 4831:2006 Microbiology of food and animal feeding stuffs – Horizontal method for the detection and enumeration of [[Coliform|coliforms]] – Most probable number technique |
|||
* ISO 428:1983 Wrought copper-aluminium alloys — Chemical composition and forms of wrought products [Withdrawn without replacement] |
|||
* ISO 4832:2006 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of coliforms – Colony-count technique |
|||
* ISO 429:1983 Wrought copper-nickel alloys — Chemical composition and forms of wrought products [Withdrawn without replacement] |
|||
* ISO 4833 Microbiology of the food chain – Horizontal method for the enumeration of microorganisms |
|||
* ISO 430:1983 Wrought copper-nickel-zinc alloys — Chemical composition and forms of wrought products [Withdrawn without replacement] |
|||
** ISO 4833-1:2013 Part 1: Colony count at 30 degrees C by the pour plate technique |
|||
* ISO 431:1981 Copper refinery shapes [Withdrawn without replacement] |
|||
** ISO 4833-2:2013 Part 2: Colony count at 30 degrees C by the surface plating technique |
|||
* ISO 432:1989 Ply type conveyor belts — Characteristics of construction [Withdrawn without replacement] |
|||
* ISO 4848:1980 Concrete — Determination of air content of freshly mixed concrete — Pressure method [Withdrawn: replaced with ISO 1920-2] |
|||
* ISO 433:2017 Conveyor belts — Marking |
|||
* ISO 4858:1982 Wood — Determination of volumetric shrinkage [Withdrawn: replaced with ISO 13061-14] |
|||
* ISO |
* ISO/R 434:1965 Y-section V-belts — Lengths [Withdrawn: replaced by ISO 4184] |
||
* ISO |
* ISO 435:1975 Micrographics — ISO character — Description and use [Withdrawn: replaced by ISO 446] |
||
* ISO/R 436:1965 Informative labelling [Withdrawn without replacement] |
|||
* ISO 4866:2010 Mechanical vibration and shock – Vibration of fixed structures – Guidelines for the measurement of vibrations and evaluation of their effects on structures |
|||
* ISO 437:1982 Steel and cast iron — Determination of total carbon content — Combustion gravimetric method [Withdrawn without replacement] |
|||
* ISO 4871:1996 Acoustics – Declaration and verification of noise emission values of machinery and equipment |
|||
* ISO 438:1980 Paper — Determination of bulking thickness and apparent density [Withdrawn: replaced by ISO 534] |
|||
* [[ISO/IEC 4873]]:1991 Information technology – ISO 8-bit code for information interchange – Structure and rules for implementation |
|||
* ISO 439:2020 Steel and cast iron — Determination of silicon content — Gravimetric method |
|||
* ISO 4875 Metal-cutting band saw blades |
|||
* ISO/R 440:1965 Aircraft — shape, size, and direction of operation of lever controls [Withdrawn without replacement] |
|||
** ISO 4875-1:2006 Part 1: Vocabulary |
|||
* ISO 441:1997 Textile machinery and accessories — Drop wires for warp stop motions for weaving machines without automatic drawing-in |
|||
* ISO 4880:1997 Burning behaviour of textiles and textile products – Vocabulary |
|||
* ISO/R 442:1965 Verification of pendulum impact testing machines for testing steels [Withdrawn without replacement] |
|||
* ISO 4882:1979 Office machines and data processing equipment – Line spacings and character spacings |
|||
* ISO/R 443:1965 Aircraft — Marking of gas cylinders [Withdrawn without replacement] |
|||
* ISO 4885:2017 Ferrous materials – Heat treatments – Vocabulary |
|||
* ISO 444:1981 Phlogopite mica blocks, thins and splittings — Grading by size [Withdrawn without replacement] |
|||
* ISO 4892 Plastics – Methods of exposure to laboratory light sources |
|||
* ISO 445:2013 Pallets for materials handling — Vocabulary |
|||
* ISO 4902:1989 Information technology – Data communication – 37-pole DTE/DCE interface connector and contact number assignments |
|||
* ISO 446:2004 Micrographics — ISO character and ISO test chart No. 1 — Description and use |
|||
* ISO 4903:1989 Information technology – Data communication – 15-pole DTE/DCE interface connector and contact number assignments |
|||
* ISO 447:1984 Machine tools — Direction of operation of controls |
|||
* [[ISO/IEC 4909]]:2006 Identification cards – Financial transaction cards – Magnetic stripe data content for track 3 |
|||
* ISO 448:1981 Gas cylinders for industrial use — Marking for identification of content [Withdrawn without replacement] |
|||
* ISO 4921:2000 Knitting – Basic concepts – Vocabulary |
|||
* ISO 449:1997 Ships and marine technology — Magnetic compasses, binnacles and azimuth reading devices — Class A [Withdrawn: replaced with ISO 25862] |
|||
* ISO 4977 Double cold-reduced electrolytic tinplate |
|||
* ISO 450:1975 Aircraft — Connection for water of drinkable quality [Withdrawn: replaced with ISO 17775] |
|||
* ISO 451:1976 Aircraft — Pressure re-oiling connection |
|||
** ISO 4977-2:1984 Part 2: Coil for subsequent cutting into sheets [Withdrawn: replaced with ISO 11949] |
|||
* ISO/R 452:1965 Essential characteristics of 35 mm microfilm ready apparatus [Withdrawn without replacement] |
|||
* ISO/R 453:1965 Surface active agents — Vocabulary — First list [Withdrawn: replaced with ISO 862] |
|||
* ISO 454:1975 Acoustics — Relation between sound pressure levels of narrow bands of noise in a diffuse field and in a frontally-incident free field for equal loudness [Withdrawn without replacement] |
|||
* ISO/R 455:1965 Analysis of soaps — Determination of total crude fatty acids [Withdrawn: replaced with ISO 685] |
|||
* ISO 456:1973 Surface active agents — Analysis of soaps — Determination of free caustic alkali |
|||
* ISO 457:1983 Soaps — Determination of chloride content — Titrimetric method |
|||
* ISO 458 Plastics — Determination of stiffness in torsion of flexible materials |
|||
** ISO 458-1:1985 Part 1: General method |
|||
** ISO 458-2:1985 Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride |
|||
* ISO/R 459:1962 Narrow V-belts — Grooved pulleys — Groove sections SPZ, SPA, SPB [Withdrawn: replaced with ISO 4183] |
|||
* ISO/R 460:1962 Narrow V-belts — Lengths — Groove sections SPZ, SPA, SPB [Withdrawn: replaced with ISO 4184] |
|||
* ISO 461 Aircraft — Connectors for ground electrical supplies |
|||
** ISO 461-1:2003 Part 1: Design, performance and test requirements |
|||
** ISO 461-2:1985 Part 2: Dimensions |
|||
* ISO/R 462:1965 Plastics — Determination of the change of mechanical properties after contact with chemical substances [Withdrawn: replaced with ISO 175] |
|||
* ISO 463:2006 Geometrical Product Specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of mechanical dial gauges |
|||
* ISO 464:2015 Rolling bearings — Radial bearings with locating snap ring — Dimensions, geometrical product specifications (GPS) and tolerance values |
|||
* ISO/R 465:1965 Rolling bearings — Double row self-aligning roller bearings — Radial internal clearance [Withdrawn: replaced with ISO 5753] |
|||
* ISO 466:1976 Cinematography — Image produced by 16 mm motion-picture camera aperture — Position and dimensions |
|||
* ISO/R 467:1966 Preferred modules and diametral pitches of cylindrical gears for general engineering [Withdrawn without replacement] |
|||
* ISO 468:1982 Surface roughness — Parameters, their values and general rules for specifying requirements [Withdrawn without replacement] |
|||
* ISO/R 469:1966 Aircraft — Conductors for general purpose aircraft electrical cables — Dimensions and characteristics [Withdrawn: replaced with ISO 2635] |
|||
* ISO/R 470:1966 Aircraft — Conductors for heat-resisting aircraft electrical cables — Dimensions and characteristics [Withdrawn: replaced with ISO 2635] |
|||
* ISO 471:1995 Rubber — Temperatures, humidities and times for conditioning and testing [Withdrawn: replaced with ISO 23529] |
|||
* ISO 472:2013 Plastics — Vocabulary |
|||
* ISO 473:2019 Lithopone pigments — General requirements and methods of testing |
|||
* ISO/R 474:1966 Aircraft — Conductors for general purpose aircraft electrical cables — Performance requirements [Withdrawn without replacement] |
|||
* ISO/R 475:1966 Rectangular refractory bricks — Dimensions [Withdrawn: replaced with ISO 5019-1] |
|||
* ISO 476:1982 Textile machinery and accessories — Pirn winding machines — Vocabulary |
|||
* ISO 477:1982 Textile machinery and accessories — Cone and cheese winding machines — Vocabulary |
|||
* ISO 478:1974 Paper — Untrimmed stock sizes for the ISO-A Series — ISO primary range [Withdrawn: replaced with ISO 217] |
|||
* ISO 479:1975 Paper — Untrimmed sizes — Designation and tolerances [Withdrawn: replaced with ISO 217] |
|||
* ISO/R 480:1966 Perforated metal cheese centres for bast fibre yearns [Withdrawn without replacement] |
|||
* ISO 481:1977 Textile machinery and accessories — Warper's beams — Terminology and main dimensions [Withdrawn: replaced with ISO 8116-2] |
|||
* ISO 482:1977 Aircraft — Propulsion units and components — Methods of numbering and describing direction of rotation [Withdrawn without replacement] |
|||
* ISO 483:2005 Plastics — Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value |
|||
* ISO 484 Shipbuilding — Ship screw propellers — Manufacturing tolerances |
|||
** ISO 484-1:2015 Part 1: Propellers of diameter greater than 2,50 m |
|||
** ISO 484-2:2015 Part 2: Propellers of diameter between 0,80 and 2,50 m inclusive |
|||
* ISO 485:1973 Aircraft water-methanol pressure connections |
|||
* ISO 486:1988 Cinematography — 16 mm motion-picture film perforated 8 mm Type R — Cutting and perforating dimensions |
|||
* ISO 487:1998 Steel roller chains, types S and C, attachments and sprockets |
|||
* ISO 488:2008 Milk — Determination of fat content — Gerber butyrometers [Withdrawn: replaced with ISO 19662] |
|||
* ISO 489:1999 Plastics — Determination of refractive index |
|||
* ISO 490:1993 Cinematography — Magnetic stripes and magnetic recording head gaps for sound record on 16 mm motion-picture film perforated along one edge (Type 1) — Positions and width dimensions |
|||
* ISO 491:2002 Cinematography — 35 mm motion-picture film and magnetic film — Cutting and perforating dimensions |
|||
* ISO 492:2014 Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values |
|||
* ISO 493:1975 Aircraft — Dimensions for single-hole mounting (Class 1 and Class 2) lever-operated manual switches |
|||
* ISO 494:2017 Cylindrical shank twist drills — Long series |
|||
* ISO 495:1966 Acoustics — Determination of sound power levels of noise sources [Withdrawn: replaced with ISO 3740, ISO 3741, ISO 3742, ISO 3743, ISO 3744, ISO 3745, and ISO 3746] |
|||
* ISO 496:1973 Driving and driven machines — Shaft heights [Withdrawn without replacement] |
|||
* [[ISO 497]]:1973 Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers |
|||
* ISO 498:1992 Natural rubber latex concentrate — Preparation of dry films |
|||
* ISO/R 499:1966 Paper — Internal diameters of cores of reels [Withdrawn without replacement] |
|||
== ISO 500 – ISO 699 == |
|||
* [[ISO 500]] Agricultural tractors — Rear-mounted power take-off types 1, 2, 3 and 4<ref name=VariesBetweenParts group=Note /> |
|||
* ISO 501:2012 Hard coal — Determination of the crucible swelling number |
|||
* ISO 502:2015 Coal — Determination of caking power — Gray-King coke test |
|||
* ISO/R 503:1966 Wrought magnesium-aluminium-zinc alloys — Chemical composition [Withdrawn: replaced with ISO 3116] |
|||
* ISO 504:1975 Turning tools with carbide tips — Designation and marking |
|||
* ISO 505:2017 Conveyor belts — Method for the determination of the tear propagation resistance of textile conveyor belts |
|||
* ISO 506:2020 Rubber latex, natural, concentrate — Determination of volatile fatty acid number |
|||
* ISO/R 507:1970 Acoustics — Procedure for describing aircraft noise heard on the ground using frequency weighting [Withdrawn: replaced with ISO 3891] |
|||
* ISO/R 508:1966 Ships and marine technology — Identification colours for the content of piping systems [Withdrawn: replaced with ISO 14726-1, now ISO 14726] |
|||
* ISO 509:1996 Pallet trucks — Principal dimensions [Withdrawn without replacement] |
|||
* ISO 510:1977 Red lead for paints |
|||
* ISO 511:1977 White lead pigments for paints [Withdrawn without replacement] |
|||
* ISO 512:1979 Road vehicles — Sound signalling devices — Technical specifications [Withdrawn without replacement] |
|||
* ISO 513:2012 Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application |
|||
* ISO 514:2014 Turning tools with carbide tips — Internal tools |
|||
* ISO 515:1973 Photography — Stereo systems using 35 mm objectives on 35 mm film, five-perforation format — Specifications [Withdrawn without replacement] |
|||
* ISO 516:2019 Camera shutters — Timing — General definition and mechanical shutter measurements |
|||
* ISO 517:2008 Photography — Apertures and related properties pertaining to photographic lenses — Designations and measurements |
|||
* [[ISO 518]]:2006 Photography — Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units — Specification |
|||
* [[ISO 519]]:1992 Photography — Hand-held cameras — Flash-connector dimensions |
|||
* ISO 520:2010 Cereals and pulses — Determination of the mass of 1 000 grains |
|||
* ISO 521:2011 Machine chucking reamers with cylindrical shanks and Morse taper shanks |
|||
* ISO 522:1975 Special tolerances for reamers |
|||
* ISO 523:1974 Milling cutters — Recommended range of outside diameters [Withdrawn without replacement] |
|||
* ISO/R 524:1966 Hard metal wire drawing dies — Interchangeability dimensions of pellets and cases [Withdrawn without replacement] |
|||
* ISO 525:2020 Bonded abrasive products — Shape types, designation and marking |
|||
* ISO/R 526:1966 Significance to purchasers of marks indicating conformitity with standards [Withdrawn without replacement] |
|||
* ISO 527 Plastics — Determination of tensile properties |
|||
** ISO 527-1:2019 Part 1: General principles |
|||
** ISO 527-2:2012 Part 2: Test conditions for moulding and extrusion plastics |
|||
** ISO 527-3:2018 Part 3: Test conditions for films and sheets |
|||
** ISO 527-4:2021 Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
|||
** ISO 527-5:2009 Part 5: Test conditions for unidirectional fibre-reinforced plastic composites |
|||
* ISO 528:1983 Refractory products — Determination of pyrometric cone equivalent (refractoriness) |
|||
* ISO 529:2017 Short machine taps and hand taps |
|||
* ISO 530:1975 Aircraft — General purpose push-pull single-pole circuit-breakers — Dimensions |
|||
* ISO/R 531:1966 Cast iron sanitary pipes and fittings for waste water and ventilation [Withdrawn without replacement] |
|||
* ISO 532 Acoustics — Methods for calculating loudness |
|||
** ISO 532-1:2017 Part 1: Zwicker method |
|||
** ISO 532-2:2017 Part 2: Moore-Glasberg method |
|||
* ISO/R 533:1966 Rolling bearings — Double row cylindrical roller bearings type with tapered bore 1:12 [Withdrawn without replacement] |
|||
* ISO 534:2011 Paper and board — Determination of thickness, density and specific volume |
|||
* ISO 535:2014 Paper and board — Determination of water absorptiveness — Cobb method |
|||
* ISO 536:2019 Paper and board — Determination of [[grammage]] |
|||
* ISO 537:1989 Plastics — Testing with the torsion pendulum [Withdrawn: replaced with ISO 6721-1, ISO 6721-2, ISO 6721-4, and ISO 6721-10] |
|||
* ISO/R 538:1967 Conventional signs to be used in the schemes for the installations of pipeline systems in ships [Withdrawn without replacement] |
|||
* ISO/R 539:1967 Acoustics — Dimensions and conductor resistance of heat-resisting (260°C) electrical cables with copper conductors [Withdrawn without replacement] |
|||
* ISO 540:2008 Hard coal and coke — Determination of ash fusibility |
|||
* ISO/R 541:1967 Measurement of fluid flow by means of orifice plates and nozzles [Withdrawn: replaced with ISO 5167, later ISO 5167-1] |
|||
* ISO 542:1990 Oilseeds — Sampling [Withdrawn: replaced with ISO 21294] |
|||
* ISO 543:1990 Photography — Photographic films — Specifications for safety film [Withdrawn: replaced with ISO 18906] |
|||
* ISO 544:2017 Welding consumables — Technical delivery conditions for filler materials and fluxes — Type of product, dimensions, tolerances and markings |
|||
* ISO 545:1975 Filler rods, other than drawn or extruded, for welding — Lengths and tolerance [Withdrawn: replaced with ISO 544] |
|||
* ISO 546:1975 Drawn or extruded filler rods for welding, supplied in straight lengths — Lengths and tolerance [Withdrawn: replaced with ISO 544] |
|||
* ISO 547:1975 Electrodes for the welding of mild steel and low alloy high tensile steel — Lengths and tolerance [Withdrawn: replaced with ISO 544] |
|||
* ISO 548:1981 Manganese ores — Determination of barium oxide content — Barium sulphate gravimetric method |
|||
* ISO 549:1981 Manganese ores — Determination of combined water content — Gravimetric method |
|||
* ISO 550:1981 Manganese ores — Determination of titanium content [Withdrawn: replaced with ISO 7723] |
|||
* ISO 551:1975 Manganese ores — Determination of zinc content — Zinc mercurithyocyanate gravimetric method [Withdrawn without replacement] |
|||
* ISO 552:1975 Manganese ores and concentrates — Determination of calcium and magnesium contents [Withdrawn: replaced with ISO 6233] |
|||
* ISO 553:1981 Manganese ores — Determination of vanadium content — Titrimetric method and phosphotungstovanadate photometric method [Withdrawn without replacement] |
|||
* ISO 554:1976 Standard atmospheres for conditioning and/or testing — Specifications |
|||
* ISO 555 Liquid flow measurement in open channels — Dilution methods for measurement of steady flow |
|||
** ISO 555-1:1973 Liquid flow measurement in open channels — Dilution methods for measurement of steady flow — Part 1: Constant-rate injection method [Withdrawn without replacement] |
|||
** ISO 555-2:1987 Liquid flow measurement in open channels — Dilution methods for the measurement of steady flow — Part 2: Integration method [Withdrawn without replacement] |
|||
* ISO 556:2020 Coke (greater than 20 mm in size) — Determination of mechanical strength |
|||
* ISO/R 557:1967 Safety Signs [Withdrawn: replaced with ISO 3864-1] |
|||
* ISO 558:1980 Conditioning and testing — Standard atmospheres — Definitions |
|||
* ISO 559:1991 Steel tubes for water and sewage [Withdrawn without replacement] |
|||
* ISO 560:1975 Cold drawn precision steel tubes — Metric series — Dimensions and masses per metre [Withdrawn: replaced with ISO 4200] |
|||
* ISO 561:1989 Coal preparation plant — Graphical symbols |
|||
* ISO 562:2010 Hard coal and coke — Determination of volatile matter |
|||
* ISO 563:1981 Equipment for harvesting — Knife sections for agricultural cutter bars [Withdrawn without replacement] |
|||
* ISO/R 564:1967 Aerospace — Preformed flexible steel wire rope for aircraft controls — Dimensions and loads [Withdrawn: replaced with ISO 2020, later ISO 2020-1] |
|||
* ISO 565:1990 Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings |
|||
* ISO/R 566:1967 Pesticides — Common names — Sixth series of terms [Withdrawn: replaced with ISO 1750] |
|||
* ISO 567:1995 Coke — Determination of bulk density in a small container |
|||
* ISO 568:1976 Textile machinery and accessories — Heald frames for single or double row of healds — Designation of dimensions [Withdrawn: replaced with ISO 10787-1 and ISO 10787-2] |
|||
* ISO 569:1982 Textile machinery and accessories — Heald frames — Co-ordinated dimensions in relation to the pitch of the harness [Withdrawn: replaced with ISO 10787-1 and ISO 10787-2] |
|||
* ISO 570:1982 Textile machinery and accessories — Heald carrying rods for healds with closed O-shaped end loops |
|||
* ISO 571:1976 Textile machinery and accessories — Metal reeds with double-spring baulk — Dimensions [Withdrawn: Replaced with ISO 366-3] |
|||
* ISO 572:1976 Textile machinery and accessories — Shuttles for pirn changing automatic looms — Dimensions [Withdrawn without replacement] |
|||
* ISO 573:1976 Textile machinery and accessories — Dobby lags and pegs in wood, metal or other suitable material — Dimensions [Withdrawn without replacement] |
|||
* ISO 574:1979 Textile machinery and accessories — Perforated cylindrical tubes for cheese dyeing [Withdrawn: Replaced with ISO 3914-7] |
|||
* ISO 575:1978 Textile machinery and accessories — Transfer cones — Half angle of the cone 4 degrees 20' [Withdrawn without replacement] |
|||
* ISO 576:1976 Textile machinery and accessories — Paper patterns for dobbies — Dimensions [Withdrawn without replacement] |
|||
* ISO/R 577 Rolling bearings — Tapered rolling bearings — Metric series — Tolerances |
|||
** ISO/R 577-1:1967 Rolling bearings — Tapered rolling bearings — Metric series — Tolerances — Part 1: Normal tolerances [Withdrawn: Replaced with ISO 492] |
|||
** ISO/R 577-2:1968 Rolling bearings — Tapered rolling bearings — Metric series — Tolerances — Part 2: Tolerances classes 6 and 5 [Withdrawn: Replaced with ISO 492] |
|||
** ISO 577-3:1973 Rolling bearings — Tapered rolling bearings — Metric series — Tolerances — Part 3: Tolerances classes 4 [Withdrawn: Replaced with ISO 492] |
|||
* ISO 578:1987 Tapered roller bearings — Inch series — Tolerances [Withdrawn without replacement] |
|||
* ISO 579:2013 Coke — Determination of total moisture |
|||
* ISO 580:2005 Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating |
|||
* ISO/TR 581:2005 Weldability — Metallic materials — General principles |
|||
* ISO 582:1995 Rolling bearings — Chamfer dimensions — Maximum values |
|||
* ISO 583:2007 Conveyor belts with a textile carcass — Total belt thickness and thickness of constitutive elements — Test methods |
|||
* ISO 584:1982 Plastics — Unsaturated polyester resins — Determination of reactivity at 80 degrees C (conventional method) |
|||
* ISO 585:1990 Plastics — Unplasticized cellulose acetate — Determination of moisture content |
|||
* ISO/R 586:1967 Coke — Determination of ash [Withdrawn: replaced with ISO 1171] |
|||
* ISO 587:2020 Coal and coke — Determination of chlorine using Eschka mixture |
|||
* ISO/R 588 was incorporated into ISO/R 862<ref>[https://www.govinfo.gov/content/pkg/GOVPUB-C13-59e1dce9a007f7c11f9df0d0a16cca55/pdf/GOVPUB-C13-59e1dce9a007f7c11f9df0d0a16cca55.pdf U.S. Metric Study Interim Report] (1971). Department of Commerce, National Bureau of Standards.</ref> |
|||
* ISO 589:2008 Hard coal — Determination of total moisture |
|||
* ISO 590:1981 Oil of brazilian sassafras [Withdrawn without replacement] |
|||
* ISO 591 Titanium dioxide pigments for paints |
|||
** ISO 591-1:2000 Part 1: Specifications and methods of test |
|||
* ISO 592:1998 Essential oils — Determination of optical rotation |
|||
* ISO 593:1974 Paper — Untrimmed stock sizes for the ISO-A Series — ISO supplementary range [Withdrawn: replaced with ISO 217] |
|||
* ISO 594 Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment |
|||
**ISO 594-1:1986 Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment — Part 1: General requirements [Withdrawn: replaced with ISO 80369-7] |
|||
**ISO 594-2:1998 Conical fittings with 6 % (Luer) taper for syringes, needles and certain other medical equipment — Part 2: Lock fittings [Withdrawn: replaced with ISO 80369-7] |
|||
* ISO 595 Reusable all-glass or metal-and-glass syringes for medical use [Withdrawn without replacement] |
|||
**ISO 595-1:1986 Reusable all-glass or metal-and-glass syringes for medical use — Part 1: Dimensions [Withdrawn without replacement] |
|||
**ISO 595-2:1987 Reusable all-glass or metal-and-glass syringes for medical use — Part 2: Design, performance requirements and tests [Withdrawn without replacement] |
|||
* ISO/R 596:1967 Hypodermic needles [Withdrawn without replacement] |
|||
* ISO/R 597:1967 Definitions and terminology of cements [Withdrawn without replacement] |
|||
* ISO/R 598:1967 Fundamental welding positions — Definitions and values of angles of slope and rotation for fillet welds for these positions [Withdrawn: replaced by ISO 6947] |
|||
* ISO 599:1985 Plastics — Polyamide homopolymers — Determination of matter extractable by boiling methanol [Withdrawn: replaced by ISO 6427] |
|||
* ISO/R 600:1967 Plastics — Polyamide homopolymers — Determination of the viscosity ratio in concentrated solution [Withdrawn without replacement] |
|||
* ISO 601:1981 Solid mineral fuels — Determination of arsenic content using the standard silver diethyldithiocarbamate photometric method of ISO 2590 [Withdrawn without replacement] |
|||
* ISO 602:2015 Coal — Determination of mineral matter |
|||
* ISO 603 Bonded abrasive products — Dimensions |
|||
** ISO 603-1:1999 Part 1: Grinding wheels for external cylindrical grinding between centres |
|||
** ISO 603-2:1999 Part 2: Grinding wheels for centreless external cylindrical grinding |
|||
** ISO 603-3:1999 Part 3: Grinding wheels for internal cylindrical grinding |
|||
** ISO 603-4:1999 Part 4: Grinding wheels for surface grinding/peripheral grinding |
|||
** ISO 603-5:1999 Part 5: Grinding wheels for surface grinding/face grinding |
|||
** ISO 603-6:1999 Part 6: Grinding wheels for tool and tool room grinding |
|||
** ISO 603-7:1999 Part 7: Grinding wheels for manually guided grinding |
|||
** ISO 603-8:1999 Part 8: Grinding wheels for deburring and fettling/snagging |
|||
** ISO 603-9:1999 Part 9: Grinding wheels for high-pressure grinding |
|||
** ISO 603-10:1999 Part 10: Stones for honing and superfinishings |
|||
** ISO 603-11:1999 Part 11: Hand finishing sticks |
|||
** ISO 603-12:1999 Part 12: Grinding wheels for deburring and fettling on a straight grinder |
|||
** ISO 603-13:1999 Part 13: Grinding wheels for deburring and fettling on a vertical grinder |
|||
** ISO 603-14:1999 Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder |
|||
** ISO 603-15:1999 Part 15: Grinding wheels for cutting-off on stationary or mobile cutting-off machines |
|||
** ISO 603-16:1999 Part 16: Grinding wheels for cutting-off on hand held power tools |
|||
** ISO 603-17:2014 Part 17: Spindle mounted wheels (ISO type 52) |
|||
** ISO 603-18:2013 Part 18: Grinding wheels for flat glass edge grinding machines |
|||
* ISO 604:2002 Plastics — Determination of compressive properties |
|||
* ISO 605:1991 Pulses — Determination of impurities, size, foreign odours, insects, and species and variety — Test methods |
|||
* ISO 606:2015 Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets |
|||
* ISO 607:1980 Surface active agents and detergents — Methods of sample division |
|||
* ISO/R 608:1967 Classical V-belts — Lengths (sections A, B, C, D, and E) [Withdrawn: replaced with ISO 4184] |
|||
* ISO 609:1996 Solid mineral fuels — Determination of carbon and hydrogen — High temperature combustion method |
|||
* ISO 610:1990 High-tensile steel chains (round link) for chain conveyors and coal ploughs |
|||
* ISO 611:2003 Road vehicles — Braking of automotive vehicles and their trailers — Vocabulary |
|||
* ISO 612:1978 Road vehicles — Dimensions of motor vehicles and towed vehicles — Terms and definitions |
|||
* ISO 613:2000 Ships and marine technology — Magnetic compasses, binnacles and azimuth reading devices — Class B [Withdrawn: replaced by ISO 25862] |
|||
* ISO 614:2012 Ships and marine technology — Toughened safety glass panes for rectangular windows and side scuttles — Punch method of non-destructive strength testing |
|||
* ISO/R 615:1967 Methods for determining the mechanical properties of the weld metal deposited by electrodes 3,15 mm or more in diameter [Withdrawn without replacement] |
|||
* ISO 616:1995 Coke — Determination of shatter indices |
|||
* ISO/R 617:1967 Calculation of rectangular symmetrical fillet welds statically loaded in such a way that the transverse section is not under any normal stress [Withdrawn without replacement] |
|||
* ISO 618:1974 Paper — Articles of stationery that include detachable sheets — Overall trimmed sizes [Withdrawn without replacement] |
|||
* ISO 619:1981 Manganese ores — Determination of chromium content — Diphenylcarbazide photometric method and silver persulphate titrimetric method |
|||
* ISO 620:1975 Manganese ores — Determination of zinc content — Polarographic method (zinc content between 0,005 and 0,1 %) [Withdrawn without replacement] |
|||
* ISO 621:1981 Manganese ores — Determination of metallic iron content (metallic iron content not exceeding 2 %) — Sulphosalicylic acid photometric method [Withdrawn without replacement] |
|||
* ISO 622:2016 Solid mineral fuels — Determination of phosphorus content — Reduced molybdophosphate photometric method |
|||
* ISO 623:1974 Paper and board — Folders and files — Sizes [Withdrawn without replacement] |
|||
* ISO 624:1974 Pulps — Determination of dichloromethane soluble matter [Withdrawn: replaced with ISO 14453] |
|||
* ISO 625:1996 Solid mineral fuels — Determination of carbon and hydrogen — Liebig method |
|||
* ISO/R 626:1967 Strength calculation of butt welded joints [Withdrawn without replacement] |
|||
* ISO/R 627:1967 Fundamental welding positions — Definitions and values of angles of slope and rotation for butt welds for these positions [Withdrawn: replaced by ISO 6947] |
|||
* ISO/R 628:1967 Pesticides — Common names — Seventh series of terms [Withdrawn: replaced with ISO 1750] |
|||
* ISO 629:1982 Steel and cast iron — Determination of manganese content — Spectrophotometric method |
|||
* ISO 630 Structural steels |
|||
** ISO 630-1:2011 Part 1: General technical delivery conditions for hot-rolled products |
|||
** ISO 630-2:2011 Part 2: Technical delivery conditions for structural steels for general purposes |
|||
** ISO 630-3:2012 Part 3: Technical delivery conditions for fine-grain structural steels |
|||
** ISO 630-4:2012 Part 4: Technical delivery conditions for high-yield-strength quenched and tempered structural steel plates |
|||
** ISO 630-5:2014 Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance |
|||
** ISO 630-6:2014 Part 6: Technical delivery conditions for seismic-improved structural steels for building |
|||
* ISO 631:1975 Mosaic parquet panels — General characteristics |
|||
* ISO/R 632:1967 Methods of test for determining whether an electrode is a deep penetration electrode [Withdrawn without replacement] |
|||
* ISO 633:2019 Cork — Vocabulary |
|||
* ISO/R 634:1967 Aircraft — Methods of test for general purpose electrical cables with copper conductors [Withdrawn without replacement] |
|||
* ISO/R 635:1967 Welding consumables — Code of symbols for covered electrodes for arc welding of mild steels and low alloy high tensile steels [Withdrawn without replacement] |
|||
* ISO 636:2017 Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification |
|||
* ISO 637:1975 Filler rods for gas welding of mild steels and low alloy high tensile steels — Determination of mechanical properties of deposited weld metal [Withdrawn without replacement] |
|||
* ISO 638 Paper, board, pulps and cellulosic nanomaterials — Determination of dry matter content by oven-drying method |
|||
** ISO 638-1:2021 Part 1: Materials in solid form |
|||
** ISO 638-2:2021 Part 2: Suspensions of cellulosic nanomaterials |
|||
* [[ISO 639]] Codes for the representation of names of languages |
|||
** [[ISO 639-1]]:2002 Part 1: Alpha-2 code |
|||
** [[ISO 639-2]]:1998 Part 2: Alpha-3 code |
|||
** [[ISO 639-3]]:2007 Part 3: Alpha-3 code for comprehensive coverage of languages |
|||
** ISO 639-4:2010 Part 4: General principles of coding of the representation of names of languages and related entities, and application guidelines |
|||
** [[ISO 639-5]]:2008 Part 5: Alpha-3 code for language families and groups |
|||
** [[ISO 639-6]]:2009 Part 6: Alpha-4 code for comprehensive coverage of language variants [Withdrawn, no replacement] |
|||
* ISO 640:1984 Metallic materials — Hardness test — Calibration of standardized blocks to be used for Vickers hardness testing machines HV 0,2 to HV 100 [Withdrawn: replaced with ISO 6507-3] |
|||
** ISO 640-2:1993 Metallic materials — Calibration of standardized blocks to be used for Vickers hardness testing machines — Part 2: Less than HV 0,2 [Withdrawn: replaced with ISO 6507-3] |
|||
* ISO 641:1975 Laboratory glassware — Interchangeable spherical ground joints |
|||
* ISO 642:1999 Steel — Hardenability test by end quenching (Jominy test) |
|||
* ISO 643:2019 Steels — Micrographic determination of the apparent grain size |
|||
* ISO/R 644:1967 Conventional signs to be used in schemes for the installations of ventilation systems in ships [Withdrawn without replacement] |
|||
* ISO/R 645:1967 Statistics — Vocabulary and symbols — First series [Withdrawn: replaced with ISO 3534] |
|||
* [[ISO/IEC 646]]:1991 Information technology — ISO 7-bit coded character set for information interchange |
|||
* ISO 647:2017 Brown coals and lignites — Determination of the yields of tar, water, gas and coke residue by low temperature distillation |
|||
* ISO 648:2008 Laboratory glassware — Single-volume pipettes |
|||
* ISO 649 Laboratory glassware — Density hydrometers for general purposes |
|||
** ISO 649-1:1981 Part 1: Specification |
|||
** ISO 649-2:1981 Part 2: Test methods and use |
|||
* ISO 650:1977 Relative density 60/60 degrees F hydrometers for general purposes |
|||
* ISO 651:1975 Solid-stem calorimeter thermometers [Withdrawn without replacement] |
|||
* ISO 652:1975 Enclosed-scale calorimeter thermometers [Withdrawn without replacement] |
|||
* ISO 653:1980 Long solid-stem thermometers for precision use [Withdrawn without replacement] |
|||
* ISO 654:1980 Short solid-stem thermometers for precision use [Withdrawn without replacement] |
|||
* ISO 655:1980 Long enclosed-scale thermometers for precision use [Withdrawn without replacement] |
|||
* ISO 656:1980 Short enclosed-scale thermometers for precision use [Withdrawn without replacement] |
|||
* [[ISO 657]] Hot-rolled steel sections |
|||
* ISO 658:2002 Oilseeds — Determination of content of impurities |
|||
* ISO 659:2009 Oilseeds — Determination of oil content (Reference method) |
|||
* ISO 660:2020 Animal and vegetable fats and oils — Determination of acid value and acidity |
|||
* ISO 661:2003 Animal and vegetable fats and oils — Preparation of test sample |
|||
* ISO 662:2016 Animal and vegetable fats and oils — Determination of moisture and volatile matter content |
|||
* ISO 663:2017 Animal and vegetable fats and oils — Determination of insoluble impurities content |
|||
* ISO 664:2008 Oilseeds — Reduction of laboratory sample to test sample |
|||
* ISO 665:2020 Oilseeds — Determination of moisture and volatile matter content |
|||
* ISO 666:2012 Machine tools — Mounting of grinding wheels by means of hub flanges |
|||
* ISO 667:1981 Rubber, compounded — Determination of cure rate — Shearing disk method [Withdrawn: replaced with ISO 289-2] |
|||
* [[ISO 668]]:2020 Series 1 freight containers — Classification, dimensions and ratings |
|||
* ISO 669:2016 Resistance welding — Resistance welding equipment — Mechanical and electrical requirements |
|||
* ISO/R 670:1968 Straight resistance spot welding electrodes — Mechanical and electrical requirements [Withdrawn: replaced with ISO 5184] |
|||
* ISO 671:1982 Steel and cast iron — Determination of sulphur content — Combustion titrimetric method |
|||
* ISO 672:1978 Soaps — Determination of moisture and volatile matter content — Oven method |
|||
* ISO 673:1981 Soaps — Determination of content of ethanol-insoluble matter |
|||
* ISO 674:1988 Metallic materials — Hardness test — Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A – B – C – D – E – F – G – H – K) [Withdrawn: replaced with ISO 6508-3] |
|||
* ISO 675:2014 Textiles — Woven fabrics — Determination of dimensional change on commercial laundering near the boiling point |
|||
* ISO 676:1995 Spices and condiments — Botanical nomenclature |
|||
* ISO 677:1976 Straight bevel gears for general engineering and heavy engineering — Basic rack |
|||
* ISO 678:1976 Straight bevel gears for general engineering and heavy engineering — Modules and diametral pitches |
|||
* ISO 679:2009 Cement — Test methods — Determination of strength |
|||
* ISO 680:1990 Cement — Test methods — Chemical analysis [Withdrawn: replaced with ISO 29581-1] |
|||
* ISO/R 681:1968 Chemical analysis of cements — Minor constituents of Portland cement [Withdrawn without replacement] |
|||
* ISO/R 682:1968 Chemical analysis of cements — Determination of sulphur as sulphide [Withdrawn without replacement] |
|||
* ISO 683 Heat-treatable steels, alloy steels and free-cutting steels |
|||
** ISO 683-1:2016 Part 1: Non-alloy steels for quenching and tempering |
|||
** ISO 683-2:2016 Part 2: Alloy steels for quenching and tempering |
|||
** ISO 683-3:2022 Part 3: Case-hardening steels |
|||
** ISO 683-4:2016 Part 4: Free-cutting steels |
|||
** ISO 683-5:2017 Part 5: Nitriding steels |
|||
** ISO 683-14:2004 Part 14: Hot-rolled steels for quenched and tempered springs |
|||
** ISO 683-15:1992 Part 15: Valve steels for internal combustion engines |
|||
** ISO 683-17:2014 Part 17: Ball and roller bearing steels |
|||
** ISO 683-18:2014 Part 18: Bright steel products |
|||
* ISO 684:1974 Analysis of soaps — Determination of total free alkali |
|||
* ISO 685:2020 Analysis of soaps — Determination of total alkali content and total fatty matter content |
|||
* ISO 686:1985 Photography — 35 mm filmstrips — Specifications for double-frame and single-frame formats [Withdrawn without replacement] |
|||
* ISO 687:2010 Solid mineral fuels — Coke — Determination of moisture in the general analysis test sample |
|||
* ISO 688:1975 Filler rods for braze welding — Determination of characteristics of deposited metal [Withdrawn without replacement] |
|||
* ISO 689:1975 Microcopying — ISO micromire — Description and use for checking a reading apparatus [Withdrawn without replacement] |
|||
* [[ISO 690]]:2010 Information and documentation — Guidelines for bibliographic references and citations to information resources |
|||
* ISO 691:2005 Assembly tools for screws and nuts — Wrench and socket openings — Tolerances for general use |
|||
* ISO 692:1982 Pulps — Determination of alkali solubility |
|||
* ISO 693:1982 Dimensions of seam welding wheel blanks |
|||
* ISO 694:2000 Ships and marine technology — Positioning of magnetic compasses in ships [Withdrawn: replaced by ISO 25862] |
|||
* ISO 695:1991 Glass — Resistance to attack by a boiling aqueous solution of mixed alkali — Method of test and classification |
|||
* ISO 696:1975 Surface active agents — Measurement of foaming power — Modified Ross-Miles method |
|||
* ISO 697:1981 Surface active agents — Washing powders — Determination of apparent density — Method by measuring the mass of a given volume |
|||
* ISO 698:1975 Filler rods for braze welding — Determination of conventional bond strength on steel, cast iron and other metals [Withdrawn without replacement] |
|||
* ISO 699:2015 Pulps — Determination of alkali resistance |
|||
== ISO 700 – ISO 999 == |
|||
* ISO 700:1982 Power sources for manual metal arc welding with covered electrodes and for the TIG process [Withdrawn: replaced by IEC 60974-1:1998, now withdrawn without replacement] |
|||
* ISO 701:1998 International gear notation — Symbols for geometrical data |
|||
* ISO 702 Machine tools — Connecting dimensions of spindle noses and work holding chucks |
|||
** ISO 702-1:2009 Part 1: Conical connection |
|||
** ISO 702-2:2007 Part 2: Camlock type |
|||
** ISO 702-3:2007 Part 3: Bayonet type |
|||
** ISO 702-4:2004 Part 4: Cylindrical connection |
|||
* ISO 703:2017 Conveyor belts — Transverse flexibility (troughability) — Test method |
|||
* [[ISO 704]]:2009 Terminology work — Principles and methods |
|||
* ISO 705:2015 Rubber latex — Determination of density between 5 degrees C and 40 degrees C |
|||
* ISO 706:2004 Rubber latex — Determination of coagulum content (sieve residue) |
|||
* ISO 707:2008 Milk and milk products — Guidance on sampling |
|||
* ISO/R 708:1968 Filler rods for gas welding — Test to determine the compatibility of steel filler rods and the parent metal in the welding of steels [Withdrawn without replacement] |
|||
* ISO 709:2001 Essential oils — Determination of ester value |
|||
* ISO 710 Graphical symbols for use on detailed maps, plans and geological cross-sections |
|||
** ISO 710-1:1974 Part 1: General rules of representation |
|||
** ISO 710-2:1974 Part 2: Representation of sedimentary rocks |
|||
** ISO 710-3:1974 Part 3: Representation of magmatic rocks |
|||
** ISO 710-4:1982 Part 4: Representation of metamorphic rocks |
|||
** ISO 710-5:1989 Part 5: Representation of minerals |
|||
** ISO 710-6:1984 Part 6: Representation of contact rocks and rocks which have undergone metasomatic, pneumatolytic or hydrothermal transformation or transformation by weathering |
|||
** ISO 710-7:1984 Part 7: Tectonic symbols |
|||
* ISO 711:1985 Cereals and cereal products — Determination of moisture content (Basic reference method) [Withdrawn without replacement] |
|||
* ISO 712:2009 Cereals and cereal products — Determination of moisture content — Reference method |
|||
* ISO 713:1975 Zinc — Determination of lead and cadmium contents — Polarographic method [Withdrawn without replacement] |
|||
* ISO 714:1975 Zinc — Determination of iron content — Photometric method |
|||
* ISO 715:1975 Zinc — Determination of lead content — Polarographic method [Withdrawn without replacement] |
|||
* ISO 716:1986 Metallic materials — Hardness test — Verification of Rockwell hardness testing machines (scales A – B – C – D – E – F – G – H – K) [Withdrawn: replaced with ISO 6508-2] |
|||
* ISO 717 Acoustics — Rating of sound insulation in buildings and of building elements |
|||
** ISO 717-1:2020 Part 1: Airborne sound insulation |
|||
** ISO 717-2:2020 Part 2: Impact sound insulation |
|||
* ISO 718:1990 Laboratory glassware — Thermal shock and thermal shock endurance — Test methods |
|||
* ISO 719:2020 Glass — Hydrolytic resistance of glass grains at 98 °C — Method of test and classification |
|||
* ISO 720:2020 Glass — Hydrolytic resistance of glass grains at 121 °C — Method of test and classification |
|||
* ISO 721:1991 Rock drilling equipment — Integral stems |
|||
* ISO 722:1991 Rock drilling equipment — Hollow drill steels in bar form, hexagonal and round |
|||
* ISO 723:1991 Rock drilling equipment — Forged collared shanks and corresponding chuck bushings for hollow hexagonal drill steels |
|||
* ISO 724:1993 ISO general-purpose metric screw threads — Basic dimensions |
|||
* ISO 725:2009 ISO inch screw threads — Basic dimensions |
|||
* ISO 726:1982 Metallic materials — Hardness test — Calibration of standardized blocks to be used for Brinell hardness testing machines [Withdrawn: replaced with ISO 6506-3] |
|||
* ISO 727 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or [[acrylonitrile]]/butadiene/styrene (ABS) with plain sockets for pipes under pressure |
|||
** ISO 727-1:2002 Part 1: Metric series |
|||
** ISO 727-2:2005 Part 2: Inch-based series |
|||
* ISO 728:2021 Coke — Size analysis by sieving |
|||
* ISO 729:1988 Oilseeds — Determination of acidity of oils |
|||
* ISO 730:2009 Agricultural wheeled tractors — Rear-mounted three-point linkage — Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4 |
|||
* ISO 731 Formic acid for industrial use — Methods of test |
|||
** ISO 731-1:1977 Formic acid for industrial use — Methods of test — Part 1: General [Withdrawn without replacement] |
|||
** ISO 731-2:1977 Formic acid for industrial use — Methods of test — Part 2: Determination of total acidity — Titrimetric method [Withdrawn without replacement] |
|||
** ISO 731-3:1977 Formic acid for industrial use — Methods of test — Part 3: Determination of content of other acids — Potentiometric method [Withdrawn without replacement] |
|||
** ISO 731-4:1977 Formic acid for industrial use — Methods of test — Part 4: Visual limit test for inorganic chlorides [Withdrawn without replacement] |
|||
** ISO 731-5:1977 Formic acid for industrial use — Methods of test — Part 5: Visual limit test for inorganic sulphates [Withdrawn without replacement] |
|||
** ISO 731-6:1977 Formic acid for industrial use — Methods of test — Part 6: Determination of iron content — 2,2'- Bipyridyl photometric method [Withdrawn without replacement] |
|||
** ISO 731-7:1977 Formic acid for industrial use — Methods of test — Part 7: Determination of low contents of other volatile acids — Titrimetric method after distillation [Withdrawn without replacement] |
|||
* [[ISO 732]]:2000 Photography — 120-size and 220-size films — Dimensions |
|||
* ISO/R 733:1968 Hexagon bolts and nuts — Metric series — Tolerances on widths across flats, widths across corners [Withdrawn: replaced with ISO 4759-1] |
|||
* ISO 734:2015 Oilseed meals — Determination of oil content — Extraction method with hexane (or light petroleum) |
|||
* ISO 735:1977 Oilseed residues — Determination of ash insoluble in [[hydrochloric acid]] |
|||
* ISO 736:1977 Oilseed residues — Determination of diethyl ether extract [Withdrawn without replacement] |
|||
* ISO 737:1975 Coniferous sawn timber — Sizes — Methods of measurement |
|||
* ISO 738:2015 Coniferous sawn timber — Sizes — Permissible deviations and shrinkage [Withdrawn without replacement] |
|||
* ISO 739:1976 Sodium carbonate for industrial use — Preparation and storage of test samples |
|||
* ISO 740:1976 Sodium carbonate for industrial use — Determination of total soluble alkalinity — Titrimetric method |
|||
* ISO 741:1976 Sodium carbonate for industrial use — Determination of sodium hydrogen carbonate content — Titrimetric method [Withdrawn without replacement] |
|||
* ISO 742:1973 Sodium carbonate for industrial use — Determination of chloride content — Mercurimetric method [Withdrawn without replacement] |
|||
* ISO 743:1976 Sodium carbonate for industrial use — Determination of sulphate content — Barium sulphate gravimetric method |
|||
* ISO/R 744:1968 Sodium carbonate for industrial use — Determination of iron content — 2,2'- Bipyridyl photometric method [Withdrawn without replacement] |
|||
* ISO 745:1976 Sodium carbonate for industrial use — Determination of loss of mass and of non-volatile matter at 250 degrees C [Withdrawn without replacement] |
|||
* ISO 746:1976 Sodium carbonate for industrial use — Determination of matter insoluble in water at 50 degrees C |
|||
* ISO/R 747:1968 Sodium carbonate for industrial use — Expression of test results [Withdrawn without replacement] |
|||
* ISO 748:2021 Hydrometry — Measurement of liquid flow in open channels using current-meters or floats — Velocity area methods using point velocity measurements |
|||
* ISO 749:1977 Oilseed residues — Determination of total ash |
|||
* ISO 750:1998 Fruit and vegetable products — Determination of titratable acidity |
|||
* ISO 751:1998 Fruit and vegetable products — Determination of water-insoluble solids |
|||
* ISO 752:2004 Zinc ingots |
|||
* ISO 753 Acetic acid for industrial use — Methods of test |
|||
** ISO 753-1:1981 Part 1: General [Withdrawn without replacement] |
|||
** ISO 753-2:1981 Part 2: Determination of acetic acid content — Titrimetric method [Withdrawn without replacement] |
|||
** ISO 753-3:1981 Part 3: Determination of formic acid content — Iodometric method [Withdrawn without replacement] |
|||
** ISO 753-4:1981 Part 4: Determination of acetaldehyde monomer content — Titrimetric method [Withdrawn without replacement] |
|||
** ISO 753-5:1981 Part 5: Determination of total acetaldehyde content — Titrimetric method [Withdrawn without replacement] |
|||
** ISO 753-6:1981 Part 6: Determination of permanganate index [Withdrawn without replacement] |
|||
** ISO 753-7:1981 Part 7: Determination of dichromate index [Withdrawn without replacement] |
|||
** ISO 753-8:1981 Part 8: Visual limit test for inorganic chlorides [Withdrawn without replacement] |
|||
** ISO 753-9:1981 Part 9: Visual limit test for inorganic sulphates [Withdrawn without replacement] |
|||
** ISO 753-10:1981 Part 10: Visual limit test for heavy metals (including iron) [Withdrawn without replacement] |
|||
* ISO 754:1982 Acetic anhydride for industrial use — Methods of test [Withdrawn without replacement] |
|||
* ISO 755 Butan-1-ol for industrial use — Methods of test |
|||
** ISO 755-1:1981 Part 1: General [Withdrawn without replacement] |
|||
** ISO 755-2:1981 Part 2: Determination of acidity — Titrimetric method [Withdrawn without replacement] |
|||
** ISO 755-3:1981 Part 3: Sulphuric acid colour test [Withdrawn without replacement] |
|||
* ISO 756 Propan-2-ol for industrial use — Methods of test |
|||
** ISO 756-1:1981 Part 1: General |
|||
** ISO 756-2:1981 Part 2: Determination of acidity — Titrimetric method [Withdrawn without replacement] |
|||
** ISO 756-3:1981 Part 3: Test for miscibility with water [Withdrawn without replacement] |
|||
* ISO 757 Acetone for industrial use — Methods of test |
|||
** ISO 757-1:1982 Part 1: General [Withdrawn without replacement] |
|||
** ISO 757-2:1982 Part 2: Determination of acidity to phenolphthalein — Titrimetric method [Withdrawn without replacement] |
|||
** ISO 757-3:1982 Part 3: Test for miscibility with water [Withdrawn without replacement] |
|||
** ISO 757-4:1983 Part 4: Determination of permanganate time [Withdrawn without replacement] |
|||
** ISO 757-5:1982 Part 5: Control test with Agulhon's reagent [Withdrawn without replacement] |
|||
* ISO 758:1976 Liquid chemical products for industrial use — Determination of density at 20 degrees C |
|||
* ISO 759:1981 Volatile organic liquids for industrial use — Determination of dry residue after evaporation on water bath — General method |
|||
* ISO 760:1978 Determination of water — Karl Fischer method (General method) |
|||
* ISO 761:1977 Acetic anhydride and butan-1-ol for industrial use — Determination of bromine number [Withdrawn without replacement] |
|||
* ISO 762:2003 Fruit and vegetable products — Determination of mineral impurities content |
|||
* ISO 763:2003 Fruit and vegetable products — Determination of ash insoluble in hydrochloric acid |
|||
* [[ISO 764]]:2020 Horology — Magnetic resistant watches |
|||
* ISO 765:2016 Pesticides considered not to require common names |
|||
* ISO 766:1972 Fibre building boards — Determination of dimensions of test pieces [Withdrawn: replaced with ISO 9424] |
|||
* ISO 767:1975 Fibre building boards — Determination of moisture content [Withdrawn: replaced with ISO 9425] |
|||
* ISO 768:1972 Fibre building boards — Determination of bending strength [Withdrawn without replacement] |
|||
* ISO 769:1972 Fibre building boards — Hard and medium boards — Determination of water absorption and of swelling in thickness after immersion in water [Withdrawn without replacement] |
|||
* ISO 770:2002 Crude or rectified oils of Eucalyptus globulus (Eucalyptus globulus Labill.) |
|||
* ISO 771:1977 Oilseed residues — Determination of moisture and volatile matter content |
|||
* ISO 772:2011 Hydrometry — Vocabulary and symbols |
|||
* ISO/R 773:1969 Rectangular or square parallel keys and their corresponding keyways (Dimensions in millimetres) [Withdrawn without replacement] |
|||
* ISO/R 774:1969 Taper keys with or without gib head and their corresponding keyways (Dimensions in millimetres) [Withdrawn without replacement] |
|||
* ISO/R 775:1969 Cylindrical and 1/10 conical shaft ends [Withdrawn without replacement] |
|||
* ISO 776:2011 Pulps — Determination of acid-insoluble ash |
|||
* ISO 777:2005 Paper, board and pulp — Determination of acid-soluble calcium [Withdrawn: replaced with ISO 12830] |
|||
* ISO 778:2005 Paper, board and pulp — Determination of acid-soluble copper [Withdrawn: replaced with ISO 12830] |
|||
* ISO 779:2005 Paper, board and pulp — Determination of acid-soluble iron [Withdrawn: replaced with ISO 12830] |
|||
* ISO 780:2015 Packaging – Distribution packaging — Graphical symbols for handling and storage of packages |
|||
* ISO/R 781:1968 Measurement of fluid flow by means of Venturi tubes inserted in circular cross-section conduits running full [Withdrawn: replaced with ISO 5167, later ISO 5167-1] |
|||
* ISO 782:1975 Microcopying — Measurement of screen luminance of microfilm readers [Withdrawn without replacement, but later restored as ISO 7565] |
|||
* ISO 783:1999 Metallic materials — Tensile testing at elevated temperature [Withdrawn: replaced with ISO 6892-2] |
|||
* ISO/R 784:1968 Conventional signs to be used in schemes for the installations of sanitary systems in ships [Withdrawn without replacement] |
|||
* ISO/R 785:1968 Pesticides — Common names — Eighth series of terms [Withdrawn: replaced with ISO 1750] |
|||
* ISO/R 786:1968 Units and symbols for refrigeration [Withdrawn without replacement] |
|||
* ISO 787 General methods of test for pigments and extenders |
|||
** ISO 787-1:1982 Part 1: Comparison of colour of pigments |
|||
** ISO 787-2:1981 Part 2: Determination of matter volatile at 105 degrees C |
|||
** ISO 787-3:2000 Part 3: Determination of matter soluble in water — Hot extraction method |
|||
** ISO 787-4:1981 Part 4: Determination of acidity or alkalinity of the aqueous extract |
|||
** ISO 787-5:1980 Part 5: Determination of oil absorption value |
|||
** ISO 787-7:2009 Part 7: Determination of residue on sieve — Water method — Manual procedure |
|||
** ISO 787-8:2000 Part 8: Determination of matter soluble in water — Cold extraction method |
|||
** ISO 787-9:2019 Part 9: Determination of pH value of an aqueous suspension |
|||
** ISO 787-10:1993 Part 10: Determination of density — Pyknometer method |
|||
** ISO 787-11:1981 Part 11: Determination of tamped volume and apparent density after tamping |
|||
** ISO/R 787-12:1970 Part 12: Determination of [Withdrawn without replacement] |
|||
** ISO 787-13:2019 Part 13: Determination of water-soluble sulphates, chlorides and nitrates |
|||
** ISO 787-14:2019 Part 14: Determination of resistivity of aqueous extract |
|||
** ISO 787-15:2019 Part 15: Comparison of resistance to light of coloured pigments of similar types |
|||
** ISO 787-16:1986 Part 16: Determination of relative tinting strength (or equivalent colouring value) and colour on reduction of coloured pigments — Visual comparison method |
|||
** ISO 787-17:2019 Part 17: Comparison of lightening power of white pigments |
|||
** ISO 787-18:1983 Part 18: Determination of residue on sieve — Mechanical flushing procedure |
|||
** ISO 787-19:2020 Part 19: Determination of water-soluble nitrates (Salicylic acid method) |
|||
** ISO 787-20:1979 Part 20: Comparison of ease of dispersion (Oscillatory shaking method) [Withdrawn: replaced with ISO 8780-2] |
|||
** ISO 787-21:1979 Part 21: Comparison of heat stability of pigments using a stoving medium |
|||
** ISO 787-22:1980 Part 22: Comparison of resistance to bleeding of pigments |
|||
** ISO 787-23:1979 Part 23: Determination of density (using a centrifuge to remove entrained air) |
|||
** ISO 787-24:1985 Part 24: Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments — Photometric methods |
|||
** ISO 787-25:2019 Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments — Colorimetric method |
|||
** ISO 787-28:2019 Part 28: Determination of total content of polychlorinated biphenyls (PCB) by dissolution, cleanup and GC-MS |
|||
* ISO 788:2021 Ultramarine pigments |
|||
* ISO 789 Agricultural tractors — Test procedures |
|||
** ISO 789-1:2018 Part 1: Power tests for power take-off |
|||
** ISO 789-2:2018 Part 2: Rear three-point linkage lifting capacity |
|||
** ISO 789-3:2015 Part 3: Turning and clearance diameters |
|||
** ISO 789-4:1986 Part 4: Measurement of exhaust smoke |
|||
** ISO 789-5:1983 Part 5: Partial power PTO — Non-mechanically transmitted power |
|||
** ISO 789-6:2019 Part 6: Centre of gravity |
|||
** ISO 789-7:1991 Part 7: Axle power determination |
|||
** ISO 789-8:1991 Part 8: Engine air cleaner |
|||
** ISO 789-9:2018 Part 9: Power tests for drawbar |
|||
** ISO/OECD 789-10:2006 Part 10: Hydraulic power at tractor/implement interface |
|||
** ISO 789-11:1996 Part 11: Steering capability of wheeled tractors |
|||
** ISO 789-12:2000 Part 12: Low temperature starting |
|||
** ISO 789-13:2018 Part 13: Vocabulary and specimen test report |
|||
* ISO 790:1973 Freight containers — Coding and identification [Withdrawn: replaced with ISO 6346] |
|||
* ISO 791:1973 Magnesium alloys — Determination of aluminium — 8-hydroxyquinoline gravimetric method |
|||
* ISO 792:1973 Magnesium and magnesium alloys — Determination of iron — Orthophenanthroline photometric method |
|||
* ISO 793:1973 Aluminium and aluminium alloys — Determination of iron — Orthophenanthroline photometric method |
|||
* ISO 794:1976 Magnesium and magnesium alloys — Determination of copper content — Oxalyldihydrazide photometric method |
|||
* ISO 795:1976 Aluminium and aluminium alloys — Determination of copper content — Oxalyldihydrazide photometric method |
|||
* ISO 796:1973 Aluminium alloys — Determination of copper — Electrolytic method |
|||
* ISO 797:1973 Aluminium and aluminium alloys — Determination of silicon — Gravimetric method |
|||
* ISO/R 798:1968 Chemical analysis of aluminium and its alloys — Gravimetric determination of zinc in aluminium alloys (zinc content between 0.50 and 6.5 %) [Withdrawn: replaced with ISO 1784] |
|||
* ISO 799 Ships and marine technology — Pilot ladders |
|||
** ISO 799-1:2019 Part 1: Design and specification |
|||
* ISO 800:1992 Plastics — Phenolic moulding materials — Specification [Withdrawn: replaced with ISO 14526] |
|||
* ISO 801 Pulps — Determination of saleable mass in lots |
|||
** ISO 801-1:1994 Part 1: Pulp baled in sheet form |
|||
** ISO 801-2:1994 Part 2: Pulps (such as flash-dried pulps) baled in slabs |
|||
** ISO 801-3:1994 Part 3: Unitized bales |
|||
* ISO 802:1976 Aluminium oxide primarily used for the production of aluminium — Preparation and storage of test samples [Withdrawn: replaced with ISO 23028] |
|||
* ISO 803:1976 Aluminium oxide primarily used for the production of aluminium — Determination of loss of mass at 300 degrees C (conventional moisture) [Withdrawn: replaced with ISO 806] |
|||
* ISO 804:1976 Aluminium oxide primarily used for the production of aluminium — Preparation of solution for analysis — Method by alkaline fusion [Withdrawn without replacement] |
|||
* ISO 805:1976 Aluminium oxide primarily used for the production of aluminium — Determination of iron content — 1,10- Phenanthroline photometric method [Withdrawn without replacement] |
|||
* ISO 806:2004 Aluminium oxide primarily used for the production of aluminium — Determination of loss of mass at 300 degrees C and 1 000 degrees C |
|||
* ISO/R 807:1968 Chemical analysis of magnesium and magnesium alloys — Polarographic determination of zinc (zinc content between 0.1 and 4 %) [Withdrawn without replacement] |
|||
* ISO 808:1973 Aluminium and aluminium alloys — Determination of silicon — Spectrophotometric method with the reduced silicomolybdic complex |
|||
* ISO 809:1973 Magnesium and magnesium alloys — Determination of manganese — Periodate photometric method (Manganese content between 0,01 and 0,8 %) |
|||
* ISO 810:1973 Magnesium and magnesium alloys — Determination of manganese — Periodate photometric method (Manganese content less than 0,01 %) |
|||
* ISO 811:2018 Textiles — Determination of resistance to water penetration — Hydrostatic pressure test |
|||
* ISO 812:2017 Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness |
|||
* ISO 813:2019 Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method |
|||
* ISO 814:2017 Rubber, vulcanized or thermoplastic — Determination of adhesion to metal — Two-plate method |
|||
* ISO 815 Rubber, vulcanized or thermoplastic — Determination of compression set |
|||
** ISO 815-1:2019 Part 1: At ambient or elevated temperatures |
|||
** ISO 815-2:2019 Part 2: At low temperatures |
|||
* ISO 816:1983 Rubber, vulcanized — Determination of tear strength of small test pieces (Delft test pieces) [Withdrawn: replaced with ISO 34-2] |
|||
* ISO 817:2014 Refrigerants — Designation and safety classification |
|||
* ISO 818:1975 Fibre building boards — Definition — Classification [Withdrawn without replacement] |
|||
* ISO 819:1975 Fibre building boards — Determination of density [Withdrawn: replaced with ISO 9427] |
|||
* ISO 820:1975 Particle boards — Definition and classification [Withdrawn without replacement] |
|||
* ISO 821:1975 Particle boards — Determination of dimensions of test pieces [Withdrawn: replaced with ISO 9424] |
|||
* ISO 822:1975 Particle boards — Determination of density [Withdrawn: replaced with ISO 9427] |
|||
* ISO 823:1975 Particle boards — Determination of moisture content [Withdrawn: replaced with ISO 9425] |
|||
* ISO/R 824 Household refrigerators |
|||
** ISO/R 824-1:1968 Part 1: Performance requirements [Withdrawn: replaced with ISO 7371] |
|||
* ISO/R 825 Household refrigerators |
|||
** ISO/R 825-1:1968 Part 1: Special low-temperature compartments for the storage of frozen foodstuffs [Withdrawn: replaced with ISO 7371] |
|||
* ISO/R 826:1968 Mechanical property limits for rolled products of aluminium and aluminium alloys [Withdrawn without replacement] |
|||
* ISO/R 827:1968 Mechanical property limits for extruded products of aluminium and aluminium alloys [Withdrawn without replacement] |
|||
* IEC/TR 828:1988 Pin allocations for future microprocessor systems using the IEC 603-2 connector [Withdrawn without replacement] |
|||
* ISO/R 829:1968 Mechanical property limits for aluminium alloy forgings [Withdrawn without replacement] |
|||
* ISO 830:1999 Freight containers — Vocabulary |
|||
* ISO/R 831:1968 Rules for construction of stationary boilers [Withdrawn without replacement] |
|||
* ISO 832:1994 Information and documentation — Bibliographic description and references — Rules for the abbreviation of bibliographic terms |
|||
* ISO 833:1974 Information and documentation — International list of periodical word title abbreviations [Withdrawn without replacement] |
|||
* ISO 834 Fire-resistance tests — Elements of building construction |
|||
** ISO 834-1:1999 Part 1: General requirements |
|||
** ISO 834-2:2019 Part 2: Requirements and recommendations for measuring furnace exposure on test samples |
|||
** ISO/TR 834-3:2012 Part 3: Commentary on test method and guide to the application of the outputs from the fire-resistance test |
|||
** ISO 834-4:2000 Part 4: Specific requirements for loadbearing vertical separating elements |
|||
** ISO 834-5:2000 Part 5: Specific requirements for loadbearing horizontal separating elements |
|||
** ISO 834-6:2000 Part 6: Specific requirements for beams |
|||
** ISO 834-7:2000 Part 7: Specific requirements for columns |
|||
** ISO 834-8:2002 Part 8: Specific requirements for non-loadbearing vertical separating elements |
|||
** ISO 834-9:2003 Part 9: Specific requirements for non-loadbearing ceiling elements |
|||
** ISO 834-10:2014 Part 10: Specific requirements to determine the contribution of applied fire protection materials to structural steel elements |
|||
** ISO 834-11:2014 Part 11: Specific requirements for the assessment of fire protection to structural steel elements |
|||
** ISO 834-12:2012 Part 12: Specific requirements for separating elements evaluated on less than full scale furnaces |
|||
** ISO 834-13:2019 Part 13: Requirements for the testing and assessment of applied fire protection to steel beams with web openings |
|||
** ISO 834-14:2019 Part 14: Requirements for the testing and assessment of applied fire protection to solid steel bar |
|||
* ISO 835:2007 Laboratory glassware — Graduated pipettes |
|||
* ISO 836:2001 Terminology for refractories |
|||
* ISO/R 837:1968 Aircraft seat rails and pins [Withdrawn: replaced with ISO 7166] |
|||
* [[ISO 838]]:1974 Paper — Holes for general filing purposes — Specifications |
|||
* ISO 839 Milling machine arbors with 7/24 tapers |
|||
** ISO 839-1:2006 Part 1: Dimensions and designation |
|||
** ISO 839-2:1977 Part 2: Accessories |
|||
* ISO 840:1973 Numerical control of machines — 7-bit coded character set [Withdrawn: replaced with ISO 6983-1] |
|||
* ISO 841:2001 Industrial automation systems and integration — Numerical control of machines — Coordinate system and motion nomenclature |
|||
* ISO 842:1984 Raw materials for paints and varnishes — Sampling [Withdrawn: replaced with ISO 15528] |
|||
* [[ISO 843]]:1997 Information and documentation — Conversion of Greek characters into Latin characters |
|||
* ISO 844:2014 Rigid cellular plastics — Determination of compression properties |
|||
* ISO 845:2006 Cellular plastics and rubbers — Determination of apparent density |
|||
* ISO 846:2019 Plastics — Evaluation of the action of microorganisms |
|||
* ISO/R 847:1968 Phosphoric acid for industrial use — Determination of sulphate content — Volumetric method [Withdrawn: replaced with ISO 2997] |
|||
* ISO 848:1981 Phosphoric acid for industrial use — Determination of calcium content — Titrimetric method [Withdrawn without replacement] |
|||
* ISO/R 849:1968 Phosphoric acid for industrial use — Determination of iron content — 2,2'- Bipyridyl spectrophotometric method [Withdrawn without replacement] |
|||
* ISO 850:1976 Sodium tripolyphosphate for industrial use — Determination of matter insoluble in water [Withdrawn without replacement] |
|||
* ISO 851:1976 Sodium tripolyphosphate for industrial use — Measurement of pH — Potentiometric method [Withdrawn without replacement] |
|||
* ISO/R 852:1968 Sodium tripolyphosphate and sodium pyrophosphate for industrial use — Determination of iron content — 2,2'- Bipyridyl spectrophotometric method [Withdrawn without replacement] |
|||
* ISO 853:1976 Sodium tripolyphosphate and sodium pyrophosphate for industrial use — Determination of loss on ignition [Withdrawn without replacement] |
|||
* ISO/R 854:1968 Requirements for 28-volt D.C. flat strip fuses for aircraft [Withdrawn without replacement] |
|||
* ISO 855:2003 Oil of lemon [Citrus limon (L.) Burm. f.], obtained by expression |
|||
* ISO 856:2006 Oil of peppermint (Mentha x piperita L.) |
|||
* ISO 857 Welding and allied processes — Vocabulary |
|||
** ISO 857-2:2005 Part 2: Soldering and brazing processes and related terms |
|||
* ISO 858:1973 Fishing nets — Designation of netting yarns in the Tex System |
|||
* ISO/R 859:1968 Testing and rating room air conditioners [Withdrawn: replaced with ISO 5151] |
|||
* [[ISO 860]]:2007 Terminology work — Harmonization of concepts and terms |
|||
* ISO/R 861:1968 Hexagon socket head cap screws — Metric series [Withdrawn: replaced with ISO 4762] |
|||
* ISO 862:1984 Surface active agents — Vocabulary |
|||
* ISO 863:2008 Cement — Test methods — Pozzolanicity test for pozzolanic cements |
|||
* ISO 864:1988 Arc welding — Solid and tubular cored wires which deposit carbon and carbon manganese steel — Dimensions of wires, spools, rims and coils [Withdrawn without replacement] |
|||
* ISO 865:1981 Slots in platens for projection welding machines |
|||
* ISO 866:2016 Centre drills for centre holes without protecting chamfers — Type A |
|||
* ISO/R 867:1968 Spindle noses and face plates — Bayonet type — Sizes for interchangeability — Metric series [Withdrawn: replaced with ISO 702-3] |
|||
* ISO 868:2003 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
|||
* ISO/R 869:1968 Plastics — Preparation of specimens for optical tests on plastics materials — Moulding method [Withdrawn without replacement] |
|||
* ISO/R 870:1968 Plastics — Preparation of specimens for optical tests on plastics materials — Casting method [Withdrawn without replacement] |
|||
* ISO 871:2006 Plastics — Determination of ignition temperature using a hot-air furnace |
|||
* ISO/R 872:1968 Plastics — Determination of ash of unplasticized cellulose acetate [Withdrawn: replaced with ISO 3451-3] |
|||
* ISO 873:1980 Peaches — Guide to cold storage |
|||
* ISO 874:1980 Fresh fruits and vegetables — Sampling |
|||
* ISO 875:1999 Essential oils — Evaluation of miscibility in ethanol |
|||
* ISO/R 876:1968 Special method of mechanical testing to determine the coding for deep penetration electrodes [Withdrawn without replacement] |
|||
* ISO 877 Plastics — Methods of exposure to solar radiation |
|||
** ISO 877-1:2009 Part 1: General guidance |
|||
** ISO 877-2:2009 Part 2: Direct weathering and exposure behind window glass |
|||
** ISO 877-3:2018 Part 3: Intensified weathering using concentrated solar radiation |
|||
* ISO/R 878:1968 Plastics — Determination of resistance of plastics to color change upon exposure to light of the enclosed carbon arc [Withdrawn: replaced with ISO 4892] |
|||
* ISO/R 879:1968 Plastics — Determination of resistance of plastics to color change upon exposure to light of a xenon lamp [Withdrawn: replaced with ISO 4892] |
|||
* ISO 880:1981 Asbestos-cement siding shingles [Withdrawn without replacement] |
|||
* ISO 881:1980 Asbestos-cement pipes, joints and fittings for sewerage and drainage [Withdrawn without replacement] |
|||
* ISO 882 Cardamom (Elettaria cardamomum (Linnaeus) Maton var. minuscula Burkill) — Specification |
|||
** ISO 882-1:1993 Part 1: Whole capsules |
|||
** ISO 882-2:1993 Part 2: Seeds |
|||
* ISO 883:2013 Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions |
|||
* ISO/R 884:1968 Pictorial marking of transit packages containing photographic materials sensitive to radiant energy [Withdrawn: replaced with ISO 780] |
|||
* ISO 885:2000 General purpose bolts and screws — Metric series — Radii under the head |
|||
* ISO 886:1973 Aluminium and aluminium alloys — Determination of manganese — Photometric method (Manganese content between 0,005 and 1,5 %) |
|||
* ISO 887:2000 Plain washers for metric bolts, screws and nuts for general purposes — General plan |
|||
* ISO 888:2012 Fasteners — Bolts, screws and studs — Nominal lengths and thread lengths |
|||
* ISO/R 889:1968 Test code for stationary steam generators of the power station type [Withdrawn without replacement] |
|||
* ISO/R 890:1968 Cinematography — Recording head gaps for two sound records on 16 mm magnetic film — Positions [Withdrawn: replaced with ISO 4242] |
|||
* ISO/R 891:1968 Cinematography — Recording head gaps for two sound records on 16 mm magnetic film — Dimensions [Withdrawn: replaced with ISO 4242] |
|||
* ISO/R 892:1968 Cinematography — Dimensions of projection reels for 8 mm motion-picture film (other than type S) [Withdrawn without replacement] |
|||
* ISO 893:1989 Surface active agents — Technical alkane sulfonates — Methods of analysis |
|||
* ISO 894:1977 Surface active agents — Technical sodium primary alkylsulphates — Methods of analysis |
|||
* ISO 895:1977 Surface active agents — Technical sodium secondary alkylsulphates — Methods of analysis |
|||
* ISO/TR 896:1977 Surface active agents — Scientific classification [Withdrawn without replacement] |
|||
* ISO 897:2000 Photography — Roll films, 126, 110 and 135-size films — Identification of the image-bearing side |
|||
* [[ISO 898]] Mechanical properties of fasteners made of carbon steel and alloy steel<ref name=VariesBetweenParts group=Note /> |
|||
* ISO 899 Plastics — Determination of creep behaviour |
|||
** ISO 899-1:2017 Part 1: Tensile creep |
|||
** ISO 899-2:2003 Part 2: Flexural creep by three-point loading |
|||
* ISO 900:1977 Aluminium oxide primarily used for the production of aluminium — Determination of titanium content — Diantipyrylmethane photometric method [Withdrawn without replacement] |
|||
* ISO 901:1976 Aluminium oxide primarily used for the production of aluminium — Determination of absolute density — Pyknometer method [Withdrawn without replacement] |
|||
* ISO 902:1976 Aluminium oxide primarily used for the production of aluminium — Measurement of the angle of repose |
|||
* ISO 903:1976 Aluminium oxide primarily used for the production of aluminium — Determination of untamped density [Withdrawn without replacement] |
|||
* ISO 904:1976 Hydrochloric acid for industrial use — Determination of total acidity — Titrimetric method [Withdrawn without replacement] |
|||
* ISO 905:1976 Hydrochloric acid for industrial use — Evaluation of hydrochloric acid concentration by measurement of density [Withdrawn without replacement] |
|||
* ISO 906:1976 Hydrochloric acid for industrial use — Determination of sulphate content — Barium sulphate gravimetric method [Withdrawn without replacement] |
|||
* ISO 907:1976 Hydrochloric acid for industrial use — Determination of sulphated ash — Gravimetric method [Withdrawn without replacement] |
|||
* ISO 908:1980 Hydrochloric acid for industrial use — Determination of oxidizing or reducing substances content — Titrimetric method [Withdrawn without replacement] |
|||
* ISO/R 909:1968 Hydrochloric acid for industrial use — Determination of iron content — 2,2'- Bipyridyl spectrophotometric method [Withdrawn without replacement] |
|||
* ISO 910:1977 Sulphuric acid and oleum for industrial use — Determination of total acidity, and calculation of free sulphur trioxide content of oleum — Titrimetric method |
|||
* ISO 911:1977 Sulphuric acid for industrial use — Evaluation of sulphuric acid concentration by measurement of density [Withdrawn without replacement] |
|||
* ISO/R 912:1968 Sulphuric acid and oleum for industrial use — Determination of sulphur dioxide content — Barium sulphate gravimetric method [Withdrawn without replacement] |
|||
* ISO 913:1977 Sulphuric acid and oleum for industrial use — Determination of ash — Gravimetric method [Withdrawn without replacement] |
|||
* ISO 914:1977 Sulphuric acid and oleum for industrial use — Determination of total nitrogen content — Titrimetric method after distillation [Withdrawn without replacement] |
|||
* ISO/R 915:1968 Sulphuric acid and oleum for industrial use — Determination of iron content — 2,2'- Bipyridyl spectrophotometric method [Withdrawn without replacement] |
|||
* ISO 916:2020 Testing of refrigerating systems |
|||
* ISO 917:1989 Testing of refrigerant compressors [Withdrawn without replacement] |
|||
* ISO 918:1983 Volatile organic liquids for industrial use — Determination of distillation characteristics |
|||
* ISO/R 919:1969 Guide for the preparation of classified vocabularies (example of method) [Withdrawn: replaced with ISO 10241] |
|||
* ISO 920:1976 Wool — Determination of fibre length (barbe and hauteur) using a comb sorter |
|||
* ISO 921:1997 Nuclear energy — Vocabulary [Withdrawn without replacement] |
|||
* ISO/R 922:1969 Plastics — Polypropylene (PP) and propylene-copolymer thermoplastics — Determination of isotactic index [Withdrawn: replaced with ISO 1873-1, now replaced by ISO 9113] |
|||
* ISO 923:2000 Coal cleaning equipment — Performance evaluation |
|||
* ISO 924:1989 Coal preparation plant — Principles and conventions for flowsheets |
|||
* ISO 925:2019 Solid mineral fuels — Determination of carbonate carbon content — Gravimetric method |
|||
* ISO/R 926:1969 Solid mineral fuels — Determination of total nitrogen, sulphur, chlorine, and phosphorus — Gravimetric method [Withdrawn: replaced with ISO 333 (now withdrawn), ISO 334, ISO 352 (now withdrawn), and ISO 622] |
|||
* ISO 927:2009 Spices and condiments — Determination of extraneous matter and foreign matter content |
|||
* ISO 928:1997 Spices and condiments — Determination of total ash |
|||
* ISO 929:1980 Spices and condiments — Determination of water-insoluble ash [Withdrawn without replacement] |
|||
* ISO 930:1997 Spices and condiments — Determination of acid-insoluble ash |
|||
* ISO 931:1980 Green bananas — Guide to storage and transport |
|||
* ISO/R 932:1969 Animal fats — Determination of insoluble impurities content [Withdrawn: replaced with ISO 663] |
|||
* ISO/R 933:1969 Animal fats — Determination of moisture and volatile matter content [Withdrawn: replaced with ISO 662] |
|||
* ISO 934:1980 Animal and vegetable fats and oils — Determination of water content — Entrainment method |
|||
* ISO 935:1988 Animal and vegetable fats and oils — Determination of titre |
|||
* ISO 936:1998 Meat and meat products — Determination of total ash |
|||
* ISO 937:1978 Meat and meat products — Determination of nitrogen content (Reference method) |
|||
* ISO 938:1975 Hand-operated stillage trucks — Principal dimensions |
|||
* ISO 939:1980 Spices and condiments — Determination of moisture content — Entrainment method |
|||
* ISO 940:1979 Spices and condiments — Determination of alcohol-soluble extract [Withdrawn without replacement] |
|||
* ISO 941:1980 Spices and condiments — Determination of cold water-soluble extract |
|||
* ISO/R 942:1969 Whiteheart malleable cast iron [Withdrawn: replaced with ISO 5922] |
|||
* ISO/R 943:1969 Blackheart malleable cast iron [Withdrawn: replaced with ISO 5922] |
|||
* ISO/R 944:1969 Pearlitic malleable cast iron [Withdrawn: replaced with ISO 5922] |
|||
* ISO 945 Microstructure of cast irons |
|||
** ISO 945-1:2019 Part 1: Graphite classification by visual analysis |
|||
** ISO/TR 945-2:2011 Part 2: Graphite classification by image analysis |
|||
** ISO/TR 945-3:2016 Part 3: Matrix structures |
|||
** ISO 945-4:2019 Part 4: Test method for evaluating nodularity in spheroidal graphite cast irons |
|||
* ISO 946:1975 Grey cast iron — Beam unnotched impact test [Withdrawn without replacement] |
|||
* ISO/R 947:1969 Recommended practice for radiographic inspection of circumferential fusion welded butt joints in steel pipes up to 50 mm (2 in) wall thickness [Withdrawn: replaced with ISO 1106-3, later ISO 17636, now ISO 17636-1] |
|||
* ISO 948:1980 Spices and condiments — Sampling |
|||
* ISO 949:1987 Cauliflowers — Guide to cold storage and refrigerated transport |
|||
* ISO 950:1979 Cereals — Sampling (as grain) (Withdrawn: replaced by ISO 13690, later ISO 24333) |
|||
* ISO 951:1979 Pulses in bags — Sampling (Withdrawn: replaced by ISO 13690, later ISO 24333) |
|||
* ISO/R 952:1969 Light metal and light metal alloys — Tubes — Tensile Test [Withdrawn: replaced with ISO 6892-1] |
|||
* ISO/R 953:1969 Light metal and light metal alloys — Tubes — Drift expanding test [Withdrawn: replaced with ISO 8493] |
|||
* ISO/R 954:1969 Light metal and light metal alloys — Tubes — Bend test [Withdrawn: replaced with ISO 7438] |
|||
* ISO/R 955:1969 Aluminium and aluminium alloys — Tubes — Flattening test [Withdrawn: replaced with ISO 8492] |
|||
* ISO/R 956:1969 Light metal and light metal alloys — Wires — Tensile Test [Withdrawn: replaced with ISO 6892-1] |
|||
* ISO/R 957:1969 Aluminium and aluminium alloys — Wires — Simple torsion test [Withdrawn: replaced with ISO 7800] |
|||
* ISO/R 958:1969 Aluminium and aluminium alloys — Wires — Wrapping test [Withdrawn: replaced with ISO 7802] |
|||
* ISO 959 Pepper (Piper nigrum L.), whole or ground — Specification |
|||
** ISO 959-1:1998 Part 1: Black pepper |
|||
** ISO 959-2:1998 Part 2: White pepper |
|||
* ISO 960:1988 Plastics — Polyamides (PA) — Determination of water content [Withdrawn: replaced with ISO 15512] |
|||
* ISO/R 961:1969 Information processing — Implementation of the 6-bit and 7-bit coded character sets on 7- track 12,7 mm (0.5 in) magnetic tape [Withdrawn without replacement] |
|||
* ISO 962:1974 Information processing — Implementation of the 7- bit coded character set and its 7- bit and 8-bit extensions on 9- track 12,7 mm (0.5 in) magnetic tape |
|||
* ISO 963:1973 Information processing — Guide for the definition of 4- bit character sets derived from the 7- bit coded character set for information processing interchange [Withdrawn without replacement] |
|||
* ISO/R 964:1969 Shipbuilding details — Mating dimensions for pipeline flanges for ships |
|||
* [[ISO 965]] ISO general purpose metric screw threads — Tolerances |
|||
* ISO/R 966:1969 Seeds — Sampling and methods of test [Withdrawn without replacement] |
|||
* ISO/R 967:1969 Pesticides — Common names — Ninth series of terms [Withdrawn: replaced with ISO 1750] |
|||
* ISO/R 968:1969 Pesticides — Common names — Tenth series of terms [Withdrawn: replaced with ISO 1750] |
|||
* ISO/R 969:1969 Pesticides — Common names — Eleventh series of terms [Withdrawn: replaced with ISO 1750] |
|||
* ISO/R 970:1969 Pesticides — Common names — Twelfth series of terms [Withdrawn: replaced with ISO 1750] |
|||
* ISO/R 971:1969 Pesticides — Common names — Thirteenth series of terms [Withdrawn: replaced with ISO 1750] |
|||
* ISO 972:1997 Chillies and capsicums, whole or ground (powdered) — Specification |
|||
* ISO 973:1999 Pimento (allspice) [Pimenta dioica (L.) Merr.], whole or ground — Specification |
|||
* ISO 974:2000 Plastics — Determination of the brittleness temperature by impact |
|||
* ISO 975:2021 Brown coals and lignites — Determination of yield of benzene-soluble extract — Semi-automatic method |
|||
* ISO 976:2013 Rubber and plastics — Polymer dispersions and rubber latices — Determination of pH |
|||
* ISO/R 977:1969 Sodium hydroxide for industrial use — Preparation and storage of test sample [Withdrawn: replaced with ISO 3195] |
|||
* ISO/R 978:1969 Sodium hydroxide for industrial use — Preparation of sample solution [Withdrawn: replaced with ISO 3195] |
|||
* ISO 979:1974 Sodium hydroxide for industrial use — Method of assay |
|||
* ISO 980:1976 Sodium hydroxide for industrial use — Determination of carbonates content — Gas-volumetric method [Withdrawn without replacement] |
|||
* ISO 981:1973 Sodium hydroxide for industrial use — Determination of chloride content — Mercurimetric method |
|||
* ISO 982:1976 Sodium hydroxide for industrial use — Determination of sulphate content — Barium sulphate gravimetric method [Withdrawn without replacement] |
|||
* ISO 983:1974 Sodium hydroxide for industrial use — Determination of iron content — 1,10- Phenanthroline photometric method [Withdrawn without replacement] |
|||
* ISO 984:1974 Sodium hydroxide for industrial use — Determination of silica content — Reduced silico-molybdic complex photometric method [Withdrawn without replacement] |
|||
* ISO 985:1974 Sodium hydroxide for industrial use — Determination of silica content — Gravimetric method by precipitation of quinoline molybdosilicate [Withdrawn without replacement] |
|||
* ISO 986:1976 Sodium hydroxide for industrial use — Determination of calcium content — EDTA (disodium salt) complexometric method [Withdrawn without replacement] |
|||
* ISO/R 987:1969 Sodium hydroxide for industrial use — Determination of water insoluble matter [Withdrawn without replacement] |
|||
* ISO/R 988:1969 Potassium hydroxide for industrial use — Preparation and storage of test sample [Withdrawn: replaced with ISO 2466] |
|||
* ISO/R 989:1969 Potassium hydroxide for industrial use — Preparation of sample solution [Withdrawn: replaced with ISO 2466] |
|||
* ISO 990:1974 Potassium hydroxide for industrial use — Method of assay [Withdrawn without replacement] |
|||
* ISO 991:1976 Potassium hydroxide for industrial use — Determination of carbonates content — Gas-volumetric method [Withdrawn without replacement] |
|||
* ISO 992:1975 Potassium hydroxide for industrial use — Determination of chlorides content — Mercurimetric method [Withdrawn without replacement] |
|||
* ISO 993:1976 Potassium hydroxide for industrial use — Determination of sulphate content — Barium sulphate gravimetric method [Withdrawn without replacement] |
|||
* ISO 994:1973 Potassium hydroxide for industrial use — Determination of iron content — 1,10- Phenanthroline photometric method [Withdrawn without replacement] |
|||
* ISO 995:1975 Potassium hydroxide for industrial use — Determination of silica content — Reduced silico-molybdic complex photometric method [Withdrawn without replacement] |
|||
* ISO 996:1976 Potassium hydroxide for industrial use — Determination of silica content — Gravimetric method by precipitation of quinoline molybdosilicate [Withdrawn without replacement] |
|||
* ISO 997:1976 Potassium hydroxide for industrial use — Determination of calcium content — EDTA (disodium salt) complexometric method [Withdrawn without replacement] |
|||
* ISO/R 998:1969 Potassium hydroxide for industrial use — Determination of water insoluble matter [Withdrawn without replacement] |
|||
* [[ISO 999]]:1996 Information and documentation — Guidelines for the content, organization, and presentation of indexes |
|||
== ISO 1000 – ISO 1499 == |
|||
* [[ISO 1000]] [[SI]] units and recommendations for the use of their multiples and of certain other units [Withdrawn 2009-11-17: replaced with ISO 80000-1] |
|||
* ISO/IEC 1001:2012 Information technology – File structure and labelling of magnetic tapes for information interchange |
|||
* ISO 1002:1983 Rolling bearings — Airframe bearings — Characteristics, boundary dimensions, tolerances, static load ratings |
|||
* ISO 1003:2008 Spices — Ginger (Zingiber officinale Roscoe) — Specification |
|||
* [[ISO 1004]] Information processing – Magnetic ink character recognition – Print specifications |
|||
** ISO 1004-1:2013 Part 1: Print specifications for [[E-13B]] |
|||
** ISO 1004-2:2013 Part 2: Print specifications for [[CMC7]] |
|||
* ISO 1005 Railway rolling stock material |
|||
** ISO 1005-1:1994 Part 1: Rough-rolled tyres for tractive and trailing stock — Technical delivery conditions |
|||
** ISO 1005-2:1986 Part 2: Tyres, wheel centres and tyred wheels for tractive and trailing stock — Dimensional, balancing and assembly requirements |
|||
** ISO 1005-3:1982 Part 3: Axles for tractive and trailing stock — Quality requirements |
|||
** ISO 1005-4:1986 Part 4: Rolled or forged wheel centres for tyred wheels for tractive and trailing stock — Quality requirements |
|||
** ISO/R 1005-5:1969 Part 5: Cast wheel centres in non-alloy steel for tyred wheels for trailer stock [Withdrawn without replacement] |
|||
** ISO 1005-6:1994 Part 6: Solid wheels for tractive and trailing stock — Technical delivery conditions |
|||
** ISO 1005-7:1982 Part 7: Wheelsets for tractive and trailing stock — Quality requirements |
|||
** ISO 1005-8:1986 Part 8: Solid wheels for tractive and trailing stock — Dimensional and balancing requirements |
|||
** ISO 1005-9:1986 Part 9: Axles for tractive and trailing stock — Dimensional requirements |
|||
* ISO 1006:1983 Building construction — Modular coordination — Basic module [Withdrawn: replaced with ISO 21723] |
|||
* [[ISO 1007]] Photography – 135-size film and magazine – Specifications |
|||
* ISO 1008:1992 Photography — Paper dimensions — Pictorial sheets |
|||
* ISO 1009:2000 Photography — Paper dimensions — Rolls for printers |
|||
* ISO 1010:1973 Photography — Colour paper for general use — Sizes of sheet material [Withdrawn: replaced with ISO 1008] |
|||
* ISO 1011:1973 Photography — Colour paper for roll paper printers — Sizes of rolls [Withdrawn: replaced with ISO 1009] |
|||
* ISO 1012:1998 Photography — Films in sheets and rolls for general use — Dimensions |
|||
* ISO 1013:2020 Coke — Determination of bulk density in a large container |
|||
* ISO 1014:2021 Coke — Determination of true relative density, apparent relative density and porosity |
|||
* ISO 1015:1992 Brown coals and lignites — Determination of moisture content — Direct volumetric method [Withdrawn without replacement] |
|||
* ISO/R 1016:1969 Brown coals and lignites — Determination of ash [Withdrawn: replaced with ISO 1171] |
|||
* ISO 1017:2006 Brown coals and lignites — Determination of acetone-soluble material |
|||
* ISO 1018:2019 Hard coal — Determination of moisture-holding capacity |
|||
* ISO 1019:1982 Cinematography — Spools, daylight loading type for 16 mm motion-picture cameras — Dimensions |
|||
* ISO 1020:1974 Cinematography — Spools, daylight loading type for double-8 mm motion-picture cameras — Dimensions [Withdrawn without replacement] |
|||
* ISO 1021:1980 Aircraft — Engine nacelle fire extinguisher apertures and doors |
|||
* ISO 1022:1988 Aerospace — Gaseous oxygen replenishment connection for use in fluid systems (old type) — Dimensions (Inch series) (Not valid for new designs) [Withdrawn: replaced with ISO 8775 on 2012-04-02] |
|||
* ISO 1023:1974 Aircraft — High pressure air charging valves [Withdrawn without replacement] |
|||
* ISO 1024:1989 Metallic materials — Hardness test — Rockwell superficial test (scales 15N, 30N, 45N, 15T, 30T and 45T) [Withdrawn: replaced with ISO 6508-1] |
|||
* ISO 1025:1981 Textile machinery and accessories — Sectional beams for warp knitting machines — Terminology and main dimensions [Withdrawn: replaced with ISO 8116-5] |
|||
* ISO 1026:1982 Fruit and vegetable products — Determination of dry matter content by drying under reduced pressure and of water content by azeotropic distillation |
|||
* ISO 1027:1983 Radiographic image quality indicators for non-destructive testing — Principles and identification [Withdrawn: replaced with ISO 19232-(1-2)] |
|||
* ISO 1028:1973 Information processing — Flowchart symbols [Withdrawn: replaced with ISO 5807] |
|||
* ISO 1029:1974 Coniferous sawn timber — Defects — Classification |
|||
* ISO 1030:1975 Coniferous sawn timber — Defects — Measurement |
|||
* ISO 1031:1974 Coniferous sawn timber — Defects — Terms and definitions |
|||
* ISO 1032:1974 Coniferous sawn timber — Sizes — Terms and definitions [Withdrawn: replaced with ISO 24294] |
|||
* ISO 1033:1975 Aircraft — Dimensions for general purpose push-pull three-pole circuit-breakers |
|||
* ISO 1034:1973 Aircraft – Ground air-conditioning connections |
|||
* ISO 1035 Hot-rolled steel bars |
|||
** ISO 1035-1 Part 1: Dimensions of round bars |
|||
** ISO 1035-2 Part 2: Dimensions of square bars |
|||
** ISO 1035-3 Part 3: Dimensions of flat bars |
|||
** ISO 1035-4 Part 4: Tolerances |
|||
* ISO 1036:1984 Textile machinery — Dyeing and finishing machines — Definition of left and right sides |
|||
* ISO 1037:1982 Textile machinery and accessories — Beams for dyeing slivers and yarn — Terminology and main dimensions [Withdrawn: replaced with ISO 8116-7] |
|||
* ISO/R 1038:1969 Rolling bearings — Cylindrical rolling bearings — Radial internal clearance [Withdrawn: replaced with ISO 5753] |
|||
* ISO 1039:1995 Cinematography — Cores for motion-picture and magnetic film rolls — Dimensions |
|||
* ISO 1040:1983 Building construction — Modular coordination — Multimodules for horizontal coordinating dimensions [Withdrawn: replaced with ISO 21723] |
|||
* ISO 1041:1973 Essential oils — Determination of freezing point |
|||
* ISO 1042:1998 Laboratory glassware — One-mark volumetric flasks |
|||
* ISO 1043 Plastics — Symbols and abbreviated terms |
|||
** ISO 1043-1:2011 Part 1: Basic polymers and their special characteristics |
|||
** ISO 1043-2:2011 Part 2: Fillers and reinforcing materials |
|||
** ISO 1043-3:2016 Part 3: Plasticizers |
|||
** ISO 1043-4:2021 Part 4: Flame retardants |
|||
* ISO 1044:1993 Industrial trucks — Lead-acid traction batteries for electric trucks — Preferred voltages [Withdrawn without replacement] |
|||
* ISO/R 1045:1969 Straight resistance spot welding electrodes – Dimensions [Withdrawn: replaced with ISO 5184] |
|||
* ISO 1046:1973 Architectural and building drawings — Vocabulary [Withdrawn: replaced with ISO 10209-1, now ISO 10209] |
|||
* ISO 1047:1973 Architectural and building drawings — Presentation of drawings — Scales [Withdrawn without replacement] |
|||
* ISO 1048:1991 Photography — Exposed roll films — Identification [Withdrawn: replaced with ISO 732] |
|||
* ISO 1049:1975 Continuous mechanical handling equipment for loose bulk materials — Vibrating conveyors and feeders with rectangular or trapezoidal trough |
|||
* ISO 1050:1975 Continuous mechanical handling equipment for loose bulk materials — Screw conveyors |
|||
* ISO 1051:1999 Rivet shank diameters |
|||
* ISO 1052:1982 Steels for general engineering purposes [Withdrawn without replacement] |
|||
* ISO 1053:1975 Zinc — Determination of copper content — Spectrophotometric method [Withdrawn without replacement] |
|||
* ISO 1054:1975 Zinc — Determination of cadmium content — Polarographic method [Withdrawn without replacement] |
|||
* ISO 1055:1975 Zinc and zinc alloys — Determination of iron content — Spectrophotometric method [Withdrawn without replacement] |
|||
* ISO 1056:1975 Numerical control of machines — Punched tape block formats — Coding of preparatory functions G and miscellaneous functions M [Withdrawn: replaced with ISO 6983-1] |
|||
* ISO 1057:1973 Numerical control of machines — Interchangeable punched tape variable block format for positioning and straight-cut machining [Withdrawn: replaced with ISO 6983-1] |
|||
* ISO 1058:1973 Numerical control of machines — Punched tape variable block for positioning and straight-cut machining [Withdrawn: replaced with ISO 6983-1] |
|||
* ISO 1059:1973 Numerical control of machines — Punched tape fixed block format for positioning and straight-cut machining [Withdrawn: replaced with ISO 6983-1] |
|||
* ISO 1060 Plastics — Homopolymer and copolymer resins of vinyl chloride |
|||
** ISO 1060-1:1998 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 24024-1] |
|||
** ISO 1060-2:1998 Part 2: Preparation of test samples and determination of properties [Withdrawn: replaced with ISO 24024-2] |
|||
* ISO 1061:1990 Plastics — Unplasticized cellulose acetate — Determination of free acidity |
|||
* ISO/R 1062:1969 Pesticides — Common names — Fourteenth series of terms [Withdrawn: replaced with ISO 1750] |
|||
* ISO 1063:1974 Surface active agents — Determination of stability in hard water |
|||
* ISO 1064:1974 Surface active agents — Determination of apparent density of pastes on filling |
|||
* ISO 1065:1991 Non-ionic surface-active agents obtained from ethylene oxide and mixed non-ionic surface-active agents — Determination of cloud point |
|||
* ISO 1066:1975 Analysis of soaps — Determination of glycerol content — Titrimetric method |
|||
* ISO 1067:1974 Analysis of soaps — Determination of unsaponifiable, unsaponified and unsaponified saponifiable matter |
|||
* ISO 1068:1975 Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of compacted apparent bulk density |
|||
* ISO 1069:1973 Magnetic compasses and binnacles for sea navigation – Vocabulary |
|||
* ISO 1070:1992 Liquid flow measurement in open channels – Slope-area method |
|||
* ISO 1071:2015 Welding consumables — Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron — Classification |
|||
* ISO 1072:1975 Solid wood parquet — General characteristics |
|||
* ISO 1073 Alphanumeric character sets for optical recognition |
|||
** [[ISO 1073-1]]:1976 Part 1: Character set [[OCR-A]] – Shapes and dimensions of the printed image |
|||
** [[ISO 1073-2]]:1976 Part 2: Character set [[OCR-B]] – Shapes and dimensions of the printed image |
|||
* ISO 1074:1991 Counterbalanced fork-lift trucks — Stability tests [Withdrawn: replaced with ISO 22915-2] |
|||
* ISO/R 1075:1969 Performance requirements for heat-resisting (190 °C) electrical cables with copper conductors for aircraft [Withdrawn without replacement] |
|||
* ISO/R 1076:1969 General purpose electric cables with aluminium or aluminium alloy conductors for aircraft [Withdrawn without replacement] |
|||
* ISO/R 1077:1969 Dimensions of elastometric toroidal sealing rings for pipe-fittings in aircraft (Inch series – Class 1 tolerances) [Withdrawn without replacement] |
|||
* ISO/R 1078:1969 Dimensions of elastometric toroidal sealing rings for aircraft (Inch series – Class 1 tolerances) [Withdrawn without replacement] |
|||
* ISO 1079:1989 Metallic materials — Hardness test — Verification of Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T) [Withdrawn: replaced with ISO 6508-2] |
|||
* ISO 1080:1975 Machine tools — Morse taper shanks — Cotter slots with taper keys |
|||
* ISO 1081:2013 Belt drives – V-belts and V-ribbed belts, and corresponding grooved pulleys – Vocabulary |
|||
* ISO 1082:1990 Mining — Shackle type connector units for chain conveyors |
|||
* ISO 1083:2018 Spheroidal graphite cast irons — Classification |
|||
* ISO 1084:1975 Industrial tractors — Definition and nominal rating [Withdrawn without replacement] |
|||
* ISO 1085:2016 Assembly tools for screws and nuts — Double-ended wrenches — Size pairing |
|||
* ISO 1086:1991 Information and documentation – Title leaves of books |
|||
* ISO 1087:2019 Terminology work and terminology science — Vocabulary |
|||
* ISO 1088:2007 Hydrometry – Velocity-area methods using current-meters – Collection and processing of data for determination of uncertainties in flow measurement |
|||
* ISO 1089:1980 Electrode taper fits for spot welding equipment — Dimensions |
|||
* ISO 1090:1981 Office machines and data processing equipment — Function key symbols on typewriters [Withdrawn: replaced with ISO 9995-(1,7)] |
|||
* ISO 1091:1977 Typewriters — Layout of printing and function keys [Withdrawn: replaced with ISO 9995-(1,7)] |
|||
* ISO 1092 |
|||
** ISO 1092-1:1974 Adding machines and calculating machines — Numeric section of ten-key keyboards [Withdrawn: replaced with ISO 9995-(1,7)] |
|||
* ISO 1093:1981 Adding machines and calculating machines — Keytop and printed or displayed symbols [Withdrawn: replaced with ISO 9995-(1,7)] |
|||
* ISO/R 1094:1969 Adding machines and calculating machines — Classification [Withdrawn without replacement] |
|||
* ISO 1095:1989 Shipbuilding and marine structures — Toughened safety glass panes for side scuttles [Withdrawn: replaced with ISO 21005] |
|||
* ISO 1096:2021 Plywood — Classification |
|||
* ISO 1097:1975 Plywood — Measurement of dimensions of panels [Withdrawn without replacement] |
|||
* ISO 1098:1975 Veneer plywood for general use — General requirements [Withdrawn without replacement] |
|||
* ISO 1099:2017 Metallic materials — Fatigue testing — Axial force-controlled method [Withdrawn without replacement] |
|||
* ISO 1100 Hydrometry – Measurement of liquid flow in open channels |
|||
** ISO 1100-1:1996 Part 1: Establishment and operation of a gauging station [Withdrawn: replaced with ISO 18365] |
|||
** ISO 1100-2:2010 Part 2: Determination of the stage-discharge relationship [Withdrawn: replaced with ISO 18320] |
|||
* ISO 1101:2017 Geometrical product specifications (GPS) – Geometrical tolerancing – Tolerances of form, orientation, location and run-out |
|||
* ISO 1102:2001 Commercial road vehicles — 50 mm drawbar eye — Interchangeability |
|||
* ISO 1103:2007 Road vehicles — Coupling balls for caravans and light trailers — Dimensions |
|||
* ISO 1104:1977 Surface active agents — Technical sodium alkylarylsulphonates (excluding benzene derivatives) — Methods of analysis |
|||
* ISO/R 1105:1969 Pesticides considered not to require common names — Second list [Withdrawn: replaced with ISO 765] |
|||
* ISO 1106 Recommended practice for radiographic examination of fusion welded joints |
|||
** ISO 1106-1:1984 Part 1: Fusion welded butt joints in steel plates up to 50 mm thick [Withdrawn: replaced with ISO 17636] |
|||
** ISO 1106-2:1985 Part 2: Fusion welded butt joints in steel plates thicker than 50 mm and up to and including 200 mm in thickness [Withdrawn: replaced with ISO 17636] |
|||
** ISO 1106-3:1984 Part 3: Fusion welded circumferential joints in steel pipes of up to 50 mm wall thickness [Withdrawn: replaced with ISO 17636] |
|||
* ISO 1107:2017 Fishing nets – Netting – Basic terms and definitions |
|||
* ISO 1108:1992 Spices and condiments — Determination of non-volatile ether extract |
|||
* ISO 1109:1975 Refractory products — Classification of dense shaped refractory products [Withdrawn: replaced with ISO 10081-1] |
|||
* ISO 1110:2019 Plastics — Polyamides — Accelerated conditioning of test specimens |
|||
* ISO 1111 Single cold-reduced tinplate and single cold-reduced blackplate |
|||
** ISO 1111-1:1983 Part 1: Electrolytic and hot-dipped tinplate sheet and blackplate sheet [Withdrawn: replaced with ISO 11949] |
|||
** ISO 1111-2:1983 Part 2: Electrolytic tinplate coil and blackplate coil for subsequent cutting into sheet form [Withdrawn: replaced with ISO 11949] |
|||
* ISO 1112:2009 Horology – Functional and non-functional jewels |
|||
* ISO 1113:1979 Information processing – Representation of the 7- bit coded character set on punched tape |
|||
* ISO 1114:1977 Cocoa beans — Cut test [Withdrawn: replaced with ISO 2451] |
|||
* ISO/R 1115:1969 Finishes with the external screw thread for glass containers and gauges for inspection of screw closures [Withdrawn without replacement] |
|||
* ISO 1116:1999 Micrographics — 16 mm and 35 mm microfilm spools and reels — Specifications [Withdrawn without replacement] |
|||
* ISO 1117:1975 Bonded abrasive products — Grinding-wheel dimensions (Part 2) [Withdrawn: replaced with ISO 603-(1-16)] |
|||
* ISO 1118:1978 Aluminium and aluminium alloys — Determination of titanium — Spectrophotometric chromotropic acid method |
|||
* ISO 1119:2011 Geometrical product specifications (GPS) – Series of conical tapers and taper angles |
|||
* ISO 1120:2012 Conveyor belts — Determination of strength of mechanical fastenings — Static test method |
|||
* ISO 1121:1976 Conveyor belts — List of characteristics which may be required according to use [Withdrawn without replacement] |
|||
* ISO 1122 Vocabulary of gear terms |
|||
** ISO 1122-1:1998 Part 1: Definitions related to geometry |
|||
** ISO 1122-2:1999 Part 2: Definitions related to worm gear geometry |
|||
* ISO 1123:1976 Tapered roller bearings — Inch series — Chamfer dimension limits [Withdrawn without replacement] |
|||
* ISO 1124:1988 Rubber compounding ingredients — Carbon black shipment sampling procedures |
|||
* ISO 1125:2015 Rubber compounding ingredients — Carbon black — Determination of ash |
|||
* ISO 1126:2015 Rubber compounding ingredients — Carbon black — Determination of loss on heating |
|||
* ISO 1127:1992 Stainless steel tubes — Dimensions, tolerances and conventional masses per unit length |
|||
* ISO/R 1128:1969 Steel tubes — Butt-welding bends 5D (90° and 180°) [Withdrawn: replaced with ISO 3419] |
|||
* ISO 1129:1980 Steel tubes for boilers, superheaters and heat exchangers — Dimensions, tolerances and conventional masses per unit length [Withdrawn without replacement] |
|||
* ISO 1130:1975 Textile fibres — Some methods of sampling for testing |
|||
* ISO 1131:1976 Textile machinery and accessories — Weft pirns for box-loaders for automatic looms — Dimensions of pirn tip [Withdrawn without replacement] |
|||
* ISO 1132 Rolling bearings – Tolerances |
|||
** ISO 1132-1:2000 Part 1: Terms and definitions |
|||
** ISO 1132-2:2001 Part 2: Measuring and gauging principles and methods |
|||
* ISO 1133 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics |
|||
** ISO 1133-1:2011 Part 1: Standard method |
|||
** ISO 1133-2:2011 Part 2: Method for materials sensitive to time-temperature history and/or moisture |
|||
* ISO 1134:1993 Pears — Cold storage |
|||
* ISO 1135 Transfusion equipment for medical use |
|||
** ISO 1135-1:1987 Part 1: Glass transfusion bottles, closures and caps [Withdrawn without replacement] |
|||
** ISO 1135-3:2016 Part 3: Blood-taking sets for single use |
|||
** ISO 1135-4:2015 Part 4: Transfusion sets for single use, gravity feed |
|||
** ISO 1135-5:2015 Part 5: Transfusion sets for single use with pressure infusion apparatus |
|||
* ISO 1136:2015 Wool — Determination of mean diameter of fibres — Air permeability method |
|||
* ISO 1137:1975 Plastics — Determination of behaviour in a ventilated tubular oven [Withdrawn without replacement] |
|||
* ISO 1138:2007 Rubber compounding ingredients — Carbon black — Determination of sulfur content |
|||
* ISO 1139:1973 Textiles — Designation of yarns |
|||
* ISO 1140:2021 Fibre ropes — Polyamide — 3-, 4-, 8- and 12-strand ropes |
|||
* ISO 1141:2021 Fibre ropes — Polyester — 3-, 4-, 8- and 12-strand ropes |
|||
* ISO 1142:1973 Ropes — Sampling and conditioning for testing [Withdrawn: replaced with ISO 2307] |
|||
* ISO 1143:2021 Metallic materials — Rotating bar bending fatigue testing |
|||
* ISO 1144:2016 Textiles — Universal system for designating linear density (Tex System) |
|||
* ISO/R 1145:1969 Refractory arch bricks — Dimensions [Withdrawn: replaced with ISO 5019-2] |
|||
* ISO 1146:1988 Pyrometric reference cones for laboratory use – Specification |
|||
* ISO 1147:1995 Plastics/rubber — Polymer dispersions and synthetic rubber latices — Freeze-thaw cycle stability test |
|||
* ISO 1148:1980 Plastics — Aqueous dispersions of polymers and copolymers — Determination of pH [Withdrawn: replaced with ISO 976] |
|||
* ISO/R 1149:1969 Layout of multilingual classified vocabularies [Withdrawn: replaced with ISO 10241] |
|||
* ISO 1150:1997 Textile machinery and accessories — Drop wires for warp stop motions for weaving machines with automatic drawing-in |
|||
* ISO 1151 [[Flight dynamics]] – Concepts, quantities and symbols |
|||
** ISO 1151-1:1988 Part 1: Aircraft motion relative to the air |
|||
** ISO 1151-2:1985 Part 2: Motions of the aircraft and the atmosphere relative to the Earth |
|||
** ISO 1151-3:1989 Part 3: Derivatives of forces, moments and their coefficients |
|||
** ISO 1151-4:1994 Part 4: Concepts and quantities used in the study of aircraft stability and control |
|||
** ISO 1151-5:1987 Part 5: Quantities used in measurements |
|||
** ISO 1151-6:1982 Part 6: Aircraft geometry |
|||
** ISO 1151-7:1985 Part 7: Flight points and flight envelopes |
|||
** ISO 1151-8:1992 Part 8: Concepts and quantities used in the study of the dynamic behaviour of the aircraft |
|||
** ISO 1151-9:1993 Part 9: Models of atmospheric motions along the trajectory of the aircraft |
|||
* ISO 1152:1974 [[Flight dynamics]] – Concepts, quantities and symbols – Part 2: Motions of the aircraft and the atmosphere relative to the Earth [Renamed ISO 1151-2] |
|||
* ISO 1153:1972 [[Flight dynamics]] – Concepts, quantities and symbols – Part 3: Derivatives of forces, moments and their coefficients [Renamed ISO 1151-3] |
|||
* ISO 1154:1975 Information processing – Punched paper tape – Dimensions and location of feed holes and code holes |
|||
* [[ISO 1155]]:1978 Information processing – Use of longitudinal parity to detect errors in information messages |
|||
* ISO/R 1156:1969 Shipbuilding details – Wrought aluminium alloys for use in shipbuilding [Withdrawn without replacement] |
|||
* ISO 1157:1990 Plastics — Cellulose acetate in dilute solution — Determination of viscosity number and viscosity ratio [Withdrawn without replacement] |
|||
* ISO 1158:1998 Plastics — Vinyl chloride homopolymers and copolymers — Determination of chlorine content |
|||
* ISO 1159:1978 Plastics — Vinyl chloride-vinyl acetate copolymers — Determination of vinyl acetate [Withdrawn without replacement] |
|||
* ISO 1160:1976 Rolling bearings for railway axle-boxes — Acceptance inspection [Withdrawn without replacement] |
|||
* ISO 1161:2016 Series 1 freight containers — Corner and intermediate fittings — Specifications |
|||
* ISO 1162:1975 Cereals and pulses — Method of test for infestation by X-ray examination [Withdrawn: replaced with ISO 6639-4] |
|||
* ISO 1163 Plastics — Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials |
|||
** ISO 1163-1:1995 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 21306-1] |
|||
** ISO 1163-2:1995 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 21306-2] |
|||
* ISO/R 1164:1970 Polyethylene (PE) pipes — Tolerances on outside diameters [Withdrawn: replaced with ISO 3607, now ISO 11922-(1-2)] |
|||
* ISO/R 1165:1970 Unplasticized polyvinyl chloride (PVC) pipes — Tolerances on wall thicknesses up to 6 mm [Withdrawn: replaced with ISO 3606, now ISO 11922-(1-2)] |
|||
* ISO/R 1166:1970 Polyethylene (PE) pipes — Tolerances on wall thicknesses up to 6 mm [Withdrawn: replaced with ISO 3607, now ISO 11922-(1-2)] |
|||
* ISO 1167 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure |
|||
** ISO 1167-1:2006 Part 1: General method |
|||
** ISO 1167-2:2006 Part 2: Preparation of pipe test pieces |
|||
* ISO 1168:1973 Combine harvesters — Width of cut and number of knife sections [Withdrawn without replacement] |
|||
* ISO 1169:2006 Zinc alloys — Determination of aluminium content — Titrimetric method |
|||
* ISO 1170:2020 Coal and coke — Calculation of analyses to different bases |
|||
* ISO 1171:2010 Solid mineral fuels — Determination of ash |
|||
* ISO 1172:1996 Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods |
|||
* ISO 1173:2001 Assembly tools for screws and nuts — Drive ends for hand- and machine-operated screwdriver bits and connecting parts — Dimensions, torque testing |
|||
* ISO 1174 Assembly tools for screws and nuts — Driving squares |
|||
** ISO 1174-1:2011 Part 1: Driving squares for hand socket tools |
|||
** ISO 1174-2:1996 Part 2: Driving squares for power socket tools |
|||
* ISO 1175:1976 Shipbuilding — Dimensions and sectional properties of aluminium alloy sections for marine use [Withdrawn without replacement] |
|||
* ISO 1176:1990 Road vehicles – Masses – Vocabulary and codes |
|||
* ISO 1177:1985 Information processing – Character structure for start/stop and synchronous character oriented transmission |
|||
* ISO 1178:1976 Magnesium alloys — Determination of soluble zirconium — Alizarin sulphonate photometric method |
|||
* ISO 1179 Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing |
|||
** ISO 1179-1:2013 Part 1: Threaded ports |
|||
** ISO 1179-2:2013 Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) |
|||
** ISO 1179-3:2007 Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H) |
|||
** ISO 1179-4:2007 Part 4: Stud ends for general use only with metal-to-metal sealing (type B) |
|||
* ISO 1180:1983 Shanks for pneumatic tools and fitting dimensions of chuck bushings |
|||
* ISO 1181:2004 Fibre ropes — Manila and sisal — 3-, 4- and 8-strand ropes |
|||
* ISO 1182:2020 Reaction to fire tests for products—Non-combustibility test |
|||
* ISO 1183 Plastics — Methods for determining the density of non-cellular plastics |
|||
** ISO 1183-1:2019 Part 1: Immersion method, liquid pycnometer method and titration method |
|||
** ISO 1183-2:2019 Part 2: Density gradient column method |
|||
** ISO 1183-3:1999 Part 3: Gas pyknometer method |
|||
* ISO 1184:1983 Plastics — Determination of tensile properties of films [Withdrawn: replaced with ISO 527-3] |
|||
* ISO 1185:2003 Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage |
|||
* ISO/R 1186:1970 Pressures in brake lines and braking efficiency [Withdrawn without replacement] |
|||
* ISO 1187:1983 Special wrought copper alloys — Chemical composition and forms of wrought products [Withdrawn without replacement] |
|||
* ISO 1188:1984 Cinematography — Recorded characteristic for magnetic sound on full-coat 16 mm motion-picture film — Specifications |
|||
* ISO 1189:1986 Cinematography — Recorded characteristic for magnetic sound records on 35 mm motion-picture film excluding striped release prints — Specifications |
|||
* ISO 1190 Copper and copper alloys — Code of designation |
|||
** ISO 1190-1:1982 Part 1: Designation of materials |
|||
** ISO 1190-2:1982 Part 2: Designation of tempers |
|||
* ISO 1191:1975 Plastics — Polyethylenes and polypropylenes in dilute solution — Determination of viscosity number and of limiting viscosity number [Withdrawn: replaced with ISO 1628-3] |
|||
<!--what was ISO/R 1192?--> |
|||
* ISO 1193:1973 Butter triers [Withdrawn: replaced with ISO 707] |
|||
* ISO 1194:1973 Cheese triers [Withdrawn: replaced with ISO 707] |
|||
* ISO/R 1195:1970 Plastics — Determination of the water vapour transmission rate of plastics films and thin sheets — Dish method [Withdrawn without replacement] |
|||
<!--what was ISO/R 1196 and ISO/R 1197?--> |
|||
* ISO 1198:1972 Sealed-beam landing lamps for aircraft — Dimensions |
|||
<!--what was ISO/R 1199?--> |
|||
* ISO/R 1200:1971 Cinematography — Labelling of containers for unexposed motion-picture films and magnetic films — Minimum information specifications [Withdrawn: replaced with ISO 3042] |
|||
* ISO 1201:1972 Cinematography — 8 mm motion-picture film with picture — Location and width of magnetic striping and gaps of recording and reproducing magnetic heads for magnetic sound record [Withdrawn without replacement] |
|||
* ISO 1202:1981 Essential oils — Determination of 1,8-cineole content [Withdrawn without replacement] |
|||
* ISO 1203:1998 Photography — Roll film cameras — Back window location |
|||
* ISO 1204:1990 Reciprocating internal combustion engines — Designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine |
|||
* ISO 1205:1972 Reciprocating internal combustion engines — Designation of the cylinders [Withdrawn: replaced with ISO 1204] |
|||
* ISO 1206:2018 Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values |
|||
* ISO 1207:2011 Slotted cheese head screws — Product grade A |
|||
* ISO 1208:1982 Spices and condiments — Determination of filth |
|||
* ISO 1209 Rigid cellular plastics — Determination of flexural properties |
|||
** ISO 1209-1:2007 Part 1: Basic bending test |
|||
** ISO 1209-2:2007 Part 2: Determination of flexural strength and apparent flexural modulus of elasticity |
|||
* ISO 1210:1992 Plastics — Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source [Withdrawn: replaced with IEC 60695-11-10] |
|||
* ISO 1211:2010 Milk — Determination of fat content — Gravimetric method (Reference method) |
|||
* ISO 1212:1995 Apples — Cold storage |
|||
* ISO 1213 Solid mineral fuels – Vocabulary |
|||
** ISO 1213-1:2020 Part 1: Terms relating to coal preparation |
|||
** ISO 1213-2:2016 Part 2: Terms relating to sampling, testing and analysis |
|||
** ISO/R 1213-3 Vocabulary of terms relating to solid mineral fuels — Part 3: Terms relating to coke [Withdrawn: replaced with ISO 1213-2] |
|||
* ISO/R 1214:1971 Counterbalanced fork lift trucks — Rated capacity [Withdrawn without replacement] |
|||
* ISO 1215:2015 Virgin cork, raw reproduction cork, ramassage, gleanings, burnt cork, corkwaste, boiled cork pieces and raw corkwaste — Definitions and packaging |
|||
* ISO 1216:2017 Boiled reproduction cork — Grading, classification and packing |
|||
* ISO 1217:2009 Displacement compressors—Acceptance tests |
|||
* ISO 1218:1975 Plastics — Polyamides — Determination of "melting point" [Withdrawn: replaced with ISO 3146] |
|||
* ISO 1219 Fluid power systems and components – Graphical symbols and circuit diagrams |
|||
** ISO 1219-1:2012 Part 1: Graphical symbols for conventional use and data-processing applications |
|||
** ISO 1219-2:2012 Part 2: Circuit diagrams |
|||
** ISO 1219-3:2016 Part 3: Symbol modules and connected symbols in circuit diagrams |
|||
* ISO/R 1220:1970 Methods of test for heat-resisting (190 °C) electrical cables with copper conductors for aircraft [Withdrawn without replacement] |
|||
<!--what was ISO/R 1221?--> |
|||
* ISO 1222 Photography – Tripod connections |
|||
* ISO 1223:2003 Cinematography — Picture areas for motion-picture films for television — Position and dimensions |
|||
* ISO 1224 Rolling bearings — Instrument precision bearings |
|||
** ISO 1224-1:2007 Part 1: Boundary dimensions, tolerances and characteristics of metric series bearings [Withdrawn without replacement] |
|||
** ISO 1224-2:2007 Part 2: Boundary dimensions, tolerances and characteristics of inch series bearings [Withdrawn without replacement] |
|||
* ISO/R 1225 was merged into ISO/R 1224. |
|||
* ISO/R 1226:1970 Symbolic designation of direction of closing and faces of doors, windows and shutters [Withdrawn without replacement] |
|||
* ISO 1227:1979 Starch, including derivatives and by-products — Vocabulary [Withdrawn without replacement] |
|||
* ISO 1228:1975 Plastics — Poly(ethylene terephthalate) in dilute solution — Determination of viscosity number [Withdrawn: replaced with ISO 1628-5] |
|||
* ISO 1229:1989 Photography — Expendable photoflash lamps — Determination of light output [Withdrawn without replacement] |
|||
* ISO 1230:2007 Photography — Determination of flash guide numbers for electronic flash equipment |
|||
* ISO/R 1231:1970 Seat belt assemblies for motorists [Withdrawn without replacement] |
|||
* ISO 1232:1976 Aluminium oxide primarily used for the production of aluminium — Determination of silica content — Reduced molybdosilicate spectrophotometric method [Withdrawn without replacement] |
|||
* ISO 1233:1975 Plastics — Determination of viscosity number of methyl methacrylate polymers and copolymers in dilute solution [Withdrawn: replaced with ISO 1628-6] |
|||
* ISO 1234:1997 Split pins |
|||
<!--what was ISO/R 1235 and ISO/R 1236?--> |
|||
* ISO 1237:1981 Mustard seed — Specification |
|||
<!--what were ISO/R 1238, ISO/R 1239, and ISO/R 1240?--> |
|||
* ISO 1241:1996 Essential oils — Determination of ester values, before and after acetylation, and evaluation of the contents of free and total alcohols |
|||
* ISO 1242:1999 Essential oils — Determination of acid value |
|||
<!--what were ISO/R 1243, ISO/R 1244, ISO/R 1245, and ISO/R 1246?--> |
|||
* ISO 1247 Aluminium pigments for paints |
|||
** ISO 1247-1:2021 Part 1: General aluminium pigments |
|||
** ISO 1247-2:2021 Part 2: Vacuum metallized aluminium pigments |
|||
* ISO 1248:2006 Iron oxide pigments — Specifications and methods of test |
|||
* ISO 1249:1974 Zinc chromate pigments — Basic zinc potassium chromate pigments and zinc tetrahydroxychromate pigments |
|||
* ISO 1250:1972 Mineral solvents for paints — White spirits and related hydrocarbon solvents |
|||
* ISO/R 1260:1970 Guide to the use of ISO/R 390 "Sampling and inspection of asbestos-cement products" [Withdrawn: replaced with ISO 390] |
|||
* ISO 1264:1980 Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of pH of aqueous extract |
|||
* ISO 1265:2007 Plastics — Poly(vinyl chloride) resins — Determination of number of impurities and foreign particles |
|||
<!--what were ISO/R 1266, and ISO/R 1267?--> |
|||
* ISO 1268 Fibre-reinforced plastics – Methods of producing test plates |
|||
* ISO 1269:2006 Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of volatile matter (including water) |
|||
* ISO 1270:1975 Plastics — PVC resins — Determination of ash and sulphated ash [Withdrawn: replaced with ISO 3451-5] |
|||
* ISO 1271:1983 Essential oils — Determination of carbonyl value — Free hydroxylamine method |
|||
* ISO 1272:2000 Essential oils — Determination of content of phenols |
|||
* ISO 1275:2006 Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors |
|||
* ISO 1279:1996 Essential oils — Determination of carbonyl value — Potentiometric methods using hydroxylammonium chloride |
|||
* ISO/TR 1281 Rolling bearings — Explanatory notes on ISO 281 |
|||
** ISO/TR 1281-1:2021 Part 1: Basic dynamic load rating and basic rating life |
|||
** ISO/TR 1281-2:2008 Part 2: Modified rating life calculation, based on a systems approach to fatigue stresses |
|||
* ISO/R 1283 Brown coals and lignites — Determination of ash [Draft numbered ISO 1016] |
|||
* ISO 1288:2016 Glass in building — Determination of the bending strength of glass |
|||
** ISO 1288-1:2016 Part 1: Fundamentals of testing glass |
|||
** ISO 1288-2:2016 Part 2: Coaxial double-ring test on flat specimens with large test surface areas |
|||
** ISO 1288-3:2016 Part 3: Test with specimen supported at two points (four point bending) |
|||
** ISO 1288-4:2016 Part 4: Testing of channel shaped glass |
|||
** ISO 1288-5:2016 Part 5: Coaxial double ring test on flat specimens with small test surface areas |
|||
* ISO/R 1291 Pesticides — Common names — Ninth series of terms [Draft numbered ISO/R 967] |
|||
* ISO/R 1292 Pesticides — Common names — Eleventh series of terms [Draft numbered ISO/R 969] |
|||
* ISO/R 1295:1970 Paper vocabulary — Fifth series of terms [Withdrawn: Replaced with ISO 4046] |
|||
* ISO 1302:2002 Geometrical Product Specifications (GPS) – Indication of surface texture in technical product documentation [Withdrawn: Replaced with ISO 21920-1] |
|||
* ISO 1304:2016 Rubber compounding ingredients — Carbon black — Determination of iodine adsorption number |
|||
* ISO 1306:1995 Rubber compounding ingredients — Carbon black (pelletized) — Determination of pour density |
|||
* ISO 1307:2006 Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses |
|||
* ISO 1310:1974 Carbon black for use in the rubber industry — Sampling packaged shipments [Withdrawn: Replaced with ISO 1124] |
|||
* ISO/R 1311 Shipbuilding details — Mating dimensions for pipeline flanges for ships [Draft numbered ISO/R 964] |
|||
* ISO/R 1312 Pesticides — Common names — Twelfth series of terms [Draft numbered ISO/R 970] |
|||
* ISO/R 1313 Pesticides — Common names — Thirteenth series of terms [Draft numbered ISO/R 971] |
|||
* ISO 1324:1985 Solid wood parquet — Classification of oak strips |
|||
* ISO 1325:1973 Plastics — Determination of electrical properties of thin sheet and film [Withdrawn without replacement] |
|||
* ISO/R 1326:1970 Plastics — Determination of flammability and burning rate of plastics in the form of film [Withdrawn: Replaced with ISO 9773] |
|||
* ISO 1328 Cylindrical gears — ISO system of flank tolerance classification |
|||
** ISO 1328-1:2013 Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth |
|||
** ISO 1328-2:2020 Part 2: Definitions and allowable values of double flank radial composite deviations |
|||
* ISO/R 1330:1970 Unplasticized polyvinyl chloride (PVC) pipes — Tolerances on outside diameters [Withdrawn: replaced with ISO 3606, now ISO 11922-(1-2)] |
|||
* ISO/DIS 1331, 1332, and 1333 became ISO/R 1164, 1165, and 1166, respectively, meaning these numbers are unused. |
|||
* ISO 1336:1980 Wrought coppers (having minimum copper contents of 97,5 %) — Chemical composition and forms of wrought products [Withdrawn without replacement] |
|||
* ISO 1337:1980 Wrought coppers (having minimum copper contents of 99,85 %) — Chemical composition and forms of wrought products [Withdrawn without replacement] |
|||
* ISO 1338:1977 Cast copper alloys — Composition and mechanical properties [Withdrawn without replacement] |
|||
* ISO 1340:1976 Cylindrical gears — Information to be given to the manufacturer by the purchaser in order to obtain the gear required [Withdrawn without replacement] |
|||
* ISO 1341:1976 Straight bevel gears — Information to be given to the manufacturer by the purchaser in order to obtain the gear required [Withdrawn without replacement] |
|||
* ISO 1342:2012 Essential oil of rosemary (Rosmarinus officinalis L.) |
|||
* ISO 1346:2021 Fibre ropes — Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) — 3-, 4-, 8- and 12-strand ropes |
|||
* ISO 1352:2021 Metallic materials — Torque-controlled fatigue testing |
|||
* ISO/R 1353 Metallic materials — Hardness test — Rockwell superficial test (scales 15N, 30N, 45N, 15T, 30T and 45T) [Draft numbered ISO 1024] |
|||
* ISO 1355:1989 Metallic materials — Hardness test — Calibration of standardized blocks to be used for Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T) [Withdrawn: replaced with ISO 6508-3] |
|||
* ISO/R 1359 Heat-treated steels, alloy steels and free-cutting steels – Part 4: Wrought, quenched, and tempered steels with 1 % chromium and 0.2 % molybdenum and controlled sulphur content [Renamed ISO/R 683-4] |
|||
* ISO/R 1360 Heat-treated steels, alloy steels and free-cutting steels – Part 5: Wrought quenched and tempered manganese steels [Draft renamed ISO/R 683-5] |
|||
* ISO 1361:1997 Light-gauge metal containers — Round open-top cans — Internal diameters |
|||
* ISO/R 1362 Heat-treated steels, alloy steels and free-cutting steels – Part 7: Wrought quenched and tempered chromium steels [Draft renamed ISO/R 683-7] |
|||
* ISO/R 1364 Heat-treated steels, alloy steels and free-cutting steels – Part 9: Wrought free-cutting steels [Draft renamed ISO/R 683-9] |
|||
* ISO/R 1366 Heat-treated steels, alloy steels and free-cutting steels – Part 11: Wrought case hardening steels [Draft renamed ISO/R 683-11] |
|||
* ISO/R 1376 Railway rolling stock material – Rough tyres for trailer stock Dimensions and tolerances [Draft renamed ISO/R 1005-2] |
|||
* ISO/R 1378 Railway rolling stock material – Rolled or forged wheel centres for tyred wheels for trailer stock [Draft renamed ISO/R 1005-4] |
|||
* ISO/R 1379 Railway rolling stock material – Cast wheel centres in non-alloy steel for tyred wheels for trailer stock [Draft renamed ISO/R 1005-5] |
|||
* ISO 1382:2020 Rubber – Vocabulary |
|||
* ISO 1385 Phthalate esters for industrial use — Methods of test |
|||
* ISO 1385-1:1977 Part 1: General |
|||
* ISO 1385-2:1977 Part 2: Measurement of colour after heat treatment (Diallyl phthalate excluded) [Withdrawn without replacement] |
|||
* ISO 1385-3:1977 Part 3: Determination of ash [Withdrawn without replacement] |
|||
* ISO 1385-4:1977 Part 4: Titrimetric method [Withdrawn without replacement] |
|||
* ISO 1385-5:1977 Part 5: Determination of ester content — Titrimetric method after saponification [Withdrawn without replacement] |
|||
* ISO 1386:1983 Solvent acetates for industrial use — Methods of test [Withdrawn without replacement] |
|||
* ISO 1387:1982 Methanol for industrial use — Methods of test [Withdrawn without replacement] |
|||
* ISO 1388 Ethanol for industrial use — Methods of test |
|||
** ISO 1388-1:1981 Part 1: General |
|||
** ISO 1388-2:1981 Part 2: Detection of alkalinity or determination of acidity to phenolphthalein |
|||
** ISO 1388-3:1981 Part 3: Estimation of content of carbonyl compounds present in small amounts — Photometric method |
|||
** ISO 1388-4:1981 Part 4: Estimation of content of carbonyl compounds present in moderate amounts — Titrimetric method |
|||
** ISO 1388-5:1981 Part 5: Determination of aldehydes content — Visual colorimetric method |
|||
** ISO 1388-6:1981 Part 6: Test for miscibility with water |
|||
** ISO 1388-7:1981 Part 7: Determination of methanol content (methanol contents between 0,01 and 0,20 % (V/V)) — Photometric method |
|||
** ISO 1388-8:1981 Part 8: Determination of methanol content (methanol contents between 0,10 and 1,50 % (V/V)) — Visual colorimetric method |
|||
** ISO 1388-9:1981 Part 9: Determination of esters content — Titrimetric method after saponification |
|||
** ISO 1388-10:1981 Part 10: Estimation of hydrocarbons content — Distillation method |
|||
** ISO 1388-11:1981 Part 11: Test for detection of furfural |
|||
** ISO 1388-12:1981 Part 12: Determination of permanganate time |
|||
* ISO 1389 Phthalic anhydride for industrial use — Methods of test |
|||
**ISO 1389-1:1977 Part 1: General [Withdrawn without replacement] |
|||
**ISO 1389-2:1977 Part 2: Measurement of colour of the molten material [Withdrawn without replacement] |
|||
**ISO 1389-3:1977 Part 3: Measurement of colour stability [Withdrawn without replacement] |
|||
**ISO 1389-4:1977 Part 4: Measurement of colour after treatment with sulphuric acid [Withdrawn without replacement] |
|||
**ISO 1389-5:1977 Part 5: Determination of free acidity — Potentiometric method [Withdrawn without replacement] |
|||
**ISO 1389-6:1977 Part 6: Determination of phthalic anhydride content — Titrimetric method [Withdrawn without replacement] |
|||
**ISO 1389-7:1977 Part 7: Determination of maleic anhydride content — Polarographic method [Withdrawn without replacement] |
|||
**ISO 1389-8:1977 Part 8: Determination of ash [Withdrawn without replacement] |
|||
**ISO 1389-9:1977 Part 9: Determination of impurities oxidizable in the cold by potassium permanganate — Iodometric method [Withdrawn without replacement] |
|||
**ISO 1389-10:1977 Part 10: Determination of 1,4- naphthaquinone content — Colorimetric method [Withdrawn without replacement] |
|||
**ISO 1389-11:1977 Part 11: Determination of iron content — 2,2'- Bipyridyl photometric method [Withdrawn without replacement] |
|||
* ISO 1390 Maleic anhydride for industrial use — Methods of test |
|||
**ISO 1390-1:1977 Part 1: General [Withdrawn without replacement] |
|||
**ISO 1390-2:1977 Part 2: Measurement of colour of the molten material [Withdrawn without replacement] |
|||
**ISO 1390-3:1977 Part 3: Determination of free acidity — Potentiometric method [Withdrawn without replacement] |
|||
**ISO 1390-4:1977 Part 4: Determination of maleic anhydride content — Polarographic method [Withdrawn without replacement] |
|||
**ISO 1390-5:1977 Part 5: Determination of ash [Withdrawn without replacement] |
|||
**ISO 1390-6:1977 Part 6: Determination of iron content — 2,2'- Bipyridyl photometric method [Withdrawn without replacement] |
|||
* ISO 1391 Paraformaldehyde for industrial use — Methods of test |
|||
**ISO 1391-1:1976 Part 1: General [Withdrawn without replacement] |
|||
**ISO 1391-2:1976 Part 2: Determination of ash [Withdrawn without replacement] |
|||
**ISO 1391-3:1976 Part 3: Determination of iron content — 2,2'- Bipyridyl photometric method [Withdrawn without replacement] |
|||
**ISO 1391-4:1976 Part 4: Determination of water-insoluble matter [Withdrawn without replacement] |
|||
* ISO 1392:1977 Determination of crystallizing point — General method |
|||
* ISO 1393:1977 Liquid halogenated hydrocarbons for industrial use — Determination of acidity — Titrimetric method [Withdrawn without replacement] |
|||
* ISO 1394:1977 Liquid halogenated hydrocarbons for industrial use — Determination of cloud point [Withdrawn without replacement] |
|||
* ISO 1395:1977 Short pitch transmission precision bush chains and chain wheels [Withdrawn without replacement] |
|||
* ISO 1396:1975 Vulcanized and unvulcanized compounded rubber — Determination of copper content — Zinc diethyldithiocarbamate photometric method [Withdrawn: replaced with ISO 8053] |
|||
* ISO 1397:1975 Compounded rubber — Determination of manganese content — Sodium periodate photometric method [Withdrawn: replaced with ISO 7780] |
|||
* ISO/R 1398:1970 Rubber seals — Joint rings in asbestos-cement water piping [Withdrawn: replaced with ISO 4633] |
|||
* ISO 1399:1982 Rubber, vulcanized — Determination of permeability to gases — Constant volume method [Withdrawn: replaced with ISO 2782] |
|||
* ISO 1400:1975 Vulcanized rubbers of high hardness (85 to 100 IRHD) — Determination of hardness [Withdrawn: replaced with ISO 48, now ISO 48-2] |
|||
* ISO 1401:2016 Rubber hoses for agricultural spraying |
|||
* ISO 1402:2021 Rubber and plastics hoses and hose assemblies – Hydrostatic testing |
|||
* ISO 1403:2019 Rubber hoses, textile-reinforced, for general-purpose water applications — Specification |
|||
* ISO/R 1404:1970 Industrial air hose [Withdrawn: replaced with ISO 2398] |
|||
* ISO 1407:2011 Rubber — Determination of solvent extract |
|||
* ISO 1408:1995 Rubber — Determination of carbon black content — Pyrolytic and chemical degradation methods |
|||
* ISO 1409:2020 Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of surface tension |
|||
* [[ISO 1413]]:2016 Horology – Shock-resistant wrist watches |
|||
* ISO/TR 1417:1974 Automobiles — Anchorages for seat belts [Withdrawn without replacement] |
|||
* ISO 1419:2019 Rubber- or plastics-coated fabrics — Accelerated-ageing tests |
|||
* ISO 1420:2016 Rubber- or plastics-coated fabrics — Determination of resistance to penetration by water |
|||
* ISO 1421:2016 Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
|||
* ISO/R 1428:1971 Fire-refined high-conductivity tough pitch copper refinery shapes [Withdrawn: replaced with ISO 431] |
|||
* ISO/R 1429:1971 Fire-refined tough pitch copper refinery shapes [Withdrawn: replaced with ISO 431] |
|||
* ISO/R 1430:1971 Phosphorus-deoxidized copper — Refinery shapes [Withdrawn: replaced with ISO 431] |
|||
* ISO 1431 Rubber, vulcanized or thermoplastic — Resistance to ozone cracking |
|||
** ISO 1431-1:2012 Part 1: Static and dynamic strain testing |
|||
** ISO 1431-2:1994 Part 2: Dynamic strain test [Withdrawn: replaced with ISO 1431-1] |
|||
** ISO 1431-3:2017 Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers |
|||
* ISO 1432:2021 Rubber, vulcanized or thermoplastic — Determination of low-temperature stiffening (Gehman test) |
|||
* ISO 1433:1995 Rubber, vulcanized — Preferred gradations of properties [Withdrawn without replacement] |
|||
* ISO 1434:2016 Natural rubber in bales — Amount of bale coating — Determination |
|||
* ISO 1435:1996 Rubber compounding ingredients — Carbon black (pelletized) — Determination of fines content |
|||
* ISO 1436:2020 Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification |
|||
* ISO 1437:2017 Rubber compounding ingredients — Carbon black — Determination of sieve residue |
|||
* ISO 1438:2017 Hydrometry – Open channel flow measurement using thin-plate weirs |
|||
* ISO/R 1439 Refractory arch bricks — Dimensions [Draft numbered ISO/R 1145] |
|||
* ISO 1440 Pyrometric reference cones for laboratory use – Specification [Draft numbered ISO/R 1146] |
|||
* ISO 1442:1997 Meat and meat products — Determination of moisture content (Reference method) |
|||
* ISO 1443:1973 Meat and meat products — Determination of total fat content |
|||
* ISO 1444:1996 Meat and meat products — Determination of free fat content |
|||
* ISO 1446:2001 Green coffee — Determination of water content — Basic reference method |
|||
* ISO 1447:1978 Green coffee — Determination of moisture content (Routine method) [Withdrawn without replacement] |
|||
* ISO 1452 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) |
|||
** ISO 1452-1:2009 Part 1: General |
|||
** ISO 1452-2:2009 Part 2: Pipes |
|||
** ISO 1452-3:2009 Part 3: Fittings |
|||
** ISO 1452-4:2009 Part 4: Valves |
|||
** ISO 1452-5:2009 Part 5: Fitness for purpose of the system |
|||
* ISO/R 1453 Adding machines and calculating machines — Numeric section of ten-key keyboards [Draft numbered ISO/R 1092] |
|||
* ISO/R 1454 Adding machines and calculating machines — Keytop and printed or displayed symbols [Draft numbered ISO/R 1093] |
|||
* ISO/R 1455:1969 Adding machines and calculating machines — Classification [Draft numbered ISO/R 1094] |
|||
* ISO 1456:2009 Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium |
|||
* ISO 1457:1974 Metallic coatings — Electroplated coatings of copper plus nickel plus chromium on iron or steel [Withdrawn: replaced with ISO 1456] |
|||
* ISO 1458:2002 Metallic coatings — Electrodeposited coatings of nickel [Withdrawn: replaced with ISO 1456] |
|||
* ISO 1459:1973 Metallic coatings — Protection against corrosion by hot dip galvanizing — Guiding principles [Withdrawn: replaced with ISO 1461] |
|||
* ISO 1460:2020 Metallic coatings — Hot dip galvanized coatings on ferrous materials — Gravimetric determination of the mass per unit area |
|||
* ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
|||
* ISO 1462:1973 Metallic coatings — Coatings other than those anodic to the basis metal — Accelerated corrosion tests — Method for the evaluation of the results [Withdrawn: replaced with ISO 10289] |
|||
* ISO 1463:2021 Metallic and oxide coatings — Measurement of coating thickness — Microscopical method |
|||
* ISO 1464:2018 Aerospace — Tripod jacks — Clearance dimensions |
|||
* ISO 1465:1989 Aircraft — Liquid oxygen replenishment couplings — Mating dimensions |
|||
* ISO 1466:1973 Lever-operated manual switches for aircraft — Performance requirements |
|||
* ISO 1467:1973 General purpose push-pull single-pole circuit-breakers for aircraft — Performance requirements |
|||
* ISO/R 1468:1970 Methods of test for general purpose electrical cables with aluminium or aluminium alloy conductors for aircraft [Withdrawn without replacement] |
|||
* ISO/R 1469:1969 Finishes with the external screw thread for glass containers and gauges for inspection of screw closures [Draft numbered ISO 1115] |
|||
* ISO 1472:1977 Textile machinery and accessories — Cylindrical tubes for draw-twisters — Dimensions and permissible run-out [Withdrawn without replacement] |
|||
* ISO 1478:1999 Tapping screws thread |
|||
* ISO 1479:2011 Hexagon head tapping screws |
|||
* ISO/R 1480:1970 Hexagon head tapping screws — Inch series [Withdrawn without replacement] |
|||
* ISO 1481:2011 Slotted pan head tapping screws |
|||
* ISO 1482:2011 Slotted countersunk (flat) head tapping screws |
|||
* ISO 1483:2011 Slotted raised countersunk (oval) head tapping screws |
|||
* ISO/R 1488 Dimensions of elastometric toroidal sealing rings for pipe-fittings in aircraft (Inch series – Class 1 tolerances) [Draft numbered ISO/R 1077] |
|||
* ISO/R 1489 Dimensions of elastometric toroidal sealing rings for aircraft (Inch series – Class 1 tolerances) [Draft numbered ISO/R 1078] |
|||
* ISO/R 1490:1970 Performance requirements for heat-resisting (260 °C) electrical cables with copper conductors for aircraft [Withdrawn without replacement] |
|||
* ISO/R 1491:1970 Methods of test for heat-resisting (260 °C) electrical cables with copper conductors for aircraft [Withdrawn without replacement] |
|||
* ISO/R 1494 Steel tubes — Butt-welding bends 5D (90° and 180°) [Draft numbered ISO/R 1128] |
|||
* ISO 1496 Series 1 freight containers — Specification and testing |
|||
** ISO 1496-1:2013 Part 1: General cargo containers for general purposes |
|||
** ISO 1496-2:2018 Part 2: Thermal containers |
|||
** ISO 1496-3:2019 Part 3: Tank containers for liquids, gases and pressurized dry bulk |
|||
** ISO 1496-4:1991 Part 4: Non-pressurized containers for dry bulk |
|||
** ISO 1496-5:2018 Part 5: Platform and platform-based containers |
|||
== ISO 1500 – ISO 1999 == |
|||
* ISO 1501:2009 ISO miniature screw threads |
|||
* ISO 1502:1996 ISO general-purpose metric screw threads – Gauges and gauging |
|||
* ISO 1503:2008 Spatial orientation and direction of movement — Ergonomic requirements |
|||
* ISO 1505:1993 Textile machinery — Widths relating to dyeing and finishing machines — Definitions and range of nominal widths |
|||
* ISO 1506:1982 Textile machinery – Dyeing, finishing and allied machinery – Classification and nomenclature [Withdrawn without replacement] |
|||
* ISO/R 1508 Pesticides — Common names — Fourteenth series of terms [Draft numbered ISO/R 1062] |
|||
* ISO 1509:1973 General purpose push-pull three-pole circuit-breakers for aircraft — Performance requirements |
|||
* ISO/R 1511:1970 Protective helmets for road users [Withdrawn without replacement] |
|||
* ISO 1512:1991 Paints and varnishes — Sampling of products in liquid or paste form [Withdrawn: replaced with ISO 15528] |
|||
* ISO 1513:2010 Paints and varnishes — Examination and preparation of test samples |
|||
* ISO 1514:2016 Paints and varnishes — Standard panels for testing |
|||
* ISO 1515:1973 Paints and varnishes — Determination of volatile and non-volatile matter [Withdrawn: replaced with ISO 3251] |
|||
* ISO 1516:2002 Determination of flash/no flash — Closed cup equilibrium method |
|||
* ISO 1517:1973 Paints and varnishes — Surface-drying test — Ballotini method [Withdrawn: replaced with ISO 9117-3] |
|||
* ISO 1518 Paints and varnishes — Determination of scratch resistance |
|||
** ISO 1518-1:2019 Part 1: Constant-loading method |
|||
** ISO 1518-2:2019 Part 2: Variable-loading method |
|||
* ISO 1519:2011 Paints and varnishes — Bend test (cylindrical mandrel) |
|||
* ISO 1520:2006 Paints and varnishes — Cupping test |
|||
* ISO 1521:1973 Paints and varnishes — Determination of resistance to water — Water immersion method [Withdrawn: replaced with ISO 2812-2] |
|||
* ISO 1522:2006 Paints and varnishes — Pendulum damping test |
|||
* ISO 1523:2002 Determination of flash point — Closed cup equilibrium method |
|||
* ISO 1524:2020 Paints, varnishes and printing inks — Determination of fineness of grind |
|||
* ISO 1530:2003 Fishing nets — Description and designation of knotted netting |
|||
* ISO 1531:1973 Fishing nets – Hanging of netting – Basic terms and definitions |
|||
* ISO 1532:1973 Fishing nets – Cutting knotted netting to shape ("tapering") |
|||
* ISO/R 1534:1970 Protective helmets for motor motorists' set belts with retractors [Withdrawn without replacement] |
|||
* ISO 1535:1975 Continuous mechanical handling equipment for loose bulk materials — Troughed belt conveyors (other than portable conveyors) — Belts |
|||
* ISO 1536:1975 Continuous mechanical handling equipment for loose bulk materials — Troughed belt conveyors (other than portable conveyors) — Belt pulleys |
|||
* ISO 1537:1975 Continuous mechanical handling equipment for loose bulk materials — Troughed belt conveyors (other than portable conveyors) — Idlers |
|||
* [[ISO 1538]]:1984 Programming languages – ALGOL 60 |
|||
* ISO/IEC 1539 Information technology – Programming languages – Fortran |
|||
** ISO/IEC 1539-1:2018 Part 1: Base language |
|||
** ISO/IEC 1539-2:2000 Part 2: Varying length character strings |
|||
** ISO/IEC 1539-3:1999 Part 3: Conditional compilation [Withdrawn without replacement] |
|||
* ISO 1540:2006 Aerospace — Characteristics of aircraft electrical systems |
|||
* ISO/R 1542:1971 Nomenclature of terms used in the benzole industry- Part I [Withdrawn: replaced with ISO 1543, now withdrawn without replacement] |
|||
* ISO 1543:1981 Benzole industry — Vocabulary [Withdrawn without replacement] |
|||
* ISO 1546:1981 Procedure for milk recording for cows [Withdrawn without replacement] |
|||
* ISO 1547:1975 Aircraft — Precision fuse-links — General requirements |
|||
* ISO 1548:1976 Aircraft — Precision fuse-links — Type A |
|||
* ISO 1549:1976 Aircraft — Precision fuse-links — Type B |
|||
* ISO 1550:1973 Potassium hydroxide for industrial use — Determination of sodium content — Flame emission spectrophotometric method |
|||
* ISO/R 1551:1970 Potassium hydroxide for industrial use — Determination of sodium content — Gravimetric method using uranyl acetate and magnesium acetate [Withdrawn without replacement] |
|||
* ISO 1552:1976 Liquid chlorine for industrial use — Method of sampling (for determining only the volumetric chlorine content) |
|||
* ISO 1553:1976 Unalloyed copper containing not less than 99,90 % of copper — Determination of copper content — Electrolytic method [Withdrawn without replacement] |
|||
* ISO 1554:1976 Wrought and cast copper alloys — Determination of copper content — Electrolytic method |
|||
* ISO/R 1555:1971 Copper and copper alloy rolled flat products (thickness less than 2,5 mm (0.1 in)) — Tensile test [Withdrawn: replaced with ISO 6892-1] |
|||
* ISO/R 1556:1971 Copper and copper alloy tubes of circular section — Flattening Test [Withdrawn: replaced with ISO 8492] |
|||
* ISO 1559:1995 Dental materials — Alloys for dental amalgam [Withdrawn: replaced with ISO 24234] |
|||
* ISO 1560:1985 Dental mercury [Withdrawn: replaced with ISO 24234] |
|||
* ISO 1561:1995 Dental casting wax [Withdrawn: replaced with ISO 15854] |
|||
* ISO 1562:2004 Dentistry — Casting gold alloys [Withdrawn: replaced with ISO 22674] |
|||
* ISO 1563:1990 Dental alginate impression material [Withdrawn: replaced with ISO 21563] |
|||
* ISO 1564:1995 Dental aqueous impression materials based on agar [Withdrawn: replaced with ISO 21563] |
|||
* ISO 1565:1978 Dental silicate cement (hand mixed) [Withdrawn: replaced with ISO 9917] |
|||
* ISO 1566:1978 Dental zinc phosphate cement [Withdrawn: replaced with ISO 9917] |
|||
* ISO 1567:1999 Dentistry — Denture base polymers [Withdrawn: replaced with ISO 20795-1] |
|||
* ISO 1570:1975 Zinc and zinc alloys — Determination of tin content — Spectrophotometric method [Withdrawn without replacement] |
|||
* ISO/R 1571:1970 Shanks for pneumatic tools and fitting dimensions of chuck bushings — Part II |
|||
* ISO 1572:1980 Tea — Preparation of ground sample of known dry matter content |
|||
* ISO 1573:1980 Tea — Determination of loss in mass at 103 degrees C |
|||
* ISO 1574:1980 Tea — Determination of water extract [Withdrawn: replaced with ISO 9768] |
|||
* ISO 1575:1987 Tea — Determination of total ash |
|||
* ISO 1576:1988 Tea — Determination of water-soluble ash and water-insoluble ash |
|||
* ISO 1577:1987 Tea — Determination of acid-insoluble ash |
|||
* ISO 1578:1975 Tea — Determination of alkalinity of water-soluble ash |
|||
* ISO 1580:2011 Slotted pan head screws — Product grade A |
|||
* ISO 1585:2020 Road vehicles — Engine test code — Net power |
|||
* ISO 1586:1977 Textile machinery and accessories – Shuttles – Terms and designation in relation to the position of the shuttle eye |
|||
* ISO 1587:1975 Gypsum rock for the manufacture of binders — Specifications [Withdrawn without replacement] |
|||
* ISO/R 1588:1971 Binders based on calcium sulphate — Definitions, classification, and nomenclature [Withdrawn without replacement] |
|||
* ISO/R 1589 Rivet shank diameters [Draft numbered ISO 1051] |
|||
* ISO 1592:1977 Urea for industrial use — Determination of nitrogen content — Titrimetric method after distillation [Withdrawn without replacement] |
|||
* ISO 1593:1977 Urea for industrial use — Determination of alkalinity — Titrimetric method [Withdrawn without replacement] |
|||
* ISO 1594:1977 Urea for industrial use — Determination of ash |
|||
* ISO/R 1595:1970 Urea for industrial use — Determination of iron content — 2,2'- Bipyridyl photometric method |
|||
* ISO 1597:1994 Plastics — Unplasticized cellulose acetate — Determination of acetic acid yield [Withdrawn without replacement] |
|||
* ISO 1598:1990 Plastics – Cellulose acetate — Determination of insoluble particles |
|||
* ISO 1599:1990 Plastics — Cellulose acetate — Determination of viscosity loss on moulding |
|||
* ISO 1600:1990 Plastics — Cellulose acetate — Determination of light absorption on moulded specimens produced using different periods of heating |
|||
* ISO 1604:1989 Belt drives — Endless wide V-belts for industrial speed-changers and groove profiles for corresponding pulleys |
|||
* ISO 1607 Positive-displacement vacuum pumps — Measurement of performance characteristics |
|||
** ISO 1607-1:1993 Part 1: Measurement of volume rate of flow (pumping speed) [Withdrawn: replaced with ISO 21360-2] |
|||
** ISO 1607-2:1989 Part 2: Measurement of ultimate pressure [Withdrawn: replaced with ISO 21360-2] |
|||
* ISO 1608 Vapour vacuum pumps — Measurement of performance characteristics |
|||
** ISO 1608-1:1993 Part 1: Measurement of volume rate of flow (pumping speed) |
|||
** ISO 1608-2:1989 Part 2: Measurement of critical backing pressure |
|||
* ISO 1609:2020 Vacuum technology — Dimensions of non-knife edge flanges |
|||
* ISO 1614:1976 Glycerines for industrial use — Samples and test methods — General [Withdrawn without replacement] |
|||
* ISO 1615:1976 Glycerines for industrial use — Determination of alkalinity or acidity — Titrimetric method [Withdrawn without replacement] |
|||
* ISO 1616:1976 Glycerines for industrial use — Determination of sulphated ash — Gravimetric method [Withdrawn without replacement] |
|||
* ISO 1617:1976 Aluminium oxide primarily used for the production of aluminium — Determination of sodium content — Flame emission spectrophotometric method [Withdrawn without replacement] |
|||
* ISO 1618:1976 Aluminium oxide primarily used for the production of aluminium — Determination of vanadium content — N-Benzoyl-N-phenylhydroxylamine photometric method [Withdrawn without replacement] |
|||
* ISO 1619:1976 Cryolite, natural and artificial — Preparation and storage of test samples |
|||
* ISO 1620:1976 Cryolite, natural and artificial — Determination of silica content — Reduced molybdosilicate spectrophotometric method |
|||
* ISO 1622 Plastics — Polystyrene (PS) moulding and extrusion materials |
|||
** ISO 1622-1:2012 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 24022-1] |
|||
** ISO 1622-2:1995 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 24022-2] |
|||
* ISO 1624:2001 Plastics — Vinyl chloride homopolymer and copolymer resins — Sieve analysis in water |
|||
* ISO 1625:1998 Plastics — Polymer dispersions — Determination of non-volatile matter (residue) at specified temperatures [Withdrawn: replaced with ISO 3251] |
|||
* ISO/R 1627:1970 Plastics — Method of test to determine the change in electrical properties of polyethylene due to the migration of plasticizers [Withdrawn without replacement] |
|||
* ISO 1628 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers |
|||
** ISO 1628-1:2021 Part 1: General principles |
|||
** ISO 1628-2:2020 Part 2: Poly(vinyl chloride) resins |
|||
** ISO 1628-3:2010 Part 3: Polyethylenes and polypropylenes |
|||
** ISO 1628-4:1999 Part 4: Polycarbonate (PC) moulding and extrusion materials |
|||
** ISO 1628-5:1998 Part 5: Thermoplastic polyester (TP) homopolymers and copolymers |
|||
** ISO 1628-6:1990 Part 6: Methyl methacrylate polymers |
|||
* [[ISO 1629]]:2013 Rubber and latices – Nomenclature |
|||
* ISO 1634 Wrought copper and copper alloy plate, sheet and strip |
|||
** ISO 1634-1:1987 Part 1: Technical conditions of delivery for plate, sheet and strip for general purposes [Withdrawn without replacement] |
|||
** ISO 1634-2:1987 Part 2: Technical conditions of delivery for plate and sheet for boilers, pressure vessels and heat-exchangers [Withdrawn without replacement] |
|||
** ISO 1634-3:1987 Part 3: Technical conditions of delivery for wrought copper alloy strip for springs [Withdrawn without replacement] |
|||
* ISO 1635:1974 Wrought copper and copper alloys — Round tubes for general purposes — Mechanical properties [Withdrawn without replacement] |
|||
* ISO 1637:1987 Wrought copper and copper alloy rod and bar — Technical conditions of delivery [Withdrawn without replacement] |
|||
* ISO 1638:1987 Wrought copper and copper alloy wire — Technical conditions of delivery [Withdrawn without replacement] |
|||
* ISO 1639:1974 Wrought copper alloys — Extruded sections — Mechanical properties [Withdrawn without replacement] |
|||
* ISO 1640:1974 Wrought copper alloys — Forgings — Mechanical properties [Withdrawn without replacement] |
|||
* ISO 1641 End mills and slot drills |
|||
* ISO 1641-1:2016 Part 1: Milling cutters with cylindrical shanks |
|||
* ISO 1641-2:2011 Part 2: Dimensions and designation of milling cutters with Morse taper shanks |
|||
* ISO 1641-3:2011 Part 3: Dimensions and designation of milling cutters with 7/24 taper shanks |
|||
* ISO 1642:1987 Plastics — Industrial laminated sheets based on thermosetting resins — Specification [Withdrawn without replacement] |
|||
* ISO/R 1646:1970 Rolling bearings — Double row self-aligning ball bearings — Radial internal clearance [Withdrawn: replaced with ISO 5753] |
|||
* ISO/R 1648:1971 Rolling bearings — Radial bearings with shields or seals — Outside diameter tolerances — Normal tolerance class and tolerance class 6 [Withdrawn: Replaced with ISO 492] |
|||
* ISO 1651:1974 Tube drawing mandrels |
|||
* ISO 1652:2011 Rubber latex — Determination of apparent viscosity by the Brookfield test method |
|||
* ISO 1653:1975 Vulcanized rubbers — Determination of compression set under constant deflection at low temperatures [Withdrawn: replaced with ISO 815, later ISO 815-(1-2)] |
|||
* ISO/R 1654:1971 Raw rubber and rubber latex — Determination of copper [Withdrawn: replaced with ISO 8053] |
|||
* ISO 1655:1975 Raw rubber and rubber latex — Determination of manganese content — Potassium periodate photometric method [Withdrawn: replaced with ISO 7780] |
|||
* ISO 1656:2019 Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content |
|||
* ISO 1657:1986 Rubber, raw and rubber latex — Determination of iron content — 1,10-Phenanthroline photometric method |
|||
* ISO 1658:2015 Natural rubber (NR) — Evaluation procedure |
|||
* ISO/R 1659 Layout of multilingual classified vocabularies [Draft numbered ISO/R 1149] |
|||
* ISO 1660:2017 Geometrical product specifications (GPS) – Geometrical tolerancing – Profile tolerancing |
|||
* ISO/R 1661:1971 Technical drawings – Tolerances of form and position – Part IV: Practical examples of indications on drawings. [Withdrawn without replacement] |
|||
* ISO/R 1662:1971 Refrigerating plants — Safety requirements [Withdrawn: replaced with ISO 5149, later ISO 5149-(1-4)] |
|||
* ISO 1663:2007 Rigid cellular plastics – Determination of water vapour transmission properties |
|||
* ISO 1666:1996 Starch — Determination of moisture content — Oven-drying method |
|||
* ISO/TR 1672:1977 Hardware representation of ALGOL basic symbols in the ISO 7- bit coded character set for information processing interchange [Withdrawn without replacement] |
|||
* ISO 1673:1991 Onions — Guide to storage |
|||
* ISO 1675:1985 Plastics — Liquid resins — Determination of density by the pyknometer method |
|||
* ISO 1677:1977 Sealed radioactive sources — General [Withdrawn: replaced with ISO 2919] |
|||
* ISO 1679:1973 Data processing — Implementation of the ISO 7- bit coded character set on punched cards [Withdrawn: replaced with ISO 6586] |
|||
* ISO 1680:2013 Acoustics – Test code for the measurement of airborne noise emitted by rotating electrical machines |
|||
* ISO 1681:1973 Information processing – Unpunched paper cards – Specification |
|||
* ISO 1682:1973 Information processing — 80 columns punched paper cards — Dimensions and location of rectangular punched holes [Withdrawn without replacement] |
|||
* ISO 1683:2015 Acoustics – Preferred reference values for acoustical and vibratory levels |
|||
* ISO 1684:1975 Wire, bar and tube drawing dies — Specifications |
|||
* ISO/R 1685:1971 Shipbuilding details — Multi-purpose chocks of cast steel [Withdrawn without replacement] |
|||
* ISO 1686:1976 Sodium and potassium silicates for industrial use — Samples and methods of test — General |
|||
* ISO 1687:1976 Sodium and potassium silicates for industrial use — Determination of density at 20 degrees C of products in solution — Method using density hydrometer and method using pyknometer [Withdrawn without replacement] |
|||
* ISO 1688:1976 Sodium and potassium silicates for industrial use — Determination of dry matter — Gravimetric method [Withdrawn without replacement] |
|||
* ISO 1689:1976 Sodium and potassium silicates for industrial use — Calculation of the ratio : silicon dioxide/sodium oxide or silicon dioxide/potassium oxide |
|||
* ISO 1690:1976 Sodium and potassium silicates for industrial use — Determination of silica content — Gravimetric method by insolubilization |
|||
* ISO 1691:1976 Sodium and potassium silicates for industrial use — Determination of carbonates content — Gas-volumetric method |
|||
* ISO 1692:1976 Sodium and potassium silicates for industrial use — Determination of total alkalinity — Titrimetric method |
|||
* ISO 1693:1976 Cryolite, natural and artificial — Determination of fluorine content — Modified Willard-Winter method |
|||
* ISO 1694:1976 Cryolite, natural and artificial — Determination of iron content — 1,10- Phenanthroline photometric method |
|||
* ISO 1695:1977 o-Chlorotoluene for industrial use — List of methods of test [Withdrawn without replacement] |
|||
* ISO 1696:1977 p-Chlorotoluene for industrial use — List of methods of test [Withdrawn without replacement] |
|||
* ISO 1697:1977 Chlorobenzene for industrial use — List of methods of test [Withdrawn without replacement] |
|||
* ISO 1698:1977 o-Dichlorobenzene for industrial use — List of methods of test [Withdrawn without replacement] |
|||
* ISO 1699:1977 P-Dichlorobenzene for industrial use — List of methods of test [Withdrawn without replacement] |
|||
* ISO 1700:1988 Cinematography — 8 mm Type S motion-picture raw stock film — Cutting and perforating dimensions |
|||
* ISO 1701 Test conditions for milling machines with table of variable height — Testing of the accuracy |
|||
** ISO 1701-0:1984 Part 0: General introduction [Withdrawn: replaced with ISO 1701-1 and ISO 1701-2] |
|||
** ISO 1701-1:2004 Part 1: Machines with horizontal spindle |
|||
** ISO 1701-2:2004 Part 2: Machines with vertical spindle |
|||
* ISO 1703:2005 Assembly tools for screws and nuts – Designation and nomenclature |
|||
* ISO 1704:2008 Ships and marine technology — Stud-link anchor chains |
|||
* ISO/R 1707:1970 Formic acid for industrial use — Determination of iron content — 2,2'- Bipyridyl photometric method [Withdrawn: replaced with ISO 731-6, now withdrawn without replacement] |
|||
* ISO 1708:1989 Acceptance conditions for general purpose parallel lathes — Testing of the accuracy |
|||
* ISO 1709:2018 Nuclear energy — Fissile materials — Principles of criticality safety in storing, handling and processing |
|||
* ISO/R 1710:1970 Fundamental principles for protection in the design and construction of installations for work on unsealed radioactive materials [Withdrawn without replacement] |
|||
* ISO 1711 Assembly tools for screws and nuts — Technical specifications |
|||
* ISO 1711-1:2019 Part 1: Hand-operated wrenches and sockets |
|||
* ISO 1711-2:2019 Part 2: Machine-operated sockets (impact) |
|||
* ISO/R 1713:1970 Restraining devices for children in motor vehicles |
|||
* ISO 1716:2018 Reaction to fire tests for products — Determination of the gross heat of combustion (calorific value) |
|||
* ISO 1717:1974 Rock drilling — Rotary drill-rods and rotary drill-bits for dry drilling — Connecting dimensions |
|||
* ISO 1718:1991 Rock drilling equipment — Drill rods with tapered connection for percussive drilling |
|||
* ISO 1719:1974 Rock drilling — Extension drill-steel equipment for percussive long-hole drilling — Rope-threaded equipments 7/8 to 1 1/4 in (22 to 32 mm) [Withdrawn: replaced with ISO 10207 and ISO 10208] |
|||
* ISO 1720:1974 Rock drilling — Extension drill-steel equipment for percussive long-hole drilling — Rope-threaded equipments 1 1/2 to 2 in (38 to 51 mm) [Withdrawn: replaced with ISO 10207 and ISO 10208] |
|||
* ISO 1721:1974 Rock drilling — Extension drill-steel equipment for percussive long-hole drilling — Reverse-buttress-threaded equipments 1 1/16 and 1 1/4 in (27 and 32 mm) |
|||
* ISO 1722:1974 Rock drilling — Extension drill-steel equipment for percussive long-hole drilling — Reverse-buttress-threaded equipments 1 1/2 to 2 1/2 in (38 to 64 mm) |
|||
* ISO 1724:2003 Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage |
|||
* ISO 1726 Road vehicles — Mechanical coupling between tractors and semi-trailers |
|||
* ISO 1726-1:2000 Part 1: Interchangeability between tractors and semi-trailers for general cargo |
|||
* ISO 1726-2:2007 Part 2: Interchangeability between low-coupling tractors and high-volume semi-trailers |
|||
* ISO 1726-3:2010 Part 3: Requirements for semi-trailer contact area to fifth wheel |
|||
* ISO/R 1727:1970 Pressures in brake lines and braking efficiency [Draft numbered ISO 1186] |
|||
* ISO 1728:2006 Road vehicles — Pneumatic braking connections between motor vehicles and towed vehicles — Interchangeability |
|||
* ISO 1729:1973 Information processing — Unpunched paper tape — Specification [Withdrawn without replacement] |
|||
* ISO 1730:1980 Dictation equipment – Basic operating requirements |
|||
* ISO/R 1731:1971 Dictation equipment – Classification |
|||
* ISO 1736:2008 Dried milk and dried milk products — Determination of fat content — Gravimetric method (Reference method) |
|||
* ISO 1737:2008 Evaporated milk and sweetened condensed milk — Determination of fat content — Gravimetric method (Reference method) |
|||
* ISO 1738:2004 Butter — Determination of salt content |
|||
* ISO 1739:2006 Butter — Determination of the refractive index of the fat (Reference method) |
|||
* ISO 1740:2004 Milkfat products and butter — Determination of fat acidity (Reference method) |
|||
* ISO 1741:1980 Dextrose — Determination of loss in mass on drying — Vacuum oven method |
|||
* ISO 1742:1980 Glucose syrups — Determination of dry matter — Vacuum oven method |
|||
* ISO 1743:1982 Glucose syrup — Determination of dry matter content — Refractive index method |
|||
* [[ISO 1745]]:1975 Information processing – Basic mode control procedures for data communication systems |
|||
* ISO 1746:1998 Rubber or plastics hoses and tubing — Bending tests [Withdrawn: replaced with ISO 10619-1] |
|||
* ISO 1747:1976 Rubber, vulcanized — Determination of adhesion to rigid plates in shear — Quadruple shear method [Withdrawn: replaced with ISO 1827] |
|||
* ISO/R 1748 Shipbuilding details – Wrought aluminium alloys for use in shipbuilding [Draft numbered ISO/R 1156] |
|||
* ISO 1749:1973 Aircraft — Elastomeric sealing rings — Packaging and identification [Withdrawn without replacement] |
|||
* ISO 1750:1981 Pesticides and other agrochemicals – Common names |
|||
* ISO 1751:2012 Ships and marine technology — Ships' side scuttles |
|||
* ISO 1753:1975 Cinematography — Recording and reproducing head gaps for six-track magnetic sound records on 35 mm motion-picture film containing no picture — Positions and width dimensions [Withdrawn: replaced with ISO 162] |
|||
* ISO 1754:2010 Photography — Cameras using 35 mm film and roll film — Dimensions of picture sizes |
|||
* ISO 1755:1987 Photography — Projector slides — Dimensions |
|||
* ISO 1756:1975 Industrial trucks — Dimensions of stillages — Connection gauge |
|||
* ISO 1757:1996 Personal photographic dosemeters [Withdrawn without replacement] |
|||
* ISO 1758:1976 Direct-reading electroscope-type pocket exposure meters [Withdrawn: replaced with ISO 11934, now withdrawn without replacement] |
|||
* ISO 1759:1976 Indirect-reading capacitor-type pocket exposure meters and accessory electrometers [Withdrawn: replaced with ISO 11934, now withdrawn without replacement] |
|||
* ISO/R 1761:1970 Acoustics — Procedure for describing aircraft noise heard on the ground using spectral analysis [Withdrawn: replaced with ISO 3891, now withdrawn without replacement] |
|||
* ISO 1762:2019 Paper, board, pulps and cellulose nanomaterials — Determination of residue (ash content) on ignition at 525 °C |
|||
* ISO 1763:2020 Textile floor coverings — Determination of number of tufts and/or loops per unit length and per unit area |
|||
* ISO 1764:1975 Textile floor coverings — Determination of mass per unit area of machine made textile floor coverings [Withdrawn: replaced with ISO 8543] |
|||
* ISO 1765:1986 Machine-made textile floor coverings — Determination of thickness |
|||
* ISO 1766:1999 Textile floor coverings — Determination of thickness of pile above the substrate |
|||
* ISO/R 1767:1971 Rubber — Determination of rebound resilience of vulcanizates [Withdrawn: replaced with ISO 4662] |
|||
* ISO 1768:1975 Glass hydrometers – Conventional value for the thermal cubic expansion coefficient (for use in the preparation of measurement tables for liquids) |
|||
* ISO 1769:1975 Laboratory glassware – Pipettes – Colour coding |
|||
* ISO 1770:1981 Solid-stem general purpose thermometers [Withdrawn without replacement] |
|||
* ISO 1771:1981 Enclosed-scale general purpose thermometers [Withdrawn without replacement] |
|||
* ISO 1772:1975 Laboratory crucibles in porcelain and silica |
|||
* ISO 1773:1997 Laboratory glassware — Narrow-necked boiling flasks |
|||
* ISO 1775:1975 Porcelain laboratory apparatus — Requirements and methods of test |
|||
* ISO 1776:1985 Glass — Resistance to attack by hydrochloric acid at 100 degrees C — Flame emission or flame atomic absorption spectrometric method |
|||
* ISO 1780:1984 Cinematography — Motion-picture camera cartridge, 8 mm Type S Model I — Aperture, camera aperture profile, film position, pressure pad and pressure pad flatness — Dimensions and specifications |
|||
* ISO 1781:1983 Cinematography — Projector usage of 8 mm Type S motion-picture film for direct front projection |
|||
* ISO 1783:1973 Magnesium alloys — Determination of zinc — Volumetric method |
|||
* ISO 1784:1976 Aluminium alloys — Determination of zinc — EDTA titrimetric method |
|||
* ISO 1785:1983 Cinematography — Printed 8 mm, Type S, image area on 16 mm motion-picture film perforated 8 mm, Type S (1-4) — Position and dimensions |
|||
* ISO/R 1786:1970 Statistics — Vocabulary and symbols — Second series [Withdrawn: replaced with ISO 3534] |
|||
* ISO 1787:1984 Cinematography — Camera usage of 8 mm Type S motion-picture film — Specifications |
|||
* ISO 1788 Specification for compostable plastics [Rejected draft] |
|||
* ISO 1789:1983 Building construction — Modular co-ordination — Storey heights and room heights for residential buildings [Withdrawn: replaced with ISO 6512, now replaced with ISO 21723] |
|||
* ISO/R 1790:1970 Building construction – Modular co-ordination – Reference lines of horizontal controlling co-ordinating dimensions [Withdrawn: replaced with ISO 2848] |
|||
* ISO 1791:1983 Building construction – Modular co-ordination – Vocabulary [Withdrawn: replaced with ISO 6707-1] |
|||
* ISO 1793:2005 Cinematography — Reels for 16 mm motion-picture projectors (up to and including 610 m capacity: 38 cm size) — Dimensions |
|||
* ISO/R 1794:1971 Cellular plastics and rubbers — Determination of linear dimensions [Withdrawn: replaced with ISO 1923] |
|||
* ISO 1795:2017 Rubber, raw natural and raw synthetic — Sampling and further preparative procedures |
|||
* ISO 1796:1982 Rubber, raw — Sample preparation [Withdrawn: replaced with ISO 1795] |
|||
* ISO 1797:2017 Dentistry — Shanks for rotary and oscillating instruments |
|||
* ISO 1798:2008 Flexible cellular polymeric materials — Determination of tensile strength and elongation at break |
|||
* ISO/R 1799:1971 Dimensions of elastomeric toroidal sealing rings for pipe-fittings in aircraft [Withdrawn without replacement] |
|||
* ISO/R 1800:1971 Dimensions of elastomeric toroidal sealing rings for aircraft [Withdrawn without replacement] |
|||
* ISO 1802:1992 Natural rubber latex concentrate — Determination of boric acid content |
|||
* ISO 1803:1997 Building construction – Tolerances – Expression of dimensional accuracy – Principles and terminology [Withdrawn: replaced with ISO 6707-1] |
|||
* ISO 1804:1972 Doors – Terminology [Withdrawn: replaced with ISO 22496] |
|||
* ISO 1805:2006 Fishing nets — Determination of breaking force and knot breaking force of netting yarns |
|||
* ISO 1806:2002 Fishing nets — Determination of mesh breaking force of netting |
|||
* ISO 1807:1975 Continuous mechanical handling equipment for loose bulk materials — Oscillating conveyors and shaking or reciprocating feeders with rectangular or trapezoidal trough |
|||
* ISO 1809:1977 Textile machinery and accessories – Types of formers for yarn packages – Nomenclature |
|||
* ISO 1810:1976 Copper alloys — Determination of nickel (low contents) — Dimethylglyoxime spectrophotometric method [Withdrawn without replacement] |
|||
* ISO 1811 Copper and copper alloys — Selection and preparation of samples for chemical analysis |
|||
** ISO 1811-1:1988 Part 1: Sampling of cast unwrought products |
|||
** ISO 1811-2:1988 Part 2: Sampling of wrought products and castings |
|||
* ISO 1812:1976 Copper alloys — Determination of iron content — 1,10- Phenanthroline spectrophotometric method |
|||
* ISO 1813:2014 Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Characteristics and methods of test |
|||
* ISO 1815:1975 Continuous mechanical handling equipment for loose bulk materials — Vibrating feeders and conveyors with tubular trough |
|||
* ISO 1816:1975 Continuous mechanical handling equipment for loose bulk materials and unit loads — Belt conveyors — Basic characteristics of motorized driving pulleys |
|||
* ISO 1817:2015 Rubber, vulcanized or thermoplastic — Determination of the effect of liquids |
|||
* ISO 1818:1975 Vulcanized rubbers of low hardness (10 to 35 IRHD) — Determination of hardness [Withdrawn: replaced with ISO 48, now ISO 48-2] |
|||
* ISO 1819:1977 Continuous mechanical handling equipment — Safety code — General rules |
|||
* ISO 1820:1975 Continuous mechanical handling equipment for loose bulk materials — Storage equipment : Storage bins and bunkers, silos and hoppers, bin gates — Safety code [Withdrawn: replaced with ISO 8456] |
|||
* ISO 1821:1975 Continuous mechanical handling equipment for loose bulk materials — Belt feeders and conveyors — Safety code [Withdrawn: replaced with ISO 8456] |
|||
* ISO 1822:1973 Wool — Determination of fibre length using a single-fibre length-measuring machine [Withdrawn: replaced with ISO 6989] |
|||
* ISO 1823:2015 Rubber hose and hose assemblies for oil suction and discharge service — Specification |
|||
* ISO 1825:2017 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling — Specification |
|||
* ISO 1826:1981 Rubber, vulcanized — Time-interval between vulcanization and testing — Specification [Withdrawn: replaced with ISO 471, and later ISO 23529] |
|||
* ISO 1827:2016 Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods |
|||
* ISO 1828:2012 Health informatics – Categorial structure for terminological systems of surgical procedures |
|||
* ISO 1829:1975 Selection of tolerance zones for general purposes [Withdrawn: replaced with ISO 286-1] |
|||
* ISO 1830:2005 Paper, board and pulps — Determination of acid-soluble manganese [Withdrawn: replaced with ISO 12830] |
|||
* ISO 1831:1980 Printing specifications for optical character recognition |
|||
* ISO 1832:2017 Indexable inserts for cutting tools — Designation |
|||
* ISO 1833 Textiles — Quantitative chemical analysis |
|||
** ISO 1833-1:2020 Part 1: General principles of testing |
|||
** ISO 1833-2:2020 Part 2: Ternary fibre mixtures |
|||
** ISO 1833-3:2019 Part 3: Mixtures of acetate with certain other fibres (method using acetone) |
|||
** ISO 1833-4:2017 Part 4: Mixtures of certain protein fibres with certain other fibres (method using hypochlorite) |
|||
** ISO 1833-5:2006 Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate) |
|||
** ISO 1833-6:2018 Part 6: Mixtures of viscose, certain types of cupro, modal or lyocell with certain other fibres (method using formic acid and zinc chloride) |
|||
** ISO 1833-7:2017 Part 7: Mixtures of polyamide with certain other fibres (method using formic acid) |
|||
** ISO 1833-8:2006 Part 8: Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate) |
|||
** ISO 1833-9:2019 Part 9: Mixtures of acetate with certain other fibres (method using benzyl alcohol) |
|||
** ISO 1833-10:2019 Part 10: Mixtures of triacetate or polylactide with certain other fibres (method using dichloromethane) |
|||
** ISO 1833-11:2017 Part 11: Mixtures of certain cellulose fibres with certain other fibres (method using sulfuric acid) |
|||
** ISO 1833-12:2020 Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres with certain other fibres (method using dimethylformamide) |
|||
** ISO 1833-13:2019 Part 13: Mixtures of certain chlorofibres with certain other fibres (method using carbon disulfide/acetone) |
|||
** ISO 1833-14:2019 Part 14: Mixtures of acetate with certain other fibres (method using glacial acetic acid) |
|||
** ISO 1833-15:2019 Part 15: Mixtures of jute with certain animal fibres (method by determining nitrogen content) |
|||
** ISO 1833-16:2019 Part 16: Mixtures of polypropylene fibres with certain other fibres (method using xylene) |
|||
** ISO 1833-17:2019 Part 17: Mixtures of cellulose fibres and certain fibres with chlorofibres and certain other fibres (method using concentrated sulfuric acid) |
|||
** ISO 1833-18:2019 Part 18: Mixtures of silk with other protein fibres (method using sulfuric acid) |
|||
** ISO 1833-19:2006 Part 19: Mixtures of cellulose fibres and asbestos (method by heating) |
|||
** ISO 1833-20:2018 Part 20: Mixtures of elastane with certain other fibres (method using dimethylacetamide) |
|||
** ISO 1833-21:2019 Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates with certain other fibres (method using cyclohexanone) |
|||
** ISO 1833-22:2020 Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell with flax fibres (method using formic acid and zinc chloride) |
|||
** ISO 1833-24:2010 Part 24: Mixtures of polyester and certain other fibres (method using phenol and tetrachloroethane) |
|||
** ISO 1833-25:2020 Part 25: Mixtures of polyester with certain other fibres (method using trichloroacetic acid and chloroform) |
|||
** ISO 1833-26:2020 Part 26: Mixtures of melamine with certain other fibres (method using hot formic acid) |
|||
** ISO 1833-27:2018 Part 27: Mixtures of cellulose fibres with certain other fibres (method using aluminium sulfate) |
|||
** ISO 1833-28:2019 Part 28: Mixtures of chitosan with certain other fibres (method using diluted acetic acid) |
|||
** ISO 1833-29:2020 Part 29: Mixtures of polyamide with polypropylene/polyamide bicomponent (method using sulfuric acid) |
|||
* ISO 1834:1999 Short link chain for lifting purposes — General conditions of acceptance |
|||
* ISO 1835:2018 Round steel short link chains for lifting purposes — Medium tolerance sling chains — Grade 4, stainless steel |
|||
* ISO 1836:1980 Short link chain for lifting purposes — Grade M (4), calibrated, for chain hoists and other lifting appliances [Withdrawn without replacement] |
|||
* ISO 1837:2003 Lifting hooks – Nomenclature |
|||
* ISO 1838:1993 Fresh pineapples — Storage and transport |
|||
* ISO 1839:1980 Tea — Sampling |
|||
* ISO 1840:1976 Definitions of living animals for slaughter — Porcines [Withdrawn without replacement] |
|||
* ISO 1841 Meat and meat products — Determination of chloride content |
|||
** ISO 1841-1:1996 Part 1: Volhard method |
|||
** ISO 1841-2:1996 Part 2: Potentiometric method |
|||
* ISO 1842:1991 Fruit and vegetable products — Determination of pH |
|||
* ISO 1843 Higher alcohols for industrial use — Methods of test (ISO/R 1843:1970 was Higher alcohols for industrial use — measurement of colour in Hazen units) |
|||
* ISO 1843-1:1977 Part 1: General [Withdrawn without replacement] |
|||
* ISO 1843-2:1977 Part 2: Determination of acidity to phenolphthalein — Titrimetric method [Withdrawn without replacement] |
|||
* ISO 1843-3:1977 Part 3: Determination of carbonyl compounds content — Potentiometric method [Withdrawn without replacement] |
|||
* ISO 1843-4:1977 Part 4: Determination of bromine number — Titrimetric method in the presence of mercury(II) chloride [Withdrawn without replacement] |
|||
* ISO 1843-5:1977 Part 5: Determination of total alcohols content — Titrimetric method [Withdrawn without replacement] |
|||
* ISO 1843-6:1977 Part 6: Determination of ash [Withdrawn without replacement] |
|||
* ISO 1843-7:1982 Part 7: Determination of distillation yield [Withdrawn without replacement] |
|||
* ISO 1843-8:1982 Part 8: Sulphuric acid colour test [Withdrawn without replacement] |
|||
* ISO/R 1844:1970 Higher alcohols for industrial use — Determination of density at 20 degrees C [Withdrawn: replaced with ISO 1843-1, now withdrawn without replacement] |
|||
* ISO/R 1845:1970 Higher alcohols for industrial use — Determination of distillation yield [Withdrawn: replaced with ISO 1843-7, now withdrawn without replacement] |
|||
* ISO/R 1846:1970 Higher alcohols for industrial use — Determination of acidity to phenolphthalein — Titrimetric method [Withdrawn: replaced with ISO 1843-2, now withdrawn without replacement] |
|||
* ISO/R 1847:1970 Higher alcohols for industrial use — Determination of carbonyl compounds content — Potentiometric method [Withdrawn: replaced with ISO 1843-3, now withdrawn without replacement] |
|||
* ISO/R 1848:1970 Higher alcohols for industrial use — Determination of bromine number — Titrimetric method in the presence of mercury(II) chloride [Withdrawn: replaced with ISO 1843-4, now withdrawn without replacement] |
|||
* ISO/R 1849:1970 Higher alcohols for industrial use — Determination of water content by the Karl Fischer method [Withdrawn: replaced with ISO 1843-1, now withdrawn without replacement] |
|||
* ISO/R 1850:1970 Higher alcohols for industrial use — Determination of total alcohols content — Titrimetric method [Withdrawn: replaced with ISO 1843-5, now withdrawn without replacement] |
|||
* ISO/R 1851:1970 Higher alcohols for industrial use — Determination of ash [Withdrawn: replaced with ISO 1843-6, now withdrawn without replacement] |
|||
* ISO/R 1852:1970 Higher alcohols for industrial use — Sulphuric acid colour test [Withdrawn: replaced with ISO 1843-8, now withdrawn without replacement] |
|||
* ISO 1853:2018 Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity |
|||
* ISO 1854:2008 Whey cheese — Determination of fat content — Gravimetric method (Reference method) |
|||
* ISO/R 1855:1975 Cellular rubbers – Determination of apparent density [Withdrawn: replaced with ISO 845] |
|||
* ISO 1856:2018 Flexible cellular polymeric materials — Determination of compression set |
|||
* ISO 1858:1977 Information processing – General purpose hubs and reels, with 76 mm (3 in) centrehole, for magnetic tape used in interchange instrumentation applications |
|||
* ISO 1859:1973 Information processing – Unrecorded magnetic tapes for interchange instrumentation applications – General dimensional requirements |
|||
* ISO 1860:1986 Information processing – Precision reels for magnetic tape used in interchange instrumentation applications |
|||
* ISO 1861:1975 Information processing – 7- track, 12,7 mm (0.5 in) wide magnetic tape for information interchange recorded at 8 rpmm (200 rpi) [Withdrawn without replacement] |
|||
* ISO 1862:1975 Information processing – 9- track, 12,7 mm (0.5 in) wide magnetic tape for information interchange recorded at 8 rpmm (200 rpi) [Withdrawn without replacement] |
|||
* ISO/IEC 1863:1990 Information processing – 9-track, 12,7 mm (0,5 in) wide magnetic tape for information interchange using NRZ1 at 32 ftpmm (800 ftpi) – 32 cpmm (800 cpi) |
|||
* ISO/IEC 1864:1992 Information technology – Unrecorded 12,7 mm (0,5 in) wide magnetic tape for information interchange – 32 ftpmm (800 ftpi), NRZ1, 126 ftpmm (3 200 ftpi) phase encoded and 356 ftpmm (9 042 ftpi), NRZ1 |
|||
* ISO 1865:1977 Textile machinery and accessories — Serrated bars for mechanical warp stop motions — Designations of dimensions, and dimensions of cross-section |
|||
* ISO 1866:1975 Pelletized carbon black for use in the rubber industry delivered in bulk or in bins — Specification for maximum fines content [Withdrawn without replacement] |
|||
* ISO 1867:1975 Carbon black for use in the rubber industry — Specification for sieve residue [Withdrawn without replacement] |
|||
* ISO 1868:1982 Rubber compounding ingredients — Carbon black — Specification limits for loss on heating [Withdrawn without replacement] |
|||
* ISO 1869:1977 Methylene chloride for industrial use — List of methods of test [Withdrawn without replacement] |
|||
* ISO 1870:1977 Chloroform for industrial use — List of methods of test [Withdrawn without replacement] |
|||
* ISO 1871:1979 Food and feed products — General guidelines for the determination of nitrogen by the Kjeldahl method |
|||
* ISO 1872 Plastics — Polyethylene (PE) moulding and extrusion materials |
|||
* ISO 1872-1:1993 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 17855-1] |
|||
* ISO 1872-2:2007 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 17855-2] |
|||
* ISO 1873 Plastics — Polypropylene (PP) moulding and extrusion materials |
|||
* ISO 1873-1:1995 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 19069-1] |
|||
* ISO 1873-2:2007 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 19069-2] |
|||
* ISO 1874 Plastics — Polyamide (PA) moulding and extrusion materials |
|||
* ISO 1874-1:2010 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 16396-1] |
|||
* ISO 1874-2:2012 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 16396-2] |
|||
* ISO 1875:1982 Plastics — Plasticized cellulose acetate — Determination of matter extractable by diethyl ether |
|||
* ISO 1876 Swing doors — Dimensioning rules [Rejected draft]<ref name=":0">[https://books.google.com/books?id=td3am9no7owC&q=ISO/DIS+1876 Dimensional Co-ordination in Building Current Trends in ECE Countries; Report–Part 59] (1967). United Nations. Economic Commission for Europe. Committee on Housing, Building and Planning. pg. 84</ref> |
|||
* ISO 1877 Single-leaf wooden swing doors — Principal dimensions [Rejected draft]<ref name=":0" /> |
|||
* ISO 1878:1983 Classification of instruments and devices for measurement and evaluation of the geometrical parameters of surface finish [Withdrawn without replacement] |
|||
* ISO 1879:1981 Instruments for the measurement of surface roughness by the profile method — Vocabulary [Withdrawn without replacement] |
|||
* ISO 1880:1979 Instruments for the measurement of surface roughness by the profile method — Contact (stylus) instruments of progressive profile transformation — Profile recording instruments [Withdrawn: replaced with ISO 3274] |
|||
* ISO 1881:1973 Coke not greater than 60 mm top size — Determination of mechanical strength |
|||
* ISO/R 1882 Vocabulary of terms relating to solid mineral fuels — Part 2: Terms relating to coal sampling and analysis [Draft named ISO/R 1223-2] |
|||
* ISO/R 1883 Vocabulary of terms relating to solid mineral fuels — Part 3: Terms relating to coke [Draft named ISO/R 1223-3] |
|||
* ISO 1886:1990 Reinforcement fibres — Sampling plans applicable to received batches [Withdrawn without replacement] |
|||
* ISO 1887:2014 Textile glass — Determination of combustible-matter content |
|||
* ISO 1888:2022 Textile glass — Staple fibres or filaments — Determination of average diameter |
|||
* ISO 1889:2009 Reinforcement yarns — Determination of linear density |
|||
* ISO 1890:2009 Reinforcement yarns — Determination of twist |
|||
* ISO 1891:2009 Fasteners – Terminology |
|||
** ISO 1891-2:2014 Part 2: Vocabulary and definitions for coatings |
|||
* ISO 1893:2007 Refractory products — Determination of refractoriness under load — Differential method with rising temperature |
|||
* ISO 1894:1979 General purpose Series 1 freight containers — Minimum internal dimensions [Withdrawn: Replaced with ISO 1496-1] |
|||
* ISO/TR 1896:1991 Products in fibre-reinforced cement — Non-combustible fibre-reinforced boards of calcium silicate or cement for insulation and fire protection [Withdrawn without replacement] |
|||
* ISO 1897:1977 Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use — Methods of test (ISO/R 1897 was Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use — Determination of water content by the Karl Fischer method) |
|||
** ISO 1897-1:1977 Part 1: General [Withdrawn without replacement] |
|||
** ISO 1897-2:1977 Part 2: Determination of water — Dean and Stark method [Withdrawn without replacement] |
|||
** ISO 1897-3:1977 Part 3: Determination of neutral oils and pyridine bases [Withdrawn without replacement] |
|||
** ISO 1897-4:1977 Part 4: Visual test for impurities insoluble in sodium hydroxide solution (Excluding cresylic acid and xylenols) [Withdrawn without replacement] |
|||
** ISO 1897-5:1977 Part 5: Visual test for impurities insoluble in water (Phenol only) [Withdrawn without replacement] |
|||
** ISO 1897-6:1977 Part 6: Test for absence of hydrogen sulphide (Cresylic acid and xylenols only) [Withdrawn without replacement] |
|||
** ISO 1897-7:1977 Part 7: Measurement of colour (Cresylic acid and xylenols only) [Withdrawn without replacement] |
|||
** ISO 1897-8:1977 Part 8: Determination of o-cresol content (Cresylic acid and xylenols only) [Withdrawn without replacement] |
|||
** ISO 1897-9:1977 Part 9: Determination of m-cresol content (Cresylic acid only) [Withdrawn without replacement] |
|||
** ISO 1897-10:1982 Part 10: Determination of dry residue after evaporation on a water bath (Excluding cresylic acid and xylenols) [Withdrawn without replacement] |
|||
** ISO 1897-11:1983 Part 11: Determination of crystallizing point (Excluding cresylic acid and xylenols) [Withdrawn without replacement] |
|||
** ISO 1897-12:1983 Part 12: Determination of distillation characteristics (Cresylic acid and xylenols only) [Withdrawn without replacement] |
|||
** ISO 1897-13:1983 Part 13: Determination of residue on distillation (Cresylic acid and xylenols only) [Withdrawn without replacement] |
|||
** ISO/R 1898:1971 Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use — Determination of water — Dean and Stark method [Withdrawn: Replaced with ISO 1897-2] |
|||
** ISO/R 1899:1971 Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use — Determination of neutral oils and pyridine bases [Withdrawn: Replaced with ISO 1897-3] |
|||
** ISO/R 1900:1971 Phenol, o-cresol, m-cresol, and p-cresol for industrial use — Determination of dry residue after evaporation on a water bath [Withdrawn: Replaced with ISO 1897-10] |
|||
** ISO/R 1901:1971 Phenol, o-cresol, m-cresol, and p-cresol for industrial use — Determination of crystallizing point [Withdrawn: Replaced with ISO 1897-11] |
|||
** ISO/R 1902:1971 Phenol, o-cresol, m-cresol, and p-cresol for industrial use — Visual test for impurities insoluble in sodium hydroxide solution [Withdrawn: Replaced with ISO 1897-4] |
|||
** ISO/R 1903:1971 Phenol, m-cresol, cresylic acid and xylenols for industrial use — Determination of density at 20 degrees C [Withdrawn: Replaced with ISO 1897-1] |
|||
* ISO 1904:1972 Liquefied phenol for industrial use — Determination of phenols content — Bromination method [Withdrawn without replacement] |
|||
* ISO/R 1905:1971 Liquefied phenol for industrial use — Visual test for impurities insoluble in water [Withdrawn: Replaced with ISO 1897-5] |
|||
* ISO/R 1906:1971 Cresylic acid and xylenols for industrial use — Determination of distillation characteristics [Withdrawn: Replaced with ISO 1897-12] |
|||
* ISO/R 1907:1971 Cresylic acid and xylenols for industrial use — Determination of residue on distillation [Withdrawn: Replaced with ISO 1897-13] |
|||
* ISO/R 1908:1971 Cresylic acid and xylenols for industrial use — Test for absence of hydrogen sulphide [Withdrawn: Replaced with ISO 1897-6] |
|||
* ISO/R 1909:1971 Cresylic acid and xylenols for industrial use — Measurement of colour [Withdrawn: Replaced with ISO 1897-7] |
|||
* ISO/R 1910:1971 Cresylic acid and xylenols for industrial use — Determination of o-cresol content [Withdrawn: Replaced with ISO 1897-8] |
|||
* ISO/R 1911:1971 Cresylic acid for industrial use — Determination of crystallizing point [Withdrawn: Replaced with ISO 1897-9] |
|||
* ISO/R 1912:1971 Paper vocabulary — Sixth series of terms (Definition of optical properties) [Withdrawn: Replaced with ISO 4046] |
|||
* ISO/R 1913:1971 Formic acid for industrial use — Determination of low contents of other volatile acids — Titrimetric method after distillation [Withdrawn: replaced with ISO 731-7, now withdrawn without replacement] |
|||
* ISO 1914:1972 Boric acid for industrial use — Determination of boric acid content — Volumetric method [Withdrawn without replacement] |
|||
* ISO 1915:1972 Boric oxide for industrial use — Determination of boric oxide content — Volumetric method [Withdrawn without replacement] |
|||
* ISO 1916:1972 Disodium tetraborates for industrial use — Determination of sodium oxide and boric oxide contents and loss on ignition [Withdrawn without replacement] |
|||
* ISO 1917:1972 Hydrated sodium perborates for industrial use — Determination of sodium oxide, boric oxide and available oxygen contents — Volumetric methods [Withdrawn without replacement] |
|||
* ISO 1918:1972 Boric acid, boric oxide, disodium tetraborates and crude sodium borates for industrial use — Determination of sulphur compounds — Volumetric method [Withdrawn without replacement] |
|||
* ISO 1919:1998 Road vehicles — M14 x 1,25 spark-plugs with flat seating and their cylinder head housings [Withdrawn without replacement] |
|||
* ISO 1920 Testing of concrete |
|||
* ISO 1920-1:2004 Part 1: Sampling of fresh concrete |
|||
* ISO 1920-2:2016 Part 2: Properties of fresh concrete |
|||
* ISO 1920-3:2019 Part 3: Making and curing test specimens |
|||
* ISO 1920-4:2020 Part 4: Strength of hardened concrete |
|||
* ISO 1920-5:2018 Part 5: Density and water penetration depth |
|||
* ISO 1920-6:2019 Part 6: Sampling, preparing and testing of concrete cores |
|||
* ISO 1920-7:2004 Part 7: Non-destructive tests on hardened concrete |
|||
* ISO 1920-8:2009 Part 8: Determination of drying shrinkage of concrete for samples prepared in the field or in the laboratory |
|||
* ISO 1920-9:2009 Part 9: Determination of creep of concrete cylinders in compression |
|||
* ISO 1920-10:2010 Part 10: Determination of static modulus of elasticity in compression |
|||
* ISO 1920-11:2013 Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion |
|||
* ISO 1920-12:2015 Part 12: Determination of the carbonation resistance of concrete — Accelerated carbonation method |
|||
* ISO 1920-13:2018 Part 13: Properties of fresh self compacting concrete |
|||
* ISO 1920-14:2019 Part 14: Setting time of concrete mixtures by resistance to penetration |
|||
* ISO 1922:2018 Rigid cellular plastics — Determination of shear properties |
|||
* ISO 1923:1981 Cellular plastics and rubbers — Determination of linear dimensions |
|||
* ISO 1924 Paper and board — Determination of tensile properties |
|||
** ISO 1924-1:1992 Part 1: Constant rate of loading method [Withdrawn without replacement] |
|||
** ISO 1924-2:2008 Part 2: Constant rate of elongation method (20 mm/min) |
|||
** ISO 1924-3:2005 Part 3: Constant rate of elongation method (100 mm/min) |
|||
* ISO 1925:2001 Mechanical vibration — Balancing — Vocabulary [Withdrawn: replaced with ISO 21940-2] |
|||
* ISO 1926:2009 Rigid cellular plastics — Determination of tensile properties |
|||
* ISO 1927 Monolithic (unshaped) refractory products |
|||
** ISO 1927-1:2012 Part 1: Introduction and classification |
|||
** ISO 1927-2:2012 Part 2: Sampling for testing |
|||
** ISO 1927-3:2012 Part 3: Characterization as received |
|||
** ISO 1927-4:2012 Part 4: Determination of consistency of castables |
|||
** ISO 1927-5:2012 Part 5: Preparation and treatment of test pieces |
|||
** ISO 1927-6:2012 Part 6: Measurement of physical properties |
|||
** ISO 1927-7:2012 Part 7: Tests on pre-formed shapes |
|||
** ISO 1927-8:2012 Part 8: Determination of complementary properties |
|||
* ISO 1928:2020 Coal and coke — Determination of gross calorific value |
|||
* ISO 1929:1993 Abrasive belts — Dimensions, tolerances and designation |
|||
* ISO 1938 Geometrical product specifications (GPS) – Dimensional measuring equipment |
|||
** ISO 1938-1:2015 Part 1: Plain limit gauges of linear size |
|||
** ISO 1938-2:2017 Part 2: Reference disk gauges |
|||
* ISO/R 1939:1970 Pneumatic cylinders – cylinder bores and port sizes [Withdrawn without replacement] |
|||
* ISO 1940 Mechanical vibration — Balance quality requirements for rotors in a constant (rigid) state |
|||
** ISO 1940-1:2003 Part 1: Specification and verification of balance tolerances [Withdrawn: replaced with ISO 21940-11] |
|||
** ISO 1940-2:1997 Part 2: Mechanical vibration — Balance quality requirements of rigid rotors — Part 2: Balance errors [Withdrawn: replaced with ISO 21940-14] |
|||
* ISO/R 1941:1970 Flat seal for hydraulic couplings [Withdrawn without replacement] |
|||
* ISO 1942:2020 Dentistry – Vocabulary |
|||
* ISO/R 1943:1970 Coupling Threads for Hydraulic or Pneumatic Piping [Withdrawn: replaced with ISO 1179-(1-4)] |
|||
* ISO/R 1944:1970 Pipe couplings for hydraulic piping (pipe threads) [Withdrawn without replacement] |
|||
* ISO 1946:1976 Textile machinery and accessories — Condenser bobbins for woollen spinning — Dimensions [Withdrawn without replacement] |
|||
* ISO 1947:1973 System of cone tolerances for conical workpieces from C = 1:3 to 1:500 and lengths from 6 to 630 mm [Withdrawn without replacement] |
|||
* ISO 1948:1987 Photography — Front lens barrels up to 127 mm — Dimensions important to the connection of auxiliaries |
|||
* ISO 1949:1987 Aircraft — Electrical connectors — Design requirements |
|||
* ISO 1950:1974 Aircraft — Identification of servicing, maintenance, ground handling and safety/hazard points [Withdrawn without replacement] |
|||
* ISO 1951:2007 Presentation/representation of entries in dictionaries – Requirements, recommendations and information |
|||
* ISO 1952:2008 Solid mineral fuels — Determination of extractable metals in dilute hydrochloric acid |
|||
* ISO 1953:2015 Hard coal — Size analysis by sieving |
|||
* ISO 1954:2013 Plywood — Tolerances on dimensions |
|||
* ISO 1955:1982 Citrus fruits and derived products — Determination of essential oils content (Reference method) |
|||
* ISO 1956 Fruits and vegetables – Morphological and structural terminology |
|||
** ISO 1956-1:1982 (No part title) |
|||
** ISO 1956-2:1989 (No part title) |
|||
* ISO 1957:2000 Machine-made textile floor coverings — Selection and cutting of specimens for physical tests |
|||
* ISO 1958:1973 Textile floor coverings — Determination of mass of total pile yarn per unit area [Withdrawn: replaced with ISO 8543] |
|||
* ISO 1959:1973 Textile floor coverings — Determination of measured surface pile density and measured pile fibre volume ratio [Withdrawn: replaced with ISO 8543] |
|||
* ISO 1963:1973 Aircraft — Interchangeability dimensions of battery connectors for automatic coupling [Withdrawn without replacement] |
|||
* ISO 1964:1987 Shipbuilding – Indication of details on the general arrangement plans of ships |
|||
* ISO 1965:1973 Aluminium terminal ends for crimping to aircraft aluminium electrical cables |
|||
* ISO 1966:1973 Crimped joints for aircraft electrical cables |
|||
* ISO 1967:1974 Aircraft — Fire-resisting electrical cables — Dimensions, conductor resistance and mass |
|||
* ISO 1968:2004 Fibre ropes and cordage – Vocabulary |
|||
* ISO 1969:2004 Fibre ropes — Polyethylene — 3- and 4-strand ropes |
|||
* ISO 1970:1973 Ropes and cordage — Eight-strand plaited manila and sisal ropes [Withdrawn without replacement] |
|||
* ISO 1971:1975 Aircraft — Accessory drives and mounting pads |
|||
* ISO 1973:2021 Textile fibres — Determination of linear density — Gravimetric method and vibroscope method |
|||
* ISO 1974:2012 Paper — Determination of tearing resistance — Elmendorf method |
|||
* ISO 1975:1973 Magnesium and magnesium alloys — Determination of silicon — Spectrophotometric method with the reduced silicomolybdic complex |
|||
* ISO 1976:1975 Zinc alloys — Determination of copper content — Electrolytic method [Withdrawn without replacement] |
|||
* ISO 1977:2006 Conveyor chains, attachments and sprockets |
|||
* ISO 1980:1977 Nitric acid for industrial use — Determination of total acidity — Titrimetric method [Withdrawn without replacement] |
|||
* ISO 1981:1977 Nitric acid for industrial use — Determination of nitrous compounds — Titrimetric method [Withdrawn without replacement] |
|||
* ISO/R 1982:1971 Nitric acid for industrial use — Determination of iron content — 2,2'- Bipyridyl photometric method [Withdrawn without replacement] |
|||
* ISO 1983:1977 Nitric acid for industrial use — Determination of sulphated ash — Gravimetric method [Withdrawn without replacement] |
|||
* ISO 1984 Test conditions for manually controlled milling machines with table of fixed height – Testing of the accuracy |
|||
** ISO 1984-1:2001 Part 1: Machines with horizontal spindle |
|||
** ISO 1984-2:2001 Part 2: Machines with vertical spindle |
|||
* ISO 1985:2015 Machine tools — Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of the accuracy |
|||
* ISO 1986 Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table — Testing of the accuracy |
|||
** ISO 1986-1:2014 Part 1: Machines with table length of up to 1 600 mm |
|||
* ISO 1988:1975 Hard coal — Sampling [Withdrawn: replaced with ISO 18283] |
|||
* [[ISO/IEC 1989]]:2014 Information technology – Programming languages, their environments and system software interfaces – Programming language [[COBOL]] |
|||
* ISO 1990 Fruits – Nomenclature |
|||
** ISO 1990-1:1982 First list |
|||
** ISO 1990-2:1985 Second list |
|||
* ISO 1991 Vegetables – Nomenclature |
|||
** ISO 1991-1:1982 First list |
|||
** ISO 1991-2:1995 Part 2: Second list |
|||
* ISO 1992 Commercial refrigerated cabinets — Methods of test |
|||
** ISO 1992-1:1974 Part 1: Calculation of linear dimensions, areas and volumes [Withdrawn without replacement] |
|||
** ISO 1992-2:1973 Part 2: General test conditions [Withdrawn without replacement] |
|||
** ISO 1992-3:1973 Part 3: Temperature test [Withdrawn without replacement] |
|||
** ISO 1992-4:1974 Part 4: Defrosting test [Withdrawn without replacement] |
|||
** ISO 1992-5:1974 Part 5: Water vapour condensation test [Withdrawn without replacement] |
|||
** ISO 1992-6:1974 Part 6: Electrical energy consumption test [Withdrawn without replacement] |
|||
* ISO 1993 [Draft renamed ISO 1992-2] |
|||
* ISO 1994:1976 Hard coal — Determination of oxygen content [Withdrawn without replacement] |
|||
* ISO 1995:1981 Aromatic hydrocarbons — Sampling |
|||
* ISO 1996 Acoustics – Description, measurement and assessment of environmental noise |
|||
** ISO 1996-1:2016 Part 1: Basic quantities and assessment procedures<ref>{{Cite web|url=https://www.iso.org/standard/59765.html|title=Iso 1996-1:2016}}</ref> |
|||
** ISO 1996-2:2017 Part 2: Determination of sound pressure levels |
|||
* ISO 1997:2018 Granulated cork and cork powder — Classification, properties and packing |
|||
* ISO 1998 Petroleum industry – Terminology |
|||
** ISO 1998-1:1998 Part 1: Raw materials and products |
|||
** ISO 1998-2:1998 Part 2: Properties and tests |
|||
** ISO 1998-3:1998 Part 3: Exploration and production |
|||
** ISO 1998-4:1998 Part 4: Refining |
|||
** ISO 1998-5:1998 Part 5: Transport, storage, distribution |
|||
** ISO 1998-6:2000 Part 6: Measurement |
|||
** ISO 1998-7:1998 Part 7: Miscellaneous terms |
|||
** ISO 1998–99:2000 Part 99: General and index |
|||
* ISO 1999:2013 Acoustics – Estimation of noise-induced hearing loss<ref>{{Cite web|url=https://www.iso.org/standard/45103.html|title=Iso 1999:2013}}</ref> |
|||
== Notes == |
== Notes == |
||
Line 997: | Line 2,528: | ||
{{International Organization for Standardization}} |
{{International Organization for Standardization}} |
||
{{DEFAULTSORT:ISO standards 1-1999}} |
|||
[[Category:Lists of standards|International Organization for Standardization]] |
[[Category:Lists of standards|International Organization for Standardization]] |
||
[[Category:ISO standards| ]] |
[[Category:ISO standards| ]] |
Latest revision as of 23:21, 14 March 2024
This is a list of published[Note 1] International Organization for Standardization (ISO) standards and other deliverables.[Note 2] For a complete and up-to-date list of all the ISO standards, see the ISO catalogue.[1]
The standards are protected by copyright and most of them must be purchased. However, about 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC 1) have been made freely and publicly available.[2]
ISO 1 – ISO 199[edit]
- ISO 1:2016 Geometrical product specifications (GPS) — Standard reference temperature for the specification of geometrical and dimensional properties
- ISO GUIDE 1:1972 Presentation of International Standards and technical reports [Withdrawn without replacement]
- IWA 1:2005 Quality management systems — Guidelines for process improvements in health service organizations [Withdrawn without replacement]
- ISO 2:1973 Textiles — Designation of the direction of twist in yarns and related products
- ISO/IEC GUIDE 2:2004 Standardization and related activities — General vocabulary
- IWA 2:2007 Quality management systems — Guidelines for the application of ISO 9001:2000 in education [Withdrawn without replacement]
- ISO 3:1973 Preferred numbers — Series of preferred numbers
- IWA 3:2005 Image safety — Reducing the incidence of undesirable biomedical effects caused by visual image sequences [Withdrawn without replacement]
- ISO/IEC GUIDE 3:1981 Identification of national standards that are equivalent to International Standards [Withdrawn: replaced with ISO/IEC GUIDE 21:1999, now ISO/IEC GUIDE 21-1:2005 and ISO/IEC GUIDE 21-2:2005]
- ISO 4:1997 Information and documentation — Rules for the abbreviation of title words and titles of publications
- ISO GUIDE 4:1975 Preparation of standard methods of measuring performance of consumer goods (SMMP) [Withdrawn: replaced with ISO/IEC GUIDE 36:1982, now Withdrawn without replacement]
- IWA 4:2009 Quality management systems — Guidelines for the application of ISO 9001:2008 in local government [Withdrawn: replaced with ISO 18091:2014, now ISO 18091:2019]
- ISO 5 Photography and graphic technology — Density measurements
- ISO 5-1:2009 Part 1: Geometry and functional notation
- ISO 5-2:2009 Part 2: Geometric conditions for transmittance density
- ISO 5-3:2009 Part 3: Spectral conditions
- ISO 5-4:2009 Part 4: Geometric conditions for reflection density
- IWA 5:2006 Emergency preparedness [Withdrawn without replacement]
- ISO GUIDE 5:1976 Designation of internationally standardized items [Withdrawn without replacement]
- ISO 6:1993 Photography — Black-and-white pictorial still camera negative film/process systems — Determination of ISO speed
- IWA 6:2008 Guidelines for the management of drinking water utilities under crisis conditions [Withdrawn without replacement]
- ISO GUIDE 6:1977 Mention of reference materials in International Standards [Withdrawn without replacement]
- ISO 7:Pipe threads where pressure-tight joints are made on the threads
- ISO 7-1:1994 Part 1: Dimensions, tolerances and designation
- ISO 7-1:1994/COR 1:2007 Technical Corrigendum 1
- ISO 7-2:2000 Part 2: Verification by means of limit gauges
- ISO 7-1:1994 Part 1: Dimensions, tolerances and designation
- ISO/IEC GUIDE 7:1994 Guidelines for drafting of standards suitable for use for conformity assessment [Withdrawn: replaced with ISO/IEC 17007:2009]
- ISO 8:2019 Information and documentation — Presentation and identification of periodicals. For the 8-bit coded character set, see ISO/IEC 8859
- ISO GUIDE 8:1977 Guidelines for a national standards information centre [Withdrawn without replacement]
- IWA 8:2009 Tableware, giftware, jewellery, luminaries — Glass clarity — Classification and test method [Withdrawn without replacement]
- ISO 9:1995 Information and documentation — Transliteration of Cyrillic characters into Latin characters — Slavic and non-Slavic languages
- ISO GUIDE 9:1976 Courses in standardization [Withdrawn without replacement]
- IWA 9:2011 Framework for managing sustainable development in business districts [Withdrawn without replacement]
- ISO/R 10:1955 Aircraft — Ground air-conditioning connections for pressure cabins [Withdrawn: replaced with ISO 1034]
- ISO GUIDE 10:1977 Registration of standardizing bodies [Withdrawn without replacement]
- ISO 11:1987 Aircraft — Ground pressure testing connections for pressure cabins
- ISO 12:1987 Aerospace — Pipelines — Identification
- ISO 13:1978 Grey iron pipes, special castings and grey iron parts for pressure main lines [Withdrawn without replacement]
- ISO 14:1982 Straight-sided splines for cylindrical shafts with internal centering — Dimensions, tolerances and verification
- ISO 15:2017 Rolling bearings — Radial bearings — Boundary dimensions, general plan
- ISO 16:1975 Acoustics — Standard tuning frequency (Standard musical pitch)
- ISO 17:1973 Guide to the use of preferred numbers and of series of preferred numbers
- ISO 18:1981 Documentation — Contents list of periodicals
- ISO/R 19:1956 Shipbuilding — Inland navigation — Deckbolts [Withdrawn without replacement]
- ISO/R 20:1956 Shipbuilding — Inland navigation — Rivets for Hatches [Withdrawn without replacement]
- ISO 21:1985 Shipbuilding — Inland navigation — Cable-lifters for stud-link anchor chains [Withdrawn without replacement]
- ISO 22:1991 Belt drives — Flat transmission belts and corresponding pulleys — Dimensions and tolerances
- ISO 23:1993 Cinematography — Camera usage of 35 mm motion-picture film — Specifications
- ISO/R 24:1956 Cinematography — Projector usage of 35 mm motion-picture films for direct front projection — Specifications [Withdrawn: replaced with ISO 2939]
- ISO 25:1994 Cinematography — Camera usage of 16 mm motion-picture film — Specifications
- ISO 26:1993 Cinematography — Projector usage of 16 mm motion-picture films for direct front projection — Specifications
- ISO/R 27:1956 Cinematography — Emulsion and sound record positions in camera for 16 mm motion-picture films [Withdrawn without replacement]
- ISO 28:1976 Cinematography — Camera usage of 8 mm Type R motion-picture film — Specifications
- ISO 29:1980 Cinematography — Projector usage of 8 mm Type R silent motion-picture film for direct front projection — Specifications [Withdrawn without replacement]
- ISO/R 30:1956 Bibliographical strip [Withdrawn without replacement]
- ISO 31:Quantities and units [Withdrawn: replaced with ISO/IEC 80000]
- ISO 32:1977 Gas cylinders for medical use — Marking for identification of content
- ISO/R 33:1957 Rubber, vulcanized or thermoplastic — Du Pont constant load method of measuring abrasion resistance of vulcanized natural and synthetic rubbers [Withdrawn without replacement]
- ISO 34 Rubber, vulcanized or thermoplastic — Determination of tear strength measuring abrasion resistance of vulcanized natural and synthetic rubbers
- ISO 34-1:2015 Part 1: Trouser, angle and crescent test pieces
- ISO 34-2:2015 Part 2: Small (Delft) test pieces
- ISO 35:2004 Natural rubber latex concentrate — Determination of mechanical stability
- ISO 36:2020 Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabrics
- ISO 37:2017 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
- ISO/R 38:1957 Shipbuilding — Bollards [Withdrawn without replacement]
- ISO/R 39:1957 Shipbuilding — Anchor Chains — Lugless Joining Shackles [Withdrawn: replaced with ISO 1704]
- ISO/R 40:1957 Shipbuilding — Anchor Chains — Studless Links [Withdrawn: replaced with ISO 1704]
- ISO 41:1980 Shipbuilding — Inland vessels — Covers for deck openings for pumps [Withdrawn without replacement]
- ISO/R 42:1957 Shipbuilding — Inland vessels — Mushroom-type ventilator heads [Withdrawn: replaced by ISO 3372, now withdrawn without replacement]
- ISO 43:2016 Aircraft — Jacking pads
- ISO 44:1975 Aerospace — Lever-operated, two-position, ON/OFF switches — Directions of operation [Withdrawn without replacement]
- ISO 45:1990 Aircraft — Pressure refuelling connections
- ISO 46:1973 Aircraft — Fuel nozzle grounding plugs and sockets
- ISO/R 47:1957 Aircraft — Toilet connections [Withdrawn: replaced with ISO 17775]
- ISO 48 Rubber, vulcanized or thermoplastic — Determination of hardness
- ISO 48-1:2018 Part 1: Introduction and guidance
- ISO 48-2:2018 Part 2: Hardness between 10 IRHD and 100 IRHD
- ISO 48-3:2018 Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale
- ISO 48-4:2018 Part 4: Indentation hardness by durometer method (Shore hardness)
- ISO 48-5:2018 Part 5: Indentation hardness by IRHD pocket meter method
- ISO 48-6:2018 Part 6: Apparent hardness of rubber-covered rollers by IRHD method
- ISO 48-7:2018 Part 7: Apparent hardness of rubber-covered rollers by Shore-type durometer method
- ISO 48-8:2018 Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method
- ISO 48-9:2018 Part 9: Calibration and verification of hardness testers
- ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1
- ISO 50:1977 Metal pipes — Steel sockets screwed according to ISO 7 [Withdrawn without replacement]
- ISO/R 51:1957 Shipbuilding — Inland navigation — Pipe lines for the transport of combustible liquids — nominal diameters [Withdrawn without replacement]
- ISO/R 52:1957 Belt drives — Grooved pulleys — Sections A, B, C, D, and E [Withdrawn: replaced by ISO 4183]
- ISO 53:1998 Cylindrical gears for general and heavy engineering — Standard basic rack tooth profile
- ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering — Modules
- ISO 55:1977 Seedlac — Specification [Withdrawn without replacement]
- ISO 56:1979 Shellac — Specification [Withdrawn without replacement]
- ISO 56-1:1979 Hand-made Shellac — Specification [Withdrawn without replacement]
- ISO 56-2:1979 Machine-made Shellac — Specification [Withdrawn without replacement]
- ISO 57:1975 Bleached lac — Specification [Withdrawn without replacement]
- ISO/R 58:1958 Substances of paper [Withdrawn without replacement]
- ISO 59:1976 Plastics — Determination of acetone-soluble matter [Withdrawn without replacement]
- ISO 60:1977 Plastics — Determination of apparent density of material that can be poured from a specified funnel
- ISO 61:1976 Plastics — Determination of apparent density of moulding material that cannot be poured from a specified funnel
- ISO 62:2008 Plastics — Determination of water absorption
- ISO 63:1975 Flat transmission belts — Lengths [Withdrawn: Replaced with ISO 22]
- ISO 64:1974 Steel tubes — Outside Diameters [Withdrawn: Replaced with ISO 4200]
- ISO 65:1981 Carbon steel tubes suitable for screwing in accordance with ISO 7-1 [Withdrawn without replacement]
- ISO/R 66:1958 Paper vocabulary — First series of terms [Withdrawn: Replaced with ISO 4046]
- ISO 67:1981 Muscovite mica blocks, thins and films — Grading by size [Withdrawn without replacement]
- ISO 68 ISO general-purpose screw threads – Basic profile
- ISO 68-1:1998 Part 1: Metric screw threads
- ISO 68-2:1998 Part 2: Inch screw threads
- ISO 69:1998 Cinematography — 16 mm motion-picture and magnetic film — Cutting and perforating dimensions
- ISO 70:1981 Cinematography — 35 mm negative photographic sound record on 35 mm motion-picture film — Position and maximum width dimensions
- ISO 71:2014 Cinematography — 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film — Positions and dimensions
- ISO/R 72:1958 Cinematography — Sound records and scanning area of 35 mm double width push-pull sound prints — Normal and offset centerline types [Withdrawn without replacement]
- ISO/R 73:1958 Cinematography — Image area produced by camera aperture and maximum projectable image area on 35 mm motion-picture film — Positions and dimensions [Withdrawn: replaced by ISO 2906 and ISO 2907]
- ISO 74:1976 Cinematography — Image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-picture film — Positions and dimensions
- ISO 75 Plastics — Determination of temperature of deflection under load
- ISO 75-1:2020 Part 1: General test method
- ISO 75-2:2013 Part 2: Plastics and ebonite
- ISO 75-3:2004 Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
- ISO 76:2006 Rolling bearings — Static load ratings
- ISO/R 77:1958 Bibliographical references — Essential elements [Withdrawn without replacement]
- ISO 78 Chemistry — Layouts for standards[Note 3]
- ISO 78-2:1999 Part 2: Methods of chemical analysis
- ISO 78-3:1983 Part 3: Standard for molecular absorption spectrometry [Withdrawn without replacement]
- ISO 78-4:1983 Part 4: Standard for atomic absorption spectrometric analysis [Withdrawn without replacement]
- ISO/R 79:1968 Steel — Brinell hardness test [Withdrawn: replaced with ISO 6506-1 and ISO 6506-4]
- ISO/TR 79:2015 Reference materials – Examples of reference materials for qualitative properties
- ISO/R 80:1968 Steel — Rockwell hardness test (B and C scales) [Withdrawn: replaced with ISO 6508]
- ISO/R 81:1967 Steel — Vickers hardness test (Load 5 to 100 kgf) [Withdrawn: replaced with ISO 6507-1 and ISO 6507-4]
- ISO 82:1974 Steel — Tensile testing [Withdrawn: replaced with ISO 6892-1]
- ISO 83:1976 Steel — Charpy impact test (U-notch) [Withdrawn: replaced with ISO 148-1]
- ISO/R 84:1959 Steel — Izod impact test [Withdrawn without replacement]
- ISO/R 85:1959 Steel — Bend test [Withdrawn: replaced with ISO 7438]
- ISO 86:1974 Steel — Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick [Withdrawn: replaced with ISO 6892-1]
- ISO/R 87:1959 Steel — Simple bend testing of sheet and strip less than 3 mm thick [Withdrawn: replaced with ISO 7438]
- ISO/R 88:1959 Steel — Reverse bend testing of sheet and strip less than 3 mm thick [Withdrawn: replaced with ISO 7799]
- ISO 89:1974 Steel — Tensile testing of wire [Withdrawn: replaced with ISO 6892-1]
- ISO 90 Light gauge metal containers — Definitions and determination of dimensions and capacities
- ISO 90-1:1997 Part 1: Open-top cans
- ISO 90-2:1997 Part 2: General use containers
- ISO 90-3:2000 Part 3: Aerosol cans
- ISO 91:2017 Petroleum and related products — Temperature and pressure volume correction factors (petroleum measurement tables) and standard reference conditions
- ISO 92:1976 Textile machinery and accessories — Spinning machinery — Definition of side (left or right)
- ISO 93 Textile machinery and accessories — Cylindrical sliver cans
- ISO 93-1:2006 Part 1: Main dimensions
- ISO 93-2:2006 Part 2: Spring bottoms
- ISO 93-3:1981 Part 3: Packaging sliver cans (press cans) [Withdrawn without replacement]
- ISO 94:1982 Textile machinery and accessories — Spindle gauges for ring-spinning and ring-doubling frames
- ISO/R 95:1972 Textile machinery and accessories — Rings for ring-spinning and ring-doubling frames for "C" travellers [Withdrawn without replacement]
- ISO 96 Textile machinery and accessories — Rings and travellers for ring spinning and ring twisting frames
- ISO 96-1:2016 Part 1: Flange rings T and SF and their travellers
- ISO 96-2:2009 Part 2: HZ- and J-rings and their travellers
- ISO 97:1975 Textile machinery and accessories — Rings for spinning, doubling and twisting for ear-shaped travellers [Withdrawn: replaced with ISO 96-2]
- ISO 98:2001 Textile machinery and accessories — Spinning preparatory and spinning machinery — Main dimensions of coverings for top rollers
- ISO 99:1975 Pulleys for flat transmission belts — Diameters [Withdrawn: replaced with ISO 22]
- ISO 100:1984 Pulleys for flat transmission belts — Crowns [Withdrawn: replaced with ISO 22]
- ISO/R 101:1959 Width of sheets of paper [Withdrawn without replacement]
- ISO 102:1990 Aircraft — Gravity filling orifices
- ISO/R 103:1959 Aircraft — Instrument Cases — Sizes and mounting dimensions [Withdrawn without replacement]
- ISO 104:2015 Rolling bearings — Thrust bearings — Boundary dimensions, general plan
- ISO 105 Textiles — Tests for colour fastness
- ISO 105-A01:2010 Part A01: General principles of testing
- ISO 105-A02:1993 Part A02: Grey scale for assessing change in colour
- ISO 105-A03:2019 Part A03: Grey scale for assessing staining
- ISO 105-A04:1989 Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics
- ISO 105-A05:1996 Part A05: Instrumental assessment of change in colour for determination of grey scale rating
- ISO 105-A06:1995 Part A06: Instrumental determination of 1/1 standard depth of colour
- ISO 105-A08:2001 Part A08: Vocabulary used in colour measurement
- ISO 105-A11:2012 Part A11: Determination of colour fastness grades by digital imaging techniques
- ISO 105-B01:2014 Part B01: Colour fastness to light: Daylight
- ISO 105-B02:2014 Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
- ISO 105-B03:2017 Part B03: Colour fastness to weathering: Outdoor exposure
- ISO 105-B04:1994 Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test
- ISO 105-B05:1993 Part B05: Detection and assessment of photochromism
- ISO 105-B06:2020 Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
- ISO 105-B07:2009 Part B07: Colour fastness to light of textiles wetted with artificial perspiration
- ISO 105-B08:1995 Part B08: Quality control of blue wool reference materials 1 to 7
- ISO 105-B10:2011 Part B10: Artificial weathering — Exposure to filtered xenon-arc radiation
- ISO 105-C01:1989 Part C01: Colour fastness to washing: Test 1 [Withdrawn: replaced with ISO 105-C10]
- ISO 105-C02:1989 Part C02: Colour fastness to washing: Test 2 [Withdrawn: replaced with ISO 105-C10]
- ISO 105-C03:1989 Part C03: Colour fastness to washing: Test 3 [Withdrawn: replaced with ISO 105-C10]
- ISO 105-C04:1989 Part C04: Colour fastness to washing: Test 4 [Withdrawn: replaced with ISO 105-C10]
- ISO 105-C05:1989 Part C05: Colour fastness to washing: Test 5 [Withdrawn: replaced with ISO 105-C10]
- ISO 105-C06:2010 Part C06: Colour fastness to domestic and commercial laundering
- ISO 105-C07:1999 Part C07: Colour fastness to wet scrubbing of pigment printed textiles
- ISO 105-C08:2010 Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator
- ISO 105-C09:2001 Part C09: Colour fastness to domestic and commercial laundering — Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator
- ISO 105-C10:2006 Part C10: Colour fastness to washing with soap or soap and soda
- ISO 105-C12:2004 Part C12: Colour fastness to industrial laundering
- ISO 105-D01:2010 Part D01: Colour fastness to drycleaning using perchloroethylene solvent
- ISO 105-D02:2016 Part D02: Colour fastness to rubbing: Organic solvents
- ISO 105-E01:2013 Part E01: Colour fastness to water
- ISO 105-E02:2013 Part E02: Colour fastness to sea water
- ISO 105-E03:2010 Part E03: Colour fastness to chlorinated water (swimming-pool water)
- ISO 105-E04:2013 Part E04: Colour fastness to perspiration
- ISO 105-E05:2010 Part E05: Colour fastness to spotting: Acid
- ISO 105-E06:2006 Part E06: Colour fastness to spotting: Alkali
- ISO 105-E07:2010 Part E07: Colour fastness to spotting: Water
- ISO 105-E08:1994 Part E08: Colour fastness to hot water
- ISO 105-E09:2010 Part E09: Colour fastness to potting
- ISO 105-E10:1994 Part E10: Colour fastness to decatizing
- ISO 105-E11:1994 Part E11: Colour fastness to steaming
- ISO 105-E12:2010 Part E12: Colour fastness to milling: Alkaline milling
- ISO 105-E13:1994 Part E13: Colour fastness to acid-felting: Severe
- ISO 105-E14:1994 Part E14: Colour fastness to acid-felting: Mild
- ISO 105-E16:2006 Part E16: Colour fastness to water spotting on upholstery fabrics
- ISO 105-F01:2001 Part F01: Specification for wool adjacent fabric
- ISO 105-F02:2009 Part F02: Specification for cotton and viscose adjacent fabrics
- ISO 105-F03:2001 Part F03: Specification for polyamide adjacent fabric
- ISO 105-F04:2001 Part F04: Specification for polyester adjacent fabric
- ISO 105-F05:2001 Part F05: Specification for acrylic adjacent fabric
- ISO 105-F06:2000 Part F06: Specification for silk adjacent fabric
- ISO 105-F07:2001 Part F07: Specification for secondary acetate adjacent fabric
- ISO 105-F09:2009 Part F09: Specification for cotton rubbing cloth
- ISO 105-F10:1989 Part F10: Specification for adjacent fabric: Multifibre
- ISO 105-G01:2016 Part G01: Colour fastness to nitrogen oxides
- ISO 105-G02:1993 Part G02: Colour fastness to burnt-gas fumes
- ISO 105-G03:1993 Part G03: Colour fastness to ozone in the atmosphere
- ISO 105-G04:2016 Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humidities
- ISO 105-J01:1997 Part J01: General principles for measurement of surface colour
- ISO 105-J02:1997 Part J02: Instrumental assessment of relative whiteness
- ISO 105-J03:2009 Part J03: Calculation of colour differences
- ISO 105-J05:2007 Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02)
- ISO 105-N01:1993 Part N01: Colour fastness to bleaching: Hypochlorite
- ISO 105-N02:1993 Part N02: Colour fastness to bleaching: Peroxide
- ISO 105-N03:1993 Part N03: Colour fastness to bleaching: Sodium chlorite (mild)
- ISO 105-N04:1993 Part N04: Colour fastness to bleaching: Sodium chlorite (severe)
- ISO 105-N05:1993 Part N05: Colour fastness to stoving
- ISO 105-P01:1993 Part P01: Colour fastness to dry heat (excluding pressing)
- ISO 105-P02:2002 Part P02: Colour fastness to pleating: Steam pleating
- ISO 105-S01:1993 Part S01: Colour fastness to vulcanization: Hot air
- ISO 105-S02:1993 Part S02: Colour fastness to vulcanization: Sulfur monochloride
- ISO 105-S03:1993 Part S03: Colour fastness to vulcanization: Open steam
- ISO 105-X01:1993 Part X01: Colour fastness to carbonizing: Aluminium chloride
- ISO 105-X02:1993 Part X02: Colour fastness to carbonizing: Sulfuric acid
- ISO 105-X03:1987 Part X03: Colour fastness to chlorination [Withdrawn without replacement]
- ISO 105-X04:1994 Part X04: Colour fastness to mercerizing
- ISO 105-X05:1994 Part X05: Colour fastness to organic solvents
- ISO 105-X06:1994 Part X06: Colour fastness to soda boiling
- ISO 105-X07:1994 Part X07: Colour fastness to cross-dyeing: Wool
- ISO 105-X08:1994 Part X08: Colour fastness to degumming
- ISO 105-X09:1993 Part X09: Colour fastness to formaldehyde
- ISO 105-X10:1993 Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings
- ISO 105-X11:1994 Part X11: Colour fastness to hot pressing
- ISO 105-X12:2016 Part X12: Colour fastness to rubbing
- ISO 105-X13:1994 Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting
- ISO 105-X14:1994 Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate
- ISO 105-X16:2016 Part X16: Colour fastness to rubbing — Small areas
- ISO 105-X18:2007 Part X18: Assessment of the potential to phenolic yellowing of materials
- ISO 105-X19:2020 Part X19: Colour fastness to rubbing (Gakushin test method)
- ISO 105-Z01:1993 Part Z01: Colour fastness to metals in the dye-bath: Chromium salts
- ISO 105-Z02:1993 Part Z02: Colour fastness to metals in the dye-bath: Iron and copper
- ISO 105-Z03:1996 Part Z03: Intercompatibility of basic dyes for acrylic fibres
- ISO 105-Z04:1995 Part Z04: Dispersibility of disperse dyes
- ISO 105-Z05:1996 Part Z05: Determination of the dusting behaviour of dyes
- ISO 105-Z06:1998 Part Z06: Evaluation of dye and pigment migration
- ISO 105-Z07:1995 Part Z07: Determination of application solubility and solution stability of water-soluble dyes
- ISO 105-Z08:1995 Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes
- ISO 105-Z09:1995 Part Z09: Determination of cold water solubility of water-soluble dyes
- ISO 105-Z10:1997 Part Z10: Determination of relative colour strength of dyes in solution
- ISO 105-Z11:1998 Part Z11: Evaluation of speckiness of colorant dispersions
- ISO/R 106:1959 Shipbuilding — Light metal rivets — Diameters and clearances [Withdrawn without replacement]
- ISO/R 107:1959 Shipbuilding — Light metal rivets — Ship heads [Withdrawn without replacement]
- ISO 108:1976 Textile machinery and accessories — Weaving looms — Definition of left and right sides
- ISO 109:1982 Textile machinery — Working widths of weaving machines
- ISO 110:1978 Textile machinery and accessories — Cones for yarn winding (cross wound) — Half angle of the cone 9 degrees 15' [Withdrawn without replacement]
- ISO 111:1978 Textile machinery and accessories — Cones for yarn winding (cross wound) — Half angle of the cone 4 degrees 20' [Withdrawn: Replaced with ISO 8489-3]
- ISO 112:1983 Textile machinery and accessories — Cones for yarn winding (cross wound) — Half angle of the cone 3 degrees 30' [Withdrawn: Replaced with ISO 8489-2]
- ISO 113:2010 Rolling bearings — Plummer block housings — Boundary dimensions
- ISO 114:1980 Unalloyed magnesium ingots — Chemical composition [Withdrawn: replaced with ISO 8287]
- ISO 115:2003 Unalloyed aluminium ingots for remelting — Classification and composition
- ISO/R 116:1959 Pesticides — Common names — First series of terms [Withdrawn: replaced with ISO 1750]
- ISO/R 117:1959 Plastics — Polystyrene — Determination of boiling water absorption [Withdrawn: replaced with ISO 62]
- ISO 118:1976 Plastics — Polystyrene — Determination of methanol-soluble matter [Withdrawn without replacement]
- ISO 119:1977 Plastics — Phenol-formaldehyde mouldings — Determination of free phenols — Iodometric method
- ISO 120:1977 Plastics — Phenol-formaldehyde mouldings — Determination of free ammonia and ammonium compounds — Colorimetric comparison method
- ISO 121:1980 Magnesium-aluminium-zinc alloy ingots and alloy castings — Chemical composition and mechanical properties of sand cast reference test bars [Withdrawn: replaced with ISO 16220]
- ISO/R 122:1959 Composition of magnesium-aluminium-zinc alloy ingots for casting purposes [Withdrawn: replaced with ISO 121, and later ISO 16220]
- ISO 123:2001 Rubber latex — Sampling
- ISO 124:2014 Latex, rubber — Determination of total solids content
- ISO 125:2020 Natural rubber latex concentrate — Determination of alkalinity
- ISO 126:2005 Natural rubber latex concentrate — Determination of dry rubber content
- ISO 127:2018 Rubber, natural latex concentrate — Determination of KOH number
- ISO 128 Technical product documentation — General principles of representation[Note 3]
- ISO 129 Technical product documentation — Indication of dimensions and tolerances[Note 3]
- ISO 129-1:2018 Part 1: General principles
- ISO 129-4:2013 Part 4: Dimensioning of shipbuilding drawings
- ISO 129-5:2018 Part 5: Dimensioning of structural metal work
- ISO/R 130:1959 Aircraft — Colour identification of mechanical control circuits [Withdrawn without replacement]
- ISO 131:1979 Acoustics — Expression of physical and subjective magnitudes of sound or noise in air [Withdrawn without replacement]
- ISO 132:2017 Rubber, vulcanized or thermoplastic — Determination of flex cracking and crack growth (De Mattia)
- ISO 133:1983 Rubber, vulcanized — Determination of crack growth (De Mattia) [Withdrawn: replaced with ISO 132]
- ISO 134:1973 Plain end steel tubes for general purposes [Withdrawn: replaced with ISO 4200]
- ISO/R 135:1959 Paper vocabulary — Second series of terms [Withdrawn: replaced with ISO 4046]
- ISO 136:1972 Steel — Simple torsion testing of wire [Withdrawn: replaced with ISO 7800]
- ISO 137:2015 Wool — Determination of fibre diameter — Projection microscope method
- ISO/R 138:1960 Textiles — Universal yarn count system [Withdrawn: replaced with ISO 1144]
- ISO 139:2005 Textiles — Standard atmospheres for conditioning and testing
- ISO 140 Acoustics — Measurement of sound insulation in buildings and of building elements
- ISO 140-1:1997 Part 1: Requirements for laboratory test facilities with suppressed flanking transmission [Withdrawn: replaced with ISO 10140-(1–5)]
- ISO 140-2:1991 Part 2: Determination, verification and application of precision data [Withdrawn: replaced with ISO 12999-1:2014]
- ISO 140-3:1995 Part 3: Laboratory measurements of airborne sound insulation of building elements [Withdrawn: replaced with ISO 10140-(1–5)]
- ISO 140-4:1998 Part 4: Field measurements of airborne sound insulation between rooms [Withdrawn: replaced with ISO 16283-1:2014]
- ISO 140-5:1998 Part 5: Field measurements of airborne sound insulation of façade elements and façades [Withdrawn: replaced with ISO 16283-(1,3):2014]
- ISO 140-6:1998 Part 6: Laboratory measurements of impact sound insulation of floors [Withdrawn: replaced with ISO 10140-(1–5)]
- ISO 140-7:1998 Part 7: Field measurements of impact sound insulation of floors [Withdrawn: replaced with ISO 16283-(1–2)]
- ISO 140-8:1997 Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor [Withdrawn: replaced with ISO 10140-(1–5)]
- ISO 140-9:1985 Part 9: Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it [Withdrawn: replaced with ISO 10848-2]
- ISO 140-10:1991 Part 10: Laboratory measurement of airborne sound insulation of small building elements [Withdrawn: replaced with ISO 10140-(1–5)]
- ISO 140-11:1991 Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors [Withdrawn: replaced with ISO 10140-(1–5)]
- ISO 140-12:2000 Part 12: Laboratory measurement of room-to-room airborne and impact sound insulation of an access floor [Withdrawn: replaced with ISO 10848-2]
- ISO/TR 140-13:1997 Part 13: Guidelines [Withdrawn: replaced with ISO 140-14]
- ISO 140-14:2004 Part 14: Guidelines for special situations in the field [Withdrawn: replaced with ISO 16283-1:2014]
- ISO 140-16:2006 Part 16: Laboratory measurement of the sound reduction index improvement by additional lining [Withdrawn: replaced with ISO 10140-(1–5)]
- ISO 140-18:2006 Part 18: Laboratory measurement of sound generated by rainfall on building elements [Withdrawn: replaced with ISO 10140-(1,5):2016]
- ISO 141:1976 Textile machinery and accessories — Pirn winders and cross winders — Definition of left and right sides
- ISO 142:1976 Textile machinery and accessories — Weaving preparatory machines — Definition of left and right sides
- ISO 143:1977 Textile machinery and accessories — Weft pirns for automatic looms [Withdrawn without replacement]
- ISO 144:1973 Steel — Reverse bend testing of wire [Withdrawn: replaced with ISO 7801]
- ISO/R 145:1960 Steel — Wrapping test for wire [Withdrawn: replaced with ISO 7802]
- ISO 146:1984 Metallic materials — Hardness test — Verification of Vickers hardness testing machines HV 0,2 to HV 100 [Withdrawn: replaced with ISO 6507-2]
- ISO 146-2:1993 Metallic materials — Verification of Vickers hardness testing machines — Part 2: Less than HV 0,2 [Withdrawn: replaced with ISO 6507-2]
- ISO/R 147:1960 Load calibration of testing machines for tensile testing of steel [Withdrawn: replaced with ISO 7500-1]
- ISO 148 Metallic materials — Charpy pendulum impact test
- ISO 148-1:2016 Part 1: Test method
- ISO 148-2:2016 Part 2: Verification of testing machines
- ISO 148-3:2016 Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
- ISO/R 149:1960 Modified Erichsen cupping test for steel sheet and strip [Withdrawn: replaced with ISO 8490]
- ISO 150:2018 Raw, refined and boiled linseed oil for paints and varnishes — Specifications and methods of test
- ISO 151:1974 Shipbuilding details — Marking of hatchway beams [Withdrawn without replacement]
- ISO/R 152:1960 Shipbuilding details — Marking of wooden hatchway covers [Withdrawn without replacement]
- ISO/R 153:1960 Shipbuilding details — Ordinary Glasses for scuttles and lights — Dimensions [Withdrawn without replacement]
- ISO/R 154: Shipbuilding details — Marking of rolled, drawn and extruded products in light metals or in light alloys [Withdrawn without replacement]
- ISO 155:2019 Belt drives — Pulleys — Limiting values for adjustment of centres
- ISO 156:1982 Metallic materials — Hardness test — Verification of Brinell hardness testing machines [Withdrawn: replaced with ISO 6506-2]
- ISO 157:1996 Coal — Determination of forms of sulfur
- ISO/R 158:1960 Coal — Determination of ash [Withdrawn: replaced with ISO 1171]
- ISO/R 159:1960 Coal — Determination of total sulfur by the Strambi method [Withdrawn without replacement]
- ISO 160:1980 Asbestos-cement pressure pipes and joints [Withdrawn without replacement]
- ISO 161 Thermoplastics pipes for the conveyance of fluids — Nominal outside diameters and nominal pressures
- ISO 161-1:2018 Part 1: Metric series
- ISO 161-2:1996 Part 2: Inch-based series
- ISO 162:1985 Cinematography — Head gaps and sound records for three-, four-, or six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-picture film containing no picture — Positions and width dimensions
- ISO/R 163:1960 Cinematography — Magnetic striping of 16 mm film perforated along both edges [Withdrawn without replacement]
- ISO/R 164:1960 Aluminium and aluminium alloys — Castings — Chemical composition [Withdrawn: replaced with ISO 3522]
- ISO/R 165:1960 Metallic materials — Steel tubes — Flanging test [Withdrawn: replaced with ISO 8494]
- ISO/R 166:1960 Metallic materials — Steel tubes — Drift expanding test [Withdrawn: replaced with ISO 8493]
- ISO/R 167:1960 Metallic materials — Steel tubes — Bend test [Withdrawn: replaced with ISO 8491]
- ISO/R 168:1960 Stretchers [Withdrawn without replacement]
- ISO/R 169:1960 Sizes of photocopies (on paper) readable without optical devices [Withdrawn without replacement]
- ISO/R 170:1960 Shipbuilding — Anchor Chains — Stud links [Withdrawn: replaced with ISO 1704]
- ISO 171:1980 Plastics — Determination of bulk factor of moulding materials
- ISO 172:1978 Plastics — Phenol-formaldehyde mouldings — Detection of free ammonia
- ISO/R 173:1961 Plastics — Determination of the percentage of styrene in polystyrene with Wijs solution [Withdrawn without replacement]
- ISO 174:1974 Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of viscosity number in dilute solution [Withdrawn: replaced with ISO 1628-2]
- ISO 175:2010 Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals
- ISO 176:2005 Plastics — Determination of loss of plasticizers — Activated carbon method
- ISO 177:2016 Plastics — Determination of migration of plasticizers
- ISO 178:2019 Plastics — Determination of flexural properties
- ISO 179 Plastics — Determination of Charpy impact properties
- ISO 179-1:2010 Part 1: Non-instrumented impact test
- ISO 179-2:2020 Part 2: Instrumented impact test
- ISO 180:2019 Plastics — Determination of Izod impact strength
- ISO 181:1981 Plastics — Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod [Withdrawn without replacement]
- ISO 182 Plastics — Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures
- ISO 182-1:1990 Part 1: Congo red method
- ISO 182-2:1990 Part 2: pH method
- ISO 182-3:1993 Part 3: Conductometric method
- ISO 182-4:1993 Part 4: Potentiometric method
- ISO 183:1976 Plastics — Qualitative evaluation of the bleeding of colorants [Withdrawn without replacement]
- ISO/R 184:1961 Grey cast irons — Brinell hardness test [Withdrawn without replacement]
- ISO 185:2020 Grey cast irons — Classification
- ISO 186:2002 Paper and board — Sampling to determine average quality
- ISO 187:1990 Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
- ISO 188:2011 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
- ISO/R 189:1961 Principles of operation of standards marks [Withdrawn without replacement]
- ISO/R 190:1961 Tensile testing of light metals and their alloys [Withdrawn: replaced with ISO 6892-1]
- ISO/R 191:1971 Brinell hardness test for light metals and their alloys [Withdrawn: replaced with ISO 6506-1 and ISO 6506-4]
- ISO/R 192:1971 Wickers hardness test for light metals and their alloys [Withdrawn: replaced with ISO 6507-1 and ISO 6507-4]
- ISO/R 193:1961 Microcopies on transparent bases: sizes of recommended bases [Withdrawn without replacement]
- ISO 194:1981 Plastics — List of equivalent terms [Withdrawn: replaced with ISO 472]
- ISO/R 195:1961 Copper and copper alloys — Drift expanding test [Withdrawn: replaced with ISO 8493]
- ISO 196:1978 Wrought copper and copper alloys — Detection of residual stress — Mercury(I) nitrate test
- ISO 197 Copper and copper alloys — Terms and definitions
- ISO 197-1:1983 Part 1: Materials
- ISO 197-2:1983 Part 2: Unwrought products (Refinery shapes)
- ISO 197-3:1983 Part 3: Wrought products
- ISO 197-4:1983 Part 4: Castings
- ISO 197-5:1980 Part 5: Methods of processing and treatment
- ISO/R 198:1961 Double-deck flat pallets for through transit of goods [Withdrawn without replacement]
- ISO 199:2014 Rolling bearings — Thrust bearings — Geometrical product specification (GPS) and tolerance values
ISO 200 – ISO 499[edit]
- ISO/R 200:1961 Rolling bearings — Tolerances — Definitions [Withdrawn: replaced with ISO 1132]
- ISO/R 201:1961 Rolling bearings — Radial internal clearance in unloaded radial groove type ball bearings with cylindrical bore [Withdrawn: replaced with ISO 5753]
- ISO/R 202:1961 Metallic materials — Steel tubes — Flattening Test [Withdrawn: replaced with ISO 8492]
- ISO/R 203:1961 Metallic materials — Interrupted uniaxial creep testing in tension — Method of test [Withdrawn without replacement]
- ISO 204:2018 Metallic materials — Uniaxial creep testing in tension — Method of test
- ISO/R 205:1961 Steel — Determination of proof stress and proving test at elevated temperature [Withdrawn: replaced with ISO 783, and later ISO 6892-2]
- ISO/R 206:1961 Steel — Creep stress rupture testing of at elevated temperatures [Withdrawn: replaced with ISO 204]
- ISO 207:1980 Magnesium and magnesium alloys — Unalloyed magnesium — Chemical composition [Withdrawn: replaced with ISO 8287]
- ISO/R 208:1961 Aluminium and aluminium alloys — Castings — Chemical composition (complement to ISO/R 164) [Withdrawn: replaced with ISO 3522]
- ISO 209:2007 Aluminium and aluminium alloys — Chemical composition
- ISO/TS 210:2014 Essential oils — General rules for packaging, conditioning and storage
- ISO/TS 211:2014 Essential oils — General rules for labelling and marking of containers
- ISO 212:2007 Essential oils — Sampling
- ISO 213:1982 Machine tools — Lathe tool posts — Overall internal height [Withdrawn without replacement]
- ISO 214:1976 Documentation — Abstracts for publications and documentation
- ISO 215:1986 Documentation — Presentation of contributions to periodicals and other serials
- ISO 216:2007 Writing paper and certain classes of printed matter — Trimmed sizes — A and B series, and indication of machine direction
- ISO 217:2013 Paper — Untrimmed sizes — Designation and tolerances for primary and supplementary ranges, and indication of machine direction
- ISO/R 218:1961 Scale of 35 mm microfilms for international exchange [Withdrawn without replacement]
- ISO/R 219:1961 Pesticides — Common names — Second series of terms [Withdrawn: replaced with ISO 1750]
- ISO/R 220:1961 Textile fibres — Some methods of sampling for testing [Withdrawn: replaced with ISO 1130]
- ISO 221:1976 Metallic materials — Steel tubes — Wall thicknesses [Withdrawn without replacement]
- ISO/R 222:1968 Aerospace — Characteristics of aircraft electrical systems [Withdrawn: replaced with ISO 1540]
- ISO 223:1975 Aircraft — Ground support electrical supplies — General requirements [Withdrawn: replaced with ISO 6858]
- ISO/TR 224:1998 Aircraft — Declaration of design and performance for aircraft equipment — Standard form [Withdrawn without replacement]
- ISO 225:2010 Fasteners — Bolts, screws, studs and nuts — Symbols and descriptions of dimensions
- ISO 226:2003 Acoustics — Normal equal-loudness-level contours
- ISO 227:1978 Textile machinery and accessories — Single box pickers for centre tip shuttles for automatic looms and related picking stick dimensions [Withdrawn without replacement]
- ISO 228 Pipe threads where pressure-tight joints are not made on the threads
- ISO 229:1973 Machine tools — Speeds and feeds
- ISO 230 Test code for machine tools
- ISO 230-1:2012 Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions
- ISO 230-2:2014 Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
- ISO 230-3:2020 Part 3: Determination of thermal effects
- ISO 230-4:2005 Part 4: Circular tests for numerically controlled machine tools
- ISO 230-5:2000 Part 5: Determination of the noise emission
- ISO 230-6:2002 Part 6: Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests)
- ISO 230-7:2015 Part 7: Geometric accuracy of axes of rotation
- ISO/TR 230-8:2010 Part 8: Vibrations
- ISO/TR 230-9:2005 Part 9: Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations
- ISO 230-10:2016 Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools
- ISO/TR 230-11:2018 Part 11: Measuring instruments suitable for machine tool geometry tests
- ISO/R 231:1961 Paper vocabulary — Third series of terms [Withdrawn: replaced with ISO 4046]
- ISO/R 232:1961 Straight-sides splines and gauges — Dimensions in inches [Withdrawn without replacement]
- ISO 233 Information and documentation — Transliteration of Arabic characters into Latin characters[Note 3]
- ISO 234 Files and rasps
- ISO 234-1:1983 Part 1: Dimensions
- ISO 234-2:1982 Part 2: Characteristics of cut
- ISO 235:2016 Parallel shank jobber and stub series drills and Morse taper shank drills
- ISO 236 Reamers[Note 3]
- ISO 236-1:1976 Hand reamers
- ISO 236-2:2013 Part 2: Long fluted machine reamers with Morse taper shanks
- ISO 237:1975 Rotating tools with parallel shanks — Diameters of shanks and sizes of driving squares
- ISO 238:2016 Reduction sleeves and extension sockets for tools with Morse taper shanks
- ISO 239:1999 Drill chuck tapers
- ISO 240:2016 Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandrels
- ISO 241:1994 Shanks for turning and planing tools — Shapes and dimensions of the section
- ISO 242:2014 Carbide tips for brazing on turning tools
- ISO 243:2014 Turning tools with carbide tips — External tools
- ISO 244:1979 Aircraft — Sealing wire
- ISO 245:1998 Aerospace — Lockwire — Diameters
- ISO 246:2007 Rolling bearings — Cylindrical roller bearings, separate thrust collars — Boundary dimensions
- ISO 247 Rubber — Determination of ash
- ISO 247-1:2018 Part 1: Combustion method
- ISO 247-2:2018 Part 2: Thermogravimetric analysis (TGA)
- ISO 248 Rubber, raw – Determination of volatile-matter content
- ISO 248-1:2011 Part 1: Hot-mill method and oven method
- ISO 248-2:2019 Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
- ISO 249:2016 Rubber, raw natural — Determination of dirt content
- ISO/R 250:1962 Rubber, raw natural — Sampling and preparation [Withdrawn: replaced with ISO 1795 and ISO 1796 (which was later replaced by ISO 1795)]
- ISO 251:2012 Conveyor belts with textile carcass — Widths and lengths
- ISO 252:2007 Conveyor belts — Adhesion between constitutive elements — Test methods
- ISO/R 253:1962 Belt drives — Grooved pulleys — sections Y and Z [Withdrawn: replaced with ISO 4183]
- ISO 254:2011 Belt drives — Pulleys — Quality, finish and balance
- ISO 255:1990 Belt drives — Pulleys for V-belts (system based on datum width) — Geometrical inspection of grooves
- ISO/R 256:1962 Belt drives — Section checking for V-belts [Withdrawn without replacement]
- ISO 257:2018 Pesticides and other agrochemicals — Principles for the selection of common names
- ISO/R 258:1961 Pesticides — Common names — Third series of terms [Withdrawn: replaced with ISO 1750]
- ISO 259 Information and documentation — Transliteration of Hebrew characters into Latin characters[Note 3]
- ISO/R 260:1962 Terms related to microcopies and their bases [Withdrawn without replacement]
- ISO 261:1998 ISO general purpose metric screw threads — General plan
- ISO 262:1998 ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
- ISO 263:1973 ISO inch screw threads — General plan and selection for screws, bolts and nuts — Diameter range 0,06 to 6 in'
- ISO 264:1976 Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure — Laying lengths — Metric series [Withdrawn: replaced with ISO 1452-3]
- ISO 265 Pipes and fittings of plastics materials — Fittings for domestic and industrial waste pipes — Basic dimensions: Metric series
- ISO 265-1:1988 Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
- ISO 266:1997 Acoustics — Preferred frequencies
- ISO/R 267:1962 Aircraft — Figures for instrument dials and number plates [Withdrawn without replacement]
- ISO 268:1980 Aircraft — Mechanical and electromechanical indicators — General requirements
- ISO 269:1985 Correspondence envelopes – Designation and sizes [Withdrawn without replacement]
- ISO 270:1975 Textile fibres — Determination of length by measuring individual fibres [Withdrawn: replaced with ISO 6989]
- ISO/R 271:1962 Textiles — Implementation of the Tex System for designating the size of fibres [Withdrawn: replaced with ISO 1144]
- ISO 272:1982 Fasteners — Hexagon products — Widths across flats
- ISO 273:1979 Fasteners — Clearance holes for bolts and screws
- ISO 274:1975 Copper tubes of circular section — Dimensions [Withdrawn without replacement]
- ISO/R 275:1962 Zinc Oxide for paints — Requirements and methods of test [Withdrawn without replacement]
- ISO 276:2019 Binders for paints and varnishes — Linseed stand oil — Requirements and methods of test
- ISO 277:2002 Binders for paints and varnishes — Raw tung oil — Requirements and methods of test
- ISO/R 278:1962 Essential oils — Standard layout for methods of analysis of essential oils [Withdrawn without replacement]
- ISO 279:1998 Essential oils — Determination of relative density at 20 degrees C – Reference method
- ISO 280:1998 Essential oils — Determination of refractive index
- ISO 281:2007 Rolling bearings — Dynamic load ratings and rating life
- ISO 282:1992 Conveyor belts — Sampling
- ISO 283:2015 Textile conveyor belts — Full thickness tensile strength, elongation at break and elongation at the reference load — Test method
- ISO 284:2012 Conveyor belts – Electrical conductivity – Specification and test method
- ISO/R 285:1962 Metallic materials — Steel tubes — Butt welding bends
- ISO 286 Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes
- ISO 286-1:2010 Part 1: Basis of tolerances, deviations and fits
- ISO 286-2:2010 Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
- ISO 287:2017 Paper and board — Determination of moisture content of a lot — Oven-drying method
- ISO/R 288
- ISO/R 288-1:1963 Part 1: Slotted and castle nuts with metric thread [Withdrawn without replacement]
- ISO/R 288-2:1969 Part 2: Slotted and castle nuts with metric thread 42 up to and including 100 mm thread diameter [Withdrawn without replacement]
- ISO 289 Rubber, unvulcanized — Determinations using a shearing-disc viscometer
- ISO 289-1:2015 Part 1: Determination of Mooney viscosity
- ISO 289-2:2020 Part 2: Determination of pre-vulcanization characteristics
- ISO 289-3:2015 Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR
- ISO 289-4:2003 Part 4: Determination of the Mooney stress-relaxation rate
- ISO/R 290:1961 Pesticides — Common names — Fourth series of terms [Withdrawn: replaced by ISO 1750]
- ISO 291:2008 Plastics — Standard atmospheres for conditioning and testing
- ISO/R 292:1967 Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics [Withdrawn: replaced by ISO 1133]
- ISO 293:2004 Plastics — Compression moulding of test specimens of thermoplastic materials
- ISO 294 Plastics — Injection moulding of test specimens of thermoplastic materials
- ISO 294-1:2017 Part 1: General principles, and moulding of multipurpose and bar test specimens
- ISO 294-2:2018 Part 2: Small tensile bars
- ISO 294-3:2020 Part 3: Small plates
- ISO 294-4:2018 Part 4: Determination of moulding shrinkage
- ISO 294-5:2017 Part 5: Preparation of standard specimens for investigating anisotropy
- ISO 295:2004 Plastics — Compression moulding of test specimens of thermosetting materials
- ISO 296:1991 Machine tools — Self-holding tapers for tool shanks
- ISO 297:1988 7/24 tapers for tool shanks for manual changing
- ISO 298:1973 Machine tools — Lathe centres — Sizes for interchangeability
- ISO 299:1987 Machine tool tables — T-slots and corresponding bolts
- ISO/R 300 Rolling bearings — ISO identification code
- ISO/R 300-1:1963 Rolling bearings — ISO identification code for group I: Radial Ball and Rolling Bearings, group II: Thrust Ball and Rolling Bearings, and group III: Tapered Rolling Bearings, Metric Series [Withdrawn without replacement]
- ISO/R 300-2:1965 Rolling bearings — ISO identification code for group IV: Tapered Rolling Bearings, Inch Series [Withdrawn without replacement]
- ISO 301:2006 Zinc alloy ingots intended for castings
- ISO 302:2015 Pulps — Determination of Kappa number
- ISO 303:2002 Road vehicles — Installation of lighting and light signalling devices for motor vehicles and their trailers [Withdrawn without replacement]
- ISO 304:1985 Surface active agents — Determination of surface tension by drawing up liquid films
- ISO 305:2019 Plastics — Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds — Discoloration method
- ISO 306:2013 Plastics — Thermoplastic materials – Determination of Vicat softening temperature (VST)
- ISO 307:2019 Plastics — Polyamides — Determination of viscosity number
- ISO 308:1994 Plastics — Phenolic moulding materials — Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)
- ISO/R 309 Manganese ores — Methods of sampling
- ISO/R 309-1:1963 Manganese ores — Methods of sampling — Part 1: Ore loaded in freight wagons [Withdrawn without replacement]
- ISO 310:1992 Manganese ores and concentrates — Determination of hygroscopic moisture content in analytical samples — Gravimetric method
- ISO/R 311:1963 Manganese ores and concentrates — Determination of silicon content [Withdrawn: replaced with ISO 5890]
- ISO 312:1986 Manganese ores — Determination of active oxygen content, expressed as manganese dioxide — Titrimetric method
- ISO/R 313:1963 Manganese ores and concentrates — Determination of total iron content [Withdrawn: replaced with ISO 7990]
- ISO 314:1981 Manganese ores — Determination of carbon dioxide content — Gravimetric method [Withdrawn without replacement]
- ISO 315:1984 Manganese ores and concentrates — Determination of nickel content — Dimethylglyoxime spectrometric method and flame atomic absorption spectrometric method
- ISO 316:1982 Manganese ores — Determination of cobalt content — Nitroso-R-salt photometric method [Withdrawn without replacement]
- ISO 317:1984 Manganese ores and concentrates — Determination of arsenic content — Spectrometric method
- ISO/R 318:1963 Manganese ores and concentrates — Determination of aluminium content [Withdrawn: replaced with ISO 4295]
- ISO/R 319:1963 Manganese ores and concentrates — Determination of manganese content [Withdrawn: replaced with ISO 4298]
- ISO 320:1981 Manganese ores — Determination of sulphur content — Barium sulphate gravimetric methods and sulphur dioxide titrimetric method after combustion
- ISO/R 321:1963 Manganese ores and concentrates — Determination of phosphorus content [Withdrawn: replaced with ISO 4293]
- ISO/R 322:1978 Manganese ores and concentrates — Determination of copper content [Withdrawn: replaced with ISO 4294]
- ISO/R 323:1963 Manganese ores and concentrates — Determination of lead content [Withdrawn without replacement]
- ISO 324:1978 Textile machinery and accessories — Cones for cross winding for dyeing purposes — Half angle of the cone 4 degrees 20' [Withdrawn: replaced with ISO 8489-4]
- ISO/R 325:1963 Textile machinery and accessories — Wood cones for cross winding — Half angle of the cone 4 degrees 20' [Withdrawn without replacement]
- ISO/R 326:1963 Textile machinery and accessories — Wood cones for cross winding — Nominal half angle of the cone 5 degrees 57' [Withdrawn without replacement]
- ISO/R 327:1963 Textile machinery and accessories — Wood cones for cross winding — Half angle of the cone 3 degrees 30' [Withdrawn without replacement]
- ISO 328:1974 Picture postcards and lettercards — Size [Withdrawn without replacement]
- ISO/R 329:1963 Large pallets for through transit of goods [Withdrawn without replacement]
- ISO/R 330:1963 Thermoplastics pipes for the conveyance of fluids — Nominal outside diameters and nominal pressures — Inch-based series [Withdrawn: replaced with ISO 161-2]
- ISO 331:1983 Coal — Determination of moisture in the analysis sample — Direct gravimetric method [Withdrawn without replacement]
- ISO 332:1981 Coal — Determination of nitrogen — Macro Kjeldahl method [Withdrawn without replacement]
- ISO 333:1996 Coal — Determination of nitrogen — Semi-micro Kjeldahl method [Withdrawn without replacement]
- ISO 334:2020 Coal and coke — Determination of total sulfur — Eschka method
- ISO 335:1974 Hard coal — Determination of caking power — Roga test [Withdrawn without replacement]
- ISO 336:1976 Plain end steel tubes, welded and seamless — General table of dimensions and masses per unit length [Withdrawn: replaced with ISO 4200]
- ISO 337:1981 Road vehicles — 50 semi-trailer fifth wheel coupling pin — Basic and mounting/interchangeability dimensions
- ISO/R 338:1963 Lifeboats for less than one hundred people [Withdrawn without replacement]
- ISO/R 339:1963 Definition of terms appearing in ISO recommendations for oils and pigments [Withdrawn without replacement]
- ISO 340:2013 Conveyor belts — Laboratory scale flammability characteristics — Requirements and test method
- ISO 341:1976 Textile machinery and accessories — Cotton spinning machinery — Working width [Withdrawn without replacement]
- ISO 342:1983 Textile machinery and accessories — Worsted and woollen cards — Width of cylinder and width on the wire [Withdrawn without replacement]
- ISO/R 343:1963 Textile machinery and accessories — Warp tubes for ring spinning and ring doubling spindles — inch dimensions, tolerances, and gauges [Withdrawn without replacement]
- ISO 344:1981 Textile machinery and accessories — Spinning machines — Flyer bobbins [Withdrawn without replacement]
- ISO/R 345:1963 Shipbuilding details — Tests on galvanized steel wire ropes [Withdrawn without replacement]
- ISO/R 346:1963 Shipbuilding details — Galvanized steel wire ropes [Withdrawn without replacement]
- ISO/R 347:1963 Shipbuilding details — Anchor chains- End shackles [Withdrawn without replacement]
- ISO 348:1981 Hard coal — Determination of moisture in the analysis sample — Direct volumetric method [Withdrawn without replacement]
- ISO 349:2020 Hard coal — Audibert-Arnu dilatometer test
- ISO/R 350:1963 Hard coal — Determination of chlorine by the bomb-combustion method [Withdrawn without replacement]
- ISO 351:1996 Solid mineral fuels — Determination of total sulfur — High temperature combustion method [Withdrawn without replacement]
- ISO 352:1981 Solid mineral fuels — Determination of chlorine — High temperature combustion method [Withdrawn without replacement]
- ISO 353:1975 Processed writing paper and certain classes of printed matter — Method of expression of dimensions [Withdrawn without replacement]
- ISO 354:2003 Acoustics — Measurement of sound absorption in a reverberation room
- ISO 355:2019 Rolling bearings — Tapered roller bearings — Boundary dimensions and series designations
- ISO 356:1996 Essential oils — Preparation of test samples
- ISO/R 357:1963 Acoustics — Expression of the physical magnitudes of sound or noise in air [Withdrawn: replaced with ISO 131, now withdrawn without replacement]
- ISO 358:1975 Cinematography — Maximum aspect ratio of projector aperture for projection of 35 mm non-anamorphic motion-picture film — Specifications [Withdrawn without replacement]
- ISO 359:1983 Cinematography — Projectable image area on 16 mm motion-picture prints — Dimensions and location
- ISO 360:1975 Cinematography — Recording and reproducing head gaps for four-track magnetic sound records on 35 mm motion-picture film containing no picture — Positions and width dimensions [Withdrawn: replaced with ISO 162]
- ISO 361:1975 Basic ionizing radiation symbol
- ISO 362 Measurement of noise emitted by accelerating road vehicles — Engineering method
- ISO 362-1:2015 Part 1: M and N categories
- ISO 362-2:2009 Part 2: L category
- ISO 362-3:2016 Part 3: Indoor testing M and N categories
- ISO 363 Textile machinery and accessories — Flat steel healds with closed end loops
- ISO 363-1:2006 Part 1: Dimensions of healds manufactured of rolled steel wire
- ISO 363-2:2006 Part 2: Dimensions of healds manufactured of hardened strip steel
- ISO 364:1983 Textile machinery and accessories — Twin wire healds for weaving machines with heald frames
- ISO 365:1982 Textile machinery and accessories — Twin wire healds with inset mail for Jacquard weaving
- ISO 366 Textile machinery and accessories — Reeds
- ISO 366-2:2009 Part 2: Dimensions and designation of metal reeds with plate baulk
- ISO 366-3:2009 Part 3: Dimensions and designation of metal reeds with double-spring baulk
- ISO 366-4:2005 Part 4: Dimensions and designation of plastic-bound metal reeds
- ISO 366-5:2006 Part 5: Dimensions and designation of profile capsules
- ISO 367:1976 Textile machinery and accessories — Metal reeds with plate baulk — Dimensions [Withdrawn: replaced with ISO 366-2]
- ISO 368:2017 Spinning preparatory, spinning and doubling (twisting) machinery — Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64
- ISO 369:2009 Machine tools — Symbols for indications appearing on machine tools
- ISO 370:1975 Toleranced dimensions — Conversion from inches into millimetres and vice versa [Withdrawn without replacement]
- ISO/R 371:1964 Terms relating to microcopy apparatus [Withdrawn without replacement]
- ISO/R 372:1964 Paper vocabulary — Fourth series of terms [Withdrawn: replaced with ISO 4046]
- ISO/R 373:1964 General principles for fatigue testing of metals [Withdrawn without replacement]
- ISO 374 Protective gloves against dangerous chemicals and micro-organisms
- ISO 374-1:2016 Part 1: Terminology and performance requirements for chemical risks
- ISO 374-2:2019 Part 2: Determination of resistance to penetration
- ISO 374-4:2019 Part 4: Determination of resistance to degradation by chemicals
- ISO 374-5:2016 Part 5: Terminology and performance requirements for micro-organisms risks
- ISO 375:1974 Steel — Tensile testing of tubes [Withdrawn: replaced with ISO 6892-1]
- ISO 376:2011 Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
- ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
- ISO 378:1980 Gymnastic equipment — Parallel bars [Withdrawn without replacement]
- ISO 379:1980 Gymnastic equipment — Horizontal bar [Withdrawn without replacement]
- ISO/R 380:1964 Gymnastic equipment — Rings [Withdrawn without replacement]
- ISO/R 381:1964 Gymnastic equipment — Vaulting horse and pommeled horse [Withdrawn without replacement]
- ISO/R 382:1964 Gymnastic equipment — Balancing Beam [Withdrawn without replacement]
- ISO 383:1976 Laboratory glassware — Interchangeable conical ground joints
- ISO 384:2015 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments
- ISO 385:2005 Laboratory glassware — Burettes
- ISO 386:1977 Liquid-in-glass laboratory thermometers — Principles of design, construction and use [Withdrawn without replacement]
- ISO 387:1977 Hydrometers — Principles of construction and adjustment
- ISO/R 388:1964 ISO metric series for basic thicknesses of sheet and diameters of wire [Withdrawn without replacement]
- ISO 389 Acoustics — Reference zero for the calibration of audiometric equipment
- ISO 389-1:2017 Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones
- ISO 389-2:1994 Part 2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones
- ISO 389-3:2016 Part 3: Reference equivalent threshold vibratory force levels for pure tones and bone vibrators
- ISO 389-4:1994 Part 4: Reference levels for narrow-band masking noise
- ISO 389-5:2006 Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz
- ISO 389-6:2007 Part 6: Reference threshold of hearing for test signals of short duration
- ISO 389-7:2019 Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions
- ISO 389-8:2004 Part 8: Reference equivalent threshold sound pressure levels for pure tones and circumaural earphones
- ISO 389-9:2009 Part 9: Preferred test conditions for the determination of reference hearing threshold levels
- ISO 390:1993 Products in fibre-reinforced cement — Sampling and inspection
- ISO 391:1982 Building and sanitary pipes in asbestos-cement [Withdrawn without replacement]
- ISO 392:1986 Asbestos-cement pipe fittings for building and sanitary purposes
- ISO 393 Asbestos-cement products — Corrugated sheets and fittings for roofing and cladding
- ISO 393-1:1983 Asbestos-cement products — Part 1: Corrugated sheets and fittings for roofing and cladding [Withdrawn without replacement]
- ISO 393-2:1986 Asbestos-cement products — Part 2: Asbestos-cement-cellulose corrugated sheets and fittings for roofing and cladding [Withdrawn without replacement]
- ISO 393-3:1984 Asbestos-cement products — Part 3: Asymmetrical section corrugated sheets and fittings for roofing and cladding [Withdrawn without replacement]
- ISO 393-4:1986 Asbestos-cement products — Part 4: Trapezoidal section sheets for roofing and cladding [Withdrawn without replacement]
- ISO 393-5:1987 Asbestos-cement products — Part 5: Short corrugated and asymmetrical section sheets and fittings for roofing [Withdrawn without replacement]
- ISO/R 394:1964 Asymmetrical section corrugated sheets in asbestos-cement for roofing and cladding [Withdrawn without replacement]
- ISO 395:1983 Asbestos-cement slates [Withdrawn without replacement]
- ISO 396 Products in fibre reinforced cement
- ISO 396-1:1980 Part 1: Asbestos-cement flat sheets [Withdrawn without replacement]
- ISO 396-2:1980 Part 2: Silica-asbestos-cement flat sheets [Withdrawn without replacement]
- ISO 396-3:1980 Part 3: Cellulose-asbestos-cement flat sheets [Withdrawn without replacement]
- ISO/R 397:1964 Copper and copper alloys — Wire — Wrapping test [Withdrawn: replaced with ISO 7802]
- ISO/R 398:1964 Copper and copper alloys — Bend test [Withdrawn: replaced with ISO 7438]
- ISO/R 399:1964 Copper and copper alloys — Vickers hardness test [Withdrawn: replaced with ISO 6507-1 and ISO 6507-4]
- ISO/R 400:1964 Copper and copper alloys — Tensile test [Withdrawn: replaced with ISO 6892-1]
- ISO/R 401:1964 Copper and copper alloys — Tubes of circular section — Tensile test [Withdrawn: replaced with ISO 6892-1]
- ISO/R 402:1964 Copper and copper alloys — Wire — Tensile test [Withdrawn: replaced with ISO 6892-1]
- ISO/R 403:1964 Copper and copper alloys — Brinell hardness test [Withdrawn: replaced with ISO 6506-1 and ISO 6506-4]
- ISO 404:2013 Steel and steel products — General technical delivery requirements
- ISO/R 405:1964 Aircraft — Tow bar attachment fittings — Interface requirements [Withdrawn: replaced with ISO 8267, and later ISO 8267-1 and ISO 8267-2]
- ISO 406:1987 Technical drawings — Tolerancing of linear and angular dimensions [Withdrawn: replaced with ISO 129-1 and ISO 14405-2]
- ISO 407:2004 Small medical gas cylinders — Pin-index yoke-type valve connections
- ISO/R 408:1964 Safety Colours [Withdrawn: replaced with ISO 3864-1]
- ISO 409 Metallic materials — Hardness test — Tables of Vickers hardness values for use in tests made on flat surfaces
- ISO 409-1:1982 Metallic materials — Hardness test — Tables of Vickers hardness values for use in tests made on flat surfaces — Part 1: HV 5 to HV 100 [Withdrawn: replaced with ISO 6507-1 and ISO 6507-4]
- ISO 409-2:1983 Metallic materials — Hardness test — Tables of Vickers hardness values for use in tests made on flat surfaces — Part 2: HV 0,2 to less than HV 5 [Withdrawn: replaced with ISO 6507-1 and ISO 6507-4]
- ISO 410:1982 Metallic materials — Hardness test — Tables of Brinell hardness values for use in tests made on flat surfaces [Withdrawn: replaced with ISO 6506-1 and ISO 6506-4]
- ISO/R 411:1964 Pesticides — Common names — Fifth series of terms [Withdrawn: replaced with ISO 1750]
- ISO 412:1976 Gum spirit of turpentine and wood turpentines for paints and varnishes [Withdrawn without replacement]
- ISO 413:1974 Aircraft — Heads of lubricating nipples
- ISO/R 414:1965 Aircraft — Tyre Valves [Withdrawn without replacement]
- ISO 415:1975 Envelopes, postcards and similar articles — Cancellation area [Withdrawn without replacement]
- ISO 416:1974 Picture postcards — Area reserved for the address [Withdrawn without replacement]
- ISO 417:1993 Photography — Determination of residual thiosulfate and other related chemicals in processed photographic materials — Methods using iodine-amylose, methylene blue and silver sulfide [Withdrawn: replaced with ISO 18917]
- ISO 418:2001 Photography — Processing chemicals — Specifications for anhydrous sodium sulfite
- ISO 419:1972 Photography — Processing chemicals — Specifications for sodium thiosulfate pentahydrate [Withdrawn: replaced with ISO 10636]
- ISO 420:1994 Photography — Processing chemicals — Specifications for potassium bromide
- ISO/R 421:1965 Photography — Processing chemicals — Method for indicating the stability of the images of processed black-and white films, plates, and papers [Withdrawn without replacement]
- ISO 422:1994 Photography — Processing chemicals — Specifications for p-methylaminophenol sulfate
- ISO 423:1994 Photography — Processing chemicals — Specifications for hydroquinone
- ISO 424:1994 Photography — Processing chemicals — Specifications for anhydrous sodium carbonate and sodium carbonate monohydrate
- ISO 425:1973 Photography — Sensitized materials — Quantity packaging [Withdrawn without replacement]
- ISO 426 Wrought copper-zinc alloys — Chemical composition and forms of wrought products
- ISO 426-1:1983 Wrought copper-zinc alloys — Chemical composition and forms of wrought products — Part 1: Non-leaded and special copper-zinc alloys [Withdrawn without replacement]
- ISO 426-2:1983 Wrought copper-zinc alloys — Chemical composition and forms of wrought products — Part 2: Leaded copper-zinc alloys [Withdrawn without replacement]
- ISO 427:1983 Wrought copper-tin alloys — Chemical composition and forms of wrought products [Withdrawn without replacement]
- ISO 428:1983 Wrought copper-aluminium alloys — Chemical composition and forms of wrought products [Withdrawn without replacement]
- ISO 429:1983 Wrought copper-nickel alloys — Chemical composition and forms of wrought products [Withdrawn without replacement]
- ISO 430:1983 Wrought copper-nickel-zinc alloys — Chemical composition and forms of wrought products [Withdrawn without replacement]
- ISO 431:1981 Copper refinery shapes [Withdrawn without replacement]
- ISO 432:1989 Ply type conveyor belts — Characteristics of construction [Withdrawn without replacement]
- ISO 433:2017 Conveyor belts — Marking
- ISO/R 434:1965 Y-section V-belts — Lengths [Withdrawn: replaced by ISO 4184]
- ISO 435:1975 Micrographics — ISO character — Description and use [Withdrawn: replaced by ISO 446]
- ISO/R 436:1965 Informative labelling [Withdrawn without replacement]
- ISO 437:1982 Steel and cast iron — Determination of total carbon content — Combustion gravimetric method [Withdrawn without replacement]
- ISO 438:1980 Paper — Determination of bulking thickness and apparent density [Withdrawn: replaced by ISO 534]
- ISO 439:2020 Steel and cast iron — Determination of silicon content — Gravimetric method
- ISO/R 440:1965 Aircraft — shape, size, and direction of operation of lever controls [Withdrawn without replacement]
- ISO 441:1997 Textile machinery and accessories — Drop wires for warp stop motions for weaving machines without automatic drawing-in
- ISO/R 442:1965 Verification of pendulum impact testing machines for testing steels [Withdrawn without replacement]
- ISO/R 443:1965 Aircraft — Marking of gas cylinders [Withdrawn without replacement]
- ISO 444:1981 Phlogopite mica blocks, thins and splittings — Grading by size [Withdrawn without replacement]
- ISO 445:2013 Pallets for materials handling — Vocabulary
- ISO 446:2004 Micrographics — ISO character and ISO test chart No. 1 — Description and use
- ISO 447:1984 Machine tools — Direction of operation of controls
- ISO 448:1981 Gas cylinders for industrial use — Marking for identification of content [Withdrawn without replacement]
- ISO 449:1997 Ships and marine technology — Magnetic compasses, binnacles and azimuth reading devices — Class A [Withdrawn: replaced with ISO 25862]
- ISO 450:1975 Aircraft — Connection for water of drinkable quality [Withdrawn: replaced with ISO 17775]
- ISO 451:1976 Aircraft — Pressure re-oiling connection
- ISO/R 452:1965 Essential characteristics of 35 mm microfilm ready apparatus [Withdrawn without replacement]
- ISO/R 453:1965 Surface active agents — Vocabulary — First list [Withdrawn: replaced with ISO 862]
- ISO 454:1975 Acoustics — Relation between sound pressure levels of narrow bands of noise in a diffuse field and in a frontally-incident free field for equal loudness [Withdrawn without replacement]
- ISO/R 455:1965 Analysis of soaps — Determination of total crude fatty acids [Withdrawn: replaced with ISO 685]
- ISO 456:1973 Surface active agents — Analysis of soaps — Determination of free caustic alkali
- ISO 457:1983 Soaps — Determination of chloride content — Titrimetric method
- ISO 458 Plastics — Determination of stiffness in torsion of flexible materials
- ISO 458-1:1985 Part 1: General method
- ISO 458-2:1985 Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride
- ISO/R 459:1962 Narrow V-belts — Grooved pulleys — Groove sections SPZ, SPA, SPB [Withdrawn: replaced with ISO 4183]
- ISO/R 460:1962 Narrow V-belts — Lengths — Groove sections SPZ, SPA, SPB [Withdrawn: replaced with ISO 4184]
- ISO 461 Aircraft — Connectors for ground electrical supplies
- ISO 461-1:2003 Part 1: Design, performance and test requirements
- ISO 461-2:1985 Part 2: Dimensions
- ISO/R 462:1965 Plastics — Determination of the change of mechanical properties after contact with chemical substances [Withdrawn: replaced with ISO 175]
- ISO 463:2006 Geometrical Product Specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of mechanical dial gauges
- ISO 464:2015 Rolling bearings — Radial bearings with locating snap ring — Dimensions, geometrical product specifications (GPS) and tolerance values
- ISO/R 465:1965 Rolling bearings — Double row self-aligning roller bearings — Radial internal clearance [Withdrawn: replaced with ISO 5753]
- ISO 466:1976 Cinematography — Image produced by 16 mm motion-picture camera aperture — Position and dimensions
- ISO/R 467:1966 Preferred modules and diametral pitches of cylindrical gears for general engineering [Withdrawn without replacement]
- ISO 468:1982 Surface roughness — Parameters, their values and general rules for specifying requirements [Withdrawn without replacement]
- ISO/R 469:1966 Aircraft — Conductors for general purpose aircraft electrical cables — Dimensions and characteristics [Withdrawn: replaced with ISO 2635]
- ISO/R 470:1966 Aircraft — Conductors for heat-resisting aircraft electrical cables — Dimensions and characteristics [Withdrawn: replaced with ISO 2635]
- ISO 471:1995 Rubber — Temperatures, humidities and times for conditioning and testing [Withdrawn: replaced with ISO 23529]
- ISO 472:2013 Plastics — Vocabulary
- ISO 473:2019 Lithopone pigments — General requirements and methods of testing
- ISO/R 474:1966 Aircraft — Conductors for general purpose aircraft electrical cables — Performance requirements [Withdrawn without replacement]
- ISO/R 475:1966 Rectangular refractory bricks — Dimensions [Withdrawn: replaced with ISO 5019-1]
- ISO 476:1982 Textile machinery and accessories — Pirn winding machines — Vocabulary
- ISO 477:1982 Textile machinery and accessories — Cone and cheese winding machines — Vocabulary
- ISO 478:1974 Paper — Untrimmed stock sizes for the ISO-A Series — ISO primary range [Withdrawn: replaced with ISO 217]
- ISO 479:1975 Paper — Untrimmed sizes — Designation and tolerances [Withdrawn: replaced with ISO 217]
- ISO/R 480:1966 Perforated metal cheese centres for bast fibre yearns [Withdrawn without replacement]
- ISO 481:1977 Textile machinery and accessories — Warper's beams — Terminology and main dimensions [Withdrawn: replaced with ISO 8116-2]
- ISO 482:1977 Aircraft — Propulsion units and components — Methods of numbering and describing direction of rotation [Withdrawn without replacement]
- ISO 483:2005 Plastics — Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value
- ISO 484 Shipbuilding — Ship screw propellers — Manufacturing tolerances
- ISO 484-1:2015 Part 1: Propellers of diameter greater than 2,50 m
- ISO 484-2:2015 Part 2: Propellers of diameter between 0,80 and 2,50 m inclusive
- ISO 485:1973 Aircraft water-methanol pressure connections
- ISO 486:1988 Cinematography — 16 mm motion-picture film perforated 8 mm Type R — Cutting and perforating dimensions
- ISO 487:1998 Steel roller chains, types S and C, attachments and sprockets
- ISO 488:2008 Milk — Determination of fat content — Gerber butyrometers [Withdrawn: replaced with ISO 19662]
- ISO 489:1999 Plastics — Determination of refractive index
- ISO 490:1993 Cinematography — Magnetic stripes and magnetic recording head gaps for sound record on 16 mm motion-picture film perforated along one edge (Type 1) — Positions and width dimensions
- ISO 491:2002 Cinematography — 35 mm motion-picture film and magnetic film — Cutting and perforating dimensions
- ISO 492:2014 Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values
- ISO 493:1975 Aircraft — Dimensions for single-hole mounting (Class 1 and Class 2) lever-operated manual switches
- ISO 494:2017 Cylindrical shank twist drills — Long series
- ISO 495:1966 Acoustics — Determination of sound power levels of noise sources [Withdrawn: replaced with ISO 3740, ISO 3741, ISO 3742, ISO 3743, ISO 3744, ISO 3745, and ISO 3746]
- ISO 496:1973 Driving and driven machines — Shaft heights [Withdrawn without replacement]
- ISO 497:1973 Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers
- ISO 498:1992 Natural rubber latex concentrate — Preparation of dry films
- ISO/R 499:1966 Paper — Internal diameters of cores of reels [Withdrawn without replacement]
ISO 500 – ISO 699[edit]
- ISO 500 Agricultural tractors — Rear-mounted power take-off types 1, 2, 3 and 4[Note 3]
- ISO 501:2012 Hard coal — Determination of the crucible swelling number
- ISO 502:2015 Coal — Determination of caking power — Gray-King coke test
- ISO/R 503:1966 Wrought magnesium-aluminium-zinc alloys — Chemical composition [Withdrawn: replaced with ISO 3116]
- ISO 504:1975 Turning tools with carbide tips — Designation and marking
- ISO 505:2017 Conveyor belts — Method for the determination of the tear propagation resistance of textile conveyor belts
- ISO 506:2020 Rubber latex, natural, concentrate — Determination of volatile fatty acid number
- ISO/R 507:1970 Acoustics — Procedure for describing aircraft noise heard on the ground using frequency weighting [Withdrawn: replaced with ISO 3891]
- ISO/R 508:1966 Ships and marine technology — Identification colours for the content of piping systems [Withdrawn: replaced with ISO 14726-1, now ISO 14726]
- ISO 509:1996 Pallet trucks — Principal dimensions [Withdrawn without replacement]
- ISO 510:1977 Red lead for paints
- ISO 511:1977 White lead pigments for paints [Withdrawn without replacement]
- ISO 512:1979 Road vehicles — Sound signalling devices — Technical specifications [Withdrawn without replacement]
- ISO 513:2012 Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application
- ISO 514:2014 Turning tools with carbide tips — Internal tools
- ISO 515:1973 Photography — Stereo systems using 35 mm objectives on 35 mm film, five-perforation format — Specifications [Withdrawn without replacement]
- ISO 516:2019 Camera shutters — Timing — General definition and mechanical shutter measurements
- ISO 517:2008 Photography — Apertures and related properties pertaining to photographic lenses — Designations and measurements
- ISO 518:2006 Photography — Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units — Specification
- ISO 519:1992 Photography — Hand-held cameras — Flash-connector dimensions
- ISO 520:2010 Cereals and pulses — Determination of the mass of 1 000 grains
- ISO 521:2011 Machine chucking reamers with cylindrical shanks and Morse taper shanks
- ISO 522:1975 Special tolerances for reamers
- ISO 523:1974 Milling cutters — Recommended range of outside diameters [Withdrawn without replacement]
- ISO/R 524:1966 Hard metal wire drawing dies — Interchangeability dimensions of pellets and cases [Withdrawn without replacement]
- ISO 525:2020 Bonded abrasive products — Shape types, designation and marking
- ISO/R 526:1966 Significance to purchasers of marks indicating conformitity with standards [Withdrawn without replacement]
- ISO 527 Plastics — Determination of tensile properties
- ISO 527-1:2019 Part 1: General principles
- ISO 527-2:2012 Part 2: Test conditions for moulding and extrusion plastics
- ISO 527-3:2018 Part 3: Test conditions for films and sheets
- ISO 527-4:2021 Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
- ISO 527-5:2009 Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
- ISO 528:1983 Refractory products — Determination of pyrometric cone equivalent (refractoriness)
- ISO 529:2017 Short machine taps and hand taps
- ISO 530:1975 Aircraft — General purpose push-pull single-pole circuit-breakers — Dimensions
- ISO/R 531:1966 Cast iron sanitary pipes and fittings for waste water and ventilation [Withdrawn without replacement]
- ISO 532 Acoustics — Methods for calculating loudness
- ISO 532-1:2017 Part 1: Zwicker method
- ISO 532-2:2017 Part 2: Moore-Glasberg method
- ISO/R 533:1966 Rolling bearings — Double row cylindrical roller bearings type with tapered bore 1:12 [Withdrawn without replacement]
- ISO 534:2011 Paper and board — Determination of thickness, density and specific volume
- ISO 535:2014 Paper and board — Determination of water absorptiveness — Cobb method
- ISO 536:2019 Paper and board — Determination of grammage
- ISO 537:1989 Plastics — Testing with the torsion pendulum [Withdrawn: replaced with ISO 6721-1, ISO 6721-2, ISO 6721-4, and ISO 6721-10]
- ISO/R 538:1967 Conventional signs to be used in the schemes for the installations of pipeline systems in ships [Withdrawn without replacement]
- ISO/R 539:1967 Acoustics — Dimensions and conductor resistance of heat-resisting (260°C) electrical cables with copper conductors [Withdrawn without replacement]
- ISO 540:2008 Hard coal and coke — Determination of ash fusibility
- ISO/R 541:1967 Measurement of fluid flow by means of orifice plates and nozzles [Withdrawn: replaced with ISO 5167, later ISO 5167-1]
- ISO 542:1990 Oilseeds — Sampling [Withdrawn: replaced with ISO 21294]
- ISO 543:1990 Photography — Photographic films — Specifications for safety film [Withdrawn: replaced with ISO 18906]
- ISO 544:2017 Welding consumables — Technical delivery conditions for filler materials and fluxes — Type of product, dimensions, tolerances and markings
- ISO 545:1975 Filler rods, other than drawn or extruded, for welding — Lengths and tolerance [Withdrawn: replaced with ISO 544]
- ISO 546:1975 Drawn or extruded filler rods for welding, supplied in straight lengths — Lengths and tolerance [Withdrawn: replaced with ISO 544]
- ISO 547:1975 Electrodes for the welding of mild steel and low alloy high tensile steel — Lengths and tolerance [Withdrawn: replaced with ISO 544]
- ISO 548:1981 Manganese ores — Determination of barium oxide content — Barium sulphate gravimetric method
- ISO 549:1981 Manganese ores — Determination of combined water content — Gravimetric method
- ISO 550:1981 Manganese ores — Determination of titanium content [Withdrawn: replaced with ISO 7723]
- ISO 551:1975 Manganese ores — Determination of zinc content — Zinc mercurithyocyanate gravimetric method [Withdrawn without replacement]
- ISO 552:1975 Manganese ores and concentrates — Determination of calcium and magnesium contents [Withdrawn: replaced with ISO 6233]
- ISO 553:1981 Manganese ores — Determination of vanadium content — Titrimetric method and phosphotungstovanadate photometric method [Withdrawn without replacement]
- ISO 554:1976 Standard atmospheres for conditioning and/or testing — Specifications
- ISO 555 Liquid flow measurement in open channels — Dilution methods for measurement of steady flow
- ISO 555-1:1973 Liquid flow measurement in open channels — Dilution methods for measurement of steady flow — Part 1: Constant-rate injection method [Withdrawn without replacement]
- ISO 555-2:1987 Liquid flow measurement in open channels — Dilution methods for the measurement of steady flow — Part 2: Integration method [Withdrawn without replacement]
- ISO 556:2020 Coke (greater than 20 mm in size) — Determination of mechanical strength
- ISO/R 557:1967 Safety Signs [Withdrawn: replaced with ISO 3864-1]
- ISO 558:1980 Conditioning and testing — Standard atmospheres — Definitions
- ISO 559:1991 Steel tubes for water and sewage [Withdrawn without replacement]
- ISO 560:1975 Cold drawn precision steel tubes — Metric series — Dimensions and masses per metre [Withdrawn: replaced with ISO 4200]
- ISO 561:1989 Coal preparation plant — Graphical symbols
- ISO 562:2010 Hard coal and coke — Determination of volatile matter
- ISO 563:1981 Equipment for harvesting — Knife sections for agricultural cutter bars [Withdrawn without replacement]
- ISO/R 564:1967 Aerospace — Preformed flexible steel wire rope for aircraft controls — Dimensions and loads [Withdrawn: replaced with ISO 2020, later ISO 2020-1]
- ISO 565:1990 Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings
- ISO/R 566:1967 Pesticides — Common names — Sixth series of terms [Withdrawn: replaced with ISO 1750]
- ISO 567:1995 Coke — Determination of bulk density in a small container
- ISO 568:1976 Textile machinery and accessories — Heald frames for single or double row of healds — Designation of dimensions [Withdrawn: replaced with ISO 10787-1 and ISO 10787-2]
- ISO 569:1982 Textile machinery and accessories — Heald frames — Co-ordinated dimensions in relation to the pitch of the harness [Withdrawn: replaced with ISO 10787-1 and ISO 10787-2]
- ISO 570:1982 Textile machinery and accessories — Heald carrying rods for healds with closed O-shaped end loops
- ISO 571:1976 Textile machinery and accessories — Metal reeds with double-spring baulk — Dimensions [Withdrawn: Replaced with ISO 366-3]
- ISO 572:1976 Textile machinery and accessories — Shuttles for pirn changing automatic looms — Dimensions [Withdrawn without replacement]
- ISO 573:1976 Textile machinery and accessories — Dobby lags and pegs in wood, metal or other suitable material — Dimensions [Withdrawn without replacement]
- ISO 574:1979 Textile machinery and accessories — Perforated cylindrical tubes for cheese dyeing [Withdrawn: Replaced with ISO 3914-7]
- ISO 575:1978 Textile machinery and accessories — Transfer cones — Half angle of the cone 4 degrees 20' [Withdrawn without replacement]
- ISO 576:1976 Textile machinery and accessories — Paper patterns for dobbies — Dimensions [Withdrawn without replacement]
- ISO/R 577 Rolling bearings — Tapered rolling bearings — Metric series — Tolerances
- ISO/R 577-1:1967 Rolling bearings — Tapered rolling bearings — Metric series — Tolerances — Part 1: Normal tolerances [Withdrawn: Replaced with ISO 492]
- ISO/R 577-2:1968 Rolling bearings — Tapered rolling bearings — Metric series — Tolerances — Part 2: Tolerances classes 6 and 5 [Withdrawn: Replaced with ISO 492]
- ISO 577-3:1973 Rolling bearings — Tapered rolling bearings — Metric series — Tolerances — Part 3: Tolerances classes 4 [Withdrawn: Replaced with ISO 492]
- ISO 578:1987 Tapered roller bearings — Inch series — Tolerances [Withdrawn without replacement]
- ISO 579:2013 Coke — Determination of total moisture
- ISO 580:2005 Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating
- ISO/TR 581:2005 Weldability — Metallic materials — General principles
- ISO 582:1995 Rolling bearings — Chamfer dimensions — Maximum values
- ISO 583:2007 Conveyor belts with a textile carcass — Total belt thickness and thickness of constitutive elements — Test methods
- ISO 584:1982 Plastics — Unsaturated polyester resins — Determination of reactivity at 80 degrees C (conventional method)
- ISO 585:1990 Plastics — Unplasticized cellulose acetate — Determination of moisture content
- ISO/R 586:1967 Coke — Determination of ash [Withdrawn: replaced with ISO 1171]
- ISO 587:2020 Coal and coke — Determination of chlorine using Eschka mixture
- ISO/R 588 was incorporated into ISO/R 862[3]
- ISO 589:2008 Hard coal — Determination of total moisture
- ISO 590:1981 Oil of brazilian sassafras [Withdrawn without replacement]
- ISO 591 Titanium dioxide pigments for paints
- ISO 591-1:2000 Part 1: Specifications and methods of test
- ISO 592:1998 Essential oils — Determination of optical rotation
- ISO 593:1974 Paper — Untrimmed stock sizes for the ISO-A Series — ISO supplementary range [Withdrawn: replaced with ISO 217]
- ISO 594 Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment
- ISO 594-1:1986 Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment — Part 1: General requirements [Withdrawn: replaced with ISO 80369-7]
- ISO 594-2:1998 Conical fittings with 6 % (Luer) taper for syringes, needles and certain other medical equipment — Part 2: Lock fittings [Withdrawn: replaced with ISO 80369-7]
- ISO 595 Reusable all-glass or metal-and-glass syringes for medical use [Withdrawn without replacement]
- ISO 595-1:1986 Reusable all-glass or metal-and-glass syringes for medical use — Part 1: Dimensions [Withdrawn without replacement]
- ISO 595-2:1987 Reusable all-glass or metal-and-glass syringes for medical use — Part 2: Design, performance requirements and tests [Withdrawn without replacement]
- ISO/R 596:1967 Hypodermic needles [Withdrawn without replacement]
- ISO/R 597:1967 Definitions and terminology of cements [Withdrawn without replacement]
- ISO/R 598:1967 Fundamental welding positions — Definitions and values of angles of slope and rotation for fillet welds for these positions [Withdrawn: replaced by ISO 6947]
- ISO 599:1985 Plastics — Polyamide homopolymers — Determination of matter extractable by boiling methanol [Withdrawn: replaced by ISO 6427]
- ISO/R 600:1967 Plastics — Polyamide homopolymers — Determination of the viscosity ratio in concentrated solution [Withdrawn without replacement]
- ISO 601:1981 Solid mineral fuels — Determination of arsenic content using the standard silver diethyldithiocarbamate photometric method of ISO 2590 [Withdrawn without replacement]
- ISO 602:2015 Coal — Determination of mineral matter
- ISO 603 Bonded abrasive products — Dimensions
- ISO 603-1:1999 Part 1: Grinding wheels for external cylindrical grinding between centres
- ISO 603-2:1999 Part 2: Grinding wheels for centreless external cylindrical grinding
- ISO 603-3:1999 Part 3: Grinding wheels for internal cylindrical grinding
- ISO 603-4:1999 Part 4: Grinding wheels for surface grinding/peripheral grinding
- ISO 603-5:1999 Part 5: Grinding wheels for surface grinding/face grinding
- ISO 603-6:1999 Part 6: Grinding wheels for tool and tool room grinding
- ISO 603-7:1999 Part 7: Grinding wheels for manually guided grinding
- ISO 603-8:1999 Part 8: Grinding wheels for deburring and fettling/snagging
- ISO 603-9:1999 Part 9: Grinding wheels for high-pressure grinding
- ISO 603-10:1999 Part 10: Stones for honing and superfinishings
- ISO 603-11:1999 Part 11: Hand finishing sticks
- ISO 603-12:1999 Part 12: Grinding wheels for deburring and fettling on a straight grinder
- ISO 603-13:1999 Part 13: Grinding wheels for deburring and fettling on a vertical grinder
- ISO 603-14:1999 Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder
- ISO 603-15:1999 Part 15: Grinding wheels for cutting-off on stationary or mobile cutting-off machines
- ISO 603-16:1999 Part 16: Grinding wheels for cutting-off on hand held power tools
- ISO 603-17:2014 Part 17: Spindle mounted wheels (ISO type 52)
- ISO 603-18:2013 Part 18: Grinding wheels for flat glass edge grinding machines
- ISO 604:2002 Plastics — Determination of compressive properties
- ISO 605:1991 Pulses — Determination of impurities, size, foreign odours, insects, and species and variety — Test methods
- ISO 606:2015 Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
- ISO 607:1980 Surface active agents and detergents — Methods of sample division
- ISO/R 608:1967 Classical V-belts — Lengths (sections A, B, C, D, and E) [Withdrawn: replaced with ISO 4184]
- ISO 609:1996 Solid mineral fuels — Determination of carbon and hydrogen — High temperature combustion method
- ISO 610:1990 High-tensile steel chains (round link) for chain conveyors and coal ploughs
- ISO 611:2003 Road vehicles — Braking of automotive vehicles and their trailers — Vocabulary
- ISO 612:1978 Road vehicles — Dimensions of motor vehicles and towed vehicles — Terms and definitions
- ISO 613:2000 Ships and marine technology — Magnetic compasses, binnacles and azimuth reading devices — Class B [Withdrawn: replaced by ISO 25862]
- ISO 614:2012 Ships and marine technology — Toughened safety glass panes for rectangular windows and side scuttles — Punch method of non-destructive strength testing
- ISO/R 615:1967 Methods for determining the mechanical properties of the weld metal deposited by electrodes 3,15 mm or more in diameter [Withdrawn without replacement]
- ISO 616:1995 Coke — Determination of shatter indices
- ISO/R 617:1967 Calculation of rectangular symmetrical fillet welds statically loaded in such a way that the transverse section is not under any normal stress [Withdrawn without replacement]
- ISO 618:1974 Paper — Articles of stationery that include detachable sheets — Overall trimmed sizes [Withdrawn without replacement]
- ISO 619:1981 Manganese ores — Determination of chromium content — Diphenylcarbazide photometric method and silver persulphate titrimetric method
- ISO 620:1975 Manganese ores — Determination of zinc content — Polarographic method (zinc content between 0,005 and 0,1 %) [Withdrawn without replacement]
- ISO 621:1981 Manganese ores — Determination of metallic iron content (metallic iron content not exceeding 2 %) — Sulphosalicylic acid photometric method [Withdrawn without replacement]
- ISO 622:2016 Solid mineral fuels — Determination of phosphorus content — Reduced molybdophosphate photometric method
- ISO 623:1974 Paper and board — Folders and files — Sizes [Withdrawn without replacement]
- ISO 624:1974 Pulps — Determination of dichloromethane soluble matter [Withdrawn: replaced with ISO 14453]
- ISO 625:1996 Solid mineral fuels — Determination of carbon and hydrogen — Liebig method
- ISO/R 626:1967 Strength calculation of butt welded joints [Withdrawn without replacement]
- ISO/R 627:1967 Fundamental welding positions — Definitions and values of angles of slope and rotation for butt welds for these positions [Withdrawn: replaced by ISO 6947]
- ISO/R 628:1967 Pesticides — Common names — Seventh series of terms [Withdrawn: replaced with ISO 1750]
- ISO 629:1982 Steel and cast iron — Determination of manganese content — Spectrophotometric method
- ISO 630 Structural steels
- ISO 630-1:2011 Part 1: General technical delivery conditions for hot-rolled products
- ISO 630-2:2011 Part 2: Technical delivery conditions for structural steels for general purposes
- ISO 630-3:2012 Part 3: Technical delivery conditions for fine-grain structural steels
- ISO 630-4:2012 Part 4: Technical delivery conditions for high-yield-strength quenched and tempered structural steel plates
- ISO 630-5:2014 Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
- ISO 630-6:2014 Part 6: Technical delivery conditions for seismic-improved structural steels for building
- ISO 631:1975 Mosaic parquet panels — General characteristics
- ISO/R 632:1967 Methods of test for determining whether an electrode is a deep penetration electrode [Withdrawn without replacement]
- ISO 633:2019 Cork — Vocabulary
- ISO/R 634:1967 Aircraft — Methods of test for general purpose electrical cables with copper conductors [Withdrawn without replacement]
- ISO/R 635:1967 Welding consumables — Code of symbols for covered electrodes for arc welding of mild steels and low alloy high tensile steels [Withdrawn without replacement]
- ISO 636:2017 Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification
- ISO 637:1975 Filler rods for gas welding of mild steels and low alloy high tensile steels — Determination of mechanical properties of deposited weld metal [Withdrawn without replacement]
- ISO 638 Paper, board, pulps and cellulosic nanomaterials — Determination of dry matter content by oven-drying method
- ISO 638-1:2021 Part 1: Materials in solid form
- ISO 638-2:2021 Part 2: Suspensions of cellulosic nanomaterials
- ISO 639 Codes for the representation of names of languages
- ISO 639-1:2002 Part 1: Alpha-2 code
- ISO 639-2:1998 Part 2: Alpha-3 code
- ISO 639-3:2007 Part 3: Alpha-3 code for comprehensive coverage of languages
- ISO 639-4:2010 Part 4: General principles of coding of the representation of names of languages and related entities, and application guidelines
- ISO 639-5:2008 Part 5: Alpha-3 code for language families and groups
- ISO 639-6:2009 Part 6: Alpha-4 code for comprehensive coverage of language variants [Withdrawn, no replacement]
- ISO 640:1984 Metallic materials — Hardness test — Calibration of standardized blocks to be used for Vickers hardness testing machines HV 0,2 to HV 100 [Withdrawn: replaced with ISO 6507-3]
- ISO 640-2:1993 Metallic materials — Calibration of standardized blocks to be used for Vickers hardness testing machines — Part 2: Less than HV 0,2 [Withdrawn: replaced with ISO 6507-3]
- ISO 641:1975 Laboratory glassware — Interchangeable spherical ground joints
- ISO 642:1999 Steel — Hardenability test by end quenching (Jominy test)
- ISO 643:2019 Steels — Micrographic determination of the apparent grain size
- ISO/R 644:1967 Conventional signs to be used in schemes for the installations of ventilation systems in ships [Withdrawn without replacement]
- ISO/R 645:1967 Statistics — Vocabulary and symbols — First series [Withdrawn: replaced with ISO 3534]
- ISO/IEC 646:1991 Information technology — ISO 7-bit coded character set for information interchange
- ISO 647:2017 Brown coals and lignites — Determination of the yields of tar, water, gas and coke residue by low temperature distillation
- ISO 648:2008 Laboratory glassware — Single-volume pipettes
- ISO 649 Laboratory glassware — Density hydrometers for general purposes
- ISO 649-1:1981 Part 1: Specification
- ISO 649-2:1981 Part 2: Test methods and use
- ISO 650:1977 Relative density 60/60 degrees F hydrometers for general purposes
- ISO 651:1975 Solid-stem calorimeter thermometers [Withdrawn without replacement]
- ISO 652:1975 Enclosed-scale calorimeter thermometers [Withdrawn without replacement]
- ISO 653:1980 Long solid-stem thermometers for precision use [Withdrawn without replacement]
- ISO 654:1980 Short solid-stem thermometers for precision use [Withdrawn without replacement]
- ISO 655:1980 Long enclosed-scale thermometers for precision use [Withdrawn without replacement]
- ISO 656:1980 Short enclosed-scale thermometers for precision use [Withdrawn without replacement]
- ISO 657 Hot-rolled steel sections
- ISO 658:2002 Oilseeds — Determination of content of impurities
- ISO 659:2009 Oilseeds — Determination of oil content (Reference method)
- ISO 660:2020 Animal and vegetable fats and oils — Determination of acid value and acidity
- ISO 661:2003 Animal and vegetable fats and oils — Preparation of test sample
- ISO 662:2016 Animal and vegetable fats and oils — Determination of moisture and volatile matter content
- ISO 663:2017 Animal and vegetable fats and oils — Determination of insoluble impurities content
- ISO 664:2008 Oilseeds — Reduction of laboratory sample to test sample
- ISO 665:2020 Oilseeds — Determination of moisture and volatile matter content
- ISO 666:2012 Machine tools — Mounting of grinding wheels by means of hub flanges
- ISO 667:1981 Rubber, compounded — Determination of cure rate — Shearing disk method [Withdrawn: replaced with ISO 289-2]
- ISO 668:2020 Series 1 freight containers — Classification, dimensions and ratings
- ISO 669:2016 Resistance welding — Resistance welding equipment — Mechanical and electrical requirements
- ISO/R 670:1968 Straight resistance spot welding electrodes — Mechanical and electrical requirements [Withdrawn: replaced with ISO 5184]
- ISO 671:1982 Steel and cast iron — Determination of sulphur content — Combustion titrimetric method
- ISO 672:1978 Soaps — Determination of moisture and volatile matter content — Oven method
- ISO 673:1981 Soaps — Determination of content of ethanol-insoluble matter
- ISO 674:1988 Metallic materials — Hardness test — Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A – B – C – D – E – F – G – H – K) [Withdrawn: replaced with ISO 6508-3]
- ISO 675:2014 Textiles — Woven fabrics — Determination of dimensional change on commercial laundering near the boiling point
- ISO 676:1995 Spices and condiments — Botanical nomenclature
- ISO 677:1976 Straight bevel gears for general engineering and heavy engineering — Basic rack
- ISO 678:1976 Straight bevel gears for general engineering and heavy engineering — Modules and diametral pitches
- ISO 679:2009 Cement — Test methods — Determination of strength
- ISO 680:1990 Cement — Test methods — Chemical analysis [Withdrawn: replaced with ISO 29581-1]
- ISO/R 681:1968 Chemical analysis of cements — Minor constituents of Portland cement [Withdrawn without replacement]
- ISO/R 682:1968 Chemical analysis of cements — Determination of sulphur as sulphide [Withdrawn without replacement]
- ISO 683 Heat-treatable steels, alloy steels and free-cutting steels
- ISO 683-1:2016 Part 1: Non-alloy steels for quenching and tempering
- ISO 683-2:2016 Part 2: Alloy steels for quenching and tempering
- ISO 683-3:2022 Part 3: Case-hardening steels
- ISO 683-4:2016 Part 4: Free-cutting steels
- ISO 683-5:2017 Part 5: Nitriding steels
- ISO 683-14:2004 Part 14: Hot-rolled steels for quenched and tempered springs
- ISO 683-15:1992 Part 15: Valve steels for internal combustion engines
- ISO 683-17:2014 Part 17: Ball and roller bearing steels
- ISO 683-18:2014 Part 18: Bright steel products
- ISO 684:1974 Analysis of soaps — Determination of total free alkali
- ISO 685:2020 Analysis of soaps — Determination of total alkali content and total fatty matter content
- ISO 686:1985 Photography — 35 mm filmstrips — Specifications for double-frame and single-frame formats [Withdrawn without replacement]
- ISO 687:2010 Solid mineral fuels — Coke — Determination of moisture in the general analysis test sample
- ISO 688:1975 Filler rods for braze welding — Determination of characteristics of deposited metal [Withdrawn without replacement]
- ISO 689:1975 Microcopying — ISO micromire — Description and use for checking a reading apparatus [Withdrawn without replacement]
- ISO 690:2010 Information and documentation — Guidelines for bibliographic references and citations to information resources
- ISO 691:2005 Assembly tools for screws and nuts — Wrench and socket openings — Tolerances for general use
- ISO 692:1982 Pulps — Determination of alkali solubility
- ISO 693:1982 Dimensions of seam welding wheel blanks
- ISO 694:2000 Ships and marine technology — Positioning of magnetic compasses in ships [Withdrawn: replaced by ISO 25862]
- ISO 695:1991 Glass — Resistance to attack by a boiling aqueous solution of mixed alkali — Method of test and classification
- ISO 696:1975 Surface active agents — Measurement of foaming power — Modified Ross-Miles method
- ISO 697:1981 Surface active agents — Washing powders — Determination of apparent density — Method by measuring the mass of a given volume
- ISO 698:1975 Filler rods for braze welding — Determination of conventional bond strength on steel, cast iron and other metals [Withdrawn without replacement]
- ISO 699:2015 Pulps — Determination of alkali resistance
ISO 700 – ISO 999[edit]
- ISO 700:1982 Power sources for manual metal arc welding with covered electrodes and for the TIG process [Withdrawn: replaced by IEC 60974-1:1998, now withdrawn without replacement]
- ISO 701:1998 International gear notation — Symbols for geometrical data
- ISO 702 Machine tools — Connecting dimensions of spindle noses and work holding chucks
- ISO 702-1:2009 Part 1: Conical connection
- ISO 702-2:2007 Part 2: Camlock type
- ISO 702-3:2007 Part 3: Bayonet type
- ISO 702-4:2004 Part 4: Cylindrical connection
- ISO 703:2017 Conveyor belts — Transverse flexibility (troughability) — Test method
- ISO 704:2009 Terminology work — Principles and methods
- ISO 705:2015 Rubber latex — Determination of density between 5 degrees C and 40 degrees C
- ISO 706:2004 Rubber latex — Determination of coagulum content (sieve residue)
- ISO 707:2008 Milk and milk products — Guidance on sampling
- ISO/R 708:1968 Filler rods for gas welding — Test to determine the compatibility of steel filler rods and the parent metal in the welding of steels [Withdrawn without replacement]
- ISO 709:2001 Essential oils — Determination of ester value
- ISO 710 Graphical symbols for use on detailed maps, plans and geological cross-sections
- ISO 710-1:1974 Part 1: General rules of representation
- ISO 710-2:1974 Part 2: Representation of sedimentary rocks
- ISO 710-3:1974 Part 3: Representation of magmatic rocks
- ISO 710-4:1982 Part 4: Representation of metamorphic rocks
- ISO 710-5:1989 Part 5: Representation of minerals
- ISO 710-6:1984 Part 6: Representation of contact rocks and rocks which have undergone metasomatic, pneumatolytic or hydrothermal transformation or transformation by weathering
- ISO 710-7:1984 Part 7: Tectonic symbols
- ISO 711:1985 Cereals and cereal products — Determination of moisture content (Basic reference method) [Withdrawn without replacement]
- ISO 712:2009 Cereals and cereal products — Determination of moisture content — Reference method
- ISO 713:1975 Zinc — Determination of lead and cadmium contents — Polarographic method [Withdrawn without replacement]
- ISO 714:1975 Zinc — Determination of iron content — Photometric method
- ISO 715:1975 Zinc — Determination of lead content — Polarographic method [Withdrawn without replacement]
- ISO 716:1986 Metallic materials — Hardness test — Verification of Rockwell hardness testing machines (scales A – B – C – D – E – F – G – H – K) [Withdrawn: replaced with ISO 6508-2]
- ISO 717 Acoustics — Rating of sound insulation in buildings and of building elements
- ISO 717-1:2020 Part 1: Airborne sound insulation
- ISO 717-2:2020 Part 2: Impact sound insulation
- ISO 718:1990 Laboratory glassware — Thermal shock and thermal shock endurance — Test methods
- ISO 719:2020 Glass — Hydrolytic resistance of glass grains at 98 °C — Method of test and classification
- ISO 720:2020 Glass — Hydrolytic resistance of glass grains at 121 °C — Method of test and classification
- ISO 721:1991 Rock drilling equipment — Integral stems
- ISO 722:1991 Rock drilling equipment — Hollow drill steels in bar form, hexagonal and round
- ISO 723:1991 Rock drilling equipment — Forged collared shanks and corresponding chuck bushings for hollow hexagonal drill steels
- ISO 724:1993 ISO general-purpose metric screw threads — Basic dimensions
- ISO 725:2009 ISO inch screw threads — Basic dimensions
- ISO 726:1982 Metallic materials — Hardness test — Calibration of standardized blocks to be used for Brinell hardness testing machines [Withdrawn: replaced with ISO 6506-3]
- ISO 727 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure
- ISO 727-1:2002 Part 1: Metric series
- ISO 727-2:2005 Part 2: Inch-based series
- ISO 728:2021 Coke — Size analysis by sieving
- ISO 729:1988 Oilseeds — Determination of acidity of oils
- ISO 730:2009 Agricultural wheeled tractors — Rear-mounted three-point linkage — Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4
- ISO 731 Formic acid for industrial use — Methods of test
- ISO 731-1:1977 Formic acid for industrial use — Methods of test — Part 1: General [Withdrawn without replacement]
- ISO 731-2:1977 Formic acid for industrial use — Methods of test — Part 2: Determination of total acidity — Titrimetric method [Withdrawn without replacement]
- ISO 731-3:1977 Formic acid for industrial use — Methods of test — Part 3: Determination of content of other acids — Potentiometric method [Withdrawn without replacement]
- ISO 731-4:1977 Formic acid for industrial use — Methods of test — Part 4: Visual limit test for inorganic chlorides [Withdrawn without replacement]
- ISO 731-5:1977 Formic acid for industrial use — Methods of test — Part 5: Visual limit test for inorganic sulphates [Withdrawn without replacement]
- ISO 731-6:1977 Formic acid for industrial use — Methods of test — Part 6: Determination of iron content — 2,2'- Bipyridyl photometric method [Withdrawn without replacement]
- ISO 731-7:1977 Formic acid for industrial use — Methods of test — Part 7: Determination of low contents of other volatile acids — Titrimetric method after distillation [Withdrawn without replacement]
- ISO 732:2000 Photography — 120-size and 220-size films — Dimensions
- ISO/R 733:1968 Hexagon bolts and nuts — Metric series — Tolerances on widths across flats, widths across corners [Withdrawn: replaced with ISO 4759-1]
- ISO 734:2015 Oilseed meals — Determination of oil content — Extraction method with hexane (or light petroleum)
- ISO 735:1977 Oilseed residues — Determination of ash insoluble in hydrochloric acid
- ISO 736:1977 Oilseed residues — Determination of diethyl ether extract [Withdrawn without replacement]
- ISO 737:1975 Coniferous sawn timber — Sizes — Methods of measurement
- ISO 738:2015 Coniferous sawn timber — Sizes — Permissible deviations and shrinkage [Withdrawn without replacement]
- ISO 739:1976 Sodium carbonate for industrial use — Preparation and storage of test samples
- ISO 740:1976 Sodium carbonate for industrial use — Determination of total soluble alkalinity — Titrimetric method
- ISO 741:1976 Sodium carbonate for industrial use — Determination of sodium hydrogen carbonate content — Titrimetric method [Withdrawn without replacement]
- ISO 742:1973 Sodium carbonate for industrial use — Determination of chloride content — Mercurimetric method [Withdrawn without replacement]
- ISO 743:1976 Sodium carbonate for industrial use — Determination of sulphate content — Barium sulphate gravimetric method
- ISO/R 744:1968 Sodium carbonate for industrial use — Determination of iron content — 2,2'- Bipyridyl photometric method [Withdrawn without replacement]
- ISO 745:1976 Sodium carbonate for industrial use — Determination of loss of mass and of non-volatile matter at 250 degrees C [Withdrawn without replacement]
- ISO 746:1976 Sodium carbonate for industrial use — Determination of matter insoluble in water at 50 degrees C
- ISO/R 747:1968 Sodium carbonate for industrial use — Expression of test results [Withdrawn without replacement]
- ISO 748:2021 Hydrometry — Measurement of liquid flow in open channels using current-meters or floats — Velocity area methods using point velocity measurements
- ISO 749:1977 Oilseed residues — Determination of total ash
- ISO 750:1998 Fruit and vegetable products — Determination of titratable acidity
- ISO 751:1998 Fruit and vegetable products — Determination of water-insoluble solids
- ISO 752:2004 Zinc ingots
- ISO 753 Acetic acid for industrial use — Methods of test
- ISO 753-1:1981 Part 1: General [Withdrawn without replacement]
- ISO 753-2:1981 Part 2: Determination of acetic acid content — Titrimetric method [Withdrawn without replacement]
- ISO 753-3:1981 Part 3: Determination of formic acid content — Iodometric method [Withdrawn without replacement]
- ISO 753-4:1981 Part 4: Determination of acetaldehyde monomer content — Titrimetric method [Withdrawn without replacement]
- ISO 753-5:1981 Part 5: Determination of total acetaldehyde content — Titrimetric method [Withdrawn without replacement]
- ISO 753-6:1981 Part 6: Determination of permanganate index [Withdrawn without replacement]
- ISO 753-7:1981 Part 7: Determination of dichromate index [Withdrawn without replacement]
- ISO 753-8:1981 Part 8: Visual limit test for inorganic chlorides [Withdrawn without replacement]
- ISO 753-9:1981 Part 9: Visual limit test for inorganic sulphates [Withdrawn without replacement]
- ISO 753-10:1981 Part 10: Visual limit test for heavy metals (including iron) [Withdrawn without replacement]
- ISO 754:1982 Acetic anhydride for industrial use — Methods of test [Withdrawn without replacement]
- ISO 755 Butan-1-ol for industrial use — Methods of test
- ISO 755-1:1981 Part 1: General [Withdrawn without replacement]
- ISO 755-2:1981 Part 2: Determination of acidity — Titrimetric method [Withdrawn without replacement]
- ISO 755-3:1981 Part 3: Sulphuric acid colour test [Withdrawn without replacement]
- ISO 756 Propan-2-ol for industrial use — Methods of test
- ISO 756-1:1981 Part 1: General
- ISO 756-2:1981 Part 2: Determination of acidity — Titrimetric method [Withdrawn without replacement]
- ISO 756-3:1981 Part 3: Test for miscibility with water [Withdrawn without replacement]
- ISO 757 Acetone for industrial use — Methods of test
- ISO 757-1:1982 Part 1: General [Withdrawn without replacement]
- ISO 757-2:1982 Part 2: Determination of acidity to phenolphthalein — Titrimetric method [Withdrawn without replacement]
- ISO 757-3:1982 Part 3: Test for miscibility with water [Withdrawn without replacement]
- ISO 757-4:1983 Part 4: Determination of permanganate time [Withdrawn without replacement]
- ISO 757-5:1982 Part 5: Control test with Agulhon's reagent [Withdrawn without replacement]
- ISO 758:1976 Liquid chemical products for industrial use — Determination of density at 20 degrees C
- ISO 759:1981 Volatile organic liquids for industrial use — Determination of dry residue after evaporation on water bath — General method
- ISO 760:1978 Determination of water — Karl Fischer method (General method)
- ISO 761:1977 Acetic anhydride and butan-1-ol for industrial use — Determination of bromine number [Withdrawn without replacement]
- ISO 762:2003 Fruit and vegetable products — Determination of mineral impurities content
- ISO 763:2003 Fruit and vegetable products — Determination of ash insoluble in hydrochloric acid
- ISO 764:2020 Horology — Magnetic resistant watches
- ISO 765:2016 Pesticides considered not to require common names
- ISO 766:1972 Fibre building boards — Determination of dimensions of test pieces [Withdrawn: replaced with ISO 9424]
- ISO 767:1975 Fibre building boards — Determination of moisture content [Withdrawn: replaced with ISO 9425]
- ISO 768:1972 Fibre building boards — Determination of bending strength [Withdrawn without replacement]
- ISO 769:1972 Fibre building boards — Hard and medium boards — Determination of water absorption and of swelling in thickness after immersion in water [Withdrawn without replacement]
- ISO 770:2002 Crude or rectified oils of Eucalyptus globulus (Eucalyptus globulus Labill.)
- ISO 771:1977 Oilseed residues — Determination of moisture and volatile matter content
- ISO 772:2011 Hydrometry — Vocabulary and symbols
- ISO/R 773:1969 Rectangular or square parallel keys and their corresponding keyways (Dimensions in millimetres) [Withdrawn without replacement]
- ISO/R 774:1969 Taper keys with or without gib head and their corresponding keyways (Dimensions in millimetres) [Withdrawn without replacement]
- ISO/R 775:1969 Cylindrical and 1/10 conical shaft ends [Withdrawn without replacement]
- ISO 776:2011 Pulps — Determination of acid-insoluble ash
- ISO 777:2005 Paper, board and pulp — Determination of acid-soluble calcium [Withdrawn: replaced with ISO 12830]
- ISO 778:2005 Paper, board and pulp — Determination of acid-soluble copper [Withdrawn: replaced with ISO 12830]
- ISO 779:2005 Paper, board and pulp — Determination of acid-soluble iron [Withdrawn: replaced with ISO 12830]
- ISO 780:2015 Packaging – Distribution packaging — Graphical symbols for handling and storage of packages
- ISO/R 781:1968 Measurement of fluid flow by means of Venturi tubes inserted in circular cross-section conduits running full [Withdrawn: replaced with ISO 5167, later ISO 5167-1]
- ISO 782:1975 Microcopying — Measurement of screen luminance of microfilm readers [Withdrawn without replacement, but later restored as ISO 7565]
- ISO 783:1999 Metallic materials — Tensile testing at elevated temperature [Withdrawn: replaced with ISO 6892-2]
- ISO/R 784:1968 Conventional signs to be used in schemes for the installations of sanitary systems in ships [Withdrawn without replacement]
- ISO/R 785:1968 Pesticides — Common names — Eighth series of terms [Withdrawn: replaced with ISO 1750]
- ISO/R 786:1968 Units and symbols for refrigeration [Withdrawn without replacement]
- ISO 787 General methods of test for pigments and extenders
- ISO 787-1:1982 Part 1: Comparison of colour of pigments
- ISO 787-2:1981 Part 2: Determination of matter volatile at 105 degrees C
- ISO 787-3:2000 Part 3: Determination of matter soluble in water — Hot extraction method
- ISO 787-4:1981 Part 4: Determination of acidity or alkalinity of the aqueous extract
- ISO 787-5:1980 Part 5: Determination of oil absorption value
- ISO 787-7:2009 Part 7: Determination of residue on sieve — Water method — Manual procedure
- ISO 787-8:2000 Part 8: Determination of matter soluble in water — Cold extraction method
- ISO 787-9:2019 Part 9: Determination of pH value of an aqueous suspension
- ISO 787-10:1993 Part 10: Determination of density — Pyknometer method
- ISO 787-11:1981 Part 11: Determination of tamped volume and apparent density after tamping
- ISO/R 787-12:1970 Part 12: Determination of [Withdrawn without replacement]
- ISO 787-13:2019 Part 13: Determination of water-soluble sulphates, chlorides and nitrates
- ISO 787-14:2019 Part 14: Determination of resistivity of aqueous extract
- ISO 787-15:2019 Part 15: Comparison of resistance to light of coloured pigments of similar types
- ISO 787-16:1986 Part 16: Determination of relative tinting strength (or equivalent colouring value) and colour on reduction of coloured pigments — Visual comparison method
- ISO 787-17:2019 Part 17: Comparison of lightening power of white pigments
- ISO 787-18:1983 Part 18: Determination of residue on sieve — Mechanical flushing procedure
- ISO 787-19:2020 Part 19: Determination of water-soluble nitrates (Salicylic acid method)
- ISO 787-20:1979 Part 20: Comparison of ease of dispersion (Oscillatory shaking method) [Withdrawn: replaced with ISO 8780-2]
- ISO 787-21:1979 Part 21: Comparison of heat stability of pigments using a stoving medium
- ISO 787-22:1980 Part 22: Comparison of resistance to bleeding of pigments
- ISO 787-23:1979 Part 23: Determination of density (using a centrifuge to remove entrained air)
- ISO 787-24:1985 Part 24: Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments — Photometric methods
- ISO 787-25:2019 Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments — Colorimetric method
- ISO 787-28:2019 Part 28: Determination of total content of polychlorinated biphenyls (PCB) by dissolution, cleanup and GC-MS
- ISO 788:2021 Ultramarine pigments
- ISO 789 Agricultural tractors — Test procedures
- ISO 789-1:2018 Part 1: Power tests for power take-off
- ISO 789-2:2018 Part 2: Rear three-point linkage lifting capacity
- ISO 789-3:2015 Part 3: Turning and clearance diameters
- ISO 789-4:1986 Part 4: Measurement of exhaust smoke
- ISO 789-5:1983 Part 5: Partial power PTO — Non-mechanically transmitted power
- ISO 789-6:2019 Part 6: Centre of gravity
- ISO 789-7:1991 Part 7: Axle power determination
- ISO 789-8:1991 Part 8: Engine air cleaner
- ISO 789-9:2018 Part 9: Power tests for drawbar
- ISO/OECD 789-10:2006 Part 10: Hydraulic power at tractor/implement interface
- ISO 789-11:1996 Part 11: Steering capability of wheeled tractors
- ISO 789-12:2000 Part 12: Low temperature starting
- ISO 789-13:2018 Part 13: Vocabulary and specimen test report
- ISO 790:1973 Freight containers — Coding and identification [Withdrawn: replaced with ISO 6346]
- ISO 791:1973 Magnesium alloys — Determination of aluminium — 8-hydroxyquinoline gravimetric method
- ISO 792:1973 Magnesium and magnesium alloys — Determination of iron — Orthophenanthroline photometric method
- ISO 793:1973 Aluminium and aluminium alloys — Determination of iron — Orthophenanthroline photometric method
- ISO 794:1976 Magnesium and magnesium alloys — Determination of copper content — Oxalyldihydrazide photometric method
- ISO 795:1976 Aluminium and aluminium alloys — Determination of copper content — Oxalyldihydrazide photometric method
- ISO 796:1973 Aluminium alloys — Determination of copper — Electrolytic method
- ISO 797:1973 Aluminium and aluminium alloys — Determination of silicon — Gravimetric method
- ISO/R 798:1968 Chemical analysis of aluminium and its alloys — Gravimetric determination of zinc in aluminium alloys (zinc content between 0.50 and 6.5 %) [Withdrawn: replaced with ISO 1784]
- ISO 799 Ships and marine technology — Pilot ladders
- ISO 799-1:2019 Part 1: Design and specification
- ISO 800:1992 Plastics — Phenolic moulding materials — Specification [Withdrawn: replaced with ISO 14526]
- ISO 801 Pulps — Determination of saleable mass in lots
- ISO 801-1:1994 Part 1: Pulp baled in sheet form
- ISO 801-2:1994 Part 2: Pulps (such as flash-dried pulps) baled in slabs
- ISO 801-3:1994 Part 3: Unitized bales
- ISO 802:1976 Aluminium oxide primarily used for the production of aluminium — Preparation and storage of test samples [Withdrawn: replaced with ISO 23028]
- ISO 803:1976 Aluminium oxide primarily used for the production of aluminium — Determination of loss of mass at 300 degrees C (conventional moisture) [Withdrawn: replaced with ISO 806]
- ISO 804:1976 Aluminium oxide primarily used for the production of aluminium — Preparation of solution for analysis — Method by alkaline fusion [Withdrawn without replacement]
- ISO 805:1976 Aluminium oxide primarily used for the production of aluminium — Determination of iron content — 1,10- Phenanthroline photometric method [Withdrawn without replacement]
- ISO 806:2004 Aluminium oxide primarily used for the production of aluminium — Determination of loss of mass at 300 degrees C and 1 000 degrees C
- ISO/R 807:1968 Chemical analysis of magnesium and magnesium alloys — Polarographic determination of zinc (zinc content between 0.1 and 4 %) [Withdrawn without replacement]
- ISO 808:1973 Aluminium and aluminium alloys — Determination of silicon — Spectrophotometric method with the reduced silicomolybdic complex
- ISO 809:1973 Magnesium and magnesium alloys — Determination of manganese — Periodate photometric method (Manganese content between 0,01 and 0,8 %)
- ISO 810:1973 Magnesium and magnesium alloys — Determination of manganese — Periodate photometric method (Manganese content less than 0,01 %)
- ISO 811:2018 Textiles — Determination of resistance to water penetration — Hydrostatic pressure test
- ISO 812:2017 Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness
- ISO 813:2019 Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method
- ISO 814:2017 Rubber, vulcanized or thermoplastic — Determination of adhesion to metal — Two-plate method
- ISO 815 Rubber, vulcanized or thermoplastic — Determination of compression set
- ISO 815-1:2019 Part 1: At ambient or elevated temperatures
- ISO 815-2:2019 Part 2: At low temperatures
- ISO 816:1983 Rubber, vulcanized — Determination of tear strength of small test pieces (Delft test pieces) [Withdrawn: replaced with ISO 34-2]
- ISO 817:2014 Refrigerants — Designation and safety classification
- ISO 818:1975 Fibre building boards — Definition — Classification [Withdrawn without replacement]
- ISO 819:1975 Fibre building boards — Determination of density [Withdrawn: replaced with ISO 9427]
- ISO 820:1975 Particle boards — Definition and classification [Withdrawn without replacement]
- ISO 821:1975 Particle boards — Determination of dimensions of test pieces [Withdrawn: replaced with ISO 9424]
- ISO 822:1975 Particle boards — Determination of density [Withdrawn: replaced with ISO 9427]
- ISO 823:1975 Particle boards — Determination of moisture content [Withdrawn: replaced with ISO 9425]
- ISO/R 824 Household refrigerators
- ISO/R 824-1:1968 Part 1: Performance requirements [Withdrawn: replaced with ISO 7371]
- ISO/R 825 Household refrigerators
- ISO/R 825-1:1968 Part 1: Special low-temperature compartments for the storage of frozen foodstuffs [Withdrawn: replaced with ISO 7371]
- ISO/R 826:1968 Mechanical property limits for rolled products of aluminium and aluminium alloys [Withdrawn without replacement]
- ISO/R 827:1968 Mechanical property limits for extruded products of aluminium and aluminium alloys [Withdrawn without replacement]
- IEC/TR 828:1988 Pin allocations for future microprocessor systems using the IEC 603-2 connector [Withdrawn without replacement]
- ISO/R 829:1968 Mechanical property limits for aluminium alloy forgings [Withdrawn without replacement]
- ISO 830:1999 Freight containers — Vocabulary
- ISO/R 831:1968 Rules for construction of stationary boilers [Withdrawn without replacement]
- ISO 832:1994 Information and documentation — Bibliographic description and references — Rules for the abbreviation of bibliographic terms
- ISO 833:1974 Information and documentation — International list of periodical word title abbreviations [Withdrawn without replacement]
- ISO 834 Fire-resistance tests — Elements of building construction
- ISO 834-1:1999 Part 1: General requirements
- ISO 834-2:2019 Part 2: Requirements and recommendations for measuring furnace exposure on test samples
- ISO/TR 834-3:2012 Part 3: Commentary on test method and guide to the application of the outputs from the fire-resistance test
- ISO 834-4:2000 Part 4: Specific requirements for loadbearing vertical separating elements
- ISO 834-5:2000 Part 5: Specific requirements for loadbearing horizontal separating elements
- ISO 834-6:2000 Part 6: Specific requirements for beams
- ISO 834-7:2000 Part 7: Specific requirements for columns
- ISO 834-8:2002 Part 8: Specific requirements for non-loadbearing vertical separating elements
- ISO 834-9:2003 Part 9: Specific requirements for non-loadbearing ceiling elements
- ISO 834-10:2014 Part 10: Specific requirements to determine the contribution of applied fire protection materials to structural steel elements
- ISO 834-11:2014 Part 11: Specific requirements for the assessment of fire protection to structural steel elements
- ISO 834-12:2012 Part 12: Specific requirements for separating elements evaluated on less than full scale furnaces
- ISO 834-13:2019 Part 13: Requirements for the testing and assessment of applied fire protection to steel beams with web openings
- ISO 834-14:2019 Part 14: Requirements for the testing and assessment of applied fire protection to solid steel bar
- ISO 835:2007 Laboratory glassware — Graduated pipettes
- ISO 836:2001 Terminology for refractories
- ISO/R 837:1968 Aircraft seat rails and pins [Withdrawn: replaced with ISO 7166]
- ISO 838:1974 Paper — Holes for general filing purposes — Specifications
- ISO 839 Milling machine arbors with 7/24 tapers
- ISO 839-1:2006 Part 1: Dimensions and designation
- ISO 839-2:1977 Part 2: Accessories
- ISO 840:1973 Numerical control of machines — 7-bit coded character set [Withdrawn: replaced with ISO 6983-1]
- ISO 841:2001 Industrial automation systems and integration — Numerical control of machines — Coordinate system and motion nomenclature
- ISO 842:1984 Raw materials for paints and varnishes — Sampling [Withdrawn: replaced with ISO 15528]
- ISO 843:1997 Information and documentation — Conversion of Greek characters into Latin characters
- ISO 844:2014 Rigid cellular plastics — Determination of compression properties
- ISO 845:2006 Cellular plastics and rubbers — Determination of apparent density
- ISO 846:2019 Plastics — Evaluation of the action of microorganisms
- ISO/R 847:1968 Phosphoric acid for industrial use — Determination of sulphate content — Volumetric method [Withdrawn: replaced with ISO 2997]
- ISO 848:1981 Phosphoric acid for industrial use — Determination of calcium content — Titrimetric method [Withdrawn without replacement]
- ISO/R 849:1968 Phosphoric acid for industrial use — Determination of iron content — 2,2'- Bipyridyl spectrophotometric method [Withdrawn without replacement]
- ISO 850:1976 Sodium tripolyphosphate for industrial use — Determination of matter insoluble in water [Withdrawn without replacement]
- ISO 851:1976 Sodium tripolyphosphate for industrial use — Measurement of pH — Potentiometric method [Withdrawn without replacement]
- ISO/R 852:1968 Sodium tripolyphosphate and sodium pyrophosphate for industrial use — Determination of iron content — 2,2'- Bipyridyl spectrophotometric method [Withdrawn without replacement]
- ISO 853:1976 Sodium tripolyphosphate and sodium pyrophosphate for industrial use — Determination of loss on ignition [Withdrawn without replacement]
- ISO/R 854:1968 Requirements for 28-volt D.C. flat strip fuses for aircraft [Withdrawn without replacement]
- ISO 855:2003 Oil of lemon [Citrus limon (L.) Burm. f.], obtained by expression
- ISO 856:2006 Oil of peppermint (Mentha x piperita L.)
- ISO 857 Welding and allied processes — Vocabulary
- ISO 857-2:2005 Part 2: Soldering and brazing processes and related terms
- ISO 858:1973 Fishing nets — Designation of netting yarns in the Tex System
- ISO/R 859:1968 Testing and rating room air conditioners [Withdrawn: replaced with ISO 5151]
- ISO 860:2007 Terminology work — Harmonization of concepts and terms
- ISO/R 861:1968 Hexagon socket head cap screws — Metric series [Withdrawn: replaced with ISO 4762]
- ISO 862:1984 Surface active agents — Vocabulary
- ISO 863:2008 Cement — Test methods — Pozzolanicity test for pozzolanic cements
- ISO 864:1988 Arc welding — Solid and tubular cored wires which deposit carbon and carbon manganese steel — Dimensions of wires, spools, rims and coils [Withdrawn without replacement]
- ISO 865:1981 Slots in platens for projection welding machines
- ISO 866:2016 Centre drills for centre holes without protecting chamfers — Type A
- ISO/R 867:1968 Spindle noses and face plates — Bayonet type — Sizes for interchangeability — Metric series [Withdrawn: replaced with ISO 702-3]
- ISO 868:2003 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
- ISO/R 869:1968 Plastics — Preparation of specimens for optical tests on plastics materials — Moulding method [Withdrawn without replacement]
- ISO/R 870:1968 Plastics — Preparation of specimens for optical tests on plastics materials — Casting method [Withdrawn without replacement]
- ISO 871:2006 Plastics — Determination of ignition temperature using a hot-air furnace
- ISO/R 872:1968 Plastics — Determination of ash of unplasticized cellulose acetate [Withdrawn: replaced with ISO 3451-3]
- ISO 873:1980 Peaches — Guide to cold storage
- ISO 874:1980 Fresh fruits and vegetables — Sampling
- ISO 875:1999 Essential oils — Evaluation of miscibility in ethanol
- ISO/R 876:1968 Special method of mechanical testing to determine the coding for deep penetration electrodes [Withdrawn without replacement]
- ISO 877 Plastics — Methods of exposure to solar radiation
- ISO 877-1:2009 Part 1: General guidance
- ISO 877-2:2009 Part 2: Direct weathering and exposure behind window glass
- ISO 877-3:2018 Part 3: Intensified weathering using concentrated solar radiation
- ISO/R 878:1968 Plastics — Determination of resistance of plastics to color change upon exposure to light of the enclosed carbon arc [Withdrawn: replaced with ISO 4892]
- ISO/R 879:1968 Plastics — Determination of resistance of plastics to color change upon exposure to light of a xenon lamp [Withdrawn: replaced with ISO 4892]
- ISO 880:1981 Asbestos-cement siding shingles [Withdrawn without replacement]
- ISO 881:1980 Asbestos-cement pipes, joints and fittings for sewerage and drainage [Withdrawn without replacement]
- ISO 882 Cardamom (Elettaria cardamomum (Linnaeus) Maton var. minuscula Burkill) — Specification
- ISO 882-1:1993 Part 1: Whole capsules
- ISO 882-2:1993 Part 2: Seeds
- ISO 883:2013 Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions
- ISO/R 884:1968 Pictorial marking of transit packages containing photographic materials sensitive to radiant energy [Withdrawn: replaced with ISO 780]
- ISO 885:2000 General purpose bolts and screws — Metric series — Radii under the head
- ISO 886:1973 Aluminium and aluminium alloys — Determination of manganese — Photometric method (Manganese content between 0,005 and 1,5 %)
- ISO 887:2000 Plain washers for metric bolts, screws and nuts for general purposes — General plan
- ISO 888:2012 Fasteners — Bolts, screws and studs — Nominal lengths and thread lengths
- ISO/R 889:1968 Test code for stationary steam generators of the power station type [Withdrawn without replacement]
- ISO/R 890:1968 Cinematography — Recording head gaps for two sound records on 16 mm magnetic film — Positions [Withdrawn: replaced with ISO 4242]
- ISO/R 891:1968 Cinematography — Recording head gaps for two sound records on 16 mm magnetic film — Dimensions [Withdrawn: replaced with ISO 4242]
- ISO/R 892:1968 Cinematography — Dimensions of projection reels for 8 mm motion-picture film (other than type S) [Withdrawn without replacement]
- ISO 893:1989 Surface active agents — Technical alkane sulfonates — Methods of analysis
- ISO 894:1977 Surface active agents — Technical sodium primary alkylsulphates — Methods of analysis
- ISO 895:1977 Surface active agents — Technical sodium secondary alkylsulphates — Methods of analysis
- ISO/TR 896:1977 Surface active agents — Scientific classification [Withdrawn without replacement]
- ISO 897:2000 Photography — Roll films, 126, 110 and 135-size films — Identification of the image-bearing side
- ISO 898 Mechanical properties of fasteners made of carbon steel and alloy steel[Note 3]
- ISO 899 Plastics — Determination of creep behaviour
- ISO 899-1:2017 Part 1: Tensile creep
- ISO 899-2:2003 Part 2: Flexural creep by three-point loading
- ISO 900:1977 Aluminium oxide primarily used for the production of aluminium — Determination of titanium content — Diantipyrylmethane photometric method [Withdrawn without replacement]
- ISO 901:1976 Aluminium oxide primarily used for the production of aluminium — Determination of absolute density — Pyknometer method [Withdrawn without replacement]
- ISO 902:1976 Aluminium oxide primarily used for the production of aluminium — Measurement of the angle of repose
- ISO 903:1976 Aluminium oxide primarily used for the production of aluminium — Determination of untamped density [Withdrawn without replacement]
- ISO 904:1976 Hydrochloric acid for industrial use — Determination of total acidity — Titrimetric method [Withdrawn without replacement]
- ISO 905:1976 Hydrochloric acid for industrial use — Evaluation of hydrochloric acid concentration by measurement of density [Withdrawn without replacement]
- ISO 906:1976 Hydrochloric acid for industrial use — Determination of sulphate content — Barium sulphate gravimetric method [Withdrawn without replacement]
- ISO 907:1976 Hydrochloric acid for industrial use — Determination of sulphated ash — Gravimetric method [Withdrawn without replacement]
- ISO 908:1980 Hydrochloric acid for industrial use — Determination of oxidizing or reducing substances content — Titrimetric method [Withdrawn without replacement]
- ISO/R 909:1968 Hydrochloric acid for industrial use — Determination of iron content — 2,2'- Bipyridyl spectrophotometric method [Withdrawn without replacement]
- ISO 910:1977 Sulphuric acid and oleum for industrial use — Determination of total acidity, and calculation of free sulphur trioxide content of oleum — Titrimetric method
- ISO 911:1977 Sulphuric acid for industrial use — Evaluation of sulphuric acid concentration by measurement of density [Withdrawn without replacement]
- ISO/R 912:1968 Sulphuric acid and oleum for industrial use — Determination of sulphur dioxide content — Barium sulphate gravimetric method [Withdrawn without replacement]
- ISO 913:1977 Sulphuric acid and oleum for industrial use — Determination of ash — Gravimetric method [Withdrawn without replacement]
- ISO 914:1977 Sulphuric acid and oleum for industrial use — Determination of total nitrogen content — Titrimetric method after distillation [Withdrawn without replacement]
- ISO/R 915:1968 Sulphuric acid and oleum for industrial use — Determination of iron content — 2,2'- Bipyridyl spectrophotometric method [Withdrawn without replacement]
- ISO 916:2020 Testing of refrigerating systems
- ISO 917:1989 Testing of refrigerant compressors [Withdrawn without replacement]
- ISO 918:1983 Volatile organic liquids for industrial use — Determination of distillation characteristics
- ISO/R 919:1969 Guide for the preparation of classified vocabularies (example of method) [Withdrawn: replaced with ISO 10241]
- ISO 920:1976 Wool — Determination of fibre length (barbe and hauteur) using a comb sorter
- ISO 921:1997 Nuclear energy — Vocabulary [Withdrawn without replacement]
- ISO/R 922:1969 Plastics — Polypropylene (PP) and propylene-copolymer thermoplastics — Determination of isotactic index [Withdrawn: replaced with ISO 1873-1, now replaced by ISO 9113]
- ISO 923:2000 Coal cleaning equipment — Performance evaluation
- ISO 924:1989 Coal preparation plant — Principles and conventions for flowsheets
- ISO 925:2019 Solid mineral fuels — Determination of carbonate carbon content — Gravimetric method
- ISO/R 926:1969 Solid mineral fuels — Determination of total nitrogen, sulphur, chlorine, and phosphorus — Gravimetric method [Withdrawn: replaced with ISO 333 (now withdrawn), ISO 334, ISO 352 (now withdrawn), and ISO 622]
- ISO 927:2009 Spices and condiments — Determination of extraneous matter and foreign matter content
- ISO 928:1997 Spices and condiments — Determination of total ash
- ISO 929:1980 Spices and condiments — Determination of water-insoluble ash [Withdrawn without replacement]
- ISO 930:1997 Spices and condiments — Determination of acid-insoluble ash
- ISO 931:1980 Green bananas — Guide to storage and transport
- ISO/R 932:1969 Animal fats — Determination of insoluble impurities content [Withdrawn: replaced with ISO 663]
- ISO/R 933:1969 Animal fats — Determination of moisture and volatile matter content [Withdrawn: replaced with ISO 662]
- ISO 934:1980 Animal and vegetable fats and oils — Determination of water content — Entrainment method
- ISO 935:1988 Animal and vegetable fats and oils — Determination of titre
- ISO 936:1998 Meat and meat products — Determination of total ash
- ISO 937:1978 Meat and meat products — Determination of nitrogen content (Reference method)
- ISO 938:1975 Hand-operated stillage trucks — Principal dimensions
- ISO 939:1980 Spices and condiments — Determination of moisture content — Entrainment method
- ISO 940:1979 Spices and condiments — Determination of alcohol-soluble extract [Withdrawn without replacement]
- ISO 941:1980 Spices and condiments — Determination of cold water-soluble extract
- ISO/R 942:1969 Whiteheart malleable cast iron [Withdrawn: replaced with ISO 5922]
- ISO/R 943:1969 Blackheart malleable cast iron [Withdrawn: replaced with ISO 5922]
- ISO/R 944:1969 Pearlitic malleable cast iron [Withdrawn: replaced with ISO 5922]
- ISO 945 Microstructure of cast irons
- ISO 945-1:2019 Part 1: Graphite classification by visual analysis
- ISO/TR 945-2:2011 Part 2: Graphite classification by image analysis
- ISO/TR 945-3:2016 Part 3: Matrix structures
- ISO 945-4:2019 Part 4: Test method for evaluating nodularity in spheroidal graphite cast irons
- ISO 946:1975 Grey cast iron — Beam unnotched impact test [Withdrawn without replacement]
- ISO/R 947:1969 Recommended practice for radiographic inspection of circumferential fusion welded butt joints in steel pipes up to 50 mm (2 in) wall thickness [Withdrawn: replaced with ISO 1106-3, later ISO 17636, now ISO 17636-1]
- ISO 948:1980 Spices and condiments — Sampling
- ISO 949:1987 Cauliflowers — Guide to cold storage and refrigerated transport
- ISO 950:1979 Cereals — Sampling (as grain) (Withdrawn: replaced by ISO 13690, later ISO 24333)
- ISO 951:1979 Pulses in bags — Sampling (Withdrawn: replaced by ISO 13690, later ISO 24333)
- ISO/R 952:1969 Light metal and light metal alloys — Tubes — Tensile Test [Withdrawn: replaced with ISO 6892-1]
- ISO/R 953:1969 Light metal and light metal alloys — Tubes — Drift expanding test [Withdrawn: replaced with ISO 8493]
- ISO/R 954:1969 Light metal and light metal alloys — Tubes — Bend test [Withdrawn: replaced with ISO 7438]
- ISO/R 955:1969 Aluminium and aluminium alloys — Tubes — Flattening test [Withdrawn: replaced with ISO 8492]
- ISO/R 956:1969 Light metal and light metal alloys — Wires — Tensile Test [Withdrawn: replaced with ISO 6892-1]
- ISO/R 957:1969 Aluminium and aluminium alloys — Wires — Simple torsion test [Withdrawn: replaced with ISO 7800]
- ISO/R 958:1969 Aluminium and aluminium alloys — Wires — Wrapping test [Withdrawn: replaced with ISO 7802]
- ISO 959 Pepper (Piper nigrum L.), whole or ground — Specification
- ISO 959-1:1998 Part 1: Black pepper
- ISO 959-2:1998 Part 2: White pepper
- ISO 960:1988 Plastics — Polyamides (PA) — Determination of water content [Withdrawn: replaced with ISO 15512]
- ISO/R 961:1969 Information processing — Implementation of the 6-bit and 7-bit coded character sets on 7- track 12,7 mm (0.5 in) magnetic tape [Withdrawn without replacement]
- ISO 962:1974 Information processing — Implementation of the 7- bit coded character set and its 7- bit and 8-bit extensions on 9- track 12,7 mm (0.5 in) magnetic tape
- ISO 963:1973 Information processing — Guide for the definition of 4- bit character sets derived from the 7- bit coded character set for information processing interchange [Withdrawn without replacement]
- ISO/R 964:1969 Shipbuilding details — Mating dimensions for pipeline flanges for ships
- ISO 965 ISO general purpose metric screw threads — Tolerances
- ISO/R 966:1969 Seeds — Sampling and methods of test [Withdrawn without replacement]
- ISO/R 967:1969 Pesticides — Common names — Ninth series of terms [Withdrawn: replaced with ISO 1750]
- ISO/R 968:1969 Pesticides — Common names — Tenth series of terms [Withdrawn: replaced with ISO 1750]
- ISO/R 969:1969 Pesticides — Common names — Eleventh series of terms [Withdrawn: replaced with ISO 1750]
- ISO/R 970:1969 Pesticides — Common names — Twelfth series of terms [Withdrawn: replaced with ISO 1750]
- ISO/R 971:1969 Pesticides — Common names — Thirteenth series of terms [Withdrawn: replaced with ISO 1750]
- ISO 972:1997 Chillies and capsicums, whole or ground (powdered) — Specification
- ISO 973:1999 Pimento (allspice) [Pimenta dioica (L.) Merr.], whole or ground — Specification
- ISO 974:2000 Plastics — Determination of the brittleness temperature by impact
- ISO 975:2021 Brown coals and lignites — Determination of yield of benzene-soluble extract — Semi-automatic method
- ISO 976:2013 Rubber and plastics — Polymer dispersions and rubber latices — Determination of pH
- ISO/R 977:1969 Sodium hydroxide for industrial use — Preparation and storage of test sample [Withdrawn: replaced with ISO 3195]
- ISO/R 978:1969 Sodium hydroxide for industrial use — Preparation of sample solution [Withdrawn: replaced with ISO 3195]
- ISO 979:1974 Sodium hydroxide for industrial use — Method of assay
- ISO 980:1976 Sodium hydroxide for industrial use — Determination of carbonates content — Gas-volumetric method [Withdrawn without replacement]
- ISO 981:1973 Sodium hydroxide for industrial use — Determination of chloride content — Mercurimetric method
- ISO 982:1976 Sodium hydroxide for industrial use — Determination of sulphate content — Barium sulphate gravimetric method [Withdrawn without replacement]
- ISO 983:1974 Sodium hydroxide for industrial use — Determination of iron content — 1,10- Phenanthroline photometric method [Withdrawn without replacement]
- ISO 984:1974 Sodium hydroxide for industrial use — Determination of silica content — Reduced silico-molybdic complex photometric method [Withdrawn without replacement]
- ISO 985:1974 Sodium hydroxide for industrial use — Determination of silica content — Gravimetric method by precipitation of quinoline molybdosilicate [Withdrawn without replacement]
- ISO 986:1976 Sodium hydroxide for industrial use — Determination of calcium content — EDTA (disodium salt) complexometric method [Withdrawn without replacement]
- ISO/R 987:1969 Sodium hydroxide for industrial use — Determination of water insoluble matter [Withdrawn without replacement]
- ISO/R 988:1969 Potassium hydroxide for industrial use — Preparation and storage of test sample [Withdrawn: replaced with ISO 2466]
- ISO/R 989:1969 Potassium hydroxide for industrial use — Preparation of sample solution [Withdrawn: replaced with ISO 2466]
- ISO 990:1974 Potassium hydroxide for industrial use — Method of assay [Withdrawn without replacement]
- ISO 991:1976 Potassium hydroxide for industrial use — Determination of carbonates content — Gas-volumetric method [Withdrawn without replacement]
- ISO 992:1975 Potassium hydroxide for industrial use — Determination of chlorides content — Mercurimetric method [Withdrawn without replacement]
- ISO 993:1976 Potassium hydroxide for industrial use — Determination of sulphate content — Barium sulphate gravimetric method [Withdrawn without replacement]
- ISO 994:1973 Potassium hydroxide for industrial use — Determination of iron content — 1,10- Phenanthroline photometric method [Withdrawn without replacement]
- ISO 995:1975 Potassium hydroxide for industrial use — Determination of silica content — Reduced silico-molybdic complex photometric method [Withdrawn without replacement]
- ISO 996:1976 Potassium hydroxide for industrial use — Determination of silica content — Gravimetric method by precipitation of quinoline molybdosilicate [Withdrawn without replacement]
- ISO 997:1976 Potassium hydroxide for industrial use — Determination of calcium content — EDTA (disodium salt) complexometric method [Withdrawn without replacement]
- ISO/R 998:1969 Potassium hydroxide for industrial use — Determination of water insoluble matter [Withdrawn without replacement]
- ISO 999:1996 Information and documentation — Guidelines for the content, organization, and presentation of indexes
ISO 1000 – ISO 1499[edit]
- ISO 1000 SI units and recommendations for the use of their multiples and of certain other units [Withdrawn 2009-11-17: replaced with ISO 80000-1]
- ISO/IEC 1001:2012 Information technology – File structure and labelling of magnetic tapes for information interchange
- ISO 1002:1983 Rolling bearings — Airframe bearings — Characteristics, boundary dimensions, tolerances, static load ratings
- ISO 1003:2008 Spices — Ginger (Zingiber officinale Roscoe) — Specification
- ISO 1004 Information processing – Magnetic ink character recognition – Print specifications
- ISO 1005 Railway rolling stock material
- ISO 1005-1:1994 Part 1: Rough-rolled tyres for tractive and trailing stock — Technical delivery conditions
- ISO 1005-2:1986 Part 2: Tyres, wheel centres and tyred wheels for tractive and trailing stock — Dimensional, balancing and assembly requirements
- ISO 1005-3:1982 Part 3: Axles for tractive and trailing stock — Quality requirements
- ISO 1005-4:1986 Part 4: Rolled or forged wheel centres for tyred wheels for tractive and trailing stock — Quality requirements
- ISO/R 1005-5:1969 Part 5: Cast wheel centres in non-alloy steel for tyred wheels for trailer stock [Withdrawn without replacement]
- ISO 1005-6:1994 Part 6: Solid wheels for tractive and trailing stock — Technical delivery conditions
- ISO 1005-7:1982 Part 7: Wheelsets for tractive and trailing stock — Quality requirements
- ISO 1005-8:1986 Part 8: Solid wheels for tractive and trailing stock — Dimensional and balancing requirements
- ISO 1005-9:1986 Part 9: Axles for tractive and trailing stock — Dimensional requirements
- ISO 1006:1983 Building construction — Modular coordination — Basic module [Withdrawn: replaced with ISO 21723]
- ISO 1007 Photography – 135-size film and magazine – Specifications
- ISO 1008:1992 Photography — Paper dimensions — Pictorial sheets
- ISO 1009:2000 Photography — Paper dimensions — Rolls for printers
- ISO 1010:1973 Photography — Colour paper for general use — Sizes of sheet material [Withdrawn: replaced with ISO 1008]
- ISO 1011:1973 Photography — Colour paper for roll paper printers — Sizes of rolls [Withdrawn: replaced with ISO 1009]
- ISO 1012:1998 Photography — Films in sheets and rolls for general use — Dimensions
- ISO 1013:2020 Coke — Determination of bulk density in a large container
- ISO 1014:2021 Coke — Determination of true relative density, apparent relative density and porosity
- ISO 1015:1992 Brown coals and lignites — Determination of moisture content — Direct volumetric method [Withdrawn without replacement]
- ISO/R 1016:1969 Brown coals and lignites — Determination of ash [Withdrawn: replaced with ISO 1171]
- ISO 1017:2006 Brown coals and lignites — Determination of acetone-soluble material
- ISO 1018:2019 Hard coal — Determination of moisture-holding capacity
- ISO 1019:1982 Cinematography — Spools, daylight loading type for 16 mm motion-picture cameras — Dimensions
- ISO 1020:1974 Cinematography — Spools, daylight loading type for double-8 mm motion-picture cameras — Dimensions [Withdrawn without replacement]
- ISO 1021:1980 Aircraft — Engine nacelle fire extinguisher apertures and doors
- ISO 1022:1988 Aerospace — Gaseous oxygen replenishment connection for use in fluid systems (old type) — Dimensions (Inch series) (Not valid for new designs) [Withdrawn: replaced with ISO 8775 on 2012-04-02]
- ISO 1023:1974 Aircraft — High pressure air charging valves [Withdrawn without replacement]
- ISO 1024:1989 Metallic materials — Hardness test — Rockwell superficial test (scales 15N, 30N, 45N, 15T, 30T and 45T) [Withdrawn: replaced with ISO 6508-1]
- ISO 1025:1981 Textile machinery and accessories — Sectional beams for warp knitting machines — Terminology and main dimensions [Withdrawn: replaced with ISO 8116-5]
- ISO 1026:1982 Fruit and vegetable products — Determination of dry matter content by drying under reduced pressure and of water content by azeotropic distillation
- ISO 1027:1983 Radiographic image quality indicators for non-destructive testing — Principles and identification [Withdrawn: replaced with ISO 19232-(1-2)]
- ISO 1028:1973 Information processing — Flowchart symbols [Withdrawn: replaced with ISO 5807]
- ISO 1029:1974 Coniferous sawn timber — Defects — Classification
- ISO 1030:1975 Coniferous sawn timber — Defects — Measurement
- ISO 1031:1974 Coniferous sawn timber — Defects — Terms and definitions
- ISO 1032:1974 Coniferous sawn timber — Sizes — Terms and definitions [Withdrawn: replaced with ISO 24294]
- ISO 1033:1975 Aircraft — Dimensions for general purpose push-pull three-pole circuit-breakers
- ISO 1034:1973 Aircraft – Ground air-conditioning connections
- ISO 1035 Hot-rolled steel bars
- ISO 1035-1 Part 1: Dimensions of round bars
- ISO 1035-2 Part 2: Dimensions of square bars
- ISO 1035-3 Part 3: Dimensions of flat bars
- ISO 1035-4 Part 4: Tolerances
- ISO 1036:1984 Textile machinery — Dyeing and finishing machines — Definition of left and right sides
- ISO 1037:1982 Textile machinery and accessories — Beams for dyeing slivers and yarn — Terminology and main dimensions [Withdrawn: replaced with ISO 8116-7]
- ISO/R 1038:1969 Rolling bearings — Cylindrical rolling bearings — Radial internal clearance [Withdrawn: replaced with ISO 5753]
- ISO 1039:1995 Cinematography — Cores for motion-picture and magnetic film rolls — Dimensions
- ISO 1040:1983 Building construction — Modular coordination — Multimodules for horizontal coordinating dimensions [Withdrawn: replaced with ISO 21723]
- ISO 1041:1973 Essential oils — Determination of freezing point
- ISO 1042:1998 Laboratory glassware — One-mark volumetric flasks
- ISO 1043 Plastics — Symbols and abbreviated terms
- ISO 1043-1:2011 Part 1: Basic polymers and their special characteristics
- ISO 1043-2:2011 Part 2: Fillers and reinforcing materials
- ISO 1043-3:2016 Part 3: Plasticizers
- ISO 1043-4:2021 Part 4: Flame retardants
- ISO 1044:1993 Industrial trucks — Lead-acid traction batteries for electric trucks — Preferred voltages [Withdrawn without replacement]
- ISO/R 1045:1969 Straight resistance spot welding electrodes – Dimensions [Withdrawn: replaced with ISO 5184]
- ISO 1046:1973 Architectural and building drawings — Vocabulary [Withdrawn: replaced with ISO 10209-1, now ISO 10209]
- ISO 1047:1973 Architectural and building drawings — Presentation of drawings — Scales [Withdrawn without replacement]
- ISO 1048:1991 Photography — Exposed roll films — Identification [Withdrawn: replaced with ISO 732]
- ISO 1049:1975 Continuous mechanical handling equipment for loose bulk materials — Vibrating conveyors and feeders with rectangular or trapezoidal trough
- ISO 1050:1975 Continuous mechanical handling equipment for loose bulk materials — Screw conveyors
- ISO 1051:1999 Rivet shank diameters
- ISO 1052:1982 Steels for general engineering purposes [Withdrawn without replacement]
- ISO 1053:1975 Zinc — Determination of copper content — Spectrophotometric method [Withdrawn without replacement]
- ISO 1054:1975 Zinc — Determination of cadmium content — Polarographic method [Withdrawn without replacement]
- ISO 1055:1975 Zinc and zinc alloys — Determination of iron content — Spectrophotometric method [Withdrawn without replacement]
- ISO 1056:1975 Numerical control of machines — Punched tape block formats — Coding of preparatory functions G and miscellaneous functions M [Withdrawn: replaced with ISO 6983-1]
- ISO 1057:1973 Numerical control of machines — Interchangeable punched tape variable block format for positioning and straight-cut machining [Withdrawn: replaced with ISO 6983-1]
- ISO 1058:1973 Numerical control of machines — Punched tape variable block for positioning and straight-cut machining [Withdrawn: replaced with ISO 6983-1]
- ISO 1059:1973 Numerical control of machines — Punched tape fixed block format for positioning and straight-cut machining [Withdrawn: replaced with ISO 6983-1]
- ISO 1060 Plastics — Homopolymer and copolymer resins of vinyl chloride
- ISO 1060-1:1998 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 24024-1]
- ISO 1060-2:1998 Part 2: Preparation of test samples and determination of properties [Withdrawn: replaced with ISO 24024-2]
- ISO 1061:1990 Plastics — Unplasticized cellulose acetate — Determination of free acidity
- ISO/R 1062:1969 Pesticides — Common names — Fourteenth series of terms [Withdrawn: replaced with ISO 1750]
- ISO 1063:1974 Surface active agents — Determination of stability in hard water
- ISO 1064:1974 Surface active agents — Determination of apparent density of pastes on filling
- ISO 1065:1991 Non-ionic surface-active agents obtained from ethylene oxide and mixed non-ionic surface-active agents — Determination of cloud point
- ISO 1066:1975 Analysis of soaps — Determination of glycerol content — Titrimetric method
- ISO 1067:1974 Analysis of soaps — Determination of unsaponifiable, unsaponified and unsaponified saponifiable matter
- ISO 1068:1975 Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of compacted apparent bulk density
- ISO 1069:1973 Magnetic compasses and binnacles for sea navigation – Vocabulary
- ISO 1070:1992 Liquid flow measurement in open channels – Slope-area method
- ISO 1071:2015 Welding consumables — Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron — Classification
- ISO 1072:1975 Solid wood parquet — General characteristics
- ISO 1073 Alphanumeric character sets for optical recognition
- ISO 1073-1:1976 Part 1: Character set OCR-A – Shapes and dimensions of the printed image
- ISO 1073-2:1976 Part 2: Character set OCR-B – Shapes and dimensions of the printed image
- ISO 1074:1991 Counterbalanced fork-lift trucks — Stability tests [Withdrawn: replaced with ISO 22915-2]
- ISO/R 1075:1969 Performance requirements for heat-resisting (190 °C) electrical cables with copper conductors for aircraft [Withdrawn without replacement]
- ISO/R 1076:1969 General purpose electric cables with aluminium or aluminium alloy conductors for aircraft [Withdrawn without replacement]
- ISO/R 1077:1969 Dimensions of elastometric toroidal sealing rings for pipe-fittings in aircraft (Inch series – Class 1 tolerances) [Withdrawn without replacement]
- ISO/R 1078:1969 Dimensions of elastometric toroidal sealing rings for aircraft (Inch series – Class 1 tolerances) [Withdrawn without replacement]
- ISO 1079:1989 Metallic materials — Hardness test — Verification of Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T) [Withdrawn: replaced with ISO 6508-2]
- ISO 1080:1975 Machine tools — Morse taper shanks — Cotter slots with taper keys
- ISO 1081:2013 Belt drives – V-belts and V-ribbed belts, and corresponding grooved pulleys – Vocabulary
- ISO 1082:1990 Mining — Shackle type connector units for chain conveyors
- ISO 1083:2018 Spheroidal graphite cast irons — Classification
- ISO 1084:1975 Industrial tractors — Definition and nominal rating [Withdrawn without replacement]
- ISO 1085:2016 Assembly tools for screws and nuts — Double-ended wrenches — Size pairing
- ISO 1086:1991 Information and documentation – Title leaves of books
- ISO 1087:2019 Terminology work and terminology science — Vocabulary
- ISO 1088:2007 Hydrometry – Velocity-area methods using current-meters – Collection and processing of data for determination of uncertainties in flow measurement
- ISO 1089:1980 Electrode taper fits for spot welding equipment — Dimensions
- ISO 1090:1981 Office machines and data processing equipment — Function key symbols on typewriters [Withdrawn: replaced with ISO 9995-(1,7)]
- ISO 1091:1977 Typewriters — Layout of printing and function keys [Withdrawn: replaced with ISO 9995-(1,7)]
- ISO 1092
- ISO 1092-1:1974 Adding machines and calculating machines — Numeric section of ten-key keyboards [Withdrawn: replaced with ISO 9995-(1,7)]
- ISO 1093:1981 Adding machines and calculating machines — Keytop and printed or displayed symbols [Withdrawn: replaced with ISO 9995-(1,7)]
- ISO/R 1094:1969 Adding machines and calculating machines — Classification [Withdrawn without replacement]
- ISO 1095:1989 Shipbuilding and marine structures — Toughened safety glass panes for side scuttles [Withdrawn: replaced with ISO 21005]
- ISO 1096:2021 Plywood — Classification
- ISO 1097:1975 Plywood — Measurement of dimensions of panels [Withdrawn without replacement]
- ISO 1098:1975 Veneer plywood for general use — General requirements [Withdrawn without replacement]
- ISO 1099:2017 Metallic materials — Fatigue testing — Axial force-controlled method [Withdrawn without replacement]
- ISO 1100 Hydrometry – Measurement of liquid flow in open channels
- ISO 1100-1:1996 Part 1: Establishment and operation of a gauging station [Withdrawn: replaced with ISO 18365]
- ISO 1100-2:2010 Part 2: Determination of the stage-discharge relationship [Withdrawn: replaced with ISO 18320]
- ISO 1101:2017 Geometrical product specifications (GPS) – Geometrical tolerancing – Tolerances of form, orientation, location and run-out
- ISO 1102:2001 Commercial road vehicles — 50 mm drawbar eye — Interchangeability
- ISO 1103:2007 Road vehicles — Coupling balls for caravans and light trailers — Dimensions
- ISO 1104:1977 Surface active agents — Technical sodium alkylarylsulphonates (excluding benzene derivatives) — Methods of analysis
- ISO/R 1105:1969 Pesticides considered not to require common names — Second list [Withdrawn: replaced with ISO 765]
- ISO 1106 Recommended practice for radiographic examination of fusion welded joints
- ISO 1106-1:1984 Part 1: Fusion welded butt joints in steel plates up to 50 mm thick [Withdrawn: replaced with ISO 17636]
- ISO 1106-2:1985 Part 2: Fusion welded butt joints in steel plates thicker than 50 mm and up to and including 200 mm in thickness [Withdrawn: replaced with ISO 17636]
- ISO 1106-3:1984 Part 3: Fusion welded circumferential joints in steel pipes of up to 50 mm wall thickness [Withdrawn: replaced with ISO 17636]
- ISO 1107:2017 Fishing nets – Netting – Basic terms and definitions
- ISO 1108:1992 Spices and condiments — Determination of non-volatile ether extract
- ISO 1109:1975 Refractory products — Classification of dense shaped refractory products [Withdrawn: replaced with ISO 10081-1]
- ISO 1110:2019 Plastics — Polyamides — Accelerated conditioning of test specimens
- ISO 1111 Single cold-reduced tinplate and single cold-reduced blackplate
- ISO 1111-1:1983 Part 1: Electrolytic and hot-dipped tinplate sheet and blackplate sheet [Withdrawn: replaced with ISO 11949]
- ISO 1111-2:1983 Part 2: Electrolytic tinplate coil and blackplate coil for subsequent cutting into sheet form [Withdrawn: replaced with ISO 11949]
- ISO 1112:2009 Horology – Functional and non-functional jewels
- ISO 1113:1979 Information processing – Representation of the 7- bit coded character set on punched tape
- ISO 1114:1977 Cocoa beans — Cut test [Withdrawn: replaced with ISO 2451]
- ISO/R 1115:1969 Finishes with the external screw thread for glass containers and gauges for inspection of screw closures [Withdrawn without replacement]
- ISO 1116:1999 Micrographics — 16 mm and 35 mm microfilm spools and reels — Specifications [Withdrawn without replacement]
- ISO 1117:1975 Bonded abrasive products — Grinding-wheel dimensions (Part 2) [Withdrawn: replaced with ISO 603-(1-16)]
- ISO 1118:1978 Aluminium and aluminium alloys — Determination of titanium — Spectrophotometric chromotropic acid method
- ISO 1119:2011 Geometrical product specifications (GPS) – Series of conical tapers and taper angles
- ISO 1120:2012 Conveyor belts — Determination of strength of mechanical fastenings — Static test method
- ISO 1121:1976 Conveyor belts — List of characteristics which may be required according to use [Withdrawn without replacement]
- ISO 1122 Vocabulary of gear terms
- ISO 1122-1:1998 Part 1: Definitions related to geometry
- ISO 1122-2:1999 Part 2: Definitions related to worm gear geometry
- ISO 1123:1976 Tapered roller bearings — Inch series — Chamfer dimension limits [Withdrawn without replacement]
- ISO 1124:1988 Rubber compounding ingredients — Carbon black shipment sampling procedures
- ISO 1125:2015 Rubber compounding ingredients — Carbon black — Determination of ash
- ISO 1126:2015 Rubber compounding ingredients — Carbon black — Determination of loss on heating
- ISO 1127:1992 Stainless steel tubes — Dimensions, tolerances and conventional masses per unit length
- ISO/R 1128:1969 Steel tubes — Butt-welding bends 5D (90° and 180°) [Withdrawn: replaced with ISO 3419]
- ISO 1129:1980 Steel tubes for boilers, superheaters and heat exchangers — Dimensions, tolerances and conventional masses per unit length [Withdrawn without replacement]
- ISO 1130:1975 Textile fibres — Some methods of sampling for testing
- ISO 1131:1976 Textile machinery and accessories — Weft pirns for box-loaders for automatic looms — Dimensions of pirn tip [Withdrawn without replacement]
- ISO 1132 Rolling bearings – Tolerances
- ISO 1132-1:2000 Part 1: Terms and definitions
- ISO 1132-2:2001 Part 2: Measuring and gauging principles and methods
- ISO 1133 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics
- ISO 1133-1:2011 Part 1: Standard method
- ISO 1133-2:2011 Part 2: Method for materials sensitive to time-temperature history and/or moisture
- ISO 1134:1993 Pears — Cold storage
- ISO 1135 Transfusion equipment for medical use
- ISO 1135-1:1987 Part 1: Glass transfusion bottles, closures and caps [Withdrawn without replacement]
- ISO 1135-3:2016 Part 3: Blood-taking sets for single use
- ISO 1135-4:2015 Part 4: Transfusion sets for single use, gravity feed
- ISO 1135-5:2015 Part 5: Transfusion sets for single use with pressure infusion apparatus
- ISO 1136:2015 Wool — Determination of mean diameter of fibres — Air permeability method
- ISO 1137:1975 Plastics — Determination of behaviour in a ventilated tubular oven [Withdrawn without replacement]
- ISO 1138:2007 Rubber compounding ingredients — Carbon black — Determination of sulfur content
- ISO 1139:1973 Textiles — Designation of yarns
- ISO 1140:2021 Fibre ropes — Polyamide — 3-, 4-, 8- and 12-strand ropes
- ISO 1141:2021 Fibre ropes — Polyester — 3-, 4-, 8- and 12-strand ropes
- ISO 1142:1973 Ropes — Sampling and conditioning for testing [Withdrawn: replaced with ISO 2307]
- ISO 1143:2021 Metallic materials — Rotating bar bending fatigue testing
- ISO 1144:2016 Textiles — Universal system for designating linear density (Tex System)
- ISO/R 1145:1969 Refractory arch bricks — Dimensions [Withdrawn: replaced with ISO 5019-2]
- ISO 1146:1988 Pyrometric reference cones for laboratory use – Specification
- ISO 1147:1995 Plastics/rubber — Polymer dispersions and synthetic rubber latices — Freeze-thaw cycle stability test
- ISO 1148:1980 Plastics — Aqueous dispersions of polymers and copolymers — Determination of pH [Withdrawn: replaced with ISO 976]
- ISO/R 1149:1969 Layout of multilingual classified vocabularies [Withdrawn: replaced with ISO 10241]
- ISO 1150:1997 Textile machinery and accessories — Drop wires for warp stop motions for weaving machines with automatic drawing-in
- ISO 1151 Flight dynamics – Concepts, quantities and symbols
- ISO 1151-1:1988 Part 1: Aircraft motion relative to the air
- ISO 1151-2:1985 Part 2: Motions of the aircraft and the atmosphere relative to the Earth
- ISO 1151-3:1989 Part 3: Derivatives of forces, moments and their coefficients
- ISO 1151-4:1994 Part 4: Concepts and quantities used in the study of aircraft stability and control
- ISO 1151-5:1987 Part 5: Quantities used in measurements
- ISO 1151-6:1982 Part 6: Aircraft geometry
- ISO 1151-7:1985 Part 7: Flight points and flight envelopes
- ISO 1151-8:1992 Part 8: Concepts and quantities used in the study of the dynamic behaviour of the aircraft
- ISO 1151-9:1993 Part 9: Models of atmospheric motions along the trajectory of the aircraft
- ISO 1152:1974 Flight dynamics – Concepts, quantities and symbols – Part 2: Motions of the aircraft and the atmosphere relative to the Earth [Renamed ISO 1151-2]
- ISO 1153:1972 Flight dynamics – Concepts, quantities and symbols – Part 3: Derivatives of forces, moments and their coefficients [Renamed ISO 1151-3]
- ISO 1154:1975 Information processing – Punched paper tape – Dimensions and location of feed holes and code holes
- ISO 1155:1978 Information processing – Use of longitudinal parity to detect errors in information messages
- ISO/R 1156:1969 Shipbuilding details – Wrought aluminium alloys for use in shipbuilding [Withdrawn without replacement]
- ISO 1157:1990 Plastics — Cellulose acetate in dilute solution — Determination of viscosity number and viscosity ratio [Withdrawn without replacement]
- ISO 1158:1998 Plastics — Vinyl chloride homopolymers and copolymers — Determination of chlorine content
- ISO 1159:1978 Plastics — Vinyl chloride-vinyl acetate copolymers — Determination of vinyl acetate [Withdrawn without replacement]
- ISO 1160:1976 Rolling bearings for railway axle-boxes — Acceptance inspection [Withdrawn without replacement]
- ISO 1161:2016 Series 1 freight containers — Corner and intermediate fittings — Specifications
- ISO 1162:1975 Cereals and pulses — Method of test for infestation by X-ray examination [Withdrawn: replaced with ISO 6639-4]
- ISO 1163 Plastics — Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials
- ISO 1163-1:1995 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 21306-1]
- ISO 1163-2:1995 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 21306-2]
- ISO/R 1164:1970 Polyethylene (PE) pipes — Tolerances on outside diameters [Withdrawn: replaced with ISO 3607, now ISO 11922-(1-2)]
- ISO/R 1165:1970 Unplasticized polyvinyl chloride (PVC) pipes — Tolerances on wall thicknesses up to 6 mm [Withdrawn: replaced with ISO 3606, now ISO 11922-(1-2)]
- ISO/R 1166:1970 Polyethylene (PE) pipes — Tolerances on wall thicknesses up to 6 mm [Withdrawn: replaced with ISO 3607, now ISO 11922-(1-2)]
- ISO 1167 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure
- ISO 1167-1:2006 Part 1: General method
- ISO 1167-2:2006 Part 2: Preparation of pipe test pieces
- ISO 1168:1973 Combine harvesters — Width of cut and number of knife sections [Withdrawn without replacement]
- ISO 1169:2006 Zinc alloys — Determination of aluminium content — Titrimetric method
- ISO 1170:2020 Coal and coke — Calculation of analyses to different bases
- ISO 1171:2010 Solid mineral fuels — Determination of ash
- ISO 1172:1996 Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods
- ISO 1173:2001 Assembly tools for screws and nuts — Drive ends for hand- and machine-operated screwdriver bits and connecting parts — Dimensions, torque testing
- ISO 1174 Assembly tools for screws and nuts — Driving squares
- ISO 1174-1:2011 Part 1: Driving squares for hand socket tools
- ISO 1174-2:1996 Part 2: Driving squares for power socket tools
- ISO 1175:1976 Shipbuilding — Dimensions and sectional properties of aluminium alloy sections for marine use [Withdrawn without replacement]
- ISO 1176:1990 Road vehicles – Masses – Vocabulary and codes
- ISO 1177:1985 Information processing – Character structure for start/stop and synchronous character oriented transmission
- ISO 1178:1976 Magnesium alloys — Determination of soluble zirconium — Alizarin sulphonate photometric method
- ISO 1179 Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing
- ISO 1179-1:2013 Part 1: Threaded ports
- ISO 1179-2:2013 Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
- ISO 1179-3:2007 Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
- ISO 1179-4:2007 Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
- ISO 1180:1983 Shanks for pneumatic tools and fitting dimensions of chuck bushings
- ISO 1181:2004 Fibre ropes — Manila and sisal — 3-, 4- and 8-strand ropes
- ISO 1182:2020 Reaction to fire tests for products—Non-combustibility test
- ISO 1183 Plastics — Methods for determining the density of non-cellular plastics
- ISO 1183-1:2019 Part 1: Immersion method, liquid pycnometer method and titration method
- ISO 1183-2:2019 Part 2: Density gradient column method
- ISO 1183-3:1999 Part 3: Gas pyknometer method
- ISO 1184:1983 Plastics — Determination of tensile properties of films [Withdrawn: replaced with ISO 527-3]
- ISO 1185:2003 Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage
- ISO/R 1186:1970 Pressures in brake lines and braking efficiency [Withdrawn without replacement]
- ISO 1187:1983 Special wrought copper alloys — Chemical composition and forms of wrought products [Withdrawn without replacement]
- ISO 1188:1984 Cinematography — Recorded characteristic for magnetic sound on full-coat 16 mm motion-picture film — Specifications
- ISO 1189:1986 Cinematography — Recorded characteristic for magnetic sound records on 35 mm motion-picture film excluding striped release prints — Specifications
- ISO 1190 Copper and copper alloys — Code of designation
- ISO 1190-1:1982 Part 1: Designation of materials
- ISO 1190-2:1982 Part 2: Designation of tempers
- ISO 1191:1975 Plastics — Polyethylenes and polypropylenes in dilute solution — Determination of viscosity number and of limiting viscosity number [Withdrawn: replaced with ISO 1628-3]
- ISO 1193:1973 Butter triers [Withdrawn: replaced with ISO 707]
- ISO 1194:1973 Cheese triers [Withdrawn: replaced with ISO 707]
- ISO/R 1195:1970 Plastics — Determination of the water vapour transmission rate of plastics films and thin sheets — Dish method [Withdrawn without replacement]
- ISO 1198:1972 Sealed-beam landing lamps for aircraft — Dimensions
- ISO/R 1200:1971 Cinematography — Labelling of containers for unexposed motion-picture films and magnetic films — Minimum information specifications [Withdrawn: replaced with ISO 3042]
- ISO 1201:1972 Cinematography — 8 mm motion-picture film with picture — Location and width of magnetic striping and gaps of recording and reproducing magnetic heads for magnetic sound record [Withdrawn without replacement]
- ISO 1202:1981 Essential oils — Determination of 1,8-cineole content [Withdrawn without replacement]
- ISO 1203:1998 Photography — Roll film cameras — Back window location
- ISO 1204:1990 Reciprocating internal combustion engines — Designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine
- ISO 1205:1972 Reciprocating internal combustion engines — Designation of the cylinders [Withdrawn: replaced with ISO 1204]
- ISO 1206:2018 Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
- ISO 1207:2011 Slotted cheese head screws — Product grade A
- ISO 1208:1982 Spices and condiments — Determination of filth
- ISO 1209 Rigid cellular plastics — Determination of flexural properties
- ISO 1209-1:2007 Part 1: Basic bending test
- ISO 1209-2:2007 Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
- ISO 1210:1992 Plastics — Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source [Withdrawn: replaced with IEC 60695-11-10]
- ISO 1211:2010 Milk — Determination of fat content — Gravimetric method (Reference method)
- ISO 1212:1995 Apples — Cold storage
- ISO 1213 Solid mineral fuels – Vocabulary
- ISO 1213-1:2020 Part 1: Terms relating to coal preparation
- ISO 1213-2:2016 Part 2: Terms relating to sampling, testing and analysis
- ISO/R 1213-3 Vocabulary of terms relating to solid mineral fuels — Part 3: Terms relating to coke [Withdrawn: replaced with ISO 1213-2]
- ISO/R 1214:1971 Counterbalanced fork lift trucks — Rated capacity [Withdrawn without replacement]
- ISO 1215:2015 Virgin cork, raw reproduction cork, ramassage, gleanings, burnt cork, corkwaste, boiled cork pieces and raw corkwaste — Definitions and packaging
- ISO 1216:2017 Boiled reproduction cork — Grading, classification and packing
- ISO 1217:2009 Displacement compressors—Acceptance tests
- ISO 1218:1975 Plastics — Polyamides — Determination of "melting point" [Withdrawn: replaced with ISO 3146]
- ISO 1219 Fluid power systems and components – Graphical symbols and circuit diagrams
- ISO 1219-1:2012 Part 1: Graphical symbols for conventional use and data-processing applications
- ISO 1219-2:2012 Part 2: Circuit diagrams
- ISO 1219-3:2016 Part 3: Symbol modules and connected symbols in circuit diagrams
- ISO/R 1220:1970 Methods of test for heat-resisting (190 °C) electrical cables with copper conductors for aircraft [Withdrawn without replacement]
- ISO 1222 Photography – Tripod connections
- ISO 1223:2003 Cinematography — Picture areas for motion-picture films for television — Position and dimensions
- ISO 1224 Rolling bearings — Instrument precision bearings
- ISO 1224-1:2007 Part 1: Boundary dimensions, tolerances and characteristics of metric series bearings [Withdrawn without replacement]
- ISO 1224-2:2007 Part 2: Boundary dimensions, tolerances and characteristics of inch series bearings [Withdrawn without replacement]
- ISO/R 1225 was merged into ISO/R 1224.
- ISO/R 1226:1970 Symbolic designation of direction of closing and faces of doors, windows and shutters [Withdrawn without replacement]
- ISO 1227:1979 Starch, including derivatives and by-products — Vocabulary [Withdrawn without replacement]
- ISO 1228:1975 Plastics — Poly(ethylene terephthalate) in dilute solution — Determination of viscosity number [Withdrawn: replaced with ISO 1628-5]
- ISO 1229:1989 Photography — Expendable photoflash lamps — Determination of light output [Withdrawn without replacement]
- ISO 1230:2007 Photography — Determination of flash guide numbers for electronic flash equipment
- ISO/R 1231:1970 Seat belt assemblies for motorists [Withdrawn without replacement]
- ISO 1232:1976 Aluminium oxide primarily used for the production of aluminium — Determination of silica content — Reduced molybdosilicate spectrophotometric method [Withdrawn without replacement]
- ISO 1233:1975 Plastics — Determination of viscosity number of methyl methacrylate polymers and copolymers in dilute solution [Withdrawn: replaced with ISO 1628-6]
- ISO 1234:1997 Split pins
- ISO 1237:1981 Mustard seed — Specification
- ISO 1241:1996 Essential oils — Determination of ester values, before and after acetylation, and evaluation of the contents of free and total alcohols
- ISO 1242:1999 Essential oils — Determination of acid value
- ISO 1247 Aluminium pigments for paints
- ISO 1247-1:2021 Part 1: General aluminium pigments
- ISO 1247-2:2021 Part 2: Vacuum metallized aluminium pigments
- ISO 1248:2006 Iron oxide pigments — Specifications and methods of test
- ISO 1249:1974 Zinc chromate pigments — Basic zinc potassium chromate pigments and zinc tetrahydroxychromate pigments
- ISO 1250:1972 Mineral solvents for paints — White spirits and related hydrocarbon solvents
- ISO/R 1260:1970 Guide to the use of ISO/R 390 "Sampling and inspection of asbestos-cement products" [Withdrawn: replaced with ISO 390]
- ISO 1264:1980 Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of pH of aqueous extract
- ISO 1265:2007 Plastics — Poly(vinyl chloride) resins — Determination of number of impurities and foreign particles
- ISO 1268 Fibre-reinforced plastics – Methods of producing test plates
- ISO 1269:2006 Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of volatile matter (including water)
- ISO 1270:1975 Plastics — PVC resins — Determination of ash and sulphated ash [Withdrawn: replaced with ISO 3451-5]
- ISO 1271:1983 Essential oils — Determination of carbonyl value — Free hydroxylamine method
- ISO 1272:2000 Essential oils — Determination of content of phenols
- ISO 1275:2006 Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors
- ISO 1279:1996 Essential oils — Determination of carbonyl value — Potentiometric methods using hydroxylammonium chloride
- ISO/TR 1281 Rolling bearings — Explanatory notes on ISO 281
- ISO/TR 1281-1:2021 Part 1: Basic dynamic load rating and basic rating life
- ISO/TR 1281-2:2008 Part 2: Modified rating life calculation, based on a systems approach to fatigue stresses
- ISO/R 1283 Brown coals and lignites — Determination of ash [Draft numbered ISO 1016]
- ISO 1288:2016 Glass in building — Determination of the bending strength of glass
- ISO 1288-1:2016 Part 1: Fundamentals of testing glass
- ISO 1288-2:2016 Part 2: Coaxial double-ring test on flat specimens with large test surface areas
- ISO 1288-3:2016 Part 3: Test with specimen supported at two points (four point bending)
- ISO 1288-4:2016 Part 4: Testing of channel shaped glass
- ISO 1288-5:2016 Part 5: Coaxial double ring test on flat specimens with small test surface areas
- ISO/R 1291 Pesticides — Common names — Ninth series of terms [Draft numbered ISO/R 967]
- ISO/R 1292 Pesticides — Common names — Eleventh series of terms [Draft numbered ISO/R 969]
- ISO/R 1295:1970 Paper vocabulary — Fifth series of terms [Withdrawn: Replaced with ISO 4046]
- ISO 1302:2002 Geometrical Product Specifications (GPS) – Indication of surface texture in technical product documentation [Withdrawn: Replaced with ISO 21920-1]
- ISO 1304:2016 Rubber compounding ingredients — Carbon black — Determination of iodine adsorption number
- ISO 1306:1995 Rubber compounding ingredients — Carbon black (pelletized) — Determination of pour density
- ISO 1307:2006 Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
- ISO 1310:1974 Carbon black for use in the rubber industry — Sampling packaged shipments [Withdrawn: Replaced with ISO 1124]
- ISO/R 1311 Shipbuilding details — Mating dimensions for pipeline flanges for ships [Draft numbered ISO/R 964]
- ISO/R 1312 Pesticides — Common names — Twelfth series of terms [Draft numbered ISO/R 970]
- ISO/R 1313 Pesticides — Common names — Thirteenth series of terms [Draft numbered ISO/R 971]
- ISO 1324:1985 Solid wood parquet — Classification of oak strips
- ISO 1325:1973 Plastics — Determination of electrical properties of thin sheet and film [Withdrawn without replacement]
- ISO/R 1326:1970 Plastics — Determination of flammability and burning rate of plastics in the form of film [Withdrawn: Replaced with ISO 9773]
- ISO 1328 Cylindrical gears — ISO system of flank tolerance classification
- ISO 1328-1:2013 Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
- ISO 1328-2:2020 Part 2: Definitions and allowable values of double flank radial composite deviations
- ISO/R 1330:1970 Unplasticized polyvinyl chloride (PVC) pipes — Tolerances on outside diameters [Withdrawn: replaced with ISO 3606, now ISO 11922-(1-2)]
- ISO/DIS 1331, 1332, and 1333 became ISO/R 1164, 1165, and 1166, respectively, meaning these numbers are unused.
- ISO 1336:1980 Wrought coppers (having minimum copper contents of 97,5 %) — Chemical composition and forms of wrought products [Withdrawn without replacement]
- ISO 1337:1980 Wrought coppers (having minimum copper contents of 99,85 %) — Chemical composition and forms of wrought products [Withdrawn without replacement]
- ISO 1338:1977 Cast copper alloys — Composition and mechanical properties [Withdrawn without replacement]
- ISO 1340:1976 Cylindrical gears — Information to be given to the manufacturer by the purchaser in order to obtain the gear required [Withdrawn without replacement]
- ISO 1341:1976 Straight bevel gears — Information to be given to the manufacturer by the purchaser in order to obtain the gear required [Withdrawn without replacement]
- ISO 1342:2012 Essential oil of rosemary (Rosmarinus officinalis L.)
- ISO 1346:2021 Fibre ropes — Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) — 3-, 4-, 8- and 12-strand ropes
- ISO 1352:2021 Metallic materials — Torque-controlled fatigue testing
- ISO/R 1353 Metallic materials — Hardness test — Rockwell superficial test (scales 15N, 30N, 45N, 15T, 30T and 45T) [Draft numbered ISO 1024]
- ISO 1355:1989 Metallic materials — Hardness test — Calibration of standardized blocks to be used for Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T) [Withdrawn: replaced with ISO 6508-3]
- ISO/R 1359 Heat-treated steels, alloy steels and free-cutting steels – Part 4: Wrought, quenched, and tempered steels with 1 % chromium and 0.2 % molybdenum and controlled sulphur content [Renamed ISO/R 683-4]
- ISO/R 1360 Heat-treated steels, alloy steels and free-cutting steels – Part 5: Wrought quenched and tempered manganese steels [Draft renamed ISO/R 683-5]
- ISO 1361:1997 Light-gauge metal containers — Round open-top cans — Internal diameters
- ISO/R 1362 Heat-treated steels, alloy steels and free-cutting steels – Part 7: Wrought quenched and tempered chromium steels [Draft renamed ISO/R 683-7]
- ISO/R 1364 Heat-treated steels, alloy steels and free-cutting steels – Part 9: Wrought free-cutting steels [Draft renamed ISO/R 683-9]
- ISO/R 1366 Heat-treated steels, alloy steels and free-cutting steels – Part 11: Wrought case hardening steels [Draft renamed ISO/R 683-11]
- ISO/R 1376 Railway rolling stock material – Rough tyres for trailer stock Dimensions and tolerances [Draft renamed ISO/R 1005-2]
- ISO/R 1378 Railway rolling stock material – Rolled or forged wheel centres for tyred wheels for trailer stock [Draft renamed ISO/R 1005-4]
- ISO/R 1379 Railway rolling stock material – Cast wheel centres in non-alloy steel for tyred wheels for trailer stock [Draft renamed ISO/R 1005-5]
- ISO 1382:2020 Rubber – Vocabulary
- ISO 1385 Phthalate esters for industrial use — Methods of test
- ISO 1385-1:1977 Part 1: General
- ISO 1385-2:1977 Part 2: Measurement of colour after heat treatment (Diallyl phthalate excluded) [Withdrawn without replacement]
- ISO 1385-3:1977 Part 3: Determination of ash [Withdrawn without replacement]
- ISO 1385-4:1977 Part 4: Titrimetric method [Withdrawn without replacement]
- ISO 1385-5:1977 Part 5: Determination of ester content — Titrimetric method after saponification [Withdrawn without replacement]
- ISO 1386:1983 Solvent acetates for industrial use — Methods of test [Withdrawn without replacement]
- ISO 1387:1982 Methanol for industrial use — Methods of test [Withdrawn without replacement]
- ISO 1388 Ethanol for industrial use — Methods of test
- ISO 1388-1:1981 Part 1: General
- ISO 1388-2:1981 Part 2: Detection of alkalinity or determination of acidity to phenolphthalein
- ISO 1388-3:1981 Part 3: Estimation of content of carbonyl compounds present in small amounts — Photometric method
- ISO 1388-4:1981 Part 4: Estimation of content of carbonyl compounds present in moderate amounts — Titrimetric method
- ISO 1388-5:1981 Part 5: Determination of aldehydes content — Visual colorimetric method
- ISO 1388-6:1981 Part 6: Test for miscibility with water
- ISO 1388-7:1981 Part 7: Determination of methanol content (methanol contents between 0,01 and 0,20 % (V/V)) — Photometric method
- ISO 1388-8:1981 Part 8: Determination of methanol content (methanol contents between 0,10 and 1,50 % (V/V)) — Visual colorimetric method
- ISO 1388-9:1981 Part 9: Determination of esters content — Titrimetric method after saponification
- ISO 1388-10:1981 Part 10: Estimation of hydrocarbons content — Distillation method
- ISO 1388-11:1981 Part 11: Test for detection of furfural
- ISO 1388-12:1981 Part 12: Determination of permanganate time
- ISO 1389 Phthalic anhydride for industrial use — Methods of test
- ISO 1389-1:1977 Part 1: General [Withdrawn without replacement]
- ISO 1389-2:1977 Part 2: Measurement of colour of the molten material [Withdrawn without replacement]
- ISO 1389-3:1977 Part 3: Measurement of colour stability [Withdrawn without replacement]
- ISO 1389-4:1977 Part 4: Measurement of colour after treatment with sulphuric acid [Withdrawn without replacement]
- ISO 1389-5:1977 Part 5: Determination of free acidity — Potentiometric method [Withdrawn without replacement]
- ISO 1389-6:1977 Part 6: Determination of phthalic anhydride content — Titrimetric method [Withdrawn without replacement]
- ISO 1389-7:1977 Part 7: Determination of maleic anhydride content — Polarographic method [Withdrawn without replacement]
- ISO 1389-8:1977 Part 8: Determination of ash [Withdrawn without replacement]
- ISO 1389-9:1977 Part 9: Determination of impurities oxidizable in the cold by potassium permanganate — Iodometric method [Withdrawn without replacement]
- ISO 1389-10:1977 Part 10: Determination of 1,4- naphthaquinone content — Colorimetric method [Withdrawn without replacement]
- ISO 1389-11:1977 Part 11: Determination of iron content — 2,2'- Bipyridyl photometric method [Withdrawn without replacement]
- ISO 1390 Maleic anhydride for industrial use — Methods of test
- ISO 1390-1:1977 Part 1: General [Withdrawn without replacement]
- ISO 1390-2:1977 Part 2: Measurement of colour of the molten material [Withdrawn without replacement]
- ISO 1390-3:1977 Part 3: Determination of free acidity — Potentiometric method [Withdrawn without replacement]
- ISO 1390-4:1977 Part 4: Determination of maleic anhydride content — Polarographic method [Withdrawn without replacement]
- ISO 1390-5:1977 Part 5: Determination of ash [Withdrawn without replacement]
- ISO 1390-6:1977 Part 6: Determination of iron content — 2,2'- Bipyridyl photometric method [Withdrawn without replacement]
- ISO 1391 Paraformaldehyde for industrial use — Methods of test
- ISO 1391-1:1976 Part 1: General [Withdrawn without replacement]
- ISO 1391-2:1976 Part 2: Determination of ash [Withdrawn without replacement]
- ISO 1391-3:1976 Part 3: Determination of iron content — 2,2'- Bipyridyl photometric method [Withdrawn without replacement]
- ISO 1391-4:1976 Part 4: Determination of water-insoluble matter [Withdrawn without replacement]
- ISO 1392:1977 Determination of crystallizing point — General method
- ISO 1393:1977 Liquid halogenated hydrocarbons for industrial use — Determination of acidity — Titrimetric method [Withdrawn without replacement]
- ISO 1394:1977 Liquid halogenated hydrocarbons for industrial use — Determination of cloud point [Withdrawn without replacement]
- ISO 1395:1977 Short pitch transmission precision bush chains and chain wheels [Withdrawn without replacement]
- ISO 1396:1975 Vulcanized and unvulcanized compounded rubber — Determination of copper content — Zinc diethyldithiocarbamate photometric method [Withdrawn: replaced with ISO 8053]
- ISO 1397:1975 Compounded rubber — Determination of manganese content — Sodium periodate photometric method [Withdrawn: replaced with ISO 7780]
- ISO/R 1398:1970 Rubber seals — Joint rings in asbestos-cement water piping [Withdrawn: replaced with ISO 4633]
- ISO 1399:1982 Rubber, vulcanized — Determination of permeability to gases — Constant volume method [Withdrawn: replaced with ISO 2782]
- ISO 1400:1975 Vulcanized rubbers of high hardness (85 to 100 IRHD) — Determination of hardness [Withdrawn: replaced with ISO 48, now ISO 48-2]
- ISO 1401:2016 Rubber hoses for agricultural spraying
- ISO 1402:2021 Rubber and plastics hoses and hose assemblies – Hydrostatic testing
- ISO 1403:2019 Rubber hoses, textile-reinforced, for general-purpose water applications — Specification
- ISO/R 1404:1970 Industrial air hose [Withdrawn: replaced with ISO 2398]
- ISO 1407:2011 Rubber — Determination of solvent extract
- ISO 1408:1995 Rubber — Determination of carbon black content — Pyrolytic and chemical degradation methods
- ISO 1409:2020 Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of surface tension
- ISO 1413:2016 Horology – Shock-resistant wrist watches
- ISO/TR 1417:1974 Automobiles — Anchorages for seat belts [Withdrawn without replacement]
- ISO 1419:2019 Rubber- or plastics-coated fabrics — Accelerated-ageing tests
- ISO 1420:2016 Rubber- or plastics-coated fabrics — Determination of resistance to penetration by water
- ISO 1421:2016 Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break
- ISO/R 1428:1971 Fire-refined high-conductivity tough pitch copper refinery shapes [Withdrawn: replaced with ISO 431]
- ISO/R 1429:1971 Fire-refined tough pitch copper refinery shapes [Withdrawn: replaced with ISO 431]
- ISO/R 1430:1971 Phosphorus-deoxidized copper — Refinery shapes [Withdrawn: replaced with ISO 431]
- ISO 1431 Rubber, vulcanized or thermoplastic — Resistance to ozone cracking
- ISO 1431-1:2012 Part 1: Static and dynamic strain testing
- ISO 1431-2:1994 Part 2: Dynamic strain test [Withdrawn: replaced with ISO 1431-1]
- ISO 1431-3:2017 Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers
- ISO 1432:2021 Rubber, vulcanized or thermoplastic — Determination of low-temperature stiffening (Gehman test)
- ISO 1433:1995 Rubber, vulcanized — Preferred gradations of properties [Withdrawn without replacement]
- ISO 1434:2016 Natural rubber in bales — Amount of bale coating — Determination
- ISO 1435:1996 Rubber compounding ingredients — Carbon black (pelletized) — Determination of fines content
- ISO 1436:2020 Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification
- ISO 1437:2017 Rubber compounding ingredients — Carbon black — Determination of sieve residue
- ISO 1438:2017 Hydrometry – Open channel flow measurement using thin-plate weirs
- ISO/R 1439 Refractory arch bricks — Dimensions [Draft numbered ISO/R 1145]
- ISO 1440 Pyrometric reference cones for laboratory use – Specification [Draft numbered ISO/R 1146]
- ISO 1442:1997 Meat and meat products — Determination of moisture content (Reference method)
- ISO 1443:1973 Meat and meat products — Determination of total fat content
- ISO 1444:1996 Meat and meat products — Determination of free fat content
- ISO 1446:2001 Green coffee — Determination of water content — Basic reference method
- ISO 1447:1978 Green coffee — Determination of moisture content (Routine method) [Withdrawn without replacement]
- ISO 1452 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U)
- ISO 1452-1:2009 Part 1: General
- ISO 1452-2:2009 Part 2: Pipes
- ISO 1452-3:2009 Part 3: Fittings
- ISO 1452-4:2009 Part 4: Valves
- ISO 1452-5:2009 Part 5: Fitness for purpose of the system
- ISO/R 1453 Adding machines and calculating machines — Numeric section of ten-key keyboards [Draft numbered ISO/R 1092]
- ISO/R 1454 Adding machines and calculating machines — Keytop and printed or displayed symbols [Draft numbered ISO/R 1093]
- ISO/R 1455:1969 Adding machines and calculating machines — Classification [Draft numbered ISO/R 1094]
- ISO 1456:2009 Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium
- ISO 1457:1974 Metallic coatings — Electroplated coatings of copper plus nickel plus chromium on iron or steel [Withdrawn: replaced with ISO 1456]
- ISO 1458:2002 Metallic coatings — Electrodeposited coatings of nickel [Withdrawn: replaced with ISO 1456]
- ISO 1459:1973 Metallic coatings — Protection against corrosion by hot dip galvanizing — Guiding principles [Withdrawn: replaced with ISO 1461]
- ISO 1460:2020 Metallic coatings — Hot dip galvanized coatings on ferrous materials — Gravimetric determination of the mass per unit area
- ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
- ISO 1462:1973 Metallic coatings — Coatings other than those anodic to the basis metal — Accelerated corrosion tests — Method for the evaluation of the results [Withdrawn: replaced with ISO 10289]
- ISO 1463:2021 Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
- ISO 1464:2018 Aerospace — Tripod jacks — Clearance dimensions
- ISO 1465:1989 Aircraft — Liquid oxygen replenishment couplings — Mating dimensions
- ISO 1466:1973 Lever-operated manual switches for aircraft — Performance requirements
- ISO 1467:1973 General purpose push-pull single-pole circuit-breakers for aircraft — Performance requirements
- ISO/R 1468:1970 Methods of test for general purpose electrical cables with aluminium or aluminium alloy conductors for aircraft [Withdrawn without replacement]
- ISO/R 1469:1969 Finishes with the external screw thread for glass containers and gauges for inspection of screw closures [Draft numbered ISO 1115]
- ISO 1472:1977 Textile machinery and accessories — Cylindrical tubes for draw-twisters — Dimensions and permissible run-out [Withdrawn without replacement]
- ISO 1478:1999 Tapping screws thread
- ISO 1479:2011 Hexagon head tapping screws
- ISO/R 1480:1970 Hexagon head tapping screws — Inch series [Withdrawn without replacement]
- ISO 1481:2011 Slotted pan head tapping screws
- ISO 1482:2011 Slotted countersunk (flat) head tapping screws
- ISO 1483:2011 Slotted raised countersunk (oval) head tapping screws
- ISO/R 1488 Dimensions of elastometric toroidal sealing rings for pipe-fittings in aircraft (Inch series – Class 1 tolerances) [Draft numbered ISO/R 1077]
- ISO/R 1489 Dimensions of elastometric toroidal sealing rings for aircraft (Inch series – Class 1 tolerances) [Draft numbered ISO/R 1078]
- ISO/R 1490:1970 Performance requirements for heat-resisting (260 °C) electrical cables with copper conductors for aircraft [Withdrawn without replacement]
- ISO/R 1491:1970 Methods of test for heat-resisting (260 °C) electrical cables with copper conductors for aircraft [Withdrawn without replacement]
- ISO/R 1494 Steel tubes — Butt-welding bends 5D (90° and 180°) [Draft numbered ISO/R 1128]
- ISO 1496 Series 1 freight containers — Specification and testing
- ISO 1496-1:2013 Part 1: General cargo containers for general purposes
- ISO 1496-2:2018 Part 2: Thermal containers
- ISO 1496-3:2019 Part 3: Tank containers for liquids, gases and pressurized dry bulk
- ISO 1496-4:1991 Part 4: Non-pressurized containers for dry bulk
- ISO 1496-5:2018 Part 5: Platform and platform-based containers
ISO 1500 – ISO 1999[edit]
- ISO 1501:2009 ISO miniature screw threads
- ISO 1502:1996 ISO general-purpose metric screw threads – Gauges and gauging
- ISO 1503:2008 Spatial orientation and direction of movement — Ergonomic requirements
- ISO 1505:1993 Textile machinery — Widths relating to dyeing and finishing machines — Definitions and range of nominal widths
- ISO 1506:1982 Textile machinery – Dyeing, finishing and allied machinery – Classification and nomenclature [Withdrawn without replacement]
- ISO/R 1508 Pesticides — Common names — Fourteenth series of terms [Draft numbered ISO/R 1062]
- ISO 1509:1973 General purpose push-pull three-pole circuit-breakers for aircraft — Performance requirements
- ISO/R 1511:1970 Protective helmets for road users [Withdrawn without replacement]
- ISO 1512:1991 Paints and varnishes — Sampling of products in liquid or paste form [Withdrawn: replaced with ISO 15528]
- ISO 1513:2010 Paints and varnishes — Examination and preparation of test samples
- ISO 1514:2016 Paints and varnishes — Standard panels for testing
- ISO 1515:1973 Paints and varnishes — Determination of volatile and non-volatile matter [Withdrawn: replaced with ISO 3251]
- ISO 1516:2002 Determination of flash/no flash — Closed cup equilibrium method
- ISO 1517:1973 Paints and varnishes — Surface-drying test — Ballotini method [Withdrawn: replaced with ISO 9117-3]
- ISO 1518 Paints and varnishes — Determination of scratch resistance
- ISO 1518-1:2019 Part 1: Constant-loading method
- ISO 1518-2:2019 Part 2: Variable-loading method
- ISO 1519:2011 Paints and varnishes — Bend test (cylindrical mandrel)
- ISO 1520:2006 Paints and varnishes — Cupping test
- ISO 1521:1973 Paints and varnishes — Determination of resistance to water — Water immersion method [Withdrawn: replaced with ISO 2812-2]
- ISO 1522:2006 Paints and varnishes — Pendulum damping test
- ISO 1523:2002 Determination of flash point — Closed cup equilibrium method
- ISO 1524:2020 Paints, varnishes and printing inks — Determination of fineness of grind
- ISO 1530:2003 Fishing nets — Description and designation of knotted netting
- ISO 1531:1973 Fishing nets – Hanging of netting – Basic terms and definitions
- ISO 1532:1973 Fishing nets – Cutting knotted netting to shape ("tapering")
- ISO/R 1534:1970 Protective helmets for motor motorists' set belts with retractors [Withdrawn without replacement]
- ISO 1535:1975 Continuous mechanical handling equipment for loose bulk materials — Troughed belt conveyors (other than portable conveyors) — Belts
- ISO 1536:1975 Continuous mechanical handling equipment for loose bulk materials — Troughed belt conveyors (other than portable conveyors) — Belt pulleys
- ISO 1537:1975 Continuous mechanical handling equipment for loose bulk materials — Troughed belt conveyors (other than portable conveyors) — Idlers
- ISO 1538:1984 Programming languages – ALGOL 60
- ISO/IEC 1539 Information technology – Programming languages – Fortran
- ISO/IEC 1539-1:2018 Part 1: Base language
- ISO/IEC 1539-2:2000 Part 2: Varying length character strings
- ISO/IEC 1539-3:1999 Part 3: Conditional compilation [Withdrawn without replacement]
- ISO 1540:2006 Aerospace — Characteristics of aircraft electrical systems
- ISO/R 1542:1971 Nomenclature of terms used in the benzole industry- Part I [Withdrawn: replaced with ISO 1543, now withdrawn without replacement]
- ISO 1543:1981 Benzole industry — Vocabulary [Withdrawn without replacement]
- ISO 1546:1981 Procedure for milk recording for cows [Withdrawn without replacement]
- ISO 1547:1975 Aircraft — Precision fuse-links — General requirements
- ISO 1548:1976 Aircraft — Precision fuse-links — Type A
- ISO 1549:1976 Aircraft — Precision fuse-links — Type B
- ISO 1550:1973 Potassium hydroxide for industrial use — Determination of sodium content — Flame emission spectrophotometric method
- ISO/R 1551:1970 Potassium hydroxide for industrial use — Determination of sodium content — Gravimetric method using uranyl acetate and magnesium acetate [Withdrawn without replacement]
- ISO 1552:1976 Liquid chlorine for industrial use — Method of sampling (for determining only the volumetric chlorine content)
- ISO 1553:1976 Unalloyed copper containing not less than 99,90 % of copper — Determination of copper content — Electrolytic method [Withdrawn without replacement]
- ISO 1554:1976 Wrought and cast copper alloys — Determination of copper content — Electrolytic method
- ISO/R 1555:1971 Copper and copper alloy rolled flat products (thickness less than 2,5 mm (0.1 in)) — Tensile test [Withdrawn: replaced with ISO 6892-1]
- ISO/R 1556:1971 Copper and copper alloy tubes of circular section — Flattening Test [Withdrawn: replaced with ISO 8492]
- ISO 1559:1995 Dental materials — Alloys for dental amalgam [Withdrawn: replaced with ISO 24234]
- ISO 1560:1985 Dental mercury [Withdrawn: replaced with ISO 24234]
- ISO 1561:1995 Dental casting wax [Withdrawn: replaced with ISO 15854]
- ISO 1562:2004 Dentistry — Casting gold alloys [Withdrawn: replaced with ISO 22674]
- ISO 1563:1990 Dental alginate impression material [Withdrawn: replaced with ISO 21563]
- ISO 1564:1995 Dental aqueous impression materials based on agar [Withdrawn: replaced with ISO 21563]
- ISO 1565:1978 Dental silicate cement (hand mixed) [Withdrawn: replaced with ISO 9917]
- ISO 1566:1978 Dental zinc phosphate cement [Withdrawn: replaced with ISO 9917]
- ISO 1567:1999 Dentistry — Denture base polymers [Withdrawn: replaced with ISO 20795-1]
- ISO 1570:1975 Zinc and zinc alloys — Determination of tin content — Spectrophotometric method [Withdrawn without replacement]
- ISO/R 1571:1970 Shanks for pneumatic tools and fitting dimensions of chuck bushings — Part II
- ISO 1572:1980 Tea — Preparation of ground sample of known dry matter content
- ISO 1573:1980 Tea — Determination of loss in mass at 103 degrees C
- ISO 1574:1980 Tea — Determination of water extract [Withdrawn: replaced with ISO 9768]
- ISO 1575:1987 Tea — Determination of total ash
- ISO 1576:1988 Tea — Determination of water-soluble ash and water-insoluble ash
- ISO 1577:1987 Tea — Determination of acid-insoluble ash
- ISO 1578:1975 Tea — Determination of alkalinity of water-soluble ash
- ISO 1580:2011 Slotted pan head screws — Product grade A
- ISO 1585:2020 Road vehicles — Engine test code — Net power
- ISO 1586:1977 Textile machinery and accessories – Shuttles – Terms and designation in relation to the position of the shuttle eye
- ISO 1587:1975 Gypsum rock for the manufacture of binders — Specifications [Withdrawn without replacement]
- ISO/R 1588:1971 Binders based on calcium sulphate — Definitions, classification, and nomenclature [Withdrawn without replacement]
- ISO/R 1589 Rivet shank diameters [Draft numbered ISO 1051]
- ISO 1592:1977 Urea for industrial use — Determination of nitrogen content — Titrimetric method after distillation [Withdrawn without replacement]
- ISO 1593:1977 Urea for industrial use — Determination of alkalinity — Titrimetric method [Withdrawn without replacement]
- ISO 1594:1977 Urea for industrial use — Determination of ash
- ISO/R 1595:1970 Urea for industrial use — Determination of iron content — 2,2'- Bipyridyl photometric method
- ISO 1597:1994 Plastics — Unplasticized cellulose acetate — Determination of acetic acid yield [Withdrawn without replacement]
- ISO 1598:1990 Plastics – Cellulose acetate — Determination of insoluble particles
- ISO 1599:1990 Plastics — Cellulose acetate — Determination of viscosity loss on moulding
- ISO 1600:1990 Plastics — Cellulose acetate — Determination of light absorption on moulded specimens produced using different periods of heating
- ISO 1604:1989 Belt drives — Endless wide V-belts for industrial speed-changers and groove profiles for corresponding pulleys
- ISO 1607 Positive-displacement vacuum pumps — Measurement of performance characteristics
- ISO 1607-1:1993 Part 1: Measurement of volume rate of flow (pumping speed) [Withdrawn: replaced with ISO 21360-2]
- ISO 1607-2:1989 Part 2: Measurement of ultimate pressure [Withdrawn: replaced with ISO 21360-2]
- ISO 1608 Vapour vacuum pumps — Measurement of performance characteristics
- ISO 1608-1:1993 Part 1: Measurement of volume rate of flow (pumping speed)
- ISO 1608-2:1989 Part 2: Measurement of critical backing pressure
- ISO 1609:2020 Vacuum technology — Dimensions of non-knife edge flanges
- ISO 1614:1976 Glycerines for industrial use — Samples and test methods — General [Withdrawn without replacement]
- ISO 1615:1976 Glycerines for industrial use — Determination of alkalinity or acidity — Titrimetric method [Withdrawn without replacement]
- ISO 1616:1976 Glycerines for industrial use — Determination of sulphated ash — Gravimetric method [Withdrawn without replacement]
- ISO 1617:1976 Aluminium oxide primarily used for the production of aluminium — Determination of sodium content — Flame emission spectrophotometric method [Withdrawn without replacement]
- ISO 1618:1976 Aluminium oxide primarily used for the production of aluminium — Determination of vanadium content — N-Benzoyl-N-phenylhydroxylamine photometric method [Withdrawn without replacement]
- ISO 1619:1976 Cryolite, natural and artificial — Preparation and storage of test samples
- ISO 1620:1976 Cryolite, natural and artificial — Determination of silica content — Reduced molybdosilicate spectrophotometric method
- ISO 1622 Plastics — Polystyrene (PS) moulding and extrusion materials
- ISO 1622-1:2012 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 24022-1]
- ISO 1622-2:1995 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 24022-2]
- ISO 1624:2001 Plastics — Vinyl chloride homopolymer and copolymer resins — Sieve analysis in water
- ISO 1625:1998 Plastics — Polymer dispersions — Determination of non-volatile matter (residue) at specified temperatures [Withdrawn: replaced with ISO 3251]
- ISO/R 1627:1970 Plastics — Method of test to determine the change in electrical properties of polyethylene due to the migration of plasticizers [Withdrawn without replacement]
- ISO 1628 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers
- ISO 1628-1:2021 Part 1: General principles
- ISO 1628-2:2020 Part 2: Poly(vinyl chloride) resins
- ISO 1628-3:2010 Part 3: Polyethylenes and polypropylenes
- ISO 1628-4:1999 Part 4: Polycarbonate (PC) moulding and extrusion materials
- ISO 1628-5:1998 Part 5: Thermoplastic polyester (TP) homopolymers and copolymers
- ISO 1628-6:1990 Part 6: Methyl methacrylate polymers
- ISO 1629:2013 Rubber and latices – Nomenclature
- ISO 1634 Wrought copper and copper alloy plate, sheet and strip
- ISO 1634-1:1987 Part 1: Technical conditions of delivery for plate, sheet and strip for general purposes [Withdrawn without replacement]
- ISO 1634-2:1987 Part 2: Technical conditions of delivery for plate and sheet for boilers, pressure vessels and heat-exchangers [Withdrawn without replacement]
- ISO 1634-3:1987 Part 3: Technical conditions of delivery for wrought copper alloy strip for springs [Withdrawn without replacement]
- ISO 1635:1974 Wrought copper and copper alloys — Round tubes for general purposes — Mechanical properties [Withdrawn without replacement]
- ISO 1637:1987 Wrought copper and copper alloy rod and bar — Technical conditions of delivery [Withdrawn without replacement]
- ISO 1638:1987 Wrought copper and copper alloy wire — Technical conditions of delivery [Withdrawn without replacement]
- ISO 1639:1974 Wrought copper alloys — Extruded sections — Mechanical properties [Withdrawn without replacement]
- ISO 1640:1974 Wrought copper alloys — Forgings — Mechanical properties [Withdrawn without replacement]
- ISO 1641 End mills and slot drills
- ISO 1641-1:2016 Part 1: Milling cutters with cylindrical shanks
- ISO 1641-2:2011 Part 2: Dimensions and designation of milling cutters with Morse taper shanks
- ISO 1641-3:2011 Part 3: Dimensions and designation of milling cutters with 7/24 taper shanks
- ISO 1642:1987 Plastics — Industrial laminated sheets based on thermosetting resins — Specification [Withdrawn without replacement]
- ISO/R 1646:1970 Rolling bearings — Double row self-aligning ball bearings — Radial internal clearance [Withdrawn: replaced with ISO 5753]
- ISO/R 1648:1971 Rolling bearings — Radial bearings with shields or seals — Outside diameter tolerances — Normal tolerance class and tolerance class 6 [Withdrawn: Replaced with ISO 492]
- ISO 1651:1974 Tube drawing mandrels
- ISO 1652:2011 Rubber latex — Determination of apparent viscosity by the Brookfield test method
- ISO 1653:1975 Vulcanized rubbers — Determination of compression set under constant deflection at low temperatures [Withdrawn: replaced with ISO 815, later ISO 815-(1-2)]
- ISO/R 1654:1971 Raw rubber and rubber latex — Determination of copper [Withdrawn: replaced with ISO 8053]
- ISO 1655:1975 Raw rubber and rubber latex — Determination of manganese content — Potassium periodate photometric method [Withdrawn: replaced with ISO 7780]
- ISO 1656:2019 Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content
- ISO 1657:1986 Rubber, raw and rubber latex — Determination of iron content — 1,10-Phenanthroline photometric method
- ISO 1658:2015 Natural rubber (NR) — Evaluation procedure
- ISO/R 1659 Layout of multilingual classified vocabularies [Draft numbered ISO/R 1149]
- ISO 1660:2017 Geometrical product specifications (GPS) – Geometrical tolerancing – Profile tolerancing
- ISO/R 1661:1971 Technical drawings – Tolerances of form and position – Part IV: Practical examples of indications on drawings. [Withdrawn without replacement]
- ISO/R 1662:1971 Refrigerating plants — Safety requirements [Withdrawn: replaced with ISO 5149, later ISO 5149-(1-4)]
- ISO 1663:2007 Rigid cellular plastics – Determination of water vapour transmission properties
- ISO 1666:1996 Starch — Determination of moisture content — Oven-drying method
- ISO/TR 1672:1977 Hardware representation of ALGOL basic symbols in the ISO 7- bit coded character set for information processing interchange [Withdrawn without replacement]
- ISO 1673:1991 Onions — Guide to storage
- ISO 1675:1985 Plastics — Liquid resins — Determination of density by the pyknometer method
- ISO 1677:1977 Sealed radioactive sources — General [Withdrawn: replaced with ISO 2919]
- ISO 1679:1973 Data processing — Implementation of the ISO 7- bit coded character set on punched cards [Withdrawn: replaced with ISO 6586]
- ISO 1680:2013 Acoustics – Test code for the measurement of airborne noise emitted by rotating electrical machines
- ISO 1681:1973 Information processing – Unpunched paper cards – Specification
- ISO 1682:1973 Information processing — 80 columns punched paper cards — Dimensions and location of rectangular punched holes [Withdrawn without replacement]
- ISO 1683:2015 Acoustics – Preferred reference values for acoustical and vibratory levels
- ISO 1684:1975 Wire, bar and tube drawing dies — Specifications
- ISO/R 1685:1971 Shipbuilding details — Multi-purpose chocks of cast steel [Withdrawn without replacement]
- ISO 1686:1976 Sodium and potassium silicates for industrial use — Samples and methods of test — General
- ISO 1687:1976 Sodium and potassium silicates for industrial use — Determination of density at 20 degrees C of products in solution — Method using density hydrometer and method using pyknometer [Withdrawn without replacement]
- ISO 1688:1976 Sodium and potassium silicates for industrial use — Determination of dry matter — Gravimetric method [Withdrawn without replacement]
- ISO 1689:1976 Sodium and potassium silicates for industrial use — Calculation of the ratio : silicon dioxide/sodium oxide or silicon dioxide/potassium oxide
- ISO 1690:1976 Sodium and potassium silicates for industrial use — Determination of silica content — Gravimetric method by insolubilization
- ISO 1691:1976 Sodium and potassium silicates for industrial use — Determination of carbonates content — Gas-volumetric method
- ISO 1692:1976 Sodium and potassium silicates for industrial use — Determination of total alkalinity — Titrimetric method
- ISO 1693:1976 Cryolite, natural and artificial — Determination of fluorine content — Modified Willard-Winter method
- ISO 1694:1976 Cryolite, natural and artificial — Determination of iron content — 1,10- Phenanthroline photometric method
- ISO 1695:1977 o-Chlorotoluene for industrial use — List of methods of test [Withdrawn without replacement]
- ISO 1696:1977 p-Chlorotoluene for industrial use — List of methods of test [Withdrawn without replacement]
- ISO 1697:1977 Chlorobenzene for industrial use — List of methods of test [Withdrawn without replacement]
- ISO 1698:1977 o-Dichlorobenzene for industrial use — List of methods of test [Withdrawn without replacement]
- ISO 1699:1977 P-Dichlorobenzene for industrial use — List of methods of test [Withdrawn without replacement]
- ISO 1700:1988 Cinematography — 8 mm Type S motion-picture raw stock film — Cutting and perforating dimensions
- ISO 1701 Test conditions for milling machines with table of variable height — Testing of the accuracy
- ISO 1701-0:1984 Part 0: General introduction [Withdrawn: replaced with ISO 1701-1 and ISO 1701-2]
- ISO 1701-1:2004 Part 1: Machines with horizontal spindle
- ISO 1701-2:2004 Part 2: Machines with vertical spindle
- ISO 1703:2005 Assembly tools for screws and nuts – Designation and nomenclature
- ISO 1704:2008 Ships and marine technology — Stud-link anchor chains
- ISO/R 1707:1970 Formic acid for industrial use — Determination of iron content — 2,2'- Bipyridyl photometric method [Withdrawn: replaced with ISO 731-6, now withdrawn without replacement]
- ISO 1708:1989 Acceptance conditions for general purpose parallel lathes — Testing of the accuracy
- ISO 1709:2018 Nuclear energy — Fissile materials — Principles of criticality safety in storing, handling and processing
- ISO/R 1710:1970 Fundamental principles for protection in the design and construction of installations for work on unsealed radioactive materials [Withdrawn without replacement]
- ISO 1711 Assembly tools for screws and nuts — Technical specifications
- ISO 1711-1:2019 Part 1: Hand-operated wrenches and sockets
- ISO 1711-2:2019 Part 2: Machine-operated sockets (impact)
- ISO/R 1713:1970 Restraining devices for children in motor vehicles
- ISO 1716:2018 Reaction to fire tests for products — Determination of the gross heat of combustion (calorific value)
- ISO 1717:1974 Rock drilling — Rotary drill-rods and rotary drill-bits for dry drilling — Connecting dimensions
- ISO 1718:1991 Rock drilling equipment — Drill rods with tapered connection for percussive drilling
- ISO 1719:1974 Rock drilling — Extension drill-steel equipment for percussive long-hole drilling — Rope-threaded equipments 7/8 to 1 1/4 in (22 to 32 mm) [Withdrawn: replaced with ISO 10207 and ISO 10208]
- ISO 1720:1974 Rock drilling — Extension drill-steel equipment for percussive long-hole drilling — Rope-threaded equipments 1 1/2 to 2 in (38 to 51 mm) [Withdrawn: replaced with ISO 10207 and ISO 10208]
- ISO 1721:1974 Rock drilling — Extension drill-steel equipment for percussive long-hole drilling — Reverse-buttress-threaded equipments 1 1/16 and 1 1/4 in (27 and 32 mm)
- ISO 1722:1974 Rock drilling — Extension drill-steel equipment for percussive long-hole drilling — Reverse-buttress-threaded equipments 1 1/2 to 2 1/2 in (38 to 64 mm)
- ISO 1724:2003 Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage
- ISO 1726 Road vehicles — Mechanical coupling between tractors and semi-trailers
- ISO 1726-1:2000 Part 1: Interchangeability between tractors and semi-trailers for general cargo
- ISO 1726-2:2007 Part 2: Interchangeability between low-coupling tractors and high-volume semi-trailers
- ISO 1726-3:2010 Part 3: Requirements for semi-trailer contact area to fifth wheel
- ISO/R 1727:1970 Pressures in brake lines and braking efficiency [Draft numbered ISO 1186]
- ISO 1728:2006 Road vehicles — Pneumatic braking connections between motor vehicles and towed vehicles — Interchangeability
- ISO 1729:1973 Information processing — Unpunched paper tape — Specification [Withdrawn without replacement]
- ISO 1730:1980 Dictation equipment – Basic operating requirements
- ISO/R 1731:1971 Dictation equipment – Classification
- ISO 1736:2008 Dried milk and dried milk products — Determination of fat content — Gravimetric method (Reference method)
- ISO 1737:2008 Evaporated milk and sweetened condensed milk — Determination of fat content — Gravimetric method (Reference method)
- ISO 1738:2004 Butter — Determination of salt content
- ISO 1739:2006 Butter — Determination of the refractive index of the fat (Reference method)
- ISO 1740:2004 Milkfat products and butter — Determination of fat acidity (Reference method)
- ISO 1741:1980 Dextrose — Determination of loss in mass on drying — Vacuum oven method
- ISO 1742:1980 Glucose syrups — Determination of dry matter — Vacuum oven method
- ISO 1743:1982 Glucose syrup — Determination of dry matter content — Refractive index method
- ISO 1745:1975 Information processing – Basic mode control procedures for data communication systems
- ISO 1746:1998 Rubber or plastics hoses and tubing — Bending tests [Withdrawn: replaced with ISO 10619-1]
- ISO 1747:1976 Rubber, vulcanized — Determination of adhesion to rigid plates in shear — Quadruple shear method [Withdrawn: replaced with ISO 1827]
- ISO/R 1748 Shipbuilding details – Wrought aluminium alloys for use in shipbuilding [Draft numbered ISO/R 1156]
- ISO 1749:1973 Aircraft — Elastomeric sealing rings — Packaging and identification [Withdrawn without replacement]
- ISO 1750:1981 Pesticides and other agrochemicals – Common names
- ISO 1751:2012 Ships and marine technology — Ships' side scuttles
- ISO 1753:1975 Cinematography — Recording and reproducing head gaps for six-track magnetic sound records on 35 mm motion-picture film containing no picture — Positions and width dimensions [Withdrawn: replaced with ISO 162]
- ISO 1754:2010 Photography — Cameras using 35 mm film and roll film — Dimensions of picture sizes
- ISO 1755:1987 Photography — Projector slides — Dimensions
- ISO 1756:1975 Industrial trucks — Dimensions of stillages — Connection gauge
- ISO 1757:1996 Personal photographic dosemeters [Withdrawn without replacement]
- ISO 1758:1976 Direct-reading electroscope-type pocket exposure meters [Withdrawn: replaced with ISO 11934, now withdrawn without replacement]
- ISO 1759:1976 Indirect-reading capacitor-type pocket exposure meters and accessory electrometers [Withdrawn: replaced with ISO 11934, now withdrawn without replacement]
- ISO/R 1761:1970 Acoustics — Procedure for describing aircraft noise heard on the ground using spectral analysis [Withdrawn: replaced with ISO 3891, now withdrawn without replacement]
- ISO 1762:2019 Paper, board, pulps and cellulose nanomaterials — Determination of residue (ash content) on ignition at 525 °C
- ISO 1763:2020 Textile floor coverings — Determination of number of tufts and/or loops per unit length and per unit area
- ISO 1764:1975 Textile floor coverings — Determination of mass per unit area of machine made textile floor coverings [Withdrawn: replaced with ISO 8543]
- ISO 1765:1986 Machine-made textile floor coverings — Determination of thickness
- ISO 1766:1999 Textile floor coverings — Determination of thickness of pile above the substrate
- ISO/R 1767:1971 Rubber — Determination of rebound resilience of vulcanizates [Withdrawn: replaced with ISO 4662]
- ISO 1768:1975 Glass hydrometers – Conventional value for the thermal cubic expansion coefficient (for use in the preparation of measurement tables for liquids)
- ISO 1769:1975 Laboratory glassware – Pipettes – Colour coding
- ISO 1770:1981 Solid-stem general purpose thermometers [Withdrawn without replacement]
- ISO 1771:1981 Enclosed-scale general purpose thermometers [Withdrawn without replacement]
- ISO 1772:1975 Laboratory crucibles in porcelain and silica
- ISO 1773:1997 Laboratory glassware — Narrow-necked boiling flasks
- ISO 1775:1975 Porcelain laboratory apparatus — Requirements and methods of test
- ISO 1776:1985 Glass — Resistance to attack by hydrochloric acid at 100 degrees C — Flame emission or flame atomic absorption spectrometric method
- ISO 1780:1984 Cinematography — Motion-picture camera cartridge, 8 mm Type S Model I — Aperture, camera aperture profile, film position, pressure pad and pressure pad flatness — Dimensions and specifications
- ISO 1781:1983 Cinematography — Projector usage of 8 mm Type S motion-picture film for direct front projection
- ISO 1783:1973 Magnesium alloys — Determination of zinc — Volumetric method
- ISO 1784:1976 Aluminium alloys — Determination of zinc — EDTA titrimetric method
- ISO 1785:1983 Cinematography — Printed 8 mm, Type S, image area on 16 mm motion-picture film perforated 8 mm, Type S (1-4) — Position and dimensions
- ISO/R 1786:1970 Statistics — Vocabulary and symbols — Second series [Withdrawn: replaced with ISO 3534]
- ISO 1787:1984 Cinematography — Camera usage of 8 mm Type S motion-picture film — Specifications
- ISO 1788 Specification for compostable plastics [Rejected draft]
- ISO 1789:1983 Building construction — Modular co-ordination — Storey heights and room heights for residential buildings [Withdrawn: replaced with ISO 6512, now replaced with ISO 21723]
- ISO/R 1790:1970 Building construction – Modular co-ordination – Reference lines of horizontal controlling co-ordinating dimensions [Withdrawn: replaced with ISO 2848]
- ISO 1791:1983 Building construction – Modular co-ordination – Vocabulary [Withdrawn: replaced with ISO 6707-1]
- ISO 1793:2005 Cinematography — Reels for 16 mm motion-picture projectors (up to and including 610 m capacity: 38 cm size) — Dimensions
- ISO/R 1794:1971 Cellular plastics and rubbers — Determination of linear dimensions [Withdrawn: replaced with ISO 1923]
- ISO 1795:2017 Rubber, raw natural and raw synthetic — Sampling and further preparative procedures
- ISO 1796:1982 Rubber, raw — Sample preparation [Withdrawn: replaced with ISO 1795]
- ISO 1797:2017 Dentistry — Shanks for rotary and oscillating instruments
- ISO 1798:2008 Flexible cellular polymeric materials — Determination of tensile strength and elongation at break
- ISO/R 1799:1971 Dimensions of elastomeric toroidal sealing rings for pipe-fittings in aircraft [Withdrawn without replacement]
- ISO/R 1800:1971 Dimensions of elastomeric toroidal sealing rings for aircraft [Withdrawn without replacement]
- ISO 1802:1992 Natural rubber latex concentrate — Determination of boric acid content
- ISO 1803:1997 Building construction – Tolerances – Expression of dimensional accuracy – Principles and terminology [Withdrawn: replaced with ISO 6707-1]
- ISO 1804:1972 Doors – Terminology [Withdrawn: replaced with ISO 22496]
- ISO 1805:2006 Fishing nets — Determination of breaking force and knot breaking force of netting yarns
- ISO 1806:2002 Fishing nets — Determination of mesh breaking force of netting
- ISO 1807:1975 Continuous mechanical handling equipment for loose bulk materials — Oscillating conveyors and shaking or reciprocating feeders with rectangular or trapezoidal trough
- ISO 1809:1977 Textile machinery and accessories – Types of formers for yarn packages – Nomenclature
- ISO 1810:1976 Copper alloys — Determination of nickel (low contents) — Dimethylglyoxime spectrophotometric method [Withdrawn without replacement]
- ISO 1811 Copper and copper alloys — Selection and preparation of samples for chemical analysis
- ISO 1811-1:1988 Part 1: Sampling of cast unwrought products
- ISO 1811-2:1988 Part 2: Sampling of wrought products and castings
- ISO 1812:1976 Copper alloys — Determination of iron content — 1,10- Phenanthroline spectrophotometric method
- ISO 1813:2014 Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Characteristics and methods of test
- ISO 1815:1975 Continuous mechanical handling equipment for loose bulk materials — Vibrating feeders and conveyors with tubular trough
- ISO 1816:1975 Continuous mechanical handling equipment for loose bulk materials and unit loads — Belt conveyors — Basic characteristics of motorized driving pulleys
- ISO 1817:2015 Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
- ISO 1818:1975 Vulcanized rubbers of low hardness (10 to 35 IRHD) — Determination of hardness [Withdrawn: replaced with ISO 48, now ISO 48-2]
- ISO 1819:1977 Continuous mechanical handling equipment — Safety code — General rules
- ISO 1820:1975 Continuous mechanical handling equipment for loose bulk materials — Storage equipment : Storage bins and bunkers, silos and hoppers, bin gates — Safety code [Withdrawn: replaced with ISO 8456]
- ISO 1821:1975 Continuous mechanical handling equipment for loose bulk materials — Belt feeders and conveyors — Safety code [Withdrawn: replaced with ISO 8456]
- ISO 1822:1973 Wool — Determination of fibre length using a single-fibre length-measuring machine [Withdrawn: replaced with ISO 6989]
- ISO 1823:2015 Rubber hose and hose assemblies for oil suction and discharge service — Specification
- ISO 1825:2017 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling — Specification
- ISO 1826:1981 Rubber, vulcanized — Time-interval between vulcanization and testing — Specification [Withdrawn: replaced with ISO 471, and later ISO 23529]
- ISO 1827:2016 Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods
- ISO 1828:2012 Health informatics – Categorial structure for terminological systems of surgical procedures
- ISO 1829:1975 Selection of tolerance zones for general purposes [Withdrawn: replaced with ISO 286-1]
- ISO 1830:2005 Paper, board and pulps — Determination of acid-soluble manganese [Withdrawn: replaced with ISO 12830]
- ISO 1831:1980 Printing specifications for optical character recognition
- ISO 1832:2017 Indexable inserts for cutting tools — Designation
- ISO 1833 Textiles — Quantitative chemical analysis
- ISO 1833-1:2020 Part 1: General principles of testing
- ISO 1833-2:2020 Part 2: Ternary fibre mixtures
- ISO 1833-3:2019 Part 3: Mixtures of acetate with certain other fibres (method using acetone)
- ISO 1833-4:2017 Part 4: Mixtures of certain protein fibres with certain other fibres (method using hypochlorite)
- ISO 1833-5:2006 Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate)
- ISO 1833-6:2018 Part 6: Mixtures of viscose, certain types of cupro, modal or lyocell with certain other fibres (method using formic acid and zinc chloride)
- ISO 1833-7:2017 Part 7: Mixtures of polyamide with certain other fibres (method using formic acid)
- ISO 1833-8:2006 Part 8: Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate)
- ISO 1833-9:2019 Part 9: Mixtures of acetate with certain other fibres (method using benzyl alcohol)
- ISO 1833-10:2019 Part 10: Mixtures of triacetate or polylactide with certain other fibres (method using dichloromethane)
- ISO 1833-11:2017 Part 11: Mixtures of certain cellulose fibres with certain other fibres (method using sulfuric acid)
- ISO 1833-12:2020 Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres with certain other fibres (method using dimethylformamide)
- ISO 1833-13:2019 Part 13: Mixtures of certain chlorofibres with certain other fibres (method using carbon disulfide/acetone)
- ISO 1833-14:2019 Part 14: Mixtures of acetate with certain other fibres (method using glacial acetic acid)
- ISO 1833-15:2019 Part 15: Mixtures of jute with certain animal fibres (method by determining nitrogen content)
- ISO 1833-16:2019 Part 16: Mixtures of polypropylene fibres with certain other fibres (method using xylene)
- ISO 1833-17:2019 Part 17: Mixtures of cellulose fibres and certain fibres with chlorofibres and certain other fibres (method using concentrated sulfuric acid)
- ISO 1833-18:2019 Part 18: Mixtures of silk with other protein fibres (method using sulfuric acid)
- ISO 1833-19:2006 Part 19: Mixtures of cellulose fibres and asbestos (method by heating)
- ISO 1833-20:2018 Part 20: Mixtures of elastane with certain other fibres (method using dimethylacetamide)
- ISO 1833-21:2019 Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates with certain other fibres (method using cyclohexanone)
- ISO 1833-22:2020 Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell with flax fibres (method using formic acid and zinc chloride)
- ISO 1833-24:2010 Part 24: Mixtures of polyester and certain other fibres (method using phenol and tetrachloroethane)
- ISO 1833-25:2020 Part 25: Mixtures of polyester with certain other fibres (method using trichloroacetic acid and chloroform)
- ISO 1833-26:2020 Part 26: Mixtures of melamine with certain other fibres (method using hot formic acid)
- ISO 1833-27:2018 Part 27: Mixtures of cellulose fibres with certain other fibres (method using aluminium sulfate)
- ISO 1833-28:2019 Part 28: Mixtures of chitosan with certain other fibres (method using diluted acetic acid)
- ISO 1833-29:2020 Part 29: Mixtures of polyamide with polypropylene/polyamide bicomponent (method using sulfuric acid)
- ISO 1834:1999 Short link chain for lifting purposes — General conditions of acceptance
- ISO 1835:2018 Round steel short link chains for lifting purposes — Medium tolerance sling chains — Grade 4, stainless steel
- ISO 1836:1980 Short link chain for lifting purposes — Grade M (4), calibrated, for chain hoists and other lifting appliances [Withdrawn without replacement]
- ISO 1837:2003 Lifting hooks – Nomenclature
- ISO 1838:1993 Fresh pineapples — Storage and transport
- ISO 1839:1980 Tea — Sampling
- ISO 1840:1976 Definitions of living animals for slaughter — Porcines [Withdrawn without replacement]
- ISO 1841 Meat and meat products — Determination of chloride content
- ISO 1841-1:1996 Part 1: Volhard method
- ISO 1841-2:1996 Part 2: Potentiometric method
- ISO 1842:1991 Fruit and vegetable products — Determination of pH
- ISO 1843 Higher alcohols for industrial use — Methods of test (ISO/R 1843:1970 was Higher alcohols for industrial use — measurement of colour in Hazen units)
- ISO 1843-1:1977 Part 1: General [Withdrawn without replacement]
- ISO 1843-2:1977 Part 2: Determination of acidity to phenolphthalein — Titrimetric method [Withdrawn without replacement]
- ISO 1843-3:1977 Part 3: Determination of carbonyl compounds content — Potentiometric method [Withdrawn without replacement]
- ISO 1843-4:1977 Part 4: Determination of bromine number — Titrimetric method in the presence of mercury(II) chloride [Withdrawn without replacement]
- ISO 1843-5:1977 Part 5: Determination of total alcohols content — Titrimetric method [Withdrawn without replacement]
- ISO 1843-6:1977 Part 6: Determination of ash [Withdrawn without replacement]
- ISO 1843-7:1982 Part 7: Determination of distillation yield [Withdrawn without replacement]
- ISO 1843-8:1982 Part 8: Sulphuric acid colour test [Withdrawn without replacement]
- ISO/R 1844:1970 Higher alcohols for industrial use — Determination of density at 20 degrees C [Withdrawn: replaced with ISO 1843-1, now withdrawn without replacement]
- ISO/R 1845:1970 Higher alcohols for industrial use — Determination of distillation yield [Withdrawn: replaced with ISO 1843-7, now withdrawn without replacement]
- ISO/R 1846:1970 Higher alcohols for industrial use — Determination of acidity to phenolphthalein — Titrimetric method [Withdrawn: replaced with ISO 1843-2, now withdrawn without replacement]
- ISO/R 1847:1970 Higher alcohols for industrial use — Determination of carbonyl compounds content — Potentiometric method [Withdrawn: replaced with ISO 1843-3, now withdrawn without replacement]
- ISO/R 1848:1970 Higher alcohols for industrial use — Determination of bromine number — Titrimetric method in the presence of mercury(II) chloride [Withdrawn: replaced with ISO 1843-4, now withdrawn without replacement]
- ISO/R 1849:1970 Higher alcohols for industrial use — Determination of water content by the Karl Fischer method [Withdrawn: replaced with ISO 1843-1, now withdrawn without replacement]
- ISO/R 1850:1970 Higher alcohols for industrial use — Determination of total alcohols content — Titrimetric method [Withdrawn: replaced with ISO 1843-5, now withdrawn without replacement]
- ISO/R 1851:1970 Higher alcohols for industrial use — Determination of ash [Withdrawn: replaced with ISO 1843-6, now withdrawn without replacement]
- ISO/R 1852:1970 Higher alcohols for industrial use — Sulphuric acid colour test [Withdrawn: replaced with ISO 1843-8, now withdrawn without replacement]
- ISO 1853:2018 Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity
- ISO 1854:2008 Whey cheese — Determination of fat content — Gravimetric method (Reference method)
- ISO/R 1855:1975 Cellular rubbers – Determination of apparent density [Withdrawn: replaced with ISO 845]
- ISO 1856:2018 Flexible cellular polymeric materials — Determination of compression set
- ISO 1858:1977 Information processing – General purpose hubs and reels, with 76 mm (3 in) centrehole, for magnetic tape used in interchange instrumentation applications
- ISO 1859:1973 Information processing – Unrecorded magnetic tapes for interchange instrumentation applications – General dimensional requirements
- ISO 1860:1986 Information processing – Precision reels for magnetic tape used in interchange instrumentation applications
- ISO 1861:1975 Information processing – 7- track, 12,7 mm (0.5 in) wide magnetic tape for information interchange recorded at 8 rpmm (200 rpi) [Withdrawn without replacement]
- ISO 1862:1975 Information processing – 9- track, 12,7 mm (0.5 in) wide magnetic tape for information interchange recorded at 8 rpmm (200 rpi) [Withdrawn without replacement]
- ISO/IEC 1863:1990 Information processing – 9-track, 12,7 mm (0,5 in) wide magnetic tape for information interchange using NRZ1 at 32 ftpmm (800 ftpi) – 32 cpmm (800 cpi)
- ISO/IEC 1864:1992 Information technology – Unrecorded 12,7 mm (0,5 in) wide magnetic tape for information interchange – 32 ftpmm (800 ftpi), NRZ1, 126 ftpmm (3 200 ftpi) phase encoded and 356 ftpmm (9 042 ftpi), NRZ1
- ISO 1865:1977 Textile machinery and accessories — Serrated bars for mechanical warp stop motions — Designations of dimensions, and dimensions of cross-section
- ISO 1866:1975 Pelletized carbon black for use in the rubber industry delivered in bulk or in bins — Specification for maximum fines content [Withdrawn without replacement]
- ISO 1867:1975 Carbon black for use in the rubber industry — Specification for sieve residue [Withdrawn without replacement]
- ISO 1868:1982 Rubber compounding ingredients — Carbon black — Specification limits for loss on heating [Withdrawn without replacement]
- ISO 1869:1977 Methylene chloride for industrial use — List of methods of test [Withdrawn without replacement]
- ISO 1870:1977 Chloroform for industrial use — List of methods of test [Withdrawn without replacement]
- ISO 1871:1979 Food and feed products — General guidelines for the determination of nitrogen by the Kjeldahl method
- ISO 1872 Plastics — Polyethylene (PE) moulding and extrusion materials
- ISO 1872-1:1993 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 17855-1]
- ISO 1872-2:2007 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 17855-2]
- ISO 1873 Plastics — Polypropylene (PP) moulding and extrusion materials
- ISO 1873-1:1995 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 19069-1]
- ISO 1873-2:2007 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 19069-2]
- ISO 1874 Plastics — Polyamide (PA) moulding and extrusion materials
- ISO 1874-1:2010 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 16396-1]
- ISO 1874-2:2012 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 16396-2]
- ISO 1875:1982 Plastics — Plasticized cellulose acetate — Determination of matter extractable by diethyl ether
- ISO 1876 Swing doors — Dimensioning rules [Rejected draft][4]
- ISO 1877 Single-leaf wooden swing doors — Principal dimensions [Rejected draft][4]
- ISO 1878:1983 Classification of instruments and devices for measurement and evaluation of the geometrical parameters of surface finish [Withdrawn without replacement]
- ISO 1879:1981 Instruments for the measurement of surface roughness by the profile method — Vocabulary [Withdrawn without replacement]
- ISO 1880:1979 Instruments for the measurement of surface roughness by the profile method — Contact (stylus) instruments of progressive profile transformation — Profile recording instruments [Withdrawn: replaced with ISO 3274]
- ISO 1881:1973 Coke not greater than 60 mm top size — Determination of mechanical strength
- ISO/R 1882 Vocabulary of terms relating to solid mineral fuels — Part 2: Terms relating to coal sampling and analysis [Draft named ISO/R 1223-2]
- ISO/R 1883 Vocabulary of terms relating to solid mineral fuels — Part 3: Terms relating to coke [Draft named ISO/R 1223-3]
- ISO 1886:1990 Reinforcement fibres — Sampling plans applicable to received batches [Withdrawn without replacement]
- ISO 1887:2014 Textile glass — Determination of combustible-matter content
- ISO 1888:2022 Textile glass — Staple fibres or filaments — Determination of average diameter
- ISO 1889:2009 Reinforcement yarns — Determination of linear density
- ISO 1890:2009 Reinforcement yarns — Determination of twist
- ISO 1891:2009 Fasteners – Terminology
- ISO 1891-2:2014 Part 2: Vocabulary and definitions for coatings
- ISO 1893:2007 Refractory products — Determination of refractoriness under load — Differential method with rising temperature
- ISO 1894:1979 General purpose Series 1 freight containers — Minimum internal dimensions [Withdrawn: Replaced with ISO 1496-1]
- ISO/TR 1896:1991 Products in fibre-reinforced cement — Non-combustible fibre-reinforced boards of calcium silicate or cement for insulation and fire protection [Withdrawn without replacement]
- ISO 1897:1977 Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use — Methods of test (ISO/R 1897 was Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use — Determination of water content by the Karl Fischer method)
- ISO 1897-1:1977 Part 1: General [Withdrawn without replacement]
- ISO 1897-2:1977 Part 2: Determination of water — Dean and Stark method [Withdrawn without replacement]
- ISO 1897-3:1977 Part 3: Determination of neutral oils and pyridine bases [Withdrawn without replacement]
- ISO 1897-4:1977 Part 4: Visual test for impurities insoluble in sodium hydroxide solution (Excluding cresylic acid and xylenols) [Withdrawn without replacement]
- ISO 1897-5:1977 Part 5: Visual test for impurities insoluble in water (Phenol only) [Withdrawn without replacement]
- ISO 1897-6:1977 Part 6: Test for absence of hydrogen sulphide (Cresylic acid and xylenols only) [Withdrawn without replacement]
- ISO 1897-7:1977 Part 7: Measurement of colour (Cresylic acid and xylenols only) [Withdrawn without replacement]
- ISO 1897-8:1977 Part 8: Determination of o-cresol content (Cresylic acid and xylenols only) [Withdrawn without replacement]
- ISO 1897-9:1977 Part 9: Determination of m-cresol content (Cresylic acid only) [Withdrawn without replacement]
- ISO 1897-10:1982 Part 10: Determination of dry residue after evaporation on a water bath (Excluding cresylic acid and xylenols) [Withdrawn without replacement]
- ISO 1897-11:1983 Part 11: Determination of crystallizing point (Excluding cresylic acid and xylenols) [Withdrawn without replacement]
- ISO 1897-12:1983 Part 12: Determination of distillation characteristics (Cresylic acid and xylenols only) [Withdrawn without replacement]
- ISO 1897-13:1983 Part 13: Determination of residue on distillation (Cresylic acid and xylenols only) [Withdrawn without replacement]
- ISO/R 1898:1971 Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use — Determination of water — Dean and Stark method [Withdrawn: Replaced with ISO 1897-2]
- ISO/R 1899:1971 Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use — Determination of neutral oils and pyridine bases [Withdrawn: Replaced with ISO 1897-3]
- ISO/R 1900:1971 Phenol, o-cresol, m-cresol, and p-cresol for industrial use — Determination of dry residue after evaporation on a water bath [Withdrawn: Replaced with ISO 1897-10]
- ISO/R 1901:1971 Phenol, o-cresol, m-cresol, and p-cresol for industrial use — Determination of crystallizing point [Withdrawn: Replaced with ISO 1897-11]
- ISO/R 1902:1971 Phenol, o-cresol, m-cresol, and p-cresol for industrial use — Visual test for impurities insoluble in sodium hydroxide solution [Withdrawn: Replaced with ISO 1897-4]
- ISO/R 1903:1971 Phenol, m-cresol, cresylic acid and xylenols for industrial use — Determination of density at 20 degrees C [Withdrawn: Replaced with ISO 1897-1]
- ISO 1904:1972 Liquefied phenol for industrial use — Determination of phenols content — Bromination method [Withdrawn without replacement]
- ISO/R 1905:1971 Liquefied phenol for industrial use — Visual test for impurities insoluble in water [Withdrawn: Replaced with ISO 1897-5]
- ISO/R 1906:1971 Cresylic acid and xylenols for industrial use — Determination of distillation characteristics [Withdrawn: Replaced with ISO 1897-12]
- ISO/R 1907:1971 Cresylic acid and xylenols for industrial use — Determination of residue on distillation [Withdrawn: Replaced with ISO 1897-13]
- ISO/R 1908:1971 Cresylic acid and xylenols for industrial use — Test for absence of hydrogen sulphide [Withdrawn: Replaced with ISO 1897-6]
- ISO/R 1909:1971 Cresylic acid and xylenols for industrial use — Measurement of colour [Withdrawn: Replaced with ISO 1897-7]
- ISO/R 1910:1971 Cresylic acid and xylenols for industrial use — Determination of o-cresol content [Withdrawn: Replaced with ISO 1897-8]
- ISO/R 1911:1971 Cresylic acid for industrial use — Determination of crystallizing point [Withdrawn: Replaced with ISO 1897-9]
- ISO/R 1912:1971 Paper vocabulary — Sixth series of terms (Definition of optical properties) [Withdrawn: Replaced with ISO 4046]
- ISO/R 1913:1971 Formic acid for industrial use — Determination of low contents of other volatile acids — Titrimetric method after distillation [Withdrawn: replaced with ISO 731-7, now withdrawn without replacement]
- ISO 1914:1972 Boric acid for industrial use — Determination of boric acid content — Volumetric method [Withdrawn without replacement]
- ISO 1915:1972 Boric oxide for industrial use — Determination of boric oxide content — Volumetric method [Withdrawn without replacement]
- ISO 1916:1972 Disodium tetraborates for industrial use — Determination of sodium oxide and boric oxide contents and loss on ignition [Withdrawn without replacement]
- ISO 1917:1972 Hydrated sodium perborates for industrial use — Determination of sodium oxide, boric oxide and available oxygen contents — Volumetric methods [Withdrawn without replacement]
- ISO 1918:1972 Boric acid, boric oxide, disodium tetraborates and crude sodium borates for industrial use — Determination of sulphur compounds — Volumetric method [Withdrawn without replacement]
- ISO 1919:1998 Road vehicles — M14 x 1,25 spark-plugs with flat seating and their cylinder head housings [Withdrawn without replacement]
- ISO 1920 Testing of concrete
- ISO 1920-1:2004 Part 1: Sampling of fresh concrete
- ISO 1920-2:2016 Part 2: Properties of fresh concrete
- ISO 1920-3:2019 Part 3: Making and curing test specimens
- ISO 1920-4:2020 Part 4: Strength of hardened concrete
- ISO 1920-5:2018 Part 5: Density and water penetration depth
- ISO 1920-6:2019 Part 6: Sampling, preparing and testing of concrete cores
- ISO 1920-7:2004 Part 7: Non-destructive tests on hardened concrete
- ISO 1920-8:2009 Part 8: Determination of drying shrinkage of concrete for samples prepared in the field or in the laboratory
- ISO 1920-9:2009 Part 9: Determination of creep of concrete cylinders in compression
- ISO 1920-10:2010 Part 10: Determination of static modulus of elasticity in compression
- ISO 1920-11:2013 Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion
- ISO 1920-12:2015 Part 12: Determination of the carbonation resistance of concrete — Accelerated carbonation method
- ISO 1920-13:2018 Part 13: Properties of fresh self compacting concrete
- ISO 1920-14:2019 Part 14: Setting time of concrete mixtures by resistance to penetration
- ISO 1922:2018 Rigid cellular plastics — Determination of shear properties
- ISO 1923:1981 Cellular plastics and rubbers — Determination of linear dimensions
- ISO 1924 Paper and board — Determination of tensile properties
- ISO 1924-1:1992 Part 1: Constant rate of loading method [Withdrawn without replacement]
- ISO 1924-2:2008 Part 2: Constant rate of elongation method (20 mm/min)
- ISO 1924-3:2005 Part 3: Constant rate of elongation method (100 mm/min)
- ISO 1925:2001 Mechanical vibration — Balancing — Vocabulary [Withdrawn: replaced with ISO 21940-2]
- ISO 1926:2009 Rigid cellular plastics — Determination of tensile properties
- ISO 1927 Monolithic (unshaped) refractory products
- ISO 1927-1:2012 Part 1: Introduction and classification
- ISO 1927-2:2012 Part 2: Sampling for testing
- ISO 1927-3:2012 Part 3: Characterization as received
- ISO 1927-4:2012 Part 4: Determination of consistency of castables
- ISO 1927-5:2012 Part 5: Preparation and treatment of test pieces
- ISO 1927-6:2012 Part 6: Measurement of physical properties
- ISO 1927-7:2012 Part 7: Tests on pre-formed shapes
- ISO 1927-8:2012 Part 8: Determination of complementary properties
- ISO 1928:2020 Coal and coke — Determination of gross calorific value
- ISO 1929:1993 Abrasive belts — Dimensions, tolerances and designation
- ISO 1938 Geometrical product specifications (GPS) – Dimensional measuring equipment
- ISO 1938-1:2015 Part 1: Plain limit gauges of linear size
- ISO 1938-2:2017 Part 2: Reference disk gauges
- ISO/R 1939:1970 Pneumatic cylinders – cylinder bores and port sizes [Withdrawn without replacement]
- ISO 1940 Mechanical vibration — Balance quality requirements for rotors in a constant (rigid) state
- ISO 1940-1:2003 Part 1: Specification and verification of balance tolerances [Withdrawn: replaced with ISO 21940-11]
- ISO 1940-2:1997 Part 2: Mechanical vibration — Balance quality requirements of rigid rotors — Part 2: Balance errors [Withdrawn: replaced with ISO 21940-14]
- ISO/R 1941:1970 Flat seal for hydraulic couplings [Withdrawn without replacement]
- ISO 1942:2020 Dentistry – Vocabulary
- ISO/R 1943:1970 Coupling Threads for Hydraulic or Pneumatic Piping [Withdrawn: replaced with ISO 1179-(1-4)]
- ISO/R 1944:1970 Pipe couplings for hydraulic piping (pipe threads) [Withdrawn without replacement]
- ISO 1946:1976 Textile machinery and accessories — Condenser bobbins for woollen spinning — Dimensions [Withdrawn without replacement]
- ISO 1947:1973 System of cone tolerances for conical workpieces from C = 1:3 to 1:500 and lengths from 6 to 630 mm [Withdrawn without replacement]
- ISO 1948:1987 Photography — Front lens barrels up to 127 mm — Dimensions important to the connection of auxiliaries
- ISO 1949:1987 Aircraft — Electrical connectors — Design requirements
- ISO 1950:1974 Aircraft — Identification of servicing, maintenance, ground handling and safety/hazard points [Withdrawn without replacement]
- ISO 1951:2007 Presentation/representation of entries in dictionaries – Requirements, recommendations and information
- ISO 1952:2008 Solid mineral fuels — Determination of extractable metals in dilute hydrochloric acid
- ISO 1953:2015 Hard coal — Size analysis by sieving
- ISO 1954:2013 Plywood — Tolerances on dimensions
- ISO 1955:1982 Citrus fruits and derived products — Determination of essential oils content (Reference method)
- ISO 1956 Fruits and vegetables – Morphological and structural terminology
- ISO 1956-1:1982 (No part title)
- ISO 1956-2:1989 (No part title)
- ISO 1957:2000 Machine-made textile floor coverings — Selection and cutting of specimens for physical tests
- ISO 1958:1973 Textile floor coverings — Determination of mass of total pile yarn per unit area [Withdrawn: replaced with ISO 8543]
- ISO 1959:1973 Textile floor coverings — Determination of measured surface pile density and measured pile fibre volume ratio [Withdrawn: replaced with ISO 8543]
- ISO 1963:1973 Aircraft — Interchangeability dimensions of battery connectors for automatic coupling [Withdrawn without replacement]
- ISO 1964:1987 Shipbuilding – Indication of details on the general arrangement plans of ships
- ISO 1965:1973 Aluminium terminal ends for crimping to aircraft aluminium electrical cables
- ISO 1966:1973 Crimped joints for aircraft electrical cables
- ISO 1967:1974 Aircraft — Fire-resisting electrical cables — Dimensions, conductor resistance and mass
- ISO 1968:2004 Fibre ropes and cordage – Vocabulary
- ISO 1969:2004 Fibre ropes — Polyethylene — 3- and 4-strand ropes
- ISO 1970:1973 Ropes and cordage — Eight-strand plaited manila and sisal ropes [Withdrawn without replacement]
- ISO 1971:1975 Aircraft — Accessory drives and mounting pads
- ISO 1973:2021 Textile fibres — Determination of linear density — Gravimetric method and vibroscope method
- ISO 1974:2012 Paper — Determination of tearing resistance — Elmendorf method
- ISO 1975:1973 Magnesium and magnesium alloys — Determination of silicon — Spectrophotometric method with the reduced silicomolybdic complex
- ISO 1976:1975 Zinc alloys — Determination of copper content — Electrolytic method [Withdrawn without replacement]
- ISO 1977:2006 Conveyor chains, attachments and sprockets
- ISO 1980:1977 Nitric acid for industrial use — Determination of total acidity — Titrimetric method [Withdrawn without replacement]
- ISO 1981:1977 Nitric acid for industrial use — Determination of nitrous compounds — Titrimetric method [Withdrawn without replacement]
- ISO/R 1982:1971 Nitric acid for industrial use — Determination of iron content — 2,2'- Bipyridyl photometric method [Withdrawn without replacement]
- ISO 1983:1977 Nitric acid for industrial use — Determination of sulphated ash — Gravimetric method [Withdrawn without replacement]
- ISO 1984 Test conditions for manually controlled milling machines with table of fixed height – Testing of the accuracy
- ISO 1984-1:2001 Part 1: Machines with horizontal spindle
- ISO 1984-2:2001 Part 2: Machines with vertical spindle
- ISO 1985:2015 Machine tools — Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of the accuracy
- ISO 1986 Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table — Testing of the accuracy
- ISO 1986-1:2014 Part 1: Machines with table length of up to 1 600 mm
- ISO 1988:1975 Hard coal — Sampling [Withdrawn: replaced with ISO 18283]
- ISO/IEC 1989:2014 Information technology – Programming languages, their environments and system software interfaces – Programming language COBOL
- ISO 1990 Fruits – Nomenclature
- ISO 1990-1:1982 First list
- ISO 1990-2:1985 Second list
- ISO 1991 Vegetables – Nomenclature
- ISO 1991-1:1982 First list
- ISO 1991-2:1995 Part 2: Second list
- ISO 1992 Commercial refrigerated cabinets — Methods of test
- ISO 1992-1:1974 Part 1: Calculation of linear dimensions, areas and volumes [Withdrawn without replacement]
- ISO 1992-2:1973 Part 2: General test conditions [Withdrawn without replacement]
- ISO 1992-3:1973 Part 3: Temperature test [Withdrawn without replacement]
- ISO 1992-4:1974 Part 4: Defrosting test [Withdrawn without replacement]
- ISO 1992-5:1974 Part 5: Water vapour condensation test [Withdrawn without replacement]
- ISO 1992-6:1974 Part 6: Electrical energy consumption test [Withdrawn without replacement]
- ISO 1993 [Draft renamed ISO 1992-2]
- ISO 1994:1976 Hard coal — Determination of oxygen content [Withdrawn without replacement]
- ISO 1995:1981 Aromatic hydrocarbons — Sampling
- ISO 1996 Acoustics – Description, measurement and assessment of environmental noise
- ISO 1996-1:2016 Part 1: Basic quantities and assessment procedures[5]
- ISO 1996-2:2017 Part 2: Determination of sound pressure levels
- ISO 1997:2018 Granulated cork and cork powder — Classification, properties and packing
- ISO 1998 Petroleum industry – Terminology
- ISO 1998-1:1998 Part 1: Raw materials and products
- ISO 1998-2:1998 Part 2: Properties and tests
- ISO 1998-3:1998 Part 3: Exploration and production
- ISO 1998-4:1998 Part 4: Refining
- ISO 1998-5:1998 Part 5: Transport, storage, distribution
- ISO 1998-6:2000 Part 6: Measurement
- ISO 1998-7:1998 Part 7: Miscellaneous terms
- ISO 1998–99:2000 Part 99: General and index
- ISO 1999:2013 Acoustics – Estimation of noise-induced hearing loss[6]
Notes[edit]
- ^ This list generally excludes draft versions.
- ^ ISO deliverables include "specifications" (ISO/PAS, ISO/TS), "reports" (ISO/TR), etc, which are not referred to by ISO as "standards".
- ^ a b c d e f g h The exact wording of this title varies between parts. This is the wording of the most recently published part.
References[edit]
- ^ "Standards catalogue". ISO.
- ^ "Freely Available Standards". ISO.
- ^ U.S. Metric Study Interim Report (1971). Department of Commerce, National Bureau of Standards.
- ^ a b Dimensional Co-ordination in Building Current Trends in ECE Countries; Report–Part 59 (1967). United Nations. Economic Commission for Europe. Committee on Housing, Building and Planning. pg. 84
- ^ "Iso 1996-1:2016".
- ^ "Iso 1999:2013".