Repair command 3
Repair |
|
---|---|
( did not have an association badge ) |
|
active | 1967 to 1993 |
Country | Germany |
Armed forces | armed forces |
Armed forces | army |
Type | Repair command |
Insinuation | III. corps |
Staff seat | Koblenz |
The repair command 3 was one of the repair commands of the army of the Bundeswehr . The headquarters were in Koblenz . The repair command was part of the corps troops of III. Corps .
assignments
The repair command bundled the units of the repair troops at the level of the corps . The task was primarily to test , maintain and repair the weapon systems , vehicles and electronic devices such as telecommunications technology or drones of the corps troops of the III. Corps. The subordinate divisions and brigades led their own units of the repair force; Depending on the situation , the repair command supported these subordinate units . The repair command carried out repairs up to the field repair stage at most ; The supply commands 850 and 860 of the territorial army , which ran their own army repair works and depot repair groups , or which commissioned private companies, were responsible for work on higher material maintenance levels . The repair command's secondary task was to dispose of ordnance .
In peacetime around 1989, the repair command consisted of only around 1,500 active soldiers. In the event of a defense , the repair command was able to grow to around 2,800 men after mobilization through the summoning of reservists . Overall, the size of the repair command after mobilization was about 50% of the size of one of the brigades of the field army.
structure
Around 1989 the repair team was roughly divided into:
-
Staff / Staff Company Repair Command 3, Koblenz
- Repair Battalion 310 (partly active), Koblenz
- Repair battalion 320 (partly active), Koblenz
- Repair Battalion 330 (GerEinh), Koblenz
- Repair training company 9 / III, Bexbach (in peacetime to repair battalion 320)
- Repair training company 10 / III, Volkach (in peace to repair battalion 12)
- Repair training company 11 / III, Frankenberg (Eder) (in peace to repair battalion 310)
history
The repair command was set up around 1967 in anticipation of the takeover of Army Structure III . From 1972 at the latest, the location of the staff was the Rhine barracks in Koblenz . For the supply as the second pillar of the logistics corps of "sister organization" was replenishment command 3 responsibility.
After the end of the Cold War , the repair command was set up around 1993 at about the same time as the III. Corps decommissioned.
Association badge
Due to its planning as part of the dependent corps troops, the repair command did not have its own association badge . The soldiers therefore wore the association badge of the higher corps.
As a “badge”, the internal association badge of the staff and the staff company “ pars pro toto ” was sometimes used imprecisely for the entire repair team. In the right field of the shield it showed the federal eagle in the golden coat of arms, very similar to the III. Corps; in the left field as an indication of the electronic and mechanical systems to be repaired, a stylized atomic model and, similar to the beret badge of the repair troop, a gearwheel. The blue color of the left field corresponded to the blue weapon color of the military type.
Individual evidence
- ↑ a b O.W. Dragoons: The Bundeswehr 1989 . Army Office. I. Corps. II Corps. III. Corps. 4th edition. 2.1 - Army, February 2012 ( religte.com [PDF; accessed July 3, 2018]).
Coordinates: 50 ° 22 ' N , 7 ° 36' E