List of DIN standards / DIN 1–49999

This list is a sub-list of the list of DIN standards .

DIN 1-4999

The lists of standards in the number range 1 to 4999 contain all current standards (as of June 2017) and many historical standard editions.

Number ranges
DIN 1 to 499	DIN 500 to 999
DIN 1000 to 1499	DIN 1500 to 1999
DIN 2000 to 2499	DIN 2500 to 2999
DIN 3000 to 3499	DIN 3500 to 3999
DIN 4000 to 4499	DIN 4500 to 4999

The following applies to the number range 5000 to 49999

The list does not claim to be complete
The list does not claim to be up-to-date
The strikethrough standards are historical standard editions that are no longer valid
The standard titles are listed in the spelling valid at the time the relevant standard was published

DIN 5000-5999

DIN 5004 business forms - change of unit
DIN 5005 paper and cardboard - ring binder inserts - hole diameter, hole center distances for the formats A4 and A5
DIN 5007 arrangement of character strings
- Part 1 General rules for processing (ABC rules)
- Part 2 heading rules for the alphabetical order of names
DIN 5008 writing and design rules for text and information processing
DIN 5009 dictation rules
~~DIN 5012 short communication~~ , October 2008 withdrawn without replacement
~~DIN 5013 pendulum letter~~ , October 2008 withdrawn without replacement
DIN 5016 business forms - delivery schedule
DIN 5018 business forms - shipping order
DIN 5023 opaque paint box
DIN 5030 spectral radiation measurement
- Part 1 Terms, sizes, key figures
- Part 2 emitters for spectral radiation measurements; Selection criteria
- Part 3 Spectral Disposal; Terms and identifying features
- Part 5 physical receivers for spectral radiation measurements; Terms, parameters, selection criteria
DIN 5031 radiation physics in the optical field and lighting technology
- Supplement 1 table of contents about sizes, symbols and units as well as index to DIN 5031 part 1 to part 10
- Part 1 quantities, symbols and units of radiation physics
- Part 2 radiation assessment by receivers
- Part 3 quantities, symbols and units of lighting technology
- Part 4 degrees of efficiency
- Part 5 temperature terms
- Part 6 pupil light intensity as a measure of the retinal illumination
- Part 7 Designation of the wavelength ranges
- Part 8 Radiation-physical terms and constants
- Part 9 Luminescence Terms
- Part 10 Photobiologically effective radiation, sizes, abbreviations and effect spectra
DIN 5032 light measurement
- Part 1 Photometric Methods
- Part 2 Operation of electric lamps and measurement of the associated quantities
- Part 3 measurement conditions for gas lights
- Part 4 measurements on lights
- Part 6 photometer; Terms, properties and their labeling, October 2004 replaced by DIN EN 13032-1
- Part 7 Classification of illuminance and luminance meters
- Part 8 data sheet for illuminance meters
- Part 9 Measurement of the photometric quantities of incoherently radiating semiconductor light sources
DIN 5033 color measurement
- Part 1 basic terms of colorimetry
- ~~Part 2 norm valence systems~~
- ~~Part 3 color dimensions~~
- ~~Part 4 spectral method~~
- ~~Part 5 equality procedure~~
- ~~Part 6 three-area procedure~~
- Part 7 measurement conditions for body colors
- Part 8 measurement conditions for light sources
- Part 9 white standard for calibration in color measurement and photometry
DIN 5034 daylight indoors
- Part 1 General Requirements
- Part 2 basics
- Part 3 calculation
- Part 4 Simplified determination of minimum window sizes for living spaces
- Part 5 measurement
- Part 6 Simplified determination of appropriate dimensions of skylight openings in roof areas
DIN 5035 lighting with artificial light
- ~~Part 1 Terms and general requirements~~ , September 2002 replaced by DIN EN 12665
- ~~Part 2 Standard values for workplaces indoors and outdoors~~ , October 2007 replaced by DIN EN 12464-1 / 2
- Part 3 lighting in healthcare
- ~~Part 4 interior lighting with artificial light; Special recommendations for the lighting of educational establishments~~ , withdrawn without replacement in October 2007, since March 2003 largely replaced by DIN EN 12464-1
- ~~Part 5 interior lighting with artificial light; Emergency lighting~~ , replaced by DIN EN 1838 in August 1999
- Part 6 measurement and evaluation
- Part 7 Lighting of rooms with computer workstations
- Part 8 workplace lights; Requirements, recommendations and testing
DIN 5036 Physical radiation and photometric properties of materials
- Supplement 1 Table of Contents and Index
- Part 1 Terms, key figures
- Part 3 measurement methods for photometric and spectral radiation-physical characteristics
- Part 4 classification
DIN 5037 Lighting evaluation of headlights
- Supplement 1 Simplified useful light assessment for film, television and stage spotlights with rotationally symmetrical light distribution
- Supplement 2 Simplified useful light assessment for film, television and stage spotlights with light distribution symmetrical to one or two mutually perpendicular planes
~~DIN 5038 rules on objective photometry~~
DIN 5039 light, lamps, luminaires - terms, classification
DIN 5040 lights for lighting purposes
- Part 1 lighting characteristics and classification
- Part 2 interior lights; Terms, classification
- Part 3 exterior lights, terms, classification
- Part 4 lighting spotlights; Terms and lighting evaluation parameters
DIN 5042 combustion lamps and gas lights
- Part 1 classification, terms
- Part 2 ceramic mouthpieces, dimensions
- Part 3 gas incandescent body, dimensions
- Part 4 gas incandescent bodies for street lighting; Requirements and tests
- Part 5 pilot burner, hanging arrangement, form A
- Part 6 pilot burner, standing arrangement
- Part 7 fixed nozzles
- Part 8 nozzles and union nuts for air regulation
~~DIN 5043 radioactive luminous pigments and luminous colors~~
- ~~Part 1 measurement conditions for the luminance and designation of the pigments~~
- ~~Part 2 measurement conditions for the luminance and designations of the luminous colors~~
~~DIN 5044 Stationary traffic lighting; Lighting of roads for motor vehicle traffic; General quality characteristics and guide values~~
~~DIN 5045 measuring device for DIN volumes; Guidelines~~
DIN 5046 hooks for meat and other foods; S-hook
DIN 5047 hooks for meat and other foods; Tube track sliding hook
DIN 5048 hooks for meat and other foods; Tube track roller hook
DIN 5059 packaging; Tubes of metal and plastic
- Part 1 tubes of metal; Tube necks, tube shoulders
- Part 2 tubes made of plastic; Tube necks
DIN 5060 packaging - closure of the tube end
DIN 5065 packaging - plastic closures for metal tubes
DIN 5079 packaging - boxes made of solid cardboard or corrugated cardboard
- Part 1 For cylindrical aluminum tubes
DIN 5090 packaging - packaging bottles
DIN 5097 packaging aids - clip closures for bottles
DIN 5107 shot chisel; Cold chisel
DIN 5108 mason's hammers
DIN 5109 carpenter's hammers
DIN 5111 handles made of wood for hammers up to 2 kg
DIN 5112 wooden handles for hammers over 2 kg
Screw clamp marked DIN 5117

DIN 5117 screw clamps
DIN 5118 tools of punching technology - cutting punches with trombone neck
DIN 5128 rubber hammers
DIN 5129 splitting hammers
DIN 5130 copper hammers - dimensions and technical delivery conditions
DIN 5131 axes
DIN 5132 ax handles
DIN 5133 welding hammer
DIN 5134 saw blades for wood
- Part 1 Technical delivery conditions for band saw blades
- Part 2 Technical delivery conditions for hand saw blades
- Part 4 Technical delivery conditions for circular saw blades made of tool steel
- Part 5 Technical delivery conditions for circular saw blades with carbide inserts
DIN 5135 wooden handles for mallets up to 2 kg
DIN 5136 soft face hammers - Technical delivery conditions
DIN 5138 chisel handles
DIN 5139 chisel
DIN 5142 gouge
DIN 5143 mortise chisels
DIN 5144 woodturner's chisel
~~DIN 5145 plane~~
~~DIN 5146 roughing plane~~
DIN 5152 plane iron; Technical delivery conditions
DIN 5154 gouge; Technical delivery conditions
DIN 5155 gouge; Designations
DIN 5156 machine taps with stepped shank (overflow drill) for pipe threads G 1/16 to G 2 and Rp 1/16 to Rp 2
DIN 5157 set of taps - two-part set for pipe threads G 1/16 to G 4 and Rp 1/16 to Rp 4
DIN 5194 Tapered square shafts on drilling winch tools for wood
DIN 5200 screwing tools - offset screwdrivers for slotted screws - dimensions and requirements
DIN 5208 offset screwdriver for screws with cross recess
~~DIN 5228 flat scraper~~ , replaced by DIN 8350
DIN 5234 pipe wrenches; Swedish model
DIN 5235 adjusting pliers
DIN 5253 punch for blacksmiths
DIN 5254 pliers for retaining rings for shafts
DIN 5256 pliers for retaining rings for bores
DIN 5264 screwdriver for screws with slot - assignment of screwdriver tips for screws with slot
DIN 5279 patent chains; Chain links made of sheet metal
DIN 5280 ball chains
DIN 5287 simplex hooks (spring hooks from one piece)
DIN 5289 snap hook , scissor- shaped
DIN 5290 snap hook made of light metal
- Part 1 with union nut; Dimensions, requirements and testing
- Part 2 without union nut; Dimensions, technical delivery conditions
DIN 5291 roller buckles
DIN 5292 clamping buckles
DIN 5293 eyelets for belts and straps
DIN 5294 buttons for screwing in and riveting
DIN 5295 clamping plates for belts and straps
DIN 5296 rings
DIN 5297-1 snap hook
- Part 1 with rectangular ring, closure by leaf spring
- Part 2 with round and oval ring, closure by leaf spring
- Part 3 with rectangular and round ring, flap with handle
DIN 5299 snap hook made of half-round wire, round wire and forged
DIN 5300 sewing and clothing machines - terms of sewing technology
- Part 1 sewing, sewing stitch, sewing stitch type, sewing seam
- Part 2 machine, machine functions
- Part 3 sewing material, sewing thread
- Part 4 sewing functions
- Part 5 additional equipment, cutting processes and parameters
DIN 5307 sewing and clothing machines - vocabulary, classification, terms
DIN 5310 industrial sewing machines; Safety requirements
DIN 5318 industrial sewing machines
- Part 1 sewing foot, connection dimensions
- Part 2 sewing foot, safety requirements
DIN 5319 industrial sewing machines; Fabric presser bar with prismatic mount, connection dimensions
DIN 5325 sewing machines; Needles, comparison of metric and other thickness designations
DIN 5330 sewing machines
- Part 1 needles, names, parameters
DIN 5340 terms of physiological optics
DIN 5381 color codes
DIN 5401 rolling bearings - balls for rolling bearings and general industrial needs
DIN 5402 rolling bearings - rolling bearing parts
- Part 1 cylindrical rollers
- ~~Part 2 rollers~~ (withdrawn)
- Part 3 needle rollers
DIN 5405 roller bearings - needle roller bearings
- Part 1 radial needle roller and cage assemblies
- Part 2 axial needle roller and cage assemblies
- Part 3 axial washers
DIN 5406 Rolling Bearings - Nut Locks; Lock washer , locking bracket
DIN 5412 rolling bearings - cylindrical
roller bearings
- Part 1 single row, with cage, angle rings
- Part 4 two rows, with cage, increased accuracy
- Part 11 single row, with cage, for rail vehicle wheelset bearings

DIN 5415 rolling bearings - adapter sleeves

DIN 5416 rolling bearings - withdrawal sleeves

DIN 5417 mounting parts for roller bearings - snap rings for bearings with annular groove

DIN 5418 rolling bearings; Dimensions for installation

DIN 5419 rolling bearings - seals for rolling bearings - dimensions for felt rings and felt strips

~~DIN 5425 tolerances for the installation of rolling bearings~~

~~DIN 5426 rolling bearings - running noise of rolling bearings~~

~~Part 1 method for measuring structure-borne noise~~

DIN 5429 roller bearings - combined needle roller bearings

Part 1 needle roller thrust cylindrical roller bearings, needle roller thrust ball bearings
Part 2 needle angular contact ball bearings

DIN 5435 hand pumps; Two-hole flanges with shoulder, for nominal pressure 1 to 2.5

DIN 5437 hand pumps; Vane pumps; Sizes, performance, dimensions

~~DIN 5450 standard atmosphere~~ (invalid)

DIN 5464 splines with wedge flanks - heavy series

DIN 5466 load capacity calculation of toothed and splined shaft connections

Part 1 basics

DIN 5471 machine tools; Splined shaft and splined hub profiles with 4 splines, internal centering, dimensions

DIN 5472 machine tools; Splined shaft and splined hub profiles with 6 splines, internal centering, dimensions

DIN 5473 logic and set theory; Signs and concepts

~~DIN 5474 symbols of mathematical logic~~

~~DIN 5475 complex sizes~~

DIN 5477 percent, per mille; Terms, application

DIN 5478 standards in graphic representations

DIN 5480 splines with involute flanks and reference diameter
- ~~Part 4~~ pressure angle ~~30 °, nominal dimensions, measured variables, module 1.25~~ , May 2005 replaced by DIN 5480-2: 2005-06
- ~~Part 5~~ pressure angle ~~30 °, nominal dimensions, measured variables, module 1.5~~ , May 2005 replaced by DIN 5480-2: 2005-06
- ~~Part 6~~ pressure angle ~~30 °, nominal dimensions, measured variables, module 2~~ , May 2005 replaced by DIN 5480-2: 2005-06
- ~~Part 7~~ pressure angle ~~30 °, nominal dimensions, measured variables, module 2.5~~ , May 2005 replaced by DIN 5480-2: 2005-06
- ~~Part 8~~ pressure angle ~~30 °, nominal dimensions, measured variables, module 3~~ , May 2005 replaced by DIN 5480-2: 2005-06
- ~~Part 9~~ pressure angle ~~30 °, nominal dimensions, measured variables, module 4~~ , May 2005 replaced by DIN 5480-2: 2005-06
- ~~Part 10~~ pressure angle ~~30 °, nominal dimensions, measured variables, module 5~~ , May 2005 replaced by DIN 5480-2: 2005-06
- ~~Part 11~~ pressure angle ~~30 °, nominal dimensions, measured variables, module 6~~ , May 2005 replaced by DIN 5480-2: 2005-06
- ~~Part 12~~ pressure angle ~~30 °, nominal dimensions, measured variables, module 8~~ , May 2005 replaced by DIN 5480-2: 2005-06
- ~~Part 13~~ pressure angle ~~30 °, nominal dimensions, measured variables, module 10~~ , May 2005 replaced by DIN 5480-2: 2005-06
- ~~Part 14~~ pressure angle ~~30 °, flank fits, tolerances~~ , May 2005 replaced by DIN 5480-1: 2005-06

DIN 5481 splines with notched flanks

Correction 1

~~DIN 5482 tooth hub profiles and splined shaft profiles with involute flanks~~

~~Part 1 Dimensions~~ , February 1987 withdrawn without replacement
~~Part 2 Profiles for Hobs~~ , February 1987 withdrawn without replacement
~~Part 3 Tooth gap and tooth thickness measurement with measuring ball or measuring cylinder~~ , February 1987 withdrawn without replacement

DIN 5483 time-dependent quantities

Part 1 Names of Time Dependency
Part 2 formula symbols
Part 3 Complex representation of sinusoidal time-dependent quantities

DIN 5485 naming principles for physical quantities; Word compositions with adjectives and basic words

DIN 5486 ~~notation of matrices~~

DIN 5487 Fourier, Laplace and Z transformation; Signs and concepts

~~DIN 5488 terms for time-dependent processes~~ (edition February 1964, invalid)

~~DIN 5489 sense of direction and sign in electrical engineering~~

~~DIN 5490 use of the words related, specific, relative, standardized and reduced~~ (replaced by DIN 5485 in July 2002)

DIN 5491 mass transfer; Diffusion and mass transfer, basic terms, quantities, formula symbols, parameters

DIN 5493 Logarithmic sizes and units

~~Part 1 General principles, sizes and units of information theory~~ , July 2004 replaced by DIN IEC 60027-3
~~Part 2 Logarithmic proportions, dimensions, levels in neper and decibel~~
~~Part 2 Supplement 1, logarithmized proportions, levels, reference symbols for reference values and measurement conditions~~

~~DIN 5494 size systems and unit systems~~ (invalid)

DIN 5496 temperature radiation from volume radiators

~~DIN 5498 Chemical Thermodynamics; Formula symbol~~ (invalid)

DIN 5499 calorific value and calorific value; Terms

~~DIN 5510 Preventive fire protection in rail vehicles~~

~~Part 1 fire protection levels, fire protection measures and evidence~~
~~Part 2 Burning behavior and secondary fire effects of materials and components - classification, requirements and test methods~~
~~Part 4 Structural design of the vehicles; Safety requirements~~
~~Part 5 Electrical equipment; Safety requirements~~
~~Part 6 accompanying measures; Function of the emergency braking device, information systems, fire alarm systems, fire fighting equipment; Safety requirements~~

DIN 5513 materials for rail vehicles - aluminum and aluminum alloys

DIN 5517 semi-finished products for rail vehicles - profiles, rods, tubes and sheets made of aluminum alloys

Part 1 selection standard

DIN 5520 semi-finished products for rail vehicles - bending radii for sheets and strips made of aluminum and aluminum alloys

DIN 5525 bolts without head for rail vehicles

DIN 5526 bolts with head for rail vehicles

DIN 5542 leaf spring ends for rail vehicles

DIN 5543 leaf springs; Spring saddle plates, spring intermediate plates for spring suspension

DIN 5545 hook suspension for rail vehicles, for freight car running gear with leaf springs

DIN 5560 rail vehicles - longitudinal strength of the vehicle bodies of light railcars

DIN 5586 compressed air equipment for rail vehicles; Screw plugs with collar and ventilation

DIN 5589 compressed air equipment for rail vehicles - safety valves with normal stroke and full stroke - installation and connection dimensions, requirements

DIN 5590 compressed air equipment for rail vehicles - air tanks made of steel - dimensions, designation

DIN 5606 testing of threads on workpieces for rail vehicles

Part 2 round thread, trapezoidal thread, rounded trapezoidal thread

DIN 5607 delivery delimitation between the suppliers of vehicle parts and electrical and, if necessary, air-conditioning parts of rail vehicles

DIN 5651 brake block shoes and fastening wedges for split brake blocks on rail vehicles; Technical delivery conditions

DIN 5683 round steel chains - barrel chains for anchorage of nautical signs

Part 1 round steel chains, quality class 4
Part 2 individual parts, quality class 4
Part 3 compilation

DIN 5684 round steel chains for hoists

Part 1, quality class 5, true to gauge, tested
Part 2, quality class 6, true to gauge, tested

DIN 5684 round steel chains - Finely toleranced hoist chains

Part 3 quality class T (version T, DAT and DT)

DIN 5685 round steel chains without load test

Part 1 long links
Part 2 semi-long link
Part 3 in short

DIN 5686 knot chains without quality requirements

DIN 5687 round steel chains

Part 1 quality class 5, medium tolerance, tested

DIN 5688 chain slings

Part 1 hook chains, ring chains, individual parts; Grade 5
Part 3 individual links, quality class 8; Text in German and English

DIN 5692 round steel chains - Forged individual parts - Chain shorteners, quality class 8

DIN 5696 round steel chains - round steel chains, pitch 3.5d, for chain strands in bucket elevators

Part 1 quality class 2, case-hardened

DIN 5698 round steel chains - round steel chains, pitch 2.8d, for chain strands in bucket elevators

Part 1 quality class 2, case-hardened

DIN 5699 chain bracket for continuous conveyors

DIN 5881 petroleum industry - wire ropes and rope drives

Part 1 wire ropes
Part 2 rope drives

DIN 5902 brackets for grooveless wide base rails - dimensions and steel types

DIN 5903 bracket screws

Part 1 With round head and oval attachment
Part 2 with square head

DIN 5904 steel sleeper profiles - dimensions, static values and steel types

DIN 5906 clamping plates for grooveless wide base rails - dimensions and steel types

DIN 6000-6999

DIN 6063 thread, preferably for plastic containers
- Part 1 buttress thread, dimensions
- Part 2 trapezoidal thread, dimensions
DIN 6075 packaging - bottles
- Part 1 Vichyform 1
- Part 2 Vichyform 2
~~DIN 6080 packaging; Reusable wine bottles; 0.75 l burgundy shape~~
DIN 6094
- Part 3 packaging material - mouth - hole mouthpieces
- Part 5 Packaging - Mouthpieces - Mouthpieces for champagne and sparkling wine bottles with plastic and cork stoppers and crown corks
- Part 8 packaging - mouthpieces - with external thread
- Part 10 packaging - mouthpieces for wide-neck packaging glasses - beaded rim mouthpieces
- ~~Part 12 packaging - mouthpieces for bottles - screw mouthpieces 7.5 R for bottles with internal pressure~~
- Part 13 packaging - mouthpieces - 2-thread and 3-thread threaded mouthpieces
- ~~Part 14 Product illustration - Packaging - Mouthpieces for bottles - Screw mouthpiece 8 G for bottles with internal pressure~~
DIN 6096 packaging - 0.75 l bottle for sparkling wine and sparkling wine
DIN 6099 packaging - crown corks
DIN 6106 packaging - glass containers - side and bottom cams
DIN 6110 packaging - reusable glasses with a nominal volume of 212 ml, 425 ml, 580 ml, 720 ml
DIN 6111 packaging - pressurized gas packs - for multiple use with equipment not intended for separation
DIN 6113 packaging - Electronic identification of rigid industrial packaging, positioning and system parameters for passive RFID chips
- Part 1 General
- Part 2 steel bung barrel and steel lid barrel with bung with a total volume greater than 200 l
- Part 3 steel lidded barrel without bung with a total volume greater than 200 l
- Part 4 fiber drum with a nominal volume of up to 250 l
- Part 5 plastic barrel and lidded barrel with bung with a nominal volume greater than 200 l
- Part 6 plastic lidded barrel without bung with a nominal volume greater than 200 l
- Part 7 combination IBC
DIN 6120 Marking of packaging materials and packaging for their recycling - packaging materials and packaging made of plastic
- Part 1 symbols
- Part 2 additional designation
DIN 6121 packaging - labeling of measuring containers
DIN 6129 packaging - bottles and hollow bodies made of glass
- Part 1 General tolerances of fully automated bottles
- Part 2 volume
DIN 6130 packaging; Bottles and hollow bodies made of plastic, general tolerances for weight and volume
DIN 6139 Packaging - Oxygen absorbers for packaging applications
- Part 1 Determination of the capacity
- Part 2 Determination of the reaction rate
DIN 6141 packaging - lid container made of fiber (fiber drums) with base and lid made of steel
~~DIN 6160 anomaloscopes for the diagnosis of red-green color ametropia~~
DIN 6162 Determination of the iodine color number
DIN 6163 colors and color borders for signal lights on railways and in local public transport
- ~~Part 1 General~~
- ~~Part 2 Fixed signal lights on sea and inland waterways~~
- ~~Part 3 signal lights on road vehicles and trams~~
- ~~Part 4 signal lights of the railway~~
- ~~Part 5 Fixed signal lights in local public transport~~
- ~~Part 6 signal lights on watercraft~~
DIN 6164 DIN color chart
- ~~Supplement 50 color dimensions for standard illuminant C~~
- Part 1 System of the DIN color chart for the 2 ° normal observer
- Part 2 Determination of the color samples
DIN 6167 Description of the yellowing of almost white or almost colorless materials
DIN 6169 color rendering
- Part 1 General Terms
- Part 2 Color rendering properties of light sources in lighting technology
- Part 4 method for the identification of color rendering in color photography
- Part 5 procedure for the identification of object-related color rendering in multi-color printing
- Part 6 method for the identification of color reproduction in color television technology with image recording devices
- Part 7 method for the identification of the color reproduction in the television color film scanning
- Part 8 method for the identification of color image-related color reproduction in multicolor printing
DIN 6170 anaglyph method in stereoscopy
- Part 1 terms
DIN 6171 oversight colors for traffic signs and traffic facilities
DIN 6172 metamerism index of pairs of specimens when the type of light changes
DIN 6173 color matching
- Part 1 General color matching conditions
- Part 2 lighting conditions for artificial mean daylight
~~DIN 6174 Colorimetric determination of color dimensions and color differences in the approximately uniform CIELAB color space~~
DIN 6175 color tolerances for automotive paintwork
- Part 1 solid colors
- Part 2 effect paints
DIN 6176 Colorimetric determination of color differences in body colors according to the DIN99 formula
DIN 6198 packaging; Bottles; Euroform 2
~~DIN 6199 Steinieform 0.33-l beer bottle~~ , withdrawn in May 2004 without replacement
DIN 6260 internal combustion engines
- Part 6 parts for reciprocating engines, cooling, terms
DIN 6261 internal combustion engines; Parts for rotary piston engines, external structure, engine, terms
DIN 6267 internal combustion engines; Types of oil lubrication, terms
~~DIN 6270 internal combustion engines for general use~~
- ~~Supplement 1 Conversion factors for continuous output at the operating location compared to the reference state~~
- ~~Supplement 2 conversion factors for the specific fuel consumption at the operating location compared to the reference state~~
DIN 6271 reciprocating internal combustion engines
- Part 3 requirements; Performance tolerances; Supplementary specifications for DIN ISO 3046 part 1
DIN 6274 internal combustion engines for general use; Compressed air tank with valve head; 38 mm passage; Compilation
DIN 6275 internal combustion engines for general use; Compressed air tank for permissible operating pressure up to 30 bar
DIN 6276 internal combustion engines for general use; Valve heads for compressed air tanks; 38 mm passage

DIN 6280 reciprocating internal combustion engines - power generation units with reciprocating internal combustion engines

~~Part 1 General Terms~~
~~Part 2 performance design and rating plates~~
~~Part 3 operating limit values for the engine, generator and aggregate behavior~~
~~Part 4 speed control and speed behavior of reciprocating internal combustion engines; Terms~~
~~Part 5 operating behavior of synchronous generators for the aggregate operation~~
~~Part 6 operating behavior of asynchronous generators for the aggregate operation~~
~~Part 7 switching and control devices for the aggregate operation; conditions~~
~~Part 8 operating behavior in aggregate operation; Terms~~
~~Part 9 acceptance test~~
Part 10 power generating sets of small power; Requirements and testing
Part 12 Power generating sets - Uninterruptible power supply - Part 12: Dynamic UPS systems with and without reciprocating internal combustion engine
Part 13 Power generating sets - Power generating sets with reciprocating internal combustion engines - Part 13: For safety power supply in hospitals and in structures for gatherings of people
Part 14 Power generating sets - Power generating sets with reciprocating internal combustion engines - Part 14: Combined heat and power units (CHP) with reciprocating internal combustion engines; Basics, requirements, components, execution and maintenance
Part 15 Power generating sets - Power generating sets with reciprocating internal combustion engine - Part 15: Combined heat and power units (CHP) with reciprocating internal combustion engines; exams

DIN 6281 power generating sets with piston engines; Connection dimensions for generators and piston engines

DIN 6288 reciprocating internal combustion engines - Connection dimensions and requirements for flywheels and flexible couplings

DIN 6300 Devices for fixing the position of workpieces during form-changing manufacturing processes - names and their abbreviations

DIN 6303 knurled nuts

DIN 6304 tommy screws with fixed toggle

DIN 6305 toggle nuts with fixed toggle

DIN 6306 toggle screws with loose toggle

DIN 6307 toggle nuts with loose toggle

DIN 6310 snapper with compression springs for drilling devices

DIN 6311 thrust pads

DIN 6314 clamping arm, flat

DIN 6315 clamping arm, fork-shaped

DIN 6316 clamping arm, cranked

DIN 6318 stair trestles for clamping iron support

DIN 6319 spherical washers - conical sockets

Correction 1

DIN 6320 feet with threaded pin, for devices

DIN 6321 locating and supporting bolts

DIN 6323 loose slot nuts

DIN 6326 clamping pads, adjustable

DIN 6327 adjusting sleeves with tool cone

Part 1 short design
Part 2 long design
Part 3 separate design
Part 4 lock nuts and lock nuts

DIN 6330 hexagon nuts 1.5 d high

DIN 6331 hexagon nuts 1.5 d high with collar

DIN 6332 grub screws with pressure pin

DIN 6335 cross handles

DIN 6336 star handles

DIN 6337 ball handles

DIN 6338 insertion grooves

DIN 6340 washers for clamping tools

DIN 6341 draw-back collets

Part 1 collets, collet holder
Part 2 collet thread; Nominal dimensions, limit dimensions

DIN 6343 pressure collets

DIN 6345 recordings of pressure lamellar collets for tool clamping

DIN 6346 parallel pieces

DIN 6349 three-jaw drill chucks - Technical delivery conditions

DIN 6350 lathe chucks, manually operated - clamping jaws centrically clamping

Part 1 cylindrical center mount
Part 2 centering mount by centering cone 1: 4

DIN 6351 lathe chucks, hand-operated - clamping jaws centrically clamping and individually adjustable

Part 1 cylindrical center mount
Part 2 centering mount by centering cone 1: 4

DIN 6352 chuck flanges with centering cone 1: 4

Part 1 base flanges

DIN 6353 lathe chuck, power-operated, without passage - clamping jaw holder according to the type of cross-offset

DIN 6354 milling arbors with steep taper, complete

DIN 6355 milling arbors with steep taper

DIN 6357 arbors with steep taper shank for milling cutter heads and milling heads with internal centering

DIN 6358 shell mill arbors with steep taper shank for milling cutters with longitudinal and transverse groove

DIN 6359 adapter sleeves with steep taper shank for cylindrical shanks with lateral driving surface and inclined clamping surface

Part 1 Form A with steep taper shank according to DIN 2080-1
Part 2 Form B with steep taper shank according to DIN 69871-1

DIN 6360 shell milling cutter arbors with steep taper for milling cutters with longitudinal groove

DIN 6364 adapter sleeves with steep taper shank for Morse taper shanks with tightening thread

DIN 6366 driving rings for shell mill arbors

DIN 6367 milling cutter screws for shell mill arbors

DIN 6368 key for milling cutter tightening screws

DIN 6370 clamping tools; Machine vices, clamping range, connection dimensions, permissible deviations, clamping jaws

DIN 6371 swivel discs for devices

DIN 6372 push-on washers for devices

DIN 6374 grinding mandrels; Workpiece arbors

DIN 6379 studs for nuts for T-slots

DIN 6385 short boring bars with steep taper

DIN 6386 lathe chucks

Part 1: Technical delivery conditions for hand-operated lathe chucks

DIN 6386 lathe chucks, without passage

Part 2: Technical delivery conditions for power-operated lathe chucks

DIN 6391 chuck with steep taper shank for collets with taper 1:10 for tool clamping

DIN 6393 quick change adapters for taps - Rigid

DIN 6397 tile trowel

~~DIN 6403 measuring tapes made of steel with roll-up frame or roll-up capsule~~

DIN 6406 loops

DIN 6434 rivet puller

DIN 6435 rivet head maker

DIN 6436 pickaxes

DIN 6437 hoe handles

Part 1 dimensions, requirements, testing
Part 2 lessons

DIN 6438 manual tin snips

DIN 6439 smoothing trowel

DIN 6440 trowels

DIN 6441 cleaning trowels

DIN 6442 wood drill; Slot milling cutter

DIN 6444 wood drill; Auger bits

DIN 6445 wood drill; Ring-grip drill

DIN 6446 wood drill; Sinker

DIN 6447 wood drill; Center drill

DIN 6449 wood drill; Rod auger bits

DIN 6450 pin punch

DIN 6451 cross chisel

DIN 6453 flat chisel

DIN 6455 grooving chisel

DIN 6458 punch

DIN 6461 wood drill; Long hole milling drill, short

DIN 6464 wood drill; Auger bits

DIN 6465 boiler stone hammer

~~DIN 6473 hand saws for metal; Saw bow~~

DIN 6475 hammer

DIN 6480 box chisel; Box opener

~~DIN 6481 crate rasp (replacement for Erfa 6481)~~ , standard withdrawn

DIN 6485 spring internal button (replacement for Erfa 6485)

DIN 6486 pointed compass (replacement for Erfa 6486)

DIN 6487 spring-pointed compass (replacement for Erfa 6487)

DIN 6491 light metal hammers

DIN 6494 hand saws for metal - longitudinal saw blades

DIN 6495 machine saw blades for metal - saw blades for hacksaw machines

DIN 6513 quarter round profile cutter, concave

Part 1 dimensions
Part 2 Technical delivery conditions

DIN 6518 quarter round profile milling cutter with parallel shank, concave

Part 1 dimensions
Part 2 Technical delivery conditions

DIN 6527 solid carbide end mill with stepped straight shank - dimensions

DIN 6528 solid carbide end mill with continuous straight shank - dimensions

DIN 6529 solid carbide end mill with straight shank; Technical delivery conditions

DIN 6535 cylindrical shanks for twist drills and end mills made of hard metal; Dimensions

DIN 6537 solid carbide twist drill with stepped straight shank; Dimensions

DIN 6538 twist drill with carbide cutting edges with reinforced straight shank

Part 1 dimensions

DIN 6539 solid carbide twist drill with straight through shank; Dimensions

DIN 6540 Technical delivery conditions for solid carbide twist drills according to DIN 6537 and DIN 6539

Part 1 requirements
Part 2 exam

DIN 6580 terms of machining technology; Movements and geometry of the machining process

DIN 6581 terms of machining technology; Reference systems and angles on the cutting part of the tool

DIN 6582 terms of machining technology; Supplementary terms on the tool, on the cutting wedge and on the cutting edge

DIN 6583 terms of machining technology; Stand terms

DIN 6584 terms of machining technology; Forces, energy, work, performance

DIN 6590 indexable inserts made of hard metal with cutting edges, without drilling

DIN 6594 drill with tapered hollow shank and cooling lubricant supply according to DIN 69893-1 Form A for indexable inserts - main dimensions

DIN 6595 drill bits with indexable inserts; Cylindrical shanks

DIN 6596 drill with tapered hollow shank and cooling lubricant supply according to DIN 69893-1 Form A for indexable inserts - designation

DIN 6597 tool holder for external and internal turning with hollow taper shank for indexable inserts - description

DIN 6598 tool holder for external and internal turning with hollow taper shank for indexable inserts - overview, assignment of dimensions

DIN 6600 Execution of containers (tanks) made of steel for the storage of liquids - in-house production control

DIN 6601 Resistance of the materials of containers (tanks) made of steel to liquids (positive liquid list)

Correction 1

DIN 6607 External coatings of underground tanks made of steel - Requirements and testing

~~DIN 6618 Vertical containers (tanks) made of steel~~

~~Part 1 single-walled, for the above-ground storage of water-polluting, flammable and non-flammable liquids~~
~~Part 2 double-walled, without leak detection liquid for the above-ground storage of water-polluting, flammable and non-flammable liquids~~
~~Part 3 double-walled, with leak detection liquid for the above-ground storage of water-polluting, flammable and non-flammable liquids~~
~~Part 4 double-walled, without leak detection liquid, with external vacuum suction line, for above-ground storage of flammable liquids~~

DIN 6623 Standing containers (tanks) made of steel with a nominal volume of less than 1000 liters for the above-ground storage of liquids

Part 1 single walled
Part 2 double-walled

DIN 6624 Horizontal containers (tanks) made of steel with a volume of 1000 to 5000 liters

Part 1 single-walled, for the above-ground storage of water-polluting, flammable and non-flammable liquids
Part 2 double-walled, for the above-ground storage of water-polluting, flammable and non-flammable liquids

DIN 6625 Square containers made of steel for the above-ground storage of liquids with a flash point of more than 55 ° C

Part 1 construction and testing principles
Part 2 calculation

DIN 6626 dome shafts made of steel for containers for underground storage of water-polluting, flammable and non-flammable liquids

~~DIN 6627 dome shaft collar for masonry dome shafts for containers for underground storage of water-polluting, flammable and non-flammable liquids~~

DIN 6644 packaging; Lid container made of steel

Part 2 clamping ring lever locks
Part 4 with removable lid, stackable, with corrugated beads

DIN 6646 packaging - bung and lid containers made of steel - drop handle

DIN 6647 packaging - cylindrical beverage and raw material containers

Part 1 Permissible operating pressure up to 3 bar, nominal volume up to 50 liters
Part 2 Permissible operating pressure up to 7 bar, nominal volume up to 50 liters
Part 3 Permissible operating pressure up to 3 bar, nominal volume greater than 100 liters
Part 4 Disposable packaging with permissible operating pressure up to 4 bar, nominal volume up to 60 liters

DIN 6650 beverage dispensing systems

Part 1 General Requirements
~~Part 2 material requirements~~
~~Part 3 Safety requirements for components and system parts~~
~~Part 4 Hygiene requirements for components and systems~~
Part 5 Safety, hygienic and application-related requirements for ready-to-use beverage dispensing systems, component groups and components as well as their testing
Part 6 requirements for cleaning and disinfection
Part 7 Hygienic requirements for the construction of beverage dispensing systems
Part 8 Requirements for piped water systems
Part 9 Free standing water systems

DIN 6651 pneumatic tube - operating modes

DIN 6653 beverage dispensing systems - equipment parts

Part 1 Beverage or raw material lines
Part 2 Requirements for the operational behavior and test methods of carbon dioxide warning systems
Part 3 Requirements for manual glasswashers with spatially separated pre-wash and final-wash
Part 4 Mobile flow cooler

~~DIN 6654 pneumatic tube - graphic symbols~~

DIN 6656 pneumatic tube - driving tubes, tube bends 90 ° and sleeves for pneumatic tube systems made of steel and stainless steel

DIN 6660 pneumatic tube - driving tubes, tube bends and sleeves for pneumatic tube systems made of plasticizer-free polyvinyl chloride (PVC-U)

DIN 6663 pneumatic tube - processing of components for pneumatic tube systems made of plastic (PVC-U), steel and stainless steel

DIN 6665 pneumatic tube - test caliber for driving tubes and tube bends

DIN 6694 bulk goods wagon with pressure emptying; Connectors and accessories; Overview

DIN 6697 bulk goods wagon with pressure emptying; Overpressure gauges with diaphragm, connection flange radially below

DIN 6698 bulk goods wagon with pressure emptying; Protective box and base with test connection for overpressure measuring device

~~DIN 6700 welding of rail vehicles and vehicle parts (6 parts)~~ , January 2008 replaced by DIN EN 15085-1… 5

DIN 6701 bonding of rail vehicles and vehicle parts

Part 2 Qualification of the user companies
Part 3 Guideline for the construction and verification of adhesive joints in rail vehicle construction
Part 4 implementation rules and quality assurance

DIN 6721 paper for data processing - 40 g / m² to 90 g / m² paper for continuous forms

Part 2: Self-copying, requirements and tests

DIN 6723 papers for data processing - 90 g / m² paper for document sorting readers

Part 1 Uncoated, uncoated; Requirements, testing
Part 2 Painted, coated, self-copying; Requirements, testing

DIN 6724 papers for data processing - 65 to 85 g / m² paper for document readers

Part 1 Uncoated, uncoated; Requirements, testing
Part 2 Painted, coated, self-copying; Requirements, testing

DIN 6730 paper, cardboard and fibrous material - terms

DIN 6735 Paper, cardboard and fibrous materials - Overview of terms; Text in German, English and French, September 2017 replaced by DIN 6730

DIN 6736 Paper and Fibers - Relevant environmental aspects and parameters for paper

DIN 6737 paper and cardboard - office cardboard - requirements, testing

DIN 6738 paper and cardboard - service life classes

DIN 6744 wallpaper base paper; Determination of the peelability and splittability of wallpaper base paper and the wallpaper made from it (wall coverings)

DIN 6763 numbering; Basic concepts

DIN 6770 Technical Product Documentation - Identification of features in technical drawings

~~DIN 6771 technical drawings~~

~~DIN 6773 heat treatment of ferrous materials - representation and details of heat-treated parts in drawings~~ , January 2010 replaced by DIN ISO 15787

~~DIN 6775 drawing tubes for ink drawing devices (Micronorm - test standard for ink pens and writing stencils )~~

~~Part 1 dimensions, marking~~ , June 1990 replaced by DIN ISO 9175 -1
~~Part 2 Requirements and testing of line widths~~ , June 1990 replaced by DIN ISO 9175-2

~~DIN 6776 technical drawings, lettering~~ , November 2000 replaced by DIN EN ISO 3098

~~Part 1 characters~~
~~Part 1 Supplement 1, auxiliary nets for font A~~
~~Part 1 Supplement 1, auxiliary nets for font B~~

DIN 6779 labeling system for technical products and technical product documentation

Part 12 buildings and technical building equipment
Part 13 chemical plants

DIN 6785 slugs on turned parts - drawing details

DIN 6789 documentation systematics - security against falsification and quality criteria for the release of digital product data

DIN 6790 technical product documentation - word information in documents

Part 1 explanations

DIN 6791 semi-tubular rivets with button head - nominal diameter 1.6 mm to 10 mm

DIN 6792 semi-tubular rivets with countersunk head - nominal diameter 1.6 mm to 10 mm

DIN 6796 spring washers for screw connections

~~DIN 6797 tooth lock washers~~ , May 2003 withdrawn without replacement

~~DIN 6798 serrated lock washers~~ , withdrawn in May 2003 without replacement

DIN 6799 Lock washers (retaining washers) for shafts

DIN 6800 dose measurement method using the probe method for photon and electron radiation

Part 1 General
Part 2 Dosimetry of high-energy photon and electron beams with ionization chambers
- Correction 1
Part 4 film dosimetry
Part 5 thermoluminescence dosimetry

DIN 6802 neutron dosimetry
- Part 4 procedure for personal dosimetry with albedo dosimeters

DIN 6809 Clinical Dosimetry

Part 1 radiation quality of photon and electron radiation

Part 2 Brachytherapy with enclosed gamma-emitting radioactive substances

Part 3 X-ray diagnostics

Part 4 Use of X-rays with tube voltages of 10 to 100 kV in radiation therapy and in soft tissue diagnostics

Part 5 Use of X-rays with tube voltages of 100 to 400 kV in radiation therapy

Part 6 Application of high-energy photon and electron radiation in percutaneous radiation therapy

DIN 6812 Medical X-ray systems up to 300 kV - rules for the design of structural radiation protection

DIN 6814 terms of radiological technology

~~Part 1 areas of application~~
Part 2 radiation physics
Part 3 dosimetry
Part 4 radioactivity
Part 5 radiation protection
Part 6 Diagnostic application of X-rays in medicine
Part 8 radiation therapy

DIN 6815 Medical X-ray systems up to 300 kV - rules for testing radiation protection after construction, repair and major changes

DIN 6818 radiation protection dosimeter

Part 1 General rules

DIN 6827 logging in the medical application of ionizing radiation

Part 1 Therapy with electron accelerators and X-ray and gamma radiation equipment
Part 2 Diagnosis and therapy with unsealed radioactive substances
Part 3 Brachytherapy with enclosed radiation sources
Part 5 Radiological report

~~DIN 6830 X-ray films for use with fluorescence intensifying foils in medical diagnostics~~

~~Part 1 Sensitometric representation of the fluorescence radiation from calcium tungstate reinforcement foils~~
~~Part 2 Determination of the sensitivity of the mean gradient and the haze~~

DIN 6834 radiation protection doors for medically used rooms

Part 1: Requirements

DIN 6836 X-ray tube; Holders for medical X-ray application devices, connection dimensions

DIN 6843 radiation protection rules for handling unsealed radioactive substances in medicine

DIN 6844 nuclear medicine companies

Part 1 Rules for the establishment and equipment of companies for the diagnostic use of unsealed radioactive substances
Part 2 Rules for setting up and equipping plants for the therapeutic use of unsealed radioactive substances
Part 3 radiation protection calculations
- Corrections

DIN 6846 Medical gamma irradiation systems

Part 2 radiation protection rules for the construction
Part 5 constancy tests of apparatus quality features

DIN 6847 Medical electron accelerator systems

Part 2 Rules for the design of structural radiation protection
Part 5 constancy tests of characteristics
- Correction 1
Part 6 Electronic image receiver (EPID) - constancy test

DIN 6848 marking of examination results in radiology

Part 1 patient orientation in imaging procedures

DIN 6850 radiation protection containers, radiation protection tables and radiation protection safes for use in nuclear medicine operations - requirements and classification

DIN 6853 Medical remote-controlled, automatically operated afterloading systems

Part 2 radiation protection rules for the construction
~~Part 3 Requirements for the radiation sources~~
Part 5 constancy test of characteristics

DIN 6854 Technetium Generators - Requirements and Operation

DIN 6855 constancy test of nuclear medicine measuring systems

Part 1 in-vivo and in-vitro measuring stations (IEC / TR 61948-1: 2001, modified)
Part 2 Single crystal gamma cameras for planar scintigraphy and for single photon emission tomography with the help of rotating measuring heads
Part 4 positron emission tomograph (PET)
Part 11 Aktivimeter (IEC / TR 61948-4: 2006, modified)

DIN 6856 Radiological observation devices and conditions

Part 1 Requirements and quality assurance measures in medical diagnostics
Part 3 viewing devices for dentistry

DIN 6857 radiation protection accessories for medical use of X-rays

Part 2 Quality inspection of protective clothing in use

DIN 6858 Quality inspection of multimodal imaging

Part 1 constancy test PET / CT

DIN 6860 film processing in radiology - storage, transport, handling and processing

DIN 6862 Identification and marking of image recordings in medical diagnostics

Part 1 Direct and Indirect Radiography
Part 2 Dissemination of X-rays and associated records in digital radiography, digital fluoroscopy and computed tomography

DIN 6867 sensitometry on film-foil systems for medical radiography

Part 3 method for determining the course of the sensitometric curve, the sensitivity and the mean gradient for mammography
Part 10 nominal values of sensitivity and mean gradient

DIN 6868 Image quality assurance in X-ray diagnostic companies

Part 1 General
Part 2 Constancy test of film processing
Part 3 Constancy test for direct radiography
Part 4 Constancy test on medical X-ray equipment for fluoroscopy
Part 5 Constancy test according to RöV on dental X-ray facilities
Part 7 Constancy test on X-ray equipment for mammography
Part 13 Constancy test according to RöV for projection radiography with digital image receiver systems
Part 14 Constancy test according to RöV on X-ray equipment for digital mammography
Part 15 Constancy test according to RöV on dental X-ray equipment for digital volume tomography
Part 56 Acceptance test on image documentation systems
Part 150 acceptance test according to RöV on medical X-ray facilities for recording and fluoroscopy
Part 151 acceptance test according to RöV on dental X-ray equipment - rules for testing the image quality after construction, repair and modification
Part 152 acceptance test according to RöV on X-ray equipment for film-foil mammography
Part 157 acceptance and constancy test according to RöV on image display systems in their environment
Part 159 Acceptance and constancy test in teleradiology according to RöV
Part 160 quality requirements for the recording of findings on non-transparent media in dental X-ray diagnostics
Part 161 acceptance test according to RöV on dental X-ray equipment for digital volume tomography
Part 162 acceptance test according to RöV on X-ray equipment for digital mammography

DIN 6870 quality management system in medical radiology

Part 1 radiation therapy
Part 2 Radiological diagnosis and intervention
Part 100 general

DIN 6871 cyclotron systems for positron emission tomography

Part 1 Requirements for structural radiation protection
Part 2 radiation protection labyrinths and wall penetrations

DIN 6873 radiation
planning systems
- Part 5 constancy tests of characteristics

DIN 6874 therapy simulators

Part 5 constancy test of characteristics

DIN 6875 Special irradiation facilities

Part 1 Percutaneous stereotactic radiation, characteristics and special test methods
Part 2 Percutaneous stereotactic irradiation - constancy tests
Part 3 Fluence-modulated radiation therapy - characteristics, test methods and rules for clinical use
Part 4 Fluence-modulated radiation therapy - constancy tests
Part 20 proton therapy - rules for the design of structural radiation protection

DIN 6876 operation of medical magnetic resonance systems

DIN 6878 Digital archiving in medical radiology

Part 1 General requirements for archiving images

DIN 6880 bright wedge steel - dimensions, permissible deviations, dimensions

DIN 6881 voltage connections with tightening; Hollow wedges, dimensions and application

DIN 6883 voltage connections with tightening; Flat wedges, dimensions and application

DIN 6884 voltage connections with tightening; Flat nose wedges, dimensions and application

DIN 6885 driver connections without tightening

Part 1 keys , grooves, tall shape
~~Part 2 tall form for machine tools, dimensions and application~~
Part 3 parallel keys, low shape, dimensions and application

DIN 6886 voltage connections with tightening; Keys, grooves, dimensions and application

DIN 6887 voltage connections with tightening; Nose wedges, grooves, dimensions and application

DIN 6888 driver connections without tightening; Woodruff springs , dimensions and application (replacement for DIN 122, 304 and partly DIN LON 522)

DIN 6889 voltage connections with tightening; Nasal Wedges, Dimensions and Applications

DIN 6892 driver connections without tightening, feather keys, calculation and design

Correction 1

DIN 6900 combination screws with standard thread

Part 5 with tension washer

DIN 6908 spring washers for combination screws

DIN 6911 offset screwdriver with tenon for screws with hexagon socket

DIN 6912 cylinder screws with hexagon socket - low head, with key guide

~~DIN 6916 washers, round, for HV screws in steel constructions~~ , June 2005 replaced by DIN EN 14399-6

DIN 6917 washers, square, wedge-shaped, for HV screws on I-profiles in steel structures

DIN 6918 washers, square, wedge-shaped for HV screws on U-profiles in steel structures

DIN 6929 screws with standard thread and thin shaft for use as a loss protection

DIN 6930 stamped parts made of steel

Part 1 Technical delivery conditions
Part 2 general tolerances

DIN 6932 design rules for stamped steel parts

DIN 6935 cold bending of flat products made of steel

Supplement 1 Factors for compensation value υ for calculating the extended length
Supplement 2 Calculated compensation values υ

DIN 7000-7999

~~DIN 7052 Breakdown of liquid mixtures by distillation and rectification~~

DIN 7079 Round, metal-fused sight glass plates for pressure loads

Part 1 For frames with a recess

DIN 7080 round sight glass plates made of borosilicate glass for pressure loads without limitation in the low temperature range

DIN 7081 Long sight glass plates made of borosilicate glass for pressure loads without limitation in the low temperature range

DIN 7150 Geometrical Product Specifications (GPS) - System for limit dimensions and fits

Part 2 limit gauges and gauges for smooth cylindrical workpieces
- Correction 1

~~DIN 7151 ISO basic tolerances for linear dimensions from 1 to 500 mm nominal dimension~~ , November 1990 replaced by DIN ISO 286-1

~~DIN 7154 dimensions of fits in the fit system unit~~ ~~bore (ø up to 500 mm)~~

~~DIN 7155 dimensions of fits in the system unit shaft (ø up to 500 mm)~~

~~DIN 7157 fit selection; Tolerance fields, dimensions, fitting tolerances~~

~~Supplementary sheet of fit selection; Selection of tolerance fields according to ISO / R 1829~~

~~DIN 7160 dimensions for external dimensions (shafts)~~ , November 1990 replaced by DIN ISO 286-2

~~DIN 7161 dimensions for internal dimensions (bores)~~ , November 1990 replaced by DIN ISO 286-2

DIN 7163 working snap gauges and test gauges for ISO fitting sizes from 1 to 500 mm nominal size; Gauge dimensions and manufacturing tolerances

DIN 7164 working plug gauges and ball gauges for ISO fitting sizes from 1 to 500 mm nominal size; Gauge dimensions and manufacturing tolerances

~~DIN 7168 general tolerances; Length and angle dimensions, shape and position, not for new constructions~~

DIN 7172 tolerances and limit dimensions for length dimensions over 3150 to 10000 mm; Basics, basic tolerances, limit dimensions

~~DIN 7182 dimensions, dimensions, tolerances and fits~~

~~Part 1 Basic Terms~~ , December 1990 replaced by DIN ISO 286-1
~~Part 3 interference fits, terms~~ , July 1988 replaced by DIN 7190

DIN 7190 interference fits - calculation bases and design rules

DIN 7200 punch

DIN 7209 glass cutter

DIN 7210 Weber pliers (replaces Erfa 7210, 7211, 7212; standard withdrawn)

DIN 7216 painter's spatulas

DIN 7226 scrapers

DIN 7235 hand saws for wood; Hacksaws, precision saws

DIN 7239 roofing hammers

~~DIN 7245 hand saws for wood - stretch saws, saw blades for frame saws~~

DIN 7250 grains

DIN 7253 floor laying trowels

DIN 7254 mason's chisel

DIN 7255 impact tools - technical delivery conditions

DIN 7256 pointed chisel

DIN 7258 hand saws for wood; Tack saws, jigsaw

DIN 7261 workshop files; Shapes, lengths, cross-sections

DIN 7262 sharpening files; Shapes, lengths, cross-sections

DIN 7263 rasps and cabinet files; Shapes, lengths, cross-sections

DIN 7264 milled files; Shapes, lengths, cross-sections

DIN 7270 screw cap for oil container

DIN 7271 screw ring for oil level indicators on oil tanks

DIN 7272 threaded connector for oil tanks

DIN 7283 key files; Shapes, lengths, cross-sections

DIN 7284 files and rasps; Technical delivery conditions

DIN 7285 files and rasps; Terms

DIN 7287 axes and hatchets made of steel; Technical delivery conditions

DIN 7294 axes

DIN 7295 ax handles

DIN 7331 hollow rivets, two-part

DIN 7332 eyelets for canvas

DIN 7333 eyelets for cardboard boxes

DIN 7338 rivets for brake and clutch linings

DIN 7339 hollow rivets, one-piece, drawn from tape

DIN 7340 tubular rivets made from tube

DIN 7341 head pins

DIN 7349 washers for screws with heavy adapter sleeves

DIN 7353 punch

DIN 7355 series hoists; Steel winches

DIN 7380 forming rollers for beading machines; Connection dimensions, designations, designs, abbreviations

DIN 7396 Building acoustics tests - Test methods for the acoustic identification of decoupling elements for solid stairs

DIN 7404 safety pins

DIN 7405 staples 24/6 for office staplers; Staple, staple stick

DIN 7406 double rivet button

DIN 7407 four-hole button

DIN 7417 mandrel wrench with internal square

DIN 7422 screwdriver bits with internal square for hexagon socket screws, hand-operated

DIN 7423 wood drill; Machine auger bits

DIN 7424 socket wrench inserts with external hexagon for hexagon screws, machine-operated

DIN 7425 wood drill; Machine auger bits for sleepers

DIN 7427 screwdriver tools - connecting parts with hexagon socket for machine-operated screwdriver bits - dimensions and design

DIN 7428 connecting parts with external hexagon and external square, for machine-operated sockets

DIN 7431 plug-in handles with hexagon socket

DIN 7441 anvil horn

DIN 7442 anvil shredder

DIN 7444 screwing tools - impact ring spanners - dimensions and design

DIN 7461 carpenter's club

DIN 7462 wooden hammers

DIN 7463 hardware components; Quarter turns and stops for padlocks

DIN 7464 box locks; enclosed

DIN 7469 protective corners for boxes

DIN 7472 safety harness

Part 2 fittings made of steel; Connection dimensions, safety requirements and testing

DIN 7473 plain bearings; Thick-walled composite plain bearings with cylindrical bore, undivided

DIN 7474 plain bearings; Thick-walled composite plain bearings with a cylindrical bore, divided

DIN 7477 plain bearings; Lubrication pockets for thick-walled composite plain bearings

DIN 7480 wood drill; Twist drill with one flute

DIN 7481 wood drill; Auger auger bits

DIN 7482 wooden handles for wood drills with eye

DIN 7483 wood drill; Forstner bits and artificial bits

DIN 7487 wood drill; Twist drill with two flutes

DIN 7489 wood drill; Disc cutter

DIN 7490 twist drill for woodworking; Formwork and installation drill bits

DIN 7500 self-tapping screws for metric ISO threads

Part 2 Guide values for hole diameters

DIN 7513 self-tapping screws - hexagon head screws, slotted screws - dimensions, requirements, tests

DIN 7516 self-tapping screws - Phillips screws - Dimensions, requirements, testing

DIN 7527 steel forgings machining allowances and permissible

Part 1 Deviations for open-die forged discs
Part 2 deviations for open-die forged perforated discs
Part 3 Deviations for seamless, open-die forged rings
Part 4 deviations for seamless open-die forged bushes
Part 5 Deviations for open-die forged, rolled and welded rings
Part 6 machining allowances and permissible deviations for open-die forged bars

DIN 7540 eye hook, quality class 5

DIN 7584 water fittings for house installation; Steel pipe grommets with external thread, flat sealing, nominal pressure 10

DIN 7585 water fittings for house installation; Hose grommets, flat sealing, nominal pressure 10

DIN 7588 water fittings for house installation; Screw connections with flat seal; Threaded connector on the one hand with internal thread, on the other hand with steel pipe, copper pipe or hose nozzle PN 10

DIN 7589 water fittings for house installation; Screw connections with flat seal; Threaded connector on the one hand with external thread, on the other hand with steel pipe, copper pipe or hose nozzle PN 10

DIN 7591 water fittings for house installation; Screw connections with flat seal for hose connection on both sides, nominal pressure 10

DIN 7592 water fittings for house installation; Copper pipe grommets, nominal pressure 10

DIN 7593 water fittings for house installation; Screw connections with flat gasket for copper pipe connection on both sides, nominal pressure 10

DIN 7601 pipe fittings with ball bushings - complete fittings and overview

DIN 7603 sealing rings

DIN 7604 screw plugs with external hexagon - light version - cylindrical thread

DIN 7631 pipe fittings with ball bushing; Connecting piece

DIN 7632 pipe fittings with ball bushing; Transitional screw-in socket

DIN 7633 pipe fittings with spherical bushing - soldered socket

DIN 7637 pipe fittings with ball bushing; Butt weld spigots

DIN 7638 pipe fittings with ball bushing; Angle connection piece

DIN 7639 pipe fittings with ball bushing; T-connector

DIN 7640 pipe fittings with ball bushing; Cross connection nozzle

DIN 7642 pipe fittings - ring sockets for soldered connections

DIN 7643 pipe fittings - Banjo bolts for a ring socket

DIN 7644 pipe fittings with ball bushing; Banjo screw connector for a ring connector

DIN 7647 pipe fittings with ball bushing - screw-in socket

DIN 7711 hard rubber; Types

DIN 7712 plates made of hard rubber

DIN 7713 round bars made of hard rubber

DIN 7714 pipes made of hard rubber

DIN 7715 rubber parts; Permissible dimensional deviations

Part 1 article made of hard rubber
Part 5 plates and plate items made of soft rubber (elastomers)
Part 40 tolerance limits for hoses (supplement to DIN EN ISO 1307)

DIN 7716 Rubber and rubber products - Requirements for storage, cleaning and maintenance

DIN 7719 Endless wide V-belts for industrial speed converters

Part 1 belts and groove profiles of the associated pulleys
Part 2 measurement of the center distance fluctuation

DIN 7721 synchronous belt drives, metric pitch

Part 1 synchronous belt
Part 2 tooth gap profile for synchronizing pulleys

DIN 7722 Endless hexagonal belts for agricultural machinery and groove profiles of the associated pulleys

~~DIN 7726 foams; Terms and classification~~

DIN 7737 Laminate Products; Vulcanized fiber, types

DIN 7738 Laminate Products; Vulcanized fiber, acceptance, test method

DIN 7742 plastic molding compounds; Cellulose ester (CA, CP, CAB) molding compounds

Part 1 classification and designation
Part 2 production of test specimens and determination of properties

DIN 7750 bottle washers made of rubber for clip and lever closures

DIN 7753 Endless wedge belts for mechanical engineering

Part 1 dimensions
Part 2 Calculation of the drives, performance values

DIN 7753 Endless narrow V-belts for the automotive industry

Part 3 Dimensions of the belts and pulley groove profiles
Part 4 fatigue test

DIN 7754 sealing caps for sweet cider bottles and balloons

DIN 7755 Shaped rubber top patches for shoe heels

Part 1 dimensions
Part 2 dimensions for nail hole template

DIN 7756 valves for vehicle tires; Valve thread, theoretical values, thread limit dimensions

DIN 7785 valves for vehicle hoses; 90 ° angle valve 33 G, with rubber foot

DIN 7786 valves for vehicle hoses; 80 ° angle valve with rotatable valve body

DIN 7787 valves for vehicle hoses; Angle valves 40.5 G, with rubber feet

DIN 7788 valves for vehicle hoses; Rubber valve 93, bendable by hand

DIN 7795 Determination of the compression set of elastomers in hot water

DIN 7798 tires for earthmoving machines, dump trucks and special vehicles on and off the road

Part 1 tires in diagonal construction; Nominal cross-section ratio> 90%
Part 2 wide-rim tires in diagonal design
Part 3 tires in radial construction; Nominal cross-section ratio> 90%
Part 4 wide-rim tires in radial design

DIN 7799 tires for road construction machines, earth-moving machines and tractors (tractor grader tires)

Part 1 normal tires in diagonal design

DIN 7800 tires for bicycles

DIN 7801 tires for light motorcycles

DIN 7803

Part 2 tires for passenger cars and delivery vehicles; Diagonal tires, super low profile tires
Part 5 passenger car tires; Radial type tires; Designation and identification

DIN 7804 tires for light commercial vehicles and their trailers (C-tires)

Part 1 tires in diagonal design

DIN 7805 tires for commercial vehicles and their trailers

Part 3 tires in radial construction; Nominal cross-section ratio> 95%
Part 4 tires in radial construction; Tubeless tires on steep shoulder rims
Part 5 center distances and free spaces for steep shoulder rims
Part 6 load capacity / speed assignment

DIN 7808 agricultural tractor steering wheel tires

DIN 7809 tires for handcarts

DIN 7810 scooter tires

DIN 7811 pneumatic tires for industrial trucks (industrial tires)

Part 1 tires with normal cross-section in diagonal design
Part 2 wide tires in diagonal design

DIN 7815 drop center rims

Part 1 for bicycles

DIN 7816 rims for motorcycles

Part 1 drop center rims with cylindrical shoulder
Part 2 drop center rims with 5 ° tapered shoulder; MT rims
Part 3 drop center rims with 5 ° tapered shoulder; Rim profile 2.50 A and 2.50 C
Part 4 Two-piece rims with split wheel disc

DIN 7817 drop center rims for motor vehicles and trailers

Part 1 rims with horn shape J, JK and K without safety shoulders
Part 2 horn shape J, JK and K; Hump versions
Part 3 Hump special designs

DIN 7818 drop center rims for motor vehicles, trailers and agricultural vehicles; Horn shapes C, D, E and F; Rim diameter designation 14 to 20

DIN 7820 tapered shoulder rims for motor vehicles and trailers - rim diameter designation 15, 20 and 24

DIN 7821 rims for handcarts

DIN 7825 rims for industrial trucks

DIN 7826 semi-drop center rims (SDC rims) for commercial vehicles and their trailers; Rim diameter designation 16, 20 and 24

DIN 7827 rims for work machines, agricultural equipment, farm vehicles, multi-purpose vehicles and trailers

DIN 7829 rims and wheels - marking

DIN 7830 rim profile gauges for drop center rims according to DIN 7816

DIN 7831

Part 1 rim profile gauges for drop center rims according to DIN 7817 Part 1 and DIN 7818
Part 2 rim profile gauges for drop center rims according to DIN 7817 part 2 and part 3

DIN 7834 rim profile gauges for wide rims according to DIN 7823

DIN 7837 rim measuring tapes for drop center rims for two-wheeled vehicles

Part 2 rim measuring tapes for drop center rims for small motorcycles, motorcycles and sidecars

DIN 7838 rim measuring tapes

Part 1 flat measuring tapes for rims with sloping shoulders fixed on both sides

DIN 7839 rim circumference gauges; Ball gauges and washer gauges

DIN 7840 rim profile gauges for rims according to DIN 7824

DIN 7841 rim profile gauges for rims according to DIN 7825

DIN 7842 rim profile gauges for handcart rims according to DIN 7821

DIN 7843 rim profile gauges for semi-drop center rims (SDC rims) according to DIN 7826

DIN 7844 rim profile gauges for rims according to DIN 7827

DIN 7845 solid rubber tires

Part 1 dimensions and load capacities
Part 2 design guidelines for conical foot designs

DIN 7848 rims for earthmoving machines and special vehicles

Part 1 tapered shoulder rims with removable horn on both sides
Part 2 tapered shoulder rims with one-sided removable horn
Part 3 drop center rims

DIN 7852 solid rubber tires for multi-part pneumatic tire rims

DIN 7863 elastomer sealing profiles for windows and facades - technical delivery conditions

Part 1 Non-cellular elastomer sealing profiles in window and facade construction
Part 2 Cellular elastomer sealing profiles in window and facade construction

DIN 7864 elastomer sheets for waterproofing

Part 1 requirements, testing

DIN 7865 Elastomer joint tapes for sealing joints in concrete

Part 1 shapes and dimensions
Part 2 material requirements and testing
Part 3 area of application

DIN 7867 V-ribbed belts and pulleys

DIN 7868 rubber and plastic coated rollers

Part 1 hardness specifications
Part 2 surface features
Part 3 dimensional, running and shape tolerances

DIN 7876 diving accessories - swimming fins - dimensions, requirements and testing

DIN 7877 diving accessories - diving goggles - safety requirements and testing

DIN 7878 diving accessories - snorkels - dimensions, requirements, testing

DIN 7881 winter sports equipment - safety bindings for alpine piste skiing - setting scale for the trigger values

DIN 7892 gymnastics and playing field equipment - Electromotive lifting devices - Safety requirements and testing

DIN 7893 playground equipment - Fistball equipment - Dimensions, requirements and test methods

~~DIN 7898 devices for outdoor sports facilities and halls - table tennis~~

~~Part 1 Dimensions, requirements and test methods for tables~~ , March 2005 replaced by DIN EN 14468-1

~~Part 2 table tennis~~ tables ~~, net sets, dimensions, requirements, testing~~ , June 2005 replaced by DIN EN 14468-2

DIN 7899 playground equipment - basketball equipment - requirements and test methods including DIN EN 1270

DIN 7900 playground equipment - football goals - construction dimensions

DIN 7901 gymnastics equipment - bars with inlay mat - requirements and test methods including DIN EN 914

~~Part 1 bars for school races~~
~~Part 2 bars for competitions~~

~~DIN 7902 gymnastics equipment; Gymnastic horses~~

DIN 7903 gymnastics equipment - stretching equipment - retractable bar

~~Part 1 bar~~
~~Part 2 Versenkreck~~
~~Part 3 step bar~~
~~Part 4 tension bar for competitions~~

~~DIN 7904 gymnastics equipment; Gym stands, dimensions, requirements, testing~~

~~DIN 7905 gymnastics equipment; Ring devices~~

~~Part 1 swing rings with adjustment devices~~

DIN 7906 Gymnastics equipment - Balance beam - Requirements and test methods; including DIN EN 12432

DIN 7908 gymnastics equipment - vaulting boxes - construction, execution, safety requirements and test methods including DIN EN 916

DIN 7909 gymnastics and gymnastics equipment - gymnastics bench - dimensions, requirements, testing

DIN 7910 Gymnastics equipment - Wall bars - Requirements and test methods; including DIN EN 12346

DIN 7911 gymnastics and gymnastics equipment - climbing equipment

Part 1 lattice ladders; Requirements and test methods; including DIN EN 12346
Part 2 climbing ropes, dimensions, safety requirements and test methods
Part 3 climbing poles, dimensions, safety requirements and test methods

~~DIN 7912 gymnastics equipment; Gymnastics equipment~~

~~Part 1 gymnastics clubs~~
~~Part 2 exercise hoops~~

~~DIN 7913 gymnastics equipment; Procedure for testing mats and gymnastics floors~~

~~Part 1 testing of hardness and damping~~
~~Part 2 testing of slip resistance~~

~~DIN 7914 gymnastics equipment; Mats~~

~~Part 1 gym mat (landing mat)~~
~~Part 2 soft floor mats; Dimensions, safety requirements and testing~~

~~DIN 7915 gymnastics equipment~~

~~Part 1 stepping stone for school races~~

~~DIN 7916 gymnastics and gymnastics equipment; Floor exercise areas~~

~~Part 1 floor exercise mat~~

DIN 7917 changing benches for sports facilities - requirements, testing

~~DIN 7918 gymnastics equipment; Trampolines~~

~~Part 1 Jump trampoline, requirements~~
~~Part 2 5.20 m × 3.05 m, dimensions, requirements and testing~~

~~DIN 7926 children's play equipment~~

~~Part 1 Terms, safety requirements, testing~~
~~Part 2 swings, safety requirements, testing~~
~~Part 3 slides, safety requirements, testing~~
~~Part 4 cable cars, dimensions, safety requirements, testing~~
~~Part 5 carousels, terms, safety requirements, testing~~

DIN 7939 Swimming equipment - Separating rope systems in swimming pools - Requirements and testing

DIN 7952 sheet metal fittings with thread

Part 1 dimensions
Part 2 pilot hole diameter
Part 3 manufacturing process
Part 4 Dimensions for the tools and their design

DIN 7954 hardware components; Rolled hinges

DIN 7955 hardware components; Beaten hinges

DIN 7956 hardware components; Rolled bar hinge

DIN 7957 hardware components; Rolled table tape

DIN 7958 hardware components; Beaten table tape

DIN 7965 screw-in nuts (screw dowels)

DIN 7968 hexagon fitting screws with hexagon nut for steel structures

DIN 7969 countersunk screws with slot with hexagon nut for steel structures

~~DIN 7971 cylinder tapping screws, with slot~~ , November 1995 replaced by DIN ISO 1481

DIN 7975 sheet metal screw connections; Application, guide values for core hole diameters

~~DIN 7978 taper pins, with internal thread~~ , replaced by DIN EN 28736 in October 1992

DIN 7984 hexagon socket head cap screws with low head

~~DIN 7985 pan head screws with cross recess~~ , November 1994 replaced by DIN EN ISO 7045

DIN 7989 washers for steel structures

Part 1 product class C
Part 2 product class A

DIN 7990 hexagon bolts with hexagon nut for steel structures

~~DIN 7991 countersunk screws with hexagon socket~~ , March 1998 replaced by DIN EN ISO 10642

DIN 7992 T-head bolts with large head

~~DIN 7993 round wire snap rings and snap ring grooves, for shafts and bores~~

DIN 7995 raised countersunk wood screws with cross recess

DIN 7996 round head wood screws with cross recess

DIN 7997 countersunk wood screws with cross recess

DIN 7998 thread and screw ends for wood screws

DIN 8000-9999

DIN 8000 determinants and errors on hob cutters for spur gears with involute teeth; Basic concepts

DIN 8002 machine tools for metal; Hobs for spur gears with transverse or longitudinal groove, module 1 to 20

DIN 8010 carbide inserts, for drills, point angle 115 °, for high cutting forces

DIN 8011 carbide inserts for reamers, countersinks and end mills

DIN 8012 inserts made of hard metal for center points

DIN 8013 carbide inserts, for drills, point angle 85 °, for small cutting forces

DIN 8022 shell-type drill bit with carbide inserts

DIN 8024 tool holder for internal turning, with parallel shank, for indexable inserts - structure of the designation

DIN 8025 tool holder for internal turning, with straight shank, for indexable inserts

Part 1 shapes, dimensions, correction calculations
Part 2 form F
Part 3 form K
Part 4 form L
Part 5 form U
Part 6 form Q

DIN 8026 slot milling cutter with morse taper shank, with carbide inserts

DIN 8027 slot milling cutter with straight shank, with cutting plates made of hard metal

DIN 8030 milling heads for indexable inserts

Part 1 dimensions

DIN 8031 disc milling cutters for indexable inserts; Dimensions

DIN 8032 burrs made of hard metal; Concept, terms, overview

DIN 8033 burrs made of hard metal

Part 1 Technical delivery conditions
Part 2 cylinder burrs
Part 3 cylindrical burrs
Part 4 pointed cone burrs
Part 5 round cone burrs
Part 6 countersunk burrs
Part 7 angle burrs
Part 8 ball burrs
Part 9 pointed burrs
Part 10 round arch burrs
Part 12 teardrop burrs

DIN 8037 twist drill with straight shank, with cutting plate made of hard metal, for metal

DIN 8038 twist drill with straight shank, with cutting plate made of hard metal, for plastic (thermoset)

DIN 8041 twist drill with Morse taper, with cutting plate made of hard metal, for metal

DIN 8043 borer with carbide inserts

DIN 8044 end mill with straight shank, with carbide inserts

DIN 8045 end mill with morse taper shank, with carbide inserts

DIN 8047 disc milling cutter, cutting edges made of hard metal

DIN 8048 disc milling cutter with exchangeable knives, cutting edges made of hard metal

DIN 8050 machine reamers with straight shank with carbide inserts, with short cutting part

DIN 8051 machine reamers with Morse taper shank, with carbide inserts, with short cutting part

DIN 8054 slip-on reamers with carbide inserts

DIN 8056 shell end mill with transverse groove, with carbide inserts

DIN 8061 Pipes made of plasticizer-free polyvinyl chloride (PVC-U) - General quality requirements, testing; Text in German and English

DIN 8062 pipes made of plasticizer-free polyvinyl chloride (PVC-U) - dimensions

DIN 8074 pipes made of polyethylene (PE) - PE 80, PE 100 - dimensions; Text in German and English

DIN 8075 Pipes made of polyethylene (PE) - PE 80, PE 100 - General quality requirements, tests; Text in German and English

DIN 8076 Pressure pipelines made of thermoplastics - Clamp connectors made of metals and plastics for pipes made of polyethylene (PE) - General quality requirements and testing; Text in German and English

DIN 8077 pipes made of polypropylene (PP) - PP-H, PP-B, PP-R, PP-RCT - dimensions

DIN 8078 pipes made of polypropylene (PP) - PP-H, PP-B, PP-R, PP-RCT - General quality requirements, testing

DIN 8079 pipes made of chlorinated polyvinyl chloride (PVC-C) - dimensions

DIN 8080 pipes made of chlorinated polyvinyl chloride (PVC-C) - general quality requirements, testing

Supplement 1 PVC-C 250 - General quality requirements, testing; Chemical resistance

DIN 8082 machine tools for woodworking; Main dimensions, cutting direction, position of the tool

DIN 8083 circular saw blades for wood with cutting plates made of hard metal; Dimensions, number of teeth

DIN 8089 automatic reamers

DIN 8090 automatic reamers with carbide inserts

DIN 8093 carbide machine reamers with straight shank

Part 1 reamers with cutting inserts
Part 2 NC reamers

DIN 8094 machine reamers with morse taper shank, with carbide inserts, with long cutting part

DIN 8096 end mill type A for indexable inserts

Part 1 with straight shank; Dimensions
Part 2 with morse taper shank; Dimensions

DIN 8099 hard metal mandrels

Part 1 with soldered-on hard metal ring
Part 2 with screwed on hard metal ring

DIN 8119 bridges for road vehicle scales; Load assumptions

Part 1 weighbridges; Bridge sizes, maximum load up to 20 t
Part 2 weighbridges; Road vehicle scales - bridge sizes, maximum load up to 60 t
Part 3 weighbridges; Track scales, combined track and road vehicle scales - bridge sizes, maximum load up to 120 t
Part 4 weighbridges; Load assumptions for floor scales and scales that can be lowered into the floor
Part 6 weighbridges; Load assumptions for track scales and combined track and road vehicle scales

DIN 8125 Graphic symbols for weighing technology

Part 1 basics, overview

DIN 8127 weights of the accuracy classes E1, E2, F1, F2, M1, M1? 2, M2, M2? 3, and M3 - Metrological and technical requirements (OIML R 111-1: 2004)

DIN 8128 Automatic scales for individual weighing

Part 1 Metrological and technical requirements - testing (OIML R 51-1: 2006 + Erratum 2010)

DIN 8129 Automatic Track Scales (SGW) - Metrological and technical requirements, testing (OIML R 106-1: 1997)

DIN 8130 Automatic scales for discontinuous totalizing (totalizing container scales) (SWT) - Part 1: Metrological and technical requirements - testing (OIML R 107-1: 2007)

DIN 8131 Automatic weighing scales - Metrological and technical requirements - Tests (OIML R 61-1: 2004)

DIN 8132 Automatic scales for continuous totalizing - Conveyor belt scales (FBW) - Metrological and technical requirements, testing (OIML R 50-1: 1997)

DIN 8140 thread inserts made of wire for metric ISO threads

Part 1 dimensions, technical delivery conditions
Part 2 holding threads for thread inserts, thread tolerances
Part 3 gauges and gauge dimensions

DIN 8141 metric ISO thread; Regular and fine threads for tight fit in aluminum cast alloys; Nominal thread diameter from 5 mm to 16 mm

Part 1 nominal dimensions, tolerances and limit dimensions
Part 2 gauges for internal and external threads

DIN 8150 gall chains

DIN 8156 drawbench chains without sockets

DIN 8157 drawbench chains with bushes

DIN 8164 bush chains

DIN 8165 conveyor chains with solid pins

Part 1 type FV; Single-strand chain, two-strand chain; Not for new designs
Part 2 type FV; Fastening straps, connection dimensions; Not for new designs
Part 3 type FVT; Carrying chains with raised plates; Not for new designs

DIN 8166 rollers for conveyor chains with solid bolts; Type FV and FVT; Not for new designs

~~DIN 8167 conveyor chains with solid pins~~

~~Part 1 ISO type M, single-strand chain, two-strand chain~~
~~Part 2 ISO type M, mounting brackets, connection dimensions~~
~~Part 3 ISO type MT; Carrying chains with raised plates~~

DIN 8175 conveyor chains; Bush conveyor chains, heavy duty

DIN 8176 conveyor chains; Bush conveyor chains for chain conveyors

DIN 8182 roller chains with cranked links (rotary chains)

DIN 8184 roller chains for circulating elevators

DIN 8185 roller chains for support chain lifts

~~DIN 8187 roller chains, European type~~

~~Part 1 single, double, triple roller chains~~
~~Part 2 single roller chains with fastening straps, connection dimensions~~
~~Part 3 simple roller chains with extended bolts, connection dimensions~~

~~DIN 8188 roller chains, American type~~

~~Part 1 single, double and triple roller chains~~
~~Part 2 single roller chains with fastening straps, connection dimensions~~
~~Part 3 simple roller chains with extended bolts, connection dimensions~~

DIN 8190 inverted tooth chains with rocker joint and 30 ° pressure angle

DIN 8191 toothing of the sprockets for inverted tooth chains according to DIN 8190 - profile dimensions

Correction 1

DIN 8192 chain wheels for roller chains according to DIN 8187; Dimensions

Correction 1

DIN 8197 steel link chains; Reference profiles of rolling tools for sprockets for roller chains

DIN 8198 profiles of tooth space milling cutters for sprockets for roller chains

DIN 8221 plain bearings - bushes for plain bearings according to DIN 502, DIN 503 and DIN 504

DIN 8230 small watches; Naming of individual parts

DIN 8231 small watches; Names of individual parts for additional equipment

DIN 8234 handwork heights for small watches; Nominal dimensions

DIN 8235 classification and structure of timing devices

Part 1 types of watches

DIN 8236 Timing terms

Part 1 ad, corridor
Part 2 frequency, period
Part 3 coefficients of the gait
Part 4 test positions for watches
Part 5 Technical and commercial terms

DIN 8237 gold plating for watch cases; Requirements, testing and labeling

DIN 8240 small watches

Part 3 sizes and main dimensions of moldings
Part 4 control shaft position for round works and shaped works
Part 5 holes for dial feet in the work plate

DIN 8242 dials for small watches

Part 3 scope of testing for acceptance

DIN 8243 cheese head screws with slot, for precision engineering, M 0.3 to M 1.4

DIN 8245 countersunk screws with slot, for precision engineering, M 0.4 to M 1.4

DIN 8249 hands for small watches

Part 1 nominal dimensions
Part 2 limit dimensions for pointer bores and pointer shafts
Part 3 combinations of holes for pointer sets

DIN 8253 round watch glasses for small watches; Mineral glasses

Part 4 I-seals, dimensions

DIN 8254 shock protection for small watches; Main dimensions, fits

DIN 8255 spiral spring rollers for watches

Part 1 slotted, round

DIN 8257 jewels of precision engineering

Part 1 perforated stones for clocks, flat
Part 3 perforated stones for clocks, plane-parallel

DIN 8260 control shafts (winding shafts) for small watches; Main dimensions

DIN 8261 jewels for precision engineering; Conical jewels

~~DIN 8263 jewels for precision engineering; Cap stones for devices, flat~~

DIN 8265 case for small watches

Part 1 dial cutout, dial cover

DIN 8270 pointer for large clocks

Part 1 connection dimensions, fits, dimensional combinations
Part 2 lengths

DIN 8272 center screws for clocks

DIN 8273 center punch for watches

Part 2 without a head

DIN 8274 jewels for precision engineering; Dome stones for electricity meters

DIN 8276 round glass cover for clocks

Part 2 connection dimensions for glass cover with dial

DIN 8279 bushings for watches

Part 1 flat
Part 2 cambered

DIN 8289 bracelets for watches; Connection dimensions

DIN 8293 balance shafts for watches

Part 2 Simple balance waves

DIN 8294 balance shafts for large clocks; Grain waves

DIN 8297 crowns for wristwatches

DIN 8300 drives for drum and circular chart recorders; Designation, requirements, labeling

DIN 8301 case for large clocks; Scope of testing for acceptance

DIN 8304 spiral springs for clocks; Identification numbers

DIN 8305 clock stones; Terms, types

DIN 8306 diving watches; Safety requirements and testing

DIN 8308 shock resistance for small watches; Concept, requirements, testing

DIN 8309 Antimagnetic properties of small watches; Concept, requirements, testing

DIN 8310 water resistance of small watches; Concept, requirements, testing

DIN 8311 timing machines for watch technology; Requirement, test

DIN 8312 Technical requirements and testing for small watches and watch movements

Part 1 small watches with pallet lever escapement
Part 2 small watches with electrical energy source, frequency of the oscillation system <= 1000 Hz
Part 3 small watches with pin lever escapement

DIN 8313

Part 1 Technical requirements and testing for large clocks and large clockworks with their own electrical energy source; Frequency of the oscillation system <= 1000 Hz
Part 2 delivery conditions for loose works

DIN 8318 Radioactive luminous colors for timing devices; Concept, requirements, testing

DIN 8319 chronometer

Part 1 wrist chronometer with a frequency of the oscillation system <= 1000 Hz, concept, requirements, test
Part 2 wrist chronometer with piezoelectric oscillation system, terms, requirements, testing

DIN 8324 scale setting rings for small watches; Dimensions and terms

DIN 8325 quartz clocks

Part 1 requirements, testing, labeling
Part 2 alarm clock; Requirements, testing

DIN 8326 quartz small watches

Part 1 requirements, testing, labeling

DIN 8330 time measurement technology - pilot's watches

Part 1 requirements and tests
Part 2 conformity assessment

DIN 8349 files and rasps; Hit numbers

DIN 8350 scraper

DIN 8374 multi- phase step drill with parallel shank for through holes and countersinks for countersunk screws

DIN 8375 multi-land step drill with Morse taper shank for through holes and countersinks for countersunk screws

Correction 1

DIN 8376 multi-phase step drill with parallel shank for through holes and countersinks for cylinder screws

DIN 8377 multi-phase step drill with Morse taper shank for through holes and countersinks for cheese head screws

DIN 8378 multi-land step drill with parallel shank for core holes and countersinks

DIN 8379 multi-phase step drill with Morse taper shank for core holes and countersinks

DIN 8416 dust extractors for commercial use - safety requirements and testing

DIN 8452 industrial trucks; Slewing rings without central pivot, for handcarts and trailers

DIN 8454 industrial trucks; Drawbars for trailers, main dimensions

DIN 8457 industrial trucks; Platforms for handcarts and trailers, main dimensions

DIN 8471 garden tools - Non-motorized hand tools for soil cultivation - Properties, requirements and tests

DIN 8472 shopping trolleys

Part 1 Requirements and testing for shopping trolleys with a loading platform with or without a child seat
Part 2 Requirements and testing for shopping trolleys with loading platform with or without a child seat, suitable for use on passenger moving walks

~~DIN 8513 hard~~ ~~solders~~ , replaced by DIN EN ISO 17672

DIN 8514 solderability

~~DIN 8516 soft solders with flux cores based on resin; Composition, technical delivery conditions, testing~~ , November 1998 replaced by DIN EN ISO 12224-1

DIN 8519 projection for projection welding of steel sheets - long and ring projections

DIN 8521 safety devices against gas backflow for the use of gases from the public gas supply of air and oxygen up to a permissible operating pressure of 0.1 bar, not flame-retardant

Part 2 Safety requirements, testing

DIN 8522 manufacturing process of autogenous technology - overview

DIN 8526 Testing of soft soldered connections; Gap soldered connections, shear test, creep shear test

DIN 8531 pneumatic tools; Prepared rivet rivets

DIN 8530 pneumatic tools; Push-in ends and guide bushes for riveting and chisel hammers

DIN 8532 pneumatic tools; Insert chisel

DIN 8533 pneumatic tools; Pad feet, cones on piston rods

DIN 8534 pneumatic tools; Sieves, sieve nipples

DIN 8535 pneumatic tools; Threaded nozzles

DIN 8536 pneumatic tools; Transition grommets

DIN 8537 pneumatic tools; Conical nozzles, union nuts, connecting nipples

DIN 8541 hoses for welding, cutting and allied processes

Part 2 hoses with sheathing for fuel gases, oxygen and other non-combustible gases
Part 3 oxygen hoses with and without jackets for special requirements; Safety requirements and tests

DIN 8552 Weld seam preparation - Joint shapes on copper and copper alloys

Part 3 gas fusion welding and inert gas welding

DIN 8576 machine tools for metal; Segment saw blades for cold circular saws

DIN 8580 manufacturing processes - terms, classification

DIN 8582 Manufacturing process forming - classification; Subdivision, terms, alphabetical overview

DIN 8583 manufacturing process pressure forming

Part 1 General; Classification, subdivision, terms
Part 2 rollers; Classification, subdivision, terms
Part 3 free forms; Classification, subdivision, terms
Part 4 die molds; Classification, subdivision, terms
Part 5 impressions; Classification, subdivision, terms
Part 6 push through; Classification, subdivision, terms

DIN 8584 manufacturing process tensile compression forming

Part 1 General; Classification, subdivision, terms
Part 2 pull through; Classification, subdivision, terms
Part 3 deep drawing; Classification, subdivision, terms
Part 4 pressing; Classification, subdivision, terms
Part 5 collar pulling; Classification, subdivision, terms
Part 6 kinked bellies; Classification, subdivision, terms
Part 7 hydrofluoric wide upsetting; Classification, subdivision, terms

DIN 8585 manufacturing process tensile forming

Part 1 General; Classification, subdivision, terms
Part 2 lengths; Classification, subdivision, terms
Part 3 widths; Classification, subdivision, terms
Part 4 depths; Classification, subdivision, terms

DIN 8586 manufacturing process bending forming - classification, subdivision, terms

DIN 8587 manufacturing process shear forming - classification, subdivision, terms

DIN 8588 manufacturing process cutting - classification, subdivision, terms

DIN 8589 machining process

Part 0 General; Classification, subdivision, terms
Part 1 turning; Classification, subdivision, terms
Part 2 drilling, countersinking, reaming; Classification, subdivision, terms
Part 3 milling; Classification, subdivision, terms
Part 4 planing, slotting; Classification, subdivision, terms
Part 5 rooms; Classification, subdivision, terms
Part 6 saws; Classification, subdivision, terms
Part 7 files, rasps; Classification, subdivision, terms
Part 8 brush chips; Classification, subdivision, terms
Part 9 scraping, chiselling; Classification, subdivision, terms
Part 11 grinding with rotating tools; Classification, subdivision, terms
Part 12 belt loops; Classification, subdivision, terms
Part 13 lifting loops; Classification, subdivision, terms
Part 14 honing; Classification, subdivision, terms
Part 15 lapping; Classification, subdivision, terms
Part 17 sliding chips; Classification, subdivision, terms

DIN 8590 manufacturing process ablation - classification, subdivision, terms

Correction 1

DIN 8591 manufacturing process dismantling - classification, subdivision, terms

DIN 8592 manufacturing process cleaning - classification, subdivision, terms

DIN 8593 manufacturing process joining

Part 0 General; Classification, subdivision, terms
Part 1 assembling; Classification, subdivision, terms
Part 2 filling; Classification, subdivision, terms
Part 3 pressing, pressing in; Classification, subdivision, terms
Part 4 Joining by archetype; Classification, subdivision, terms
Part 5 Joining by forming; Classification, subdivision, terms
Part 6 joining by welding; Classification, subdivision, terms
Part 7 joining by soldering; Classification, subdivision, terms
Part 8 gluing; Classification, subdivision, terms

DIN 8605 machine tools; Lathes with increased accuracy, swing diameter up to 500 mm, turning length up to 1500 mm, acceptance conditions

DIN 8606 machine tools; Lathes with normal accuracy, swing diameter up to 800 mm, acceptance conditions

DIN 8607 machine tools; Lathes with normal accuracy, swing diameter over 800 to 1600 mm, acceptance conditions

~~DIN 8609 machine tools; Vertical lathes, acceptance conditions~~

~~Part 1 General introduction~~
~~Part 2 single column vertical lathes, acceptance conditions~~
~~Part 3 two-column vertical lathes, acceptance conditions~~

~~DIN 8610 machine tools; Revolver lathes, hand-operated, acceptance conditions~~ , withdrawn without replacement
~~DIN 8611 machine tools; Horizontal automatic lathes~~
- ~~Part 1 single-spindle, acceptance conditions~~
- ~~Part 2 front operated, acceptance conditions~~
- ~~Part 3 Swiss-type automatic lathes, acceptance conditions~~
~~DIN 8615 machine tools; Milling machines~~
- ~~Part 1 with horizontal spindle and height-adjustable console, acceptance conditions~~ , withdrawn without replacement
- ~~Part 2 with vertical spindle and height-adjustable console, acceptance conditions~~ , withdrawn without replacement
- ~~Part 3 with horizontal spindle and fixed table, acceptance conditions~~
- ~~Part 4 with vertical spindle and fixed table, acceptance conditions~~
~~DIN 8620 machine tools; Horizontal drilling and milling machines with table and fixed stand,~~
- ~~Part 3 turntables, acceptance conditions~~
~~DIN 8625 machine tools; Radial drilling machines with movable arm~~
- ~~Part 1 acceptance conditions~~
~~DIN 8626 machine tools; Vertical drilling machines~~
- ~~Part 1 upright drilling machines, acceptance conditions~~
- ~~Part 2 pillar drilling machines, acceptance conditions~~
DIN 8630 machine tools; External cylindrical grinding machines with movable workpiece table; Acceptance conditions
DIN 8632 machine tools
- Part 1 Surface grinding machines with horizontal grinding spindle and movable rectangular table; Acceptance conditions
- Part 2 surface grinding machines with horizontal grinding spindle, with rotary table, acceptance conditions
- Part 4 surface grinding machines, two-column surface grinding machines, guideway grinding machines, acceptance conditions
~~DIN 8634 machine tools; Centerless external cylindrical grinding machines; Acceptance conditions~~
DIN 8650 machine tools; Mechanical single column presses; Acceptance conditions
DIN 8651 machine tools; Mechanical two-column presses; Acceptance conditions
~~DIN 8659 machine tools; Machine tool lubrication~~
- ~~Part 1 lubrication instructions~~
- ~~Part 2 Selection of lubricants for cutting machine tools~~
DIN 8650 machine tools; Mechanical single column presses; Acceptance conditions
DIN 8651 machine tools; Mechanical two-column presses; Acceptance conditions
DIN 8665 machine tools; Vertical broaching machines; Acceptance conditions
DIN 8666 machine tools; Horizontal external broaching machines; Acceptance conditions
DIN 8667 machine tools; Internal vertical broaching machines; Acceptance conditions
DIN 8668 machine tools; Internal horizontal broaching machines; Acceptance conditions
DIN 8743 packaging machines and packaging systems - key figures for characterizing the operating behavior and conditions for their determination in the context of an acceptance run
~~DIN 8757 millstones, running horizontally~~ ; Issue August 1948, standard withdrawn
DIN 8766 ovens - limit values for exhaust gas losses
DIN 8777 brewhouse systems in breweries - minimum information
DIN 8782 Beverage filling technology; Terms for filling systems and individual units
~~DIN 8783 beverage filling technology; Investigations on filling systems~~
DIN 8784 beverage filling technology; Minimum information and order-related information
DIN 8806 Narrow band saw blades for wood
- Part 1 dimensions
DIN 8809 circular saw blades for wood, made of tool steel
DIN 8816 tool holder with thread for woodworking machines
- Part 1 tool shafts
DIN 8901 refrigeration systems and heat pumps - protection of soil, groundwater and surface water - safety and environmental requirements and testing
DIN 8902 Round sight glass plates made of soda-lime glass for pressure loads without limitation in the low temperature range
DIN 8903 Long sight glass plates made of soda-lime glass for pressure loads without limitation in the low temperature range
DIN 8905 pipes for refrigeration systems with hermetic and semi-hermetic compressors
- Part 1 outside diameter up to 54 mm; Technical delivery conditions
- Part 3 Additional technical delivery conditions for capillary throttle tubes
DIN 8906 refrigeration technology; Solderless tube fittings with flared tube; PN 40
DIN 8912 refrigeration technology; Union nuts, plugs for solderless pipe screw connections with flared pipe, PN 40
DIN 8914 refrigeration technology; Sealing rings, sealing caps for solderless pipe screw connections with flared pipe 90 °, PN 40
DIN 8915 Mobile cooling equipment - Safety requirements and testing
~~DIN 8927 Open compressors for refrigeration machines; Standard conditions for performance data, testing, information in data sheets and on nameplates~~
DIN 8929 connections for hermetic motor compressors for household refrigerators and freezers
DIN 8930 refrigeration systems and heat pumps - terminology
- Part 5 contracting
DIN 8941 Formula symbols, units and indices for refrigeration technology
DIN 8942 built-in refrigeration set - definitions, testing, marking
~~DIN 8948 desiccants for drying refrigerants - test~~
DIN 8949 filter driers for refrigerants - test
DIN 8956 Commercial devices for deep freezing food; Terms, requirements, tests
DIN 8958 Testing of cooling systems for thermally insulated means of transport
- ~~Part 1 transport refrigeration machines with fan air cooler~~
- Part 2 Transport cooling device with eutectic storage elements, dry ice and cryogenic liquid gas
DIN 8959 Thermally insulated means of transport for food - Requirements and testing
- Correction 1
DIN 8960 refrigerants - requirements and abbreviations
~~DIN 8964 circuit parts for refrigeration systems~~
- ~~Part 1 exams~~
- ~~Part 2 Permanently closed systems; conditions~~
- ~~Part 3 Closed systems; conditions~~
DIN 8965 Camping refrigerators; Terms, requirements, tests
DIN 8967 baking trays, ovens, refrigerators and freezers for bakeries; Main dimensions

* DIN 8971 single-stage condensing units for refrigeration machines; Standard conditions for performance data; Exam; Information in data sheets and on nameplates * DIN 8973 motor compressors for refrigeration machines; Standard conditions for performance data; Exam; Information in data sheets and on nameplates

DIN 8974 continuous switching test for hermetic motor compressors in refrigeration systems; Test conditions
~~DIN 8975 refrigeration systems - Safety principles for the design of equipment and installation~~
- ~~Part 1 interpretation~~
DIN 8976 performance test of compressor refrigeration systems
DIN 8978 wear test of refrigerant compressors
DIN 8979 high temperature test of motor compressors in refrigeration systems
DIN 8980 heat recovery from freshly milked milk using container cooling systems; Terms, requirements, testing
DIN 8985 surface tests on ready-to-connect refrigerators and freezers
DIN 8986 cold rooms - structural safety requirements
DIN 8991 wing mechanism; Name of the parts
DIN 8992 piano mechanics; Name of the parts
DIN 8993 wing mechanics; Dimensions
DIN 8994 piano mechanics; Dimensions
DIN 8995 keyboard for pianos and grand pianos; Designations
DIN 8996 keyboard for pianos and grand pianos; Dimensions
DIN 9003 aerospace; Bending of metal sheets, plates and strips made of steel and high-temperature alloys
- Part 1 bending radius, construction guidelines
DIN 9003 Aerospace - Bending of sheets and strips made of light metals
- Part 3 bending radius, construction instructions
- Part 5 dimensions, tolerances, compensation values
DIN 9003 aerospace; Bending of sheet metal and strips
- Part 6 drill holes, corner formations
DIN 9004 aerospace; Bending radius for pipes; Guide values for cold forming
DIN 9015 aerospace
- Part 1 ISO fit selection for cell construction (except for roller bearing installation)
- Part 2 ISO fit selection for engine construction (except for roller bearing installation)
DIN 9020 aerospace; Mass split for aircraft heavier than air
- Part 1 main mass groups and mass terms; Overview
- Part 2 main groups and terms of mass; Definitions
- Part 3 group crowd statement
  - Supplement 1 list of group dimensions, abridged version
- Part 4 individual dimensions
- Part 5 dimensions and construction information
DIN 9066 aerospace; Electrical outboard connection, circuit diagrams
DIN 9088 Aerospace - Storage times of products made of elastomers
DIN 9118 aerospace
- Part 1 pilot and rivet holes
DIN 9119 aerospace; Rivets
- Part 2 pitches and row spacing
DIN 9122 aerospace; Soft foam, sheets of asbestos (chrysotile), dimensions
DIN 9300 aerospace; Terms, sizes and symbols of flight mechanics
- Part 1 Movement of the aircraft in relation to the air; ISO 1151-1: 1988 modified
- Part 2 movements of the aircraft and the atmosphere relative to the earth; ISO 1151-2: 1985 (status 1987) modified
- ~~Part 3 Derivatives of forces, moments and their coefficients~~
- ~~Part 5 sizes and measurements~~
- Part 6 geometry of the aircraft; ISO 1151-6: 1982 (status 1984) modified
- ~~Part 7 flight operating points and flight areas~~
DIN 9370 aerospace; Tube; Classification according to use; Printing terms, calculation and design criteria
DIN 9430 aerospace; Sampling of semi-finished products made of light metals
- Part 1 wrought aluminum alloys, titanium and titanium alloys; General
- Part 2 wrought aluminum alloys
- Part 3 titanium and titanium alloys
DIN 9462 aerospace; Hose lines; Overview
DIN 9676 agricultural tractor; Trailer rail for three-point attachment
DIN 9680 agricultural machinery and tractors; Electrical power transmission; Dimensions, requirements
DIN 9711 extruded magnesium profiles
- Part 1 Technical delivery conditions
- Part 2 design
- Part 3 Permissible Deviations
DIN 9715 semi-finished products made of wrought magnesium alloys; properties
DIN 9761 office and data technology; Paper guides for printers; Dimensions, control unit
DIN 9771 papers for data processing - continuous forms - dimensions
DIN 9781 office and data technology; Identification cards made of plastic or plastic-laminated material
- Part 10 requirements for authenticity features
DIN 9784 office and data technology - printer
- Part 1 Terms and classification
DIN 9797 food machines; Trams and receptacles for trams; Dimensions, designation
DIN 9798 food machines; Sausage filling machines, filling tubes and filling tube connections
DIN 9801 food processing machines - knife pins for grinders - Unger system, sizes R70 to X400
DIN 9802 meat processing machines; Housing head bore for meat mincers, sizes 70 to 300
DIN 9803 meat processing machines; Knives for meat grinders, sizes 70 to 300, double-edged with collar
DIN 9805 meat processing machines; Pre-cutters and perforated discs for meat mincers, sizes 70 to 300, for knives with a collar
DIN 9809 meat processing machines; Insert rings for meat grinders, sizes 70 to 300
DIN 9810 food machine - cutting sets for wolves with knives with collar - Unger system, sizes R70 to X400
DIN 9811 column frames
- Part 1 Technical delivery conditions
- Part 2 installation guidelines
DIN 9812 column frames with central guide columns
DIN 9814 column frames with central guide columns and movable punch guide plate
DIN 9816 pillar frames with central guide pillars and thick pillar guide plate
DIN 9819 pillar frames with overhanging guide pillars
DIN 9822 column frames with rear guide columns
DIN 9825 tools for stamping technology - guide pillars for pillar frames
- Part 2 form D
- Part 4 Form L and Form LA
DIN 9830 cutting burr heights on stamped parts
DIN 9831 punching technology tools - guide bushes for column frames
- Part 1 Form AG, Form BG and Form CG, sliding guides
- Part 2: Form AW, Form BW and Form CW, roller guides
DIN 9832 tools of stamping technology - holding pieces for guide bushes and guide pillars
DIN 9833 tools for punching technology - guide pillars, form D
DIN 9834 tools for punching technology - guide bushes
DIN 9835 elastomer compression springs for tools in stamping technology
- Part 1
  - Supplement 1 spring characteristics
- Part 2 requirements and testing
DIN 9841 cylinder screws with hexagon socket and shoulder shank, for punching tools
DIN 9861 round cutting punches
- Part 1 with a continuous shaft up to 20 mm cutting diameter
- Part 2 with stepped shank up to 5.5 mm cutting diameter
DIN 9868 tools of stamping technology - column frames made of steel
DIN 9869 terms for tools
- Part 1 for the production of thin, predominantly surface-determined workpieces; Classification
- Part 2 of the punching technique; Cutting tools
DIN 9870 terms of punching technology
- Part 1 Manufacturing processes and tools, general terms and alphabetical overview
- Part 2 manufacturing processes and tools for cutting
- Part 3 manufacturing processes and tools for bending
DIN 9925 round wire snap rings for shafts
DIN 9926 round wire snap rings for holes

DIN 10000-14999

DIN 10054 Milk and milk products - Determination of the L- and D-lactic acid content (L- and D-lactate) - reflectometric method (screening method)

DIN 10102 Microbiological examination of meat and meat products; Detection of Clostridium botulinum and botulinum toxin

DIN 10103 Microbiological examination of meat and meat products; Determination of mesophilic sulfite-reducing clostridia; Plate casting process (reference process)

DIN 10106 Microbiological examination of meat and meat products; Determination of Enterococcus faecalis and Enterococcus faecium; Spatula method (reference method)

DIN 10109 Microbiological examination of meat and meat products; Determination of aerobically growing lactic acid bacteria; Spatula method (reference method)

DIN 10112 Microbiological tests of meat and meat products - Determination of the surface germ content on meat - Destructive process (removal process)

DIN 10113 Determination of the surface germ content on furnishings and utensils in the food sector

Part 1 quantitative swab method
Part 2 Semiquantitative swab method
Part 3 Semiquantitative method with medium-coated sampling devices (contact method)

DIN 10115 Basics of the detection and determination of microorganisms using the impedance method

DIN 10118 Analysis of food - Detection of verotoxin-producing Escherichia (E.) coli strains (VTEC) in food of animal origin

DIN 10120 Analysis of food - Detection of Salmonella by means of an impedance method

DIN 10121 Detection of Salmonella in food by means of enzyme-linked fluorescence immunoassay

DIN 10122 Analysis of foodstuffs - Counting of microorganisms using the impedance method - Determination of the aerobic mesophilic germ count

DIN 10123 Analysis of food - Detection of Salmonella by means of immunoassays

DIN 10124 ATP measurement - Basics for determining the hygiene status using bioluminescence

DIN 10135 Microbiology of food and feed - Polymerase chain reaction (PCR) for the detection of pathogenic microorganisms in food - Procedure for the detection of Salmonella

DIN 10161 Microbiological examination of meat and meat products - Determination of the aerobic germ count at 30 ° C - drip plate method

DIN 10164 Microbiological examination of meat and meat products; Determination of Enterobacteriaceae

Part 1 spatula method (reference method)
Part 2 drip plate method

DIN 10167 Detection of Escherichia coli O 157 in meat and meat products

DIN 10172 Microbiological milk analysis; Determination of the coliforms

Part 1 method with liquid nutrient medium
Part 3 Solid Medium Method

DIN 10183 Microbiological milk analysis; Determination of Escherichia coli

Part 1 method with liquid nutrient medium
Part 2 membrane agar method
Part 3 fluorescence-optical method with parallel determination of coliforms

DIN 10186 Microbiological milk analysis - Determination of the number of yeasts and molds - Reference method

DIN 10192 Microbiological milk analysis - Determination of the germ count

Part 5 spatula method

DIN 10194 Microbiological milk analysis; Detection of Streptococcus agalactiae in raw milk

DIN 10197 Microbiological milk analysis; Detection of staphylococcal thermonuclease; Reference method

DIN 10198 Microbiological milk analysis - Determination of presumptive Bacillus cereus - Colony counting method at 37 ° C

DIN 10223 Analysis of spices and flavoring ingredients - Determination of total ash and acid-insoluble ash

DIN 10229 Investigation of spices and seasoning ingredients - Determination of the water content - Distillation method

DIN 10234 Analysis of spices and seasoning ingredients - Determination of the capsaicinoid content in paprika powders, paprika oleoresins, chilli powders and chilli oleoresins - Method with high-performance liquid chromatography (HPLC)

DIN 10235 Pepper and pepper oleoresins - Determination of the pipeline content - Method with high performance liquid chromatography (HPLC)

DIN 10236 Investigation of spices and seasoning ingredients - Determination of the drying loss in Capsicum and Allium species as well as in dried vegetables by means of vacuum drying

DIN 10255 Analysis of tobacco and tobacco products; Determination of gas volume flows with the wetting agent lamellar burette

DIN 10280 Dairy analysis equipment; Mojonnier extraction tube for determining the fat content

DIN 10284 butyrometer for cream, according to Roeder, calibratable

DIN 10285 butyrometer for cream, according to Schulz, calibratable

DIN 10286 butyrometer for cheese, according to van Gulik, measuring range 0 to 40%, calibratable

DIN 10290 thermometer for the density measurement of milk and skimmed milk

DIN 10293 hydrometers for density measurement of buttermilk serum, calibratable

DIN 10294 butter melting cup for determining the water content of butter

DIN 10304 Determination of the moisture content and dry matter of glucose syrup

Part 3 Refractometer Procedure

DIN 10311 Determination of the water distribution in butter; Indicator paper procedure

DIN 10316 Determination of the acidity of milk and liquid milk products, according to Soxhlet-Henkel

DIN 10318 Determination of the density of the heat serum of buttermilk

DIN 10321 Determination of the water content of milk powder

DIN 10324 Determination of the total phosphorus content of cheese and processed cheese; Spectrophotometric method

DIN 10325 Milk and milk products - Determination of citric acid content - Enzymatic method

DIN 10326 Milk products and ice cream - Determination of the sucrose and glucose content - Enzymatic method

DIN 10329 Determination of the fat content of cream (cream); Weighing method according to Roeder

DIN 10331 Determination of the hardness of butter

DIN 10332 Determination of the fat content of cream (cream); Procedure according to Schulz and Kley

DIN 10335 Milk and milk products except milk powder - Determination of the content of L- and D-lactic acid (L- and D-lactate) - Enzymatic method

DIN 10337 Determination of the alkaline phosphatase activity in milk; Enzymatic process

DIN 10342 Determination of the fat content of milk and milk products according to the gravimetric Weibull-Berntrop method

DIN 10344 Milk and milk products - Determination of the lactose and D-galactose content - Enzymatic method

DIN 10348 Determination of the dry matter content of milk and cream (cream); Reference method

DIN 10349 Determination of the pH value in butter plasma

DIN 10355 ground products from grain; Requirements, types, testing

DIN 10360 fruit and vegetables; Determination of the dry matter content of frozen spinach or spinach preserved by heat sterilization

DIN 10371 Analysis of tobacco and tobacco products - Determination of the glucose, fructose and sucrose content - High-performance liquid chromatographic method

DIN 10372 Analysis of tobacco and tobacco products - Determination of the glycerol, propylene glycol and sorbitol content - High-performance liquid chromatographic method

DIN 10373 Examination of tobacco and tobacco products - Determination of the nicotine content - Gas chromatographic method

DIN 10377 Tobacco and tobacco products - Determination of preservatives with high-performance liquid chromatography

DIN 10380 Analysis of starch and starch products; Determination of the raw fat content

DIN 10450 Determination of the free acidity of caseins; Reference method

DIN 10451 Determination of the bound ash of caseins; Reference method

DIN 10452 Determination of the ashes of rennet caseins and caseinates; Reference method

DIN 10453 Determination of the water content of caseins and caseinates; Reference method

DIN 10454 Determination of the protein content of caseins and caseinates; Reference method

DIN 10461 Determination of the lactulose content of milk

DIN 10463 Determination of the fat-free dry matter of butter; Routine procedure

DIN 10464 Determination of casein content and the proportion of casein and whey protein in the total protein of milk and milk products - casein-phosphorus method

DIN 10466 Determination of the whey protein content in the total protein of milk and milk products - polarographic method

DIN 10468 Determination of the phosphatide value of milk and milk products

DIN 10469 Detection of the animal species in milk and milk products with isoelectric focusing

DIN 10470 Milk and milk products - Determination of the whey protein and casein content in the total protein - Derivative spectroscopic method

DIN 10471 Determination of D-gluconic acid (D-gluconate) in milk and milk products - enzymatic method

DIN 10472 Determination of the whey protein and casein content in the total protein of milk and milk products - Electrophoretic method

DIN 10473 Determination of the content of acid-soluble β-lactoglobulin in heat-treated milk - reversed-phase high-performance liquid chromatographic method

DIN 10474 Determination of the type of butter by neural network analysis of compositional parameters - chemometric method

DIN 10477 Determination of the total ash in milk and milk products

DIN 10479 Butyrometric determinations of the fat content of milk and milk products

Part 1 General instructions for the use of butyrometric methods and technical delivery conditions for amyl alcohol
Part 2 product-specific requirements

DIN 10480 Determination of the total fat content of butter and other spreadable fats - extraction process with supercritical carbon dioxide

DIN 10481 rapid procedure for the dairy laboratory - General framework conditions and requirements for use

DIN 10482 Determination of the annatto content in cheese

Part 1 Photometric method
- Correction 1
Part 2 high performance liquid chromatographic method

DIN 10483 Determination of lactoperoxidase activity in milk

Part 1 photometric method (reference method)
Part 2 reflectometric method

DIN 10484 milk - Determination of the content of urea and ammonia - photometric method

DIN 10500 food hygiene - sales vehicles and mobile, non-permanent sales facilities for perishable food - hygiene requirements, testing

DIN 10501 food hygiene - sales furniture

Part 1 refrigerated sales units for frozen and deep-frozen food and ice cream - hygiene requirements, testing
Part 2 refrigerated sales units for chilled food - hygiene requirements, testing
Part 3 sales containers for food that are offered for sale at ambient temperature - hygiene requirements, testing
Part 4 Sales heating furniture for food kept hot - Hygiene requirements, testing
Part 5 refrigerated sales units for offering salads and salad dressings in self-service; Hygiene requirements, testing

DIN 10502 food hygiene - transport container for liquid, granular and powdery food

Part 1 materials, constructive features, assessment of suitability, marking, proof of use and identification
Part 2 cleaning and disinfection

DIN 10503 food hygiene - terms

Supplement 1 Food hygiene - flowcharts for use in the HACCP concept - symbols, type of presentation

DIN 10505 food hygiene - ventilation systems for food retail outlets - requirements, testing

DIN 10506 food hygiene - communal catering

DIN 10507 food hygiene - cream whipping machines, mixing cartridge type - hygiene requirements, testing

DIN 10508 food hygiene - temperatures for food

DIN 10510 Food hygiene - Commercial dishwashing with multi-tank transport dishwashers - Hygienic requirements, procedure test

DIN 10511 Food hygiene - Commercial glass washing with glass washers - Hygienic requirements, testing

DIN 10512 Food hygiene - Commercial dishwashing with single-tank dishwashers - Hygienic requirements, type testing

DIN 10514 food hygiene - hygiene training

DIN 10516 food hygiene - cleaning and disinfection

DIN 10518 Food hygiene - Production and immediate delivery of ice cream to the consumer - Hygiene requirements, testing

DIN 10519 food hygiene - self-service facilities for unpackaged food - hygiene requirements

DIN 10521 Food hygiene - Line-independent household water filters - Household water filters based on cation exchangers and activated carbon

DIN 10522 Food hygiene - Commercial machine washing of reusable boxes and reusable containers for unpackaged food - Hygiene requirements, testing

DIN 10523 food hygiene - pest control in the food sector

DIN 10524 Food hygiene - work clothing in food companies; Text in German, English and French

DIN 10526 food hygiene - reference samples in public catering

DIN 10527 food hygiene - dispensing of perishable food from vending machines - hygiene requirements

DIN 10528 Food hygiene - Instructions for the selection of materials for contact with food - General principles

DIN 10529 Dosing systems for the oral administration of powdered or liquid finished medicinal products for farm animals

Part 1 Dosing systems for powdered finished medicinal products for administration via flour-like feed
Part 2 Dosing systems for liquid finished medicinal products for administration via drinking water

DIN 10535 food hygiene - baking stations in retail - hygiene requirements

DIN 10536 Food Hygiene - Cook & Chill Process - Hygiene Requirements

DIN 10741 Examination of honey - General guidelines for the ad hoc validation of analysis methods for organic residues or contaminants

DIN 10742 examination of honey - guidelines for sampling

DIN 10743 Examination of honey - Determination of the content of water-insoluble substances

DIN 10750 Examination of honey - Determination of the diastase activity

DIN 10751 Examination of honey - Determination of the content of hydroxymethylfurfural

Part 1 Photometric method according to Winkler
Part 3 high performance liquid chromatographic method

DIN 10752 examination of honey; Determination of the water content; Refractometric method

DIN 10753 Examination of honey - Determination of electrical conductivity

DIN 10754 investigation of honey - determination of the prolin content

DIN 10755 investigation of honey - determination of ash

DIN 10756 Examination of honey - Determination of the free acid content

DIN 10758 Examination of honey - Determination of the content of the saccharides fructose, glucose, sucrose, turanose and maltose - HPLC method

DIN 10759 Examination of honey - Determination of the saccharase activity - Siegenthaler method

DIN 10760 Examination of honey - Determination of the relative pollen frequency

DIN 10762 Analysis of honey - Determination of the ethanol content - Enzymatic method

DIN 10763 Analysis of honey - Determination of the glycerine content - Enzymatic method

DIN 10764 Analysis of coffee and coffee products - Determination of the mass loss of coffee extract

Part 2 vacuum drying cabinet method (routine method)
Part 3 Sea sand process for liquid coffee extracts
Part 4 drying cabinet process for soluble coffee and coffee specialties at normal pressure (routine process)

DIN 10765 Analysis of coffee and coffee products - Determination of the grain size of roasted ground coffee - Air jet sieve method

~~DIN 10766 Analysis of coffee and coffee products; Determination of the water content of green coffee, dioxane distillation, Karl Fischer titration~~

DIN 10767 Analysis of coffee and coffee products - Determination of the chlorogenic acid content in roasted coffee and coffee extract - HPLC method

DIN 10772 Analysis of coffee and coffee products - Determination of the water content according to Karl Fischer

Part 1 reference method for roasted coffee
Part 2 reference method for coffee extract

DIN 10775 Analysis of coffee and coffee products - Determination of the water-soluble extract content - Procedure for roasted coffee

DIN 10776 Analysis of coffee and coffee products - Determination of the pH value and the degree of acidity

Part 1 procedure for roasted coffee
Part 2 procedure for coffee extract

DIN 10779 Analysis of coffee and coffee products - Determination of the 16-O-methylcafestol content in roasted coffee - HPLC method

DIN 10780 coffee extract - Determination of free and total carbohydrates - Procedure with high-performance anion exchange chromatography

DIN 10781 Roasted ground coffee - Determination of the loss of mass at 103 ° C (routine method for determining the water content)

DIN 10783 Analysis of coffee and coffee products - Determination of the dichloromethane content in decaffeinated green coffee with headspace gas chromatography

DIN 10785 Analysis of coffee and coffee products - Determination of acrylamide - Method using HPLC-MS / MS and using GC-MS after derivatisation

DIN 10792 Analysis of coffee and coffee products - Preparation of a coffee beverage for analytical purposes

DIN 10800 Examination of tea - Determination of the loss of mass of unground tea at 103 ° C

DIN 10802 Examination of tea - Determination of total ash

DIN 10805 Analysis of tea; Determination of the acid-insoluble ash

DIN 10806 Examination of tea - production of a ground sample with a defined dry matter

DIN 10807 Examination of tea - Determination of the fluoride content - Potentiometric method

DIN 10809 testing of tea; Preparation of an infusion for sensory tests

DIN 10810 Analysis of tea and tea products - Determination of the theobromine and caffeine content of solid tea extract and preparations made from food with tea extract - HPLC method

DIN 10811 Analysis of tea and tea products - Determination of the theobromine and caffeine content of liquid tea beverages

Part 1 HPLC routine procedure
Part 2 HPLC reference method (also for low contents of theobromine)

DIN 10950 Sensory testing - general principles

DIN 10955 Sensory testing - testing of packaging materials and packaging for food

DIN 10956 Sensory examination devices - Universal test glasses and lids - Requirements and application notes

~~DIN 10959 Sensory test methods - Determination of taste sensitivity~~

DIN 10960 Sensory examination devices - test glasses for wine

DIN 10964 Sensory test methods - Simply descriptive test

~~DIN 10967 Sensory test methods - profile test~~

~~Part 1 Conventional profile~~
~~Part 2 consensus profile~~
~~Part 3 Free selection profile~~
~~Part 4 test plans~~

DIN 10968 Sensory testing - Determination and checking of the minimum shelf life of foods

DIN 10969 Sensory test methods - Descriptive test with subsequent quality assessment

DIN 10970 Sensory test methods - time intensity test

DIN 10972 Sensory test method - "A" - "not A" test

DIN 10973 sensory test method - inside / outside test (in / out test)

DIN 10974 Sensory analysis - consumer tests

DIN 10975 sensory test methods - expert opinion on food law assessment

DIN 10976 Sensory test - Difference from Control-Test (DfC-Test)

DIN 11014 agricultural machinery; Countersunk screws with 2 lugs, countersinks, metric thread, version g

DIN 11015 agricultural machinery - truss-head bolts with short square neck

DIN 11023 Agricultural machinery and farm tractors; Linch pin

DIN 11024 spring clip

DIN 11025 Agricultural machinery and farm tractors; Non-automatic trailer coupling

Part 2 agricultural machinery and tractors; Non-automatic trailer coupling; arrangement

DIN 11026 agricultural machinery and tractors; Drawbar eye 40 with reinforced shaft with bushing; Dimensions

DIN 11027 Agricultural machinery and tractors - Removable light and warning panel units - Free spaces, attachment, shape

DIN 11028 agricultural machinery and tractors - trailer coupling - pin coupling for towing eye 40

DIN 11030 agricultural machinery and tractors - identification of attachments and attached work equipment - warning sign and warning foil

DIN 11032 Agricultural machinery and agricultural tractors; Reversible handbrake levers, dimensions

DIN 11043 agricultural machinery and tractors; Towing eye 40 for trailers with an articulated drawbar with socket; Dimensions

DIN 11088 ski bindings for alpine skiing - selection of release torque values using the tibia method

DIN 11168 agricultural machinery; Equipment for planting and caring for plants, tool rail

DIN 11204 connecting elements - test certificates - list and description of the information

DIN 11210 agricultural machinery; Tape sprayers; Connection dimensions for nozzle holder

DIN 11215 agricultural machinery; Plant protection sprayers, connection dimensions for nozzles

DIN 11349 agricultural machinery; Protective device for grass mower cutting units with fingers, safety requirements

DIN 11389 agricultural machinery and tractors; Harvester; Terms, parameters, performance

DIN 11390 agricultural machinery; Test method for combine harvesters

DIN 11483 dairy machines and systems - cleaning and disinfection

Part 2 Consideration of the influences on elastomeric sealing materials

DIN 11484 dairy farming machines; Agitators; Requirements for cleanability

DIN 11488 dairy machinery and equipment

Part 1 terms
Part 2 planning and acceptance
Part 3 system technology

DIN 11540 peat and peat products for horticulture and gardening and landscaping - test methods, properties, technical delivery conditions

Correction 1

DIN 11595 garden tools - Non-motorized hand tools for tillage - Digging fork

DIN 11616 garden tools - Non-motorized hand tools for soil cultivation - Hand cultivators with interchangeable tines

DIN 11622 Fermentation silos, liquid manure containers, containers in biogas plants, mobile silos

~~Part 1 dimensioning, execution, condition; General requirements~~
Part 2 Dimensioning, execution, properties - Fermentation silos and slurry tanks made of reinforced concrete, precast reinforced concrete parts, molded concrete blocks and concrete shuttering blocks
Part 4 Fermentation silos and slurry tanks; Part 4: Dimensioning, execution, quality; High fermentation feed silos and high-level liquid manure tanks made of steel
Part 5 driving silos
Part 22 concrete shuttering blocks for fermentation feed silos, liquid manure tanks, mobile silos and liquid manure channels

DIN 11740 agricultural machinery and tractors; Gauges for transport trailers

DIN 11741 agricultural machinery and tractors; Dimensions for transport trailer; Drawbar, trailer coupling, loading volume

DIN 11742 agricultural machinery; Inner shoe brakes for transport trailers, main dimensions

DIN 11744 agricultural machinery and tractors - disc wheels for transport trailers - connection dimensions

DIN 11746 agricultural machinery - determination of payload, vertical load and axle load - rigid drawbar trailer, articulated drawbar trailer

DIN 11747 agricultural machinery and tractors; Leaf springs for transport trailers; Dimensions

DIN 11751 agricultural machinery and tractors; Hydraulic cylinder for transport trailer (200 bar); Connection dimensions

DIN 11800 Landtechnik - Electronic data exchange in agriculture - Data exchange in the field of dairy farming

~~DIN 11850 pipes for food, chemistry and pharmacy - pipes made of stainless steels - dimensions, materials~~

DIN 11851 fittings made of stainless steel for foodstuffs and chemicals - pipe screw connections for rolling and butt welding

DIN 11852 fittings for foodstuffs and chemicals - fittings made of stainless steel - T-pieces, elbows and reducers for welding

DIN 11853 fittings made of stainless steel for food and chemistry

Part 1 hygiene pipe screw connection, short version
Part 2 hygiene flange connection, short version
Part 3 hygiene clamp connection, short version

DIN 11854 fittings for food and pharmaceuticals - hose connections made of stainless steel

DIN 11861 Beverage and dairy fittings; Rubber seals, requirements, testing

DIN 11864 fittings made of stainless steel for aseptic , chemical and pharmaceutical applications
- Part 1 aseptic pipe union, standard design
- Part 2 aseptic flange connection, standard design
- Part 3 aseptic clamp connection, standard design
DIN 11865 fittings made of stainless steel for aseptic, chemical and pharmaceutical - T-pieces, elbows, reducers for welding
DIN 11866 components made of stainless steel for aseptic applications in the chemical and pharmaceutical industry - pipes
DIN 11867 elbow for pigging systems made of stainless steel for aseptic, chemical and pharmaceutical, for welding
DIN 11868 sampling systems in milk collecting trucks
- Part 1 requirements, main and repeat exams
- Part 2 type test
- Part 3 Minimum requirements for test centers that carry out main and type tests
DIN 11869 flow sight glass
DIN 11900 laundry and dry cleaning machines; Common Terms
DIN 11901 laundry and dry cleaning machines; Measured quantities, formula symbols, units, calculation formulas
DIN 11902 laundry and dry cleaning machines; Checking machine throughput, treatment effect and resource consumption, test conditions and procedures
DIN 11915 laundry and dry cleaning machines; Dry cleaning machines; Terms, explanations
DIN 11916 laundry and dry cleaning machines; Distillers for dry cleaning machines; Terms, requirements
DIN 12116 Testing of glass - Resistance to a boiling aqueous hydrochloric acid solution - Test method and classification
DIN 12214 laboratory equipment made of glass - glass tube ends and lids with laboratory flat flange - dimensions, requirements
DIN 12215 laboratory glassware; Glass tube ends for hose connections, olives, capillary tube ends
DIN 12216 Laboratory glassware; Glass tube ends with round thread
DIN 12217 laboratory glassware - tubes made of borosilicate glass 3.3
DIN 12242 laboratory glassware; Conical ground joints for interchangeable connections
- Part 1 dimensions, tolerances
DIN 12244 laboratory glassware; Ball joints for interchangeable connections
- Part 1 dimensions, tolerances
DIN 12245 laboratory equipment made of glass; Tapered sleeves, taper 1: 10, rough or roughly ground, dimensions, tolerances
DIN 12249 laboratory equipment made of glass; Connecting pieces with conical ground
DIN 12252 laboratory glassware; Stopper with conical ground
DIN 12254 laboratory equipment made of plastics; Plug for conical ground joint sleeves
DIN 12256 laboratory glassware; Leak test of conical joint connections, spherical joint connections and conical valves
DIN 12257 laboratory equipment made of glass; Transition pieces
DIN 12263 clamps for spherical joints
DIN 12264 laboratory glassware; Connection pieces with spherical joint
DIN 12330 laboratory equipment made of quartz glass (fused silica) and fused silica (fused silica); Quartz glass beaker (fused silica)
~~DIN 12331 Laboratory glassware; Cup~~ , replaced by DIN EN ISO 3819
DIN 12336 Laboratory glassware; Evaporating dishes with a flat bottom
DIN 12337 Laboratory glassware; Crystallizing bowls without spout
DIN 12338 Laboratory glassware; Crystallizing bowls with spout
DIN 12340 Laboratory glassware; Low cans with a seam
DIN 12341 Laboratory glassware; Watch glass bowls
DIN 12353 Laboratory equipment made of quartz glass (fused silica) and fused silica (fused silica); Quartz glass (fused silica) flask; Round bottom flasks, flat bottom flasks and Erlenmeyer flasks
DIN 12360 Laboratory glassware; Kjeldahl flask
DIN 12383 laboratory equipment made of glass; Pointed butt
DIN 12392 laboratory equipment made of glass; Reaction flask
DIN 12394 laboratory glassware; Distillation flask
DIN 12404 laboratory equipment made of glass; Boiling capillaries
DIN 12420 laboratory equipment made of glass; Distillation template for the water determination device
DIN 12448 Laboratory equipment made from paper fibers; Paper filter
DIN 12449 Laboratory equipment made of paper fibers; Extraction thimbles
DIN 12463 laboratory glassware; Bottles 200 mm high with standard ground joint
DIN 12473 laboratory equipment made of glass
- Part 1 gas sampling tubes with one-way tapered taps
DIN 12480 laboratory glassware - three-neck bottles - Woulff bottles
DIN 12485 laboratory glassware; Kipp gas generating apparatus
DIN 12540 laboratory equipment made of glass
- Part 1 cone valves, cone 1:10, interchangeability conditions
DIN 12541 laboratory equipment made of glass
- Part 1 disposable cone taps
DIN 12542 Laboratory equipment made of quartz glass (fused silica) and fused silica (fused silica); One-way cone taps made of quartz glass (fused silica), exchangeable, cone 1: 10
DIN 12543 Laboratory equipment made of quartz glass (fused silica) and fused silica (fused silica); Three-way cone cocks made of quartz glass (fused silica) with T-hole, exchangeable, cone 1: 10
DIN 12545 laboratory glassware; Conical valves for vacuum
DIN 12553 laboratory glassware; Two-way cone valves with parallel bores
DIN 12554 laboratory glassware; Three-way cone valves with T-hole
DIN 12560 laboratory glassware; Taper cocks with angled hole for burettes (burette cocks on the side)
DIN 12561 laboratory equipment made of glass; Taper cocks with straight bore for burettes (straight burette cocks)
DIN 12563 laboratory glassware; Three-way cone cocks with angled bore 120 °
DIN 12576 laboratory glassware; Liebig cooler with conical ground, execution to the west
DIN 12581 laboratory glassware; Ball cooler with conical ground, Allihn cooler
DIN 12591 laboratory glassware; Dimroth cooler with conical ground
DIN 12592 laboratory glassware; Graham cooler with cone ground
DIN 12593 laboratory glassware; Intensive cooler with conical ground
DIN 12594 laboratory glassware - ground-glass components
DIN 12596 laboratory glassware; Gas washing bottles; Drechsel shape
DIN 12600 volume measuring devices for laboratory purposes; Conformity test and certificate of conformity
DIN 12602 laboratory glassware; Soxhlet extractors, with conical grinding
DIN 12604 laboratory glassware; Hot extractors with taper ground
DIN 12605 laboratory glassware - weighing glasses
DIN 12621 laboratory equipment made of glass; Colored identification of pipettes, arrangement, dimensions, identification colors
DIN 12622 laboratory glassware; Identification of the type of glass for glass appliances
DIN 12646 laboratory equipment made of glass
- Part 2 volumetric flask with a mark, volumetric flask with threaded connection
DIN 12672 laboratory equipment made of glass or plastic - sedimentation vessels according to Imhoff
DIN 12681 laboratory equipment made of plastic - measuring cylinder with scale (ISO 6706: 1981, modified)
DIN 12687 laboratory equipment made of glass; Bulb pipettes on sprue with a mark
DIN 12688 laboratory glassware; Bulb pipettes on sprue with two marks
DIN 12689 laboratory glassware; Graduated pipettes for sprue
DIN 12693 plastic laboratory equipment - disposable capillary pipettes on sprue
DIN 12699 laboratory equipment made of glass; Enzyme test measuring pipettes, fast running, waiting time 15 seconds, class AS
DIN 12702 laboratory glassware; Gas volumetric measuring devices, gas burettes, azotometers, eudiometers, nitrometers
DIN 12750 laboratory equipment made of glass; Blood mixing pipettes for counting blood cells
DIN 12769 liquid glass thermometer; Overview
DIN 12770 laboratory glassware; Liquid glass thermometer; General provisions
- Supplement 1 General information, explanatory information
DIN 12771 Laboratory glassware; Calorimeter containment thermometer, measuring range span 6 ° C
DIN 12775 laboratory equipment made of glass; Laboratory thermometer, scale values 0.1 ° C, 0.2 ° C and 0.5 ° C
DIN 12776 laboratory glassware; Allihn thermometer set
DIN 12777 laboratory equipment made of glass; Anschütz thermometer set
DIN 12778 laboratory glassware; Laboratory thermometer, scale values 1 ° C and 2 ° C
DIN 12779 laboratory equipment made of glass; Laboratory thermometer, quick reading (distillation thermometer)
DIN 12781 laboratory equipment made of glass; Laboratory stick thermometer
DIN 12784 laboratory glassware; Core cut thermometer
DIN 12785 laboratory glassware; Laboratory thermometers for special purposes
- Supplement 1 Explanatory Notes
DIN 12786 laboratory glassware; Inclusion thermometer for thermal economic studies
DIN 12789 laboratory glassware; Beckmann thermometer, setting inclusion thermometer
DIN 12790 laboratory equipment made of glass; Hydrometers, basics for construction and adjustment
DIN 12791 laboratory glassware - density hydrometers
- Part 1 General Requirements
- Part 2 standard sizes, designation
- Part 3 Use and Testing
DIN 12793 Laboratory glassware; Search hydrometers for preliminary measurements and raw operational measurements
DIN 12799 laboratory equipment made of glass; General purpose stick thermometer
DIN 12803 laboratory glassware; Alcoholmetry
- Part 1 General provisions for alcoholometers
- Part 2 alcoholometer for volume concentration
DIN 12804 laboratory glassware; Density hydrometers for liquefied hydrocarbons (liquid gas hydrometers)
DIN 12807 laboratory glassware; Bingham pycnometer
DIN 12808 laboratory glassware; Pycnometer according to Jaulmes
DIN 12835 Dairy analysis equipment - sample bottles for milk
DIN 12836 Dairy examination equipment
- Part 1 butyrometer for milk, measuring range 0 to 5% and above, calibratable
- Part 2 butyrometer for milk, measuring range 0 to 4%, calibratable
- Part 3 butyrometer for milk, measuring range 0 to 10%, calibratable
DIN 12837 Dairy analysis equipment; Pipettes to the butyrometer for milk
DIN 12838 dilution pipette according to Demeter 1.1
DIN 12839 dilution pipette according to Demeter 2.2
DIN 12847 laboratory glassware - cell counting chambers
- Part 1 General Requirements
- Part 2 counting nets
DIN 12851 laboratory porcelain; Requirements, testing
DIN 12865 laboratory equipment; Rubber hoses
DIN 12871 Laboratory equipment made of rubber and plastics; Rubber stopper
DIN 12876 Electrical laboratory devices - laboratory thermostats and laboratory baths
- Part 1 Terms and Classification
- Part 2 Determination of the characteristics of heating and cooling thermostats
- Part 3 Determination of the characteristics of laboratory baths
DIN 12878 Electrical laboratory equipment; Adjustable liquid-glass contact thermometers and control devices, general and safety requirements and testing
DIN 12880 Electrical laboratory equipment - heating and incubators
DIN 12889 laboratory equipment; Tripods
DIN 12890 laboratory equipment; spatula
DIN 12892 laboratory equipment made of metal; Tripod plates
DIN 12893 laboratory equipment made of metal; Tripod rods
DIN 12894 laboratory equipment made of metal - stand clamps
DIN 12895 laboratory equipment made of metal; Tripod sleeves
- Part 1 double sleeves, rigid and rotatable
- Part 2 hook socket
DIN 12897 laboratory equipment made of metal; Lifting platforms, safety requirements, testing
DIN 12898 laboratory fittings; Hose nozzles
DIN 12899 safety emergency showers
- Part 3 body showers for companies and handling facilities
DIN 12900 laboratory data communication
- Part 1 point-to-point connection with RS-232; Physical specifications
DIN 12901 laboratory equipment; Porcelain water bath rings
DIN 12902 laboratory equipment; Porcelain water bath plates
DIN 12903 laboratory equipment made of hard porcelain; Evaporation dishes with spout
DIN 12904 laboratory equipment made of hard porcelain; Crucible and crucible lid
DIN 12905 laboratory equipment made of hard porcelain; Nut filters and filter funnels
DIN 12906 laboratory equipment made of hard porcelain; Mortar, pestle
DIN 12907 laboratory equipment made of hard porcelain; Saucepans
DIN 12908 laboratory equipment made of hard porcelain
- Part 1 combustion tubes, dimensions
DIN 12909 laboratory equipment made of hard porcelain; Filter crucible
DIN 12911 laboratory equipment made of hard porcelain; Desiccator plates
DIN 12912 laboratory equipment; Ceramic tiles for laboratory tables (laboratory table tiles)
DIN 12915 laboratory equipment; Bench basin
DIN 12916 laboratory equipment - large-format laboratory table tops
DIN 12918 laboratory equipment - laboratory fittings
- Part 1 withdrawal points for water
- Part 2 tapping points for fuel gases
- Part 3 tapping points for technical gases
- Part 4 tapping points for high purity gases
DIN 12924 laboratory equipment - fume cupboards
- Part 3 pass-through prints
- Part 4 prints for pharmacies
DIN 12927 Laboratory equipment - Extraction boxes with air return - Requirements, tests
~~DIN 12950 laboratory equipment; Safety workbenches for microbiological and biotechnological work~~ , replaced by DIN EN 12469
- ~~Part 1 Safety requirements and testing~~
- ~~Part 2 retention capacity of safety cabinets class 1 and class 2, microbiological testing~~
- ~~Part 3 Product protection of safety cabinets class 2; Microbiological test (draft)~~
- ~~Part 4 Carrier protection in safety cabinets class 2; Microbiological test (draft)~~
- ~~Part 10 requirements, testing~~
DIN 12980 laboratory equipment - safety workbenches and isolators for cytostatics and other CMR drugs
DIN 13013 hospital mattresses made of latex foam; Dimensions, requirements, testing
- Supplement 1 Instructions for use and treatment
DIN 13014 hospital mattresses made of polyether foam; Dimensions, requirements, testing
- Supplement 1 Instructions for use and treatment
DIN 13019 bandage plaster packs for the first aid area - dimensions
DIN 13024 stretcher
- Part 1 With rigid spars; Dimensions, requirements, testing
- Part 2 With foldable bars; Dimensions, requirements, testing
DIN 13027 orthopedic technology; Arm prostheses; Connection parts for prosthetic hands and tools
DIN 13046 chassis for stretchers, foldable
DIN 13050 terms in rescue services
~~DIN 13061 shin guards for soccer players~~
~~DIN 13071 restraint systems for patients in the sickroom - terms, requirements, testing~~ , February 2005 withdrawn without replacement

DIN 13073 rescue systems - Dimensions for holding systems for locking chassis and stretchers in ambulances

DIN 13080 Division of the hospital into functional areas and functional areas

Supplement 3 Form for determining areas in the hospital
Supplement 4 Terms and structure of target planning for general hospitals

DIN 13086 External insertion cannulas for suprapubic catheter systems for single use - requirements and tests

DIN 13090 cones and cone connections for medical devices

Part 4 lockable cone connections for endoscopes

DIN 13097 Medical cannulas

Part 4 Types of grinding, requirements and testing
Part 5 bases, approaches and connections - requirements and testing

DIN 13111 Medical instruments - bandage scissors

DIN 13112 medical instruments

Part 1 dissecting scissors without carbide inserts

DIN 1314 medical instruments

Part 1 Mayo scissors, without carbide inserts

DIN 13116 Medical instruments - Straight bandage scissors according to Smith

DIN 13117 Medical instruments - bone scissors

DIN 13122 Medical instruments - hook pliers with 1 × 1 prongs, straight

DIN 13123 Medical instruments - hook pliers with 2 × 2 prongs, straight

DIN 13128 Medical instruments - Allis intestinal grasping forceps

DIN 13129 Medical instruments - Maier dressing forceps, straight

DIN 13130 Medical instruments - Maier forceps, curved

DIN 13137 Medical instruments - Abdominal wall hook according to Fritsch

DIN 13151 bandages - bandages

DIN 13152 bandages - bandages

DIN 13154 disposable emergency ventilation aid for lay helpers - requirements and testing

DIN 13155 First aid material - medical suitcase

DIN 13156 one-person supply set for first aid in the event of a mass accident, major damage event and in the event of a disaster

DIN 13157 first aid material - first aid kit C (small first aid kit)

~~DIN 13160 first aid material - medical bags (or medical shoulder bags , for disaster control / MANV case)~~ , withdrawn

DIN 13164 first aid material - first aid kit B (vehicle first aid kit)

DIN 13167 first aid material for motorcycles

DIN 13168 bandages; Triangular cloth

DIN 13169 first aid material - first aid kit E (large first aid kit)

DIN 13171 Medical instruments - Adson-Brown surgical forceps

DIN 13172 Medical instruments - De Bakey vascular forceps

DIN 13173 Medical instruments - swab forceps

DIN 13175 Medical instruments - Tongue pliers according to Young

DIN 13176 Medical instruments - Organ grasping forceps

DIN 13177 Medical instruments - kidney stone forceps according to Randall

DIN 13178 Medical instruments - Gallstone forceps according to Desjardins

DIN 13181 Medical instruments - Clamp instruments according to McKenzie

Part 1 clamp holding forceps
Part 2 clip and connection dimensions of the bearing rail

DIN 13182 Medical Instruments - Bile Canal Clamps according to Lahey and according to Gray

DIN 13184 Medical instruments - Bone holding forceps according to Farabeuf

DIN 13189 Medical instruments - Ferris-Smith-Kerrison bone punches

DIN 13190 Medical instruments - Liston bone splinter forceps

DIN 13191 Medical instruments - hollow chisel pliers according to Stille

DIN 13192 Medical instruments - Ruskin gouge pliers

DIN 13193 Medical instruments - Luer gouge pliers

DIN 13194 Medical instruments - Beyer gouge pliers

DIN 13199 Medical instruments - Sharp nose pliers according to Weil-Blakesley and Watson-Williams, non-cutting

DIN 13200 voice prostheses

Part 1 test method for the evaluation of physical parameters; Text in German and English
Part 2 General Requirements; Text in German and English

DIN 13201 street lighting

Part 1 Selection of the lighting classes; German version CEN / TR 13201-1: 2004

DIN 13221 refrigerators and freezers for laboratory applications - terms, requirements, testing

DIN 13222 absorption capacity of sucking incontinence aids up to the point of leakage - test method for measuring the suction power using a test torso

DIN 13230 aircraft for patient transport

Part 6 patient transport by airliner

DIN 13232 emergency equipment

~~DIN 13233 emergency doctor's case for infants and small children~~ , May 2011 replaced by DIN 13232

DIN 13256 pressure chambers for people

Part 1 classification
Part 4 single-person pressure chambers for hyperbaric therapy; Safety requirements and testing
Part 6 bayonet flange connections for transport chambers

DIN 13260 supply systems for medical gases

Part 2 Dimensions and assignment of plugs and gas type-specific connection points for tapping points

DIN 13273 catheter for the medical sector

Part 7 Determination of the X-ray attenuation of catheters; Requirements and testing
Part 8 epidural catheter

DIN 13276 plastic taper connections - resistance to stress cracking

DIN 13301 Special functions in mathematical physics; Signs and concepts

DIN 13302 Mathematical Structures; Signs and concepts

DIN 13303 stochastics

Part 1 Probability Theory, Common Basic Concepts of Mathematical and Descriptive Statistics; Terms and symbols
Part 2 Mathematical Statistics; Terms and symbols

~~DIN 13304 Representation of formula symbols on single line printers and data display devices~~ , withdrawn in 1996

DIN 13310 interfacial tension in fluids; Terms, quantities, symbols, units

DIN 13312 Navigation - terms, abbreviations, symbols, graphic symbols

DIN 13316 Mechanics ideally elastic body; Terms, quantities, formula symbols

DIN 13317 Mechanics of rigid bodies; Terms, quantities, formula symbols

DIN 13320 acoustics; Spectra and transfer curves; Terms, representation

DIN 13322 electrical networks

Part 1 Terms for the topology of electrical networks and graph theory
Part 2 Algebraic topology and basics of the calculation of electrical networks

DIN 13343 linear viscoelastic substances; Concepts, laws of matter, basic functions

DIN 13345 Thermodynamics and Kinetics of Chemical Reactions; Formula symbols, units

~~DIN 13601 diphtheria serum - terms, unit of measurement, testing, labeling~~ , invalid

DIN 13451 Medical instruments - Joseph scissors

DIN 13452 Medical instruments - Kilner scissors

DIN 13456 Medical instruments - Bile duct dilators according to Bakes

DIN 13457 Medical instruments - urethral dilator according to Dittel

DIN 13458 medical instruments - ligature needle

DIN 13459 Medical instruments - Stratte needle holder with hard metal inlays

DIN 13460 Medical instruments - Heaney needle holder

DIN 13461 Medical Instruments - De Bakey needle holder with hard metal inserts

DIN 13465 Medical instruments - Arterial clamps according to Adson

DIN 13468 Medical instruments - Förster sponge tongs

DIN 13469 Medical instruments - Adson preparation clips

DIN 13470 Optics and photonics - FAC lenses - Terms and requirements for data sheets

DIN 13500 box bodies for ambulances - requirements and test methods

DIN 13903 dentistry - bite registration compound

DIN 13940 dentistry

Part 1 Dental handpieces; Connection dimensions (ISO 3964: 1982); German version EN 23964: 1989

DIN 13973 Dental materials - Instructions for testing abrasion resistance

Part 1 Abrasion from brushing your teeth (ISO / TR 14569-1: 2007)

DIN 13978 Dentistry - Filling instruments in contrast

DIN 13979 Dentistry - Mixing spatula

DIN 13989 Dentistry - Lever-free ampoule syringes for intraligamental injections

DIN 13990 Dentistry - Test method for the shear bond strength of adhesives for orthodontic fastening elements

Part 1 Bonding of the adhesive-fastening element and adhesive-tooth enamel interfaces
Part 2 overall connection between fastening element-adhesive-tooth enamel

DIN 13991 dentistry - color determination for dental ceramics

Part 1 shade rings for tooth shade determination

DIN 13994 Dentistry - Bending strength of abutment pins

DIN 13996 Dentistry - Dimensions for wires and fasteners for orthodontic applications

DIN 13997 Dentistry - Orthodontic mini screws

DIN 13998 Dentistry - Test method for the adhesive strength between plastic teeth and denture plastics

DIN 14010 information on the statistical recording of fires

DIN 14011 terms from the fire service

DIN 14033 Abbreviation for the fire brigade

DIN 14034 Graphic symbols for fire fighting

Part 6 Structural facilities

DIN 14035 roof marking for fire fighting vehicles ; execution

DIN 14060 firefighting - trough

DIN 14090 areas for the fire brigade on property

DIN 14092 fire stations

Part 1 planning principles
Part 3 fire tower
Part 7 workshops

DIN 14093 respiratory protection training systems - planning principles

~~Part 1 planning principles~~

DIN 14094 fire services - emergency ladder systems

Part 1 Fixed emergency ladders with back protection, holding device, platforms
Part 2 escape routes on flat and sloping roofs

DIN 14095 fire brigade plans for structures

DIN 14096 fire protection regulations - rules for creating and displaying

DIN 14097 fire training systems

Part 1 General Requirements
Part 2 Gas-powered display devices
Part 3 Wood-fired fire training systems
Part 4 fire brigade training houses

DIN 14142 first aid material - first aid kit for fire engines

DIN 14151 jump rescue devices

~~Part 1 General requirements, testing~~
~~Part 2 jumping mat 8 - requirements, test~~
Part 3 jump pad 16; Requirements, testing

DIN 14210 extinguishing water ponds

Correction 1

DIN 14220 extinguishing water well

DIN 14230 underground extinguishing water tank

DIN 14244 extinguishing water suction connections - above and below ground

DIN 14301 D pressure suction coupling PN 16 made of aluminum alloy

DIN 14302 C pressure coupling PN 16 made of aluminum alloy

DIN 14303 B pressure coupling PN 16 made of aluminum alloy

DIN 14306 D-fixed coupling PN 16 made of aluminum alloy for pressure and suction operation

DIN 14307 C-coupling PN 16, made of aluminum alloy, with sealing ring

Part 1 for printing
Part 2 for suction operation

DIN 14308 B fixed coupling PN 16, made of aluminum alloy, with sealing ring

Part 1 for printing
Part 2 for suction operation

DIN 14309 A fixed coupling PN 16, made of aluminum alloy, with sealing ring for pressure and suction operation

DIN 14310 D-blind coupling PN 16 made of aluminum alloy for pressure and suction operation

DIN 14311 C-blind coupling PN 16, made of aluminum alloy, for pressure and suction operation

DIN 14312 B-blind coupling PN 16, made of aluminum alloy, for pressure and suction operation

DIN 14313 A-blind coupling PN 16 made of aluminum alloy for pressure and suction operation

DIN 14317 C-coupling with metallic sealing surface PN 16, made of aluminum alloy and C-cover, made of gray cast iron or aluminum alloy

DIN 14318 B-coupling with metallic sealing surface PN 16, made of aluminum alloy and B-cover, made of gray cast iron or aluminum alloy

DIN 14319 A-tight coupling with metallic sealing surface PN 16, made of aluminum alloy and A-cover cap, made of gray cast iron or aluminum alloy

DIN 14321 C suction coupling PN 16, made of aluminum alloy

DIN 14322 B suction coupling PN 16 made of aluminum alloy

DIN 14323 A-pressure suction coupling PN 16, made of aluminum alloy

DIN 14330 C pressure coupling PN 16 made of aluminum alloy for dimensionally stable pressure hoses

DIN 14332 C pressure coupling PN 16 made of aluminum alloy for pressure hose C 42

DIN 14341 CD adapter PN 16 made of aluminum alloy

DIN 14342 BC transition piece PN 16 made of aluminum alloy

DIN 14343 AB transition piece PN 16 made of aluminum alloy

DIN 14345 Fire Brigade - Distributor C-DCD, B-CBC and BB-CBC, PN 16

DIN 14355 claw PN 16

DIN 14362

Part 1 suction baskets

DIN 14368 support elbow PN 16

DIN 14375 standpipe PN 16

Part 1 standpipe 2 B

DIN 14380 pressure relief valve, PN 16

DIN 14381 B pressure valve PN 16, self-closing

DIN 14405 fire services - bucket syringes

DIN 14406 portable fire extinguishers , April 1992 partially replaced by DIN EN 3

Part 4 maintenance
- Supplement 1 Information on application

DIN 14420 fire extinguishing pumps - centrifugal fire extinguishing pumps - requirements for the suction and pressure side equipment, testing after installation in the fire engine, since November 2002 partially replaced by DIN EN 1028-1

~~Part 2 portable pumps~~

DIN 14421 pressure gauges (manometers) for fire service pumps

DIN 14423 sieves for pumps and extinguishing water tanks

DIN 14424 fire services - Explosion-proof portable transfer pump with electric motor - Requirements, type and acceptance test

DIN 14425 fire services - Portable submersible motor pumps with electric drive

DIN 14427 fire services - Explosion-proof portable hazardous substance transfer pump (GUP) with electric motor - Requirements, testing

DIN 14452 foam compound container, portable

DIN 14461 fire extinguishing hose connection devices

Part 1 wall hydrant with dimensionally stable hose
Part 2 feed device and extraction device for fire-fighting water pipes "dry"
Part 3 hose connection valves PN 16
Part 4 feed valve PN 16 for extinguishing water pipes
Part 5 Withdrawal fitting PN 16 for extinguishing water pipes
Part 6 wall hydrants with flat hose for trained personnel

DIN 14462 extinguishing water facilities - planning, installation, operation and maintenance of wall hydrant systems as well as systems with above and below ground hydrants

Supplement 1 Pressure control fittings

DIN 14463 extinguishing water systems - Remote-operated filling and emptying stations

Part 1 For wall hydrant systems
Part 2 For water extinguishing systems with empty and pressureless pipe networks; Requirements and test methods
Part 3 ventilation valves PN 16 for extinguishing water pipes

DIN 14464 direct connection stations for sprinkler systems and extinguishing systems with open nozzles - requirements and testing

DIN 14475 powder extinguishing systems for installation in fire engines

~~DIN 14489 sprinkler systems; General principles~~ , rule-maker recommends the application of DIN EN 12845

~~DIN 14494 water spray extinguishing systems, stationary, with open nozzles~~

~~DIN 14495 irrigation of above-ground containers for storing flammable liquids in the event of fire~~

DIN 14497 small extinguishing systems - requirements, testing

DIN 14502 fire fighting vehicles (general requirements), for part 1 see DIN EN 14502-1

Part 3 coloring and special markings

~~DIN 14503 fire brigade trailer, single axle~~ , replaced by DIN 14521 in 2003

DIN 14505 fire trucks - Wechsellader vehicles with roll-off containers - Additional requirements for DIN EN 1846-3

~~DIN 14507 command vehicle~~

~~Part 1 General requirements for command vehicles~~
~~Part 2 command vehicle 1 (ELW 1)~~
~~Part 3 command vehicle 2 (ELW 2)~~
~~Part 4 command vehicle 3 (ELW 3)~~ , withdrawn
~~Part 5 command car (KdoW), called ELF-K until 1999~~

~~DIN 14520 portable pump trailer~~ , withdrawn in 1992

DIN 14521 fire services - trailer with foam water cannon

DIN 14530 fire engines (for parts 1-3 see DIN EN 14530 )

Part 5 Löschgruppenfahrzeug LF 10 (previously 2002–2012 Löschgruppenfahrzeug 10/6 (LF 10/6) or Auxiliary Extinguishing Group Vehicle 10/6 (HLF 10/6), earlier (until 2002) Löschgruppenfahrzeug 8/6 (LF 8/6))
Change A1

~~Part 7 fire fighting vehicle 8 (LF 8)~~

Part 8 Fire fighting vehicle LF 20 KatS for disaster control (previously fire fighting vehicle 16 with portable pump (LF 16-TS))

~~Part 9 fire fighting vehicle 16 (LF 16)~~

~~Part 10 Löschgruppenfahrzeug 24~~ (pre-standard 1987–1991), withdrawn in 1991

Part 11 Löschgruppenfahrzeug LF 20 (until 2005 called Löschgruppenfahrzeug 16/12 (LF 16/12), 2005–2012 (Aid) Löschgruppenfahrzeug 20/6 ((H) LF 20/16))
Change A1

Part 16 portable pump vehicle TSF

Part 17 portable pump vehicle TSF-W

Part 18 TLF 2000 tank tender (since April 2011, earlier (until 1991) tank tender 8/18 (TLF 8/18))

~~Part 20 Fire truck 16/25 (TLF 16/25)~~ , withdrawn in 2005

Part 21 Fire truck TLF 4000 (2005 - April 2011 tank fire truck 20/40 (TLF 20/40 or with special extinguishing agent TLF 20/40-SL), previously tank fire truck 24/50 (TLF 24/50))

Part 22 TLF 3000 tank fire engine (until April 2011 tank fire engine 16/24 with crew (TLF 16/24-Tr))

Part 24 KLF small fire engine (fundamentally revised in 2012)

Part 25 Medium fire fighting vehicle MLF (before September 2012 called relay fire fighting vehicle 10/6 (StLF 10/6))

Part 26 Emergency fire fighting vehicle HLF 10
Change A1

Part 27 Emergency fire fighting group vehicle HLF 20
Change A1

DIN 14555 rescue vehicle and equipment trolley

Part 1 General Requirements
~~Part 2 rescue vehicle 1 (RW 1)~~ , withdrawn in 2002
Part 3 rescue vehicle RW (until 2002 rescue vehicle 2 (RW 2))
~~Part 4 rescue vehicle 3 (RW 3)~~ , withdrawn in 2002
~~Part 10 equipment trolley (GW)~~ , 1974 - May 1990 (withdrawn)
~~Part 11 Oil equipment trolley (GW oil)~~ , August 1978 - May 1990 (withdrawn)
Part 12 Equipment trolley for dangerous goods GW-G (since 2005, October 1990 - October 1997 Equipment trolley for dangerous goods 2 (GW-G 2), October 1997 - April 2005 Equipment trolley for dangerous goods 3 (GW-G 3))
~~Part 13 Equipment trolley for dangerous goods 1 (GW-G 1)~~ , April 1992 - October 1997 (withdrawn in favor of Part 14)
~~Part 14 Equipment trolley for dangerous goods 1 (GW-G 1)~~ , October 1992 - April 2005 (withdrawn)
Part 21 equipment trolley logistics GW-L1
Part 22 equipment trolley logistics GW-L2

~~DIN 14565 hose trolley~~ ~~2000 with crew (SW 2000-Tr)~~ , replaced in 2005 by DIN 14555-22

DIN 14572 exhaust hoses and exhaust hose connections

DIN 14584 Fire fighting vehicles - Drawbars with mechanical drive - Requirements, testing

DIN 14610 Acoustic warning devices for privileged road users

DIN 14620 beacons, signaling units and beacon systems for blue and yellow flashing lights

DIN 14623 orientation signs for automatic fire detectors

DIN 14630 Acoustic warning devices and beacons for privileged road users - requirements and functional principle

DIN 14640 fire services; Headlight mounting, mounting hole, mounting pin, articulation piece

DIN 14642 hand lamp with vehicle bracket, explosion-proof

DIN 14644 spotlights for workplaces for low voltage

DIN 14649 Explosion-proof lights for emergency services

DIN 14661 fire services - Fire service control panel for fire alarm systems

DIN 14662 fire brigade - fire brigade display panel for fire alarm systems

DIN 14663 fire services - fire brigade wireless building control panel

DIN 14664 fire brigade - fire brigade entry point

DIN 14674 fire alarm systems - cross-system networking

DIN 14675 fire alarm systems - construction and operation

Supplement 1 application note

DIN 14676 smoke alarm device for houses, apartments and rooms with similar use - installation, operation and maintenance

DIN 14677 Maintenance of electrically controlled hold-open systems for fire and smoke protection barriers

DIN 14679 fire services - Chargers for trickle charging of starter batteries and additional batteries for special applications - Requirements and testing

DIN 14680 firefighting - hand-operated cable reels and cable reels - alternating current, three-phase current and direct current

DIN 14683 tripod - extendable, with fixed pin

DIN 14685 fire services - portable power generator

Part 1 generator set> = 5kVA
Part 2 generator set <5 kVA

DIN 14686 fire services - control cabinet for permanently installed power generators (generator set)> = 12 kVA for use in fire fighting vehicles

DIN 14687 Fire Brigade - Permanently installed power generator

Part 1 (generator set) <12 kVA for use in fire fighting vehicles

DIN 14690 firefighting - two-pole plug-in device, 16 A, 42 V

Part 1 socket, coupling socket
Part 2 connector

DIN 14691 fire services - multi-pole plug connection - plug connector, coupling, coupling socket

DIN 14700 fire services - CAN interface for components in emergency vehicles

Part 1 basic requirements
Part 2 gateway
Part 3 identification signal unit
Part 4 light pole
Part 5 charger
Part 6 portable pump
Part 7 power generator
Part 8 frequency converter
Part 9 winch
Part 11 powder extinguishing system

DIN 14751 Hydraulically operated rescue equipment for the fire brigade

Part 4 Double-acting hydraulic rescue equipment with an integrated pump and / or energy source
Part 5 Single-acting hydraulic rescue equipment

DIN 14800 fire-fighting equipment for fire-fighting vehicles

Part 4 chimney tool kit
Part 5 multipurpose trains
Part 6 lifting kit with single-acting hydraulic cylinders
Part 9 tool boxes for metal and woodworking
Part 10 sealing box
Part 11 lifting bag accessory box
Part 12 locking tool box
Part 13 traffic accident box
Part 14 Consumables box
Part 15 environmental damage box
Part 16 equipment set for ascending and descending device for easy rescue from heights and depths of up to 30 m
Part 17 equipment set fall protection
Part 18 additional loading sets for fire trucks
- Supplement 1, loading sets A, chainsaw
- Supplement 2 charging set B, electricity
- Supplement 3 loading set C, lighting
- Supplement 4 loading set D, foam
- Supplement 5 loading set E, portable pump PFPN 10-1000
- Supplement 6, loading set F, reciprocating saw
- Supplement 7, load set G, cut-off machine
- Supplement 8 loading set H, water damage
- Supplement 9 loading set I, mechanical drawbar
- Supplement 10 loading kit J, forest fire
- Supplement 11 loading kit K, traffic safety
- Supplement 12 loading modules L, coarse cleaning, decontamination
- Supplement 13, loading kit M, hydraulic rescue kit
- Supplement 14, loading set N, lifting bag system
Part 19 equipment set dangerous goods

~~DIN 14701-2 aerial rescue vehicles; Turntable ladders (DL) with mechanical drive~~ , replaced by DIN EN 14043 in 2006

~~DIN 14702 turntable ladder DL 16-4 with manual drive~~ , withdrawn

~~DIN 14703 attachments conductors (AL)~~ , in 2007 withdrawn

~~DIN 14710-1 wooden hook ladder with foldable hook~~ , replaced by DIN EN 1147 in 2001

~~DIN 14711 ladder~~ , replaced by DIN EN 1147 in 2001

~~DIN 14713 folding ladder~~ , replaced by DIN EN 1147 in 2001

~~DIN 14714 two-piece extension ladder~~ , in 2001 replaced by DIN EN 1147

~~DIN 14715 three-part extension ladder~~ , replaced by DIN EN 1147 in 2001

DIN 14811 fire extinguishing hoses - pressure hoses and bindings for pumps and fire engines

Change A1
Change A2

DIN 14820 hose bridges

Part 1 hose bridges made of wood

DIN 14822 coupling key for fire brigade fittings

Part 1 coupling key BC
Part 2 coupling wrench ABC

DIN 14826 Mobile hose reels

Part 2 one-person reel, connection dimensions, requirements

DIN 14827 fire services - hose baskets

Part 1 hose baskets for pressure hoses B, C and D
Part 2 hose baskets for pressure hoses C and D for quick attack

DIN 14828 cable hose holder

DIN 14830 rescue platform for the fire brigade

DIN 14851 tear hook

DIN 14853 crowbar

DIN 14854 drive-on ramp

DIN 14880 boxes for fire fighting equipment - boxes made of wood, light metal and light metal / wood

DIN 14881 fire brigade tool box

DIN 14885 fire brigade power tool box with up to 1000 V insulated tools

DIN 14900 fire ax with protective bag

DIN 14920 fire fighting leash - requirements, testing, treatment

DIN 14921 multipurpose linen bag

DIN 14922 fire brigade multipurpose bag

DIN 14924 fire brigade ax with protective bag

DIN 14925 fire services; Locking device

DIN 14927 Fire brigade tether with two-pin buckle and snap hook with multifunctional eyelet - requirements, testing, marking

DIN 14941 fire brigade clothing - buttons

DIN 14961 boats for the fire brigade

DIN 14962 fire services - boat trailers

DIN 15000-17999

DIN 15001 cranes; Terms,

Part 1 classification according to type
Part 2 classification according to use

DIN 15002 hoists; Load suspension devices, designations

DIN 15003 hoists; Load suspension devices, loads and forces, terms

DIN 15012 hoists; Pictograms for control elements of command devices

DIN 15018 cranes; Principles for steel structures

Part 1 calculation
Part 2 Principles for the structural development and execution
Part 3 Calculation of mobile cranes

DIN 15019 cranes; Stability

Part 1 Stability for all cranes except trackless mobile cranes and floating cranes
Part 2 Stability for trackless mobile cranes, test load and calculation

DIN 15020 hoists; Principles for rope drives

Part 1 calculation and execution
~~Part 2 Monitoring in use~~ , replaced by DIN ISO 4309

DIN 15021 hoists; Load capacities

DIN 15022 cranes; Lifting heights, working speeds

DIN 15023 cranes; Slewing cranes and gantry cranes with cantilever arms, jibs

DIN 15024 cranes and series hoists; Track center dimensions for two-rail trolleys

DIN 15025 cranes; Sense of operation and arrangement of controls in crane cabins

DIN 15026 hoists; Identification of danger points

DIN 15030 hoists; Acceptance test of crane systems, principles

DIN 15049 cranes with electric hoists or similar hoists; Impellers with plain bearings

DIN 15050 cranes with manual drive; Impellers with roller bearings

DIN 15053 cranes; Gear, connection dimensions, boundary dimensions, output torques

DIN 15055 metallurgical plants and rolling mills and cranes; Pressure oil compression fittings; Application, dimensions, design

DIN 15057 cranes; Closing cover, connection dimensions

DIN 15058 hoists; Axle holder

DIN 15061 cranes; Groove profiles

Part 1 grooved profiles for rope pulleys
Part 2 grooved profiles for rope drums

DIN 15062 cranes; Pulleys

Part 1 selection series and assignment of diameters and overall width dimensions
Part 2 dimensions for hubs and bearings

DIN 15063 hoists; Pulleys, technical delivery conditions

DIN 15069 hoists; Thrust washers

~~DIN 15070 cranes; Calculation basis for impellers~~ , replaced by DIN EN 13001-3-3

DIN 15071 cranes; Calculation of the bearing loads on the impellers

DIN 15072 cranes; Tread profiles of the running wheels and assignment of the crane rails to the running wheel diameter

DIN 15073 cranes; Impellers, overview

DIN 15074 cranes; Impellers with flanges, with plain bearings, without gear rim

DIN 15075 cranes; Impellers with flanges, with plain bearings, with gear rim

DIN 15076 cranes; Wheels with wheel flanges and wheel tires, with plain bearings, without toothed ring

DIN 15077 cranes; Wheels with flanges and wheel tires, with plain bearings, with gear rim

DIN 15078 cranes; Impellers with flanges, with roller bearings, without gear rim

DIN 15079 cranes; Impellers with flanges, with roller bearings, with gear rim

DIN 15080 cranes; Wheels with wheel flanges and wheel tires, with roller bearings, without toothed ring

DIN 15081 cranes; Wheels with flanges and wheel tires, with roller bearings, with gear rim

DIN 15082 cranes; Impellers

Part 1 flange-mounted sprockets
Part 2 running wheels with roller bearings, pressed-on sprockets

DIN 15083 cranes; Wheels, machined tires

DIN 15084 cranes; Impellers with roller bearings, sealing cover

DIN 15085 hoists; Impellers, technical delivery conditions

DIN 15086 cranes; Impellers with roller bearings, flattened inner bushings

DIN 15090 cranes; Driving and tracking sets; Compilation

DIN 15091 cranes; Driving and tracking sets; Impeller shafts

DIN 15092 cranes; Driving and tracking sets; Sealing cap

DIN 15093 cranes; Driving and tracking sets; Impellers

DIN 15094 cranes; Driving and tracking sets; Cage bearing rings

DIN 15095 cranes; Driving and tracking sets; Lock washers, bushings, nipples

DIN 15100 series hoists; Designations

DIN 15105 load hook for hoists; Fret hook

DIN 15106 load hook for hoists; Hook safety device for single hooks

DIN 15112 balancer; Safety requirements and testing

DIN 15141 transport chain; Pallets; Four-way wooden window pallets

Part 4 brewery pallets 1000 mm × 1200 mm

DIN 15142 floor conveyors; Box pallets, stake pallets

Part 1 main dimensions and stacking devices

DIN 15146 four-way flat pallets made of wood

Part 4 800 mm × 600 mm

DIN 15147 flat pallets made of wood; Quality conditions

DIN 15159 Transport chain for trade products - Specific pallet made of thermoplastic material

Part 1 800 mm × 600 mm × 160 mm; mass and weight
Part 2 requirements and tests
Part 3 Auto ID and RFID

DIN 15170 industrial trucks; Trailer hitches; Connection dimensions, requirements, tests

DIN 15172 Power-operated industrial trucks; Tractors and towing industrial trucks; Tractive effort, trailer load

DIN 15185 storage systems with guideline-guided industrial trucks

Part 1: Requirements for floors, shelves and other requirements
Part 2: Personal protection when using industrial trucks in narrow aisles; Safety requirements, testing

DIN 15190 freight container; Inland container

Part 101 main dimensions, corner fittings, tests
Part 102 closed design

DIN 15201 continuous conveyor

Part 1 designations
Part 2 accessory devices; Names, examples of images

DIN 15207 continuous conveyor - support rollers for belt conveyors

Part 1 main dimensions of the idlers for bulk conveyors
Part 2 main dimensions of the support rollers for piece goods conveyors

DIN 15209 continuous conveyor; Buffer rings for buffer ring rollers for belt conveyors

DIN 15210 continuous conveyor; Support rings for support ring rollers for belt conveyors

~~DIN 15221 continuous conveyor; Conveyors with chain elements, exemplary solutions for securing run-up points by means of protective devices~~ , the rule setter recommends the application of DIN EN 618, DIN EN 619, DIN EN 620

DIN 15231 continuous conveyor; Bucket Elevators, Flat Buckets

DIN 15232 continuous conveyor; Bucket elevators, flat-round buckets

DIN 15233 continuous conveyor; Bucket elevators, medium-deep buckets

DIN 15234 continuous conveyor; Bucket elevators, deep buckets with a flat rear wall

DIN 15235 continuous conveyor; Bucket elevators, deep buckets with a curved back wall

DIN 15236 continuous conveyor; Bucket elevators

Part 1 cup attachment to straps
Part 4 bucket attachment to round steel chains

DIN 15237 continuous conveyor; Cup screws and cup washers for fastening components to belts

DIN 15261 continuous conveyor; Screw conveyor

Part 1 connection dimensions
Part 2 snail leaf

DIN 15262 continuous conveyor; Screw conveyors for bulk goods; Calculation principles

DIN 15306 elevators - passenger elevators for residential buildings - structural dimensions, car dimensions, door dimensions

DIN 15309 elevators - passenger elevators for non-residential buildings as well as bed elevators - structural dimensions, car dimensions, door dimensions

~~DIN 15313 elevators - clamping plates, compensating plates for guide rails~~

~~DIN 15315 rope~~ lock, September 2006 replaced by DIN EN 13411-7

DIN 15349 stacker cranes - design criteria and calculation bases for engines

DIN 15350 storage and retrieval machines; Principles for steel structures; Calculations

DIN 15400 load hook for hoists; Mechanical properties, materials, load capacities and existing tensions

DIN 15401 load hook for hoists; Single hook

Part 1 raw parts
Part 2 finished parts with threaded shaft

DIN 15402 load hook for hoists; Double hook

Part 1 raw parts
Part 2 finished parts with threaded shaft

DIN 15403 load hook for hoists; Round thread

DIN 15404 load hook for hoists; Technical delivery conditions for load hooks

Part 1 Technical delivery conditions for forged load hooks
Part 2 Technical delivery conditions for slat hooks

DIN 15405 load hook for hoists; Supervision of the use of load hooks

Part 1 load hook for hoists; Monitoring the use of forged load hooks
Part 2 load hook for hoists; Monitoring the use of slat hooks

DIN 15406 load hook for hoists; Marking of open-die forged load hooks

DIN 15407 load hook for cranes; Lamella single hook for cast iron and steel ladles

Part 1 compilation, main dimensions
Part 2 items

DIN 15408 cranes; Two-wheel bottom blocks; Compilation

DIN 15409 cranes; Four-roller bottom blocks; Compilation

DIN 15410 series hoists; Bottom blocks for electric hoists, single and double sheaves; Compilation

DIN 15411 hoists; Load hook suspensions for bottom blocks

DIN 15412 lower blocks for hoists; Trusses

Part 1 raw parts
Part 2 prefabricated parts

DIN 15413 Bottom blocks for hoists; Load hook nuts

DIN 15414 lower blocks for hoists; Locking pieces

DIN 15417 cranes; Bottom blocks; Form D rope pulleys with plain bearings

DIN 15418 cranes; Bottom blocks; Form C rope pulleys with deep groove ball bearings without inner bush

Part 1 Sheaves of form C with deep groove ball bearings without inner bush
Part 2 spacer bushes for pulleys of form C with deep groove ball bearings without inner bush
Part 3 closing cover for rope pulleys of form C with deep groove ball bearings without inner bush

DIN 15421 cranes; Bottom blocks; Type B rope pulleys with deep groove ball bearings and inner bushing

Part 1 Form B rope pulleys with deep groove ball bearings and inner bush
Part 2 inner bushes and spacer bushes for rope pulleys of form B with deep groove ball bearings and inner bush
Part 3 sealing cover for rope pulleys of form B with deep groove ball bearings and inner bushing

DIN 15422 cranes; Bottom blocks; Form A rope pulleys with cylindrical roller bearings and inner bushes

Part 1 Sheaves of form A with cylindrical roller bearings and inner sleeves
Part 2 inner sleeves and spacer sleeves for rope pulleys of form A with cylindrical roller bearings and inner sleeve
Part 3 closure cover for rope pulleys of form A with cylindrical roller bearings and inner bush

DIN 15428 hoists; Load suspension devices, technical delivery conditions

DIN 15429 hoists; Load suspension devices, monitoring during use

DIN 15430 drive technology; Electro-hydraulic lifting devices; Dimensions and requirements

DIN 15431 drive technology; Brake drums, main dimensions

DIN 15432 drive technology; Brake discs; Main dimensions

DIN 15433 drive technology; Disc brakes

Part 2 brake pads with form-fitting connected brake pad carriers

DIN 15434 drive technology; Drum and disc brakes

Part 1 calculation principles
Part 2 Monitoring in use

DIN 15435 drive technology; Drum brakes

Part 1 dimensions and requirements
Part 2 brake shoes
Part 3 brake pads

DIN 15436 drive technology; Drum and disc brakes; Technical requirements for brake pads

DIN 15437 drive technology; Brake drums and brake discs; Technical delivery conditions

DIN 15450 cranes; Calculation of cardan shafts for driving running sets

DIN 15451 cranes; Cardan shafts

Part 1 connection dimensions
Part 2 flange connections

DIN 15452 cranes; Connection flanges for cardan shafts

DIN 15453 cranes; Cardan shafts, instructions for installation, maintenance, transport and storage

DIN 15460 crane baskets for building materials; Safety requirements

DIN 15502 film 35 mm; Image sizes

Part 1 recording and playback; Aspect ratio 1.37: 1
Part 3 Image size of the recording for universal copying purposes, aspect ratio 1.37: 1
Part 5 copy window for contact copies; Aspect ratio 1.37: 1 and 1.33: 1
Part 6 Recording and playback of silent films, aspect ratio 1.33: 1

DIN 15503 film 35 mm; Optical sound recording; Track positions and slit image

DIN 15507 film 35 mm; Control and full control of optical sound recording in sound films, definition and guidelines for the measurement

DIN 15508 optical sound recording; Difference tone method for measuring non-linear distortions in light sound technology

DIN 15521 film 35 mm; Playback reels

DIN 15530 film 35 mm, film sprockets

Part 1 film sprockets for film 35 mm; Main dimensions, circular arc reference profile
Part 2 Definition of the film support circle diameter for films with widths of 70 mm, 35 mm, 16 mm and 8 mm

DIN 15531 cores for motion picture and magnetic film; Film cores, intermediate core

DIN 15536 daylight cassette for film processing devices, for film widths 16, 32 or 35 mm

DIN 15538 magnetic film 17.5 mm and 35 mm

Part 1 DIN reference films BF 17A, BF 17F and BF 35A

DIN 15540 film 17.5 mm and film 35 mm; Splices

Part 1 film 35 mm, overlapped
Part 2 magnetic film 17.5 mm and magnetic film 35 mm at an angle, butt with adhesive tape
Part 3 film 35 mm, butt with adhesive tape

DIN 15545 film 35 mm; Image sizes, playback, aspect ratio 1.66: 1

DIN 15546 film 35 mm; Image sizes, recording and playback, anamorphic process, screen aspect ratio 2.35: 1

DIN 15549 Image recording materials - Materials for photographs - Condition of storage means

DIN 15551 Radiation-sensitive films - cell horn film (formerly DIN KIN 51)

Part 3 Terms, properties, handling and storage

DIN 15552 magnetic film 17.5 mm and 35 mm

Part 1 material, external presentation
Part 2 single-track sound recording
Part 3 magnetic film 17.5 mm with perforation on one side, two-track sound recording with an identification track
Part 4 Mechanical and electroacoustic requirements

DIN 15554 magnetic film 35 mm

Part 1 four-track sound recording
Part 2 six-track sound recording
Part 3 three-track sound recording

DIN 15560 spotlights for film, television, stage and photography

Part 1 lighting devices (preferably headlights) for incandescent lamps from 0.25 kW to 20 kW and metal halide lamps from 0.125 kW to 18 kW; Optical systems, equipment
Part 2 Fresnel lenses (Fresnel lenses)
~~Part 6 Graphic symbols for studio lights, studio lights, stage lights and stage lights on lighting plans and lighting templates~~
Part 24 headlight and lamp fastening elements, headlight base plate, pipe clamp and spigot, lamp sleeve for photo lights and reportage lights
Part 25 connecting elements and transition pieces
Part 26 attachment points for headlights
~~Part 27 Hand-operated tripods, safety requirements and testing~~
Part 38 insertion devices, colored discs, colored foils, colored disc frames, colored foil frames
~~Part 40 color filters for stage and studio spotlights; Colorimetric parameters~~
~~Part 45 supporting structures, movable lamp hangers and structural elements; Terms~~
~~Part 46 Movable lamp hangers - Constructive and safety requirements~~
~~Part 47 Safety specifications for grid ceilings~~
~~Part 100 special networks and special connectors 250/400 V~~
Part 104 daylight systems up to 4000 W rated power and associated special connectors

~~DIN 15563 special sockets for film and television studios~~

~~Part 3 Single-pole special sockets without protective conductor for external and neutral conductors, ~ 400/230 V 315 A~~
~~Part 4 Single-pole special sockets for the protective conductor~~

~~DIN 15564 special connector for film and television studios~~

~~Part 3 Single-pole special plugs without protective conductor for external and neutral conductors, ~ 400/230 V 315 A~~
~~Part 4 Single-pole special plug for the protective conductor~~

DIN 15566 optical sound film 35 mm; Optical sound scanners; Requirements and information for the measurement

DIN 15568 film 35 mm; Magnetic sound scanners for film projectors, requirements and information for measurement

DIN 15571 projection screen illumination for film projection

Part 1 Luminance requirements and guide values

DIN 15572 sound film reproduction; Frequency response of the optical sound preamplifier

Part 2 measurement method

DIN 15573 studio magnetic film devices for sound recording and playback

Part 1 requirements
Part 2 synchronous signal for coupling magnetic film drives with motion picture generators

DIN 15576 information on cinema and magnetic films

Part 1 winding direction and layer position
Part 2 perforation
Part 3 Information on film cans and boxes for raw and magnetic films
Part 6 Location of image and optical sound track, related to the layer

DIN 15577 frame rate and running speed of motion picture films during recording and playback

DIN 15578 length measurement of motion picture films and magnetic tapes

Part 1 Conversion values and calculation values for perforated cinema films
Part 2 Tables for converting running times 1 to 60 seconds, in film and magnetic tape lengths
Part 3 Tables for converting running times from 1 to 120 minutes, in film and magnetic tape lengths

DIN 15579 film 35 mm - terms for motion picture projectors

Part 1 embodiments
Part 2 projector factory with stepping mechanism and with sound scanning devices

DIN 15583 requirements for motion picture and magnetic films

Part 2 film copies for optical projection

DIN 15586 Testing of mechanical properties of radiation-sensitive materials

Part 2 Determining the Scratch Resistance of Photographic Films
Part 3 Determining the dimensional change of photographic films and papers

DIN 15598 film 35 mm

Part 1 start and end tape, for direct projection

DIN 15602 film 16 mm - image sizes

Part 1 recording and playback; Aspect ratio 1.37: 1
Part 6 Optical Reduction Copying; Basic variables, influencing factors, reproduction scale

DIN 15607 film 16 mm; Control and full control of optical sound recording in sound films, definition and guidelines for the measurement

DIN 15621 film 16 mm; Play reels, reel boxes

DIN 15625 film 16 mm; Film sprockets; Main dimensions, circular arc reference profile

DIN 15630 film 16 mm; Positioning the film in relation to the camera's image window; Position of the reference hole

DIN 15638 magnetic film 16 mm with perforation on one side; DIN reference films BF 16-320 and BF 16-514

DIN 15653 film 16 mm - splices

Part 1 overlaps in a wedge shape
Part 2 magnetic film 16 mm, oblique, blunt with adhesive tape
Part 3 butt with tape

DIN 15655 magnetic film 16 mm with perforation on one side

Part 1 material, external presentation
Part 3 two-track sound recording with an identification track
Part 4 Mechanical and electroacoustic requirements

DIN 15666 film 16 mm; Optical sound scanners; Requirements and information for the measurement

DIN 15668 film 16 mm; Magnetic sound scanners in film projectors, requirements and information for the measurement

DIN 15698 film 16 mm

Part 1 start and end tape for direct projection

DIN 15703 film 70 mm; Image positive with magnetic sound strips

DIN 15708 electronic still picture - control of digital RGB image data

Part 1 output on printers

DIN 15721 film 70 mm; Playback reel

DIN 15730 film 65 mm and film 70 mm; Film sprockets; Main dimensions, circular arc reference profile

DIN 15750 event technology - guidelines for technical services

DIN 15765 event technology - multicore systems for mobile production and event technology

DIN 15766 event technology - single conductor connector system for low-voltage networks AC 400/230 V for mobile production and event technology

DIN 15767 event technology - energy supply in event and production technology

DIN 15780 event technology - LEDs in scenic lighting

DIN 15821 film 8 mm

Part 1 reel spools, reel boxes for film 8 R

DIN 15905 event technology - audio, video and communication sound technology in event venues and multi-purpose halls

Part 1 Requirements for in-house, co- and third-party productions
~~Part 2 cables for audio and video technology use; conditions~~

DIN 15905 event technology-sound technology

Part 5 Measures to avoid a hazard to the audience's hearing due to high noise emissions from electroacoustic sound technology
- Correction 1

DIN 15906 conference venues

DIN 15910 magnetic heads

Part 1 Reference distances and attachments of the magnetic heads for magnetic film and for positive images with magnetic sound strips
Part 2 Electrical and magnetic characteristics with influencing variables; Measurement conditions

DIN 15920 event technology - types of platforms

Part 1 Straight platforms (practicable), corner platforms, slopes, corner slopes made of wood
Part 2 steps and stairs made of wood
Part 4 stage wagon, freely movable
Part 11 Safety specifications for platforms (practicable), slopes, steps, stairs and stage railings made of wood

DIN 15921 Event technology - Platforms and frames made of aluminum - Safety requirements and testing

DIN 15940 picture-sound distances on sound films and sound film devices

DIN 15971 film coding

Part 4 time code on magnetic film 16 mm
Part 10 80-bit time and control code on magnetic film 16 mm and magnetic film 17.5 mm

DIN 15990 developing devices for photographic films and papers in sheet and roll form; Safety requirements

DIN 15991 Devices for copying photographic films; Safety requirements

DIN 15992 film cutting tables, film viewers, rewinding tables and film control devices; Safety requirements

DIN 15995 lamp houses for projectors

Part 1 Safety specifications for the design of lamp houses with high-pressure discharge lamps and for protective equipment

DIN 15996 Image and sound processing in film, video and radio companies - principles and specifications for the workplace

DIN 15999 camera cranes - Use of camera cranes in event and production facilities

DIN 16085 pressure gauges with devices for electrical limit signaling

DIN 16086 Electrical pressure measuring devices - Pressure sensors, pressure transducers, pressure measuring devices - Terms and information in data sheets

DIN 16160 thermometer; Terms

DIN 16167 machine glass thermometer with round housing; Nominal size 160, straight design; Dimensions and display areas

DIN 16168 machine glass thermometer with round housing; Nominal size 160, type 90 ° angled; Dimensions and display areas

DIN 16174 machine glass thermometer with round housing; Nominal size 250, straight design; Dimensions and display areas

DIN 16175 machine glass thermometer with round housing; Nominal size 250, type 90 ° angled; Dimensions and display areas

DIN 16176 machine glass thermometer with round housing; Nominal size 250, type 135 ° angled; Dimensions and display areas

DIN 16181 machine glass thermometer with V-shaped housing; Nominal size 110, straight design; Dimensions and display areas

DIN 16182 machine glass thermometer with V-shaped housing; Nominal size 110, type 90 ° angled; Dimensions and display areas

DIN 16185 machine glass thermometer with V-shaped housing; Nominal size 150, straight design; Dimensions and display areas

DIN 16186 machine glass thermometer with V-shaped housing; Nominal size 150, type 90 ° angled; Dimensions and display areas

DIN 16189 machine glass thermometer with V-shaped housing; Nominal size 200, straight design; Dimensions and display areas

DIN 16190 machine glass thermometer with V-shaped housing; Nominal size 200, type 90 ° angled; Dimensions and display areas

DIN 16191 machine glass thermometer with V-shaped housing; Nominal size 200, design 135 ° angled; Dimensions and display areas

DIN 16195 machine glass thermometer with round or V-shaped housing; Requirements and testing

DIN 16196 dial thermometer with devices for electrical limit signaling - spring and bimetal thermometers

DIN 16230 Measurement, control, regulation; Recording media in strip form for writing measuring apparatus

DIN 16235 Measurement, control, regulation; Electrical measuring devices; Color cages for multi-signal point recorders with 6 detent positions

DIN 16257 nominal positions and position symbols for measuring devices

DIN 16261 shut-off cocks PN 16 with socket-socket connection and socket-spigot connection for pressure gauges

DIN 16262 stop cocks PN 6 and PN 16 with clamping socket and spigot connection for pressure gauges

DIN 16263 shut-off cocks PN 16 with clamping socket, spigot and test connection for pressure gauges

DIN 16270 shut-off valves PN 250 and PN 400 without test connection for pressure gauges

DIN 16271 shut-off valves PN 250 and PN 400 with test connection for pressure gauges (manometer valves)

DIN 16272 shut-off valves PN 250 and PN 400 with separately lockable test connection for pressure gauges

DIN 16281 holder for measuring devices and fittings

DIN 16282 siphons for pressure gauges and their accessories

DIN 16283 clamping sleeves for pressure gauges and their accessories

DIN 16284 nipple connections for pressure gauges and their accessories

DIN 16286 screw plugs with connecting pin G 1/2 B according to DIN EN 837-1

DIN 16287 sealing and protective caps for test connection pins on fittings for pressure gauges

DIN 16500 printing technology (technology of printing); Basic concepts

Part 2 General Terms
Part 11 print finishing; Terms

DIN 16507 printing technology - font sizes, dimensions and terms

Part 1 lead type and related techniques
Part 2 Digital Typesetting and Related Techniques

DIN 16511 correction symbols
DIN 16513 pure toluene as a solvent for gravure printing inks
DIN 16514 printing technology; Terms for high pressure
DIN 16518 classification of fonts according to genera and categories
~~DIN 16519 testing of prints and printing inks~~
- ~~Part 2 Production of standard print samples for optical measurements~~
DIN 16521 printing technology; Lines in typesetting; Dimensions
DIN 16524 Testing of prints and printing inks in printing technology - resistance to various physical and chemical influences
- Part 5 Autoclave sterilization resistance
- ~~Part 6 Behavior of beverage bottle labels against hot cleaning lye, lye penetration and removal time~~
- ~~Part 7 Behavior of beverage bottle labels against hot cleaning lye, lye resistance~~
DIN 16526 Printing inks for printing technology - Identification of properties for sheet-fed offset printing inks on the label
DIN 16527 printing technology
- Part 1 control field, control image, control mark; Basic concepts
- Part 3 control fields; Application in print
DIN 16528 printing technology; Terms for gravure printing
DIN 16529 printing technology; Flat printing terms
~~DIN 16536 Testing of prints and printing inks in printing technology - color density measurement on prints~~
- ~~Part 1 Terms and implementation of the measurement~~
DIN 16544 printing technology; Terms of reproductive technology
~~DIN 16547 screen angles in color screen reproduction~~
DIN 16549 printing technology - prepress
- Part 1 Correction marks for picture and additional information
DIN 16551 envelopes - terms
DIN 16552 rulings for handwriting
- Part 1 General rulings
DIN 16553 printing and reproduction technology; Passport system
DIN 16555 office workstation - Areas for communication workstations in office and administration buildings - requirements, testing
DIN 16557 electronic data exchange for administration, economy and transport (EDIFACT)
- ~~Part 3 General Introduction to Uniform Message Types (UNSMs)~~
- Part 4 Rules for marking UN / EDIFACT transmission files with the eXtensible Markup Language (XML) using Document Type Definitions (DTD's)
- Part 5 Rules for generating XML schema files (XSD) from EDI (FACT) application descriptions (ISO / TS 20625: 2002)
DIN 16560 EDIFACT - application rules
- Part 1 service segments
- Part 15 Use of the service message type AUTACK for the transmission of integrity and authenticity information about sent user data
- Part 16 Use of the service message type KEYMAN for the transmission of security keys and certificates
- Part 17 Use of the message type PRODAT for the transmission of product master data
DIN 16568 EDIFACT - Uniform message type
- Part 3 syntax and service report (CONTRL) for use on versions 1, 2 and 3 of the EDIFACT syntax
DIN 16587 Information technology - Automatic identification and data acquisition procedures - Rectangular extension of the data matrix code
DIN 16604 newspapers - paper formats and ad set dimensions
DIN 16610 printing technology - Through printing - Terms for screen printing
DIN 16611 printing technology - measured variables for screen printing
DIN 16620 printing technology; Printing plates for indirect planographic printing (offset printing)
- Part 2 printing forme production, terms and metrological relationships
- Part 3 Setup and Print; Terms
DIN 16621 printing technology; Printing blankets for indirect planographic printing (offset printing); Terms, requirements, testing, labeling
DIN 16716 Press, injection molding and die casting tools - guide bushes made of steel
DIN 16726 plastic sheeting - tests
DIN 16740 textile glass; Textile glass fabric for electrotechnical purposes, technical delivery conditions
DIN 16741 textile glass; Textile glass fabric tapes with fixed selvedges for electrotechnical purposes, technical delivery conditions
DIN 16742 plastic molded parts - tolerances and acceptance conditions
- Correction 1
~~DIN 16747 roughness of the shaping surfaces of pressing tools and injection molding tools for plastic molding compounds~~
DIN 16759 compression, injection molding and die casting tools - centering sleeves
DIN 16760 compression, injection molding and die casting tools
- Part 1 Machined undrilled plates
DIN 16761 pressing, injection molding and die casting tools - guide pillars
DIN 16764 tool specification sheet
- Part 3 hot runner systems and hot halves
DIN 16765 Press, injection molding and die casting tools - Electrical connections for hot runner tools and tool heating
DIN 16766 injection molding and die casting tools - temperature control systems for liquid media
- Part 1 connection nipple and installation spaces, on the tool side
~~DIN 16769 compression and injection molding tools - components for sprue systems - terms~~ , rule setter recommends the use of DIN ISO 28238
~~DIN 16780 plastic molding compounds; Thermoplastic molding compounds made from polymer mixtures~~
- ~~Part 1 classification and designation~~
- ~~Part 2 production of test specimens and determination of properties~~
~~DIN 16781 plastic molding compounds; Polyoxymethylene (POM) molding compounds~~ , replaced by DIN EN ISO 9988
- ~~Part 2 production of test specimens and determination of properties~~
~~DIN 16782 plastic molding compounds; Polytetrafluoroethylene (PTFE) molding compounds~~
- ~~Part 1 classification and designation~~
- ~~Part 2 production of test specimens and determination of properties~~
DIN 16830 window profiles made of high-impact polyvinyl chloride (PVC-HI)
- Part 1 test method
- Part 2 white; conditions
- Part 3 Profiles with coated, colored surfaces; conditions
- Part 4 Profiles with coated, colored surfaces; Test procedure
DIN 16831 pipe connections and pipe parts for pressure pipes made of polybutene (PB)
- Part 1 angle made of injection molding for socket welding, dimensions
- Part 2 T-pieces made of injection molding for socket welding
- Part 3 sleeves and caps made of injection molding for socket welding, dimensions
- Part 4 reducers made of injection molding for socket welding, dimensions
- Part 5 General quality requirements, testing
- Part 6 electrofusion fittings, dimensions
- Part 7 collars, flanges, gaskets made of injection molding for socket welding, dimensions
~~DIN 16832 pipe connections and fittings for pressure pipelines made of chlorinated polyvinyl chloride (PVC-C) - PVC-C 200~~
- ~~Part 1 dimensions~~
- ~~Part 2 General quality requirements, testing~~
DIN 16833 Pipes made of polyethylene with increased temperature resistance (PE-RT) - PE-RT Type I and PE-RT Type II - General quality requirements, tests
DIN 16834 pipes made of polyethylene with increased temperature resistance (PE-RT) - PE-RT type I and PE-RT type II - dimensions
DIN 16836 multilayer composite pipes - Polyolefin-aluminum composite pipes - General requirements and tests
DIN 16837 multilayer composite pipes - multilayer plastic composite pipes - general requirements and tests
DIN 16838 Thermoplastic materials for pipe connectors - Polyphenylene sulfone (PPSU) - General quality requirements and testing; Text in German and English
DIN 16839 Thermoplastic materials for pipe connectors - Polysulfone (PSU) - General quality requirements and testing; Text in German and English
DIN 16840 Thermoplastic materials for pipe connectors - Polyvinylidene fluoride (PVDF) - General quality requirements and testing; Text in German and English
DIN 16841 Plastics piping systems - Testing of pipes and pipeline parts - Determination of the creep modulus by means of 4-point bending test
DIN 16842 Pipes made of polyethylene (PE) - PE-HD for pressureless applications - General quality requirements, dimensions and tests; Text in German and English
DIN 16867 Pipes, fittings and connections made of glass-reinforced polyester resins (UP-GF) for chemical pipelines; Technical delivery conditions
DIN 16868 pipes made of glass fiber reinforced polyester resin (UP-GF)
- Part 1 wrapped, filled; Dimensions
- Part 2 wrapped, filled; General quality requirements, testing
DIN 16869 pipes made of glass fiber reinforced polyester resin (UP-GF), centrifuged, filled
- Part 1 dimensions
- Part 2 General quality requirements, testing
DIN 16870 pipes made of glass fiber reinforced epoxy resin (EP-GF), wound
- Part 1 dimensions
DIN 16871 pipes made of glass fiber reinforced epoxy resin (EP-GF); thrown, dimensions
~~DIN 16872 pipe connections and pipe parts for pipes made of thermoplastics; Flanges made of glass fiber reinforced polyester resins (UP-GF); Dimensions~~
DIN 16873 Pipes and fittings made of plasticizer-free polyvinyl chloride (PVC-U) for cable protection - dimensions and technical delivery conditions
DIN 16874 pipes made of high density polyethylene (PE-HD) for underground telecommunications - dimensions and technical delivery conditions
DIN 16875 Pipes and fittings made of plasticizer-free polyvinyl chloride (PVC-U) for buried protective pipelines - dimensions and technical delivery conditions
DIN 16876 Pipes and fittings made of high density polyethylene (PE-HD) for underground cable protection pipes - dimensions and technical delivery conditions
DIN 16878 Pipes and fittings made of polypropylene (PP) for underground cable protection pipes - dimensions and technical delivery conditions
DIN 16887 Testing of pipes made of thermoplastics; Determination of the internal pressure creep behavior
DIN 16889 Determination of the chemical resistance factors on pipes made of thermoplastics
- Part 1 pipes made of polyolefins
DIN 16892 pipes made of cross-linked high-density polyethylene (PE-X) - General quality requirements, testing
- Correction 1
DIN 16893 pipes made of cross-linked high density polyethylene (PE-X) - dimensions
- Correction 1
DIN 16894 Pipes made of cross-linked medium density polyethylene (PE-MDX) - General quality requirements, testing
DIN 16895 pipes made of cross-linked medium density polyethylene (PE-MDX) - dimensions
~~DIN 16901 plastic molded parts; Tolerances and acceptance conditions for linear dimensions~~ , withdrawn November 2009; replaced October 2013 by DIN 16742
~~DIN 16903 threaded sockets for plastic molded parts (and die-cast parts)~~
- ~~Part 1 open~~
- ~~Part 2 closed, with disc~~
- ~~Part 3 closed~~
- ~~Part 4 heavy construction~~
DIN 16906 Testing of plastic sheets and plastic films - specimens and test specimens - removal, pretreatment
DIN 16917 Pipes and fittings made of thermoplastics with profiled walls and a smooth inner surface - large pipes over DN 1200 for underground installation
- Part 1 General requirements and performance characteristics
- Part 2 requirements for pipes and fittings
DIN 16922 Flexible sheet-like flat structures produced using plastics; Technological classification
DIN 16928 pipelines made of thermoplastics; Pipe connections, pipe parts, laying, general guidelines
DIN 16940 Plastics - Extruded hoses made of plasticized polyvinyl chloride (PVC-P) - Permissible deviations for dimensions without tolerance specifications
DIN 16941 Extruded profiles made of thermoplastics - general tolerances for dimensions, shape and position
DIN 16944 Glass fiber reinforced reaction resin molded materials; Test procedure
DIN 16945 reaction resins, reaction agents and reaction resin compounds; Test procedure
DIN 16946 reaction resin molding materials; Cast resin molding materials
- Part 1 test method
- Part 2 types
DIN 16960 welding of thermoplastics
- Part 1 principles
DIN 16961 Pipes and fittings made of thermoplastics with profiled walls and a smooth inner pipe surface
- Part 1 dimensions
- Part 2 Technical delivery conditions
DIN 16964 pipes made of glass fiber reinforced polyester resins (UP-GF), wound; General quality requirements, testing
DIN 16965 pipes made of glass fiber reinforced polyester resins (UP-GF), wound
- Part 1 pipe type A; Dimensions
- Part 2 pipe type B; Dimensions
- Part 4 pipe type D; Dimensions
- Part 5 pipe type E; Dimensions
DIN 16966 fittings and connections made of glass fiber reinforced polyester resins (UP-GF)
- Part 1 fittings; General quality requirements, testing
- Part 2 arch; Dimensions
- Part 4 T-pieces, nozzles; Dimensions
- Part 5 reducers; Dimensions
- Part 6 collars, flanges, seals; Dimensions
- Part 7 collars, flanges, flange and laminate connections; General quality requirements, testing
- Part 8 laminate connections; Dimensions
DIN 16982 pipes made of polyamide (PA); Dimensions
DIN 16995 foils for packaging purposes - plastic foils - properties, test methods
DIN 17007 material numbers
- Part 4 Systematics of main groups 2 and 3: Non-ferrous metals
DIN 17014 heat treatment ( hardening ) of metals
- ~~Part 1 heat treatment of ferrous materials; Terms~~ , replaced by DIN EN 10052
- ~~Supplement 2 Foreign-language translation of technical terms~~ , withdrawn February 2008 without replacement
- Part 3 Abbreviation of heat treatments
DIN 17021 heat treatment of ferrous materials
- Part 1 material selection, steel selection based on hardenability
DIN 17022 heat treatment of ferrous materials - method of heat treatment
- Part 1 hardening, bainitizing, tempering and tempering of components
- Part 2 hardening and tempering of tools
- Part 3 case hardening
- Part 4 nitriding and nitrocarburizing
- Part 5 surface hardening
DIN 17023 heat treatment of ferrous materials - heat treatment instructions (WBA) - form
DIN 17052 heat treatment furnaces
- Part 1 Requirements for temperature uniformity
~~DIN 17103 Forgings made of weldable fine-grain structural steels - Technical delivery conditions~~ , replaced by DIN EN 10222-1 and DIN EN 10222-4
DIN 17115 steels for welded round steel chains and individual chain parts - Technical delivery conditions
DIN 17122 conductor rails made of steel, for electric railways; Technical delivery conditions
~~DIN 17175 Seamless tubes made of heat-resistant steels, technical delivery conditions~~ , replaced by DIN EN 10216-2
~~DIN 17221 Hot-rolled steels for heat treatable springs~~ ; April 2003 replaced by DIN EN 10089
~~DIN 17222 Cold-rolled steel strips for springs~~ ; May 2000 replaced by DIN EN 10132-1 and DIN EN 10132-4
~~DIN 17223 round spring steel wire~~
- ~~Part 1 Patented-drawn spring wire made of unalloyed steels~~ ; December 2001 replaced by DIN EN 10270-1
- ~~Part 2 Oil tempered spring steel wire made of unalloyed and alloyed steels~~ ; December 2001 replaced by DIN EN 10270-2
~~DIN 17224 spring wire and spring strip made of stainless steels~~ ; February 2003 replaced by DIN EN 10151 and DIN EN 10270-3
~~DIN 17280 cold-tough steels - technical delivery conditions for sheet metal, strip, wide flat steel, shaped steel, bar steel and forgings~~ , December 1999 replaced by DIN EN 10028, DIN EN 10223 and DIN EN 10269
DIN 17405 Soft magnetic materials for direct current relays; Technical delivery conditions
~~DIN 17410 permanent magnet materials~~ , replaced by DIN EN 60404-8-1
~~DIN 17440 stainless steels~~ , September 2005 replaced by DIN EN 10088-3
~~DIN 17455 Welded circular stainless steel tubes for general requirements~~ , December 2002 replaced by DIN EN 10296-2 and DIN EN 10312
~~DIN 17456 Seamless circular stainless steel tubes for general requirements~~ , February 2006 replaced by DIN EN 10297-2
~~DIN 17457 Welded circular tubes made of austenitic stainless steels for special requirements~~ , May 2005 replaced by DIN EN 10217-7
DIN 17470 heat conductor alloys; Technical delivery conditions for round and flat wires
DIN 17471 resistance materials
DIN 17560 ferrosilicon and silicon
- Part 1 Technical delivery conditions for ferrosilicon
- Part 2 Technical delivery conditions for silicon
DIN 17561 Ferromolybdenum - Technical delivery conditions
DIN 17562 Ferro tungsten - Technical delivery conditions
DIN 17563 Ferrovanadium - Technical delivery conditions
DIN 17564 ferromanganese, ferromanganese-silicon and manganese - technical delivery conditions
DIN 17565 Ferrochrome, Ferrochrome-Silicon and Chromium - Technical delivery conditions
DIN 17566 Ferrochrome, Ferrochrome-Silicon and Chromium - Technical delivery conditions
DIN 17567 Ferroboron - Technical delivery conditions
DIN 17569 Ferroniob - Technical delivery conditions
DIN 17580 calcium silicon - technical delivery conditions
DIN 17611 Anodized products made of aluminum and wrought aluminum alloys - Technical delivery conditions
DIN 17640
- Part 1 lead alloys for general use
DIN 17730 Nickel and nickel-copper cast alloys; Castings
DIN 17740 nickel in semi-finished products - composition
DIN 17741 Low-alloy wrought nickel alloys - Composition
DIN 17742 wrought nickel alloys with chromium - composition
DIN 17743 Wrought nickel alloys with copper composition
DIN 17744 wrought nickel alloys with molybdenum and chromium - composition
DIN 17745 wrought alloys of nickel and iron - composition
DIN 17750 strips and sheets made of nickel and wrought nickel alloys - properties
DIN 17751 Pipes made of nickel and wrought nickel alloys - Properties
DIN 17752 rods made of nickel and wrought nickel alloy - properties
DIN 17753 wires made of nickel and wrought nickel alloys - properties
DIN 17850 titanium; Chemical composition
DIN 17851 titanium alloys; Chemical composition
DIN 17860 strips and sheets made of titanium and titanium alloys - technical delivery conditions
DIN 17861 Seamless circular tubes made of titanium and titanium alloys; Technical delivery conditions
DIN 17862 bars made of titanium and titanium alloys - Technical delivery conditions
DIN 17863 wires made of titanium
DIN 17864 forgings made of titanium and wrought titanium alloys (open-die and drop forged parts) - technical delivery conditions
DIN 17865 castings made of titanium and titanium alloys; Investment casting, compact casting
DIN 17866 Welded circular tubes made of titanium and titanium alloys; Technical delivery conditions
DIN 17869 material properties of titanium and titanium alloys; Additional information

DIN 18000-18499

~~DIN 18000 module regulation in construction~~
~~DIN 18004 Applications of construction products in structures - test methods for aggregates according to DIN V 20000-103 and DIN V 20000-104 (pre-standard)~~
DIN 18005 noise protection in urban development
- Part 1 Basics and information for planning
  - Supplement 1 calculation method; Acoustic orientation values for urban planning
- Part 2 noise maps; Map representation of noise immissions
DIN 18007 demolition work - terms, procedures, areas of application
DIN 18008 Glass in building - design and construction rules
- Part 1 Terms and general principles
- Part 2 Glazing arranged in lines
  - Correction 1
- Part 3 point-shaped glazing
- Part 4 additional requirements for fall-proof glazing
- Part 5 additional requirements for walk-on glazing
DIN 18009 fire protection engineering
- Part 1 principles and rules for application
~~DIN 18011 parking spaces, distances and movement areas in residential construction~~ , January 1991 withdrawn without replacement
DIN 18012 House connection equipment in buildings - space and area requirements - planning principles
DIN 18013 niches for meter positions (electricity meters)
DIN 18014 foundation earth electrode
DIN 18015 electrical systems in residential buildings
- Part 1 planning principles
- Part 2 Type and scope of the minimum equipment
- Part 3 Cable routing and arrangement of the equipment
- Part 4 building system technology
- Part 5 Airtight and thermal bridge-free electrical installation
DIN 18017 ventilation of bathrooms and toilet rooms without external windows
- ~~Part 1 single shaft systems without fans~~
- Part 3 with fan
~~DIN 18022 kitchens, bathrooms and toilets in residential buildings, planning principles~~ , withdrawn in 2007 without replacement
DIN 18024 Barrier-free building
- ~~Part 1 streets, squares, paths, public transport and green spaces as well as playgrounds; Planning principles~~
- ~~Part 2 Publicly accessible buildings and workplaces, planning principles~~ ; Replaced in 2010 by DIN 18040-1
~~DIN 18025 Barrier-free apartments~~ , replaced by DIN EN 81-70
- ~~Part 1 apartments for wheelchair users; Planning principles~~
- ~~Part 2 planning principles~~
DIN 18032 sports halls - halls and rooms for sports and multi-purpose use
- Part 1 principles for planning
- Part 3 Examination of the ball impact safety
- Part 4 double-shell partition curtains
- ~~Part 5 extendable grandstands~~
- Part 6 Structural measures for the installation and anchoring of sports equipment
DIN 18034 Playgrounds and open spaces for playing - Requirements for planning, construction and operation
DIN 18035 sports fields
- Part 1 outdoor facilities for games and athletics, planning and dimensions
- Part 2 irrigation
- Part 3 drainage
  - Correction 1
- Part 4 lawns
- Part 5 tennis courts
- Part 6 plastic surfaces
- Part 7 synthetic turf systems
- ~~Part 8 athletics facilities~~
DIN 18036 Ice sports facilities - Systems for ice sports with artificial ice surfaces - Basics for planning and construction
DIN 18040 Barrier-free building - planning principles
- Part 1 Publicly accessible buildings
- Part 2 apartments
- Part 3 Public transport and open space
DIN 18041 audibility in rooms - requirements, recommendations and information for planning
DIN 18055 windows; Joint permeability, driving rain tightness and mechanical stress; Requirements and testing
DIN 18057 concrete windows - dimensioning, requirements, tests
DIN 18065 building stairs - definitions, measures, main dimensions
DIN 18089 fire barriers
- Part 1 inserts for fire doors; Mineral fiber boards; Concept, designation, requirements, testing
DIN 18090 elevators - lift shaft revolving and folding doors for lift shafts with walls of fire resistance class F 90
DIN 18091 elevators; Shaft sliding doors for lift shafts with walls of fire resistance class F 90
DIN 18092 elevators; Vertical sliding doors for small goods lifts in lift shafts with walls of fire resistance class F 90
DIN 18093 fire barriers; Installation of fire doors in solid walls made of masonry or concrete; Anchor positions, anchor shapes, installation
DIN 18095 smoke
protection doors
- Part 1 terms and requirements
- Part 2 type test of long-term functionality and tightness
- Part 3 Application of test results

DIN 18100 doors; Wall openings for doors; Dimensions according to DIN 4172

DIN 18101 Doors - Doors for residential construction - Door leaf sizes, hinge seat and lock seat - Mutual dependency of dimensions

DIN 18104 burglar-resistant retrofit products

Part 1 Screw-on retrofit products for windows and doors - Requirements and test methods
Part 2 Retrofit products for windows and doors embedded in the rebate - Requirements and test methods

DIN 18111 door frames - steel frames
- Part 1 standard frames for rebated doors in masonry walls
- Part 2 standard frames for rebated doors in stud walls
- Part 3 special frames for rebated and unrebated door leaves
- Part 4 Installation of steel frames
DIN 18121 investigation of soil samples - water content
- ~~Part 1 Determination by oven drying~~
- Part 2 Determination by express method
DIN 18122 subsoil , investigation of soil samples - state limits (consistency limits )
- Part 1 Determination of the flow and sheeting limit
- Part 2 Determination of the shrinkage limit
DIN 18123 subsoil, investigation of soil samples - determination of the grain size distribution
DIN 18124 subsoil, investigation of soil samples - determination of grain density - capillary pycnometer, wide neck pycnometer, gas pycnometer
DIN 18125 subsoil, investigation of soil samples - determination of the density of the soil
- ~~Part 1 laboratory tests~~
- Part 2 field trials
DIN 18126 subsoil, investigation of soil samples - Determination of the density of non-cohesive soils in the most loose and densest storage
DIN 18127 subsoil, investigation of soil samples - Proctor test
DIN 18128 subsoil - investigation of soil samples - determination of loss on ignition
DIN 18129 subsoil, investigation of soil samples - determination of the lime content
DIN 18130 Subsoil - Investigation of soil samples; Determination of the water permeability coefficient
- Part 1 laboratory tests
- Part 2 field trials
DIN 18132 subsoil, experiments and experimental devices - Determination of the water absorption capacity
DIN 18134 subsoil - tests and experimental devices - plate pressure test
DIN 18135 subsoil - investigation of soil samples - one-dimensional compression test
DIN 18136 subsoil - investigation of soil samples - uniaxial compression test
DIN 18137 subsoil, investigation of soil samples - determination of shear strength
- Part 1 Terms and basic test conditions
- Part 2 triaxial test
- Part 3 Direct shear test
- ~~Part 4 wing shear tests~~
DIN 18141 subsoil - investigation of rock samples
- Part 1 Determination of the uniaxial compressive strength
DIN 18148 hollow wall panels made of lightweight concrete
~~DIN 18150 building materials and components for house chimneys; Fittings made of lightweight concrete, single-shell chimneys~~ , regulators recommend the use of DIN EN 1858
- ~~Part 1 requirements~~
- ~~Part 2 testing and monitoring~~
~~DIN 18156 materials for ceramic cladding in the thin bed process~~
DIN 18157 Execution of ceramic linings in the thin bed process
- Part 1 Hydraulically setting thin-bed mortar
- Part 2 dispersion adhesives
- Part 3 epoxy resin adhesives
DIN 18158 floor clinker plates
DIN 18159 foam plastics as in-situ foams in construction; Urea-formaldehyde resin in-situ foam for thermal insulation
- Part 2 application, properties, execution, testing
DIN 18160 exhaust systems
- Part 5 facilities for chimney sweeping work - requirements, planning and execution
- Part 60 Evidence for the fire behavior of exhaust systems and components of exhaust systems - terms, requirements and tests
DIN 18162 wall panels made of lightweight concrete, unreinforced
DIN 18168 plasterboard ceiling linings and suspended ceilings
- Part 1 requirements for execution
DIN 18168 plasterboard ceiling linings and suspended ceilings
- Part 2: Verification of the load-bearing capacity of substructures and hangers made of metal
DIN 18177 Mineral tiles manufactured in the factory using the wet process - characteristic values and test methods
DIN 18180 plasterboard - types and requirements
DIN 18181 plasterboard in building construction - processing
DIN 18182 accessories for processing plasterboard
- Part 1 profiles made of sheet steel
- Part 2 drywall screws, staples and nails
DIN 18183 partition walls and cladding made of plasterboard with metal substructures
- Part 1 cladding with plasterboard
DIN 18184 gypsum board composite elements with polystyrene or polyurethane hard foam as insulation
~~DIN 18190 waterproofing membranes for building waterproofing; Sealing membranes with metal tape insert~~
- ~~Part 4 Concept, designation, requirements~~
~~DIN 18192 Solidified polyester fleece as an insert for bitumen and polymer bitumen sheeting; Concept, designation, requirements, testing~~
DIN 18195 building waterproofing
- Supplement 1 Examples for the arrangement of the seal
- Part 1 principles, definitions, assignment of the types of sealing
- Part 2 fabrics
- Part 3 Requirements for the substrate and processing of the substances
- Part 4 Seals against soil moisture and non-standing seepage water on floor slabs and walls, dimensioning and execution
- Part 5 Seals against non-pressing water on ceiling surfaces and in wet rooms; Dimensioning and execution
- Part 6 Seals against external pressing water and standing seepage water; Dimensioning and execution
- Part 7 seals against from inside pressing water; Dimensioning and execution
- Part 8 seals over movement joints
- Part 9 penetrations, transitions, connections and terminations
- Part 10 protective layers and protective measures
DIN 18196 Earthworks and foundation engineering - Soil classification for structural purposes
DIN 18197 Sealing of joints in concrete with waterstops
DIN 18200 conformity certificate for construction products - in-house production control, external monitoring and certification of products
~~DIN 18201 tolerances in building construction, terms, principles, application, testing~~ , replaced by DIN 18202
DIN 18202 tolerances in building construction - structures
DIN 18203 tolerances in building construction
- ~~Part 1 Prefabricated parts made of concrete , reinforced concrete and prestressed concrete~~
- ~~Part 2 Prefabricated parts made of steel~~
- Part 3 components made of wood and wood-based materials
DIN 18204 Space-enclosing components made of textile fabrics and foils (tent tarpaulins) for halls and tents
- Part 1 PVC-coated polyester fabric
DIN 18205 requirements planning in construction
~~DIN 18215 formwork panels made of wood, for concrete and reinforced concrete structures; Standard dimensions 0.50 m × 1.50 m, thickness 21 mm~~
DIN 18216 formwork anchor for concrete formwork; Requirements, testing, use
DIN 18217 concrete surfaces and formwork skin
DIN 18218 fresh concrete pressure on vertical formwork
DIN 18225 industrial construction; Traffic routes in industrial buildings
- Supplement 1 Regulations
DIN 18230 Structural fire protection in industrial buildings
- Part 1 Calculated fire resistance duration
- ~~Part 2 Determination of the charring behavior of materials in storage arrangement - values for the charring factor m~~
- Part 3 calculated values
DIN 18232 smoke and heat exemption (including RWA )
- Part 1 terms, task
- Part 2 Natural smoke extraction systems (NRA); Dimensioning, requirements and installation
- Part 4 heat exhausts (WA); Test procedure
- Part 5 Mechanical smoke extraction systems (MRA); Requirements, dimensioning
- Part 7 heat exhausts from fusible materials - assessment method and installation
- Part 9 Essential characteristics and their minimum values for natural smoke and heat ventilation devices according to DIN EN 12101-2
DIN 18234 Structural fire protection of large roofs - fire exposure from below
- Part 1 terms, requirements and tests; Closed roof areas
- Part 2 List of roofs that meet the requirements of DIN 18234-1; Closed roof areas
- Part 3 Terms, requirements and tests, penetrations, connections and closures of roof surfaces
- Part 4 List of penetrations, connections and closures of roof surfaces that meet the requirements of DIN 18234-3
DIN 18250 locks - Mortise locks for fire and smoke protection doors
DIN 18251 locks - mortise locks
- Part 1 mortise locks for rebated doors
- Part 2 mortise locks for tubular frame doors
- Part 3 mortise locks as multi-point locking
DIN 18252 profile cylinder for door locks
DIN 18255 building fittings - door handles, door plates and door rosettes - terms, dimensions, requirements, labeling
DIN 18257 Building fittings - Security fittings - Terms, dimensions, requirements, labeling
~~DIN 18262 Adjustable, non-load-bearing spring hinge for fire doors~~
DIN 18263 locks and building hardware - door closers with controlled closing sequence
- Part 1 overhead door closer with crank mechanism and spiral spring
- Part 4 swing door drives with self-closing function
DIN 18264 building hardware; Door hinges with spring
DIN 18265 building hardware; Swing door hinges with spring
DIN 18267 window handles - Snap-in, lockable and lockable window handles
DIN 18268 building hardware; Door hinges; Band reference line
DIN 18272 fire barriers; Hinges for fire doors; Spring band and construction band
DIN 18273 Building Fittings - Lever handle sets for fire doors and smoke doors - Terms, dimensions, requirements and tests
DIN 18299 VOB procurement and contract regulations for construction works - Part C: General technical contract conditions for construction works (ATV) - General regulations for construction work of all kinds
DIN 18300 earthworks
DIN 18301 drilling work
DIN 18302 work on the expansion of boreholes (formerly: well construction work)
DIN 18303 sheeting work
DIN 18304 pile driving, vibrating and pressing work (formerly: pile driving)
DIN 18305 drainage works
DIN 18306 drainage canal works
DIN 18307 pressure pipeline work outside of buildings (formerly: pressure pipeline work in the ground)
DIN 18308 drainage work
DIN 18309 press-in work
~~DIN 18310 Securing work on bodies of water, dykes and coastal dunes~~ , withdrawn
DIN 18311 dredging work
DIN 18312 underground construction work
DIN 18313 diaphragm wall work with supporting fluids
DIN 18314 shotcrete work
DIN 18315 traffic route construction work - superstructure layers without binding agents
DIN 18316 traffic route construction work - superstructure layers with hydraulic binders
DIN 18317 traffic route construction work - pavement layers made of asphalt
DIN 18318 traffic route construction work - paving slabs and slab coverings in unbound execution, edging
DIN 18319 pipe jacking work
DIN 18320 landscaping work
DIN 18321 jet work
DIN 18322 cable line underground engineering
DIN 18323 ordnance clearance work
DIN 18325 track construction work
DIN 18326 renovation work on drainage channels
DIN 18329 VOB procurement and contract regulations for construction works - Part C: General technical contract conditions for construction works (ATV) - traffic safety work
DIN 18330 masonry work
DIN 18331 concrete and reinforced concrete work
DIN 18332 natural stone work
DIN 18333 cast stone work
DIN 18334 carpentry and wood construction
DIN 18335 steel construction work
DIN 18336 sealing work
DIN 18338 roofing and waterproofing work
DIN 18339 plumbing work
DIN 18340 drywall work
DIN 18345 thermal insulation composite systems
DIN 18349 concrete maintenance work
DIN 18350 plastering and stucco work
DIN 18351 Curtain-type, rear-ventilated facades
DIN 18352 tile and slab work
DIN 18353 screed work
DIN 18354 mastic asphalt work
DIN 18355 carpentry work
DIN 18356 parquet and wood paving work
DIN 18357 hardware work
DIN 18358 roller shutter work
DIN 18360 metal construction
DIN 18361 glazing work
DIN 18363 painting and varnishing work - coatings
DIN 18364 corrosion protection work on steel and aluminum structures
DIN 18365 flooring work
DIN 18366 wallpapering work
~~DIN 18367 wood paving work~~ , replaced by DIN 18356
DIN 18379 air conditioning systems
DIN 18380 heating systems and central water heating systems
DIN 18381 gas, water and drainage systems within buildings
DIN 18382 low and medium voltage systems with nominal voltages up to 36 kV
DIN 18384 lightning protection systems
DIN 18385 conveyor systems, elevator systems, escalators and moving walks
DIN 18386 building automation
DIN 18421 insulation work on technical systems
DIN 18451 scaffolding work
DIN 18459 demolition and dismantling work
DIN 18462 pipe bends for circular downpipes; exam

DIN 18500-18999

~~DIN 18500~~ cast stone, replaced by DIN EN 13748
~~DIN 18501 concrete paving stones~~ , replaced by DIN EN 1338
~~DIN 18502 natural stone paving stones~~ , replaced by DIN EN 1342
DIN 18503 paving clinker - requirements and test methods
DIN 18507 paving stones made of porous concrete - terms, requirements, tests, monitoring
DIN 18515 external wall cladding
- Part 1 Grouted tiles or slabs - principles for planning and execution
- ~~Part 2 walling on contact areas - principles for planning and execution~~
DIN 18516 exterior wall cladding, rear-ventilated
- Part 1 requirements, test principles
- Part 3 natural stone, requirements, dimensions
- Part 4 toughened safety glass - requirements, dimensioning, testing
- Part 5 cast stone - requirements, dimensioning
~~DIN 18530 Solid ceiling structures for roofs; Planning and execution~~
DIN 18531 sealing of roofs as well as balconies, loggias and arcades
- Part 1 Unused and used roofs - requirements, planning and execution principles
- Part 2 Unused and used roofs - fabrics
- Part 3 Unused and used roofs - selection, design and details
- Part 4 Unused and used roofs - maintenance
- Part 5 balconies, loggias and arcades
DIN 18532 Sealing of concrete traffic areas
- Part 1 Requirements, planning and execution principles
- Part 2 Sealing with a layer of polymer bitumen welding membrane and a layer of mastic asphalt
- Part 3 sealing with two layers of polymer bitumen sheeting
- Part 4 sealing with a layer of plastic or elastomer membrane
- Part 5 sealing with a layer of polymer bitumen membrane and a layer of plastic or elastomer membrane
- Part 6 Sealing with liquid sealants
DIN 18533 sealing of components in contact with the ground
- Part 1 Requirements, planning and execution principles
- Part 2 sealing with sheet-like sealing materials
- Part 3 Sealing with liquid sealants
DIN 18534 sealing of interiors
- Part 1 Requirements, planning and execution principles
- Part 2 sealing with sheet-like sealing materials
- Part 3 sealing with liquid-processed sealing materials in combination with tiles and slabs (AIV-F)
- Part 4 Sealing with mastic asphalt or asphalt mastic
- Part 5 sealing with sheet-like sealing materials in combination with tiles and slabs (AIV-B)
- Part 6 sealing with panel-shaped sealing materials in combination with tiles and slabs (AIV-P)
DIN 18535 sealing of containers and basins
- Part 1 Requirements, planning and execution principles
- Part 2 sealing with sheet-like sealing materials
- Part 3 Sealing with liquid sealants
DIN 18540 Sealing of external wall joints in building construction with joint sealants
DIN 18541 Joint tapes made of thermoplastics for sealing joints in in-situ concrete
- Part 1 Terms, shapes, dimensions, labeling
- Part 2 Requirements for the materials, testing and monitoring
DIN 18542 Sealing of external wall joints with impregnated joint sealing tapes made of foam plastic - Impregnated joint sealing tapes - Requirements and testing
DIN 18545 Sealing of glazing with sealants - Requirements for glass rebates and glazing systems
DIN 18550 Planning, preparation and execution of interior and exterior plasters
- Part 1 Supplementary specifications to DIN EN 13914-1 for external plasters
- Part 2 Supplementary specifications for DIN EN 13914-2 for interior plasters
DIN 18551 shotcrete - National application rules for the DIN EN 14487 series and rules for the dimensioning of shotcrete structures
~~DIN 18554 testing of masonry~~
- ~~Part 1 Determination of compressive strength and modulus of elasticity~~
DIN 18555 Testing of mortars with mineral binders
- Part 3 solid mortar; Determination of flexural strength, compressive strength and bulk density
- Part 4 solid mortar; Determination of longitudinal and transverse expansion as well as deformation parameters of masonry mortar in the static compression test
- Part 6 solid mortar; Determination of the adhesive tensile strength
- Part 7 fresh mortar; Determination of the water retention capacity using the filter plate method
- Part 9 solid mortar; Determination of the joint compressive strength
DIN 18558 synthetic resin plasters; Terms, requirements, execution
DIN 18560 screeds in construction
- Part 1 General requirements, testing and execution
- Part 2 screeds and heated screeds on insulating layers (floating screeds)
  - Correction 1
- Part 3 composite screeds
- Part 4 screeds on separation layer
- Part 7 heavy-duty screeds (industrial screeds)
DIN 18581 Instructions for in-house production control for CE marking (conformity verification procedure 2+) of masonry mortar after suitability test
DIN V 18599 Energetic evaluation of buildings - calculation of the useful, final and primary energy requirement for heating, cooling, ventilation, drinking water and lighting (pre-standard based on 2002/91 / EG and the EeG and subsequently the EnEV )
- Part 1 General accounting procedures, terms, zoning and evaluation of energy sources
- Part 2 useful energy demand for heating and cooling of building zones
- Part 3 Usable energy requirements for energetic air treatment
- Part 4 Usable and final energy requirements for lighting
- Part 5 final energy demand of heating systems
- Part 6 Final energy requirements of residential ventilation systems and air heating systems for residential construction
- Part 7 Final energy requirements of ventilation and air conditioning systems for residential construction
- Part 8 Useful and final energy requirements of water heating systems
- Part 9 Final and primary energy requirements of combined heat and power plants
- Part 10 boundary conditions of use, climate data
- Part 100 changes to DIN V 18599-1 to DIN V 18599-10 (should be included in a new version of DIN 18599-1 to 18599-10 at the end of 2011 and are only part of the energetic assessment of buildings according to EnEV )
DIN 18650 locks and building hardware - automatic door systems
- Part 1 product requirements and test methods
- Part 2 Security on automatic door systems
DIN 18702 signs for surveying plans, large-scale maps and plans
DIN 18703 leveling staff
DIN 18708 height bolts
DIN 18709 terms, abbreviations and symbols in surveying
- Part 1 General
- Part 2 engineering surveying
- Part 3 water survey
- Part 4 Adjustment Calculation and Statistics
- Part 5 Evaluation of continuous measurement series
- Part 6 Geodetic reference systems and reference surfaces
DIN 18710 engineering surveying
- Part 1 General Requirements
  - Correction 1
- Part 2 recording
- Part 3 staking out
- Part 4 surveillance
DIN 18716 photogrammetry and remote sensing - terms
- Change A1
DIN 18719 Geodetic instruments; Forced centering, spigot and receptacle
DIN 18723 field method for the accuracy investigation of geodetic instruments
- Part 1 General
- ~~Part 2 levels~~
- ~~Part 3 theodolites~~
- ~~Part 4 Optical rangefinder~~
- ~~Part 5 solder instruments~~
- ~~Part 6 Electro-optical distance meters for close range~~
- Part 7 surveying gyro
- ~~Part 8 rotating laser~~
DIN 18726 stands for geodetic instruments
DIN 18740 photogrammetric products
- Part 3 requirements for the ortho image
- Part 4 Requirements for digital aerial cameras and digital aerial photographs
- Part 5 Requirements for the classification of optical remote sensing data
- Part 6 Requirements for digital elevation models
- Part 7 Requirements for pan-sharpening
DIN 18799 Fixed ladders on structures
- Part 1 fixed ladders with side rails, safety requirements and tests
- Part 2 fixed ladders with central spar, safety requirements and tests
~~DIN 18800 steel construction~~
- ~~Part 1 dimensioning and construction~~ , replaced by DIN EN 1993
- ~~Part 2 Stability cases, buckling of bars and frameworks~~ , replaced by DIN EN 1993
- ~~Part 3 stability cases, plate dents~~ , replaced by DIN EN 1993
- ~~Part 4 Stability cases, shell dents~~ , replaced by DIN EN 1993
- ~~Part 5 composite structures made of steel and concrete - dimensioning and construction~~ , replaced by DIN EN 1994
- ~~Part 7 Execution and manufacturer~~ qualification, regulators recommend the application of DIN EN 1090-2
~~DIN 18801 structural steelwork; Dimensioning, construction, production~~ , replaced by DIN EN 1993
DIN 18807 trapezoidal profiles in building construction
- ~~Part 1 General requirements, determination of the load-bearing capacity values by calculation~~
- Part 3 steel trapezoidal profiles; Proof of strength and structural training
  - Change A1
- Part 9 aluminum trapezoidal profiles and their connections; Application and construction
~~DIN 18820 laminates made from textile glass-reinforced unsaturated polyester and phenacrylate resins for load-bearing components (GF-UP, GF-PHA)~~
- ~~Part 1 structure, manufacture and properties~~
- ~~Part 2 Physical characteristics of the standard laminates~~
- ~~Part 3 Protective measures for the load-bearing laminate~~
- ~~Part 4 testing and quality control~~
DIN 18851 large kitchen appliances - stoves - requirements and testing
DIN 18852 Large kitchen appliances - Roasting and grilling appliances - Requirements and testing
DIN 18854 large kitchen appliances - deck-mounted roasting and baking ovens, confectionery baking ovens (patisserie) - requirements and testing
DIN 18855 large kitchen appliances
- Part 1 Double-walled cooking kettles and pressure cooking kettles with pressureless cooking space - requirements and testing
- Part 2 pressure cooker, requirements and testing
DIN 18856 large kitchen appliances - deep fryers - requirements and testing
DIN 18857 large kitchen appliances
- Part 1 tilting frying pans; Requirements and testing
- Part 2 standing frying pans, requirements and testing
- Part 3 Kipp pressure cooking pans, requirements and testing
- Part 4 Free-standing pressure cooking pans, requirements and testing
DIN 18858 large kitchen appliances - salamanders and gyros grills - requirements and testing
DIN 18860 large kitchen appliances - work tables
- Part 1 Open work tables; Requirements and testing
- Part 2 work tables with cupboard substructures; Requirements and testing
DIN 18861 large kitchen appliances - sinks and sinks
- Part 1 sink units; Requirements and testing
- Part 2 sink; Requirements and testing
- Part 3 hand wash basin, requirements and testing
- Part 4 Sinks, requirements and testing
- Part 5 hand wash basin combination, requirements and testing
DIN 18862 Large kitchen appliances - Machines for roasting and grilling; Requirements and testing
- Part 1 short-term roasts
- Part 2 long frying pieces
DIN 18863 Large kitchen appliances - Machines and devices for cooking and preparation under steam pressure - Requirements and testing
DIN 18864 large kitchen appliances - thermal containers for food transport
DIN 18865 large kitchen appliances - dispensing systems
- Part 1 dimensions, requirements, testing
- Part 2 warm issues
- Part 3 distribution tables (neutral devices)
- Part 4 structures heated or unheated
- Part 5 tray slides
- Part 6 built-in stacking devices (heated or unheated)
- Part 7 cold output devices (cooling devices)
- Part 8 superstructures, cooled
- Part 9 Cabinet interiors in standard and hygienic design
- Part 10 cash register modules - requirements and testing
DIN 18866 Large kitchen appliances - Hot air circulation appliances and hot air steamers - Requirements and testing
DIN 18867 Large kitchen appliances - Mobile appliances
- Part 1 serving trolleys, requirements and testing
- Part 2 shelf trolleys, requirements and testing
- Part 3 tray and container trolleys, requirements and testing
- Part 4 tray clearing trolleys, requirements and testing
- Part 5 heated banquet trolleys, requirements and testing
- Part 6 Banquet trolleys cooled, requirements and testing
- Part 7 Food serving trolleys, requirements and testing
- Part 8 roles, requirements and testing
- Part 9 stacking devices (neutral, heated or cooled), requirements and testing
DIN 18868 canteen kitchen appliances - non-thermal interior components
- Part 1 cabinets; Dimensions, requirements, testing
- Part 2 shelves; Dimensions, requirements, testing
DIN 18869 large kitchen appliances - devices for ventilation of commercial kitchens
- Part 1 Kitchen ventilation hoods, requirements and testing
  - Correction 1
- Part 2 Kitchen ventilation ceilings, requirements and testing
  - Correction 1
- Part 3 air outlets, requirements and testing
  - Correction 1
- Part 4 air lines, design and dimensioning
- Part 5 separators, requirements and testing
- Part 6 Installation and operation of stationary fire extinguishing systems
  - Correction 1
- Part 7 Systems for aerosol and aerosol treatment, requirements and testing
DIN 18870 large kitchen appliances - limit values for exhaust gas losses
DIN 18871 Large kitchen appliances - Thermal equipment components
- Part 1 dish warming cabinets - requirements and testing
- Part 2 heated wells - requirements and testing
- Part 3 water baths - requirements and testing
- Part 4 pasta cooker, requirements and testing
DIN 18872 Commercial kitchen appliances - Refrigeration equipment components
- Part 1 fridge and freezer counters; Requirements and testing
- Part 2 cooling troughs; Requirements and testing
- Part 3 refrigerated showcases in the dispensing area; Requirements and testing
- Part 4 refrigerators and freezers; Requirements and testing
- Part 5 blast chiller and blast freezer; Requirements and testing
DIN 18873 Methods for determining the energy consumption of large kitchen appliances
- Part 1 combi steamer
- Part 2 Commercial hot beverage maker
- Part 3 deep fryers
- Part 4 convection ovens
- Part 5 tilting frying pans and standing frying pans
- Part 6 tilting pressure cooking pans and standing pressure cooking pans
- Part 7 deck ovens
- Part 8 regeneration systems
- Part 9 cooking zones
- Part 10 ice machines
- Part 11 flow cooler for beverage dispensing systems
- Part 12 roasting ovens
- Part 13 microwave combination devices
- Part 14 Water network-connected drinking water systems for cooling and CO ₂ enrichment
- Part 15 Double-walled boiling kettles and pressure boiling kettles with pressureless cooking space
- Part 16 Commercial kitchen machines
- Part 17 pasta cooker
- Part 18 waffle baking devices
- Part 19 roasting and grilling equipment
- Part 20 Crepe and Poffertjes baking equipment
DIN 18874 large kitchen appliances - trays for insertion - dimensions
DIN 18875 large kitchen appliances - performance optimization connection
DIN 18879 Large kitchen equipment - Equipment for the treatment of drinking water in large kitchens
- Part 1 decarbonization systems in front of large kitchen appliances
DIN 18889 storage coal water heater, pressureless for 1 atm test pressure; Terms, construction, quality, performance, testing
~~DIN 18890 long-burning stoves for solid fuels~~
- ~~Part 10 Low-smoke combustion~~
DIN 18893 Space heating capacity of individual fireplaces; Approximation method for determining the size of the fireplace
DIN 18894 Fireplaces for solid fuels - Pellet stoves - Requirements, testing and labeling
DIN 18896 Fireplaces for solid fuels - Technical rules for installation, requirements for operating instructions
DIN 18897 Fireplaces for solid fuels - Fireplaces independent of ambient air
- Part 1 space heater
DIN 18900 wooden mast construction; Calculation and execution
DIN 18902 stoneware parts for stable construction; Bowls, plates, troughs; Dimensions, requirements, testing
~~DIN 18908 floors for stable systems; Slatted floors made of precast reinforced concrete or of wood; Dimensions, load assumptions, dimensioning, installation~~
DIN 18910 thermal insulation of closed stables - thermal insulation and ventilation
- Part 1 Planning and calculation bases for closed, forced-ventilated stalls
DIN 18915 vegetation technology in landscaping - soil work
DIN 18916 Vegetation technology in landscaping - Plants and planting work
DIN 18917 Vegetation Technology in Landscaping - Lawn and Seeding
DIN 18918 Vegetation technology in landscaping - Engineering biological security construction methods - Securing by sowing, planting, construction methods with living and non-living substances and components, combined construction methods
DIN 18919 Vegetation technology in landscaping - development and maintenance of green areas
DIN 18920 Vegetation Technology in Landscaping - Protection of Trees, Plant Stands and Vegetation Areas during Construction
DIN 18945 earth blocks - terms, requirements, test methods
DIN 18946 earth masonry mortar - terms, requirements, test methods
DIN 18947 clay plaster mortar - terms, requirements, test methods
- Change 1
~~DIN 18951 earth building regulations~~ , withdrawn in 1971 without replacement
DIN 18960 usage costs in building construction

DIN 19000-19999

DIN 19001 plug-in shoe for camera accessories; Connection dimensions
DIN 19002 taking lenses
- Part 1 connection dimensions for pluggable and screwable accessories
DIN 19003 flashlight connector; Flash cable, plug, nipple
- Part 1 connection dimensions, requirements
DIN 19004 phototechnology; Cable release, cable release sleeve, connection dimensions
~~DIN 19010 photoelectric light meter~~
- ~~Part 1 scales, calibration~~
- ~~Part 2 Automatic exposure adjustment in photographic cameras~~
- ~~Part 3 flash exposure meter~~
~~DIN 19011 flash light sources~~
- ~~Part 1 Determination of guide number and performance data~~
- ~~Part 2 electronic flash units with automatic exposure control~~
- ~~Part 3 Key figures for the spectral radiation distribution~~
~~DIN 19012 flash lamps; Flash lamp assemblies with permanently assigned reflectors; Lighting data~~
DIN 19015 time measurement on central locks; Terms, exposure times, measuring arrangements; Synchronous contacts
DIN 19016 time measurement on focal plane shutters; Terms, exposure times, measuring arrangements; Synchronous contacts
~~DIN 19017 exposure value; Terms and reference point, exposure value correction~~
DIN 19021 evaluation of standing projectors with light projection lamps
- ~~Part 2 temperature measurements on slide projectors~~
- Part 3 temperature measurement on work projectors
DIN 19030 filters for recording, copying and reproduction purposes; Copy filter
- Part 3 recording filters, filter names
- Part 4 copy filter; Determine the filter values
- Part 5 copy filter; Filter scales on color copiers
DIN 19045 projection of still and moving images
- Part 1 projection and viewing conditions for all types of projection
- Part 2 Ready-made picture walls
- Part 3 Minimum dimensions for the smallest image elements, line widths, font and image character sizes in original templates for projection
- Part 4 reflection and transmission properties of projection screens; Characteristic sizes, type of screen, measurement
- ~~Part 5 Teaching and home projection for still and moving images, safety requirements for assembled projection walls~~
- ~~Part 6 Teaching and home projection for still and moving images, symbols and information symbols~~
- Part 7 measuring method for determining the imaging properties of slide projectors
- Part 8 light measurements during image projection with a projector and a separate screen
- Part 9 light measurements during image projection with projection units
~~DIN 19046 projection technology, stage and theater projection for standing, moving and moving images~~
- ~~Part 1 General~~
- ~~Part 2 oblique projection on flat screen walls, projection equipment and projection templates~~
- ~~Part 2 Supplement 1 angled projection on flat screen walls, working documents for practical use~~
- ~~Part 2 Supplement 2 DIN setting slide A for aligning the picture stage, nominal size 13 × 13~~
- ~~Part 2 Supplement 3 DIN setting slide A for aligning the picture stage, nominal size 18 × 18~~
- ~~Part 2 Supplement 4 DIN setting slide B for using the projection~~
- ~~Part 3 stage lighting and projection of the stage end~~
DIN 19051 test templates for micrography
- Part 2 test fields for checking legibility and measuring the resolution
  - Supplement 1 test sheet for practical use
  - Supplement 2 Test sheet for practical use with (microfilm) flow cameras
- Part 3 test arrangement (test board) for testing the microfilming with stepping camera of technical drawings
  - Supplement 1 gray fields for practical use
- Part 4 Test sheet B for checking the optical density and for determining the reproduction scale of the picture
  - Supplement 1 test board with gray fields for practical use
  - Supplement 2 test sheet B (A4 format) for practical use
- Part 20 test recordings to determine the conditions for the recording of the film adaptation
- Part 21 test recordings to determine the conditions for recording the film of written material, literature and newspapers
DIN 19052 microfilm technology; Filming of drawings
- Part 1 microfilm 35 mm, dimensions
- Part 2 microfilm 35 mm, recording technology
- Part 3 microfilm 35 mm, reduction and enlargement factors
- Part 4 Recording in parts on microfilm 35 mm
- Part 6 microfilm 35 mm; Minimum requirements for enlargements
DIN 19053 microfilm card for 35 mm film
DIN 19057 microfilm technology; Filming of newspapers; Recording on film 35 mm
DIN 19058 color microfilm - recording technology, production of original line art and halftone originals, evaluation
DIN 19059 microfilms; Pictograms for microfilming
- Part 2 application and overview
  - Supplement 1 Templates for practical use
DIN 19078 microfilm technology; Microfilm readers
- Part 1 Requirements for transmitted light microfilm readers
- Part 4 Minimum information in data sheets
DIN 19204 flow measurement technology; Display areas, sequence of graduation marks and numbering of the scales for flow indicators
DIN 19207 Flow measurement of fluids with throttle devices - threaded connectors and accessories
DIN 19211 Flow measurement of fluids with throttle devices - compensation vessels
~~DIN 19214 flow measurement technology - throttle devices~~
- ~~Part 1 throttle devices with flange pressure tapping, nominal width 50 to 500, nominal pressure 10 to 100 - type of seal smooth~~ (withdrawn)
- ~~Part 2 throttle devices with flange pressure tapping, nominal width 10 to 400, nominal pressure 10 to 100 - sealing type protrusion and recess~~ (withdrawn)
- ~~Part 3 throttle devices with flange pressure tapping, nominal width 10 to 400, nominal pressure 64 to 400 - type of seal lens~~ (withdrawn)
- ~~Part 4 throttle devices with flange pressure tapping; Measuring sections, nominal size 10 to 200~~ (withdrawn)
- ~~Part 5 throttle device with measuring flanges; Length of the extraction nozzle and installation dimensions for determining the space requirement~~ (withdrawn)
DIN 19216 flow measurement technology - assembly arrangements for flow measurement devices according to the differential pressure method
~~DIN 19217 measuring systems for liquids other than water - definitions, requirements and testing (OIML R 117: 1995)~~
~~DIN 19221 regulation technology and control technology - symbols~~
~~DIN 19222 control technology - terms~~ , replaced by DIN IEC 60050-351
~~DIN 19223 control technology - rules for the naming of measuring devices~~ , replaced by DIN EN 62419
~~DIN 19225 naming and classification of controllers~~ (replaced by DIN IEC 60050-351 in 2009)
~~DIN 19226 control engineering and control technology~~ (replaced by DIN IEC 60050-351 in 2009)
DIN 19227 control technology, graphic symbols and code letters for process control technology
- ~~Part 1 Presentation of tasks~~ (withdrawn in 2010, replaced in 2014 by DIN 28000-4 with DIN EN 62424)
- Part 2 Presentation of details
DIN 19235 Measurement, control, regulation; Reporting of operating states
~~DIN 19237 control technology (terms)~~ , replaced by DIN IEC 60050-351
DIN 19242 measurement, control, regulation; Performance test of process computing systems; Timing
- Supplement 1 List of published standards
- Part 1 test procedure
- Part 2 test function: multiplication
- Part 3 test function: conditional jump
- Part 4 test function: sine calculation
- Part 5 test function: matrix inversion
- Part 6 test function: Finding a bit pattern
- Part 7 test function: interrupt handling with program start
- Part 8 test function: I / O operation on peripheral memory (random access)
- Part 9 test function: digital input and output
- Part 10 test function: dialog on the terminal
- Part 11 test function: synchronization with message traffic between two tasks
- Part 12 test function: read and write record-by-record in files (random access)
- Part 13 test function: data transmission with interference-free transmission path
- Part 14 test function: generation of executable code and program start
DIN 19244 telecontrol devices and telecontrol systems
- Part 3 Interfaces (electrical characteristics); IEC 60870-3: 1989; German version HD 546.3 S1: 1991
- Part 4 Requirements for the performance characteristics (IEC 60870-4: 1990); German version HD 546.4 S1: 1992
DIN 19260 pH measurement - general terms
DIN 19261 pH measurement - Measurement methods using potentiometric cells - Terms
DIN 19262 socket and plug shielded for pH electrodes
DIN 19263 pH measurement - pH measuring chains
DIN 19265 pH / redox measurement - pH / redox transmitter - requirements
DIN 19266 pH measurement - reference buffer solutions for the calibration of pH measuring devices
DIN 19267 pH measurement - Technical buffer solutions, preferably for calibration and adjustment of technical pH measuring devices
DIN 19268 pH measurement - pH measurement of aqueous solutions with pH measuring chains with pH glass electrodes and estimation of the measurement uncertainty
DIN 19277 Graphic symbols for process control technology
DIN 19302 Packaging materials - Papers for general packaging purposes - Requirements, testing
DIN 19303 cardboard - terms and classifications
DIN 19306 paper - printing papers
- Part 1: General technical delivery conditions
- Part 2: Technical delivery conditions for offset paper, coated and uncoated, white
- Part 3: Technical delivery conditions for gravure paper, coated and uncoated
- Part 4: Technical delivery conditions for newsprint
DIN 19307 Cardboard and paper - office paper, uncoated, uncoated - requirements, testing
DIN 19400 Dentistry - Orthodontic face bow
DIN 19401 Dentistry - Vocabulary of the process chain from DVT to CAD / CAM for implant prosthetic restorations
DIN 19402 dentistry - powder jet handpieces
DIN 19403 dentistry - multifunctional handpieces
DIN 19516 toilet seats - requirements and test methods
DIN 19522 cast iron drainage pipes and fittings without socket (SML)
DIN 19523 Requirements and test methods for determining the high-pressure jet resistance and flushing resistance of pipeline parts for sewer pipes and sewers
~~DIN 19527 Elution of solids - Shaking method for investigating the elution behavior of organic substances with a water / solids ratio of 2 l / kg~~
DIN 19528 Elution of solids - percolation method for the joint investigation of the elution behavior of inorganic and organic substances
DIN 19529 Elution of solids - Shaking method for investigating the elution behavior of inorganic substances with a water / solids ratio of 2 l / kg
DIN 19531 Pipes and fittings made of plasticizer-free polyvinyl chloride (PVC-U) for sewer pipes inside buildings
- Part 10 Fire behavior, monitoring and laying instructions
DIN 19534 Pipes and fittings made of plasticizer-free polyvinyl chloride (PVC-U) with plug-in socket for sewers and pipes
- Part 3 quality control and construction
~~DIN 19535 Pipes and fittings made of high density polyethylene (PE-HD) for hot water-resistant sewer pipes (HT) inside buildings~~
- ~~Part 10 fire behavior, quality monitoring and installation instructions~~
DIN 19537 Pipes, fittings and manholes made of high density polyethylene (PE-HD) for sewers and pipes
- Part 3 prefabricated shafts; Dimensions, technical delivery conditions
~~DIN 19538 Pipes and fittings made of chlorinated polyvinyl chloride (PVC-C) for hot water-resistant sewer pipes (HT) inside buildings~~ , replaced by DIN EN 1566-1 and DIN CEN / TS 1566-2
- ~~Part 10 fire behavior, quality monitoring and installation instructions~~
DIN 19541 odor traps for special purposes - requirements and test methods
DIN 19551 sewage treatment plants - rectangular basins
- Part 1 settling basin for shield, suction and belt scrapers; Designs, main dimensions, equipment
- Part 3 sand traps with suction and shield scrapers; Designs, main dimensions, equipment
DIN 19552 Sewage treatment plants - round basins - settling basins with shield and suction scrapers and thickener; Designs, main dimensions, equipment
DIN 19553 sewage treatment plants - trickling filter with rotary sprinkler - main dimensions and equipment
~~DIN 19554 sewage treatment plants - screen structure with straight rake as co-current and counter-current screen - main dimensions, equipment~~
DIN 19555 crampons for single-barrel crampons - crampons for installation in concrete
- Correction 1
DIN 19556 sewage treatment plants - channel with shut-off device - main dimensions
DIN 19557 sewage treatment plants - Mineral fillers and fillers made of plastic for trickling filters - Requirements, testing, delivery, introduction
DIN 19558 sewage treatment plants - drainage devices, weir and baffle wall, submerged drainage pipes in basins - basic principles, main dimensions, layout examples
DIN 19559 Flow measurement of wastewater in open channels and gravity lines
- Part 1 General information
- Part 2 venturi channels
~~DIN 19560 Pipes and fittings made of polypropylene (PP) for hot water-resistant sewage pipes (HT) within buildings~~ , replaced by DIN EN 1451-1 and DIN CEN / TS 1451-2
- ~~Part 10 fire behavior, quality monitoring and installation instructions~~
~~DIN 19561 Pipes and fittings made of styrene copolymers for hot water-resistant sewer pipes (HT) inside buildings~~
- ~~Part 10 fire behavior, quality monitoring and installation instructions~~
~~DIN 19565 Pipes, fittings and manholes made of glass fiber reinforced polyester resin (UP-GF) for underground sewers and sewers; Prefabricated manholes~~
- ~~Part 5 Dimensions, technical delivery conditions~~ , replaced by DIN EN 15383 in March 2013
DIN 19569 sewage treatment plants - basic principles for buildings and technical equipment
- Part 2 Special building principles for facilities for the separation and thickening of solids
- Part 3 Special building principles for facilities for aerobic biological wastewater treatment
- Part 4 Special basic principles for shut-off devices without a housing
- Part 5 Special building principles for plants for the anaerobic treatment of wastewater
- Part 7 Faecal sludge transfer station
- Part 8 Special basic principles for systems for wastewater treatment with fixed bed filters and biological filters
- Part 9 Mechanical sewage sludge dewatering
- Part 10 Special building principles for plants for drying sewage sludge
- Part 11 dosing systems
- Part 12 funding facilities
DIN 19571 attachments 500 × 500 for street gullies, class C 250, channel-shaped
- Part 1 compilation
- Part 2 items
DIN 19572 holding devices for entering manholes - requirements, testing
DIN 19573 mortar for new construction and renovation of drainage systems outside of buildings
DIN 19580 drainage channels for traffic areas - durability, unit weight and evaluation of conformity
DIN 19583 attachments 500 × 500 for street gullies, class C 250 and class D 400
- Part 1 compilation
- Part 2 items
DIN 19584 manhole covers for manholes, class D 400
- Part 1 compilation
- Part 2 items
DIN 19585 drainage objects; Technical delivery conditions for objects made of cast material, concrete and concrete in connection with cast material
DIN 19590 attachments for street gullies, class A 15, square
- Part 1 compilation
- Part 2 items
DIN 19593 attachments for road gullies, class B 125, square
- Part 1 compilation
- Part 2 items
DIN 19594 attachments 300 × 500 for street gullies, class C 250
- Part 1 compilation
- Part 2 items
DIN 19596 manhole covers, classes A 15 and B 125, round
- Part 1 compilation
- Part 2 frame
- Part 3 lid
DIN 19605 fixed bed filter for water treatment - structure and components
DIN 19606 chlorine gas dosing systems for water treatment - system structure and operation
DIN 19624 precoat filter for water treatment
DIN 19626 products for the treatment of water for human consumption - calcium chloride
DIN 19627 ozone generation systems for water treatment
DIN 19628 Mechanically acting filters in drinking water installations - Use of mechanically acting filters according to DIN EN 13443-1
~~DIN 19630 guidelines for the construction of water pipelines; Technical rule of the DVGW~~ , March 2000 replaced by DIN EN 805
DIN 19631 Elution of building products - percolation method for investigating the elution behavior of injection media
DIN 19633 Ion exchangers, adsorber resins and hybrid adsorbers for water treatment - Technical delivery conditions
DIN 19635 dosing systems in drinking water installations
- Part 100 requirements for the use of dosing systems according to DIN EN 14812
DIN 19636 water softening systems (cation exchangers) in drinking water installations
- Part 100 requirements for the use of water softening systems according to DIN EN 14743
DIN 19643 Treatment of swimming and bathing pool water
- Part 1 General Requirements
- Part 2 process combinations with fixed bed and precoat filters
- Part 3 process combinations with ozonation
- Part 4 combinations of processes with ultrafiltration
DIN 19645 treatment of rinsing wastewater from plants for the treatment of swimming and bathing pool water (is currently being revised)
DIN 19648 meter for cold water
- Part 1 corner water meter
- Part 2 standpipe water meter
- Part 3 riser water meter
DIN 19650 irrigation - hygienic concerns of irrigation water
~~DIN 19653 irrigation systems - graphic symbols, abbreviations, representations, names~~ , replaced by DIN ISO 15081
DIN 19655 irrigation - tasks, principles, planning and procedures
DIN 19657 Protection of waters, dykes and coastal dunes; Guidelines
DIN 19658 Windable pipes made of polyethylene (PE) and hoses for irrigation systems
- Part 2 hoses with fabric insert, dimensionally stable; Dimensions and technical delivery conditions
- Part 3 tubes with fabric insert, dimensionally unstable; Dimensions and technical delivery conditions
DIN 19660 landscape maintenance in soil culture and hydraulic engineering measures
DIN 19661 hydraulic structures
- Part 1 crossing structures; Passage and estuary structures
- Part 2 sole structures - falls, crash stairs, sole ramps, sole sliding, support sleepers, base sleepers, sole sleepers
DIN 19662 Soil quality - Field tests - Determination of the penetration resistance of soils with the hand penetrometer
DIN 19663 torrent control; Terms, planning and construction
DIN 19666 infiltration pipe and infiltration pipelines - general requirements
DIN 19667 Drainage of landfills - planning, construction and operation
DIN 19671 earth drilling equipment for state cultural building
- Part 1 groove drill, pipe drill
- Part 2 rods, wing drill, drill template, marching spoon, twist drill
DIN 19672 soil extraction devices for state cultural building
- Part 1 Devices for taking soil samples in undisturbed storage
- Part 2 Devices for the examination and taking of peatland samples
DIN 19673 Soil Quality - Graphic representation of soil research results
DIN 19677 Products for the treatment of water for human consumption - Manganese (II) chloride
DIN 19682 soil quality - field studies
- Part 1 Determination of the soil color
- Part 2 Determination of the soil type
- Part 5 Determination of the moisture level of the soil
- Part 7 Determination of the infiltration rate with the double cylinder infiltrometer
- Part 8 Determination of the water permeability with the borehole method
- Part 9 Determination of air permeability
- Part 10 Description and assessment of the soil structure
- Part 12 Determination of the degree of decomposition of peat
- Part 13 Determination of carbonates, sulphides, pH value and iron (II) ions
DIN 19683 soil quality - physical laboratory tests
- Part 9 Determination of the water permeability in water-saturated soil samples
- Part 13 Determination of the proportion of substance, proportion of pores and number of pores
- Part 14 Determination of the substance content of peat soils
- Part 16 Determination of the aggregate stability according to the sieve immersion method
DIN 19684 Soil investigation methods in agricultural hydraulic engineering - Chemical laboratory tests
- ~~Part 3 Determination of the loss on ignition and the residue on ignition~~
- Part 6 Determination of the content of oxalate-soluble iron
- Part 7 Determination of the content of easily soluble bivalent iron
- ~~Part 9 Determination of the content of harmful sulfides and polysulfides in the soil~~
- Part 10 Investigation and assessment of the water during irrigation measures
DIN 19686 Vegetation-ecological data collection for tasks in the field of national culture
DIN 19687 Soil quality - Calculation of the seepage water rate from the soil
DIN 19695 Transport and storage of concrete, reinforced concrete and prestressed concrete pipes, associated fittings and manhole rings
DIN 19698 Investigation of solids - Sampling of solid and solid materials
- Part 1 Instructions for the segment-oriented removal of samples from heaps
- Part 2 Instructions for the taking of samples for the integral characterization of heaps
DIN 19700 dam systems
- Part 10 Common definitions
- Part 11 dams
- Part 12 flood retention basin
- Part 13 barrages
- Part 14 pump storage basin
- Part 15 sedimentation basin
DIN 19702 Solid structures in hydraulic engineering - load-bearing capacity, usability and durability
DIN 19703 Locks on inland waterways - Principles for dimensions and equipment
DIN 19704 hydraulic steel structures
- Part 1 calculation bases
- Part 2 Structural development and production
- Part 3 electrical equipment
DIN 19706 Soil quality - Determination of the risk of soil erosion caused by wind
DIN 19707 Soil Quality - Classification of the nutrient supply status of soils
DIN 19708 Soil quality - Determination of the risk of erosion of soils by water with the help of ABAG
DIN 19711 hydrogeological symbols
DIN 19712 river dikes
DIN 19720 support plates made of concrete for road caps; Dimensions, shapes
DIN 19731 soil quality - utilization of soil material
DIN 19732 Soil quality - Determination of the local relocation potential of non-absorbable substances
DIN 19738 Soil quality - Resorption availability of organic and inorganic pollutants from contaminated soil material
DIN 19739 Air quality and soil quality - Measurement of the atmospheric deposition of organic trace substances; Funnel adsorber process
- Part 1 collection devices; Requirements, structure, application
- Part 2 Determination of polycyclic aromatic hydrocarbons
DIN 19740 Soil quality - Environmentally relevant requirements for the construction and operation of civilian shooting ranges
- Part 2 investigations
DIN 19741 Soil quality - Determination of the content of platinum group elements (platinum, palladium, rhodium) in soils, soil materials and sludge
DIN 19742 Soil quality - Determination of selected phthalates in sludge, sediment, solid waste and soil after extraction and determination by means of mass spectrometric gas chromatography (GC-MS)
DIN 19745 Soil quality - Basics for the determination of the water content by Time-Domain-Reflectometry (TDR) and Time-Domain-Transmissometry (TDT)
DIN 19746 soil quality - Determination of mineral nitrogen (nitrate and ammonium) in soil profiles (Nmin laboratory method)
DIN 19747 Investigation of solids - sample pretreatment, preparation and processing for chemical, biological and physical investigations
DIN 19752 hydropower plants; Rules for planning and operation
DIN 19802 Cast iron fittings for asbestos-cement pressure pipes; Shank ends for GAZ pieces
~~DIN 19850 fiber cement pipes and fittings for sewers~~ , replaced by DIN EN 588-1
- ~~Part 1 Dimensions of pipes, branches and bends~~
- ~~Part 2 dimensions of pipe connections~~
- ~~Part 3 shafts; Dimensions, technical delivery conditions~~
DIN 19901 Separator systems for light liquids and greases - Proof of load-bearing capacity and usability

DIN 20000-29999

DIN 20000 Use of construction products in buildings
- Part 1 wood-based materials
- Part 2 Industrially manufactured formwork beams made of wood
- Part 3 glued laminated timber and glued laminated timber according to DIN EN 14080
- Part 4 Prefabricated load-bearing components with nail plate connections according to DIN EN 14250: 2010-05
- Part 5 Structural timber graded by strength for load-bearing purposes with a rectangular cross-section
- Part 6 Pin-shaped and non-pin-shaped fasteners according to DIN EN 14592 and DIN EN 14545
- Part 7 finger-jointed solid wood for load-bearing purposes according to DIN EN 15497
- Part 129 rules for the use of ceramic intermediate components according to DIN EN 15037-3: 2011-07
- Part 401 Rules for the use of masonry bricks according to DIN EN 771-1: 2011-07
- Part 402 Rules for the use of sand-lime bricks according to DIN EN 771-2: 2015-11
- Part 404 rules for the use of aerated concrete blocks according to DIN EN 771-4: 2011-07
DIN 20002 pipelines for mining; Steel pipes with loose flanges and smooth collars
- Part 1 nominal pressure 10
- Part 2 nominal pressure 6
- Part 3 nominal pressure 40
DIN 20003 pipelines for mining; Fittings with loose flanges and smooth collars
- Part 1 nominal pressure 10
- Part 2 nominal pressure 6
- Part 3 nominal pressure 40
DIN 20004 pipelines for mining
- Part 1 switch-on rings for nominal pressures PN 10 and PN 40
- Part 2 wedge rings for nominal pressures PN 10 and PN 40
DIN 20006 pipelines for mining; Flat sealing rings for steel pipes according to DIN 20002 and fittings according to DIN 20003
DIN 20012 blow transfer pipes
DIN 20013 sealing rings for blow offset pipes
DIN 20018 hoses with textile inserts
- Part 1 Maximum working pressure PN 10/16
- Part 2 Maximum working pressure PN 40
- Part 3 Maximum working pressure PN 100
- Part 4 exam
DIN 20021 fluid technology - hoses with insert - supplements to DIN EN 853 to DIN EN 857
DIN 20029 hose connection parts; Cone gauges; Cone 1: 3
DIN 20030 hose connection parts; Straight-way tap with tap handle; Dimensions, materials, requirements
DIN 20033 hose connection parts; Conical socket with union nut
DIN 20035 hose connection parts; Flange socket; Nominal pressure 16
DIN 20036 hose connection parts; Connection nipple with round thread
DIN 20037 hose connection parts; Connection nipple; Dimensions
DIN 20038 hose connection parts; Connecting sleeves
DIN 20039 hose connection parts - hose clamps
DIN 20040 hose connection parts; Nipple valve; Nominal pressure 16
DIN 20042 water valve, nominal pressure 40 - dimensions and requirements
DIN 20043 plug connections for hydraulic hose lines - dimensions, requirements, testing
DIN 20044 plug connections type S for hydraulic hose lines - dimensions, requirements, testing
DIN 20066 Fluid technology - Hose lines - Dimensions, requirements
DIN 20097 gears for coal planers and chain conveyors underground; Signs for gear ratios
DIN 20109 pickaxe
DIN 20110 tamping pickaxe
DIN 20112 pointed scraper
DIN 20115 pit hatchets
DIN 20119 chute blades
DIN 20120 sand shovels
DIN 20121 grooving shovels
DIN 20123 edge blades
DIN 20124 ladle blades
DIN 20125 filling scoops
DIN 20127 spade
DIN 20128 flat edge blades
DIN 20129 blade shovels
DIN 20135 sabot
DIN 20136 hammer
DIN 20142 hacksaws with round steel bow and two handles
DIN 20151 shovel handle 1300; Dimensions, requirements, testing, labeling
DIN 20152 handles for shovels and spades; Shapes, dimensions, requirements, testing, labeling
DIN 20163 blasting work
DIN 20164 explosives - weather explosives
- Part 1 requirements, testing, labeling
DIN 20165 explosives - firedamp-proof detonators (weather detonators) - requirements and testing
DIN 20166 explosives - firedamp-proof detonating cords (weather detonating cords) - safety requirements and testing
DIN 20180 roller for clothes lifts in laundry rooms
DIN 20182 chain of knots for clothes lifts in laundry rooms - not tested, not according to gauges
DIN 20301 rock drilling technology - terms, units, symbols
DIN 20302 rock drilling equipment; Terms
DIN 20311 drill pipes for large holes in mining over 100 mm in diameter
DIN 20314 thread for drill pipes over 100 mm in diameter for large holes in mining
DIN 20316 rock drilling - Threaded connections for thin-walled rotary drilling rods - Dimensions, execution
DIN 20317 rock drilling - Round thread connections for hammer drill rods - Dimensions, execution
DIN 20350 Cutting mining and jacking machines; Shanks of the cutting tools and their installation dimensions
DIN 20351 rock drilling - Angel hole connection for rotary drill rods - Dimensions, execution
DIN 20352 rock drilling - square connection for rotary drill rods - dimensions, execution
DIN 20353 rock drilling - Trapezoidal thread connections for hammer drill rods - Dimensions, versions
DIN 20361 rock drilling - drill sleeves - connection dimensions, material, design
DIN 20367 rock drilling - Round thread connections for rotary drilling rods - Dimensions, execution
DIN 20369 demolition hammers; Flat and shear chisels with and without spigot end
DIN 20371 rotary hammers; Connection pin for hammer drill support
DIN 20372 rock drilling; Flush pipe; Connection dimensions, material, design
DIN 20374 demolition hammers; Lessons for chisels
DIN 20375 pick hammers; Pointed chisel without shank end
DIN 20376 pick-up hammers; Pointed chisel with spigot end
DIN 20377 rock drilling - flush boring bars - boring bar profiles, spigot ends, cones
DIN 20378 rotary hammers; Taper gauges for boring bar and boring head taper
DIN 20379 rock drilling
- Part 1 percussion drill heads with inner cone for flush drilling
- Part 2 percussion drill heads with internal thread for flush drilling
DIN 20400 round thread for mining; Thread with large carrying depth
DIN 20401 buttress thread - pitch 0.8 mm to 2 mm - dimensions
DIN 20449 switches and track connections for underground mining; Overview, terms
DIN 20450 Simple pit turnouts; Radius 20 m, slope 1: 5; Geometric dimensions
DIN 20452
- Part 1 Simple pit turnouts with hinged tongue; Radius 20 m, slope 1: 5, track width 600 mm; Compilation
- Part 2 Simple pit turnouts with spring rail tongue; Radius 20 m, slope 1: 5, track width 600 mm; Compilation
DIN 20453
- Part 1 tongue devices for simple pit turnouts with hinged tongue; Radius 20 m, inclination 1: 5, track width 600 mm
- Part 2 switch devices for simple pit turnouts with spring rail tongue; Radius 20 m, inclination 1: 5, track width 600 mm
DIN 20454 frogs for simple pit turnouts; Radius 20 m, inclination 1: 5, track width 600 mm
DIN 20455 wheel guide devices for simple pit turnouts; Radius 20 m, inclination 1: 5, track width 600 mm
DIN 20458 Simple pit track connections; Radius 20 m, slope 1: 5; Geometric dimensions
DIN 20460 Simple pit turnouts; Radius 30 m, slope 1: 6; Geometric dimensions
DIN 20462
- Part 1 Simple pit turnouts with hinged tongue; Radius 30 m, inclination 1: 6, track width 600 mm; Compilation
- Part 2 Simple pit turnouts with spring rail tongue; Radius 30 m, inclination 1: 6, track width 600 mm; Compilation
DIN 20463
- Part 1 tongue devices for simple pit turnouts with hinged tongue; Radius 30 m, slope 1: 6, track width 600 mm
- Part 2 switch devices for simple pit turnouts with spring rail tongue; Radius 30 m, slope 1: 6, track width 600 mm
DIN 20464 frogs for simple pit turnouts; Radius 30 m, slope 1: 6, track width 600 mm
DIN 20465 wheel guide devices for simple pit turnouts; Radius 30 m, slope 1: 6, track width 600 mm
DIN 20468 Simple pit track connections; Radius 30 m, slope 1: 6; Geometric dimensions
DIN 20470 Simple pit turnouts; Radius 50 m, slope 1: 7; Geometric dimensions
DIN 20472
- Part 1 Simple pit turnouts with hinged tongue; Radius 50 m, slope 1: 7, track width 600 mm; Compilation
- Part 2 Simple pit turnouts with spring rail tongue; Radius 50 m, slope 1: 7, track width 600 mm; Compilation
DIN 20473
- Part 1 tongue devices for simple pit turnouts with hinged tongue; Radius 50 m, slope 1: 7, track width 600 mm
- Part 2 switch devices for simple pit turnouts with spring rail tongue; Radius 50 m, slope 1: 7, track width 600 mm
DIN 20474 frogs for simple pit turnouts; Radius 50 m, slope 1: 7, track width 600 mm
DIN 20475 wheel guide devices for simple pit turnouts; Radius 50 m, slope 1: 7, track width 600 mm
DIN 20478 Simple pit track connections; Radius 50 m, slope 1: 7; Geometric dimensions
DIN 20499 Track systems in underground mining - General rules
DIN 20500 mine railways; Track gauges and rails; Overview and selection
DIN 20501 mine railways; Rail S 30, flat tab Fl 30
DIN 20506 clamping plates for fastening rails to steel substrates
~~DIN 20536 Simple switch with spring rail tongue; Radius 120 m, slope 1: 9, track gauge 900 mm; Compilation~~
~~DIN 20537 Switch device for simple switches; Radius 120 m, slope 1: 9, track gauge 900 mm~~
~~DIN 20539 wheel guide device for simple switches; Radius 120 m, slope 1: 9, track gauge 900 mm~~
DIN 20548 wheel sets for rail vehicles for underground mining; Rules for measuring
DIN 20549 gauge for mine railways; Terms and tolerances
DIN 20550 small trolley; Composition, main dimensions, execution
DIN 20551 trolley - front wall, jacket, frame, buffer plate
DIN 20552 small transport vehicles; Buffer support web
DIN 20553 tapered roller bearing wheel sets for trolleys - unsprung version
DIN 20555 tapered roller bearing wheel sets for trams, externally sprung design
DIN 20556 tapered roller bearing wheel sets for trolleys, internally sprung design
DIN 20560 medium-sized trolley; Dimensions, execution
DIN 20570 large truck; Dimensions, execution
DIN 20575 Track conveyance - Passenger cars for underground mining
- Part 1 requirements
DIN 20579 buffer springs for trams
- Part 1 calculation
- Part 2 requirements
DIN 20581 trolley; Plate coupling
DIN 20583 trolley shackle coupling
DIN 20586 rail fastenings in mining for rails 30E1 and 33E1 on wooden sleepers
DIN 20590 holding devices on chassis for mining
DIN 20592 monorails for mining
- Part 1 transport container; Dimensions and requirements
- Part 2 anchor devices for transport containers; Dimensions and requirements
DIN 20593 monorails for mining - rails
- Part 1 Straight rails for the I 140 E profile
- Part 2 curved rails and connecting rails for the I 140 E profile
- Part 3 Straight rails and rail connections for the profiles I 140 V and I 250
- Part 4 curved rails and connecting rails for the profiles I 140 V and I 250
DIN 20594 suspension claws for mining for weight forces up to 30 kN; Requirements and tests
DIN 20597 monorails for mining; Washer with teeth
DIN 20599 hanging monorails for mining; Position of the pull rope, roller bracket holder, clearance profile for trolleys
DIN 20600 mine railways - profiles for running wheels of locomotives and wagons
DIN 20601 mine railways; Wheel tires of the running wheels of locomotives
DIN 20609 lighting on mine locomotives; Headlights; Construction features, lighting requirements, measuring devices and measurements
DIN 20610 lighting on mine locomotives; Light for parking light; Construction features, lighting requirements
DIN 20619 monorail suspension systems for mining; Rope drum with suspension bracket; Dimensions and requirements
DIN 20620 positively driven railways in underground mining
- Part 1 overview; Structure and terms
- Part 2 overhead monorails; Structure and terms
- Part 3 floor railways; Structure and terms
DIN 20622 hanging monorails for mining - Permissible trailer loads for rail suspensions and their abutments as well as for the rail profile I 140 E
DIN 20625
- Part 1 Forcibly guided railways for mining; Pin couplings for cable-operated and self-propelled railways; Pin coupling 30
DIN 20629 monorails for mining - hanging of rails
- Part 1 for cable-operated monorails
- Part 2 for self-propelled monorails
- Part 3 calculation bases
DIN 20633 monorails for mining - turnbuckles, with fork ends on both sides
DIN 20635 monorails for the mining industry - shackles for suspensions
DIN 20636 Monorail suspension systems for mining - Suspension claws; Requirements and tests
DIN 20637 monorails for mining - round steel chains for suspensions, tested, long-link
DIN 21057 pipe classes for process engineering systems
- Part 1 General - Basics for creating pipe specs
- Part 5 Technical delivery conditions for pipe components - Reinforced nozzles
- Part 6 Technical delivery conditions for pipe components - flanges for machine prefabrication
DIN 21151 shaft construction - Sheaves for flat hoisting ropes - Safety requirements and testing
DIN 21164 shaft construction - guide carriage - safety requirements and testing
DIN 21181 shaft construction - recovery bucket
- Part 1 recovery bucket with bracket suspension
- Part 2 recovery bucket with suspension on a two-strand ring chain
DIN 21186 shaft construction - rope slings for conveying loads in shafts
DIN 21187 shaft construction - chain slings for conveying loads in shafts
DIN 21194 rope end fastening in radial insert ball bearings for guide ropes - safety requirements and testing
DIN 21198 manhole construction - manhole plumbing
DIN 21258 Lubricants and impregnating agents for traction sheave hoisting ropes in mining - Safety requirements and testing
~~DIN 21315 pit logs; Load capacity of stamps and caps; calculation~~
~~DIN 21316 pit logs; Stamps, caps~~
~~DIN 21317 pit logs; Clubs, tips~~
~~DIN 21318 pit logs; Box wood (pillar wood)~~
~~DIN 21319 pit logs; bolt~~
~~DIN 21320 pit logs; Technical quality and delivery conditions~~
~~DIN 21321 pit lumber; Squared timber~~
~~DIN 21324 pit lumber; Pillar blocks~~
DIN 21325 pit lumber - wooden sleepers
~~DIN 21326 pit lumber; Boards, planks~~
~~DIN 21327 pit lumber; Running boards, planks and squared timbers for stages~~
~~DIN 21328 pit lumber; Rinds~~
~~DIN 21329 pit lumber; Technical quality and delivery conditions~~
DIN 21341 track battens made of wood
DIN 21346 square bolts for guide rails
DIN 21371 intermediate harnesses; Compilations
DIN 21376
- Part 1 guide shoes for conveyors and counterweights with roller guides in mining
- Part 2 guide shoes for conveyors and counterweights with sliding guides in mining
DIN 21377 handrail made of steel for conveyor systems in mining
DIN 21381 intermediate harnesses; Lugs for round rope thimbles
DIN 21382 intermediate harnesses; Outer plates, inner plates
DIN 21383 intermediate harnesses; bolt
DIN 21386 intermediate harnesses; Thimbles for round ropes
DIN 21388 intermediate harnesses; Universal joints
DIN 21389 intermediate harnesses; Thimbles
DIN 21390 thimbles for flat ropes
DIN 21500 shaft lining in mining - design and dimensioning
DIN 21521 rock bolts for mining and tunneling
- Part 1 terms
- Part 2 General requirements for rock bolts made of steel; Tests, test procedures
DIN 21522 anchor plates for pit and tunnel construction
DIN 21530 expansion for mining
- Part 1 General
- Part 2 Dimensions, designation and static values
- Part 3 requirements
- Part 4 exams
- Part 5 Marking of the expansion parts
DIN 21531 rigid arch construction
- Part 1 sheets B 5.4 to B 20.2
- Part 2 curves B 21.7 to B 63
DIN 21546 pit lining; Longwall mining; Labelling
~~DIN 21548 rails for mining~~
DIN 21549 pit lining; Terms for step extension
DIN 21550 pit lining; Steel caps for single stamps; Testing, requirements
DIN 21551 pit lining; Steel caps for single stamps; Lengths
DIN 21555 pit lining; Graphical symbols for the control of step support
DIN 21556 pit lining; Single piston valves; Labelling
DIN 21557 pit lining; Pressure relief valves for step extension; Labelling
DIN 21561 pit lining; Head plate for single stamp; Connection dimensions
DIN 21577 Explosiveness of coal dust in underground hard coal mining - Testing and evaluation of coal dust-air mixtures and hybrid mixtures
DIN 21603 special ventilation in mining - weather flutes made of sheet steel with collars and loose flanges
DIN 21605 special ventilation in mining - weather ducts made of foldable plastic for suction and blowing ventilation - spiral ducts
DIN 21606 special ventilation in mining - weather ducts made of foldable plastic for blowing ventilation - flat ducts
DIN 21610 special ventilation in mining - weather flutes made of foldable plastic - requirements and tests
DIN 21612 special ventilation in mining - jacket material for weather ducts made of foldable plastic - requirements, testing
DIN 21613 special ventilation in mining - connecting pieces made of sheet steel - flange bead
DIN 21614 special ventilation in mining - transition pieces made of sheet steel - flange-flange
DIN 21615 special ventilation in mining - transition pieces made of sheet steel - flange bead
DIN 21625 electric fans for use in firedamp areas of hard coal mines
DIN 21626 combi fans for use in firedamp areas in hard coal mines
DIN 21631 weather structures for mining - wing doors for the driveway - unpressurised single wing weather doors
DIN 21632 Weather structures for mining - Wing doors for the conveyor route - Single-wing weather doors that are not pressure-relieved
DIN 21633 weather structures for mining - wing doors for the conveyor route - non-pressure relieved double-wing weather doors
DIN 21634 Weather structures for mining - Weather swing doors for the conveyor route
DIN 21635 Weather structures for mining - Weather locks - Construction and operation
DIN 21636 Weather structures for mining - Belt conveyor sluices - Dimensions, designations, requirements and testing
DIN 21637 weather structures for mining - wing doors for the conveyor route - pressure-relieved double-wing weather doors
DIN 21638 weather structures for mining - wing doors for the driveway - pressure-relieved double-wing weather doors
DIN 21639 Weather structures for mining - Guideway locks - Pressure-relieved weather doors
~~DIN 21640 Weather structures in mining; Compressed air cylinder for non-pressure relieved weather doors~~
- ~~Part 1 dimensions, requirements, labeling~~
DIN 21772 gears - cylindrical gears and cylinder gear pairs with involute gears - definition of the deviations
DIN 21773 gears - cylindrical gears and cylinder gear pairs with involute gearing - test dimensions for the tooth thickness
DIN 21800 sign "mallet and iron" (mining symbol)
DIN 21802 signs of the mine services and gas protection services
DIN 21901 Mining plan; Structure and overview of the standards; General principles
- Supplement 1 table of contents
- Supplement 2 List of short forms
- Supplement 3 index
- Part 2 Interface for the EDP-supported transfer of characters from the Mining Rift Works
DIN 21902 Mining plan - structure of the mining plan
- Part 2 Completion of crack works
DIN 21903 Mining plan - formats and folds
DIN 21904 Mining plan; Fonts
DIN 21905 Mining plan; Drawing basics
DIN 21906 Mining plan; Divisions
- Supplement 1 overviews; Federal Republic of Germany, federal states, as of January 1, 1990
- Supplement 2 overviews; Federal Republic of Germany, new federal states, as of January 1, 1991
DIN 21907 Mining sketch work - sheet design
DIN 21908 Mining plan; Colours
DIN 21909 Mining plan - measurement points and lines
DIN 21910 special ventilation in mining - weather flutes made of foldable plastic - requirements and tests
DIN 21911 Mining sketch work - objects of the day and contour lines
DIN 21912 Mining Risswerk - Opencast mining
- Part 1 General Requirements
- Part 2 renovation
- Part 3 operational plan
DIN 21913 Mining plan; Civil engineering
- Part 1 mine workings
  - Supplement 1 Explanatory Notes
- Part 2 dismantling, relocation and storage
- Part 3 Completion of pit construction
- Part 4 danger and protection areas
- Part 6 Custody of cavities produced by mining
- Part 7 shaft picture
- Part 11 Geometric sizes in the mine building
DIN 21914 Mining crack work - boreholes and caverns
- Part 1 holes
- Part 2 brine caverns
DIN 21915 Mining Risswerk - Technical facilities
DIN 21916 Mining crack work - operational safety
- Part 1 Weather management and meteorology
- Part 2 fire protection above ground
- Part 3 fire protection underground
DIN 21917 Mining plan - rock and ground movements
- Part 2 Geotechnical measuring points
DIN 21918 Mining crack works - Deposits
- Part 1 terms, classification
- Part 2 thicknesses
DIN 21919 Mining sketch work - stratigraphy
- Part 1 General structure
- Part 2 Regional and local divisions - Hard coal
- Part 3 Regional and local divisions; Brown coal
DIN 21920 Mining Risswerk - Petrography
- Part 1 General signs - sediments
- Part 2 Magmatites
- Part 3 Metamorphic and other rock transformations
- Part 4 minerals
- Part 5 coal mining
- Part 7 Potash and rock salt mining
DIN 21921 Mining plan - tectonics and shape description of rock layers
DIN 21961 Markscheidewesen - Push-on pin, push-on sleeve for hanging theodolite - connection dimensions
DIN 22005 raw material tests in hard coal mining
- Part 1 overview
- Part 2 raw material terms
DIN 22011 raw material investigations in hard coal mining; Processing of exploration holes
DIN 22012 Raw material examinations in hard coal mining; Macropetrographic addressing and recording of coal and secondary rocks
DIN 22013 raw material investigations in hard coal mining; Slot sample; Collection and examination scheme
DIN 22014 raw material investigations in hard coal mining; Raw coal sample from the conveyed material at an operating point; Collection and examination scheme
DIN 22015 raw material investigations in hard coal mining; Macroscopic approach and recording of the rocks of the overburden
DIN 22017 Raw material investigations in hard coal mining - Flotation analysis
DIN 22018 raw material investigations in hard coal mining; Determination of the grain density distribution by swimming and sinking analysis
DIN 22019 raw material testing in hard coal mining
- Part 1 Determination of the particle size distribution; Grain size distribution> 20 µm by sieve analysis
DIN 22020 Raw material examinations in hard coal mining - microscopic examinations of hard coal, coke and briquettes
- Part 1 Terms, overview and application of the procedures
- Part 2 Production of grain and piece cuts
- Part 3 Maceral analyzes on grain cuts
- Part 4 Microlitype analysis on grain grinding
- Part 5 reflection measurements on vitrinites
DIN 22021 raw material investigations in hard coal mining; Subdivision of the secondary rocks based on microscopic examinations to identify technological properties
DIN 22022 Solid fuels - Determination of trace element content
- Part 1 General rules, sampling and sample preparation; Preparation of the analysis sample for the determination (digestion process)
- Part 2 ICP-OES
- Part 3 AAS flame technology
- Part 4 Atomic absorption spectroscopy using the hydride or cold vapor technique
- Part 5 Atomic absorption spectroscopy using the graphite furnace technique
- Part 6 Evaluation and specification of the measurement results
- Part 7 ICP-MS
DIN 22024 Raw material testing in hard coal mining; Determination of the splitting tensile strength of solid rock
DIN 22100 operating materials and supplies made of plastics for use in underground mines
- Part 1 conveyor belts - hygienic requirements, tests, labeling
- Part 3 spiral ducts - safety requirements, tests, marking
- Part 4 flat tubes - safety requirements, tests, marking
- Part 5 pipes, pipe insulation and hoses - safety requirements, tests, labeling
- Part 6 foils, coated / uncoated fabrics, crate materials and warping mats - safety requirements, tests, labeling
- Part 7 Safety requirements, tests, labeling
DIN 22101 belt conveyors for bulk goods Basics calculation and design
DIN 22102 textile conveyor belts for bulk goods
- Part 1 dimensions, requirements, marking
- Part 2 exam
- Part 3 Non-detachable belt connections
DIN 22107 support roller arrangements for belt conveyors
DIN 22109 textile conveyor belts for the hard coal mining industry
- Part 1 conveyor belts with an insert for underground; Dimensions, requirements
- Part 2 rubber conveyor belts with two layers for underground use; Dimensions, requirements
- Part 4 rubber conveyor belts with two layers for surface use; Dimensions, requirements
- Part 5 marking
- Part 6 exams
DIN 22110 test method for conveyor belt connections
- Part 2 endurance test, determination of the running time of belt connections on textile conveyor belts
- Part 3 Determination of the fatigue strength for conveyor belt connections (dynamic test method)
DIN 22111 belt conveyor for underground coal mining - lightweight support structure
DIN 22112 belt conveyor for underground coal mining - idler rollers
- Part 1 dimensions
- Part 2 requirements
- Part 3 exam
DIN 22114 belt conveyor for underground coal mining - heavy supporting structure
DIN 22115 belt conveyor for underground hard coal mining - coatings on idlers - requirements and testing
DIN 22116 belt conveyor for underground coal mining - pressure rollers with a nominal diameter of 159 mm - dimensions, requirements, labeling
DIN 22117 conveyor belts for coal mining; Determination of the oxygen characteristic
~~DIN 22118 Textile conveyor belts for the hard coal mining; Fire test~~ , replaced by DIN EN 12881-1
DIN 22120 scraper strips made of elastomers for belt conveyor systems in hard coal mining
DIN 22121 Textile conveyor belts for the hard coal mining industry - Non-detachable belt connections for conveyor belts with one or two layers; Dimensions, requirements, labeling
DIN 22122 continuous conveyor - troughability of conveyor belts - determination of the proportion of the width with which a conveyor belt rests on the support rollers; Requirements, testing
~~DIN 22123 conveyor belts - belt width-related indentation roll resistance of conveyor belts - requirements, testing~~ , replaced by DIN EN 16974
DIN 22129 steel cord conveyor belts for underground hard coal mining
- Part 1 dimensions, requirements
- Part 2 marking
- Part 3 exams
- Part 4 belt connections; Dimensions, requirements
DIN 22131 steel cord conveyor belts for general conveyor technology
- ~~Part 2 marking~~
- Part 3 exams
DIN 22200 continuous conveyor; Link belt conveyor; Calculation principles
DIN 22252 round steel chains for continuous conveyors and extraction systems in mining
DIN 22253 chain connecting links - U-locks - dimensions, requirements, testing
DIN 22255 flat chains for continuous conveyors in mining
DIN 22256 chain wheels for chain scraper conveyors and extraction systems - dimensions, requirements, testing
DIN 22257 scrapers for chain scraper conveyors; Outer chain belt; Dimensions, requirements, testing
DIN 22258 chain links
- Part 1 flat locks
- Part 2 capsize locks
- Part 3 block locks
DIN 22259 driver for chain scraper conveyor in mining
DIN 22261 excavators, spreaders and additional equipment in lignite opencast mines
- Part 1 construction, commissioning and testing
- Part 2 calculation bases
- Part 3 welded joints, types of joints, evaluation groups, test instructions
- Part 4 Mechanical brakes for hoisting winches
- Part 5 Mechanical brakes and overload protection for slewing gear
- Part 6 Testing of ropes and rope end fastenings
DIN 22270 Continuous Surface Miner (CSM) - Safety
DIN 22400 driver's cabs for hoisting machines; Conveyor hooks and winches in mining
DIN 22405 traction sheave chuck for hoisting machines and conveyor hooks in mining
DIN 22406 traction sheave conveyor reel for shaft and inclined conveyor systems; Brake calculation
DIN 22410 sheaves for round ropes
DIN 22416 Firedamp and explosion-protected electrical equipment for mining; Triangular screw connection; Safety requirements and testing
DIN 22417 Firedamp and explosion-proof electrical equipment; Key shapes for triangular socket wrenches
DIN 22418 Firedamp-proof and explosion-proof electrical equipment for mining; Screw caps; Safety requirements and testing
DIN 22419 Firedamp and explosion-proof electrical equipment for mining - entries for cables and lines
- Part 1 Safety requirements and testing
- Part 2 intermediate pieces for entries; Safety requirements and testing
- Part 3 mounting flanges for entries; Safety requirements and testing
DIN 22424 Firedamp and explosion-proof electrical equipment for mining; Triangular bolts
DIN 22425 Firedamp-proof and explosion-proof electrical equipment for mining; Triangular nut
DIN 22433 Lighting in underground hard coal mining - terms
DIN 22434 lighting in underground hard coal mining - lighting planning principles
- Part 1 General Requirements
- Part 2 longwall operations with shield support
- Part 3 transition areas face / route
- Part 4 belt conveyor
- Part 5 material handling points
- Part 6 Area tunneling
- Part 7 filling locations
- Part 8 construction sites
- Part 9 areas with track operation
- Part 10 workshops and special rooms
DIN 23004 hard coal processing
- Part 1 overview
- Part 2 procedural terms
DIN 23005 coal processing; Description and assessment of raw material properties for processing
DIN 23006 hard coal processing - assessment of processing equipment and processes
- Part 1 General rules, mass balances
- Part 2 classification
- Part 3 sorting
- Part 4 solid-water separation
- Part 5 Crushing and opening up, unwanted crushing
- Part 6 equalization
DIN 23007 Bituminous coal processing - Flocculants for process water - Terms, requirements, testing
~~DIN 23008 hard coal processing; Flotation agent; Terms, requirements, testing~~ , rule-maker recommends the application of DIN 22017
DIN 23009 hard coal processing; Heavy materials; Terms, requirements, testing
DIN 23011 coal processing; Processing plants
- ~~Part 2 flow diagrams~~
- Part 3 Graphic symbols for flow diagrams
- Part 4 Technical agreements as part of the definition of warranties
- Part 5 process control
- Part 6 Establishment and operation of a company laboratory
- Part 7 Machine monitoring
  - Supplement 1 Application aids for the standard
- Part 8 procedural requirements for processing equipment
DIN 23301 safety shoes for underground mining
DIN 23307 buttocks leather for mining ( ass leather )
DIN 23311 knee pads for mining
- Part 1 made of rubber
- Part 2 made of plastic
DIN 23320 flame protective clothing for mining - protective clothing for mine, gas protection and fire services
- Part 1 Safety requirements and tests
- Part 2 one-piece suits (combinations)
- Part 3 Two-piece suits
- Part 4 underwear
- Part 5 hoods
DIN 23323 clogs for mining
DIN 23327 all-round lower leg protectors for mining
DIN 23328 clothing for mining - fabrics for professional suits
DIN 23330 safety marking for mining
DIN 23341 clothing for mining - two-piece work suits (jacket and trousers)
DIN 23342 clothing for mining - men's undershirt with 1/4 sleeves
DIN 23343 clothing for mining - pit shirt
DIN 23344 clothing for mining - men's briefs
DIN 23345 clothing for mining - men's underpants 1/1 long
DIN 23346 clothing for mining - work socks
DIN 23400 rescue stretcher for mining (grinding basket) - Safety requirements and testing
DIN 23405 dressing containers and first aid material for mining
DIN 24041 perforated panels - dimensions
DIN 24063 control parts (engagement elements) for compressed air tools; Designations, safety requirements and testing
~~DIN 24080 earth-moving machines; Hydraulic excavator, rope excavator, terms~~
DIN 24100 construction and building material machines; Mechanical crushing
- Part 1 procedural terms
- Part 2 machine terms, size specifications
DIN 24117 construction and building material machines - placing booms for concrete pumps - calculation principles and stability
DIN 24118 Construction and building material machines - Concrete delivery lines - Dimensions and calculation
DIN 24166 fans; Technical delivery conditions
~~DIN 24189 Testing of air filters for internal combustion engines and compressors; Test procedure~~
~~DIN 24193 duct components for ventilation systems~~
- ~~Part 1 - angle flanges row 1~~
- ~~Part 2 - angle flanges row 2~~
DIN 24201 industrial furnaces; Heating furnaces and heat treatment furnaces; Terms
DIN 24250 centrifugal pumps; Naming and numbering of individual parts
DIN 24251 multistage centrifugal pumps; Drainage pumps, at a nominal speed of 1500 l / min, with a delivery head of up to 1000 m
DIN 24259 pumps; Base plates for machines
- Part 1 dimensions
DIN 24271 central lubrication technology - terms
- Part 1 classification
- Part 2 Graphic symbols for technical drawings
- Part 3 Technical quantities and units
DIN 24273 Pumps and pump units for liquids - Material and construction tests
DIN 24289 oscillating positive displacement pumps and aggregates
- Part 1 technical specifications
- Part 2 Technical specifications, information for a data sheet
DIN 24290 jet pumps; Terms, classification
DIN 24291 jet pumps; Names of individual parts
DIN 24296 Pumps and pump units for liquids - Spare parts - Selection and procurement
DIN 24299 factory plates for pumps
- Part 1 General specifications
DIN 24311 fluid technology; Hydraulic proportional valves; Concepts, signs, units
DIN 24320 Flame-resistant fluids - Pressure fluids of the categories HFAE and HFAS - Properties and requirements
DIN 24336 fluid technology; Hydro cylinder 100 bar, connection dimensions
DIN 24339 fluid technology; Steel hydraulic tanks; Dimensions, requirements, testing; Nominal sizes 63 to 1250
DIN 24340 hydraulic valves
- Part 2 hole patterns and connection plates for the assembly of directional control valves
~~DIN 24343 fluid technology; Hydraulics; Maintenance and inspection list for hydraulic systems~~
DIN 24374 surface technology; Determination of the characteristic curves for pumps
- Part 1 pneumatic piston pump
DIN 24375 surface technology; Flat jet nozzles for airless spray guns; Dimensions, testing, marking
DIN 24420 spare parts lists
- Part 1 General
- Part 2 Form and structure of the text part
DIN 24446 Safety of machines - Vehicle washing systems - Safety requirements, testing
DIN 24450 Machines for processing plastics and rubber; Terms
DIN 24480 die casting machines
- Part 1 types of machines, terms
- Part 2 assemblies, terms
- Part 3 machine parts, terms
- Part 4 characteristics, terms
DIN 24482 Horizontal cold chamber die casting machines; Sizes, main dimensions
DIN 24500 rolling mill equipment; Rolling mills for steel
- Part 1 overview of terms
- Part 2 Terms of the rolling mill furnaces
- Part 3 naming the rolling mills
- Part 4 Designation of the roll stands and roll drives
- Part 5 Terms of cooling and lubrication systems for rolling
- Part 6 Terms of the cooling devices for rolling stock
- Part 7 Terms of the facilities for straightening and stretching
- Part 8 Terms of the devices for stacking
- Part 9 Terms of the devices for destacking
- Part 10 Terms of the devices for winding, collecting, bundling, binding and packaging
- Part 11 Terms of transport and guide devices
- Part 12 Terms of separation devices
- Part 13 Terms of scrap processing facilities
- Part 14 Terms of the descaling devices in hot rolling mills
- Part 15 Terms of other facilities
DIN 24531 grids as steps
- Part 1 gratings made of metallic materials
- Part 2 sheet metal profile gratings made of metallic materials
- Part 3 plastic gratings
DIN 24534 chain locks
DIN 24536 steelworks and rolling mill equipment; Graphic symbols for stone bolts and T-head bolts with anchor plates in engineering drawings
DIN 24537 gratings as floor covering
- Part 1 gratings made of metallic materials
- Part 2 sheet metal profile gratings made of metallic materials
- Part 3 plastic gratings
DIN 24539 steelworks and rolling mill equipment; Anchor plates for anchor bolts according to DIN 261
- Part 1 single anchor plates; Dimensions, designation, installation depths
- Part 2 double anchor plates; Dimensions, designation, installation depths
DIN 24540 extrusion and pipe presses for non-ferrous metals and their pressing tools
- Part 1 General
- Part 2 application "light metal"; Press size, tool, assignment
- Part 3 application "heavy metal"; Press size, tool, assignment
DIN 24541 steelworks and rolling mills; Recess tubes for anchor plates; Dimensions, designation
DIN 24550 fluid technology - hydraulic filters
- Part 1 Terms, nominal pressures, nominal sizes, connection dimensions
- Part 2 filter elements and filter housing; Assessment criteria, requirements
- Part 3 filter elements for line filters; Envelope dimensions
- Part 4 filter elements for add-on return line filters; Envelope dimensions
- Part 5 add-on return filter, connection dimensions
- Part 6 test filter housing; Dimensions
- Part 7 spin-on filter; Assessment criteria, requirements
- Part 8 spin-on filter; Filter and connection dimensions
~~DIN 24554 fluid technology; Hydraulic cylinder 160 bar compact; Connection dimensions~~
~~DIN 24555 fluid technology; Rod ends with narrow spherical bearings; Connection dimensions~~
~~DIN 24556 fluid technology; Fork bearing block with bolt and axle holder; Connection dimensions~~
DIN 24557 fluid technology; Ventilation filter
- Part 2 connection dimensions
DIN 24564 fluid technology - components for hydraulic systems
- Part 1 parameters
- Part 2 parameters for electrical displacement measuring systems for hydraulic cylinders
~~DIN 24567 Fluid technology - Round hydraulic tanks made of steel - Dimensions, requirements, testing - Nominal sizes 1000 to 20000~~
DIN 24602 magazine pallets made of metal; Nominal sizes from 400 mm × 600 mm; Use in automated flexible manufacturing
DIN 24900 symbols for mechanical engineering
- Part 12 sewing machines
- Part 20 plastic and rubber machines
- Part 23 die casting machines
DIN 24901 Graphic symbols for technical drawings for mechanical engineering
- Part 3 shredding machines; Representation in flow diagrams
- Part 4 compressors, fans; Representation in flow diagrams
DIN 24902 Graphic symbols for public information
- ~~Part 11 elevators~~
- Part 20 plastic machines
~~DIN 24950 fluid technology~~
- ~~Part 1 hose lines, terms~~
DIN 24970 service machines - ticket machines - terms
DIN 24971 service machines - ticket machines - housing dimensions, fastening, materials
DIN 24972 service machines - ticket machines - requirements for actuation and display elements
DIN 24973 service machines; Requirements for the modules for processing payment methods
DIN 24974 service machines - ticket machines - requirements for identification features, information, installation criteria
DIN 24975 service machines - ticket machines - general usability requirements
DIN 24976 service machines; Ticket machines; Tickets
DIN 25003 Railway applications - Systematics of rail vehicles - Overview, designations, definitions
DIN 25005 Rail vehicles - Presentation rules - Orientation direction, component identification
DIN 25008 Rail vehicles - Principles for determining the vehicle mass - Terms, symbols, values
DIN 25043 Railway applications - Measurement of rail vehicles in new construction
- Part 1 measurement basics
- Part 2 measurement processes on car bodies of passenger coaches and railcars; with CD-ROM
- Part 3 measurement processes on car bodies of locomotives and power cars; with CD-ROM
- Part 4 Measurement and calculation of the forces acting at the interface between the car body and the running gear; with CD-ROM
- Part 5 measuring processes on the chassis frame; with CD-ROM
- Part 6 measurement processes on the cradle / traverse of the chassis
- Part 7 measurement processes on the complete chassis in the pressure stand; with CD-ROM
- Part 8 measurement processes with the car body placed on the chassis
~~DIN 25108 local rail vehicles; Connection and installation dimensions for electromagnetic rail brakes~~
DIN 25112 local rail vehicles; Wheel tire profiles
- Part 1 width 95 and 110 mm
- Part 2 profile B, width 95 and 115 mm
- Part 3 profile C, width 135 mm
~~DIN 25124 swivel devices on manhole closures , part 1 to part 3~~
DIN 25150 rail vehicles; Inside rooms; Structural requirements for cleaning
DIN 25192 hammer bolts for rail vehicles
DIN 25193 rail vehicles - clamp screws with metric ISO thread - product class C
DIN 25195 rail vehicles - Ribbed screws with metric ISO thread - product class C
DIN 25200 bolts and nuts for rail vehicles - overview
DIN 25201 construction guideline for rail vehicles and their components - screw connections
- Part 1 classification, categories of screw connections
- Part 2 Construction - Mechanical engineering applications
- Part 3 Construction - Electrical Applications
- Part 4 Securing screw connections
- Part 5 corrosion protection
- Part 6 connection dimensions
- Part 7 assembly
  - Correction 1
DIN 25250 rail vehicles - saddle wagons - main dimensions, designs
DIN 25252 rail vehicles; Hopper wagons with side wall flaps; Square for locking shaft
DIN 25255 rail vehicles - square wrench for saddle wagons - dimensions
DIN 25256 rail vehicles - closing aid for saddle wagons - dimensions
DIN 25401 terms of nuclear technology (only on CD-ROM)
- ~~Part 1 Physical and chemical basics~~
- ~~Part 2 reactor design~~
- ~~Part 4 nuclear material monitoring~~
- ~~Part 5 fuel technology~~
- ~~Part 7 Security of nuclear facilities~~
DIN 25403 criticality security in the processing and handling of nuclear fuels
- Supplement 1 Explanations
- Part 1 principles
- Part 2 criticality data for uranium 235-metal-light water mixtures
- Part 3 Criticality data for Plutonium 239-metal-light water mixtures
- Part 4 Criticality data for uranium dioxide-light water mixtures
- Part 5 Criticality data for plutonium 239-dioxide-light water mixtures
- Part 6 criticality data for plutonium 239 nitrate light water mixtures
- ~~Part 7 Criticality data for low-enriched uranium dioxide rod grids in water~~
- Part 8 Criticality data for uranyl nitrate (100% uranium 235) -light water mixtures
DIN 25404 nuclear technology; Formula symbol
~~DIN 25405 aspects for a safe design of thermal reactors with regard to the reactivity behavior~~
DIN 25407 shielding walls
against ionizing radiation
- Supplement 1 Instructions for erecting walls from shielding blocks
- Part 1 building blocks
- Part 2 Special components for shielding walls made of lead
- Part 3 Construction of hot cells made of lead

DIN 25409 remote control devices for working behind protective walls

Supplement 1 Instructions for use
Part 1 remote gripper - dimensions
Part 2 parallel manipulators with 3 joints - dimensions
Part 3 parallel manipulators in telescopic design - dimensions
Part 4 parallel manipulators in telescopic design - requirements and tests
Part 5 parallel manipulators with 3 joints - requirements and tests
Part 6 remote gripper - requirements
Part 7 power manipulators with electric drives - requirements and tests
Part 8 force manipulators - operating parts - arrangement and labeling

DIN 25410 nuclear systems - surface cleanliness of components

DIN 25412 laboratory equipment - glove boxes

Part 1 dimensions and requirements
- Supplement 1 Examples of additional equipment
Part 2 leak tests

DIN 25413 Classification of shielding concrete according to element proportions

Part 1 shielding against neutron radiation
Part 2 shielding from gamma radiation

DIN 25415 decontamination of radioactively contaminated surfaces; Procedure for testing and assessing the decontaminability

DIN 25419 event sequence analysis; Procedure, graphic symbols and evaluation

DIN 25420 Construction of hot cells from concrete

Part 1 Requirements for hot cells for remote-controlled operation
- Supplement 1 working examples
- Supplement 2 shielding calculations
- Supplement 3 working examples for maintenance
Part 2 Requirements for process and storage cells
Part 3 Requirements for radiation protection windows for concrete walls of different densities; Notes on assembly
- Supplement 1 Explanation of the assembly
Part 4 Requirements for radiation protection windows for concrete walls of density 2.3 g / cm³ of different thickness

DIN 25422 Safekeeping and storage of radioactive substances - Requirements for storage facilities and their installation rooms for protection against radiation, fire and theft

DIN 25424 fault tree analysis

Part 1 method and symbols
Part 2 manual calculation method for evaluating a fault tree

DIN 25425 radionuclide laboratories

Part 1 rules for interpretation
- Supplement 1 working examples
Part 3 rules for preventive fire protection
Part 4 rules for personal protection
- Supplement 1 Instructions for creating radiation protection instructions for handling radioactive substances in radionuclide laboratories
- Supplement 2 Instructions for shielding photon and beta radiation
Part 5 rules for the decontamination of surfaces

DIN 25426 Sealed radioactive substances

Part 3 Leak test in connection with manufacture and type test
Part 4 leak test during handling

DIN 25429 test method for shielding hot cells with point-shaped gamma emitters

DIN 25430 safety marking in radiation protection

~~DIN 25432 pipe penetrations through the reactor containment~~

DIN 25433 marking of fuel assemblies for power reactors

DIN 25435 Recurring tests of the components of the primary circuit of light water reactors

Part 1 Mechanized ultrasonic testing
Part 2 magnetic particle and penetrant test
Part 3 pressure test
Part 4 visual inspection
Part 6 Eddy current testing of steam generator heating pipes
Part 7 radiographic testing

DIN 25440 Classification of the rooms in the control area in nuclear systems and facilities according to local dose rates

~~DIN 25448 failure modes and effects analysis ( FMEA )~~ , Nov. 2006 replaced by DIN EN 60812

DIN 25449 components made of reinforced and prestressed concrete in nuclear facilities - safety concept, effects, dimensioning and construction

DIN 25450 ultrasonic testing systems for manual testing

DIN 25453 test method for shielding in nuclear power plants

~~DIN 25455 Treatment of radioactively contaminated gases in nuclear power plants with light water reactors~~ , the regulator recommends the application of KTA 3605

DIN 25456 neutron fluence measurement

Part 1 Determination of the fluence of fast neutrons with activation and gap detectors
Part 2 Determination of the fluence of fast neutrons with iron activation detectors
Part 3 Determination of the fluence of fast neutrons with nickel activation detectors
Part 4 Determination of the fluence of fast neutrons with niobium activation detectors
Part 5 Determination of the fluence of fast neutrons with copper activation detectors
Part 6 Determination of the fluence of fast neutrons with thorium gap detectors

DIN 25457 activity measurement method for the release of radioactive substances and nuclear plant components

Part 1 basics
- Supplement 1 Explanations
Part 4 contaminated and activated metal scrap
Part 6 rubble and buildings
Part 7 floor areas

DIN 25459 containment made of reinforced and prestressed concrete for nuclear power plants

Supplement 1 Explanations

DIN 25460 Preventive fire protection for hot cells

~~DIN 25462 in-situ gamma spectrometry for nuclide-specific environmental contamination measurement~~ , replaced by DIN EN ISO 18589-7

DIN 25463 Calculation of the decay rate of the nuclear fuel from light water reactors

Part 1 Non-recycled nuclear fuel
Part 2 uranium-plutonium mixed oxide (MOX) nuclear fuel for pressurized water reactors

DIN 25466 radionuclide fume cupboards - rules for design and testing

DIN 25471 criticality safety taking into account the fuel element burn-up in the storage and handling of fuel elements in fuel element storage pools of nuclear power plants with light water reactors

DIN 25472 criticality safety in the final disposal of disused nuclear fuels

DIN 25474 Measures of an administrative nature to comply with criticality safety in nuclear facilities, with the exception of nuclear reactors

DIN 25475 nuclear systems - operational monitoring

Part 1 Structure-borne sound monitoring to detect loose parts
Part 2 Vibration monitoring for the early detection of changes in the vibration behavior of the primary circuit of pressurized water reactors
Part 3 Determination of thermal loads during operation

DIN 25476 primary coolant cleaning systems in nuclear power plants with light water reactors

DIN 25478 Use of calculation systems for the verification of criticality safety

Supplement 1 Explanations

DIN 25480 components for contamination protection boxes - nozzles, rings for remote grippers, windows and locks

DIN 25481 requirements for process cells for handling radioactive substances

DIN 25483 Procedure for environmental monitoring with integrating solid-state dosimeters

DIN 25485 Calculation of the decay performance of nuclear fuels from high-temperature reactors with spherical fuel elements

Supplement 1 documentation and explanations

DIN 25488 components for hot cells

Part 1 Requirements for remote control design
Part 2 Requirements for radiation resistance, corrosion resistance and decontaminability

DIN 25489 Determination of uranium and plutonium content and isotopic composition; Mass spectrometric method

DIN 25490 Determination of the uranium content of nuclear pure uranium hexafluoride, uranyl fluoride solutions, uranyl nitrate solutions, uranium oxide powder, uranium dioxide powder and tablets; Gravimetric method

DIN 25491 Determination of the bulk density and the vibration density of nuclear fuel powder

DIN 25492 Determination of the uranium content in nuclear fuel; Potentiometric method based on the modified Davies and Gray method

DIN 25493 Nuclear systems - Protection of metallic component surfaces from damage by assembly aids, seals, packings, packaging material and thermal insulation materials

DIN 25494 Determination of the density and the proportions of open and closed porosity of uranium dioxide tablets; Boiling water process and penetration buoyancy process

DIN 25495 Determination of the density and total porosity of uranium dioxide tablets; Mercury displacement process

DIN 25496 Ventilation components in nuclear systems

~~DIN 25499 Determination of plutonium after oxidation into the hexavalent form; Spectrophotometric method~~

DIN 25525 rail vehicles - wood connections

DIN 25570 semi-finished products for rail vehicles - tubes - overview, selection, application, bending radii

DIN 25700 surface contamination measurements on vehicles and their loads in exceptional situations relevant to radiation protection

DIN 25701 Determination of the solubility of plutonium from unirradiated mixed oxide nuclear fuel in nitric acid

DIN 25703 Determination of uranium and plutonium content in nitric acid solutions; Wavelength-dispersive X-ray fluorescence spectrometric method

~~DIN 25704 Determination of the plutonium content in nitric and sulfuric acid solutions; Potentiometric titration method with potassium dichromate~~

DIN 25705 ceramography of sintered nuclear fuel tablets

DIN 25706 Passive radon measurements

~~Part 1 nuclear track measurement method~~
Part 2 activated carbon measuring method

DIN 25707 Determination of the oxygen / uranium ratio in uranium dioxide nuclear fuel

DIN 25708 Determination of metallic impurities in nuclear fuels by means of optical emission spectrometry with inductively coupled plasma excitation

DIN 25709 Determination of the redensification for UO ₂ - and UO ₂ / Gd ₂ O ₃ - fuel tablets

DIN 25710 Determination of the equivalent hydrogen content in uranium dioxide powders and tablets made from UO ₂ , (U, Gd) O ₂ and (U, Pu) O ₂ using the carrier gas method

DIN 25711 a-spectrometric determination of the ²³² U-isotope fraction in uranium-containing solutions of nuclear fuels

DIN 25712 criticality safety taking into account the fuel burn-up during the transport and storage of irradiated light water reactor fuel elements in containers

~~DIN 26012 tank wagons; Arrangement of the filling and emptying devices for mineral oil tank wagons~~

~~DIN 26016 tank wagons and tank containers; Shut-off devices with flange connection; Installation and connection dimensions, accessories~~

~~DIN 26017 tank wagons and tank containers; Shut-off devices with threaded connection; Installation and connection dimensions, accessories~~

DIN 26029 tank wagons; Vent holes and screw plug

Part 1 pressurized gas tank car with bottom discharge
Part 2 tank wagons with an inclined tank

~~DIN 26030 tank wagons and wagons for powdery goods; Grounding device~~

~~DIN 26032 tank wagons; Marking for dangerous goods; Hazard sign, parking frame~~

DIN 26050 interfaces for tank systems - petrol station device interface

Part 1 General specifications and filling station equipment
Part 2 component gas pump
Part 3 component price transparency
Part 4 component tank level measurement
Part 5 component tank truck electronics
Part 6 component fuel terminal

DIN 26053 Secure measurement technology on tank vehicles for the delivery of heating oil EL, diesel fuel and biodiesel to end users

DIN 26054 corrugated hose lines made of non-metallic materials for chemical substances

DIN 26055 hose lines for use in the pharmaceutical and biotechnical industry with hoses made of non-metallic materials

~~Part 1 tubes made of PTFE and derivatives~~
Part 2 hoses made of silicone rubber
Part 3 hoses made of elastomers with or without liner

DIN 26057 spiral hoses made of thermoplastic polyurethane (TPU) with steel wire reinforcement for granulates and powdery substances - requirements

DIN 26281 Rolling Bearings - Basic dynamic load ratings and nominal life calculation of the modified nominal reference life for rolling bearings (ISO / TS 16281: 2008 + Cor. 1: 2009)

~~DIN 27000 specifications for bar-coded ID cards in connection with slot readers~~

~~DIN 27151 Rail vehicles - National freight wagons - Requirements~~

~~DIN 27167 Electrical and air conditioning systems for rail vehicles; Battery boxes; Main dimensions, execution~~

DIN 27170 electrical and air conditioning equipment for rail vehicles - switch cabinets

Part 1 division dimensions
Part 2 requirements
Part 3 Instructions for installation

DIN 27200 condition of railway vehicles - principles and terms for the operationally safe condition

Supplement 1 overview of the complete works

DIN 27201 condition of railway vehicles - basics and manufacturing technologies

Part 1 Procedure for creating and changing maintenance programs
Part 2 proof of maintenance
Part 3 workshop trip
Part 4 Treatment of railway vehicles after dangerous events
Part 5 Testing of wheel and wheel set contact forces of the railway vehicles
Part 6 welding
Part 7 Non-Destructive Testing
Part 9 fairs
Part 10 thermal spray
Part 11 Procedure for creating a fault tolerance concept
Part 12 Systems that are permanently connected to the railway vehicle and require monitoring

DIN 27202 condition of railway vehicles - vehicle body and special equipment

Part 1 vehicle structure
Part 2 pulling and buffing device
Part 3 steps, handles, handrails, ladders, railings
Part 4 vehicle transitions
Part 5 Movable components of vehicle bodies and doors (except doors of passenger compartments)
Part 6 Load securing and transport protection devices
Part 7 stakes
Part 8 cargo containers / tanks
Part 9 systems that contain substances hazardous to water as well as containers and pipelines for flammable liquids
Part 10 measuring vehicle body
- Correction 1

DIN 27203 condition of railway vehicles - passenger compartment

Part 1 entrance doors - type: revolving doors
Part 2 entrance doors - Type: folding doors
Part 3 entrance doors - Type: Swivel sliding doors
Part 4 entrance doors - type: sliding doors
Part 5 entrance doors - type: swing doors
Part 6 front wall doors / transition doors - types: revolving doors, sliding doors, roller shutter doors, folding doors
Part 7 loading doors - types: pivoting sliding doors, sliding doors, roller shutter doors, folding doors
Part 8 Movable steps
Part 9 emergency entry and exit windows
Part 10 Vehicle-specific entry aids
Part 11 water supply systems
Part 12 kitchen equipment
Part 13 Beverage dispensing systems
Part 14 LPG systems

DIN 27204 condition of railway vehicles - chassis

~~Part 3 axle box and axle box guide~~
Part 4 steel suspension
Part 5 elastomer suspension
Part 6 air suspension
Part 7 Bogie and equipment parts
~~Part 8 tilting technique~~
Part 10 vehicles without bogies

DIN 27205 condition of railway vehicles - brake

Part 1 block brake, mechanical part
Part 2 disc brake, mechanical part
- Correction 1
Part 3 ventilated shaft brake discs
Part 4 non-ventilated shaft brake discs
Part 5 wheel brake discs
Part 6 magnetic rail brake
~~Part 7 Simple unfired pressure vessels for air~~
Part 8 tightness and effectiveness
Part 9 function of the driver's brake valves, controls and displays in the driver's cab
Part 10 Function of the emergency braking device and emergency brake override
Part 11 Function and tightness of the brake for direct braking effect on the operated locomotive and indirect braking effect on the connected vehicles
Part 12 Function and tightness of the motor vehicle brake in railway vehicles

DIN 28000 chemical apparatus engineering - documentation in the life cycle of process plants

Part 1 Collection of the basic and supplementary documentation
- Correction 1
Part 2 Contents of the documentation
~~Part 3 flow diagrams and system identification~~
Part 4 Graphic symbols for fittings, pipelines and actuators
Part 5 Graphic symbols for apparatus and machines

~~DIN 28004 flow diagrams of process engineering systems~~

~~Part 1 Terms, flow chart types, information~~ content, March 2001 replaced by DIN EN ISO 10628-1 and DIN EN ISO 10628-2
~~Part 2 Drawing~~ , March 2001 replaced by DIN EN ISO 10628-1 and DIN EN ISO 10628-2
~~Part 3 Graphic symbols~~ , March 2001 replaced by DIN EN ISO 10628-1 and DIN EN ISO 10628-2
~~Part 4~~ Abbreviations, June 2003 replaced by DIN 6779-13 and DIN EN ISO 10628-1 and DIN EN ISO 10628-2

DIN 28005 tolerances for containers

Part 1 container made of metallic materials
Part 2 container made of steel, enamelled

DIN 28006 tolerances for stirred tanks

Part 1 stirred tank made of metallic materials
Part 2 stirred tank made of steel, enamelled

DIN 28007 tolerances for columns

Part 1 columns made of metallic materials
Part 2 columns made of steel, enamelled

DIN 28008 tolerances and limit dimensions for tube bundle heat exchangers

DIN 28011 Arched bottoms - dished shape

DIN 28013 Arched bottoms - basket arch shape

DIN 28015 columns; Tray and packed columns; Middle part, column part for exchange elements; Construction dimensions

DIN 28016 columns; Designations

DIN 28017 Fixed access to process engineering apparatus

Part 1 stages
Part 2 railings for stages
Part 3 fixed ladders
Part 4 descent protection
Part 5 stairs

DIN 28018 pressure vessel made of steel, enamelled - vessels for systems 0.063 m³ to 10 m³

DIN 28019 pressure vessel made of steel, enamelled - container for storage 12.5 m³ to 125 m³

DIN 28020 Horizontal pressure vessels 0.63 m³ to 25 m³ - dimensions

DIN 28021 Standing pressure vessels - storage tanks, 6.3 m³ to 100 m³ - dimensions

DIN 28022 Vertical pressure vessels - Vessels for process plants 0.063 m³ to 25 m³ - Dimensions

DIN 28025 nozzle made of stainless steel

DIN 28030 flange connections for containers and apparatus

Part 1 apparatus flange connections
Part 2 flanges, limit dimensions

DIN 28031 welding flanges for pressureless vessels and apparatus

~~DIN 28032 welding flanges for pressure vessels and equipment (black)~~ , September 2013 replaced by DIN 28033

DIN 28033 flange connections for apparatus - welding flanges for pressurized apparatus

DIN 28034 flange connections for apparatus - welding neck flanges for apparatus subject to pressure

~~DIN 28036 welding flanges for pressure vessels and apparatus (white)~~ , September 2013 replaced by DIN 28033

~~DIN 28038 welding flanges with cyl. Approach for pressure vessels and apparatus (white)~~ , replaced by DIN 28033 in September 2013

DIN 28040 flange connections for apparatus - flat gaskets

DIN 28050 containers and apparatus - maximum permissible pressure -1.0 bar to +0.5 bar - technical delivery conditions

DIN 28058 lead in apparatus engineering

Part 1 Homogeneous lead
Part 2 constructions from lead semi-finished products

DIN 28070 chemical furnaces with lining; Principles for the construction of the furnaces

DIN 28071 chemical furnaces with lining; Principles for the lining

DIN 28080 saddles for horizontal apparatus

DIN 28081 apparatus feet

Part 1 apparatus feet made of pipe
Part 2 apparatus feet made of profile steel
~~Part 3 from tube, foot shape B; Maximum weight forces for curved floors~~
~~Part 4 made of sectional steel; Maximum moments in the apparatus wall due to weight forces from apparatus feet~~

DIN 28082 standing frames for apparatus

Part 1 With a simple foot ring
Part 2 foot ring with double ring and bars or with anchor bracket

DIN 28083 clamps

Part 1 dimensions, maximum weight forces
~~Part 2 Maximum moments on the apparatus wall due to weight forces via claws form A~~

DIN 28084 support rings and ring carriers on apparatus

Part 1 strength calculation
Part 2 designs, dimensions, thickness determination
Part 3 Dimensions and maximum operating weights for agitated tanks made of unalloyed and stainless steels

DIN 28085 lifting pins on apparatus for assembly; Dimensions and maximum forces

DIN 28086 lifting eyes on apparatus for assembly; Dimensions and maximum forces

DIN 28087 carrying straps on apparatus for assembly; Dimensions and maximum forces

DIN 28088 connection lugs for earthing and equipotential bonding on process engineering equipment

DIN 28090 Static seals for flange connections

Part 2 seals from sealing plates; Special test procedures for quality assurance
Part 3 seals from sealing plates; Test method to determine chemical resistance

DIN 28091 Technical delivery conditions for sealing plates

Part 1 sealing materials; General specifications
Part 2 sealing materials based on fibers (FA); Requirements and testing
Part 3 sealing materials based on PTFE (TF); Requirements and testing
Part 4 sealing materials based on expanded graphite (GR); Requirements and testing

DIN 28105 Chemical apparatus - Apparatus and containers with two curved bottoms - Terms, nominal volume, nominal diameter, main dimensions

DIN 28115 spigot made of unalloyed steel - PN 10 to PN 40

DIN 28117 block flanges for apparatus - connection dimensions PN 10 to PN 40

DIN 28120 round sight glasses with socket in the main force circuit

DIN 28121 round sight glasses with socket in the force shunt

DIN 28122 blind flanges with cladding made of stainless steel for nominal sizes DN 125 to DN 500 and PN levels PN 10 to PN 40

DIN 28124 manhole closures

Part 1 For pressureless containers
Part 2 For pressure vessels, made of steel
Part 3 For pressure vessels, covered
Part 4 swivel devices

DIN 28125 snap locks

Supplement 1 Construction example for opening aid
Part 1 round; Nominal sizes DN 150 to DN 600
Part 2 oval, 350 mm × 450 mm
Part 3 round, with protective ring and surface protection; Nominal size DN 500 and DN 600

DIN 28127 current funnel for half-pipe coils on containers

Supplement 1 calculation example

DIN 28128 half-pipe coils for process engineering apparatus

DIN 28129 U-nuts for closures

DIN 28130 chemical apparatus construction - overview of components of agitator vessels with agitator

DIN 28131 stirrers and baffles for stirred tanks; Forms, names and main dimensions

DIN 28132 agitators; Stirrer shaft diameter

~~DIN 28134 Chemical apparatus; Suspension springs; For clamshell couplings with vertical agitator shafts~~

DIN 28135 thrust washers for disk couplings on vertical agitator shafts

DIN 28136 stirred tank

Part 1 main dimensions
Part 2 arrangement and size of the nozzles for agitator tanks made of unalloyed and stainless steel
Part 3 Arrangement and size of the nozzles for agitated tanks made of steel, enamelled
Part 11 arrangement and size of the cover nozzles for agitated tanks made of steel, enamelled, form CE with 4000 l nominal volume; Not for new designs
Part 14 nozzle arrangement H for agitator tanks made of steel, enamelled, form BE d ₁ = 2400 mm to 3600 mm and nozzle arrangement K for agitator tanks made of steel, enamelled, form CE d ₁ = 2400 mm to 3600 mm; Not for new systems

DIN 28137 agitator flanges

Part 1 For stirred tanks made of steel
Part 2 Form E for stirred tanks made of steel, enamelled

DIN 28138 mechanical seals for agitator shafts

Part 1 Made of unalloyed or stainless steel - operating data, installation dimensions
Part 2 Made of steel, enamelled - operating data, installation dimensions
Part 3 Connections for barrier liquids, cooling, control and assembly and designation system for mechanical seals

DIN 28139 welding necks for enamelled apparatus

Part 1 form H main flanges for clamp screws; Dimensions
Part 2 Form M manhole, handhole connector, assembly opening with clamp screws; Connection dimensions
Part 3 Form S spigot with split loose flange; Connection dimensions

DIN 28140 connections for outlet fittings on containers

~~Part 1 Made of carbon steel, stainless steel and steel, lined; Connection dimensions PN 10~~
Part 2 Made of steel, enamelled; Connection dimensions PN 10

DIN 28141 mounting flanges for containers and apparatus made of unalloyed and stainless steel

~~DIN 28144 stirrer connection for two-part stirrers made of steel, enamelled - dimensions~~

DIN 28145 Welded-on parts for stirred tanks made of steel, enamelled

Part 1 holder for baffle form S for nominal container diameter 2400 to 3600 mm; Connection dimensions; Not for new designs
Part 3 arrangement and size of the lifting eyes
Part 4 support rings
Part 5 insulation collar on the floor outlet
Part 6 sign gantry
Part 8 feet
- Supplement 1 Layout of the appliance feet

DIN 28146 baffle made of steel, enamelled, for stirred tank - installation dimensions

~~DIN 28147 thermometer tubes made of steel, enamelled, for stirred tanks; Installation dimensions~~

DIN 28148 PTFE-coated seals for stirred tanks made of steel, enamelled

DIN 28150 loose flanges, split, for enamelled welding necks; Nominal pressure PN 10

DIN 28151 jacket socket for stirred tank made of steel, enamelled - socket arrangement

DIN 28152 clamp screws for enamelled apparatus

Part 1 dimensions, assignment
- Supplement 1 Determination of the minimum number
Part 2 Technical delivery conditions

DIN 28153 sealing cap for apparatus made of steel, enamelled

Part 1 nominal sizes 350 × 450, 500 and 600
Part 2 nominal sizes 100 to 250

DIN 28154 shaft end for stirrers made of unalloyed and stainless steel, for mechanical seals; Dimensions

DIN 28155 couplings for agitator shafts made of unalloyed and stainless steel; Couplings in the stirred tank; Dimensions

DIN 28156 shaft end for stirrers made of unalloyed and stainless steel, for stuffing boxes; Dimensions

DIN 28157 Impeller stirrer, steel, enamelled, one-piece; Dimensions

DIN 28158 anchor stirrer, enamelled steel, one-piece; Dimensions

DIN 28159 shaft end for one-piece stirrer made of steel, enamelled - dimensions

Supplement 1 Information on strength

DIN 28160 support rings for agitator tanks made of unalloyed and stainless steel - height position

DIN 28161 requirements for agitator drives - speed, direction of rotation, bearing, running accuracy, expansion space for mechanical seal

DIN 28162

Part 1 agitator lanterns for agitator drives with mechanical seal

DIN 28178 twist pipes - dimensions and materials

DIN 28179 U-tubes made of steel for tube bundle heat exchangers - Technical delivery conditions

DIN 28180 Seamless steel tubes for tube bundle heat exchangers - dimensions and materials

DIN 28181 Welded steel tubes for tube bundle heat exchangers - dimensions and materials

DIN 28182 tube bundle heat exchanger - tube divisions, diameter of the bores in tube sheets, deflection segments and support plates

DIN 28183 shell and tube heat exchangers - designations

DIN 28184 tube bundle heat exchanger with two fixed floors

Part 1 inner tube 25, triangular division 32 - number and arrangement of the inner tubes
Part 2 inner tube 25, square division 32 - number and arrangement of the inner tubes
Part 5 working examples

DIN 28185 internals for tube bundle heat exchangers

DIN 28187 tube bundle heat exchanger - tube / tube sheet fastenings

DIN 28189 module heat exchanger

DIN 28190 tube bundle heat exchanger with welded floating head - exemplary embodiments for tube arrangement and floating head

DIN 28191 tube bundle heat exchanger with flanged floating head - examples for tube arrangement and floating head

DIN 28192 Elastic partition wall seals for tube bundle heat exchangers

DIN 28400 vacuum technology; Naming and Definitions

Supplement 1 Alphabetical index
Part 1 General terms
Part 2 vacuum pumps
Part 3 vacuum gauges
Part 5 vacuum drying and freeze drying
Part 6 analysis technology for surface layers
Part 7 vacuum metallurgy
Part 8 vacuum systems, components and accessories

DIN 28401 vacuum technology - symbols - overview

DIN 28402 vacuum technology; Quantities, formula symbols, units, overview

DIN 28403 vacuum technology; Quick connections; Small flange connections

DIN 28404 vacuum technology; Flanges; Dimensions

DIN 28411 vacuum technology; Acceptance rules for mass spectrometer leak detectors, terms

~~DIN 28416 vacuum technology; Calibration of vacuum gauges in the range from 10-3 to 10-7 mbar, general procedure: lowering the pressure through constant flow~~

DIN 28426 vacuum technology; Acceptance rules

Part 1 for rotary displacement vacuum pumps, locking and rotary vane as well as rotary piston vacuum pumps in the rough and fine vacuum range
Part 2 for rotary lobe vacuum pumps, Roots vacuum pumps in the fine vacuum range

DIN 28427 vacuum technology; Acceptance rules for diffusion pumps and steam jet vacuum pumps for propellant vapor pressures <1 mbar

DIN 28428 vacuum technology; Acceptance rules for turbo molecular pumps

DIN 28429 vacuum technology; Acceptance rules for ion getter pumps

DIN 28430 vacuum technology; Measuring rules for steam jet vacuum pumps and steam jet compressors; Propellant: water vapor

Correction 1

DIN 28431 vacuum technology; Acceptance rules for liquid ring vacuum pumps

DIN 28432 vacuum technology; Acceptance rules for diaphragm vacuum pumps

DIN 28459 flanges for tank trucks; Connection dimensions

DIN 28460 flanges for tank trucks; Welding flanges for aluminum pipes

DIN 28461 flanges for tank trucks; Smooth welding flanges for steel pipes

DIN 28462 flanges for tank trucks; Threaded flanges for tank truck couplings

DIN 28463 flanges for tank truck fittings; Flat seals

DIN 28601 pipes and fittings made of ductile cast iron - screw socket connections - assembly, sockets, screw rings, seals, sliding rings

DIN 28602 pipes and fittings made of ductile cast iron - stuffing box socket connections - assembly, sockets, gland ring, seal, T-head bolts and nuts

DIN 28603 pipes and fittings made of ductile cast iron - push-in socket connections - assembly, sockets and seals

DIN 28650 fittings made of ductile cast iron - bends 30 °, EN pieces, MI pieces, IT pieces - application, dimensions

DIN 29502 aerospace; Edging of aircraft glazing made of fabric-reinforced acrylic resins

Part 1 design and manufacturing guidelines

DIN 29505 aerospace; Components made of fiber-reinforced plastics; Information in drawings and parts lists

DIN 29531 aerospace; Castings of aluminum and magnesium alloys; Technical delivery conditions; Not for new designs

DIN 29543 aerospace; Seamless internal pressure pipes made of wrought aluminum alloys; Technical delivery conditions; Not for new designs

DIN 29544 aerospace; Seamless line pipes made of aluminum and wrought aluminum alloys; Technical delivery conditions; Not for new designs

DIN 29546 aerospace; Sheets, plates and strips made of wrought aluminum alloys; Technical delivery conditions; Not for new designs

DIN 29547 aerospace; Seamless structural tubes made of wrought aluminum alloys; Technical delivery conditions; Not for new designs

DIN 29548 L aviation and space travel; Enforcement

Part 1 enforcement with wedge
Part 2 enforcement without a wedge
Part 3 construction information and examples

DIN 29571 aerospace; Electrical equipment

Part 2 Marking of systems, devices and lines
Part 3 energy balance

DIN 29576 aerospace; Electrical wiring systems for aircraft

Part 3 ground connections
Part 4 Testing the behavior in the event of a short circuit
Part 5 Testing of electrical devices and their compatibility with the electrical system

DIN 29583 aerospace; Maintenance and repair of aircraft glazing made of acrylic glass; general guidelines

DIN 29594 aerospace; Aluminum alloy locking rings, metric series

DIN 29595 Welding in the aerospace industry - Fusion-welded metallic components - Requirements

DIN 29597 Aerospace - Processing of liquid coating materials

DIN 29638 Aerospace - Press-in nuts, self-locking

Part 2 construction and installation guidelines; Text in German and English

DIN 29639 aerospace; Press nuts, self-locking, movable

Part 2 construction and installation guidelines

DIN 29640 aerospace; Tempering acrylic glass; Manufacturing guidelines

DIN 29657 aerospace; Seamless structural tubes made of steel and nickel alloys; Technical delivery conditions

DIN 29730 aerospace; Rivet calculation values for static loads for universal rivet connections

Part 1 single shear; Rivet materials 3.1124 and 3.1324
Part 2 two-cut; Rivet materials 3.1124 and 3.1324
Part 3 single-cut; Rivet material 3.3354
Part 4 two-cut; Rivet material 3.3354
Part 5 single-cut; Rivet material 2.4360
Part 6 two-cut; Rivet material 2.4360

DIN 29731 aerospace; Rivet calculation values for static load for countersunk rivet connections

Part 1 single shear; Rivet materials 3.1124 and 3.1324
Part 2 two-cut; Rivet materials 3.1124 and 3.1324
Part 5 single-cut; Rivet material 2.4360
Part 6 single-cut, warmed; Rivet material 2.4360
Part 51 single-cut, warmed; Rivet materials 3.1124 and 3.1324
Part 52 two-cut, waxed; Rivet materials 3.1124 and 3.1324

DIN 29732 aerospace; Rivet calculation values for static loads

Part 1 for fitted rivets made of steel with universal head, single-cut
Part 3 for fitting bolts made of titanium alloys with protruding head, single-cut

DIN 29733 aerospace; Rivet calculation values for static loads

Part 1 for fitted rivets made of steel with countersunk head, single-cut
Part 3 for fitting bolts made of titanium alloys with countersunk head, single-cut

DIN 29734 aerospace; Rivet calculation values for static loads

Part 4 for blind rivets with buttonhead, single-shear
Part 6 for blind rivets according to NAS 1398D with protruding head, single-cut
Part 8 for blind rivets according to MS 20600AD with protruding head, single-shear

DIN 29735 aerospace; Rivet calculation values for static loads

Part 4 for blind rivets with countersunk head, single-shear
Part 6 for blind rivets according to NAS 1399D with countersunk head, single-shear
Part 8 for blind rivets according to MS 20601AD with countersunk head, single-cut

DIN 29736 Aerospace - Earthing plug connection for fuel refueling connection

Part 2 Technical delivery conditions; Not for new designs

DIN 29743 aerospace; Nickel plating of steel; Identification numbers 3302 and 3303

DIN 29764

Part 2 Aerospace; Sewing needles for clamping for manufacturing equipment

DIN 29782 aerospace; Thread inserts made of wire with or without screw locking; Technical delivery conditions

DIN 29783 aerospace; Investment castings of titanium and titanium alloys; Technical delivery conditions

DIN 29831 aerospace; Open nickel-cadmium batteries 24 V 40 Ah

DIN 29850 aerospace; Heat treatment of wrought aluminum alloys

DIN 29867 Aerospace - Single-core cables with copper conductors, 600 V, 260 ° C - Technical delivery conditions; Not for new designs

DIN 29880 aerospace; Semi-finished products and molded parts made of polycarbonate (PC); Technical delivery conditions

DIN 29891 aerospace; Ground units for supplying power to aircraft; Safety devices

DIN 29895 Aerospace - Alternative materials for connecting parts; Not for new designs

Part 2 full rivet; Not for new designs

DIN 29896 Aerospace - Shielded cables with copper conductors with insulated shield, one to four-core, 600 V, 150 and 260 ° C - Technical delivery conditions; Not for new designs

DIN 29900

Part 2 Aerospace; Single-core cables with aluminum conductors, 600 V, 150 ° C, technical delivery conditions

DIN 29921 aerospace; Steel screw rivets with hexagon head and thread lock

DIN 29924 aerospace; Steel screw rivets with countersunk head 100 ° and thread lock

DIN 29963 aerospace; Expansion adhesive films for load-bearing parts, technical delivery conditions

DIN 29965 aerospace; Carbon fiber; Carbon filament yarns; Technical delivery conditions

DIN 29970 Aerospace - Honeycomb cores made of polyamide paper, phenolic resin bonded - Technical delivery conditions

DIN 29971 aerospace; Unidirectional scrim prepreg made of carbon fiber and epoxy resin; Technical delivery conditions

DIN 29972 aerospace; Rigid foams; Panel; Technical delivery conditions

DIN 29978 Aerospace - Honeycomb cores, hexagonally expanded from wrought aluminum alloy, corrosion-protected, imperforate or perforated; Technical delivery conditions

DIN 29995 aerospace; Pickling wheel testing of remelted steels, nickel and cobalt alloys

DIN 30000-39999

DIN 30052 Designation of the wheel set sequence for rail vehicles

DIN 30295 rounded trapezoidal thread

Part 1 nominal dimensions
Part 2 thread limits and dimensions, permissible deviations and permissible wear of the thread gauges

DIN 30386 hexagon nuts - rounded trapezoidal thread

DIN 30387 shoulder nuts - metric fine thread, rounded trapezoidal thread

DIN 30389 hexagon nuts and castle nuts with round thread, for turnbuckles and draw hooks of traction vehicles

DIN 30630 technical drawings - general tolerances in mechanical technology - tolerance rule and overview

DIN 30642 signs - terms

DIN 30643 signs - smudge and abrasion resistance of lettering on signs - requirements and testing

DIN 30645 Technical delivery conditions for signs

Part 1 anodized signs (anodizing process)
Part 2 Etched signs

DIN 30646 self-adhesive signs - Technical delivery conditions for signs made of plastic, aluminum foils and paper

DIN 30650 odorant container for transport and storage; Safety requirements and testing

DIN 30658 Means for the subsequent sealing of underground gas pipes

Part 1 foil hoses and fabric hoses for subsequent sealing of gas pipes; Safety requirements and tests
Part 2 means for the subsequent sealing of connections of underground gas pipes; Safety requirements and tests

DIN 30660 sealant for gas and water supply as well as for water heating systems - non-hardening sealants and polytetrafluoroethylene (PTFE) tapes for metal threaded connections in house installations

DIN 30664 hoses for gas burners for laboratories, without sheathing and armoring

Part 1 Safety requirements and tests

DIN 30665 gas appliances; Gas burners for laboratories (laboratory burners)

Part 1 Safety requirements, testing

DIN 30670 Polyethylene coatings for pipes and fittings made of steel - Requirements and tests

Correction 1

DIN 30672 Organic coatings for the corrosion protection of pipelines laid in soil and water for continuous operating temperatures up to 50 ° C without cathodic corrosion protection - tapes and shrinking materials

DIN 30674 coating of pipes made of ductile cast iron

Part 3 zinc coating with top coat
Part 5 polyethylene film wrapping

DIN 30675 External corrosion protection of underground pipelines

Part 1 Protective measures and areas of application for pipelines made of steel
Part 2 Protective measures and areas of application for ductile iron pipelines

DIN 30677 External corrosion protection of underground fittings

Part 1 coating (external coating) for normal requirements
Part 2 Sheath made of thermosetting plastics (outer coating) for increased requirements

DIN 30678 coating of steel pipes with polypropylene

DIN 30681 expansion joints for gas - Bellows expansion joints with bellows made of stainless steel - Safety requirements, testing, marking

DIN 30682 gas appliances for laundry machines

DIN 30683

Part 1 gas appliances for bakery and confectionery systems, with burners without fans
Part 2 gas devices for bakery and confectionery systems; Ovens with blower burners

DIN 30690 components in gas supply systems

Part 1 requirements for components in gas supply systems
- Correction 1
Part 2 Requirements for metallic materials for control devices for gas appliances
- Notes on material selection, strength values

DIN 30692 membranes for gas distribution and installation

Part 2 Requirements and testing of reinforced elastomer diaphragm material

DIN 30693 hose break protection for hose lines in liquid gas systems

DIN 30694 gas devices for liquid gas in vehicles; Cooking, baking, grilling, refrigerating and freezing equipment

Part 4 requirements and testing

DIN 30695 Portable melting furnaces with liquid gas firing

~~DIN 30697 Liquid gas-fired portable warm air generators with heat exchangers~~

~~Part 3 Safety requirements, testing, marking~~

DIN 30699 propane / butane gas lights; Requirements and testing

DIN 30701 municipal vehicles - general requirements

~~DIN 30702 municipal vehicles~~

~~Part 2 municipal vehicles; Terms for garbage trucks~~ , replaced by DIN 30706-1
~~Part 3 municipal vehicles; Terms for street cleaning~~ vehicles, replaced by DIN EN 13019
~~Part 4 Municipal vehicles - terms for winter service vehicles~~ , replaced by DIN EN 13021
~~Part 5 Terms for suction vehicles and high-pressure flushing vehicles~~

DIN 30704 machines for street cleaning - sweepers, washing vehicles and combinations thereof

~~DIN 30705 suction vehicles and high-pressure flushing vehicles~~

~~Part 1 sewer and gully cleaning vehicles, pit cleaning vehicles~~
~~Part 4 high pressure flushing vehicles~~

DIN 30706 terms of municipal technology

Part 1 waste disposal

DIN 30707 machines for winter service

Part 2 Requirements for winter service vehicles with snow plows
~~Part 3 data sheet for vehicles and devices~~

DIN 30710 safety marking of vehicles and devices

DIN 30714 circular brooms for street cleaning vehicles; Dimensions

~~DIN 30716 roller brooms for machines for street cleaning and for road~~ maintenance services ~~- dimensions~~ , rule setter recommends application of DIN EN 15429-1

DIN 30720 container for skip loader vehicles

Part 1 container with a nominal volume of up to 10 m³
Part 2 containers with a nominal volume of 15 m³ and 20 m³

DIN 30722 roll-off tipper vehicles, roll-off containers

Part 1 roll-off tipper vehicles up to 26 t, roll-off container system 1570 made of steel
Part 2 roll-off tipper vehicles up to 32 t, roll-off container system 1570 made of steel
Part 3 roll-off tipper vehicles up to 12 t, roll-off container system 900 made of steel
~~Part 4 roll-off containers for transport by road and rail~~

DIN 30723 skip loader vehicles, skip loader devices

Part 1 For standard containers with a nominal volume of 5.5 m³ to 20 m³
Part 2 For standard containers with a nominal volume of 2.0 m³ to 5.0 m³

DIN 30728 Graphic symbols for municipal technology

Part 3 street cleaning vehicles, winter service vehicles
~~Part 4 Mine and sewer cleaning vehicles~~
Part 5 attachments with boom

DIN 30730 Mobile container presses - skip loader vehicles and roll-off tipper vehicles; Requirements, connection dimensions

DIN 30734 single-chamber interchangeable silo (free fall) for silo skip and roll-off tipper vehicles - connecting dimensions, requirements

DIN 30735 container with a maximum width of 1520 mm for skip loader vehicles - dimensions, material, design

DIN 30737 waste collection container - Mobile emptying container with hinged lid and a volume of 2.5 m³ and 5 m³ for empties with a lid opening device

DIN 30739 Container for infectious waste with a nominal volume of 30 l to 60 l

DIN 30741 waste container

Part 1 waste container for hazardous waste with a volume of 800 l for solid hazardous waste
Part 2 waste container for hazardous waste with a volume of 1000 l for liquid hazardous waste

DIN 30742 disposal technology - Waste containers for liquid and solid hazardous waste

Part 1 container with a volume of 60 l to 240 l made of metallic materials

DIN 30743 disposal technology - loading aid for storage and transport of waste containers for hazardous waste

DIN 30745 Electronic identification of waste collection bins using transponder technology with frequencies below 135 kHz, text in German and English

DIN 30760 Mobile waste collection container - waste collection container with two wheels and a nominal volume of 60 l to 360 l for diamond emptying

DIN 30781 transport chain

Part 1 basic terms
- Supplement 1 Explanations
Part 2 system of means of transport and transport routes

DIN 30783 module order in the transport chain; Dimensional coordination in the horizontal

Part 1 terms, principles

DIN 30784 transport chain; Transport chain for money and values

Supplement 1 Technical links with other areas
Part 1 dimensional coordinates
Part 2 cassettes; Dimensions and requirements for stackability
Part 3 magazines for cash dispensers, coordination dimensions, requirements for interfaces

DIN 30786 transport loads - data collection of mechanical-dynamic loads

Part 1 General principles and overview of the standard structure
Part 2 collections of values

~~DIN 30791 transport chain; ticket~~

~~Part 2 terms~~

DIN 30795 information in public transport

~~Part 1 Information for ticket sales - General specifications for the arrangement and design of the information and control elements~~
~~Part 2 Information for ticket sales from stationary machines with selection buttons - arrangement and design of the information and operating elements~~
~~Part 3 Information for ticket sales from stationary machines with numeric keypad - arrangement and design of the information and operating elements~~
~~Part 4 Information for ticket sales from mobile machines with selection buttons - arrangement and design of the information and control elements~~
~~Part 5 Information for the sale of tokens for time tickets from stationary machines - arrangement and design of the information and operating elements~~
~~Part 6 Prior information at bus stops about the sale of tickets by the driver - arrangement and design of the information elements~~
Part 7 Information for the sale of tickets from interactive machines; Arrangement and design of the information and operating elements

DIN 30800 transport chain; Handling technology in the transport chain

Part 1 transport chains for bulk goods rail transport; Descriptions and linking criteria
Part 2 Allocation of bulk goods and bulk goods wagons
Part 3 Handling procedures and interfaces in bulk goods rail traffic; Assignment of handling facilities and bulk goods wagons
- Supplement 1 Brief descriptions of handling facilities

DIN 30801 handling technology in the transport chain - loading of bulk goods wagons - interfaces wagons / loading systems

DIN 30802 handling technology in the transport chain - unloading bulk goods wagons

Part 1 interfaces between saddle trolleys and unloading systems
Part 2 Interfaces between hopper side unloading trolleys / unloading systems
Part 3 Interfaces of the hopper center unloading wagon / unloading systems

DIN 30803 handling technology in the transport chain - thawing / freezing protection for saddle trucks

DIN 30823 Bulk Packaging - Rigid IBC - Metal, rigid plastic and combination IBC; Dimensions, design requirements, labeling

DIN 30901 heat treatment of ferrous materials - determination of the depth and formation of the edge oxidation

DIN 30902 Heat treatment of ferrous materials - Light microscopic determination of the thickness and porosity of the connecting layers of nitrided and nitrocarburized workpieces

DIN 30910 sintered metals - material data sheets (WLB)

Part 1 Notes on the WLB
Part 2 sintered metals for filters
Part 3 sintered metals for bearings and molded parts with sliding properties
Part 4 sintered metals for molded parts
Part 6 Sintered forging steels for molded parts

DIN 30911 sintered metals; Sint test standards (SPN)

Part 0 Notes on the SPN
Part 6 Testing the filter properties
Part 7 Testing of the soft magnetic properties

DIN 30912 sintered metals; Sint guidelines (SR)

Part 1 Mechanical processing of sintered parts
Part 2 design of sintered parts
Part 3 heat treatment of sintered parts
Part 4 surface treatment of sintered parts
Part 6 fatigue strength of sintered steels

DIN 30950 melt hardening - general process description

DIN 30960 Melt hardening with additional materials - Melt hardening instruction (SHA) - form

DIN 30965 laser technology - laser beam hardenability test

~~DIN 30999 hard metals - Rockwell hardness test (scales A and 45N) - calibration of hardness comparison plates made of hard metal for testing and calibrating hardness testing~~ machines, rule setter recommends the use of DIN EN ISO 3738-2 and DIN EN ISO 6508-2

DIN 31000 (VDE 1000: 2011-05) General principles for the safety-oriented design of products

~~DIN 31001 Safety-compliant design of technical products; Safety devices; Terms~~

~~Part 1 Safety distances for adults and children~~ , March 2009 replaced by DIN EN ISO 13857

~~DIN 31005 Safety-compliant design of technical products; Interlocks, couplings~~ , replaced by DIN EN ISO 14119

DIN 31051 basics of maintenance

DIN 31216 spring-loaded quarter turn

Part 2 individual parts and friction plates

DIN 31300 symbols for clocks

DIN 31302 clocks; Pendulum rods

DIN 31623 indexing for indexing the content of documents

Part 1 terms, basics
Part 2 Indexing in the same order with descriptors
Part 3 Syntactic indexing with descriptors

~~DIN 31625 Extended character set for African languages~~

~~DIN 31628 Bibliographical character collections; Character stock levels for data entry~~

DIN 31630 register creation

Part 1 Terms, formal design of printed registers

DIN 31631 category catalog for documents

Part 1 Terms and design
Part 2 Systematic part
- Supplement 1 Alphabetical index for the systematic part
Part 3 Indicator for the processing control of categories
Part 4 Codes for entries in data categories
Part 5 Handling of data categories with one entry or multiple entries in data formats
Part 6 Catalog of categories for describing institutions
Part 7 Catalog of categories for the description of projects

DIN 31634 Information and documentation - Transcription of the Greek alphabet

DIN 31635 Information and Documentation - Transcription of the Arabic alphabet for the languages Arabic, Ottoman-Turkish, Persian, Kurdish, Urdu and Pashto

DIN 31636 Information and Documentation - Transcription of the Hebrew Alphabet

DIN 31638 Bibliographical rules of order

DIN 31644 information and documentation - criteria for trustworthy digital long-term archives

DIN 31645 Information and Documentation - Guide to transferring information to digital long-term archives

DIN 31646 Information and Documentation - Requirements for the long-term handling of persistent identifiers (Persistent Identifier)

DIN 31647 Information and documentation - Preservation of evidential value of cryptographically signed documents

DIN 31651 plain bearings

Part 1 formula symbols, systematics
Part 2 formula symbols, application

DIN 31652 plain bearings - hydrodynamic radial plain bearings in stationary operation

Part 1 Calculation of circular cylinder bearings
Part 2 functions for the calculation of circular cylinder bearings
Part 3 Standard operating values for the calculation of circular cylinder bearings

DIN 31653 plain bearings; Hydrodynamic axial plain bearings in stationary operation

Part 1 calculation of axial segment bearings
Part 2 functions for the calculation of axial segment bearings
Part 3 standard operating values for the calculation of axial segment bearings

DIN 31654 plain bearings; Hydrodynamic axial plain bearings in stationary operation

Part 1 calculation of axial tilting pad bearings
Part 2 functions for the calculation of axial tilting pad bearings
Part 3 standard operating values for the calculation of axial tilting pad bearings

DIN 31655 plain bearings; Hydrostatic radial plain bearings in stationary operation

Part 1 Calculation of oil-lubricated plain bearings without intermediate grooves
Part 2 parameters for the calculation of oil-lubricated plain bearings without intermediate grooves

DIN 31656 plain bearings; Hydrostatic radial plain bearings in stationary operation

Part 1 Calculation of oil-lubricated plain bearings with intermediate grooves
Part 2 parameters for the calculation of oil-lubricated plain bearings with intermediate grooves

DIN 31657 plain bearings - hydrodynamic radial plain bearings in stationary operation

Part 1 Calculation of multi-surface and tilting segment bearings
Part 2 functions for the calculation of multi-surface bearings
Part 3 functions for the calculation of tilting pad bearings
Part 4 Standard operating values for the calculation of multi-surface and tilting segment bearings

DIN 31661 plain bearings; Terms, characteristics and causes of changes and damage

DIN 31665 plain bearings; Testing of bearing metals; Corrosion resistance of bearing metals to lubricants under static load

DIN 31670 plain bearings; Quality assurance of plain bearings

Part 8 Testing of form and position deviations and surface roughness on shafts, collars and track discs

DIN 31690 plain bearings; Housing slide bearing; Pillow block

~~DIN 31691 oil level eyes; Requirements, connection dimensions, screw holes~~

DIN 31692 plain bearings

Part 1 lubrication and lubrication monitoring
Part 2 temperature monitoring
Part 3 vibration monitoring
Part 4 Electrical Bearing Isolation
Part 5 Checklist for checking the oil tightness

DIN 31693 plain bearings; Housing slide bearing; Side flange bearings

DIN 31694 plain bearings; Housing slide bearing; Center flange bearing

DIN 31696 axial plain bearings; Segmental thrust bearings, installation dimensions

DIN 31697 axial plain bearings; Ring thrust bearings, installation dimensions

DIN 31698 plain bearings; Fits

~~DIN 31699 plain bearings; Shafts, collars, track discs; Shape and position tolerances and surface roughness~~

~~DIN 32503 protective caps for industrial pressure measuring devices (manometers) with a housing diameter of 63 mm, for welding, cutting and allied processes~~

~~DIN 32506 solderability test for soft soldering~~ , rule setter recommends the application of DIN EN 60068-2-20, DIN EN 60068-2-54, DIN EN 60068-2-58, DIN EN 60068-2-69

~~Part 1 wetting tests~~
~~Part 2 dipping test for samples made of copper alloys; Examination, assessment~~
~~Part 3 dipping test for tinned samples; Examination, assessment~~

DIN 32508 Micro soldering and welding devices with their own hydrogen / oxygen generation - Mechanical and gas-related requirements, testing, labeling

DIN 32509 Hand-operated shut-off valves for welding, cutting and related processes - types, safety requirements, tests

DIN 32510 thermal cutting - flame drilling with oxygen lances in mineral materials - process principles, temperatures, minimum equipment

DIN 32511 welding - electron beam methods for material processing - terms for processes and devices

~~DIN 32513 soft solder pastes~~ , rule ~~setter~~
recommends the use of DIN EN 61190-1-1, DIN EN 61190-1-2, DIN EN 61190-1-3
- ~~Part 1 Composition, technical delivery conditions~~

DIN 32516 Thermal cutting - Thermal cutting ability of metallic components - General principles and terms

DIN 32520 Graphic symbols for welding technology - symbols for arc welding

DIN 32525 welding consumables - testing of welding consumables by means of weld metal samples

Part 4 test piece for the determination of the hardness of surfacing

DIN 32527 Warming during welding, soldering, cutting and allied processes - terms, processes

DIN 32532 welding - Laser beam methods for material processing - Terms for processes and devices

DIN 32533 welding - electron beam process for material processing - beam parameter product - measurement of the beam focus diameter and the divergence angle

DIN 32535 thermal spraying - layer tensile test

DIN 32539 flame blasting steel and concrete surfaces

DIN 32540 laser beam ablation - thermal ablation with the laser beam - terms, influencing variables, implementation

DIN 32561 manufacturing equipment for microsystems - workpiece carriers - connection dimensions and tolerances

DIN 32563 manufacturing equipment for microsystems - classification system for microcomponents

DIN 32564 manufacturing equipment for microsystems - terms

Part 1 General terms in microsystem technology
Part 2 basic technologies and manufacturing
Part 3 handling, storage and transport

DIN 32566 manufacturing equipment for microsystems - specification of a mask support ring for deep x-ray lithography

DIN 32567 Manufacturing equipment for microsystems - Determination of material influences on optical and tactile dimensional measurement technology

Part 1 Qualitative assessment of the material and process-specific influences
Part 2 test body for tactile procedures
Part 3 Derivation of correction values for tactile measuring devices
Part 4 test body for optical methods
Part 5 Derivation of correction values for optical measuring devices

DIN 32605 cuticle scissors, bent up; Dimensions, materials

DIN 32606 nail scissors, bent up; Dimensions, materials

DIN 32607 embroidery scissors; Dimensions, material

DIN 32608 household scissors; Dimensions, materials

DIN 32609 pocket scissors; Dimensions, material

DIN 32611 hair scissors; Dimensions, material

DIN 32612 tailor's scissors; Dimensions, material

DIN 32613 scissors; Designations

DIN 32619 smoking trolley; Terms, quality and safety requirements

DIN 32620 hose clamp; Tensioner and tape

DIN 32622 aquariums made of glass - Safety requirements and testing

DIN 32623 Hospital children's beds made of metal and plastics - Safety requirements and testing

~~DIN 32625 sizes and units in chemistry; Amount of substance and derived quantities~~ , withdrawn in April 2006 without replacement

~~DIN 32629 portion of fabric; Term, marking~~ ; Withdrawn February 2004 without replacement

DIN 32632 chemical analysis - guidelines for the determination of measurement uncertainties in quantitative test results

Part 1 Terms and Strategies

DIN 32633 Chemical analysis - Standard addition procedure - Procedure, evaluation, with CD-ROM

~~DIN 32635 Spectrophotometric analysis of solutions; Terms, symbols, units~~

~~DIN 32640 Chemical elements and simple inorganic compounds~~ ; April 2008 withdrawn without replacement

~~DIN 32641 chemical formulas~~ ; April 2006 withdrawn without replacement

~~DIN 32642 Symbolic description of chemical reactions~~

DIN 32645 chemical analysis - detection, detection and quantification limits under repeatability conditions - terms, procedures, evaluation

DIN 32646 Chemical analysis - Detection and quantification limits as process parameters - Determination in a round robin test under comparison conditions; Terms, meaning, procedure

~~DIN 32649 Graphic symbols for work processes in the laboratory; Basic operations~~

~~DIN 32650 analysis flowcharts; drawn illustration~~

DIN 32676 fittings for food, chemistry and pharmacy - clamp connections for pipes made of stainless steel - execution for butt welding

DIN 32677 beverage dispensing systems - line connection parts for beverage dispensing systems

DIN 32705 classification systems; Creation and further development of classification systems

DIN 32706 Information and documentation - Transcription of the Armenian alphabet

DIN 32707 Information and documentation - Transcription of the Georgian alphabet

DIN 32708 information and documentation - transcription of Japanese

DIN 32711 shaft-hub-connection - polygon profile P3G

Part 1 General and Geometry
Part 2 calculation and dimensioning

DIN 32712 shaft-hub-connection - polygon profiles P4C

Part 1 General and Geometry
Part 2 calculation and dimensioning

~~DIN 32732 Mechanically operated flaps for combustion air; Safety requirements, testing and labeling~~

DIN 32736 building management - terms and services

Supplement 1 Comparison of services

DIN 32742 office and data technology - fax machines

Part 2 basic requirements
Part 3 minimum information

DIN 32744 office and data technology - magnetic strips on passbooks

Part 1 Mechanical and electromagnetic properties and their testing
~~Part 2 location and record~~

~~DIN 32745 office and data technology; Letter opening machines; Minimum information~~

~~DIN 32747 systems for the further processing of postal and data processing documents - inserting machines~~

~~Part 1 Terms and classification~~
~~Part 2 minimum information~~

~~DIN 32749 office and data technology; Letter folding machines; Minimum information~~

DIN 32750 office and data technology; Magnetic tape cassettes for dictation machines with magnetic tape 4

Part 1 cassette for winding drive; Dimensions and properties
~~Part 2 cassette for capstan drive; Dimensions and properties~~

~~DIN 32752 office and data technology - testing of color ribbons~~

~~Part 1 Production of standard prints A and measurement of the reflectometer value~~
~~Part 2 General exams~~
~~Part 3 Production of standard impressions B and determination of color transfer and correction ability~~

~~DIN 32755 office and data technology; Ribbons~~

~~Part 1 spool with 30 mm and 35 mm diameter for ribbons of 13 mm width~~
~~Part 2 spools with 40 mm and 54 mm diameter for ribbons of 13 mm and 14.3 mm width~~
~~Part 3 reel with 82 mm diameter for writing tapes of 13 mm width~~

~~DIN 32756 office and data technology - correction tapes, cores, spools - terms, dimensions, designs~~

~~DIN 32757 office and data technology - destruction of information~~ carriers, replaced by DIN 66399-1 and DIN 66399-2

~~Part 2 machines and equipment - minimum information~~

~~DIN 32758 office and data technology; Calculating machines; Electronic calculator keyboard~~

DIN 32780 protective clothing

Part 100 protection against high frequency electromagnetic fields in the frequency range 80 MHz to 1 GHz; Requirement and testing

DIN 32781 protective clothing - protective suits against pesticides

DIN 32786 bank documents; Magnetic stripe on passbooks, structure and content of the magnetic track

DIN 32835 technical product documentation - documentation for facility management

Part 1 Terms and methodology
Part 2 usage documentation

DIN 32869 technical product documentation - three-dimensional CAD models

Part 1 Requirements for the presentation
Part 3 functional elements

DIN 32876 testing of geometric sizes - electrical length measurement

Part 1 Analog acquisition of the measured variable; Terms, requirements, testing
Part 2 digital acquisition of the measurand; Terms, requirements, testing

DIN 32877 Optoelectronic distance, profile and shape measurement

~~DIN 32878 angle of rotation measuring systems with coded and incremental acquisition of the measured variable; Terms, requirements, testing~~

DIN 32891 round steel chains - quality class 2, not true to gauge, tested

DIN 32895 round steel chains for loading wagons and manure spreaders, true to gauge, tested

DIN 32896 chain links for loader wagons and manure spreaders

DIN 32911 Graphic symbols and signs to inform passengers of cable cars and tow lifts

DIN 32912 Graphic symbols and signs to inform skiers on ski slopes

DIN 32913 trails; Classification, basic graphic symbols and signs to inform cross-country skiers

DIN 32914 signs for mountain railways, slopes and trails; conditions

~~DIN 32932 home sports equipment; Crank exercise equipment; Terms, safety requirements, testing~~ ; August 1997 replaced by DIN EN ISO 20957-5

DIN 32935 home sports equipment; Non-stationary pull and push exercise equipment; Safety requirements, testing

DIN 32937 measuring and test equipment monitoring - planning, administration and use of measuring and test equipment

DIN 32974 Acoustic signals in public areas - requirements

DIN 32975 design of visual information in public space for barrier-free use

Correction 1

DIN 32976 Braille - requirements and dimensions

DIN 32977 Disability-friendly design

Part 1 Terms and general principles

DIN 32980 assignment of the 8-point Braille to the 7-bit code

DIN 32981 additional equipment for the blind and visually impaired on road traffic systems (SVA)

DIN 32982 8-point Braille for information processing - identifiers, names and assignment to the 8-bit code

DIN 32983 Vehicle-bound lifting devices for wheelchair users and other people with reduced mobility - Additional safety requirements and testing

DIN 32984 floor indicators in public traffic areas

Correction 1

DIN 32985 Vehicle-bound ramps for wheelchair users and other mobility-impaired people - Safety requirements and testing

DIN 32986 Tactile writing and lettering - Requirements for the representation and application of Braille and raised profile writing

DIN 33402 human body measurements

Part 1 Terms, measurement methods
Part 2 values
- Correction 1
- Supplement 1 Application of body measurements in practice
~~Part 3 freedom of movement with different basic positions and movements~~
~~Part 4 human body measurements; Basics for the dimensioning of passageways, culverts and accesses~~ , replaced by DIN EN 547

DIN 33403 Climate at the workplace and in the work environment

Part 2 Influence of the climate on the heat balance of humans
Part 3 Assessment of the climate in the warm and heat areas on the basis of selected climate total measures
Part 5 Ergonomic design of cold workplaces

DIN 33404 danger signals for workplaces

Part 3 Acoustic danger signals; Uniform distress signal; Safety requirements, testing

~~DIN 33406 workplace dimensions in the production area - terms, workplace types, workplace dimensions~~

~~DIN 33407 work analysis - characteristics~~

DIN 33408 body outline templates for seats

Part 1 For seating
- Supplement 1 application examples

DIN 33409 Safety-oriented work organization - hand signals to instruct

DIN 33411 human body forces

Part 1 Terms, relationships, determinants
Part 3 Maximum achievable static moments of action of male workers on handwheels
Part 4 Maximum static action forces (isodynes)
Part 5 Maximum static action forces, values

~~DIN 33414 Ergonomic design of control rooms~~ , replaced by DIN EN ISO 11064-2 and DIN EN ISO 11064-3

~~Part 4 structure, layout principles~~

~~DIN 33415 flow work - terms, features~~

~~DIN 33416 Graphic representation of the human figure in typical working postures~~

DIN 33417 Description of place, position and direction of movement of objects

~~DIN 33419 General principles of ergonomic testing of product designs and industrial products~~ , rule-maker recommends the use of DIN EN ISO 15537

DIN 33430 requirements for procedures and their use in job-related aptitude assessments

DIN 33450 Graphic symbol to indicate observation with optical-electronic devices (video information sign)

DIN 33466 signpost for hiking trails

DIN 33821 safety relief valves for gas supply systems with operating pressures up to 100 bar

DIN 33822 gas pressure regulators and safety devices for gas installations for inlet pressures up to 5 bar

DIN 33830 heat pumps; Ready-to-connect heating absorption heat pumps

Part 1 Terms, requirements, testing, labeling
~~Part 3 Refrigeration safety, testing~~
~~Part 4 performance and function test~~

DIN 33831 heat pumps; Ready-to-connect heating and heat pumps with compressors driven by combustion engines

Part 1 Terms, requirements, testing, labeling
Part 2 Requirements for the gas equipment, testing
~~Part 3 Performance and Function Test Conditions~~
~~Part 4 Performance and functional testing of air / water heat pumps~~

~~DIN 33852 office and data technology - correction tapes~~

~~Part 1 Lifting delete; Dimensions, classification, requirements, testing~~
~~Part 2 Masking erasure; Dimensions, requirements, testing~~

~~DIN 33858 office and data technology; Deletion of sensitive data on magnetic data carriers; Extinguishing devices, requirements and tests~~

DIN 33859 Office and data technology - Identification cards - National numbering system, registration and application

~~DIN 33865 Information technology - Plotters - Determination of the throughput of monochrome plotters~~

DIN 33866 Information technology - office and data technology; Color display devices

Part 1 Procedure for the identification of the image reproduction of color devices with digital and analog test templates; Classification and basics
Part 2 Procedure for the identification of the image reproduction of color devices with analog input and analog output of color image reproduction devices: "analog-analog" (copier), design and application
Part 3 Procedure for the identification of the image reproduction with digital input and analog output as hard copy with color image reproduction devices: "digital - analog" (printer); Execution and application
Part 4 Procedure for the identification of the image reproduction of color devices with analog input and digital output in color image reproduction devices: "analog-digital" (scanner), design and application
Part 5 Procedure for the identification of the image reproduction of color devices with digital input and analog output as softcopy for color image reproduction devices: "digital-analog" (monitors), design and application

~~DIN 33868 Information technology - Office and data technology - Office machines; Minimum information in data sheets for class 1 and class 2 printers (ISO / IEC 11160-1: 1996, modified)~~

~~DIN 33869 Information technology - Office and data technology - Office machines; Minimum information in data sheets for class 3 and class 4 printers (ISO / IEC 11160-2: 1996, modified)~~

DIN 33870 office equipment - Requirements and tests for the reprocessing of used toner modules for electrophotographic printers, copiers and fax machines

Part 1 monochrome printing devices (black / white); with CD-ROM
Part 2 4-color printing equipment; with CD-ROM

DIN 33871 Information technology - Office equipment, inkjet print heads and ink tanks for inkjet printers

Part 1 Reconditioning of used inkjet print heads and ink tanks for inkjet printers
Part 2 requirements for and characteristics of compatible ink cartridges (4-color system) for inkjet printers

DIN 33872 Information technology - Office and data technology - Process for the identification of the relative color rendering with YES / NO criteria

Part 1 Classification, terms and basics, only on CD-ROM
Part 2 test files for output properties - test of the distinguishability of the 5- and 16-step color series, only on CD-ROM
Part 3 test files for output properties - test of equality for four equivalent gray definitions and distinguishability of the 16 gray levels, only on CD-ROM
Part 4 test files for output properties - test of equality for two equivalent color definitions with 5- and 16-step color series, only on CD-ROM
Part 5 test files for output properties - testing of elementary hue correspondence and hue distinctness, only on CD-ROM
Part 6 test files for output properties - test of equivalent gradation and regular chromatic gradation, only on CD-ROM

DIN 33880 information technology - programming interface for voice control (VOCAPI)

DIN 33881 measurement with test tube

Part 1 classification
Part 2 terms

DIN 33891 Dust emission from technical work equipment - Determination of the dust emission rate

Part 2 hand-held grinding machines
Part 3 Hand-held sawing machines, hand-held milling machines and planes
Part 4 Hand-held drills and hammers

DIN 33892 Dust emission of technical work equipment - Evaluation of the emission of airborne hazardous substances

Part 2 concentration parameters of the air pollutant, test bench method, hand-held power tools for woodworking

DIN 33893 Dust emission of technical work equipment - Evaluation of the emission of airborne hazardous substances

Part 2 concentration parameters of the air pollutant; stationary operated

DIN 33896 Dust emission from technical work equipment - Basic method for determining the dust emission rate from machines for use on work tables

~~Part 1 basic procedure~~

DIN 33897 workplace atmosphere - routine method for determining the dustiness
of bulk goods
- Part 1 basics
- Part 3 Dust in still air
- Part 4 Repeated fall in cross flow

~~DIN 33898 SWeRF (size-weighted alveolar fraction) and SWeRFcs (size-weighted alveolar fraction of crystalline quartz); German version prEN SWeRF: 2010~~

DIN 33899 Exposure at the workplace - Guidelines for the use of direct display devices for monitoring aerosols

Part 1 Selection of the monitor for special applications (CEN / TR 16013-1: 2010, modified)
Part 2 Evaluation of the concentration of airborne particles with optical particle counters (CEN / TR 16013-2: 2010, modified)
Part 3 Determination of the concentration of airborne particles with photometers

DIN 33902 Information and documentation - Requirements for the binding of library, archive and other written material or other printed products made of paper for use in archives and libraries - Processes and materials

DIN 33903 information and documentation - Tamil legend

DIN 33941 playground equipment - umpire's chairs

Part 1 volleyball
Part 2 badminton; Dimensions, requirements, testing

DIN 33942 Barrier-free playground equipment - Safety requirements and test methods

DIN 33946 bells for bicycles and bicycles with auxiliary engines - requirements and testing

DIN 33956 go-kart systems - Safety requirements and tests

DIN 33957 playground equipment - Beach sports equipment - Requirements and test methods

DIN 33958 bicycles - lighting equipment and dynamos

DIN 33959 gymnastics equipment - vaulting tables - functional and safety requirements, test methods

DIN 33960 summer toboggan runs

Part 1 Safety requirements and test methods
Part 2 Safety requirements for operation

DIN 33961 fitness studio - requirements for studio equipment and operation

Part 1 basic requirements
Part 2 Device-supported cardiovascular training
Part 3 group training
Part 4 Equipment-based strength training

~~DIN 33962 Measurement of Gaseous Emissions - Continuously working measuring devices for individual measurements of nitrogen monoxide and nitrogen dioxide~~ , the regulator recommends the use of DIN EN 14792

DIN 34016 leaf springs; Spring base plates for spring suspension

DIN 34110 piston rings for mechanical engineering; R-rings, rectangular rings with a nominal diameter of 10 to 1200 mm

DIN 34311 bore for centering bolts in hollow-drilled wheelset shafts

DIN 34800 screws with hexalobes with small flange

DIN 34801 screws with hexalobular lobe with large flange

DIN 34802 cylinder screws with large hexalobular socket

DIN 34803 split pin holes and wire holes for screws

DIN 34804 fasteners - degree of change in black surfaces

DIN 34810 hexagonal screws made of plastic

DIN 34811 countersunk head screws made of plastic

DIN 34812 flat head screws with cross recess made of plastic

DIN 34813 cylinder screws with cross recess made of plastic

DIN 34814 hexagon nuts made of plastic

DIN 34815 washers made of plastic - normal series

DIN 34816 washers made of plastic - large series

DIN 34817 welding screws with metric thread

DIN 34818 spring nuts with self-tapping screw thread

DIN 34819 pan head tapping screws with collar and hexalobular socket

DIN 34820 flat washers with chamfers for steel construction

DIN 34821 socket head cap screws with internal serration with thread up to the head

DIN 34822 cylinder screws with flange with internal serration with thread up to the head

DIN 34823 raised countersunk head screws with internal serration

DIN 34824 internal serration for screws

DIN 34827 grub screws with hexalobular socket

DIN 34828 welding ends for turnbuckles

DIN 35224 welding in aircraft and spacecraft construction - acceptance test of powder bed-based laser beam machines for additive manufacturing

DIN 35226 Plastics Welding Supervision - Tasks, responsibilities, knowledge, skills and competence; German version CEN / TR 16862: 2015

DIN 35230 Plastics - Welding of thermoplastics - Information on welding processes; German version CEN / TS 16892: 2015

DIN 37080 adjusting devices for brake pads; Overview and arrangement

DIN 37081 adjusting devices for brake pads; Supports, spring plates

DIN 37082 control devices for brake pads; Compression spring, spring bolt

DIN 38030 Rail vehicles - Compressed air equipment for rail vehicles - Overpressure measuring devices

DIN 38402 German standard methods for the examination of water, waste water and sludge - General information (Group A)

Part 1 Statement of analytical results (A 1)
Part 6 Determination of the minimum frequency of monitoring for water constituents in discharges (emissions strategy) (A 6)
Part 11 sampling of wastewater (A 11)
Part 12 sampling from standing waters (A 12)
Part 13 sampling from aquifers (A 13)
~~Part 15 sampling from rivers (A 15)~~
Part 16 sampling from the sea (A 16)
Part 18 sampling of water from mineral and medicinal springs (A 18)
Part 20 sampling from tidal waters (A 20)
Part 24 Instructions for sampling suspended matter (A 24)
Part 30 pretreatment, homogenization and division of heterogeneous water samples (A 30)
~~Part 41 round robin tests, planning and organization (A 41)~~
Part 42 round robin tests for process validation, evaluation (A 42)
Part 45 round robin tests for external quality control of laboratories (A 45)
Part 51 calibration of analytical methods - linear calibration function (A 51)
Part 60 Analytical quality assurance for chemical and physico-chemical water analysis (A 60)
Part 62 plausibility check of analysis data by ion balancing (A 62)
Part 71 Equivalence of two analysis methods based on the comparison of analysis results and their statistical evaluation; Procedure for quantitative characteristics with a continuous range of values (A 71)

DIN 38404 German standard methods for the examination of water, waste water and sludge - physical and physico-chemical parameters (group C)
- Part 15 Determination of the residual beta activity _{concentration} (C _{A, Rß} ) in drinking, ground, surface and waste water (C 15)

DIN 38405 German standard methods for water, waste water and sludge testing; Anions (group D)

Part 1 Determination of the chloride ions (D 1)
Part 4 Determination of fluoride (D 4)
Part 5 Determination of sulphate ions (D5)
Part 7 Determination of cyanides in slightly contaminated water with ion chromatography or potentiometric titration (D 7)
Part 9 photometric determination of nitrate (D 9)
Part 13 Determination of cyanides (D 13)
Part 17 Determination of borate ions (D 17)
Part 21 photometric determination of dissolved silica (D 21)
Part 23 Determination of selenium using atomic absorption spectrometry (AAS) (D 23)
Part 24 photometric determination of chromium (VI) using 1,5-diphenylcarbazide (D 24)
Part 26 Photometric determination of the dissolved sulphide (D 26)
Part 27 Determination of easily releasable sulphide (D 27)
Part 29 Photometric determination of nitrate with sulfosalicylic acid (D 29); ISO 7890-3: 1988, modified
Part 32 Determination of antimony by means of atomic absorption spectrometry (D 32)
Part 33 Determination of iodide using photometry (D 33)
Part 35 Determination of arsenic - Method using graphite furnace atomic absorption spectrometry (GF-AAS) (D 35)

DIN 38406 German standard methods for water, waste water and sludge analysis; Cations (group E)

Part 1 Determination of iron (E 1)
Part 2 Determination of Manganese (E 2)
Part 3 Determination of calcium and magnesium, complexometric method (E 3)
Part 5 Determination of ammonium nitrogen (E 5)
Part 6 Determination of lead using atomic absorption spectrometry (AAS) (E 6)
Part 7 Determination of copper using atomic absorption spectrometry (AAS) (E 7)
Part 8 Determination of zinc - method by means of atomic absorption spectrometry (AAS) in the air-ethine flame (E 8)
Part 11 Determination of nickel using atomic absorption spectrometry (AAS) (E 11)
Part 13 Determination of potassium using atomic absorption spectrometry (AAS) in an air-acetylene flame (E 13)
Part 14 Determination of sodium by means of atomic absorption spectrometry (AAS) in an air-acetylene flame (E 14)
Part 16 Determination of 7 metals (zinc, cadmium, lead, copper, thallium, nickel, cobalt) by means of voltammetry (E 16)
Part 17 Determination of uranium - Method using adsorptive stripping voltammetry in ground, raw and drinking water (E 17)
Part 18 Determination of the dissolved silver by atomic absorption spectrometry in a graphite furnace (E 18)
~~Part 21 Determination of nine heavy metals (Ag, Bi, Cd, Co, Cu, Ni, Pb, Tl, Zn) after enrichment by extraction (E 21)~~
Part 24 Determination of cobalt using atomic absorption spectrometry (AAS) (E 24)
Part 26 Determination of thallium using atomic absorption spectrometry (AAS) in a graphite furnace (E 26)
Part 32 Determination of iron by means of atomic absorption spectrometry (E 32)
Part 33 Determination of manganese using atomic absorption spectrometry (E 33)

DIN 38407 German standard methods for water, waste water and sludge analysis; Groups of substances that can be recorded together (group F)

~~Part 2 Gas chromatographic determination of semi-volatile halogenated hydrocarbons (F 2)~~
Part 3 gas chromatographic determination of polychlorinated biphenyls (F 3)
~~Part 7 Determination of 6 polycyclic aromatic hydrocarbons (PAH) in drinking and mineral water using high-performance thin-layer chromatography (HPTLC) (F 7)~~
~~Part 8 Determination of 6 polycyclic aromatic hydrocarbons (PAH) in water by means of high-performance liquid chromatography (HPLC) with fluorescence detection (F 8)~~
~~Part 9 Determination of benzene and some derivatives by gas chromatography (F 9)~~
~~Part 11 Determination of selected organic plant treatment agents using Automated Multiple Development (AMD) technology (F 11)~~
~~Part 14 Determination of phenoxyalkanecarboxylic acids using gas chromatography and mass spectrometric detection after solid-liquid extraction and derivatisation (F 14)~~
Part 16 Determination of aniline derivatives using gas chromatography (F 16)
Part 17 Determination of selected nitroaromatic compounds by gas chromatography (F 17)
Part 22 Determination of glyphosate and aminomethylphosphonic acid (AMPA) in water by high-performance liquid chromatography (HPLC), post-column derivatization and fluorescence detection (F 22)
Part 27 Determination of selected phenols in groundwater and soil seepage water, aqueous eluates and percolates (F 27)
Part 30 Determination of trihalomethanes (THM) in swimming and bathing pool water with headspace gas chromatography (F 30)
~~Part 34 Determination of selected plant treatment agents, biocides and degradation products; Method using gas chromatography (GC-MS) after solid phase microextraction (SPME) (F 34)~~
Determination part 35 selected phenoxyalkyl and further acid crop protection agents - Method using high-performance liquid chromatography and mass spectrometric detection (HPLC-MS / MS) (F 35)
Part 36 Determination of selected active ingredients in pesticides and other organic substances in water - Method using high-performance liquid chromatography and mass spectrometric detection (HPLC-MS / MS or HRMS) after direct injection (F 36)
Part 37 Determination of organochlorine pesticides, polychlorobiphenyls and chlorobenzenes in water - Method using gas chromatography and mass spectrometric detection (GC-MS) after liquid-liquid extraction (F 37)
Part 39 Determination of selected polycyclic aromatic hydrocarbons (PAH) - Method by means of gas chromatography and mass spectrometric detection (GC-MS) (F 39)
Part 41 Determination of selected highly volatile organic compounds in water - Method using gas chromatography and mass spectrometry (GC-MS) after headspace solid phase microextraction (HS-SPME) (F 41)
Part 42 Determination of selected polyfluorinated compounds (PFC) in water - Method using high-performance liquid chromatography and mass spectrometric detection (HPLC-MS / MS) after solid-liquid extraction (F 42)
Part 43 Determination of selected volatile organic compounds in water - Method by means of gas chromatography and mass spectrometry according to the static headspace technique (HS-GC-MS) (F 43)

DIN 38408 German standard methods for the examination of water, waste water and sludge - Gaseous components (Group G)

Part 3 Determination of ozone (G 3)
Part 5 Determination of chlorine dioxide (G 5)

DIN 38409 German standard methods for water, waste water and sludge testing; Summary effect and substance parameters (group H)
- ~~Part 26 Determination of the bismuth complexation _index I~~ ~~_BiK (H 26)~~

DIN 38410 German standard methods for water, waste water and sludge examination - biological-ecological water examination (group M)

Part 1 Determination of the saprobic index in rivers (M 1)

DIN 38411 German standard methods for water, waste water and sludge analysis; Microbiological processes (group K)

Part 6 Detection of Escherichia coli and coliforms (K 6)

DIN 38412 German standard methods for the examination of water, waste water and sludge - test method with aquatic organisms (group L)

Part 3 toxicity test to determine the inhibition of dehydrogenase activity in activated sludge (TTC test) (L 3)
~~Part 11 Determination of the effect of water constituents on small crustaceans (daphnia short-term test) (L 11)~~
Part 13 Determination of oxygen production and oxygen consumption in water with the light and dark bottle method SPG and SVG (L 13) (biogenic ventilation rate)
Part 14 Determination of the oxygen production with the light-dark bottle method under laboratory conditions SPL (L 14) (oxygen production potential)
Part 16 Determination of the chlorophyll-a content of surface water (L 16)
Part 26 degradation and elimination test for surfactants to simulate municipal sewage treatment plants (L 26)
~~Part 27 Determination of the inhibiting effect of wastewater on the oxygen consumption of Pseudomonas putida (Pseudomonas oxygen consumption inhibition test) (L 27)~~
Part 30 Determination of the non-acutely toxic effect of wastewater against daphnia via dilution levels (L 30)
Part 33 Determination of the non-toxic effect of wastewater on green algae (Scenedesmus chlorophyll fluorescence test) via dilution levels (L 33)
Part 37 Determination of the inhibitory effect of water on the growth of bacteria (Photobacterium phosphoreum; cell reproduction inhibition test) (L 37)

DIN 38413 German standard methods for water, waste water and sludge testing; Individual components (group P)

Part 1 Determination of hydrazine (P 1)
~~Part 2 Determination of vinyl chloride (chloroethene) by means of gas chromatographic headspace analysis (P 2)~~
~~Part 4 Determination of carbon disulfide (P 4)~~
Part 6 Determination of acrylamide - method by means of high performance liquid chromatography and mass spectrometric detection (HPLC-MS / MS) (P 6)
Part 8 Determination of the dissolved complexing agents nitrilotriacetic acid (NTA), ethylenedinitrilotetraacetic acid (EDTA) and diethylenetrinitrilopentaacetic acid (DTPA) using liquid chromatography (LC) (P 8)

DIN 38414 German standard methods for water, waste water and sludge analysis; Mud and sediments (group S)

~~Part 4 Determination of the elutability with water (S 4)~~
Part 6 Determination of the oxygen consumption rate (S 6)
Part 8 Determination of the putrefaction behavior (S 8)
Part 9 Determination of the chemical oxygen demand (COD) (S 9)
Part 11 sampling of sediments (S 11)
Part 12 Determination of phosphorus in sludge and sediments (S 12)
Part 13 Detection of Salmonella in disinfected sewage sludge (S 13)
Part 14 Determination of selected polyfluorinated compounds (PFC) in sludge, compost and soil - Method using high-performance liquid chromatography and mass spectrometric detection (HPLC-MS / MS) (S 14)
Part 15 Determination of the specific residual beta activity a _Rß in sludge, sediment and suspended matter (S 15)
Part 17 Determination of purgable and extractable, organically bound halogens (S 17)
Part 18 Determination of adsorbed, organically bound halogens (AOX) (S 18)
Part 19 Determination of the organic acids volatile in steam (S 19)
Part 20 determination of 6 polychlorinated biphenyls (PCB) (S 20)
Part 21 Determination of 6 polycyclic aromatic hydrocarbons (PAH) by means of high-performance liquid chromatography (HPLC) and fluorescence detection (S 21)
Part 22 Determination of the freeze-dry residue and production of the freeze-dry mass of a sludge (S 22)
Part 23 Determination of 15 polycyclic aromatic hydrocarbons (PAH) by high-performance liquid chromatography (HPLC) and fluorescence detection (S 23)
Part 24 Determination of polychlorinated dibenzodioxins (PCDD) and polychlorinated dibenzofurans (PCDF) (S 24)
~~Part 35 Determination of arsenic - Method using graphite furnace atomic absorption spectrometry (GF-AAS) (D 35)~~

DIN 38415 German standard methods for the examination of water, waste water and sludge - Suborganismic test methods (group T)

Part 1 Determination of cholinesterase-inhibiting organophosphate and carbamate pesticides (cholinesterase inhibition test) (T 1)
Part 3 Determination of the mutagenic potential of water with the umu test (T 3)
Part 4 Determination of the mutagenic potential with the Salmonella microsome test (Ames test) (T 4)

DIN 40000-49999

DIN 40015 frequency ranges and wavelength ranges

DIN 40020 terms of wave propagation

DIN 40030 rated voltages for direct current motors fed by controllable converters with direct mains connection

DIN 40041 reliability; Terms

DIN 40081 guidelines for reliability

Part 11 components of electronics, batchwise and periodic tests

~~DIN 40101 symbols~~

~~DIN 40103 Electrical properties of straight conductors~~

DIN 40108 Electrical power engineering - Power systems - Terms, sizes, symbols

DIN 40110 alternating current quantities

Part 1 two-wire circuits
Part 2 multi-conductor circuits

DIN 40146 message transmission

Part 1 basic terms

DIN 40148

Part 1 transmission systems and two-port systems; Terms and sizes
Part 2 transmission systems and two-port systems; Symmetry properties of linear two-ports
Part 3 transmission systems and quadrupole; Special damping dimensions

DIN 40150 terms for the organization of functional and structural units

DIN 40200 nominal value, limit value, rated value, rated data; Terms

DIN 40400 electrical thread for D-type fuses; Limits

DIN 40401 thread gauges for electrical threads for D-type fuses

Part 1 thread ring gauges
Part 2 thread plug gauges and thread go gauge body

DIN 40430 steel conduit thread ; Dimensions

DIN 40431 steel conduit thread

Part 1 thread gauges, thread ring gauges and reject ring gauges
Part 2 thread gauges, go thread plug gauges and reject plug gauges

DIN 40432 set taps - two-part set for armored steel pipe threads Pg 7 to Pg 48

DIN 40433 machine taps with stepped shank (overflow drill) for armored steel pipe threads Pg 7 to Pg 48

DIN 40434 round dies for armored steel pipe threads, Pg 7 to Pg 48

DIN 40435 machine taps for the holding thread (EG) for thread inserts made of wire for metric ISO threads according to DIN 8140 - holding standard thread EG M2 to EG M52 and holding fine thread EG M8 × 1 to EG M48 × 3 - dimensions

DIN 40501 aluminum for electrical engineering

Part 2 tubes, rods and profiles, technical delivery conditions

DIN 40540 lead accumulators - drive batteries 24 V, 48 V, 80 V with cells according to DIN EN 60254-2 for industrial trucks for use in potentially explosive areas (group II, category 2 and category 3) - dimensions, weights, design

~~DIN 40603 Laminate Products; Boards and strips made of synthetic resin pressed wood~~ , rule ~~setter~~ recommends the use of DIN EN 61061-1, DIN EN 61061-2, DIN EN 61061-3-1, DIN EN 61061-3-2

DIN 40604 vulcanized fiber

Part 1 panels, strips, strips, ribbons
Part 2 tubes and round bars

DIN 40612 mica products for electrical engineering; Boards, strips, dimensions

DIN 40613 mica products for electrical engineering; Insulating lamellas for commutators, dimensions

Part 2 molded parts for commutators made of split mica micanite, dimensions

DIN 40614 mica products for electrical engineering; Short grains and ribbons, dimensions

~~DIN 40618 Laminate products; Compression-molded flat tubes made of hard paper or hard tissue~~

DIN 40680 ceramic workpieces for electrical engineering

Part 1 general tolerances for dimensions
Part 2 general tolerances for shape

DIN 40686 surfaces of dense ceramic workpieces for electrical engineering

Supplement 1 information in drawings
Supplement 2 Measurement of roughness
Part 1 General
Part 4 Testing of soft solderable metal coverings
Part 5 Testing of brazed metal coverings
Part 6 high and low voltage isolators
Part 7 insulating parts

~~DIN 40705 heavy current switchgear; Identification colors for bare cables, electrical engineering~~ , replaced by DIN EN 60445

~~Supplement for heavy current switchgear; Identification colors for bare cables, electrical engineering~~

~~DIN 40719 circuit documents~~

~~Part 1 Terms, classification~~ , May 1995 replaced by DIN EN 61082-1 and -3

~~Part 2 Marking of electrical equipment~~ , December 2000 replaced by DIN EN 61346-1 and -2

~~Part 2 Supplement 1 Identification of electrical equipment, examples in alphabetical order~~ , December 2000 replaced by DIN EN 61346-1 and -2

~~Part 3 Rules for circuit diagrams in electrical engineering~~ , May 1995 replaced by DIN EN 61082-1 and -2

~~Part 4 Rules for~~ general circuit diagrams in ~~electrical engineering~~ , May 1995 replaced by DIN EN 61082-1 and -2

~~Part 5 electrical installation~~ , October 1996 replaced by DIN EN 61082-4

~~Part 6 rules for function plans~~ , December 2002 replaced by DIN EN 60848

~~Part 7 Rules for~~ maintenance-friendly ~~design~~ , May 1995 replaced by DIN EN 61082-1 and -2

~~Part 9 Execution of connection plans~~ , May 1995 replaced by DIN EN 61082-3

~~Part 10 Execution of layout plans~~ , October 1996 replaced by DIN EN 61082-4

~~Part 60 Execution of function plans for measuring, controlling, regulating~~

DIN 40729 accumulators; Galvanic secondary elements; Basic concepts

DIN 40734 Lead accumulators - Fixed closed cells with positive grid plates - Cells in plastic vessels; Capacities, main dimensions, weights

DIN 40736 lead accumulators; Fixed cells with positive armor plates; Cells in plastic vessels

Part 1 capacities, main dimensions, weights
Part 2 capacities, main dimensions, weights

DIN 40737 lead accumulators - Fixed batteries with positive armor plates

Part 3 Closed batteries in plastic block boxes; Capacities, main dimensions, weights

DIN 40738 lead accumulators; Fixed cells with positive large surface plates, narrow installation; Nominal capacities, main dimensions, weights

DIN 40739 lead accumulators - Fixed, closed batteries with positive grid plates - capacities, main dimensions, weights

DIN 40740 lead batteries; Fixed batteries, accessories; Ceramic funnel plugs, ceramic plugs, electrolyte level indicators

DIN 40741 Lead accumulators - Fixed, sealed batteries with positive grid plates and fixed electrolyte for industrial applications

Part 1 capacities, main dimensions, weights

DIN 40742 lead accumulators - Stationary sealed batteries with positive armor plates and fixed electrolyte - capacities, main dimensions, weights

DIN 40744 lead accumulators - Fixed sealed batteries with positive armor plates and fixed electrolyte in plastic block boxes - capacities, main dimensions, weights

DIN 40763 nickel-cadmium accumulators; Closed nickel-cadmium cells with positive and negative fiber structure plates

Part 2 cells in plastic containers, discharge currents, final discharge voltages, discharge times

DIN 40768 steel accumulators; Gas-tight nickel-cadmium accumulators, batteries 6 V and 12 V from button cells with ground plates, main dimensions, technical values

DIN 40771 closed nickel-cadmium accumulators

Part 1 cells in plastic vessels with pocket plates - nominal capacities - main dimensions
Part 2 cells in plastic vessels with fiber structure electrodes - nominal capacities - main dimensions
Part 3 cells in steel and plastic vessels; Installation types, dimensions

~~DIN 40900 Graphic symbols for circuit documents~~

~~Part 1-13~~ , August 1997 replaced by DIN EN 60617-1… 13
~~Bbl. 1 index~~ , July 1994 withdrawn without replacement

~~DIN 41009 Electrical communications engineering; Installation positions of components and counting of the contacts or connections~~

~~DIN 41015 Electrical communications engineering; Latches and latch strips; Requirements, tests~~

DIN 41071 pointer for electrical clocks

Part 1 wedge pointer
Part 2 hole pointer

DIN 41072 pointer shafts for electrical clocks; Connection dimensions

DIN 41073 pointer fastenings for electrical clocks; Connection dimensions

DIN 41074 suspension points on electrical wall clocks for interiors

DIN 41075 visibility for electrical clocks

DIN 41077 Two-pole plug for polarized slave clocks; Connection dimensions

DIN 41078 wall arms for slave clocks and single clocks; Connection dimensions

DIN 41079 Attachments of slave clockworks to dials; Connection dimensions

DIN 41080 time service

Part 1 Basic and General Terms
Part 2 Designation and structure of the time service centers (clock centers)
Part 3 Terms and names of the master clocks
Part 4 Terms, names and structure of slave clocks
Part 5 Terms, classification, naming and structure of the time switches
Part 6 Terms and classification of single clocks

DIN 41090 dials and hands for electric clocks; Overview and assignment

DIN 41091 dials for electrical clocks

Part 1 minute line dials
Part 3 hour mark dials
Part 4 number dials

DIN 41092 pointer for electrical clocks

Part 3 bar pointer

DIN 41096 Electric sirens for alternating voltages from 125 to 500 V.

Part 1 main dimensions and technical values
Part 2 Technical delivery conditions
Part 3 rating plate
Part 4 canopy

DIN 41097 pipe stand for electric sirens, 125 to 500 V ~

Part 1 standard design with and without protective intermediate insulation, compilation of the individual parts
Part 4 roof hatch
Part 6 accessories for electric sirens; Catwalk and exit board

DIN 41098 switch box for electric sirens, for AC voltages up to 380 V.

Part 1 main dimensions and circuit diagram
Part 2 Technical delivery conditions
Part 3 rating plate

DIN 41115 Cylindrical metal housings for electrical engineering, extruded

DIN 41116

Part 1 Cylindrical metal housing for electrical engineering with threaded pin, extruded

~~DIN 41215 relay and associated terms~~

DIN 41300 small transformers

Part 1 Identifying data, M, EI, SM and SE cores (EI low-waste)

~~DIN 41301 Magnetic materials for transformers~~ , replaced by DIN IEC 60740-2

DIN 41307 small transformers, transformers and chokes; Accessories

Part 3 pressure piece for cores type E ?, U? and 3 U?
Part 4 stirrup for cores type UI and 3UI
Part 5 retaining plates for cores type E, ED, EE, EF and EK; printed circuit, magnetic axis horizontal

DIN 41328 measuring method for electrolytic capacitors

Part 1 Measurement of the core resistance of multiple electrolytic capacitors
Part 4 Measurement of the DC voltage capacitance

~~DIN 41426 nominal values of resistors and capacitors~~

~~DIN 41429 color coding of resistors and capacitors~~ , replaced by DIN EN 60062

DIN 41488 electrical engineering, division dimensions for cabinets

Part 2 low-voltage switchgear
~~Part 3 high-voltage switchgear up to series 20 N (24 kV)~~

DIN 41494 design for electronic equipment

Supplement 1 482.6 mm construction; Application guide
Part 3 device stacking, dimensions
Part 8 482.6mm construction; Components on front panels; Installation conditions, dimensions

DIN 41543 side contacts for picture and oscillograph tubes; Main dimensions, seals

DIN 41569 device protection fuses; G fuse links 3 kV, interchangeable

DIN 41570 device protection fuses; G fuse links 1.2 kV, interchangeable

DIN 41571 device protection fuses; G fuse links 250 V, interchangeable

Part 2 medium slow (M)
Part 3 sluggish (T)

DIN 41576 device protection fuses; G fuse links with indicator 250 V, interchangeable

Part 1 quick (F)
Part 2 medium slow (M)

DIN 41577 device protection fuses; G-fuse links with indicator 250 V, unmistakable

Part 1 quick (F)
Part 2 medium slow (M)

DIN 41591 shaft ends for electrical-mechanical components

DIN 41593 Dimensions for threaded sockets for shaft-operated electrical-mechanical components with central mounting

DIN 41609 electron tubes; Electrode connections, numbering, labeling

DIN 41611 Solderless electrical connections

Part 4 clamp connections; Terms, requirements, tests
Part 9 stripping-free winding connections; Terms, parameters, requirements, tests

~~DIN 41612 connector for printed circuits, indirect mating, pitch 2.54 mm; several parts~~ , replaced in February 1999 by DIN EN 60603-2

DIN 41615 plug connector for slide-in technology, rectangular, contact pin diameter 1 and 1.6 mm

Part 1 Common installation features, design overview
Part 3 crimp connection, dimensions of designs C and D
Part 5 characteristic values, requirements, tests

DIN 41617 connector for printed circuits, indirect mating, pitch 2.5 mm

Part 1 Common installation features, design overview; Dimensions of designs L, M, N and S
Part 2 gauges, parameters, requirements, tests

DIN 41618 plug contact strips with blade contacts 2.5 mm × 1 mm

Part 1 main dimensions
Part 3 fitting and locking parts
Part 4 Housing and locking troughs for plug contact strips according to DIN 41618 and DIN 41622

DIN 41620 connectors for printed circuits (flat contacts, single row)

Part 1 socket strips, circuit boards

DIN 41622 plug contact strips with blade contacts 3 × 1 mm

Part 1 dimensions

DIN 41626 special contacts for multipole connectors

Part 1 high current contacts (type H); Dimensions, parameters, requirements, tests
Part 2 Concentric Contacts (Type C); Dimensions, parameters, requirements, tests

DIN 41631 rotary switch 41 mm × 54 mm; 13 and 26 division; Dimensions, parameters, requirements, tests

DIN 41632 rotary switch 28 mm × 39 mm; 12 division; Dimensions, parameters, requirements, tests

DIN 41633 rotary switch, 17 mm diameter; 10 and 12 divisions, axial solder connections; Dimensions, parameters, requirements, tests

DIN 41634 rotary switch, 17 mm diameter, 12 divisions, radial solder connections

Part 1 main dimensions

DIN 41635 snap switch; Types of construction, installation dimensions, connection types; Switching principle

DIN 41636 snap switches for communications technology

Part 1 Climatic test classes, measurement and test methods
Part 2 dimensions, characteristics, requirements, tests, type A
Part 3 dimensions, parameters, requirements, tests; Type B
Part 4 Dimensions, characteristics, requirements, tests; Type E
Part 5 Dimensions, characteristics, requirements, tests; Type D
Part 6 Dimensions, characteristics, requirements, tests; Type F

DIN 41640 measuring and testing methods for electrical-mechanical components

Part 54 test 23a: coupling resistance
Part 80 test A: contact force, resilient female contacts

DIN 41641 tools for solderless electrical connections; Hand crimping tools

Part 1 Terms, requirements, tests
Part 2 dimensions

~~DIN 41649 connector for switching and testing, 2 mm diameter, for printed circuits~~

~~Part 1 dimensions and installation instructions~~
~~Part 2 characteristics, requirements, tests~~

~~DIN 41650 framework standard for connectors~~

~~Part 1 connectors for printed circuits~~
~~Part 2 Rectangular connectors for frequencies below 3 MHz; General requirements and guidelines for the creation of design standards~~
~~Part 11 connectors for printed circuits; Design of construction standards~~
~~Part 12 Rectangular connectors for frequencies below 3 MHz; Design of construction standards~~

DIN 41652 plug connector for withdrawable technology, trapezoidal, round contacts Ø 1 mm

Part 1 Common installation features and dimensions; Design overview
Part 2 characteristics, requirements, tests
Part 3 Dimensions of type A; Solder connection for free wiring
Part 5 Dimensions of type C; Crimp connection for free wiring

~~DIN 41653 framework standard for function gauges for LF connectors; Calculation, general requirements~~

DIN 41673 device protection fuses; G fuse base, 6.3 A, 250 V, flat, with screw lock, for interchangeable G fuse links

DIN 41681 device protection fuses; G fuse holder, 500 V to 3 kV, for interchangeable G fuse links, G fuse holder, G screw cap

~~DIN 41682 Electrical communications engineering; Device protection fuses, G fuse holder, 6 A, 60 V, for interchangeable G fusible links with contact blades~~

DIN 41683 device protection fuses; G fuse links 6 kV, interchangeable

DIN 41684 device protection fuses; G fuse links 10 kV, interchangeable

DIN 41686 device protection fuses; G fuse links 500 V, interchangeable, medium time lag (M), fast (F)

~~DIN 41698 Electrical communications engineering; Plug; Requirements, tests~~

~~DIN 41700 Electrical communications engineering; Three-pole plug~~

~~DIN 41701 Electrical communications engineering; Quadruple plug~~

~~DIN 41714 Electrical communications engineering; Connector with circular contact arrangement 2-, 4- and 6-pin~~

~~Part 1 designs, dimensions~~

DIN 41715 Electrical communications engineering; Connectors for telecommunication connection units (TAE)

Part 1 Common features, design overview
Part 2 characteristics, requirements, tests
Part 3 types A, B, C and R
Part 4 Dimensions of types D, E, F and S
Part 5 Dimensions of types G, H and T

DIN 41746 stabilized power supply devices

Part 2 Guidelines for data sheet information, devices with AC output

~~DIN 41750 power converters (terms)~~ , regulators recommend the use of IEV 551

DIN 41751 power converter; Semiconductor converter sets and converter devices, types of cooling

DIN 41752 power converter; Semiconductor power converters; Performance indicator

DIN 41755 superimpositions on a direct voltage, periodic superimpositions

Part 1 terms, measurement methods

DIN 41756 power converter; Load on converters

Part 2 load types with direct current
Part 3 load types with alternating current

DIN 41762 power converter; Performance indicators for semiconductor converter sets

Part 2 single crystal semiconductor converter sets

DIN 41772 power converter; Semiconductor rectifier devices, forms and symbols of the characteristics

Supplement 1 Characteristic curve examples for chargers
Supplement 2 characteristic curve examples for devices in parallel operation with batteries

DIN 41773 power converter

Part 1 Semiconductor rectifier devices with IU characteristic for charging lead-acid batteries, guidelines
Part 2 Semiconductor rectifier devices with IU characteristic for charging nickel / cadmium batteries; conditions

DIN 41774 power converter; Semiconductor rectifiers with W characteristics for charging lead-acid batteries; conditions

DIN 41775 power converter; Semiconductor rectifier devices with W-characteristic for charging nickel / cadmium and nickel / iron batteries, requirements

DIN 41776 converter; Semiconductor rectifier devices with I characteristic for charging batteries; conditions

~~DIN 41782 rectifier diodes~~ , replaced by DIN IEC 60747-2

~~DIN 41786 thyristors, terms~~

~~DIN 41850 Integrated layer circuits; Materials~~

~~Part 2 procedure for the assessment of conductor pastes~~
~~Part 3 methods for the assessment of dielectric pastes~~

~~DIN 41855 optoelectronic semiconductor components~~

~~DIN 41868 housing for semiconductor components, housing type 10, main dimensions~~ , withdrawn in May 1998 without replacement

~~DIN 41869 housing for semiconductor components~~

~~Part 1 housing type 23, main dimensions~~
~~Part 2 housing type 34, main dimensions~~
~~Part 3 housing type 11, main dimensions~~
~~Part 4 housing type 12, main dimensions~~
~~Part 5 housing type 13, main dimensions~~
~~Part 6 housing type 14, main dimensions~~
~~Part 7 housing type 15, main dimensions~~

~~DIN 41873 housing for semiconductor components and integrated circuits; Case type 5, main dimensions~~ , withdrawn in November 1999 without replacement

~~DIN 41876 housing for semiconductor components, housing type 18, main dimensions~~ , withdrawn in May 1998 without replacement

~~DIN 41881 semiconductor components~~ , regulators recommend the use of DIN EN 60749

~~Part 2 requirements and testing, metal housing with ceramic insulation~~

DIN 41900 high-frequency power capacitors with nominal voltages above 1 kV and reactive powers above 0.2 kVA; Technical values

DIN 42013 spring washers for the axial adjustment of ball bearings in small motors

DIN 42020 shaft ends with tolerance ring for small electric motors

DIN 42021 stepper motors

Part 1 mounting dimensions, nameplate, electrical connections
Part 2 Terms, symbols, units and characteristics

DIN 42026 magnet segments for small motors

Part 1 Information on dimensions
Part 2 Principle of a device for dimensional testing
Part 4 Limits of Visible Defects

DIN 42027 servomotors; Classification, overview

DIN 42028 plug connections with flat plug connections for small motors

Part 1 design and dimensions

DIN 42111 contactless snap-action switches

Part 1 Terms, climatic test classes, test and measurement methods
Part 2 dimensions, characteristics, requirements, tests, type A

DIN 42112 push button switch with pressure point for printed circuits; Design A (12.5 × 12.5) mm, design B (10 × 10) mm

Part 1 dimensions, parameters, requirements, tests

DIN 42115 membrane switch

Part 1 General; Terms, parameters, requirements, tests
Part 2 membrane keyboards without pressure point; Characteristic values, requirements, tests
Part 3 membrane touch panels; Characteristic values, requirements, tests

~~DIN 42400 marking of connections~~ , replaced by DIN EN 60445

DIN 42402 connection designation for transformers and reactors

~~DIN 42403 connection designation for converters~~

DIN 42405 Marking of the connections of electrical time service devices and systems

DIN 42508 transformers - Oil-filled power transformers from 3150 kVA to 80,000 kVA and U _m to 123 kV

DIN 42513 transformers; Component identification for transformers and reactors (BKT)

DIN 42534 transformers; Bushings for indoor and outdoor use, series voltage 45 kV to 1000 A.

DIN 42537 transformers; Bushings for open air U _m 36 kV, for 12.5 to 25 kA

Part 1 compilation
Part 2 items
Part 3 attachment

DIN 42538 transformers; Fixing for bushings

DIN 42539 transformers; Bushings for indoor and outdoor use, row 3 N, for 250 A to 3150 A.

Part 1 compilation
Part 2 items

DIN 42544 transformers; Two-way taps, three-way taps; conditions

DIN 42545 transformers; Oil barrier DN 25; Requirements and testing

DIN 42547 transformers and reactors; Rating plates; execution

DIN 42548 residual oil drain for transformers

DIN 42552 transformers - oil level indicator with screw plug

DIN 42553 transformers; Air vent with snow protection; Filler neck

DIN 42558 transformers; Sealing pieces for venting and draining oil

DIN 42561 transformers; roll

Part 2 load> = 10 t
Part 3 center distances and gauges

DIN 42568 transformers; Outlet valve DN 15 and DN 32 for sampling and draining

DIN 42600 transducer for 50 Hz, U _m 0.72 kV to 52 kV

Part 1 basic requirements
Part 2 current transformer U _m = 0.72 kV and U _m = 1.2 kV - main dimensions
Part 3 voltage converter U _m 12 kV to 36 kV - large design, main dimensions, interior design
Part 4 support current transformer U _m = 12 kV - small design, main dimensions, interior design
Part 5 support current transformer U _m 12 kV to 36 kV - large design, main dimensions, interior design
Part 7 voltage converter U _m up to 12 kV - small design, main dimensions, interior design
Part 8 support current transformer U _m = 12 kV and U _m = 24 kV - narrow design, main dimensions, interior design
Part 9 support voltage transformer U _m = 12 kV and U _m = 24 kV - narrow design, main dimensions, interior design

DIN 42601 measuring transducer for 50 Hz, U _m from 72.5 kV and above - basic requirements

Correction 1

~~DIN 42673 three-phase motors with squirrel cage rotors, surface-cooled (standard motors)~~

~~Part 1 Surface-cooled three-phase motors with squirrel cage, type IM B 3, with roller bearings - mounting dimensions and assignment of the powers~~ , replaced by DIN EN 50347

~~DIN 42676 three-phase motors with squirrel cage rotors, internally cooled (standard motors)~~ , replaced by DIN EN 50347

DIN 42801 connection bolts for equipotential bonding lines

Part 2 potential equalization lines; Connection socket

DIN 42802 connector, touch-protected for electromedicine

DIN 42923 slide rails for electrical machines

DIN 42925 entries in the terminal box for three-phase motors with squirrel cage at rated voltages 400 V to 690 V.

~~DIN 42961 rating plates (motors, transformers, etc.)~~

~~DIN 42973 series of electrical machines~~ , replaced by DIN EN 50347

DIN 43021 railways and vehicles; Carbon brushes, dimensions and tolerances

DIN 43051 railways and vehicles; Carbon brush holder, connection dimensions

DIN 43053 railways and vehicles; Insulators for carbon brush holders

DIN 43054 railways and vehicles; Pressure pieces for carbon brush holders

DIN 43070 railways and vehicles; Carbon brush holder

Part 1 controls and tests
Part 2 measuring and testing instructions

DIN 43101 railways and vehicles; Electric rail vehicles

Part 1 terms, overview
Part 2 classification and designations
Part 3 terms for vehicle drives
Part 4 Designation for high-voltage devices
Part 5 names for transformers
Part 6 names for traction motor parts
Part 7 terms for auxiliary companies
Part 8 names for electrical devices of the switching and control equipment
Part 9 names for monitoring devices and safety devices
Part 10 names for lights and electrical heating devices for rail vehicles
Part 11 Names for controls
Part 12 terms for current bridges
Part 13 names for electrical devices and parts for structure and function
Part 14 names for electrical devices, individual parts for structure and function
Part 16 Terms for power electronics equipment

DIN 43102 railways and vehicles; Traction motors and auxiliary machines; Designation of the end faces and definition of the direction of rotation

DIN 43119 pivot bolt with ring groove for contact wire clamp for overhead lines

Part 2 pivot pin with thread

DIN 43120 Electric Railways; Cotter pin for contact wire clamp

DIN 43136 tension wires for contact line systems

DIN 43137 Electric Railways; Wires for grounding and power return

DIN 43138 Flexible ropes for contact line systems and return lines

DIN 43139 drums for contact wires

DIN 43147 electric railways

Part 1 hanger clamp for grooved contact wires and suspension ropes
- Correction 1
Part 2 hanger clamp for suspension ropes 35 mm², 70 mm² to 185 mm²
Part 3 hanger clamp; Sliding hanger clamp for suspension ropes

DIN 43148 wedge end clamps for railway lines

DIN 43151 contact wire web clamp for overhead lines

DIN 43153 thimbles for railway lines

DIN 43154 Open thimbles for wires and ropes

DIN 43155 clamp holder for overhead lines

DIN 43156 Electric Railways; Busbar, dimensions and parameters

DIN 43160 eye and fork for railway lines; Connection dimensions

DIN 43161 bolts for catenary systems

DIN 43162 turnbuckles for catenary systems; Closed shape

DIN 43165 Electric Railways; Screws with a cup point for contact line fittings

DIN 43167 rod insulators for overhead lines for operating voltages up to AC 1000 V and DC 1500 V

Part 1 compilation
Part 2 caps, U-bolts and hook screw
Part 3 insulator

DIN 43169 insulators for pantographs for tram vehicles

DIN 43173 railways and vehicles

Part 1 pantograph for trolleybuses, abbreviations and names for dimensions

DIN 43174 traction current collector for overhead lines; Dimension guidelines

DIN 43187 traction current collector for overhead lines for tram vehicles; Main dimensions

DIN 43200 rolling bearings for electrical machines in electric vehicles - storage, installation, lubrication, removal, cleaning and reuse

DIN 43201 pole shoes for rigid electromagnetic rail brakes

DIN 43203 Maintenance of electric traction motors and transmissions in local transport vehicles

DIN 43204 motor installation and gear connection dimensions; Travel motors for two-axle longitudinal drive with two hollow axle shafts

DIN 43207 heaters for trams; Main dimensions

DIN 43214 roof resistances for trams; Main dimensions of the resistance frames

DIN 43218 local transport vehicles; Signal for specifying pulling and braking forces

DIN 43237 rotary cam switches for railways and vehicles

DIN 43238 toggle switches for railways and vehicles; Dimensions and parameters

DIN 43239 cam auxiliary switch elements (pushbutton switches) for railways and vehicles

DIN 43262 rod for trolleybus pantograph; Main dimensions

DIN 43263 traction current collector for conductor rail; Dimension guidelines

DIN 43264 carbon contact pieces for traction current collectors

Part 1 carbon strips and sockets, profile 4223
Part 2 connection dimensions for carbon contact pieces

DIN 43265 traction current collector for conductor rail; Space requirements

DIN 43267 traction current collectors for overhead lines; Profile limitation for contact strips with horns

DIN 43302 switch lever for driving brake switch for trams; Connection dimensions

DIN 43313 Electric Railways; Driving switches for electric traction vehicles, direction levers

DIN 43451 single column disconnector - rated voltage 420 kV - connection and fastening dimensions, arrangement

DIN 43452 lever disconnector - rated voltage 420 kV - connection and fastening dimensions, arrangement

DIN 43453 single column earthing switch - rated voltage 420 kV - connection and fastening dimensions, arrangement

DIN 43454 circuit breaker

Part 1 rated voltage 123 kV - connection and fastening dimensions, arrangement
Part 2 nominal voltage 245 kV; Switch with a common base for all poles; Connection and fastening dimensions, arrangement
Part 3 rated voltage 420 kV - connection and fastening dimensions, arrangement
Part 4 rated voltage 245 kV - switch with a separate base for each pole

DIN 43455 symbols for the operation of high-voltage switchgear below 52 kV

DIN 43456 designation of the terminals for auxiliary circuits

Part 1 disconnector and earthing switch for voltages> = 52 kV
Part 2 circuit breakers for voltages> = 52 kV

DIN 43458 disconnectors, earthing switches, switch disconnectors from 52 kV - coupling elements for manual operation of motor drives

DIN 43459 couplings for gas connections on high-voltage equipment - dimensions, requirements

DIN 43460 contact assignment of connectors - circuit breakers with rated voltages <52 kV - assignment of auxiliary and control circuits

DIN 43530 accumulators; Electrolyte and top-up water

Part 1 General
Part 2 electrolyte for lead batteries
Part 4 Water and top-up water for lead batteries and alkaline batteries

DIN 43531 lead-acid batteries - 48 V drive batteries with L cells according to DIN EN 60254-2 for industrial trucks - dimensions, weights, design

DIN 43532 lead accumulators; Sealing plug with catalyst (recombiner plug)

DIN 43534 lead accumulators; Maintenance-free sealed accumulators with grid plates and fixed electrolyte; Capacities, voltages, main dimensions, structural features, requirements

DIN 43535 lead accumulators - drive batteries 24 V with cells series L according to DIN EN 60254-2 for industrial trucks - dimensions, weights, design

DIN 43536 lead-acid batteries - 80 V drive batteries with L cells according to DIN EN 60254-2 for industrial trucks - dimensions, weights, design

DIN 43537 lead accumulators - drive batteries 24 V, 36 V, 48 V, 72 V, 80 V for industrial trucks with cells of dimension series E according to DIN EN 60254-2 - dimensions, weights, design

DIN 43538 lead accumulators; Traction batteries for electric road vehicles; Block batteries in low-maintenance design; Nominal capacities, main dimensions

DIN 43539 accumulators; exams

Part 5 Maintenance-free sealed lead batteries with grid plates and fixed electrolyte

DIN 43547 work lights, 105 mm light aperture; Main and attachment dimensions

DIN 43549 Marking of the electrical components and lines of electric industrial trucks

DIN 43579 lead accumulators; Train lighting batteries

Part 3 terminals
Part 4 battery in carrier design
Part 5 carrier
Part 6 nameplate; Dimensions, labeling

DIN 43582 lead accumulators

Part 1 lighting batteries with armor plate cells for rail vehicles, block batteries 26 V; Capacities, main dimensions, weights

DIN 43585 single-pole connector, 250 A, 80 V, for trackless battery vehicles

Part 1 positive pole
Part 2 negative pole

DIN 43590 lead accumulators; Big starter block batteries

Part 1 main dimensions, tensions, weights
Part 2 block boxes
Part 3 terminal and cable lugs

DIN 43593 lead and steel accumulators; Name plate for vehicle batteries

DIN 43598 lead accumulators

Part 1 drive batteries 6 V and 12 V; Block batteries with armor plates; Nominal capacities, main dimensions, weights

DIN 43600 transport rollers for switching devices and transducers

DIN 43601 center distances and gauges of transport rollers of switching devices and transducers

DIN 43605 coupling for hydraulic pressure measurement connection on high voltage equipment - dimensions, requirements

DIN 43607 Three-pole disconnectors and switch disconnectors for indoor systems; Rated voltage 12 to 36 kV; Rated (operating) current 400 to 1250 A; Main dimensions

DIN 43620 low-voltage high-performance fuses with contact blades

Part 1 NH fuse-links for AC voltage 500 and 660 V and for DC voltage 440 V
Part 3 NH fuse bases for NH fuse links for AC voltage 500 and 660 V and for DC voltage 440 V
Part 6 NH bus-mounting fuse bases, NH bus-mounting fuse disconnectors and NH bus-mounting fuse switch disconnectors for mounting on busbars up to AC 660 V

DIN 43624 high voltage fuses, rated voltages 3 / 3.6 to 30/36 kV; Single pole fuse bases

DIN 43625 high voltage fuses; Nominal voltage 3.6 to 36 kV; Dimensions for fuse links

DIN 43627 house connection boxes for NH fuses size 00 to 100 A 500 V and size 1 to 250 A 500 V

Part 3 cable house connection boxes - wall installation cable house connection box for NH fuses size 00 to 100 A 500 V and size 1 to 250 A 500 V

DIN 43628 fuse boxes for line protection fuses

DIN 43629 cable distribution cabinet

Part 1 housing, mounting dimensions
Part 2 base, mounting dimensions
Part 3 internal structure; Installation dimensions

DIN 43633 rotary disconnector

Part 1 rated voltage 123 kV - connection and fastening dimensions, arrangement
Part 2 nominal voltage 245 kV; Connection and fastening dimensions, arrangement

DIN 43636 overhead line house connection boxes for NH fuses size 00 to 100 A 500 V

DIN 43637 overhead line house connection boxes

Part 4 for NH fuses size 00 to 100 A 500 V and size 1 to 250 A 500 V
Part 5 spacer for cable spacing in the roof stand tube

DIN 43649 rating plates for lifting magnets; Information for the labeling

DIN 43653 high-performance fuse links, sizes 1 to 3 and 00, with screw-on lugs, for semiconductor power converters

DIN 43655 double logarithm paper with axis division 2: 1

DIN 43656 Electrical indoor switchgear and high-voltage switchgear up to 36 kV; Coloring

DIN 43657 single column earthing switch - rated voltage 123 kV - connection and fastening dimensions, arrangement

DIN 43658 free dimension tolerances for outdoor switchgear

DIN 43660 module arrangement for electrical switchgear

DIN 43661 foundation rails in indoor electrical engineering systems; Information for construction and construction

DIN 43668 key for cell or cabinet doors of electrical switchgear; Double-bit key

DIN 43670 busbars made of aluminum; Dimensioning for continuous current

Part 2 busbars made of aluminum, copper-coated; Dimensioning for continuous current

DIN 43671 busbars made of copper; Dimensioning for continuous current

DIN 43673 busbar bores and screw connections

Part 1 busbars with rectangular cross-section
Part 2 busbars with U-cross section

DIN 43675 connecting pieces for connecting bolts

Part 1 flat connectors, 400 to 3150 A, of transformer and wall bushings less than 60 kV
Part 2 flat connectors of transformer bushings for open air; U _m 24 and 36 kV, 5 and 8 kA
Part 5 octagonal connection pieces, over 10000 A, of transformer bushings

DIN 43684 switchgear; Mosaic pictures, divisions

DIN 43718 Measurement, control, regulation; Front frames and front panels for I&C devices; Main dimensions

DIN 43719 Measurement, control, regulation; Mechanical grid systems for the installation of MSR devices

DIN 43735 control technology - Electrical temperature sensors - Exchangeable measuring inserts for resistance thermometers and thermocouples

DIN 43751 measurement, control, regulation; Digital measuring devices

Part 1 General definitions of terms, tests and data sheet information
Part 2 measuring devices for the measurement of analog quantities; Terms, tests and data sheet information
Part 3 measuring devices for measuring digital quantities; Terms, tests and data sheet information
Part 4 measuring devices for the measurement of time-related quantities; Terms, tests and data sheet information

DIN 43764 measurement, control, regulation; Electrical temperature sensors; Thermometer without attachment with exchangeable measuring insert

DIN 43765 Measurement, control, regulation; Electrical temperature sensors; Screw-in thermometer with screw-in thread G 1/2

DIN 43766 measurement, control, regulation; Electrical temperature sensors; Screw-in thermometer with screw-in thread G 1

DIN 43767 measurement, control, regulation; Electrical temperature sensors; Weld-in thermometer

DIN 43769 Measurement, control, regulation; Electrical temperature sensors; Thermometer without additional protective tube

DIN 43771 measurement, control, regulation; Electrical temperature sensors; Short response thermometer

DIN 43772 control technology - metal protective tubes and neck tubes for machine glass thermometers, dial thermometers, thermocouples and resistance thermometers - dimensions, materials, testing

Supplement 1 Overview of the protection tube / thermometer assignment
Supplement 2 Calculation of protective tubes

~~DIN 43780 indicating measuring devices~~ , replaced by DIN EN 60051

DIN 43790 basic rules for the design of dials and pointers

DIN 43801 electrical measuring devices

Part 1 spiral springs, dimensions

DIN 43802 line scales and pointers for indicating electrical measuring devices

Part 2 General Rules
Part 3 designs and dimensions
Part 4 graduations and figures

DIN 43807 electrical measuring devices (panel measuring devices)

DIN 43834 measurement, control, regulation; Fixing for MSR devices for panel mounting; Fastener; Fixing holes in the device

DIN 43835 fastening for indicating measuring instruments; Fastening element, cone on the housing, mounting arrangement

~~DIN 43853 meter boards; Main dimensions, connection dimensions~~

DIN 43854 sealing screws for electricity meters

DIN 43855 electricity meter; Signs

DIN 43856 electricity meters, tariff time switches and ripple control receivers; Circuit numbers, terminal designations, circuit diagrams

Part 2 Designation of auxiliary connections for tariff devices according to IEC report 61354: 1995

DIN 43857 electricity meter in insulating material housing, for direct connection, up to 60 A limit current

Part 1 main dimensions for alternating current meters
Part 2 main dimensions for three-phase electricity meters
Part 3 main dimensions of the terminal cover for alternating current meters
Part 4 main dimensions of the terminal cover for three-phase electricity meters
Part 5 main dimensions of the terminal cover for additional devices

DIN 43858 screwdriver bit with guide sleeve for electricity meters

DIN 43859 electricity meter for transducer connection; Main dimensions for three-phase electricity meters

DIN 43860 additional devices on the electricity meter according to DIN 43857 part 2

Part 1 mounting bracket
Part 2 ripple control receiver

DIN 43861 ripple control receiver

Part 1 for installation in lighting masts; Main dimensions
Part 2 main dimensions
Part 3 transmission protocols
Part 301 transmission protocols type A
Part 302 transmission protocols type B

DIN 43862 electricity meter - slide-in meter with static measuring mechanism - main dimensions

DIN 43863

Part 1 electricity meter; Tariff devices as an additional device for electricity meters; General requirements
Part 4 Meter data communication - IP telemetry
Part 5 Manufacturer-independent identification number for measuring devices
- Supplement 1 Explanations

~~DIN 43865 counter~~

DIN 43868 building site power distributor; Connection cabinet 400 V

Part 1 direct measurement up to 100 A.
Part 2 transformer measurement 100 A, 250 A and 400 A
Part 3 transformer measurement 630 A
Part 4 transducer measurement, internal wiring

DIN 43870 meter positions

Supplement 1 Application examples for the functional surfaces
Part 1 Dimensions based on a grid system
Part 2 functional surfaces
Part 3 wiring
Part 4 cover for wiring

DIN 43871 small distribution boards for built-in devices up to 63 A.

DIN 43880 installation devices - envelope dimensions and associated installation dimensions

DIN 44013 reference attenuation meter (objective reference attenuation measuring station OBDM); Structure and application

DIN 44030 control technology; Light barriers and light switches

Supplement 1 Formula symbols used
Part 1 terms
Part 2 measurement method

~~DIN 44070 temperature-dependent resistors, NTC thermistors~~

~~DIN 44080 temperature-dependent resistors, PTC thermistors~~

~~DIN 44081 temperature-dependent resistances; PTC thermistors, thermal machine protection, climatic application class HFF~~

~~DIN 44082 temperature-dependent resistances; Triple PTC thermistor; Thermal machine protection; climatic application class HFF~~

~~DIN 44300 information processing~~ . The standard was initially withdrawn in individual parts and then as a whole. It is being replaced by the ISO / IEC 2382: 2015 Information technology - Vocabulary standard.

~~Part 1: General Terms~~
~~Part 2: Presentation of information~~
~~Part 3: data structures~~
~~Part 4: programming~~
~~Part 5: Structure of digital computing systems~~
~~Part 6: Storage~~
~~Part 7: times~~
~~Part 8: Processing functions~~
~~Part 9: Processing Sequences~~

DIN 44401 Formula symbols in data sheets for electron tubes

DIN 44402 measurements of electrical properties of electron tubes

Supplement 1 IEC publications, DIN standards; Overview (including microwave tubes and photoelectronic components; tube sockets, terms, CECC system)
Part 1 Guidelines for measurement methods
Part 6 conditions for measuring the noise figure
Part 7 measuring methods for hissing and hum
Part 8 Measurement of the equivalent noise resistance
Part 14 Measurement of the emission current from hot cathodes for high vacuum tubes
Part 16 Measurement of electrode fault currents
Part 17 measurement methods for picture tubes
Part 19 measurement of noises as a result of mechanical or acoustic stimuli
Part 20 measurement of the cross modulation in AM-AM transfer
Part 21 measurement methods for cold cathode display tubes

DIN 44405 inner grid for oscillograph tubes

DIN 44531 Electric hot water heaters; Rules for connection instructions

DIN 44534 Electric hot water heaters; Hot water storage tank without thermal insulation (boiler), hanging arrangement, 15 and 80 liters, test

DIN 44535 Electric hot water heaters; Hot water storage tank without thermal insulation (boiler), hanging arrangement, 15 and 80 liters, requirements

DIN 44536 electric water heater; Boiling water devices up to 5 liters; Hanging arrangement, usage properties

Part 1 terms
Part 2 exams
Part 3 requirements

DIN 44543 Electric household grills; Terms

DIN 44544 Electric household grills; exam

DIN 44545 Electrical household grills; conditions

DIN 44549 Electric household hot plates; Usage properties

Part 1 terms
Part 2 exams
Part 3 requirements

~~DIN 44550 electric cookers for the household; Automatic hotplates and automatic glass ceramic cooking zones; Usage properties, tests~~

~~DIN 44551 electric cookers for the household; Automatic hotplates and automatic glass ceramic cooking zones; Usage properties, requirements~~

DIN 44558 Electric household egg cookers; Usage properties

Part 1 terms
Part 2 exams
Part 3 requirements

DIN 44561 Electric household ironing machines; Terms

DIN 44562 Electric household ironing machines; exam

DIN 44563 Electric household ironing machines; conditions

DIN 44704 handles for power tools

DIN 44717 Hand-held power tools; Suction nozzle; Connection dimensions

DIN 44766 resistance welding transformers

Part 2 suspension transformers; Dimensions, parameters
Part 3 transformers with flange connection; Dimensions, parameters

DIN 44767 device plug-in device for the primary connection of resistance welding transformers, 200 A, 550 V

DIN 44770 pneumatic welding cylinder, double-acting, without damping, double pressurized

Part 1 connection dimensions

DIN 44771 connection angle 45 and 90 °, for resistance welding equipment

~~DIN 44858 Electric household stoves, time switches, time switches and timer; Usage properties~~

~~Part 1 terms~~
~~Part 2 exams~~
~~Part 3 requirements~~

DIN 44871 electrical heating elements and heating inserts

Part 1 terms

DIN 44872 testing of electromagnesia

DIN 44874 electrical tubular heating elements with metal jacket

Part 1 calculation, execution and requirements
Part 2 diameter 6.5 mm and 8.5 mm; connections
Part 3 diameter 6.5 mm and 8.5 mm; Determination of aging and overload behavior

DIN 44875 Electrical tubular heating elements with metal jacket; application

DIN 44876 hexagonal nipple for electrical tubular heating elements with metal jacket

DIN 44879 hexagon nut, low, for nipples and screw heads for electrical tubular heaters with metal jacket

DIN 44897

Part 1 Electric Hot Water Heater; Mixer taps for open storage tanks and boilers, for arrangement above the table, connection dimensions and permissible pressure losses

DIN 44899 electric hot water heaters

Part 4 Calculation of the wall thickness of closed containers with a nominal capacity of up to 50 liters, safety requirements
Part 5 Guidelines for the calculation of the wall thickness of closed containers over 50 to 2000 liters
~~Part 6 nominal content up to 1000 liters; Conditions for quiet execution~~

DIN 44901 electric water heater; Hot water tank; Standing arrangement 200 to 1000 liters

Part 1 delivery dimensions for closed storage
Part 2 nominal intake

DIN 44902 Electric hot water heaters; Hot water storage tank, hanging arrangement

Part 1 5 to 15 liters, connection dimensions
Part 2 30 to 150 liters; Connection dimensions
Part 3 5 to 150 liters nominal intake
Part 4 connection values for open boilers

~~DIN 44904 dishes for electric cookers; Dimensions, requirements and testing~~

DIN 44921 electric heating cartridges with metal jacket

Part 1 dimensions
Part 2 high-performance heating cartridges; Dimensions
Part 3 requirements

DIN 44922 electrical screw-in heater

Part 1 with screw head G 1 1/2 B and tubular heating elements with metal jacket with a diameter of 6.5 and 8.5 mm; Dimensions and nominal mountings
Part 2 with screw head and heating cartridge with metal jacket; Dimensions
Part 3 requirements

DIN 44926 ceramic workpieces for electrical heating elements

Part 1 multi-hole pipes; Dimensions
Part 2 open multi-hole pipes; Dimensions
Part 3 spiral plate with connecting parts; Dimensions

DIN 44932 insulating beads

DIN 44954 Electric kitchen machines; Tin opener; Usage properties

Part 1 terms
Part 2 exams
Part 3 requirements

DIN 44973 Electric household humidifiers; Usage properties

Part 1 terms
Part 2 exams
Part 3 requirements

DIN 44974 Electric household fans; Usage properties

Part 1 terms
Part 2 exams
Part 3 requirements

DIN 45020 Terms and definitions from the field of wave propagation

DIN 45325 coaxial connector for the connection of radio reception antennas

Part 1 Mismatched Coaxial Connectors; Identical to IEC 60169-2, edition 1965 (status 1982)
Part 2 connector with straight and angled cable outlet

DIN 45330 cable networks for television signals, audio signals and interactive services - subscriber connection socket (TAD) for connecting subscriber terminals with the aid of coaxial receiver connection cables - main dimensions

~~DIN 45401 acoustics, electroacoustics; Standard frequencies for measurements~~ , August 1997 replaced by DIN EN ISO 266

DIN 45405 interference voltage measurement in sound engineering

~~DIN 45500 home studio technology ( Hi-Fi )~~

~~Part 1 General~~ , February 1996 replaced by DIN EN 61305-1
~~Part 2 minimum requirements for VHF receivers (tuners)~~ , July 1999 withdrawn without replacement
~~Part 3 Minimum Requirements for Record Players~~ , July 1999 withdrawn without replacement
~~Part 4 Minimum requirements for magnetic tape recorders for recording and playback~~ , July 1999 withdrawn without replacement
~~Part 5 minimum requirements for microphones~~ , withdrawn in July 1999 without replacement
~~Part 6 minimum requirements for amplifiers~~ , February 1996 replaced by DIN EN 61305-3
~~Part 7 minimum requirements for loudspeakers~~ , withdrawn without replacement in July 1999
~~Part 8 Minimum requirements for combinations and systems~~ , July 1999 withdrawn without replacement
~~Part 9 Minimum requirements for magnetic tapes 4 and 6 for sound recording~~ , February 1991 withdrawn without replacement
~~Part 10 Minimum Requirements for Headphones~~ , July 1999 withdrawn without replacement

DIN 45524 Determination of the tape speed in magnetic tape devices

~~DIN 45540 Sound recording and reproduction, phono devices; Measurement record, frequency record~~

DIN 45541 frequency measuring record St 33 and M 33

DIN 45542 Distortion measuring record St 33 and St 45

DIN 45543 measuring record for measuring the frequency response and the channel separation St 33

DIN 45544 rumble measuring record St 33 and M 33

DIN 45545 synchronous measurement records for 33 1/3 and 45 rpm

DIN 45549 scanning ability measuring record

DIN 45578 magnet systems for moving coil loudspeakers

Part 1 Terms, dimensions, measuring methods

DIN 45621 language for hearing tests

Part 1 Monosyllabic and polysyllabic words
~~Part 2 sentences~~
Part 3 words for the hearing test in children

DIN 45626 sound carrier with language for hearing test

Part 1 sound carrier with words according to DIN 45621-1 (recording 1969)

DIN 45630 basics of sound measurement

Part 1 Physical and subjective quantities of sound

DIN 45631 Calculation of the volume level and the loudness from the noise spectrum; Method according to E. Zwicker

Amendment 1 Calculation of the loudness of time-variant noises; with CD-ROM

DIN 45635 Noise measurement on machines; Airborne noise emission, envelope surface method

Supplement 1 form for measurement report (measurement protocol) for enveloping surface method
Part 1 framework procedure for 3 accuracy classes
Part 8 framework procedure
Part 11 internal combustion engines
Part 12 electrical switchgear
Part 14 air-cooled heat exchangers (air coolers)
Part 15 turbo machine sets in thermal power plants for power generation
Part 16 machine tools
Part 22 torches
Part 23 gear
Part 25 oxy-fuel and plasma burners and machines
Part 26 hydraulic pumps
Part 31 shredding machines
- Supplement 1 form for measurement report (measurement protocol); Shredding machines
Part 33 construction machinery
~~Part 34 bolt setting tools~~
Part 37 machines for processing plastic and rubber
Part 38 fans
Part 40 machine sets in hydropower plants and water pumping systems
Part 41 hydraulic units
- Supplement 1 form for measurement report (measurement protocol)
Part 45 continuous conveyor
Part 46 cooling towers
Part 47 chimneys
~~Part 49 surface treatment systems~~
Part 50 fittings
Part 51 cameras for moving processes
Part 52 pit diesel locomotives and diesel-powered pit rail floor railways
Part 53 diesel cats
Part 54 mine trackless vehicles
Part 55 trolleys with friction wheel and / or gear drive
Part 56 warm air generators, air heaters, fan parts of air treatment devices
Part 57 outboard motors
Part 60 still and motion picture projectors
~~Part 61 cranes~~
Part 62 machines and equipment for the production of stones, plates, pipes and prefabricated parts from concrete
Part 1601 machine tools for metalworking, special specifications for lathes
Part 1602 machine tools for metalworking, special specifications for drop forging hammers
Part 1603 machine tools for metalworking, special provisions for multi-purpose presses
Part 1605 Machine tools for metalworking; Special specifications for milling machines
Part 1606 Machine tools for metalworking; Special specifications for drilling machines
Part 1607 Machine tools for metalworking; Special specifications for gear hobbing machines
Part 1609 Machine tools for metalworking; Special specifications for cold circular saws
Part 1610 Machine tools for metalworking; Special specifications for grinding machines
Part 1650 woodworking machines, special provisions for planing machines
Part 1652 woodworking machines, special provisions for milling machines for one-sided processing
Part 1654 woodworking machines; Special specifications for multi-stage edge banding machines
Part 1655 woodworking machines; Special specifications for format processing and edge banding machines
Part 1657 woodworking machines; Special specifications for double abbreviation sawing machines
Part 1658 woodworking machines; Special specifications for single-blade lifting circular saws for cross-sections
Part 1659 woodworking machines; Special specifications for panel format circular saws
Part 1660 woodworking machines; Special specifications for routing machines
Part 1661 woodworking machines; Special specifications for table and band resaw machines
Part 1662 woodworking machines; Special specifications for one-sided tenoning and slotting machines
Part 1663 woodworking machines; Special specifications for grinding machines (for broad sides)
Part 1664 woodworking machines; Special specifications for multi-blade and multi-blade circular sawing machines for fine cuts
Part 1665 woodworking machines; Special specifications for tenoning and slotting machines for two-sided machining
Part 1666 woodworking machines; Special specifications for double and multi-blade circular saws for coarse cuts (double hemmers)
Part 1667 woodworking machines; Special specifications for double-stroke circular sawing machines (double miter sawing machines)

DIN 45640 external noise measurements on watercraft on inland waterways

Part 2 enveloping surface method for determining the sound power level

DIN 45641 averaging of sound levels

DIN 45642 measurement of traffic noise

DIN 45643 Measurement and assessment of aircraft noise

DIN 45645 Determination of assessment levels from measurements

Part 1 Noise immissions in the neighborhood
Part 2 Determination of the assessment level at the workplace for activities below the level range of the hearing hazard

DIN 45657 sound level meter - additional requirements for special measuring tasks

DIN 45661 vibration measuring devices - terms

DIN 45662 vibration measuring devices - General requirements and testing

DIN 45667 classification method for the detection of random vibrations

DIN 45669 measurement of vibration immissions

Part 1 vibration meter - requirements and tests
- Correction 1
Part 2 measurement method

DIN 45672 vibration measurement in the vicinity of rail traffic routes

Part 1 measurement method
- Correction 1
Part 2 evaluation method

DIN 45673 Mechanical vibrations - elastic elements of the superstructure of railways

Part 1 Terms, classification, test methods
Part 2 Determination of static and dynamic characteristic values in the operating track
Part 5 laboratory test methods for sub-ballast mats
- Supplement 1 test form; with CD-ROM
Part 6 laboratory test methods for the padding of concrete sleepers
- Supplement 1 test form; with CD-ROM
Part 7 laboratory test methods for elastic elements of mass-spring systems
- Supplement 1 test forms; with CD-ROM
Part 8 laboratory test methods for continuous elastic rail bearings
- Supplement 1 test form; with CD-ROM
Part 9 laboratory test method for discrete elastic rail bearings
- Supplement 1 test form, with CD-ROM

DIN 45676 Mechanical input impedances and transfer functions of the human body

DIN 45677 Mechanical input impedance of the human hand-arm system

Correction 1

DIN 45678 Mechanical vibrations - Articulated vehicles - Laboratory method for evaluating the vibrations of vehicle seats

DIN 45679 Mechanical vibrations - Measurement and evaluation of the gripping and pressure forces to assess the vibration load on the hand-arm system

DIN 45680 Measurement and evaluation of low-frequency noise emissions in the neighborhood

Supplement 1 Notes on assessing commercial systems

DIN 45681 Acoustics - Determination of the tonality of noises and determination of a tone allowance for the assessment of noise emissions

Correction 2

DIN 45682 noise emission plans

DIN 45684 Acoustics - Determination of aircraft noise immissions at landing sites

Part 1 calculation method
Part 2 Determination of acoustic and flight operational parameters

DIN 45687 acoustics - software products for the calculation of noise immission in the open air - quality requirements and test provisions

DIN 45688 Special requirements for the competence of test laboratories for noise and vibrations in the field of immission control

DIN 45691 noise quota

DIN 45692 Metrological simulation of the hearing perception sharpness

DIN 45910

Part 111; CECC 30401: 1985-09 Harmonized quality certification system for electronic components; Form for design specification: Plastic film MKT capacitors (CECC 30401)

Part 127 Harmonized quality certification system for electronic components; Design specification: Poled aluminum electrolytic capacitors with liquid electrolyte, DC 40 to 100 V (suitable for alternating current loads without direct polarization voltage), for general requirements, cylindrical metal housing with insulating cover, axial wire connections, climate category 40/085/56 (CECC 30301-045)

DIN 45980 Harmonized quality certification system for electronic components

Part 1; CECC 45000: 1977-04 Generic Specification: Space Charge Controlled Tubes
Part 1002; CECC 45002: 1977-04 Form Detail Specification: Industrial Generator Tubes
Part 1003; CECC 45003: 1977-04 Form for design specification: Small transmitter tubes with an anode power loss of up to 1 kW

DIN 45983 Harmonized quality certification system for electronic components

Part 1; CECC 46000: 1977-11 Generic Specification: Cold Cathode Display Tubes
Part 1001; CECC 46001: 1977-11 Form for detail specification: cold cathode display tubes

DIN 45999 Harmonized quality certification system for electronic components

Part 112; CECC 22111: 1983-02 Form for detail specification: High-frequency coaxial connector, series SMA (CECC 22111)
Part 113; CECC 22131: 1985-12 Form Detail Specification: High Frequency Coaxial Connectors; SMB series (CECC 22131)
Part 114; CECC 22141: 1985-12 Form Detail Specification: High Frequency Coaxial Connectors; SMC series (CECC 22141)
Part 115; CECC 22191: 1985-12 Form Detail Specification: High Frequency Coaxial Connectors; Series 7/16 (CECC 22191)

DIN 46001 Fixed handles for switchgear; Plastic with a pressed-in mandrel

DIN 46008 connection surfaces for earthing and protective conductor connection screws; Rated voltage below 52 kV

DIN 46011 earthing connection points in switchgears with rated voltages from 52 kV; Main dimensions, assignment

DIN 46062 starter for direct current motors and three-phase slip ring motors

DIN 46199 electrical switchgear

Part 7 Terminal designations on temperature-dependent switching devices for refrigerators and freezers

DIN 46200 current-carrying connection bolts up to 1600 A; Execution and assignment of the currents

DIN 46202 connection bolts for switching devices, measuring transformers and surge arresters from 52 kV

DIN 46206 connections for electrical equipment

Part 2 flat connections> = 40 A, main dimensions and assignment
Part 3 flat connections for devices from 52 kV; Main dimensions, assignment

DIN 46211 Stamped cable lugs for copper conductors

DIN 46215 punched solder lugs with hole

DIN 46216 punched solder lugs with slot

DIN 46218 punched cable eyelets; Crown shape

DIN 46220 Straight cable lugs, pressed, cast, for copper conductors

DIN 46221 angled cable lugs, pressed, cast, for copper conductors

DIN 46225 punched claw cable lugs with insulation, for insulated lines

DIN 46227 terminal lugs for copper conductors

DIN 46228 wire end sleeves

Part 1 tube shape without plastic sleeve
Part 2 crimp design with and without insulation
Part 3 encompassing the conductors, without insulation encapsulation
Part 4 tube shape with plastic sleeve
- Correction 1

DIN 46229 cable lugs; Designation of the connection sides

DIN 46230 cable lugs for solderless connections, pin shape, without insulating sleeve, for copper conductors

DIN 46231 pin cable lugs for solderless connections, insulated, for copper conductors

DIN 46234 cable lugs for solderless connections, ring shape, without insulating sleeve, for copper conductors

DIN 46235 cable lugs for press connections; Tab shape for copper conductors

~~DIN 46236 Punched clawed cable lugs with insulation for soldering~~

DIN 46237 crimp cable lugs for solderless connections, insulated, for copper conductors

DIN 46238 spring cable lugs for telecommunication cords with plastic insulation

~~DIN 46249 flat plug connections, not isolated~~

~~Part 1 requirements, tests~~

DIN 46252 cable lugs for telecommunication cords with plastic insulating sleeve

DIN 46257 cable lugs, connecting pipe for telecommunication cords with textile and rubber insulation

DIN 46260 bolt terminals for low voltage

Part 1 compilation
Part 2 parts list

DIN 46262 bolt terminals for low voltage

Part 1 isolators
Part 2 bushing bolts
Part 4 rings, clamps, washers, documents

DIN 46264 feed-through terminals with cast resin insulator for high voltage

DIN 46265 feed-through terminals with ceramic insulator for high voltage

Part 1 compilation
Part 2 parts list

DIN 46266 feed-through terminals for high voltage

Part 1 ceramic insulator
Part 2 bushing bolts
Part 3 flanges, washers

DIN 46267 compression connector, not tensile

Part 1 for copper conductors
Part 2 for aluminum ladder

~~DIN 46268 circular connectors~~

~~Part 1 round receptacles with locking tongues to snap into housing for round plug 3.5 mm~~
~~Part 2 round plug with ratchet tongues to snap into housing for round socket 3.5 mm~~

DIN 46274 socket terminals B.

DIN 46276 elastic tapes for busbars and flat connections

Part 1 Laminated-Flexible
Part 2 laminated-highly flexible

DIN 46284 two- and three-pole socket terminal strips (device terminals), 380 V ~ 440 V–, for conductors up to 2.5 mm²

DIN 46285 two- to three-pole socket terminal strips (lamp terminals), 380 V ~ 440 V–, for conductors up to 2.5 mm²

DIN 46288 terminal washers for conductor connections

DIN 46294 Rectangular terminal plates with 6 connecting bolts; Main dimensions

~~DIN 46295 Rectangular terminal plates with 6 slotted bolts~~

~~Part 1 main dimensions~~
~~Part 2 connecting webs and pressure nuts~~
~~Part 3 cable lugs~~

DIN 46300 installation material; Fixing screw for electricity meters and control units on meter panels

DIN 46329 cable lugs for press connections; Ring shape for aluminum conductors

~~DIN 46330 short receptacles without insulating sleeve~~

~~Part 1 for connector width 2.4~~
~~Part 2 for connector width 2.8~~

DIN 46339 connector with spring-loaded pin for test purposes on terminal blocks; Main dimensions for plug and socket

~~DIN 46340 receptacles with locking tongue to snap into housing~~

~~Part 1 for connector width 2.8~~
~~Part 3 for connector width 6.3~~
~~Part 4 for connector width 9.5~~
~~Part 5 for connector width 7.7~~

DIN 46341 connector for solderless connections, without insulating sleeve

Part 1 for copper conductors

~~DIN 46342 flat plug, straight and angled, with mounting hole~~

~~Part 1 for receptacles~~

~~DIN 46343 flat plug with locking tongue to snap into the housing~~

~~Part 1 for receptacle 2.8~~
~~Part 2 for receptacle 4.8~~
~~Part 3 for receptacle 6.3~~
~~Part 4 for receptacle 9.5~~

~~DIN 46345 receptacles with flat plugs for connector width 6.3~~

~~DIN 46346 receptacles for lateral conductor connection, for connector width 6.3~~

DIN 46380 Manufacture and transport of cables, lines and wires - terms

DIN 46391 spools for the delivery of cables, wires and ropes

Part 1 dimensions
Part 2 Technical delivery conditions for reels made of wood
Part 3 spools with flange diameter over 2800 mm; Dimensions
Part 4 Technical delivery conditions for coils made of steel

DIN 46392 reels for the delivery of insulated cables

Part 1 dimensions

DIN 46395 machine spools

DIN 46396 container; Container jacket inside diameter over 500 mm for the production of cables

Part 2 lines and wires

DIN 46397 spools for the production of wires

Part 11 spools with right-angled flanges, dimensions
Part 12 spools with right-angled flanges, technical delivery conditions
Part 21 spools with conical flanges, dimensions
Part 22 spools with conical flanges, technical delivery conditions
Part 31 test method

~~DIN 46400 flat products made of steel with special magnetic properties;~~

~~Part 1 electrical sheet and steel strip, cold-rolled, non-grain-oriented, finally annealed, technical delivery conditions~~ , replaced by DIN EN 10106
~~Part 1 Supplement 1 loss of magnetic reversal at frequencies above 100 Hz~~ , replaced by DIN EN 10106
~~Part 2 electrical steel sheet and strip, cold-rolled, not grain-oriented, not finally annealed, technical delivery conditions~~ , replaced by DIN EN 10341
~~Part 3 electrical sheet and strip, grain-oriented; Technical delivery conditions~~ , replaced by DIN EN 10107
~~Part 4 Electrical sheet and strip made of alloyed steels, cold-rolled, not grain-oriented, not finally annealed; Technical delivery conditions~~ , replaced by DIN EN 10341

DIN 46420 round wires made of aluminum, for electrical engineering, drawn; Dimensions

DIN 46424 switchgear; Pressed aluminum U-profiles for busbars

DIN 46425 round wires made of aluminum, for electrical engineering, precisely drawn; Dimensions

DIN 46431 round wires made of copper, for electrical engineering, precisely drawn; Dimensions

DIN 46452 flat wires for electrical engineering; Semi-finished product for winding wires, dimensions

DIN 46453 winding wires

Part 3 round wires, insulated, single or multiple wound; Test and measurement procedures
Part 6 wires made of resistance alloys; Determination of the temperature coefficient of the direct current resistance

DIN 46460 winding wires; Round wires made from resistance alloys

Part 1 blank; Technical delivery conditions
Part 2 insulated with paint, can be tinned directly, type V; Technical delivery conditions
Part 3 insulated with paint, heat-resistant with temperature index 180, type W 180; Technical delivery conditions

DIN 46463 winding wires, round wires made of nickel resistance alloys, bare; Dimensions, resistance values, weights

DIN 46464 winding wires, round wires made of resistance alloys, oxidized insulating; Technical delivery conditions

DIN 46465 winding wires, flat wires made of resistance alloys, bare; Dimensions, resistance values

~~DIN 47100 telecommunication~~ ~~cords ; Marking of the wires, colors of the outer sheaths~~ , withdrawn in November 1998 without replacement

DIN 47101 telecommunications cords; Design, dimensions, representation for drawings

DIN 47104 stranded wire for telecommunication cords

DIN 47223 HF plug connection 7/16; Characteristic impedance 50 O

DIN 47225 HF connector 1/3, characteristic impedance 50 O; Connection dimensions

DIN 47226 coaxial HF plug connection 1.8 / 5.6, characteristic impedance 50 O; Connection dimensions

DIN 47227 coaxial HF plug connection 9/21, hybrid plug, wave impedance 50 O; Connection dimensions

DIN 47231 coaxial HF plug connection 4.1 / 9.5, characteristic impedance 50 O; Connection dimensions

DIN 47232 coaxial HF connector 21/48

Part 1 with flange, wave impedance 50 O; Connection dimensions
Part 2 with union nut, wave impedance 50 O; Connection dimensions

DIN 47233 coaxial HF connector 29/66

Part 1 with flange, wave impedance 50 O; Connection dimensions
Part 2 with union nut, wave impedance 50 O; Connection dimensions

DIN 47234 coaxial HF connector 43/98, wave impedance 50 O; Connection dimensions

DIN 47235 HF plug connection 2 / 5.5; Characteristic impedance 50 O

DIN 47236 HF plug connection 4/11; Characteristic impedance 50 O

DIN 47237 HF plug connection 8/22; Characteristic impedance 50 O

DIN 47280

Part 2 HF connectors for wave impedance 50 O; Connector sizes, overview

DIN 47295 HF connector 1.6 / 5.6; Characteristic impedance 75 ohms

DIN 47297 HF plug connection 1.0 / 2.3; Characteristic impedance 50 O

DIN 47301 terms of high frequency line technology

Part 1 waveguide

DIN 47302 high frequency (HF) waveguide

Part 1 rectangular tube, dimensions, frequency range, attenuation
Part 2 round tube, dimensions, frequency range, attenuation
Part 3 square tube; Dimensions, frequency range, attenuation
Part 10 waveguide tube, requirements

DIN 47304 high frequency (HF) waveguide; Waveguide tube, tests

DIN 47386 coaxial high-frequency cables 0.8 / 4.5, fully insulated, highly flexible, Z = 75 O

DIN 47400 cords for telecommunications systems; Terms

DIN 47409 kink protection sleeves for telecommunication cords

DIN 47410 cords for telecommunication systems and information processing systems; Technical delivery conditions

DIN 47411 telecommunication cord with stranded wire, with PVC insulating sleeve and textile outer sleeve; veined, protected from humid air

DIN 47412 telecommunication cord with stranded wire

Part 1 with PVC insulating sleeve and PVC outer sleeve, core, splash-proof
Part 2 with PVC insulating sleeve without PVC outer sleeve, core, protected from humid air

DIN 47413 telecommunication cord with stranded wire, with PVC insulating sleeve and textile outer sleeve; in pairs, protected from humid air

DIN 47414 telecommunication cord with stranded wire, with PVC insulating sleeve and PVC outer sleeve; paired, splash-proof

DIN 47453 telecommunications cord with stranded wire, with textile insulating sleeve and textile outer sleeve; corrugated, for dry rooms

DIN 47460 telecommunications cord with stranded wire, with PVC insulating sleeve and textile outer sleeve; veined, protected from humid air

DIN 47461 telecommunications cord with stranded wire B, with PVC insulating sleeve and PVC outer sleeve; cored, splash-proof

DIN 47462 telecommunications cord with stranded wire, with PVC insulation sleeve; veined, braided, splash-proof

DIN 47463 telecommunications cord with stranded wire E, with PVC insulating sleeve and PVC outer sleeve; cored, splash-proof

DIN 47600 connection sleeves made of cast metal, for power cables up to 10 kV

Part 1 protective sleeves
Part 2 inner sleeves
Part 3 Assignment of the connecting sleeves to the paper-insulated cables, assignment of the copper connecting cables
Part 4 Internal structure for paper-insulated cables
Part 5 assembly instructions for paper-insulated cables
Part 6 Assignment of the connection sleeves to plastic-insulated cables 0.6 / 1 kV
Part 7 Internal structure for plastic-insulated cables 0.6 / 1 kV

DIN 47606 connection sleeves made of cast metal, for power cables with individual shielded cores from 10 kV to 30 kV; Protective sleeves

DIN 47608 connection strips with insulation displacement contacts for telecommunications systems

Part 2 requirements, testing

DIN 47609 Weatherproof distribution cabinets made of plastic for telecommunication, control and signal cables; Requirements, tests

DIN 47615 distribution boxes for telecommunications systems - dimensions, designs

DIN 47619 splicing of telecommunication cables

Part 1 cable with symmetrical stranding elements

DIN 47624 clamping sleeves made of plastic for telecommunication cables with metallic conductors and fiber optic cables - requirements and tests

DIN 47626 sheath terminals for telecommunication cables; Requirements, tests

DIN 47627 Solderless wire connections in sleeves for telecommunication cables; Requirements, tests

DIN 47630 house connection sleeves made of cast metal, up to 1000 V

Part 1 dimensions
Part 2 Inner structure for distribution cable NKBA and house connection cable NKBA
Part 3 Installation instructions for distribution cables NKBA and house connection cables NKBA
Part 4 Inner structure for distribution cable NKBA and house connection cable NYCY
Part 5 Installation instructions for distribution cable NKBA and house connection cable NYCY
Part 6 Inner structure for distribution cable NAKLEY and house connection cable NYCY
Part 7 Installation instructions for distribution cable NAKLEY and house connection cable NYCY
Part 8 Inner structure for distribution cable NYCWY and house connection cable NYCY
Part 9 Installation instructions for distribution cable NYCWY and house connection cable NYCY
Part 10 Inner structure for distribution cable NYY and house connection cable NYY
Part 11 Installation instructions for distribution cable NYY and house connection cable NYY

DIN 47634 sleeves made of heat-shrinkable plastic for telecommunication cables; Conditions; exams

DIN 47635 sealing grooves and folds for cable fittings made of cast metal

DIN 47642 cable clamps made of cast metal, for fittings

DIN 47643 sleeve cover for cable fittings

DIN 47645 caps made of heat-shrinkable plastic for telecommunication cables; Requirements, tests

DIN 47658 cable branch terminals in house connection sleeves for copper and aluminum conductors

DIN 47659 earthing clamp for corrugated concentric copper conductors up to 150 mm² cross section

DIN 48004 insulators for overhead power lines; Insulator for column insulators St with internal fastening, series voltages 10 to 30 kV

DIN 48006 insulators for overhead power lines

Part 1 long rod insulators LP with socket caps
Part 2 long rod insulators LG with fork caps
Part 3 solid core insulators VK

DIN 48016 threaded cap for fastening post insulators for overhead power lines up to 1000 V.

DIN 48031 rolls for cables and wires

DIN 48044 overhead power lines; Straight insulator supports

DIN 48045 overhead power lines; Curved insulator supports

DIN 48050 overhead power lines; Straight insulator support

Part 1 conical
Part 2 cylindrical

DIN 48051 overhead power lines

Part 1 Curved insulator supports, standard design
Part 3 Curved insulator supports to screw on

DIN 48055 insulator supports for telecommunications overhead lines

Part 1 Straight supports
Part 2 U-supports
Part 3 hook supports
Part 4 notches

DIN 48059 double clapper

DIN 48062 overhead power lines

Part 1 socket caps for insulators
Part 2 fork caps for insulators

DIN 48065

Part 1 loop eyelets without protective fittings, for U-brackets
Part 2 lobed eyelets with protective fittings attachment, for U-brackets
Part 3 lobed eyelets with protective fittings attachment, for connecting bolts

DIN 48066 joints

Part 1 supporting joints
Part 2 guy joints

DIN 48067

Part 1 pan eyes without protective fittings attachment
Part 2 pan eyes with protective fittings attachment

DIN 48068 Fastening of protective fittings; Connection dimensions

DIN 48069

Part 1 double eyelets without protective fitting attachment
Part 2 double eyelets with protective fittings attachment

DIN 48070 spacers

Part 1 triangle spacers
Part 2 trapezoidal and rectangular spacers

DIN 48072

Part 1 Branch clamps for aluminum cables and steel-aluminum cables for overhead power lines
Part 2 branch terminals for copper wires and copper ropes for overhead power lines

DIN 48073 connecting bolts

DIN 48074 straps and forks; Connection dimensions

DIN 48075

Part 1 current clamps for aluminum ropes and aluminum-steel ropes for overhead power lines
Part 2 current clamps for copper and bronze ropes for overhead power lines

DIN 48077

Part 1 Accessories for overhead lines and switchgear; Names of accessories for isolators, isolator chains and earth wire fastenings

DIN 48078

Part 1 fork brackets for connecting bolt connection on the bracket side
Part 2 fork brackets for bracket-side U-bracket connection

DIN 48083 inserts in presses for press connections

Part 1 Mechanical presses up to 15 and up to 60 kN nominal pressure force; Connection dimensions
Part 3 Hydraulic presses up to 300, up to 450 and up to 1000 kN nominal pressure force; Connection dimensions
Part 4 dimensions of the hexagonal compression mold

DIN 48084

Part 1 conductors and terminals in switchgear with nominal voltages from 60 kV; application

DIN 48085 compression connector, tensile strength

Part 1 for copper ropes
Part 2 for aluminum ropes
Part 3 for aluminum-steel ropes

DIN 48087 Portable devices for earthing and short-circuiting; Spindle shaft for connecting parts

DIN 48088 connection point for earthing and short-circuiting devices

Part 1 ball stud
Part 2 cylinder bolts with ring groove for connection to earth
Part 3 bracket fixed point for ladder (ropes, pipes)
Part 4 shell fixed point for ladder (ropes, pipes)
Part 5 connector for earthing lines

DIN 48108 Ceramic workpieces for electrical engineering; Sockets for insulating bodies

Part 1 corrugation
Part 2 splitting
Part 3 wave profile

DIN 48113 post insulators for switchgear and switchgear for voltages above 1 kV; Assignment of the terms for flexural strength

DIN 48115 screens for construction porcelain; Dimensions, determination of the creepage distance

DIN 48124 bushings for hydrogen-cooled generators

Part 1 naturally cooled bushings
Part 2 liquid-cooled bushings
Part 3 gas-cooled bushings

DIN 48125 wall penetrations for outdoor indoor systems, series 45N and 45S to 150N and 150S; Connection and fastening dimensions

DIN 48138 column insulators; Connection dimensions

DIN 48139 plate support insulators; Connection dimensions

DIN 48140 telecommunications overhead lines; Isolators RMk

DIN 48141 telecommunication overhead lines; Isolators RMd

DIN 48145 telecommunication overhead lines; Isolator RMü

DIN 48150 overhead power lines; Pillar insulators N, rated voltage below 1 kV

DIN 48152 overhead power lines; Z tension insulator, rated voltage below 1 kV

DIN 48154

Part 1 overhead power lines; Shackle insulators S, insulators
Part 2 overhead power lines; Shackle isolators S, bracket

DIN 48156 overhead power lines; Isolieri E, nominal voltage below 1 kV

Part 2 bracket

DIN 48170 roof stand for overhead power lines with nominal voltages up to 1000 V; Compilation, individual parts

DIN 48172 overhead power lines, nominal voltage below 1 kV; Roof stand insertion head, assembly, individual parts

DIN 48173 overhead power lines, nominal voltage below 1 kV; Roof anchors, assembly, individual parts

DIN 48174

Part 1 cross member for wooden masts for overhead power lines with rated voltages up to 1000 V.
Part 2 cross members for roof stands for overhead power lines with rated voltages up to 1000 V.
Part 3 cross beams for wooden masts and roof stands for overhead power lines with rated voltages up to 1000 V.

DIN 48175 roof post house entries

Part 1 standard design, protection class IP 40, for overhead power lines with nominal voltages up to 1000 V.
Part 2 special designs, protection class IP 54, for overhead power lines with nominal voltages up to 1000 V.

DIN 48176 roof stand strut for overhead power lines; Compilation, individual parts

DIN 48200 wires for cable ropes

Part 1 wires made of copper
Part 2 wires made of wrought copper alloys (Bz)
Part 7 wires made of steel copper (Staku)

DIN 48201

Part 1 wire ropes - ropes made of copper
Part 2 cables; Ropes made of wrought copper alloys (Bz)
~~Part 3 cables; Steel ropes~~
Part 7 cables; Steel copper ropes (Staku)

DIN 48203

Part 1 wires and ropes for cables made of copper; Technical delivery conditions
Part 2 wires and ropes for cables made of wrought copper alloys (Bz); Technical delivery conditions
~~Part 3 wires and ropes for lines made of steel; Technical delivery conditions~~
Part 7 wires and ropes for lines made of steel copper (Staku); Technical delivery conditions

DIN 48207 cable ropes; Laying of overhead lines

Part 2 Overhead lines with rated voltages above 1 kV - Procedure and equipment for laying conductors - Part 2: Pull grips made of steel
Part 3 Overhead lines with rated voltages above 1 kV - Methods and equipment for laying conductors - Part 3: Swirl connectors

DIN 48217 notch connector for overhead power lines and railway catenary systems

DIN 48300 wires for telecommunications overhead lines

DIN 48319 hook bolts for overhead power lines

DIN 48323 telecommunication and heavy current overhead lines; Turnbuckle for anchor ropes

DIN 48324 overhead communication lines and overhead power lines below 1 kV; Tie rod, serving plate, ring nut

DIN 48327 wire connecting sleeves for telecommunication lines

DIN 48328 telecommunications overhead lines and overhead power lines below 1 kV; Anchor blocks

DIN 48334 turnbuckles, closed form

DIN 48335 power and telecommunications overhead lines; Wire rope clamp

DIN 48342 power and telecommunications overhead lines; Wire rope tension clamp

DIN 48345 crampons for wooden poles

DIN 48350 telecommunication and heavy current overhead lines; Wooden poles

DIN 48351 overhead power lines; A masts

Supplement 1 formulas and calculation bases
Part 1 main dimensions
Part 2 bolts, nuts, washers

DIN 48353

Part 1 reinforced concrete masts and cross beams for single lines up to 20 kV
Part 2 reinforced concrete masts and cross beams; Guideline for the selection of masts

DIN 48500 power capacitors; Technical delivery conditions

DIN 48699 Marking of tools for working on live parts

~~DIN 48803 lightning protection system; Arrangement of components and assembly dimensions~~

~~DIN 48830 lightning protection system; description~~

DIN 49073 device boxes made of metal and insulating material for recessed installation to accommodate accessories up to 16 A 250 V and sockets according to DIN 49445, DIN 49447 and DIN EN 60309-2 (VDE 0623-20) up to 32 A 690 V - main dimensions

Correction 1
~~Part 1 for accommodating accessories up to 16 A 250 V.~~
~~Part 3 for recessed installation and for receiving sockets according to DIN~~

DIN 49075 cover plates for accessories for installation in device boxes

Part 1 with openings of Ø 45 mm and with fixed inserts; Dimensions
Part 2 with other openings than Ø 45 mm without inserts; Main dimensions

DIN 49076 openings in front panels of electrical installation ducts for the installation of installation devices; Main dimensions

DIN 49100 socket for two-pole sockets with protective contact DC 10 A 250 V, AC 16A 250 V and installation switches up to 16 A 250 V; Mounting dimensions

DIN 49200 installation switch up to 16 A 250 V.

DIN 49290 installation material; Switch designations

DIN 49325 D fuse base for front connection, with cover, for installation, E 16, 25 A, 500 V, for D-ring adapter inserts

DIN 49328 D-fuse base for front connection, for D-ring adapter inserts, D III 63 A 750 V

DIN 49335 D fuse base for front connection, for D screw adapter inserts, D III 63 A 750 V

DIN 49343 sign of inertia for D fuse links

DIN 49360 D fuses

Part 1 D screw cap E16, 25 A, 500 V
Part 2 D fuse links E 16, 500 V
Part 3 D-ring fitting inserts E 16 with functional dimensions for fitting insert key

DIN 49400 electrical installation material - household and collar plugs - overview

DIN 49406

Part 1 Two-pole plug for double-insulated devices 10 A, 250 V– and 16 A, 250 V ~; Main dimensions
Part 2 Two-pole plugs for double-insulated devices DC 10 A 250 V, AC 16 A 250 V, splash-proof

DIN 49437 adapter with two sockets 2.5 A 250 V.

DIN 49440 two-pole sockets with protective contact, DC 10 A / AC 16 A, 250 V.

Part 1 main dimensions
Part 2 Portable multiple sockets, combination of sockets 16 A 250 V and sockets 2.5 A 250 V - main dimensions
- Correction 1
Part 3 two-pole coupling sockets, splash-proof
Part 4 gauges for coupling sockets
Part 5 for installation in device boxes; Dimensions
Part 6 for use on assembly surfaces, for coupling sockets and for portable sockets; Dimensions

DIN 49441 Two-pin plug with protective contact, 10 A, 250 V≅ and 10 A, 250 V–, 16 A, 250 V∼

Part 2 Two-pin plug with protective contact DC 10 A 250 V, AC 16 A 250 V, splash-proof
Part 3 Two-pole plug with protective contact, DC 10 A 250 V, AC 16 A 250 V; Gauge for connector outer diameter; Testing device

DIN 49442 Two-pole socket outlets with protective contact, water pressure-tight, 10 A, 250 V≅ and 10 A, 250 V–, 16 A, 250 V∼; Main dimensions

DIN 49443 two-pole plug with protective contact; DC 10A 250 V AC 16A 250 V, watertight

DIN 49445 three-pole sockets with neutral and protective contact AC 16 A 400/230 V.

DIN 49447 three-pole sockets with neutral and protective contact AC 25 A 400/230 V.

DIN 49448 three-pin plug with N and protective contact 25 A AC 400/230 V; Main dimensions

DIN 49464 Two-pole round plug AC 2.5 A 250 V, non-reconnectable, with inclined pins for class II devices - main dimensions

DIN 49500 miniature circuit breaker (LS switch), 6 to 25 A, 415 V ~ and 250 V–, can be screwed into the DII fuse base

DIN 49670 gauges for fluorescent lamp sockets with protective tube

DIN 49732 lamp base K59d and K100d

DIN 49741 lamp base BX22d / 32

DIN 49748 lamp base K24s and K30s

DIN 49775 Electrical lights; Lug lights; Connection dimensions

DIN 49778

Part 7 light poles; Device bridge with sliding nuts; Dimensions, installation

DIN 49780 Electrical interior lights; Connection cable lengths for portable lights and total lengths of pendant lights

DIN 49781 suspension bracket for street lights on tension cables; Fixing dimensions and screw sizes

DIN 49782 street lighting; Symbols, representation in site plans

DIN 49802 preheating conditions for tubular fluorescent lamps operated without a starter; Identical to IEC 60882: 1986 (report)

DIN 49810 general service lamps

Part 3 shockproof lamps
Part 4 lamps for firedamp and explosion-proof pendant lights
Part 5 lamps for firedamp and explosion-proof hand lamps

DIN 49812 general service lamps

Part 1 tube lamps, bulb lamps
Part 2 teardrop lamps, large candle lamps
Part 3 mushroom lamps
Part 4 indicator lights for firedamp and explosion-proof indicator lights

DIN 49833 small candle lamps, small Illu lamps

DIN 49837 lamps for hand and work spotlights

DIN 49838

Part 2 telecommunication lamps with lamp base BA7s

DIN 49840 lamps for watercraft and trackless battery vehicles

Part 2 lamps for watercraft

DIN 49842 lamps for road traffic signals

Part 1 low voltage lamps for stationary signal lights
Part 2 high-voltage lamps for stationary signal lights
Part 3 requirements and testing

DIN 49846 dwarf lamps

Part 1 form K
Part 2 Form LA and Form LB
Part 3 Form LC and Form LD

DIN 49848 bicycle light bulbs

Part 1 form B
Part 2 form HS 3
Part 3 forms C, D, E, F and G
Part 4 form HS4
Part 5 form TF5

DIN 49850 glow lamps as indicator lamps

DIN 49851 dwarf lamps as indicator lamps

DIN 49852 tube and bulb lamps for display purposes

DIN 49860 metal halide lamps with radiation distribution similar to daylight

Part 2 sports facility lighting

DIN 49970 Electrical lights; Suspension tubes of metal

DIN 49972 classification and description of new lamps (IEC TR 60972: 1989 + A1: 1991)

DIN 49978 Electrical lights; Carrying pieces

DIN 49979 Electrical lights; Caps

DIN 49980 Electrical lights; Ceiling hooks, ceiling caps

DIN 49982 Electrical lights; Pipe hanger

DIN 49984 Electrical lights; Profile sealing ring for luminaire glass with flange according to DIN 49993

DIN 49985 Electrical lights; Flat sealing ring for luminaire glasses with screw edge according to DIN 49900

DIN 49990 Electrical lights; Luminaire glasses with screw rim

DIN 49992 Electrical lights; Luminaire glasses with a round perforated edge

DIN 49993 luminaire glasses with flange edge

DIN 49999 luminaire glasses

Part 1 Round handle, hole and flange edges, connection dimensions
Part 2 Round hole edges for screw ring and spring holder; Connection dimensions

Remarks

↑ named after the surgeon Louis Hubert Farabeuf (1841–1910).

[1] ter the surgeon Louis Hubert Farabeuf (1841–1910).